Showing 1–41 of 41 results for author: Werwiński, M

Electronic structure of UGe$_2$ at ambient pressure: comparison with X-ray photoemission spectra

Authors: M. Samsel-Czekała, M. Werwiński, A. Szajek, G. Chełkowska, R. Troć

Abstract: Based on experimental crystallographic data, electronic structure of UGe$_2$ have been calculated and compared with our results of X-ray photoelectron spectroscopy (XPS) measurements. We employed two different advanced full potential (FP) methods: FP-local-orbital (FPLO) and FP-linear augmented plane waves (Wien2k) codes for non-magnetic and ferromagnetic states. Starting from the local spin-densi… ▽ More Based on experimental crystallographic data, electronic structure of UGe$_2$ have been calculated and compared with our results of X-ray photoelectron spectroscopy (XPS) measurements. We employed two different advanced full potential (FP) methods: FP-local-orbital (FPLO) and FP-linear augmented plane waves (Wien2k) codes for non-magnetic and ferromagnetic states. Starting from the local spin-density approximation (LSDA) or generalised gradient approximation (GGA), we verified either the orbital polarisation (OP) correction or the GGA+U approach for the U 5f-electrons, changing Coulomb-repulsion energies U in the range 0-4 eV. Satisfying agreement was achieved between experimental and our calculated magnetic moments using ab-initio LSDA+OP and non-ab-initio GGA+U approaches, the latter for realistic U values of 2-3 eV. We proved by the LSDA+OP approach an existence of the Fermi surface nesting vector along the a axis, possibly responsible for the triplet superconducting pairing. The calculated data reveal predominantly an itinerant U 5f-electron character of bands near the Fermi level, EF, with only small contributions from the U 6d and Ge 4p states. The experimental XPS spectrum of valence bands (VB) also contains the sharp main 5f-electron peak at EF, a wide hump (around -2 eV), and broad small peaks at higher energies. In the calculated XPS spectrum, the width of the main 5f-electron peak varies between 0.8 and 1.4 eV, depending on a method used in computations, but the hump remains unresolved. A newly observed asymmetric 1-eV satellite in the experimental 4f-core XPS spectrum together with known 3-eV and 7-eV satellites suggest dual behaviour of U-5f-electrons in UGe$_2$, the feature is inferred also from the VB studies. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Journal ref: Intermetallics 19 (2011) 1411-1419

X-ray photoemission spectrum, electronic structure, and magnetism of UCu$_2$Si$_2$

Authors: J. A. Morkowski, G. Chełkowska, M. Werwiński, A. Szajek, R. Troć, C. Neise

Abstract: The room temperature X-ray photoemission spectrum of the ferromagnetic compound UCu$_2$Si$_2$ (T$_C$ = 100 K) was measured using an Al K$_α$ source. Related theoretical spectra were computed from densities of electronic states obtained in the local density approximation (LDA), the generalized gradient approximation (GGA), and using the GGA+U method. The calculated spectrum is in a good agreement w… ▽ More The room temperature X-ray photoemission spectrum of the ferromagnetic compound UCu$_2$Si$_2$ (T$_C$ = 100 K) was measured using an Al K$_α$ source. Related theoretical spectra were computed from densities of electronic states obtained in the local density approximation (LDA), the generalized gradient approximation (GGA), and using the GGA+U method. The calculated spectrum is in a good agreement with the experimental one. The spin polarized calculations based on the GGA+U approach as well as GGA/LSDA with orbital polarization (OP) corrections taken into account provide values of the total magnetic moment in reasonable agreement with the experimental values ranging between 1.6 and 2.0 $μ_B$/U atom. △ Less

Submitted 26 March, 2025; originally announced March 2025.

Journal ref: Journal of Alloys and Compounds 509 (2011) 6994-6998

Electronic structure of CeCo$_{1-x}$Fe$_x$Ge$_3$ studied by X-ray photoelectron spectroscopy and first-principles calculations

Authors: P. Skokowski, K. Synoradzki, M. Werwiński, A. Bajorek, G. Chełkowska, T. Toliński

Abstract: A transformation between the magnetically ordered CeCoGe$_3$ and heavy fermion CeFeGe$_3$ is isostructural but not isoelectronic, therefore the characterization of the electronic structure of the CeCo$_{1-x}$Fe$_x$Ge$_3$ series is of special importance. We report both the experimental investigation by the X-ray photoelectron spectroscopy (XPS) measurements and the first-principles calculations wit… ▽ More A transformation between the magnetically ordered CeCoGe$_3$ and heavy fermion CeFeGe$_3$ is isostructural but not isoelectronic, therefore the characterization of the electronic structure of the CeCo$_{1-x}$Fe$_x$Ge$_3$ series is of special importance. We report both the experimental investigation by the X-ray photoelectron spectroscopy (XPS) measurements and the first-principles calculations within the full-potential local-orbital (FPLO) scheme based on the density functional theory. Experimentally, we investigate mainly the valence band and the Ce $3d$ spectra, both giving the possibility to conclude about the level of the $f$ states localization. Computationally, we investigate the most characteristic CeCoGe$_3$, CeCo$_{0.5}$Fe$_{0.5}$Ge$_3$, and CeFeGe$_3$ compositions. Based on the electronic band structure results, we calculate the X-ray photoelectron spectra of the valence band. We consider the effects of the spin-orbit coupling and intra-atomic Hubbard U repulsion. Furthermore, we discuss the charge distribution and occupation of valence-band orbitals. The experimentally observed evolution of the 3$d$ band with the Fe concentration is related to the decrease of the number of electrons and reduction of the 3$d$ photoionization cross-sections. Calculations indicate that charge is transferred mainly from the Ce to Ge sites and the bondings are formed mainly by the Ce 5$d$, Fe/Co 3$d$, and Ge 4$p$ and 4$s$ orbitals. △ Less

Submitted 24 March, 2025; originally announced March 2025.

Journal ref: Journal of Alloys and Compounds 787 (2019) 744-750

Induced magnetic ordering in alloyed compounds based on Pauli paramagnet YCo$_2$

Authors: Z. Śniadecki, M. Werwiński, A. Szajek, U. K. Rößler, B. Idzikowski

Abstract: Intermetallic YCo$_2$ compound is a Pauli exchange-enhanced paramagnet. Structural and magnetic properties of rapidly quenched YCo$_2$ and YCo$_2$ alloyed with Nb or Ti are presented. Samples produced by melt spinning have been characterized by X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). The samples crystallize in MgCu$_2$-type phase with lattice constant a changing from 7.223… ▽ More Intermetallic YCo$_2$ compound is a Pauli exchange-enhanced paramagnet. Structural and magnetic properties of rapidly quenched YCo$_2$ and YCo$_2$ alloyed with Nb or Ti are presented. Samples produced by melt spinning have been characterized by X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). The samples crystallize in MgCu$_2$-type phase with lattice constant a changing from 7.223 A for YCo$_2$, through 7.213 A for Y$_{0.9}$Nb$_{0.1}$Co$_2$ to 7.192 A for Y$_{0.9}$Ti$_{0.1}$Co$_2$, where Y atoms are replaced by Nb or Ti atoms. Nanocrystalline phases can be produced by appropriate cooling rates for the solidification process. By the synthesis process free volumes, vacancies, and alloyed atoms are introduced into the YCo$_2$ intermetallic. Ab-initio calculations have been performed to investigate the effects of substitution on the spin-split electronic band structure in the ordered YCo$_2$. A ferrimagnetic ground state is found in the alloyed systems with substitution on the Y-site which is energetically favorable compared to point defects on Co-sites. However, the experimentally found increased magnetic ordering in alloyed YCo$_2$ appears to be based on microstructure effects. △ Less

Submitted 20 March, 2025; originally announced March 2025.

Journal ref: JOURNAL OF APPLIED PHYSICS 115, 17E129 (2014)

Normal and inverse magnetocaloric effects in structurally disordered Laves phase Y$_{1-x}$Gd$_{x}$Co$_{2}$ (0 $\leq$ x $\leq$ 1) compounds

Authors: Natalia Pierunek, Zbigniew Śniadecki, Mirosław Werwiński, Bartosz Wasilewski, Victorino Franco, Bogdan Idzikowski

Abstract: Magnetic and magnetocaloric properties of Y$_{1-x}$Gd$_{x}$Co$_{2}$ compounds, where x = 0.2, 0.4, 0.6, 0.8 and 1.0, were investigated experimentally and theoretically. Crystal structures were characterized by X-ray diffraction (Rietveld analysis) and investigated samples possess the MgCu$_{2}$-type single phase with Fd-3m space group. Melt-spinning process introduced a chemical and topological di… ▽ More Magnetic and magnetocaloric properties of Y$_{1-x}$Gd$_{x}$Co$_{2}$ compounds, where x = 0.2, 0.4, 0.6, 0.8 and 1.0, were investigated experimentally and theoretically. Crystal structures were characterized by X-ray diffraction (Rietveld analysis) and investigated samples possess the MgCu$_{2}$-type single phase with Fd-3m space group. Melt-spinning process introduced a chemical and topological disorder, which directly affected the magnetic properties. Refrigerant capacity (RC), strictly connected to the full width at half maximum $δ$TFWHM of the $Δ$S$_M$(T) curve and the maximum of magnetic entropy changes $Δ$S$_{Mpk}$(T)(T,$Δ$H), increases from 29 to 148 J/kg with replacement of Y by Gd atoms from x = 0.2 to x = 0.8. RC and $δ$TFWHM indicate the presence of disorder. Temperature dependences of magnetic entropy change $Δ$S$_M$(T,$Δ$H) and RC were measured in as-quenched and annealed state for Y$_{0.4}$Gd$_{0.6}$Co$_{2}$. This particular composition was chosen for detailed investigation mainly due to its Curie point (T$_C$ = 282 K), which is close to the room temperature. After isothermal annealing ($τ_a$ = 60 min, Ta = 700$^o$C) RC decreased from 122 to 104 J/kg, which clearly indicates the homogenization of the heat treated sample. Furthermore, observed inverse magnetocaloric effect is associated with the presence of antiferromagnetically coupled Gd and Co magnetic moments. The phase transition temperature increases with increasing Gd content from 74 to 407 K for Y$_{0.8}$Gd$_{0.2}$Co$_{2}$ and GdCo2, respectively. Within the FPLO-LDA DFT method, the non-magnetic ground state for YCo$_{2}$ and the magnetic ground state for GdCo$_{2}$ are predicted in agreement with experiment. The dependence of calculated total and species-resolved magnetic moments on Gd concentration reasonably agrees with available experimental data. △ Less

Submitted 20 March, 2025; originally announced March 2025.

Journal ref: Journal of Alloys and Compounds 702 (2017) 258-265

Influence of structural disorder on magnetic properties and electronic structure of YCo$_2$

Authors: Z. Śniadecki, N. Pierunek, B. Idzikowski, B. Wasilewski, M. Werwiński, U. K. Rößler, Yu. Ivanisenko

Abstract: In this paper, the changes of magnetic properties with increasing disorder in the exchange enhanced Pauli paramagnet YCo$_2$ are discussed. The structural disorder is initially introduced by rapid quenching, while further changes on micro-/nanoscale are caused by a high pressure torsion (HPT). Values of the magnetic moment determined for the plastically deformed ribbons reach 0.10 $μ_B$/Co atom (f… ▽ More In this paper, the changes of magnetic properties with increasing disorder in the exchange enhanced Pauli paramagnet YCo$_2$ are discussed. The structural disorder is initially introduced by rapid quenching, while further changes on micro-/nanoscale are caused by a high pressure torsion (HPT). Values of the magnetic moment determined for the plastically deformed ribbons reach 0.10 $μ_B$/Co atom (for a sample subjected to the deformation at a pressure of 4 GPa) and 0.25 $μ_B$/Co (6 GPa) at 2 K. Magnetic moment arise not only from the surface of nanocrystals but also from volume. Ab initio calculations explained the influence of chemical disorder and different types of structural defects on the electronic structure and magnetic properties of YCo2-based Laves phases. The calculated magnetic ground states are in qualitative agreement with experimental results for all considered structures with point defects. △ Less

Submitted 20 March, 2025; originally announced March 2025.

Journal ref: Physical Review B 98, 094418 (2018)

Ab initio study of pressure-induced phase transition, band gaps and X-ray photoemission valence band spectra of YVO$_4$

Authors: M. Werwiński, J. Kaczkowski, P. Leśniak, W. L. Malinowski, A. Szajek, A. Szczeszak, S. Lis

Abstract: High-pressure induced structural transition from zircon-type phase into scheelite-type phase in YVO$_4$ is studied using ab initio calculations. Several structures with compressed volumes are evaluated, where for every considered volume the c/a ratio and atomic positions are optimised. The transition pressure and transition volume change are calculated. The reports on YVO$_4$ electronic structure… ▽ More High-pressure induced structural transition from zircon-type phase into scheelite-type phase in YVO$_4$ is studied using ab initio calculations. Several structures with compressed volumes are evaluated, where for every considered volume the c/a ratio and atomic positions are optimised. The transition pressure and transition volume change are calculated. The reports on YVO$_4$ electronic structure and electronic band gap behaviour are followed by results of X-Ray photoemission spectra XPS calculations. Most of our theoretical predictions are compared with experimental results taken from literature. △ Less

Submitted 19 March, 2025; originally announced March 2025.

Journal ref: Computational Materials Science 117 (2016) 98-102

Effect of Gd and Co content on electrochemical and electronic properties of La$_{1.5}$Mg$_{0.5}$Ni$_7$ alloys: a combined experimental and first-principles study

Authors: Mirosław Werwiński, Andrzej Szajek, Agnieszka Marczyńska, Lesław Smardz, Marek Nowak, Mieczysław Jurczyk

Abstract: In this work, we investigate the effect of Gd and Co substitutions on the electrochemical and electronic properties of La$_{1.5}$Mg$_{0.5}$Ni$_7$ alloy. Two series of La$_{1.5-x}$Gd$_x$Mg$_{0.5}$Ni$_7$ ($x$ = 0.0, 0.25, 1.0) and La$_{1.5}$Mg$_{0.5}$Ni$_{7-y}$Co$_y$ ($y$ = 0.0, 0.5, 1.5) alloys are produced using mechanical alloying technique. The X-ray diffraction indicates multiphase character of… ▽ More In this work, we investigate the effect of Gd and Co substitutions on the electrochemical and electronic properties of La$_{1.5}$Mg$_{0.5}$Ni$_7$ alloy. Two series of La$_{1.5-x}$Gd$_x$Mg$_{0.5}$Ni$_7$ ($x$ = 0.0, 0.25, 1.0) and La$_{1.5}$Mg$_{0.5}$Ni$_{7-y}$Co$_y$ ($y$ = 0.0, 0.5, 1.5) alloys are produced using mechanical alloying technique. The X-ray diffraction indicates multiphase character of the samples, with the majority of hexagonal Ce$_2$Ni$_7$-type and rhombohedral Gd$_2$Co$_7$-type structures of (La,Mg)$_2$Ni$_7$ phase. Partial substitutions of La by Gd or Ni by Co in La$_{1.5}$Mg$_{0.5}$Ni$_7$ phase result in increase of cycle stability of the metal hydride (MH$_x$) electrodes. All considered alloys reach the maximum discharge capacity after three charging-discharging cycles. Two optimal compositions, in respect of electrochemical properties, are subsequently investigated by the X-ray photoelectron spectroscopy (XPS). The experimental analysis of the valence band is further extended by the density functional theory (DFT) calculations. We also discuss the effects of alloying and site preference of dopants on the position of the van Hove-type singularity, as observed in the electronic densities of states (DOS) in proximity of the Fermi level. △ Less

Submitted 19 March, 2025; originally announced March 2025.

Journal ref: Journal of Alloys and Compounds 773 (2019) 131-139

Effect of substitution La by Mg on electrochemical and electronic properties in La$_{2-x}$Mg$_x$Ni$_7$ alloys: a combined experimental and ab initio studies

Authors: Mirosław Werwiński, Andrzej Szajek, Agnieszka Marczyńska, Lesław Smardz, Marek Nowak, Mieczysław Jurczyk

Abstract: La-Mg-Ni-based alloys are promising negative electrode materials for 3rd generation of Ni-MH$_x$ batteries. In this work, we investigate the effect of Mg substitution on the electrochemical and electronic properties of La$_{2-x}$Mg$_x$Ni$_7$ materials. The mechanical alloying technique is used to produce a series of La$_{2-x}$Mg$_x$Ni$_7$ alloys ($x$ = 0.00, 0.25, 0.50 and 0.75). The X-ray diffrac… ▽ More La-Mg-Ni-based alloys are promising negative electrode materials for 3rd generation of Ni-MH$_x$ batteries. In this work, we investigate the effect of Mg substitution on the electrochemical and electronic properties of La$_{2-x}$Mg$_x$Ni$_7$ materials. The mechanical alloying technique is used to produce a series of La$_{2-x}$Mg$_x$Ni$_7$ alloys ($x$ = 0.00, 0.25, 0.50 and 0.75). The X-ray diffraction measurements indicate multiphase character of the samples with majority (La,Mg)$_2$Ni$_7$ phases of hexagonal Ce$_2$Ni$_7$-type and rhombohedral Gd$_2$Co$_7$-type. Electrochemical measurements show how the maximum discharge capacity ($C_{max}$) increases with Mg concentration and that reach the highest value of 304 mAh/g for La$_{1.5}$Mg$_{0.5}$Ni$_7$ ($x$ = 0.5). The experimental efforts are followed by the density functional theory (DFT) calculations performed with the full-potential local-orbital minimum-basis scheme (FPLO). To simulate chemical disorder, we use the coherent potential approximation (CPA). The calculations are focused on the La$_{1.5}$Mg$_{0.5}$Ni$_7$ composition with the highest measured value of $C_{max}$. Additionally, several other structures are considered as reference points. We find that hexagonal and rhombohedral structures of La$_2$Ni$_7$ have almost identical total energies, which is in a good agreement with a coexistence of both phases in the samples. The calculated site preferences of Mg in both Ce$_2$Ni$_7$-type and Gd$_2$Co$_7$-type La$_{1.5}$Mg$_{0.5}$Ni$_7$ phases are consistent with the previous experimental data. Furthermore, the valence band of the nanocrystalline La$_{1.5}$Mg$_{0.5}$Ni$_7$ sample is investigated by X-ray photoelectron spectroscopy (XPS). The experimental XPS are interpreted based on the corresponding spectra calculated with DFT. △ Less

Submitted 19 March, 2025; originally announced March 2025.

Journal ref: Journal of Alloys and Compounds 763 (2018) 951-959

Curie temperature study of the Y(Fe$_{1-x}$Co$_x$)$_2$ and Zr(Fe$_{1-x}$Co$_x$)$_2$ systems using mean-field theory and Monte Carlo method

Authors: Bartosz Wasilewski, Wojciech Marciniak, Mirosław Werwiński

Abstract: The cubic Laves phases including YFe$_2$, YCo$_2$, ZrFe$_2$, and ZrCo$_2$ are considered as promising candidates for application in hydrogen storage and magnetic refrigeration. While YFe$_2$ and ZrFe$_2$ are ferromagnets, alloying with Co decreases magnetic moments and Curie temperatures ($T_\mathrm{C}$) of pseudobinary Zr(Fe$_{1-x}$Co$_x$)$_2$ and Y(Fe$_{1-x}$Co$_x$)$_2$ systems, leading to the p… ▽ More The cubic Laves phases including YFe$_2$, YCo$_2$, ZrFe$_2$, and ZrCo$_2$ are considered as promising candidates for application in hydrogen storage and magnetic refrigeration. While YFe$_2$ and ZrFe$_2$ are ferromagnets, alloying with Co decreases magnetic moments and Curie temperatures ($T_\mathrm{C}$) of pseudobinary Zr(Fe$_{1-x}$Co$_x$)$_2$ and Y(Fe$_{1-x}$Co$_x$)$_2$ systems, leading to the paramagnetic states of YCo$_2$ and ZrCo$_2$. The following study focus on the investigation of Curie temperature of the Y(Fe$_{1-x}$Co$_x$)$_2$ and Zr(Fe$_{1-x}$Co$_x$)$_2$ system from first principles. To do it, the Monte Carlo (MC) simulations and the mean field theory (MFT) based on the disordered local moments (DLM) calculations are used. The DLM-MFT results agree qualitatively with the experiment and preserve the characteristic features of $T_\mathrm{C}(x)$ dependencies for both Y(Fe$_{1-x}$Co$_x$)$_2$ and Zr(Fe$_{1-x}$Co$_x$)$_2$. However, we have encountered complications in the Co-rich regions due to failure of the local density approximation (LDA) in describing the Co magnetic moment in the DLM state. The analysis of Fe-Fe exchange couplings for YFe$_2$ and ZrFe$_2$ phases indicates that the nearest-neighbor interactions play the main role in the formation of $T_{\mathrm{C}}$. △ Less

Submitted 18 March, 2025; originally announced March 2025.

Journal ref: Journal of Physics D: Applied Physics, 51 (2018) 175001

Occupation deficiency in layered structures of UNi$_{x}$Sb$_2$ ($ 0 \leq x \leq 1 $) studied by density functional theory supercell calculations

Authors: Mirosław Werwiński, Andrzej Szajek

Abstract: The five crystal structures of selected UNi$_{x}$Sb$_2$ compositions are investigated by density functional theory supercell calculations. The considered phases are USb$_2$, UNi$_{0.33}$Sb$_2$, UNi$_{0.5}$Sb$_2$, UNi$_{0.66}$Sb$_2$, and UNiSb$_2$ ($x$ = 0, 1/3, 1/2, 2/3, 1). The occupation deficiency of Ni is modeled by removing the Ni layers from constructed supercells, followed by relaxation of… ▽ More The five crystal structures of selected UNi$_{x}$Sb$_2$ compositions are investigated by density functional theory supercell calculations. The considered phases are USb$_2$, UNi$_{0.33}$Sb$_2$, UNi$_{0.5}$Sb$_2$, UNi$_{0.66}$Sb$_2$, and UNiSb$_2$ ($x$ = 0, 1/3, 1/2, 2/3, 1). The occupation deficiency of Ni is modeled by removing the Ni layers from constructed supercells, followed by relaxation of the structures. A linear dependence of the lattice parameter $c$ versus Ni concentration $x$ is observed, same, fulfilling the empirical Vegard's law. The agreement between results of our calculations with the empirical data from literature confirms the validity of our approach of supercells with empty Ni layers, at least in predicting of lattice parameters. The calculated with orbital polarization magnetic moments on uranium atoms decrease from 1.70 $μ_{\mathrm{B}}$ to 1.61 $μ_{\mathrm{B}}$ with increasing Ni concentration $x$. In comparison to available empirical data of USb$_2$ and UNi$_{0.5}$Sb$_2$, the magnetic moments calculated with orbital polarization are less than 10% smaller. △ Less

Submitted 18 March, 2025; originally announced March 2025.

Journal ref: Computational Materials Science 134 (2017) 166-170

Perpendicular magnetic anisotropy in Au/FeCo/Au ultrathin films: Combined experimental and first-principles study

Authors: Justyn Snarski-Adamski, Hubert Głowiński, Justyna Rychły-Gruszecka, Piotr Kuświk, Mirosław Werwiński

Abstract: Magnetic tunnel junctions with a magnetic layer with perpendicular anisotropy are currently used in computer memories that do not require voltage sustaining. An example of layers with perpendicular magnetic anisotropy are ultrathin FeCo films on Au substrate. Here, we present an experimental and computational study of Fe$_{0.75}$Co$_{0.25}$ layers with a thickness up to two nanometers. The investi… ▽ More Magnetic tunnel junctions with a magnetic layer with perpendicular anisotropy are currently used in computer memories that do not require voltage sustaining. An example of layers with perpendicular magnetic anisotropy are ultrathin FeCo films on Au substrate. Here, we present an experimental and computational study of Fe$_{0.75}$Co$_{0.25}$ layers with a thickness up to two nanometers. The investigated FeCo layers are surrounded on both sides by Au layers. In experiment, we found perpendicular magnetic anisotropy in FeCo polycrystalline films with a thickness below 0.74 nm (five atomic monolayers). We also measured a strong surface contribution to effective magnetic anisotropy. From the density functional theory we determined structural, electronic, and magnetic properties of the FeCo films. The calculations showed an irregular dependence of magnetic anisotropy on FeCo layer thickness. We observed perpendicular anisotropy for one- and three-atom FeCo monolayers and in-plane anisotropy for two- and four-atom monolayers. However, the determination of running averages of magnetic anisotropy (of three successive thicknesses of atomic monolayers) leads to a close linear thickness dependence of magnetic anisotropy, similar to the experimental result. The reason why the properties of the several-atom-thick FeCo layers differ so significantly from those of the bulk parent material is the disappearance of the central region of the layer whose properties approximate those of the bulk, and instead the existence of near-interface regions with properties altered by the presence of discontinuities. △ Less

Submitted 5 February, 2025; originally announced February 2025.

Giant magnetocrystalline anisotropy energy in Fe--Co alloy under uniaxial compression: first-principles prediction

Authors: Wojciech Marciniak, Joanna Marciniak, José Ángel Castellanos-Reyes, Mirosław Werwiński

Abstract: Uniaxially strained Fe--Co disordered alloys have emerged as promising candidates for cost-effective rare-earth-free permanent magnets due to their high magnetocrystalline anisotropy energy (MAE). Using first-principles, fully relativistic calculations within the coherent potential approximation and PBE exchange-correlation potential, we explore the MAE of tetragonal Fe--Co alloys under uniaxial c… ▽ More Uniaxially strained Fe--Co disordered alloys have emerged as promising candidates for cost-effective rare-earth-free permanent magnets due to their high magnetocrystalline anisotropy energy (MAE). Using first-principles, fully relativistic calculations within the coherent potential approximation and PBE exchange-correlation potential, we explore the MAE of tetragonal Fe--Co alloys under uniaxial compression. Our results reveal a previously uncharted high-MAE region, distinct from known structures and accessible through uniaxial compression. △ Less

Submitted 30 October, 2024; v1 submitted 17 September, 2024; originally announced September 2024.

Comments: 6 pages, 3 figures

Magnetic hardness of hexagonal and orthorhombic Fe$_{3}$C, Co$_{3}$C, (Fe-Co)$_{3}$C, and their alloys with boron, nitrogen, and transition metals: A first-principles study

Authors: Justyn Snarski-Adamski, Mirosław Werwiński, Justyna Rychły-Gruszecka

Abstract: In this study, we considered a large set of materials that are closely related to orthorhombic Fe$_3$C (cementite) with the aim of characterizing trends in their intrinsic magnetic properties and identifying alloys that are optimal for applications. A comprehensive analysis was conducted on the full concentration ranges of hexagonal ($ε$) and orthorhombic ($θ$) phases of (Fe-Co)$_3$C, (Fe-Co)$_3$(… ▽ More In this study, we considered a large set of materials that are closely related to orthorhombic Fe$_3$C (cementite) with the aim of characterizing trends in their intrinsic magnetic properties and identifying alloys that are optimal for applications. A comprehensive analysis was conducted on the full concentration ranges of hexagonal ($ε$) and orthorhombic ($θ$) phases of (Fe-Co)$_3$C, (Fe-Co)$_3$(B-C), (Fe-Co)$_3$(C-N), and their alloys with 3$d$, 4$d$ and 5$d$ transition metals. The calculations were performed using the density functional theory implemented in the full-potential local-orbital code (FPLO). Calculated properties included formation energies, Curie temperatures, magnetic moments, magnetocrystalline anisotropy energies (MAE), and magnetic hardnesses. The considered compositions exhibit a range of magnetic properties, including soft, semi-hard, and hard magnetic. The materials most promising for hard-magnetic applications are orthorhombic Co$_3$C compound, together with selected Co-rich orthorhombic (Fe,Co)$_3$C and hexagonal (Fe,Co)$_3$C alloys. The calculation results do not indicate that substituting with transition metals increases the potential of the alloys for permanent magnet applications. A significant drawback of alloying orthorhombic $θ$-Fe$_3$C (cementite) with transition metals is the notable decline in the Curie temperature. We found that a considerable proportion of the orthorhombic Co$_3$(B-C-N) alloys are magnetically hard, of which boron substitution raises the Curie temperature and improves stability. By mapping the dependence of MAE on the concentration of elements covering both the 3$d$ (from Fe to Co) and 2$p$ (from B, through C, to N) positions, we have demonstrated for the first time the near isoelectronic nature of MAE. The latter observation may be particularly useful in designing compositions of new magnetically hard materials. △ Less

Submitted 29 January, 2025; v1 submitted 11 September, 2024; originally announced September 2024.

Journal ref: APL Materials 13 (2025) 021117

Magnetic anisotropy of L1$_0$ FeNi (001), (010), and (111) ultrathin films: A first-principles study

Authors: Joanna Marciniak, Mirosław Werwiński

Abstract: In previous experiments, thin films of L1$\mathrm{_0}$ FeNi with different surfaces, including (001), (110) and (111), were produced and studied. Each surface defines a different alignment of the crystallographic tetragonal axis with respect to the film's plane, resulting in different magnetic anisotropies. In this study, we use density functional theory calculations to examine three series of L1… ▽ More In previous experiments, thin films of L1$\mathrm{_0}$ FeNi with different surfaces, including (001), (110) and (111), were produced and studied. Each surface defines a different alignment of the crystallographic tetragonal axis with respect to the film's plane, resulting in different magnetic anisotropies. In this study, we use density functional theory calculations to examine three series of L1$\mathrm{_0}$ FeNi films with surfaces (001), (010), and (111), and with thicknesses ranging from 0.5 to 3 nm (from 4 to 16 atomic monolayers). Our results show that films (001) have perpendicular magnetic anisotropy, while (010) favor in-plane magnetization, with a clear preference for the tetragonal axis [001]. We propose calling this type of in-plane anisotropy fixed in plane. A film with surface (111) and a thickness of four atomic monolayers has the magnetization easy axis almost perpendicular to the plane of the film. As the thickness of the (111) film increases, the direction of magnetization rotates towards a tetragonal axis [001], positioned at an angle of about 45$^{o}$ to the plane of the film. Furthermore, the magnetic moment of ultrathin films increases by a maximum of 5%, and the most significant changes in spin and orbital magnetic moments occur at a depth of about three near-surface atomic monolayers. The presented results could be useful for experimental efforts to synthesize ultrathin L1$\mathrm{_0}$ FeNi films with different surfaces. Ultrathin L1$\mathrm{_0}$ FeNi films with varying magnetic anisotropies may find applications in spintronic devices. △ Less

Submitted 21 August, 2024; v1 submitted 4 April, 2024; originally announced April 2024.

Journal ref: Journal of Magnetism and Magnetic Materials 609 (2024) 172455

Searching for magnetically hard monoborides (and finding a few): A first-principles investigation

Authors: Justyn Snarski-Adamski, Mirosław Werwiński

Abstract: New hard magnetic materials with zero or low rare earth content are in demand due to the high prices of the rare earth metals. Among the candidates for such materials, we consider MnB, FeB and their alloys, because previous experiments suggest that FeB has a relatively high magnetic hardness of about 0.83 at room temperature. Using first-principles calculations, we examine the full range of alloys… ▽ More New hard magnetic materials with zero or low rare earth content are in demand due to the high prices of the rare earth metals. Among the candidates for such materials, we consider MnB, FeB and their alloys, because previous experiments suggest that FeB has a relatively high magnetic hardness of about 0.83 at room temperature. Using first-principles calculations, we examine the full range of alloys from CrB, through MnB, FeB, to CoB. Furthrmore, we consider alloys of MnB and FeB with substitutions of 3$d$, 4$d$ and 5$d$ transition metals. For the above ninety compositions, we determine magnetic moment, magnetocrystalline anisotropy energy and magnetic hardness. For (Fe-Co)B alloys, the calculated values of magnetic hardness exceed five, which is an exceptionally high. While these values are inflated by the virtual crystal approximation used, we still expect actual magnetic hardnesses well above unity. Furthermore, we classify considered MnB alloys substituted with transition metals as magnetically soft or semi-hard and FeB alloys with Sc, Ti, V, Zr, Nb, Mo, Hf, Ta or W as magnetically hard (with magnetic hardness exceeding unity). △ Less

Submitted 23 June, 2024; v1 submitted 29 February, 2024; originally announced March 2024.

Comments: 18 pages, 16 figures, 4 tables

Boundary-induced phase in epitaxial iron layers

Authors: Anna L. Ravensburg, Mirosław Werwiński, Justyna Rychły-Gruszecka, Justyn Snarski-Adamski, Anna Elsukova, Per O. Å. Persson, Ján Rusz, Rimantas Brucas, Björgvin Hjövarsson, Peter Svedlindh, Gunnar K. Pálsson, Vassilios Kapaklis

Abstract: We report the discovery of a boundary-induced body-centered tetragonal (bct) iron phase in thin films deposited on MgAl$_{2}$O$_{4}$ ($001$) substrates. We present evidence for this phase using detailed x-ray analysis and ab-initio density functional theory calculations. A lower magnetic moment and a rotation of the easy magnetisation direction are observed, as compared to body-centered cubic (bcc… ▽ More We report the discovery of a boundary-induced body-centered tetragonal (bct) iron phase in thin films deposited on MgAl$_{2}$O$_{4}$ ($001$) substrates. We present evidence for this phase using detailed x-ray analysis and ab-initio density functional theory calculations. A lower magnetic moment and a rotation of the easy magnetisation direction are observed, as compared to body-centered cubic (bcc) iron. Our findings expand the range of known crystal and magnetic phases of iron, providing valuable insights for the development of heterostructure devices using ultra-thin iron layers. △ Less

Submitted 11 January, 2024; originally announced January 2024.

Comments: Main text: 4 pages, 3 figures. Supplemental Material: 9 pages, 11 figures

Journal ref: Phys. Rev. Materials 8, L081401 (2024)

Iron and gold thin films: first-principles study

Authors: Justyna Rychły-Gruszecka, Hubert Głowiński, Justyn Snarski-Adamski, Piotr Kuświk, Mirosław Werwiński

Abstract: Using density functional theory, we carried out systematic calculations for a series of ultrathin iron layers with thicknesses ranging from one atomic monolayer to eleven monolayers (up to about 1.5 nm). We considered three cases: (1) iron layers both on a gold substrate and coated with gold, (2) iron layers on a gold substrate but without coverage, and (3) freestanding iron layers adjacent to a v… ▽ More Using density functional theory, we carried out systematic calculations for a series of ultrathin iron layers with thicknesses ranging from one atomic monolayer to eleven monolayers (up to about 1.5 nm). We considered three cases: (1) iron layers both on a gold substrate and coated with gold, (2) iron layers on a gold substrate but without coverage, and (3) freestanding iron layers adjacent to a vacuum. For our models, we chose initial bcc Fe(001) surfaces and fcc Au(001) substrates. Based on the calculations, we determined the details of the geometry and magnetic properties of the systems. We calculate lattice parameters, magnetic moments, Curie temperatures and magnetocrystalline anisotropy energies. From the thickness dependence, we determined the volume and surface contributions to the magnetic anisotropy constant. The further analysis allowed us to determine the thickness ranges of the occurrence of perpendicular magnetic anisotropy, as well as the effect of thickness and the presence of a substrate and cap layer on the direction of the magnetization easy axis. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: Conference: 2023 IEEE International Magnetic Conference - Short Papers (INTERMAG Short Papers), Sendai, Japan, 2023

Journal ref: 2023 IEEE International Magnetic Conference - Short Papers (INTERMAG Short Papers), Sendai, Japan, 2023, pp. 1-2

First-principles study of the magnetic anisotropy of ultrathin B-, C-, and N-doped FeCo films

Authors: Joanna Marciniak, Mirosław Werwiński, Justyna Rychły-Gruszecka

Abstract: Iron-based layered systems are of great interest because of their ability to tune effective material parameters such as magnetic anisotropy energy (MAE). The influence of the crystallographic structure of Fe, its thickness, and the presence of other layers above and below the Fe layer on magnetic parameters, such as the MAE of the studied system, is an intriguing and important topic from an applic… ▽ More Iron-based layered systems are of great interest because of their ability to tune effective material parameters such as magnetic anisotropy energy (MAE). The influence of the crystallographic structure of Fe, its thickness, and the presence of other layers above and below the Fe layer on magnetic parameters, such as the MAE of the studied system, is an intriguing and important topic from an application point of view. Here, we present a density functional theory (DFT) study of the magnetic anisotropy of nine-monolayer Fe, FeCo, and FeCo films with B, C, and N dopants placed in octahedral interstitial positions. The theoretical study is based on calculations using the full-potential local-orbital code FPLO and the generalized gradient approximation. The chemical disorder in the FeCo layers was modeled using the virtual crystal approximation. The structures of the layers were subjected to optimization of the geometry of the interlayer spacings and the neighborhood of the dopant sites. We determined the local magnetic moments and the excess charge at each layer position. We also identified the influence of dopant atoms on the magnetic properties of FeCo layers, such as magnetization and magnetic anisotropy. △ Less

Submitted 18 October, 2023; originally announced October 2023.

Comments: 7 pages, 5 figures

Journal ref: J. Magn. Magn. Mater 589, 171563 (2024)

Magnetic properties and structural phase transition in ultrathin fcc Fe (111) and bcc Fe (111) films: first-principles study

Authors: Jakub Meixner, Justyna Rychły-Gruszecka, Mirosław Werwiński

Abstract: The aim of this work is to investigate the structural and magnetic characteristics of Fe thin films with a triangular (hexagonal) lattice surfaces (fcc (111) and bcc (111)). The properties of these structures have been calculated using density functional theory (DFT) implemented in the full-potential local-orbital(FPLO) code. The results indicate a structural phase transition from fcc to bcc struc… ▽ More The aim of this work is to investigate the structural and magnetic characteristics of Fe thin films with a triangular (hexagonal) lattice surfaces (fcc (111) and bcc (111)). The properties of these structures have been calculated using density functional theory (DFT) implemented in the full-potential local-orbital(FPLO) code. The results indicate a structural phase transition from fcc to bcc structure when the film thickness exceeds 23 Fe atomic monolayers. The considered fcc films prefer the low-spin ferromagnetic state with an average magnetic moment of about 1.0 $μ_{B}$ per atom. This moment decreases with increasing film thickness until the critical thickness, where, after the structural transition to the bcc phase, it reaches a value close to that of bulk bcc Fe. Moreover, the values of the magnetic anisotropy energy are positive (perpendicular magnetic anisotropy) for the entire thickness range of films with fcc structure (in ferromagnetic low-spin state) and systematically decrease with increasing film thickness. The presented computational results explain the experimentally observed structural transition and may help to select appropriate substrates with suitable lattice parameters for the deposition of ultrathin Fe(111) films. △ Less

Submitted 2 December, 2023; v1 submitted 20 July, 2023; originally announced July 2023.

Comments: submitted to Journal of Magnetism and Magnetic Materials

MSC Class: 81-10

Journal ref: Journal of Magnetism and Magnetic Materials 589 (2024) 171597

Structural and magnetic properties of Fe-Co-C alloys with tetragonal deformation: a first-principle study

Authors: Wojciech Marciniak, Mirosław Werwiński

Abstract: Fe-Co alloys with induced tetragonal strain are promising materials for rare-earth-free permanent magnets. However, as ultrathin-film studies have shown, tetragonal Fe-Co structures tend to a rapid relaxation toward a cubic structure as the thickness of the deposited film increases. One of the main methods of inducing the stable strain in the bulk material is interstitial doping with small atoms,… ▽ More Fe-Co alloys with induced tetragonal strain are promising materials for rare-earth-free permanent magnets. However, as ultrathin-film studies have shown, tetragonal Fe-Co structures tend to a rapid relaxation toward a cubic structure as the thickness of the deposited film increases. One of the main methods of inducing the stable strain in the bulk material is interstitial doping with small atoms, like B, C, or N. In this work, we present a full configuration space analysis in density functional theory approach for (Fe$_{1-x}$Co$_x$)$_{16}$C supercells with a single C impurity in one of the octahedral interstitial positions and for the full range of Co concentrations $x$. We discuss all assumptions and considerations leading to calculated lattice parameters, mixing enthalpies, magnetic moments, and averaged magnetocrystalline anisotropy energies (MAE). We present a comprehensive qualitative analysis of the structural and magnetic properties' dependence on short- and long-range ordering parameters. We analyzed all unique Fe/Co atoms occupancies at all stoichiometric concentrations possible in 2x2x2 supercell based on 2-atom tetragonal representation. We rely on the thermodynamic averaging method and large sample count to obtain accurate MAE values. We reevaluate several chemical disorder approximation methods, including effective medium methods (virtual crystal approximation and coherent potential approximation) and special quasirandom structures method applied to Fe-Co-based alloys. We observe a structural phase transition from the body-centered tetragonal structure above 70% Co concentration and confirm the structural stability of Fe-Co-C alloys in the tetragonal range. We show the presence of a broad MAE maximum of around 50% Co concentration and notably high MAE values for Co content $x$ as low as 25%. In addition, we show a positive correlation between MAE and mixing enthalpy. △ Less

Submitted 7 February, 2025; v1 submitted 11 July, 2023; originally announced July 2023.

Comments: 19 pages, 12 figures, 2 tables

Journal ref: Physical Review B 108.21 (2023): 214433

L1$_0$ FePt thin films with tilted and in-plane magnetic anisotropy: first-principles study

Authors: Joanna Marciniak, Mirosław Werwiński

Abstract: Ultrathin L1$_0$ films with different $c$-axis orientations relative to the film plane are promising candidates for data storage materials. In this work, within the framework of density functional theory, we calculated the magnetic properties of ultrathin L1$_0$ (111) and (010) films with thicknesses ranging from 4 to 16 atomic monolayers (from about 0.8 to 3.5~nm). The highest average magnetic mo… ▽ More Ultrathin L1$_0$ films with different $c$-axis orientations relative to the film plane are promising candidates for data storage materials. In this work, within the framework of density functional theory, we calculated the magnetic properties of ultrathin L1$_0$ (111) and (010) films with thicknesses ranging from 4 to 16 atomic monolayers (from about 0.8 to 3.5~nm). The highest average magnetic moments are observed for the thinnest films considered, and with increasing film thickness, the values converge towards the magnetic moment for bulk. The observed increase comes mainly from enhanced moments in the two atomic monolayers closest to the surface of the films. The easy axis of magnetization of (111) films prefers an alignment close to the tetragonal axis, an example of tilted magnetic anisotropy. The 6-monolayer (111) film (about 1.3~nm thick) inclines the easy axis of magnetization of about 45° to the film plane, which can find use in applications. The (010) films show an in-plane easy magnetization axis in a unique L1$_0$ tetragonal direction. This is an unusual type of in-plane anisotropy, as the particular direction preference is very strong. The computational results encourage further experimental studies of L1$_0$ systems with tilted and in-plane fixed magnetic anisotropy. △ Less

Submitted 22 November, 2023; v1 submitted 28 March, 2023; originally announced March 2023.

Comments: 12 pages, 12 figures

Journal ref: Phys. Rev. B 108, 214406 (2023)

Simulations of magnetic Bragg scattering in transmission electron microscopy

Authors: Justyn Snarski-Adamski, Alexander Edström, Paul Zeiger, José Ángel Castellanos-Reyes, Keenan Lyon, Mirosław Werwiński, Ján Rusz

Abstract: We have simulated the magnetic Bragg scattering in transmission electron microscopy in two antiferromagnetic compounds, NiO and LaMnAsO. This weak magnetic phenomenon was experimentally observed in NiO by Loudon. We have computationally reproduced Loudon's experimental data, and for comparison we have performed calculations for the LaMnAsO compound as a more challenging case, containing lower conc… ▽ More We have simulated the magnetic Bragg scattering in transmission electron microscopy in two antiferromagnetic compounds, NiO and LaMnAsO. This weak magnetic phenomenon was experimentally observed in NiO by Loudon. We have computationally reproduced Loudon's experimental data, and for comparison we have performed calculations for the LaMnAsO compound as a more challenging case, containing lower concentration of magnetic elements and strongly scattering heavier non-magnetic elements. We have also described thickness and voltage dependence of the intensity of the antiferromagnetic Bragg spot for both compounds. We have considered lattice vibrations within two computational approaches, one assuming a static lattice with Debye-Waller smeared potentials, and another explicitly considering the atomic vibrations within the quantum excitations of phonons model (thermal diffuse scattering). The structural analysis shows that the antiferromagnetic Bragg spot appears in between (111) and (000) reflections for NiO, while for LaMnAsO the antiferromagnetic Bragg spot appears at the position of the (010) reflection in the diffraction pattern, which corresponds to a forbidden reflection of the crystal structure. Calculations predict that the intensity of the magnetic Bragg spot in NiO is significantly stronger than thermal diffuse scattering at room temperature. For LaMnAsO, the magnetic Bragg spot is weaker than the room-temperature thermal diffuse scattering, but its detection can be facilitated at reduced temperatures. △ Less

Submitted 20 January, 2023; v1 submitted 10 October, 2022; originally announced October 2022.

Journal ref: Ultramicroscopy 247, 113698 (2023)

DFT calculation of intrinsic properties of magnetically hard phase L1$\mathrm{_0}$ FePt

Authors: Joanna Marciniak, Wojciech Marciniak, Mirosław Werwiński

Abstract: Due to its strong magnetocrystalline anisotropy, FePt L1$\mathrm{_0}$ phase is considered as a promising magnetic recording media material. Although the magnetic properties of this phase have already been analyzed many times using density functional theory (DFT), we decided to study it again, emphasizing on full potential methods, including spin-polarized relativistic Korringa-Kohn-Rostoker (SPR-K… ▽ More Due to its strong magnetocrystalline anisotropy, FePt L1$\mathrm{_0}$ phase is considered as a promising magnetic recording media material. Although the magnetic properties of this phase have already been analyzed many times using density functional theory (DFT), we decided to study it again, emphasizing on full potential methods, including spin-polarized relativistic Korringa-Kohn-Rostoker (SPR-KKR) and full-potential local-orbital (FPLO) scheme. In addition to the determination of exact values of the magnetocrystalline anisotropy constants K$\mathrm{_1}$ and K$\mathrm{_2}$, the magnetic moments (m), the Curie temperature, and the magnetostriction coefficient, we focused on the investigation of the magnetocrystalline anisotropy energy (MAE) dependence on the magnetic moment values using the fully relativistic fixed spin moment (FSM) method with various exchange-correlation potentials. We present nearly identical MAE(m) curves near the equilibrium point, along with different equilibrium values of MAE and magnetic moments. For a magnetic moment reduced by about 10%, we determined a theoretical MAE maximum in the ground state (0 K) equal to about 20.3 MJ m$\mathrm{^{-3}}$ and independent of the choice of the exchange-correlation potential form. These calculations allow us to understand the discrepancies between the previous MAE results for different exchange-correlation potentials. △ Less

Submitted 11 April, 2022; originally announced April 2022.

Comments: 7 pages, 5 figures, submitted to JMMM

Effect of transition metal doping on magnetic hardness of CeFe$_{12}$-based compounds

Authors: Justyn Snarski-Adamski, Mirosław Werwiński

Abstract: In this work, compositions of CeFe11X and CeFe10X2 with all 3d, 4d, and 5d transition metal substitutions are considered. Since many previous studies have focused on the CeFe11Ti compound, this particular compound became the starting point of our considerations and we gave it special attention. We first determined the optimal symmetry of the simplest CeFe11Ti structure model. We then observed that… ▽ More In this work, compositions of CeFe11X and CeFe10X2 with all 3d, 4d, and 5d transition metal substitutions are considered. Since many previous studies have focused on the CeFe11Ti compound, this particular compound became the starting point of our considerations and we gave it special attention. We first determined the optimal symmetry of the simplest CeFe11Ti structure model. We then observed that the calculated magnetocrystalline anisotropy energy (MAE) correlates with the magnetic moment, which in turn strongly depends on the choice of the exchange-correlation potential. MAE, magnetic moments, and magnetic hardness were determined for all compositions considered. Moreover, the calculated dependence of the MAE on the spin magnetic moment allowed us to predict the upper limits of the MAE. We also showed that it does not depend on the choice of the exchange-correlation potential form. The economically justifiable compositions with the highest magnetic hardness values are CeFe11W, CeFe10W2, CeFe11Mn, CeFe10Mn2, CeFe11Mo, CeFe10Mo2, and CeFe10Nb2. However, calculations suggest that, like CeFe12, these compounds are not chemically stable and could require additional treatments to stabilize the composition. Further alloying of the selected compositions with elements embedded in interstitial positions confirms the positive effect of such dopants on hard magnetic properties. Subsequent calculations performed for comparison for selected isostructural La-based compounds lead to similar MAE results as for Ce-based compounds, suggesting a secondary effect of 4f electrons. Calculations were performed using the full-potential local-orbital electronic structure code FPLO18, whose unique fully relativistic implementation of the fixed spin moment method allowed us to calculate the MAE dependence of the magnetic moment. △ Less

Submitted 23 March, 2022; v1 submitted 28 July, 2021; originally announced July 2021.

Comments: 10 pages, 6 figures

Magnetic properties of 3d, 4d, and 5d transition-metal atomic monolayers in Fe/TM/Fe sandwiches: Systematic first-principles study

Authors: Justyn Snarski-Adamski, Justyna Rychły, Mirosław Werwiński

Abstract: Previous studies have accurately determined the effect of transition metal point defects on the properties of bcc iron. The magnetic properties of transition metal monolayers on the iron surfaces have been studied equally intensively. In this work, we investigated the magnetic properties of the 3d, 4d, and 5d transition-metal (TM) atomic monolayers in Fe/TM/Fe sandwiches using the full-potential l… ▽ More Previous studies have accurately determined the effect of transition metal point defects on the properties of bcc iron. The magnetic properties of transition metal monolayers on the iron surfaces have been studied equally intensively. In this work, we investigated the magnetic properties of the 3d, 4d, and 5d transition-metal (TM) atomic monolayers in Fe/TM/Fe sandwiches using the full-potential local-orbital (FPLO) scheme of density functional theory. We prepared models of Fe/TM/Fe structures using the supercell method. We selected the total thickness of our system so that the Fe atomic layers furthest from the TM layer exhibit bulk iron-bcc properties. Along the direction perpendicular to the TM layer, we observe oscillations of spin and charge density. For Pt and W we obtained the largest values of perpendicular magnetocrystalline anisotropy and for Lu and Ir the largest values of in-plane magnetocrystalline anisotropy. All TM layers, except Co and Ni, reduce the total spin magnetic moment in the generated models, which is in good agreement with the Slater-Pauling curve. Density of states calculations showed that for Ag, Pd, Ir, and Au monolayers, a distinct van Hove singularity associated with TM/Fe interface can be observed at the Fermi level. △ Less

Submitted 8 July, 2021; originally announced July 2021.

Comments: 6 pages, 5 figures

Journal ref: J. Mag. Mag. Mat. 546, 168828. (2022)

Monte Carlo calculations of Curie temperatures of Y$_{1-x}$Gd$_x$(Fe$_{1-y}$Co$_y$)$_2$ pseudobinary system

Authors: Bartosz Wasilewski, Mirosław Werwiński

Abstract: The close-packed AB$_2$ structures called Laves phases constitute the largest group of intermetallic compounds. In this paper we computationally investigated the pseudo-binary Laves phase system Y$_{1-x}$Gd$_x$(Fe$_{1-y}$Co$_y$)$_2$ spanning between the YFe$_2$, YCo$_2$, GdFe$_2$, and GdCo$_2$ vertices. While the vast majority of the Y$_{1-x}$Gd$_x$(Fe$_{1-y}$Co$_y$)$_2$ phase diagram is the ferri… ▽ More The close-packed AB$_2$ structures called Laves phases constitute the largest group of intermetallic compounds. In this paper we computationally investigated the pseudo-binary Laves phase system Y$_{1-x}$Gd$_x$(Fe$_{1-y}$Co$_y$)$_2$ spanning between the YFe$_2$, YCo$_2$, GdFe$_2$, and GdCo$_2$ vertices. While the vast majority of the Y$_{1-x}$Gd$_x$(Fe$_{1-y}$Co$_y$)$_2$ phase diagram is the ferrimagnetic phase, YCo$_2$ along with a narrow range of concentrations around it is the paramagnetic phase. We presented results obtained by Monte Carlo simulations of the Heisenberg model with parameters derived from first-principles calculations. For calculations, we used the Uppsala atomistic spin dynamics (UppASD) code together with the spin-polarized relativistic Korringa-Kohn-Rostoker (SPR-KKR) code. From first principles we calculated the magnetic moments and exchange integrals for the considered pseudo-binary system, together with spin-polarized densities of states for boundary compositions. Furthermore, we showed how the compensation point with the effective zero total moment depends on the concentration in the considered ferrimagnetic phases. However, the main result of our study was the determination of the Curie temperature dependence for the system Y$_{1-x}$Gd$_x$(Fe$_{1-y}$Co$_y$)$_2$. Except for the paramagnetic region around YCo$_2$, the predicted temperatures were in good qualitative and quantitative agreement with experimental results, which confirmed the ability of the method to predict magnetic transition temperatures for systems containing up to three different magnetic elements (Fe, Co, and Gd) simultaneously. For the Y(Fe$_{1-y}$Co$_y$)$_2$ and Gd(Fe$_{1-y}$Co$_y$)$_2$ systems our calculations matched the experimentally-confirmed Slater-Pauling-like behavior of T$_C$ dependence on the Co concentration. △ Less

Submitted 28 May, 2021; originally announced May 2021.

Comments: 6 pages, 6 figures, conference: Physics of Magnetism 2021, Poznań, Poland

Journal ref: Journal of Magnetism and Magnetic Materials 543 (2022) 168614

Electronic structure of YbFe$_4$Al$_8$ antiferromagnet: A combined X-ray photoelectron spectroscopy and first-principles study

Authors: Wojciech Marciniak, Grażyna Chełkowska, Anna Bajorek, Andrzej Kowalczyk, Andrzej Szajek, Mirosław Werwiński

Abstract: Depending on their chemical composition, Yb compounds often exhibit different valence states. Here we investigate the valence state of YbFe$_4$Al$_8$ using X-ray photoelectron spectroscopy (XPS) and first-principles calculaions. The XPS valence band of YbFe$_4$Al$_8$ consists of two contributions coming from divalent (Yb$^{2+}$) and trivalent (Yb$^{3+}$) configurations. The determined value of the… ▽ More Depending on their chemical composition, Yb compounds often exhibit different valence states. Here we investigate the valence state of YbFe$_4$Al$_8$ using X-ray photoelectron spectroscopy (XPS) and first-principles calculaions. The XPS valence band of YbFe$_4$Al$_8$ consists of two contributions coming from divalent (Yb$^{2+}$) and trivalent (Yb$^{3+}$) configurations. The determined value of the valence at room temperature is 2.81. Divalent and trivalent contributions are also observed for core-level Yb 4$d$ XPS spectra. We study several collinear antiferromagnetic models of YbFe$_4$Al$_8$ from the first-principles and for comparison we also consider LuFe$_4$Al$_8$ with a fully filled 4$f$ shell. We predict that only Fe sublattices of YbFe$_4$Al$_8$ carry significant magnetic moments and that the most stable magnetic configuration is AFM-C with antiparallel columns of magnetic moments. We also present a Mullliken electronic population analysis describing charge transfer both within and between atoms. In addition, we also study the effect of intra-atomic Coulomb U repulsion term applied for 4$f$ orbitals on Yb valence and Fe magnetic moments. △ Less

Submitted 11 May, 2021; originally announced May 2021.

Comments: 13 pages, 9 figures

Journal ref: Journal of Alloys and Compounds 910 (2022) 164478

Ostwald ripening in an oxide-on-metal system

Authors: Natalia Michalak, Tomasz Ossowski, Zygmunt Miłosz, Mauricio J. Prieto, Ying Wang, Mirosław Werwiński, Visnja Babacic, Francesca Genuzio, Luca Vattuone, Adam Kiejna, Thomas Schmidt, Mikołaj Lewandowski

Abstract: Ostwald ripening is a well-known physicochemical phenomenon in which smaller particles, characterized by high surface energy, dissolve and feed the bigger ones that are thermodynamically more stable. The effect is commonly observed in solid and liquid solutions, as well as in systems consisting of supported metal clusters or liquid droplets. Here, we provide the first evidence for the occurrence o… ▽ More Ostwald ripening is a well-known physicochemical phenomenon in which smaller particles, characterized by high surface energy, dissolve and feed the bigger ones that are thermodynamically more stable. The effect is commonly observed in solid and liquid solutions, as well as in systems consisting of supported metal clusters or liquid droplets. Here, we provide the first evidence for the occurrence of Ostwald ripening in an oxide-on-metal system which, in our case, consists of ultrathin iron monoxide (FeO) islands grown on Ru(0001) single-crystal support. The results reveal that the thermally-driven sintering of islands allows altering their fine structural characteristics, including size, perimeter length, defect density and stoichiometry, which are crucial, e.g., from the point of view of heterogeneous catalysis. △ Less

Submitted 19 January, 2022; v1 submitted 3 May, 2021; originally announced May 2021.

Structural transformation and magnetic properties of (Fe$_{0.7}$Co$_{0.3}$)$_2$B alloys doped with 5$d$ elements: A combined first-principles and experimental study

Authors: A. Musiał, W. Marciniak, Z. Śniadecki, M. Werwiński, P. Kuświk, B. Idzikowski, M. Kołodziej, A. Grabias, M. Kopcewicz, J. Marcin, J. Kováč

Abstract: (Fe,Co)$_2$B-based compounds with specified 5$d$ substitutions are considered as promising materials for permanent magnets without rare-earth elements. We conducted a combined first-principles and experimental study focused on (Fe$_{0.7}$Co$_{0.3}$)$_2$B alloys doped with W and Re. First, we used full-potential local-orbital scheme to systematically investigate (Fe,Co)$_2$B alloys with 3$d$, 4$d$,… ▽ More (Fe,Co)$_2$B-based compounds with specified 5$d$ substitutions are considered as promising materials for permanent magnets without rare-earth elements. We conducted a combined first-principles and experimental study focused on (Fe$_{0.7}$Co$_{0.3}$)$_2$B alloys doped with W and Re. First, we used full-potential local-orbital scheme to systematically investigate (Fe,Co)$_2$B alloys with 3$d$, 4$d$, and 5$d$ substitutions. Computational analyses showed a significant increase in magnetocrystalline anisotropy only for the Re doped sample. Simultaneously, the structural and magnetic properties of the (Fe$_{0.7-x}$Co$_{0.3-x}$M$_{2x}$)$_2$B ($M$ = W, Re; $x$ = 0, 0.025) alloys were investigated experimentally. The desired (Fe,Co)$_2$B tetragonal phase was synthesized by heat treatment of amorphous precursors. We observed that isothermal annealing increases the coercive field of all samples. However, the obtained values, without further optimization, are well below the threshold for permanent magnet applications. Nevertheless, annealing of substituted samples at 750$^o$C significantly improves saturation magnetization values. Furthermore, Mössbauer spectroscopy revealed a reduction of the hyperfine field due to the presence of Co atoms in the (Fe,Co)$_2$B phase, where additional defect positions are formed by Re and W. Radio-frequency Mössbauer studies showed that (Fe$_{0.7}$Co$_{0.3}$)$_2$B and the W-substituted sample began to crystallize when exposed to an radio frequency field of 12 Oe, indicating that the amorphous phase is stabilized by Re substitution. Improvement of thermal stability of (Fe$_{0.675}$Co$_{0.275}$Re$_{0.05}$)$_2$B alloy is consistent with the results of differential scanning calorimetry and thermomagnetic measurements. △ Less

Submitted 27 June, 2022; v1 submitted 28 April, 2021; originally announced April 2021.

Journal ref: Journal of Alloys and Compounds 921 (2022) 166047

Influence of Pr substitution on physical properties of Ce$_{1-x}$Pr$_x$CoGe$_3$ system: A combined experimental and first-principles study

Authors: P. Skokowski, K. Synoradzki, M. Werwiński, A. Bajorek, G. Chełkowska, T. Toliński

Abstract: We present the results of our investigations of physical properties for the novel Ce$_{1-x}$Pr$_x$CoGe$_3$ system performed with a number of experimental methods: magnetic susceptibility, specific heat, electrical resistivity, magnetoresistance, and thermoelectric power. Moreover, the electronic structure was studied by means of photoelectron spectroscopy measurements and first-principles calculat… ▽ More We present the results of our investigations of physical properties for the novel Ce$_{1-x}$Pr$_x$CoGe$_3$ system performed with a number of experimental methods: magnetic susceptibility, specific heat, electrical resistivity, magnetoresistance, and thermoelectric power. Moreover, the electronic structure was studied by means of photoelectron spectroscopy measurements and first-principles calculations. All investigated compositions of the Ce$_{1-x}$Pr$_x$CoGe$_3$ series crystallize in the tetragonal BaNiSn$_3$-type structure. The lattice parameters and unit cell volumes decrease with increasing Pr concentration. On the basis of the measurements taken, a preliminary magnetic phase diagram was created. A continuous suppression of the long-range magnetic ordering was observed with increase of Pr concentration. The critical Pr concentration for magnetic moment ordering was determined from linear extrapolation of the ordering temperature $versus$ $x$ to the lowest temperatures ($T = 0$ K) and is equal to about 0.66. Based on the first-principles calculations we show how the substitution of Pr for Ce affects the electronic structure and magnetic properties of the considered alloys. Within a single model we take into account the magnetic ordering, fully-relativistic effects, and Hubbard U repulsion on Ce and Pr. The impact of Hubbard U on the results of calculations is also discussed. We present the valence-band analysis, Mulliken electronic population analysis, and calculated electronic specific heat coefficients. For CeCoGe$_3$ it is found that the $++--$ configuration of magnetic moments on Ce is slightly more stable than the $+-+-$ one, and also that the calculated value of total magnetic moment on Ce (including spin and orbital parts) is in good agreement with the measurements. △ Less

Submitted 27 November, 2020; v1 submitted 29 March, 2020; originally announced March 2020.

Comments: 21 pages, 26 figures

Journal ref: Phys. Rev. B 102, 245127 (2020)

Electronic specific heat coefficient and magnetic properties of Y(Fe$_{1-x}$Co$_x$)$_2$ Laves phases: a combined experimental and first-principles study

Authors: Bartosz Wasilewski, Zbigniew Śniadecki, Mirosław Werwiński, Natalia Pierunek, Ján Rusz, Olle Eriksson

Abstract: We investigated experimentally and computationally the concentration dependence of electronic specific heat coefficient $γ$ in Y(Fe$_{1-x}$Co$_x$)$_2$ pseudobinary Laves phase system. The experimentally observed maximum in $γ$($x$) around the magnetic phase transition was interpreted within the local density approximation (LDA) combined with the virtual crystal approximation (VCA). To explain the… ▽ More We investigated experimentally and computationally the concentration dependence of electronic specific heat coefficient $γ$ in Y(Fe$_{1-x}$Co$_x$)$_2$ pseudobinary Laves phase system. The experimentally observed maximum in $γ$($x$) around the magnetic phase transition was interpreted within the local density approximation (LDA) combined with the virtual crystal approximation (VCA). To explain the formation of the observed maximum, we analyzed theoretically the dependence of the magnetic energy, magnetic moments, densities of states, and Fermi surfaces on the Co concentration. Furthermore, we carried out the calculations of density of states at the Fermi level as a function of fixed spin moment. The calculated Co concentration at which $γ$ takes the maximum value ($x_{\mathrm{max-LDA-VCA}}=0.91$) stays in good agreement with the measured value ($x_{\mathrm{max-expt}} = 0.925$). We conclude that the observed maximum in $γ(x)$ results from the presence of the sharp DOS peak in the vicinity of the Fermi level. △ Less

Submitted 8 October, 2019; v1 submitted 7 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. B 100, 134436 (2019)

Study on CePtIn4 grown in a platelet-like morphology

Authors: Debarchan Das, Marek Daszkiewicz, Daniel Gnida, Alicja Hackemer, Mirosław Werwiński, Andrzej Szajek, Dariusz Kaczorowski

Abstract: We present the results of our comprehensive structural investigation performed on single crystals of CePtIn4 grown from In flux in a platelet-like morphology. They were found to crystalize in an orthorhombic structure having space group Cmcm (no. 63) with the lattice parameters a = 4.52175 (15) Å, b = 16.7777 (5) Å, and c = 7.3903 (2) Å. The unit cell volume of such crystals is slightly larger tha… ▽ More We present the results of our comprehensive structural investigation performed on single crystals of CePtIn4 grown from In flux in a platelet-like morphology. They were found to crystalize in an orthorhombic structure having space group Cmcm (no. 63) with the lattice parameters a = 4.52175 (15) Å, b = 16.7777 (5) Å, and c = 7.3903 (2) Å. The unit cell volume of such crystals is slightly larger than that of previously reported needle-shaped single crystals of CePtIn4. This feature seems to influence the low-temperature physical properties of the compound, such as enhanced ordering temperature (TN = 2.3 K versus 1.65 K, observed before) along with a sharp drop in the electrical resistivity at TN (that was absent for the needle-like CePtIn4). In addition to the experimental data, we present the results of our ab-initio calculations of the electronic structure of CePtIn4 with the platelet-like morphology. △ Less

Submitted 12 September, 2019; v1 submitted 15 May, 2019; originally announced May 2019.

Comments: 20 pages, 6 figures, 4 tables

Magnetocrystalline anisotropy of Fe5PB2 and its alloys with Co and 5d elements: a combined first-principles and experimental study

Authors: Mirosław Werwiński, Alexander Edström, Ján Rusz, Daniel Hedlund, Klas Gunnarsson, Peter Svedlindh, Johan Cedervall, Martin Sahlberg

Abstract: The Fe$_5$PB$_2$ compound offers tunable magnetic properties via the possibility of various combinations of substitutions on the Fe and P-sites. Here, we present a combined computational and experimental study of the magnetic properties of (Fe$_{1-x}$Co$_{x}$)$_5$PB$_2$. Computationally, we are able to explore the full concentration range, while the real samples were only obtained for 0 <= x <= 0.… ▽ More The Fe$_5$PB$_2$ compound offers tunable magnetic properties via the possibility of various combinations of substitutions on the Fe and P-sites. Here, we present a combined computational and experimental study of the magnetic properties of (Fe$_{1-x}$Co$_{x}$)$_5$PB$_2$. Computationally, we are able to explore the full concentration range, while the real samples were only obtained for 0 <= x <= 0.7. The calculated magnetic moments, Curie temperatures, and magnetocrystalline anisotropy energies (MAEs) are found to decrease with increasing Co concentration. Co substitution allows for tuning the Curie temperature in a wide range of values, from about six hundred to zero kelvins. As the MAE depends on the electronic structure in the vicinity of Fermi energy, the geometry of the Fermi surface of Fe$_5$PB$_2$ and the k-resolved contributions to the MAE are discussed. Low temperature measurements of an effective anisotropy constant for a series of (Fe$_{1-x}$Co$_{x}$)$_5$PB$_2$ samples determined the highest value of 0.94 MJ m$^{-3}$ for the terminal Fe$_5$PB$_2$ composition, which then decreases with increasing Co concentration, thus confirming the computational result that Co alloying of Fe$_5$PB$_2$ is not a good strategy to increase the MAE of the system. However, the relativistic version of the fixed spin moment method reveals that a reduction in the magnetic moment of Fe$_5$PB$_2$, by about 25%, produces a fourfold increase of the MAE. Furthermore, calculations for (Fe$_{0.95}$X$_{0.05}$)$_5$PB$_2$ (X = 5$d$ element) indicate that 5% doping of Fe$_5$PB$_2$ with W or Re should double the MAE. These are results of high interest for, e.g., permanent magnet applications, where a large MAE is crucial. △ Less

Submitted 30 November, 2018; v1 submitted 27 July, 2018; originally announced July 2018.

Journal ref: Phys. Rev. B 98, 214431 (2018)

Ab initio study of magnetocrystalline anisotropy, magnetostriction, and Fermi surface of L10 FeNi (tetrataenite)

Authors: Mirosław Werwiński, Wojciech Marciniak

Abstract: The ordered L1$_0$ FeNi phase (tetrataenite) is recently considered as a promising candidate for the rare-earth free permanent magnets applications. In this work we calculate several characteristics of the L1$_0$ FeNi, where most of the results come form the fully relativistic full potential FPLO method with the generalized gradient approximation (GGA). A special attention deserves the summary of… ▽ More The ordered L1$_0$ FeNi phase (tetrataenite) is recently considered as a promising candidate for the rare-earth free permanent magnets applications. In this work we calculate several characteristics of the L1$_0$ FeNi, where most of the results come form the fully relativistic full potential FPLO method with the generalized gradient approximation (GGA). A special attention deserves the summary of the magnetocrystalline anisotropy energies (MAE's), the full potential calculations of the anisotropy constant $K_3$, and the combined analysis of the Fermi surface and three-dimensional $\mathbf{k}$-resolved MAE. Other calculated parameters presented in this article are the magnetic moments $m_{s}$ and $m_{l}$, magnetostrictive coefficient $λ_{001}$, bulk modulus B$_0$, and lattice parameters. The MAE's summary shows rather big discrepancies between the experimental MAE's from literature and also between the calculated MAE's. △ Less

Submitted 17 August, 2017; v1 submitted 9 May, 2017; originally announced May 2017.

Journal ref: Mirosaw Werwiski and Wojciech Marciniak 2017 J. Phys. D: Appl. Phys. 50 495008

Magnetic properties of Fe$_5$SiB$_2$ and its alloys with P, S, and Co

Authors: Mirosław Werwiński, Sofia Kontos, Klas Gunnarsson, Peter Svedlindh, Johan Cedervall, Viktor Höglin, Martin Sahlberg, Alexander Edström, Olle Eriksson, Ján Rusz

Abstract: Fe$_5$SiB$_2$ has been synthesized and magnetic measurements have been carried out, revealing that M$_{\text{sat}}$ = 0.92 MA/m at T = 300 K. The M vs T curve shows a broad peak around T = 160 K. The anisotropy constant, K$_1$, estimated at T = 300 K, is 0.25 MJ/m$^3$. Theoretical analysis of Fe$_5$SiB$_2$ system has been carried out and extended to the full range of Fe$_5$Si$_{1-x}$P$_x$B$_2$, Fe… ▽ More Fe$_5$SiB$_2$ has been synthesized and magnetic measurements have been carried out, revealing that M$_{\text{sat}}$ = 0.92 MA/m at T = 300 K. The M vs T curve shows a broad peak around T = 160 K. The anisotropy constant, K$_1$, estimated at T = 300 K, is 0.25 MJ/m$^3$. Theoretical analysis of Fe$_5$SiB$_2$ system has been carried out and extended to the full range of Fe$_5$Si$_{1-x}$P$_x$B$_2$, Fe$_5$P$_{1-x}$S$_x$B$_2$, and (Fe$_{1-x}$Co$_x$)$_5$SiB$_2$ compositions. The electronic band structures have been calculated using the Full-Potential Local-Orbital Minimum-Basis Scheme (FPLO-14). The calculated total magnetic moments are 9.20, 9.15, 9.59 and 2.42$μ_B$ per formula units of Fe$_5$SiB$_2$, Fe$_5$PB$_2$, Fe$_5$SB$_2$, and Co$_5$SiB$_2$, respectively. In agreement with experiment, magnetocrystalline anisotropy energies (MAE's) calculated for T = 0 K changes from a negative (easy-plane) anisotropy -0.28 MJ/m$^3$ for Fe$_5$SiB$_2$ to the positive (easy-axis) anisotropy 0.35 MJ/m$^3$ for Fe$_5$PB$_2$. Further increase of the number of p-electrons in Fe$_5$P$_{1-x}$S$_x$B$_2$ leads to an increase of MAE up to 0.77 MJ/m$^3$ for the hypothetical Fe$_5$P$_{0.4}$S$_{0.6}$B$_2$ composition. Volume variation and fixed spin moment calculations (FSM) performed for Fe$_5$SiB$_2$ show an inverse relation between MAE and magnetic moment in the region down to about 15\% reduction of the spin moment. The alloying of Fe$_5$SiB$_2$ with Co is proposed as a practical realization of magnetic moment reduction, which ought to increase MAE. MAE calculated in virtual crystal approximation (VCA) for a full range of (Fe$_{1-x}$Co$_x$)$_5$SiB$_2$ compositions reaches the maximum value of 1.16 MJ/m$^3$ at Co concentration x = 0.3, with the magnetic moment 7.75$μ_B$ per formula unit. Thus, (Fe$_{0.7}$Co$_{0.3}$)$_5$SiB$_2$ is suggested as a candidate for a rare-earth free permanent magnet. △ Less

Submitted 1 March, 2016; originally announced March 2016.

Comments: 11 pages, 14 figures

Journal ref: Phys. Rev. B 93, 174412 (2016)

From soft to hard magnetic Fe-Co-B by spontaneous strain: A combined first principle and thin film study

Authors: Ludwig Reichel, Ludwig Schultz, Darius Pohl, Steffen Oswald, Sebastian Fähler, Miroslaw Werwinski, Alexander Edström, Erna K. Delczeg-Czirjak, Jan Rusz

Abstract: In order to convert the well-known Fe-Co-B alloy from a soft to a hard magnet, we propose tetragonal strain by interstitial boron. Density functional theory reveals that when B atoms occupy octahedral interstitial sites, the bcc Fe-Co lattice is strained spontaneously. Such highly distorted Fe-Co is predicted to reach a strong magnetocrystalline anisotropy which may compete with shape anisotropy.… ▽ More In order to convert the well-known Fe-Co-B alloy from a soft to a hard magnet, we propose tetragonal strain by interstitial boron. Density functional theory reveals that when B atoms occupy octahedral interstitial sites, the bcc Fe-Co lattice is strained spontaneously. Such highly distorted Fe-Co is predicted to reach a strong magnetocrystalline anisotropy which may compete with shape anisotropy. Probing this theoretical suggestion experimentally, epitaxial films are examined. A spontaneous strain up to 5 % lattice distortion is obtained for B contents up to 4 at%, which leads to uniaxial anisotropy constants exceeding 0.5 MJ/m^3. However, a further addition of B results in a partial amorphization, which degrades both anisotropy and magnetization. △ Less

Submitted 14 September, 2015; originally announced September 2015.

Comments: 29 pages, 8 figures, 4 tables, supplementary PDF

Journal ref: Journal of Physics: Condensed Matter 27, 476002 (2015)

Magnetic properties of (Fe$_{1-x}$Co$_x$)$_2$B alloys and the effect of doping by 5$d$ elements

Authors: A. Edström, M. Werwiński, Diana Iuşan, J. Rusz, O. Eriksson, K. P. Skokov, I. A. Radulov, S. Ener, M. D. Kuz'min, J. Hong, M. Fries, D. Yu. Karpenkov, O. Gutfleisch, P. Toson, J. Fidler

Abstract: We have explored, computationally and experimentally, the magnetic properties of \fecob{} alloys. Calculations provide a good agreement with experiment in terms of the saturation magnetization and the magnetocrystalline anisotropy energy with some difficulty in describing Co$_2$B, for which it is found that both full potential effects and electron correlations treated within dynamical mean field t… ▽ More We have explored, computationally and experimentally, the magnetic properties of \fecob{} alloys. Calculations provide a good agreement with experiment in terms of the saturation magnetization and the magnetocrystalline anisotropy energy with some difficulty in describing Co$_2$B, for which it is found that both full potential effects and electron correlations treated within dynamical mean field theory are of importance for a correct description. The material exhibits a uniaxial magnetic anisotropy for a range of cobalt concentrations between $x=0.1$ and $x=0.5$. A simple model for the temperature dependence of magnetic anisotropy suggests that the complicated non-monotonous temperature behaviour is mainly due to variations in the band structure as the exchange splitting is reduced by temperature. Using density functional theory based calculations we have explored the effect of substitutional doping the transition metal sublattice by the whole range of 5$d$ transition metals and found that doping by Re or W elements should significantly enhance the magnetocrystalline anisotropy energy. Experimentally, W doping did not succeed in enhancing the magnetic anisotropy due to formation of other phases. On the other hand, doping by Ir and Re was successful and resulted in magnetic anisotropies that are in agreement with theoretical predictions. In particular, doping by 2.5~at.\% of Re on the Fe/Co site shows a magnetocrystalline anisotropy energy which is increased by 50\% compared to its parent (Fe$_{0.7}$Co$_{0.3}$)$_2$B compound, making this system interesting, for example, in the context of permanent magnet replacement materials or in other areas where a large magnetic anisotropy is of importance. △ Less

Submitted 1 September, 2015; v1 submitted 20 February, 2015; originally announced February 2015.

Comments: 15 pages 17 figures

Journal ref: Phys. Rev. B 92,174413 (2015)

Exceptional Ising Magnetic Behavior of Itinerant Spin-polarized Carriers in URu2Si2

Authors: Miroslaw Werwinski, Jan Rusz, John A. Mydosh, Peter M. Oppeneer

Abstract: We show on the basis of electronic structure calculations that the uranium 5$f$ magnetic moment in URu$_2$Si$_2$ exhibits a unique Ising behavior, which surprisingly, arises from itinerant electronic states. The origin of the unusual Ising behavior is analyzed as due to the peculiar near-Fermi edge nested electronic structure of URu$_2$Si$_2$ involving its strong spin-orbit interaction. The Ising… ▽ More We show on the basis of electronic structure calculations that the uranium 5$f$ magnetic moment in URu$_2$Si$_2$ exhibits a unique Ising behavior, which surprisingly, arises from itinerant electronic states. The origin of the unusual Ising behavior is analyzed as due to the peculiar near-Fermi edge nested electronic structure of URu$_2$Si$_2$ involving its strong spin-orbit interaction. The Ising anisotropy has pertinent implications for theories applicable to explaining the Hidden Order phase in URu$_2$Si$_2$. △ Less

Submitted 7 May, 2014; originally announced May 2014.

Comments: 5 pages, 3 figures; to be published

Magnetic properties and electronic structures of intermediate valence systems CeRhSi2 and Ce2Rh3Si5

Authors: D. Kaczorowski, A. P. Pikul, U. Burkhardt, M. Schmidt, A. Slebarski, A. Szajek, M. Werwinski, Yu. Grin

Abstract: The crystal structures and the physical (magnetic, electrical transport and thermodynamic) properties of the ternary compounds CeRhSi2 and Ce2Rh3Si5 (orthorhombic CeNiSi2- and U2Co3Si5-type structures, respectively) were studied in wide ranges of temperature and magnetic field strength. The results revealed that both materials are valence fluctuating systems, in line with previous literature repor… ▽ More The crystal structures and the physical (magnetic, electrical transport and thermodynamic) properties of the ternary compounds CeRhSi2 and Ce2Rh3Si5 (orthorhombic CeNiSi2- and U2Co3Si5-type structures, respectively) were studied in wide ranges of temperature and magnetic field strength. The results revealed that both materials are valence fluctuating systems, in line with previous literature reports. Direct evidence for valence fluctuations was obtained by means of Ce LIII-edge x-ray absorption spectroscopy and Ce 3d core-level x-ray photoelectron spectroscopy. The experimental data were confronted with the results of ab initio calculations of the electronic band structures in both compounds. △ Less

Submitted 27 April, 2010; originally announced April 2010.

Comments: 22 pages, 9 figures, to appear in J. Phys.: Condens. Matter

Journal ref: J. Phys.: Condens. Matter 22, 215601 (2010)

Giant crystal-electric-field effect and complex magnetic behavior in single-crystalline CeRh3Si2

Authors: A. P. Pikul, D. Kaczorowski, Z. Gajek, J. Stepien--Damm, A. Slebarski, M. Werwinski, A. Szajek

Abstract: Single-crystalline CeRh3Si2 was investigated by means of x-ray diffraction, magnetic susceptibility, magnetization, electrical resistivity, and specific heat measurements carried out in wide temperature and magnetic field ranges. Moreover, the electronic structure of the compound was studied at room temperature by cerium core-level x-ray photoemission spectroscopy (XPS). The physical properties we… ▽ More Single-crystalline CeRh3Si2 was investigated by means of x-ray diffraction, magnetic susceptibility, magnetization, electrical resistivity, and specific heat measurements carried out in wide temperature and magnetic field ranges. Moreover, the electronic structure of the compound was studied at room temperature by cerium core-level x-ray photoemission spectroscopy (XPS). The physical properties were analyzed in terms of crystalline electric field and compared with results of ab-initio band structure calculations performed within the density functional theory approach. The compound was found to crystallize in the orthorhombic unit cell of the ErRh3Si2 type (space group Imma -- No.74, Pearson symbol: oI24) with the lattice parameters: a = 7.1330(14) A, b = 9.7340(19) A, and c = 5.6040(11) A. Analysis of the magnetic and XPS data revealed the presence of well localized magnetic moments of trivalent cerium ions. All physical properties were found to be highly anisotropic over the whole temperature range studied, and influenced by exceptionally strong crystalline electric field with the overall splitting of the 4f1 ground multiplet exceeding 5700 K. Antiferromagnetic order of the cerium magnetic moments at TN = 4.70(1)K and their subsequent spin rearrangement at Tt = 4.48(1) K manifest themselves as distinct anomalies in the temperature characteristics of all investigated physical properties and exhibit complex evolution in an external magnetic field. A tentative magnetic B-T phase diagram, constructed for B parallel to the b-axis being the easy magnetization direction, shows very complex magnetic behavior of CeRh3Si2, similar to that recently reported for an isostructural compound CeIr3Si2. The electronic band structure calculations corroborated the antiferromagnetic ordering of the cerium magnetic moments and well reproduced the experimental XPS valence band spectrum. △ Less

Submitted 22 April, 2010; originally announced April 2010.

Comments: 32 pages, 12 figures, to appear in Physical Review B

Journal ref: Phys. Rev. B 81, 174408 (2010)