Showing 1–50 of 466 results for author: Ward, L

Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, A. Abada , et al. (1439 additional authors not shown)

Abstract: In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;… ▽ More In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase. FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible. FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes. This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 627 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0004

Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I… ▽ More Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region. The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 357 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0003

Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.… ▽ More Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 290 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-PHYS-2025-0002

Advances and Challenges in Foundation Agents: From Brain-Inspired Intelligence to Evolutionary, Collaborative, and Safe Systems

Authors: Bang Liu, Xinfeng Li, Jiayi Zhang, Jinlin Wang, Tanjin He, Sirui Hong, Hongzhang Liu, Shaokun Zhang, Kaitao Song, Kunlun Zhu, Yuheng Cheng, Suyuchen Wang, Xiaoqiang Wang, Yuyu Luo, Haibo Jin, Peiyan Zhang, Ollie Liu, Jiaqi Chen, Huan Zhang, Zhaoyang Yu, Haochen Shi, Boyan Li, Dekun Wu, Fengwei Teng, Xiaojun Jia , et al. (22 additional authors not shown)

Abstract: The advent of large language models (LLMs) has catalyzed a transformative shift in artificial intelligence, paving the way for advanced intelligent agents capable of sophisticated reasoning, robust perception, and versatile action across diverse domains. As these agents increasingly drive AI research and practical applications, their design, evaluation, and continuous improvement present intricate… ▽ More The advent of large language models (LLMs) has catalyzed a transformative shift in artificial intelligence, paving the way for advanced intelligent agents capable of sophisticated reasoning, robust perception, and versatile action across diverse domains. As these agents increasingly drive AI research and practical applications, their design, evaluation, and continuous improvement present intricate, multifaceted challenges. This survey provides a comprehensive overview, framing intelligent agents within a modular, brain-inspired architecture that integrates principles from cognitive science, neuroscience, and computational research. We structure our exploration into four interconnected parts. First, we delve into the modular foundation of intelligent agents, systematically mapping their cognitive, perceptual, and operational modules onto analogous human brain functionalities, and elucidating core components such as memory, world modeling, reward processing, and emotion-like systems. Second, we discuss self-enhancement and adaptive evolution mechanisms, exploring how agents autonomously refine their capabilities, adapt to dynamic environments, and achieve continual learning through automated optimization paradigms, including emerging AutoML and LLM-driven optimization strategies. Third, we examine collaborative and evolutionary multi-agent systems, investigating the collective intelligence emerging from agent interactions, cooperation, and societal structures, highlighting parallels to human social dynamics. Finally, we address the critical imperative of building safe, secure, and beneficial AI systems, emphasizing intrinsic and extrinsic security threats, ethical alignment, robustness, and practical mitigation strategies necessary for trustworthy real-world deployment. △ Less

Submitted 31 March, 2025; originally announced April 2025.

MOFA: Discovering Materials for Carbon Capture with a GenAI- and Simulation-Based Workflow

Authors: Xiaoli Yan, Nathaniel Hudson, Hyun Park, Daniel Grzenda, J. Gregory Pauloski, Marcus Schwarting, Haochen Pan, Hassan Harb, Samuel Foreman, Chris Knight, Tom Gibbs, Kyle Chard, Santanu Chaudhuri, Emad Tajkhorshid, Ian Foster, Mohamad Moosavi, Logan Ward, E. A. Huerta

Abstract: We present MOFA, an open-source generative AI (GenAI) plus simulation workflow for high-throughput generation of metal-organic frameworks (MOFs) on large-scale high-performance computing (HPC) systems. MOFA addresses key challenges in integrating GPU-accelerated computing for GPU-intensive GenAI tasks, including distributed training and inference, alongside CPU- and GPU-optimized tasks for screeni… ▽ More We present MOFA, an open-source generative AI (GenAI) plus simulation workflow for high-throughput generation of metal-organic frameworks (MOFs) on large-scale high-performance computing (HPC) systems. MOFA addresses key challenges in integrating GPU-accelerated computing for GPU-intensive GenAI tasks, including distributed training and inference, alongside CPU- and GPU-optimized tasks for screening and filtering AI-generated MOFs using molecular dynamics, density functional theory, and Monte Carlo simulations. These heterogeneous tasks are unified within an online learning framework that optimizes the utilization of available CPU and GPU resources across HPC systems. Performance metrics from a 450-node (14,400 AMD Zen 3 CPUs + 1800 NVIDIA A100 GPUs) supercomputer run demonstrate that MOFA achieves high-throughput generation of novel MOF structures, with CO$_2$ adsorption capacities ranking among the top 10 in the hypothetical MOF (hMOF) dataset. Furthermore, the production of high-quality MOFs exhibits a linear relationship with the number of nodes utilized. The modular architecture of MOFA will facilitate its integration into other scientific applications that dynamically combine GenAI with large-scale simulations. △ Less

Submitted 17 January, 2025; originally announced January 2025.

Comments: 13 pages, 10 figures

Dirac-Schwinger Quantization for Emergent Magnetic Monopoles?

Authors: A. Farhan, M. Saccone, B. F. L. Ward

Abstract: In Refs.[1-4] Dirac and Schwinger showed the existence of a magnetic monopole required a charge quantization condition which we write following Dirac as $\frac{eg}{4π\hbar}=\frac{n}{2},\; n=0,\pm 1,\; \pm 2, \ldots$. Here, $g$ is the magnetic monopole charge and $e$ is the electric charge of the positron. Recently, in Refs. [5,6], it has been shown experimentally that frustrated spin-ice systems e… ▽ More In Refs.[1-4] Dirac and Schwinger showed the existence of a magnetic monopole required a charge quantization condition which we write following Dirac as $\frac{eg}{4π\hbar}=\frac{n}{2},\; n=0,\pm 1,\; \pm 2, \ldots$. Here, $g$ is the magnetic monopole charge and $e$ is the electric charge of the positron. Recently, in Refs. [5,6], it has been shown experimentally that frustrated spin-ice systems exhibit 'emergent' magnetic monopoles. We show that, within the experimental errors, the respective magnetic charges obey the Dirac-Schwinger quantization condition. Possible implications are discussed. △ Less

Submitted 28 April, 2025; v1 submitted 23 December, 2024; originally announced January 2025.

Comments: 4 pages, no figures; typo corrected, extended discussion, orcid links added, new department name added

Report number: BU-HEPP-24-07

Journal ref: Phys. Lett. B 865 (2025) 139496

Microbial Mat Metagenomes from Waikite Valley, Aotearoa New Zealand

Authors: Beatrice Tauer, Elizabeth Trembath-Reichert, L. M. Ward

Abstract: The rise of complex multicellular ecosystems Neoproterozoic time was preceded by a microbial Proterozoic biosphere, where productivity may have been largely restricted to microbial mats made up of bacteria including oxygenic photosynthetic Cyanobacteria, anoxygenic phototrophs, and heterotrophs. In modern environments, analogous microbial mats can be found in restricted environments such as carbon… ▽ More The rise of complex multicellular ecosystems Neoproterozoic time was preceded by a microbial Proterozoic biosphere, where productivity may have been largely restricted to microbial mats made up of bacteria including oxygenic photosynthetic Cyanobacteria, anoxygenic phototrophs, and heterotrophs. In modern environments, analogous microbial mats can be found in restricted environments such as carbonate tidal flats and terrestrial hot springs. Here, we report metagenomic sequence data from an analog in the hot springs of Waikite Valley, Aotearoa New Zealand, where carbon-rich, slightly-alkaline geothermal waters support diverse phototrophic microbial mats. The Waikite Valley hot spring in the Taupo Volcanic Zone of Aotearoa New Zealand was sampled in duplicate at 8 points along a temperature gradient transect of the outflow, from ~62 C (near the source) to ~37 C (~100 meters downstream). ~686 Gb of shotgun metagenomic sequence data was generated by Illumina Novaseq. Each sample was assembled using SPAdes, followed by binning of metagenome-assembled genomes (MAGs) by MetaBAT. These data are useful for the genomic analysis of novel phototrophic bacteria, as well as for ecological comparisons between thermophilic communities with varying temperatures but otherwise similar conditions. △ Less

Submitted 2 December, 2024; originally announced December 2024.

Comments: 55 pages, 1 table, 3 data sets

Workflows Community Summit 2024: Future Trends and Challenges in Scientific Workflows

Authors: Rafael Ferreira da Silva, Deborah Bard, Kyle Chard, Shaun de Witt, Ian T. Foster, Tom Gibbs, Carole Goble, William Godoy, Johan Gustafsson, Utz-Uwe Haus, Stephen Hudson, Shantenu Jha, Laila Los, Drew Paine, Frédéric Suter, Logan Ward, Sean Wilkinson, Marcos Amaris, Yadu Babuji, Jonathan Bader, Riccardo Balin, Daniel Balouek, Sarah Beecroft, Khalid Belhajjame, Rajat Bhattarai , et al. (86 additional authors not shown)

Abstract: The Workflows Community Summit gathered 111 participants from 18 countries to discuss emerging trends and challenges in scientific workflows, focusing on six key areas: time-sensitive workflows, AI-HPC convergence, multi-facility workflows, heterogeneous HPC environments, user experience, and FAIR computational workflows. The integration of AI and exascale computing has revolutionized scientific w… ▽ More The Workflows Community Summit gathered 111 participants from 18 countries to discuss emerging trends and challenges in scientific workflows, focusing on six key areas: time-sensitive workflows, AI-HPC convergence, multi-facility workflows, heterogeneous HPC environments, user experience, and FAIR computational workflows. The integration of AI and exascale computing has revolutionized scientific workflows, enabling higher-fidelity models and complex, time-sensitive processes, while introducing challenges in managing heterogeneous environments and multi-facility data dependencies. The rise of large language models is driving computational demands to zettaflop scales, necessitating modular, adaptable systems and cloud-service models to optimize resource utilization and ensure reproducibility. Multi-facility workflows present challenges in data movement, curation, and overcoming institutional silos, while diverse hardware architectures require integrating workflow considerations into early system design and developing standardized resource management tools. The summit emphasized improving user experience in workflow systems and ensuring FAIR workflows to enhance collaboration and accelerate scientific discovery. Key recommendations include developing standardized metrics for time-sensitive workflows, creating frameworks for cloud-HPC integration, implementing distributed-by-design workflow modeling, establishing multi-facility authentication protocols, and accelerating AI integration in HPC workflow management. The summit also called for comprehensive workflow benchmarks, workflow-specific UX principles, and a FAIR workflow maturity model, highlighting the need for continued collaboration in addressing the complex challenges posed by the convergence of AI, HPC, and multi-facility research environments. △ Less

Submitted 18 October, 2024; originally announced October 2024.

Report number: ORNL/TM-2024/3573

Amplitude-Based IR-Improvement in Precision LHC$/$FCC Physics

Authors: B. F. L. Ward, S. Jadach, W. Placzek, M. Skrzypek, Z. Was, S. A. Yost

Abstract: We present recent results based on the IR-improvement of unintegrable singularities in the infrared regime via amplitude-based resummation in $QED \times QCD \subset SU(2)_L \times U_1 \times SU(3)_c$. In the context of precision LHC$/$FCC physics, we focus on specific examples, such as the removal of QED contamination in PDFs evolved from data at ${Q_0}^2 \sim 2\; {\text{GeV}}^2$ and used in the… ▽ More We present recent results based on the IR-improvement of unintegrable singularities in the infrared regime via amplitude-based resummation in $QED \times QCD \subset SU(2)_L \times U_1 \times SU(3)_c$. In the context of precision LHC$/$FCC physics, we focus on specific examples, such as the removal of QED contamination in PDFs evolved from data at ${Q_0}^2 \sim 2\; {\text{GeV}}^2$ and used in the evaluating precision observables in $pp \rightarrow Z + X \rightarrow \ell\bar{\ell} + X'$, in which we discuss new results and new issues. △ Less

Submitted 10 October, 2024; originally announced October 2024.

Comments: 6 pages, 4 figures, presented by BFLW at ICHEP 2024, Prague, CZ, July 18, 2024. arXiv admin note: substantial text overlap with arXiv:2410.06226

Report number: BU-HEPP-24-03

Journal ref: PoS 476 (ICHEP2024) 554

Phenomenology of matching exponentiated photonic radiation to a QED-corrected parton shower in KKMChh

Authors: Scott A. Yost, B. F. L. Ward, Zbigniew Wąs

Abstract: KKMChh is a precision Monte Carlo program for photonic and electroweak radiative corrections to hadron scattering, implementing the amplitude-level exponentiation originally developed for electron-positron scattering at the quark level, modeling initial and final state QED radiation as well as initial-final interference to all orders in a soft-photon approximation, adding hard photon corrections t… ▽ More KKMChh is a precision Monte Carlo program for photonic and electroweak radiative corrections to hadron scattering, implementing the amplitude-level exponentiation originally developed for electron-positron scattering at the quark level, modeling initial and final state QED radiation as well as initial-final interference to all orders in a soft-photon approximation, adding hard photon corrections through second order next-to-leading logarithm. A previous ICHEP talk introduced a matching procedure NISR (negative initial-state radiation) to match the exponentiated photon radiation from the quarks to a QED-corrected parton shower. Here, we describe its effect on forward-backward asymmetry calculations of interest for a precise determination of the electroweak mixing angle. △ Less

Submitted 9 October, 2024; originally announced October 2024.

Comments: Presented by S. Yost at the 42nd International Conference on High Energy Physics (ICHEP2024), 18-24 July 2024, Prague, Czech Republic. 3 pages, 1 figure

Report number: BU-HEPP-24-05

Journal ref: PoS 476 (ICHEP2024) 389

Collinearly Enhanced YFS MC Approach to Precision High Energy Collider Physics

Authors: B. F. L. Ward, S. Jadach, Z. Was

Abstract: We improve the YFS IR resummation theory so that it includes all of the attendant collinear contributions which exponentiate. The attendant new resummed contributions are shown to agree with known results from the collinear factorization approach. We argue that they improve the corresponding precision tag for a given level of exactness in the respective YFS hard radiation residuals as the latter a… ▽ More We improve the YFS IR resummation theory so that it includes all of the attendant collinear contributions which exponentiate. The attendant new resummed contributions are shown to agree with known results from the collinear factorization approach. We argue that they improve the corresponding precision tag for a given level of exactness in the respective YFS hard radiation residuals as the latter are realized in the YFS MC approach to precision high-energy collider physics. △ Less

Submitted 8 October, 2024; originally announced October 2024.

Comments: 3 pages, no figures, poster presented by BFLW at ICHEP 2024, Prague, CZ, on 7/19/2024

Report number: BU-HEPP-24-04

Outlook for the Theoretical Precision of the Luminosity at Future Lepton Colliders

Authors: B. F. L. Ward, S. Jadach, W. Placzek, M. Skrzypek, S. A. Yost

Abstract: The LEP precision physics requirements on the theoretical precision tag for the respective luminosity were $0.054 \%$ ($0.061\%$) at $M_Z$, where the former (latter) LEP result has (does not have) the pairs correction. For the contemplated FCC-ee, ILC, and CEPC Higgs/EW factories, one needs improvement at $M_Z$ to at least $0.01\%$ for the theoretical precision tag. We discuss the paths one may ta… ▽ More The LEP precision physics requirements on the theoretical precision tag for the respective luminosity were $0.054 \%$ ($0.061\%$) at $M_Z$, where the former (latter) LEP result has (does not have) the pairs correction. For the contemplated FCC-ee, ILC, and CEPC Higgs/EW factories, one needs improvement at $M_Z$ to at least $0.01\%$ for the theoretical precision tag. We discuss the paths one may take to even exceed this latter goal and present an update on the current expectations for both $M_Z$ and proposed higher energy scenarios. △ Less

Submitted 8 October, 2024; originally announced October 2024.

Comments: 3 pages, 3 figures, poster presented by BFLW at ICHEP 2024, Prague, CZ, on 7/18/2024

Report number: BU-HEPP-24-02

KKMCee: Multi-photon MC for lepton and quark pair production at lepton colliders

Authors: Scott A. Yost, Stanisław Jadach, B. F. L. Ward, Zbigniew Wąs, Andrzej Siódmok

Abstract: We present an overview of the Monte Carlo event generator KKMCee for lepton and quark pair production in the high energy electron-positron annihilation process. We note that it is still the most sophisticated event generator for such processes. Its entire source code has been rewritten in C++. We have verified that the new version, KKMCee 5.00, reproduces the benchmarks of the older code in FORTRA… ▽ More We present an overview of the Monte Carlo event generator KKMCee for lepton and quark pair production in the high energy electron-positron annihilation process. We note that it is still the most sophisticated event generator for such processes. Its entire source code has been rewritten in C++. We have verified that the new version, KKMCee 5.00, reproduces the benchmarks of the older code in FORTRAN 77. We discuss a number of improvements in the MC algorithm and its interfaces. △ Less

Submitted 9 October, 2024; originally announced October 2024.

Comments: Presented by S. Yost at the 42nd International Conference on High Energy Physics (ICHEP2024), 18-24 July 2024, Prague, Czech Republic. 6 pages, 3 figures

Report number: BU-HEPP-24-06

Journal ref: PoS 476 (ICHEP2024) 374

YFS Exponentiation -- Gate to Precision Accelerator Physics Experiments

Authors: B. F. L. Ward

Abstract: We present the history and current status of the YFS Monte Carlo approach to precision theory for accelerator physics experiments. Key contributions of Prof. Stanislaw Jadach are highlighted We present the history and current status of the YFS Monte Carlo approach to precision theory for accelerator physics experiments. Key contributions of Prof. Stanislaw Jadach are highlighted △ Less

Submitted 8 October, 2024; originally announced October 2024.

Comments: 12 pages, 5 figures, presented at the 30$^{th}$ Cracow Epiphany Conference on Precision Physics at High Energy Colliders, Cracow, PL, 8 -12 January, 2024

Report number: BU-HEPP-24-01

Journal ref: Acta Phys. Pol. B Proceedings Supplement 17, 5-X1 (2024) 5-A2. Acta Phys. Pol. B Proceedings Supplement 17, 5-X1 (2024) 5-A2. Acta Phys. Pol. B Proceedings Supplement ${\bf 17}$, 5-XI (2024) 5-A2

Employing Artificial Intelligence to Steer Exascale Workflows with Colmena

Authors: Logan Ward, J. Gregory Pauloski, Valerie Hayot-Sasson, Yadu Babuji, Alexander Brace, Ryan Chard, Kyle Chard, Rajeev Thakur, Ian Foster

Abstract: Computational workflows are a common class of application on supercomputers, yet the loosely coupled and heterogeneous nature of workflows often fails to take full advantage of their capabilities. We created Colmena to leverage the massive parallelism of a supercomputer by using Artificial Intelligence (AI) to learn from and adapt a workflow as it executes. Colmena allows scientists to define how… ▽ More Computational workflows are a common class of application on supercomputers, yet the loosely coupled and heterogeneous nature of workflows often fails to take full advantage of their capabilities. We created Colmena to leverage the massive parallelism of a supercomputer by using Artificial Intelligence (AI) to learn from and adapt a workflow as it executes. Colmena allows scientists to define how their application should respond to events (e.g., task completion) as a series of cooperative agents. In this paper, we describe the design of Colmena, the challenges we overcame while deploying applications on exascale systems, and the science workflows we have enhanced through interweaving AI. The scaling challenges we discuss include developing steering strategies that maximize node utilization, introducing data fabrics that reduce communication overhead of data-intensive tasks, and implementing workflow tasks that cache costly operations between invocations. These innovations coupled with a variety of application patterns accessible through our agent-based steering model have enabled science advances in chemistry, biophysics, and materials science using different types of AI. Our vision is that Colmena will spur creative solutions that harness AI across many domains of scientific computing. △ Less

Submitted 26 August, 2024; originally announced August 2024.

Swift-BAT GUANO follow-up of gravitational-wave triggers in the third LIGO-Virgo-KAGRA observing run

Authors: Gayathri Raman, Samuele Ronchini, James Delaunay, Aaron Tohuvavohu, Jamie A. Kennea, Tyler Parsotan, Elena Ambrosi, Maria Grazia Bernardini, Sergio Campana, Giancarlo Cusumano, Antonino D'Ai, Paolo D'Avanzo, Valerio D'Elia, Massimiliano De Pasquale, Simone Dichiara, Phil Evans, Dieter Hartmann, Paul Kuin, Andrea Melandri, Paul O'Brien, Julian P. Osborne, Kim Page, David M. Palmer, Boris Sbarufatti, Gianpiero Tagliaferri , et al. (1797 additional authors not shown)

Abstract: We present results from a search for X-ray/gamma-ray counterparts of gravitational-wave (GW) candidates from the third observing run (O3) of the LIGO-Virgo-KAGRA (LVK) network using the Swift Burst Alert Telescope (Swift-BAT). The search includes 636 GW candidates received in low latency, 86 of which have been confirmed by the offline analysis and included in the third cumulative Gravitational-Wav… ▽ More We present results from a search for X-ray/gamma-ray counterparts of gravitational-wave (GW) candidates from the third observing run (O3) of the LIGO-Virgo-KAGRA (LVK) network using the Swift Burst Alert Telescope (Swift-BAT). The search includes 636 GW candidates received in low latency, 86 of which have been confirmed by the offline analysis and included in the third cumulative Gravitational-Wave Transient Catalogs (GWTC-3). Targeted searches were carried out on the entire GW sample using the maximum--likelihood NITRATES pipeline on the BAT data made available via the GUANO infrastructure. We do not detect any significant electromagnetic emission that is temporally and spatially coincident with any of the GW candidates. We report flux upper limits in the 15-350 keV band as a function of sky position for all the catalog candidates. For GW candidates where the Swift-BAT false alarm rate is less than 10$^{-3}$ Hz, we compute the GW--BAT joint false alarm rate. Finally, the derived Swift-BAT upper limits are used to infer constraints on the putative electromagnetic emission associated with binary black hole mergers. △ Less

Submitted 27 March, 2025; v1 submitted 13 July, 2024; originally announced July 2024.

Comments: Update to version accepted for publication in ApJ. 50 pages, 10 figures, 4 tables

Journal ref: ApJ, Volume 980, 2025, 207

Object Proxy Patterns for Accelerating Distributed Applications

Authors: J. Gregory Pauloski, Valerie Hayot-Sasson, Logan Ward, Alexander Brace, André Bauer, Kyle Chard, Ian Foster

Abstract: Workflow and serverless frameworks have empowered new approaches to distributed application design by abstracting compute resources. However, their typically limited or one-size-fits-all support for advanced data flow patterns leaves optimization to the application programmer -- optimization that becomes more difficult as data become larger. The transparent object proxy, which provides wide-area r… ▽ More Workflow and serverless frameworks have empowered new approaches to distributed application design by abstracting compute resources. However, their typically limited or one-size-fits-all support for advanced data flow patterns leaves optimization to the application programmer -- optimization that becomes more difficult as data become larger. The transparent object proxy, which provides wide-area references that can resolve to data regardless of location, has been demonstrated as an effective low-level building block in such situations. Here we propose three high-level proxy-based programming patterns -- distributed futures, streaming, and ownership -- that make the power of the proxy pattern usable for more complex and dynamic distributed program structures. We motivate these patterns via careful review of application requirements and describe implementations of each pattern. We evaluate our implementations through a suite of benchmarks and by applying them in three substantial scientific applications, in which we demonstrate substantial improvements in runtime, throughput, and memory usage. △ Less

Submitted 2 December, 2024; v1 submitted 1 July, 2024; originally announced July 2024.

Comments: Accepted for publication in Transactions on Parallel and Distributed Systems

Ultralight vector dark matter search using data from the KAGRA O3GK run

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, A. G. Abac, R. Abbott, H. Abe, I. Abouelfettouh, F. Acernese, K. Ackley, C. Adamcewicz, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, O. D. Aguiar, I. Aguilar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi , et al. (1778 additional authors not shown)

Abstract: Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we prese… ▽ More Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we present the result of a search for $U(1)_{B-L}$ gauge boson DM using the KAGRA data from auxiliary length channels during the first joint observation run together with GEO600. By applying our search pipeline, which takes into account the stochastic nature of ultralight DM, upper bounds on the coupling strength between the $U(1)_{B-L}$ gauge boson and ordinary matter are obtained for a range of DM masses. While our constraints are less stringent than those derived from previous experiments, this study demonstrates the applicability of our method to the lower-mass vector DM search, which is made difficult in this measurement by the short observation time compared to the auto-correlation time scale of DM. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 20 pages, 5 figures

Report number: LIGO-P2300250

Trillion Parameter AI Serving Infrastructure for Scientific Discovery: A Survey and Vision

Authors: Nathaniel Hudson, J. Gregory Pauloski, Matt Baughman, Alok Kamatar, Mansi Sakarvadia, Logan Ward, Ryan Chard, André Bauer, Maksim Levental, Wenyi Wang, Will Engler, Owen Price Skelly, Ben Blaiszik, Rick Stevens, Kyle Chard, Ian Foster

Abstract: Deep learning methods are transforming research, enabling new techniques, and ultimately leading to new discoveries. As the demand for more capable AI models continues to grow, we are now entering an era of Trillion Parameter Models (TPM), or models with more than a trillion parameters -- such as Huawei's PanGu-$Σ$. We describe a vision for the ecosystem of TPM users and providers that caters to t… ▽ More Deep learning methods are transforming research, enabling new techniques, and ultimately leading to new discoveries. As the demand for more capable AI models continues to grow, we are now entering an era of Trillion Parameter Models (TPM), or models with more than a trillion parameters -- such as Huawei's PanGu-$Σ$. We describe a vision for the ecosystem of TPM users and providers that caters to the specific needs of the scientific community. We then outline the significant technical challenges and open problems in system design for serving TPMs to enable scientific research and discovery. Specifically, we describe the requirements of a comprehensive software stack and interfaces to support the diverse and flexible requirements of researchers. △ Less

Submitted 5 February, 2024; originally announced February 2024.

Comments: 10 pages, 3 figures, accepted for publication in the proceedings of the 10th IEEE/ACM International Conference on Big Data Computing, Applications and Technologies (BDCAT2023)

Quantum enhanced balanced heterodyne readout for differential interferometry

Authors: Daniel W. Gould, Vaishali B. Adya, Sheon S. Y. Chua, Jonas Junker, Dennis Wilken, Terry G. McRae, Bram J. J. Slagmolen, Min Jet Yap, Robert L. Ward, Michèle Heurs, David E. McClelland

Abstract: Conventional heterodyne readout schemes are now under reconsideration due to the realization of techniques to evade its inherent 3 dB signal-to-noise penalty. The application of high-frequency, spectrally entangled, two-mode squeezed states can further improve the readout sensitivity of audio-band signals. In this paper, we experimentally demonstrate quantum-enhanced heterodyne readout of two spat… ▽ More Conventional heterodyne readout schemes are now under reconsideration due to the realization of techniques to evade its inherent 3 dB signal-to-noise penalty. The application of high-frequency, spectrally entangled, two-mode squeezed states can further improve the readout sensitivity of audio-band signals. In this paper, we experimentally demonstrate quantum-enhanced heterodyne readout of two spatially distinct interferometers with direct optical signal combination, circumventing the 3 dB heterodyne signal-to-noise penalty. Applying a high-frequency, spectrally entangled, two-mode squeezed state, we show further signal-to-noise improvement of an injected audio band signal of 3.5 dB. This technique is applicable for quantum-limited high-precision experiments, with application to searches for quantum gravity, gravitational wave detection and wavelength-multiplexed quantum communication. △ Less

Submitted 28 October, 2024; v1 submitted 10 January, 2024; originally announced January 2024.

Comments: 7 pages, 3 figures, 2 table

A case study of multi-modal, multi-institutional data management for the combinatorial materials science community

Authors: Sarah I. Allec, Eric S. Muckley, Nathan S. Johnson, Christopher K. H. Borg, Dylan J. Kirsch, Joshua Martin, Rohit Pant, Ichiro Takeuchi, Andrew S. Lee, James E. Saal, Logan Ward, Apurva Mehta

Abstract: Although the convergence of high-performance computing, automation, and machine learning has significantly altered the materials design timeline, transformative advances in functional materials and acceleration of their design will require addressing the deficiencies that currently exist in materials informatics, particularly a lack of standardized experimental data management. The challenges asso… ▽ More Although the convergence of high-performance computing, automation, and machine learning has significantly altered the materials design timeline, transformative advances in functional materials and acceleration of their design will require addressing the deficiencies that currently exist in materials informatics, particularly a lack of standardized experimental data management. The challenges associated with experimental data management are especially true for combinatorial materials science, where advancements in automation of experimental workflows have produced datasets that are often too large and too complex for human reasoning. The data management challenge is further compounded by the multi-modal and multi-institutional nature of these datasets, as they tend to be distributed across multiple institutions and can vary substantially in format, size, and content. To adequately map a materials design space from such datasets, an ideal materials data infrastructure would contain data and metadata describing i) synthesis and processing conditions, ii) characterization results, and iii) property and performance measurements. Here, we present a case study for the low-barrier development of such a dashboard that enables standardized organization, analysis, and visualization of a large data lake consisting of combinatorial datasets of synthesis and processing conditions, X-ray diffraction patterns, and materials property measurements generated at several different institutions. While this dashboard was developed specifically for data-driven thermoelectric materials discovery, we envision the adaptation of this prototype to other materials applications, and, more ambitiously, future integration into an all-encompassing materials data management infrastructure. △ Less

Submitted 6 February, 2024; v1 submitted 16 November, 2023; originally announced November 2023.

Accelerating Electronic Stopping Power Predictions by 10 Million Times with a Combination of Time-Dependent Density Functional Theory and Machine Learning

Authors: Logan Ward, Ben Blaiszik, Cheng-Wei Lee, Troy Martin, Ian Foster, André Schleife

Abstract: Knowing the rate at which particle radiation releases energy in a material, the stopping power, is key to designing nuclear reactors, medical treatments, semiconductor and quantum materials, and many other technologies. While the nuclear contribution to stopping power, i.e., elastic scattering between atoms, is well understood in the literature, the route for gathering data on the electronic contr… ▽ More Knowing the rate at which particle radiation releases energy in a material, the stopping power, is key to designing nuclear reactors, medical treatments, semiconductor and quantum materials, and many other technologies. While the nuclear contribution to stopping power, i.e., elastic scattering between atoms, is well understood in the literature, the route for gathering data on the electronic contribution has for decades remained costly and reliant on many simplifying assumptions, including that materials are isotropic. We establish a method that combines time-dependent density functional theory (TDDFT) and machine learning to reduce the time to assess new materials to mere hours on a supercomputer and provides valuable data on how atomic details influence electronic stopping. Our approach uses TDDFT to compute the electronic stopping contributions to stopping power from first principles in several directions and then machine learning to interpolate to other directions at a cost of 10 million times fewer core-hours. We demonstrate the combined approach in a study of proton irradiation in aluminum and employ it to predict how the depth of maximum energy deposition, the "Bragg Peak," varies depending on incident angle -- a quantity otherwise inaccessible to modelers. The lack of any experimental information requirement makes our method applicable to most materials, and its speed makes it a prime candidate for enabling quantum-to-continuum models of radiation damage. The prospect of reusing valuable TDDFT data for training the model make our approach appealing for applications in the age of materials data science. △ Less

Submitted 25 June, 2024; v1 submitted 1 November, 2023; originally announced November 2023.

New Results from IR-Improved Amplitude-Based Resummation in Quantum Field Theory

Authors: B. F. L. Ward, S. Jadach, W. Placzek, M. Skrzypek, Z. A. Was, S. A. Yost

Abstract: There is a continuing effort to support and prepare the precision physics programs for the present and planned future colliders such as HL-LHC, FCC, CLIC, CEPC, and CPPC. We discuss new results from IR-improved amplitude-based resummation in quantum field theory relevant to such support and preparation with some emphasis on the interplay between soft and collinear resummation algebras. There is a continuing effort to support and prepare the precision physics programs for the present and planned future colliders such as HL-LHC, FCC, CLIC, CEPC, and CPPC. We discuss new results from IR-improved amplitude-based resummation in quantum field theory relevant to such support and preparation with some emphasis on the interplay between soft and collinear resummation algebras. △ Less

Submitted 15 October, 2023; originally announced October 2023.

Comments: 9 pages, 5 figures, presented by BFLW at RADCOR2023, Crieff, Scotland, UK

Report number: BU-HEPP-23-02

Reproducibility in Computational Materials Science: Lessons from 'A General-Purpose Machine Learning Framework for Predicting Properties of Inorganic Materials'

Authors: Daniel Persaud, Logan Ward, Jason Hattrick-Simpers

Abstract: The integration of machine learning techniques in materials discovery has become prominent in materials science research and has been accompanied by an increasing trend towards open-source data and tools to propel the field. Despite the increasing usefulness and capabilities of these tools, developers neglecting to follow reproducible practices creates a significant barrier for researchers looking… ▽ More The integration of machine learning techniques in materials discovery has become prominent in materials science research and has been accompanied by an increasing trend towards open-source data and tools to propel the field. Despite the increasing usefulness and capabilities of these tools, developers neglecting to follow reproducible practices creates a significant barrier for researchers looking to use or build upon their work. In this study, we investigate the challenges encountered while attempting to reproduce a section of the results presented in "A general-purpose machine learning framework for predicting properties of inorganic materials." Our analysis identifies four major categories of challenges: (1) reporting computational dependencies, (2) recording and sharing version logs, (3) sequential code organization, and (4) clarifying code references within the manuscript. The result is a proposed set of tangible action items for those aiming to make code accessible to, and useful for the community. △ Less

Submitted 10 October, 2023; originally announced October 2023.

Comments: Main text: 15 pages, 1 table, 1 figure

DeepSpeed4Science Initiative: Enabling Large-Scale Scientific Discovery through Sophisticated AI System Technologies

Authors: Shuaiwen Leon Song, Bonnie Kruft, Minjia Zhang, Conglong Li, Shiyang Chen, Chengming Zhang, Masahiro Tanaka, Xiaoxia Wu, Jeff Rasley, Ammar Ahmad Awan, Connor Holmes, Martin Cai, Adam Ghanem, Zhongzhu Zhou, Yuxiong He, Pete Luferenko, Divya Kumar, Jonathan Weyn, Ruixiong Zhang, Sylwester Klocek, Volodymyr Vragov, Mohammed AlQuraishi, Gustaf Ahdritz, Christina Floristean, Cristina Negri , et al. (67 additional authors not shown)

Abstract: In the upcoming decade, deep learning may revolutionize the natural sciences, enhancing our capacity to model and predict natural occurrences. This could herald a new era of scientific exploration, bringing significant advancements across sectors from drug development to renewable energy. To answer this call, we present DeepSpeed4Science initiative (deepspeed4science.ai) which aims to build unique… ▽ More In the upcoming decade, deep learning may revolutionize the natural sciences, enhancing our capacity to model and predict natural occurrences. This could herald a new era of scientific exploration, bringing significant advancements across sectors from drug development to renewable energy. To answer this call, we present DeepSpeed4Science initiative (deepspeed4science.ai) which aims to build unique capabilities through AI system technology innovations to help domain experts to unlock today's biggest science mysteries. By leveraging DeepSpeed's current technology pillars (training, inference and compression) as base technology enablers, DeepSpeed4Science will create a new set of AI system technologies tailored for accelerating scientific discoveries by addressing their unique complexity beyond the common technical approaches used for accelerating generic large language models (LLMs). In this paper, we showcase the early progress we made with DeepSpeed4Science in addressing two of the critical system challenges in structural biology research. △ Less

Submitted 11 October, 2023; v1 submitted 6 October, 2023; originally announced October 2023.

A Joint Fermi-GBM and Swift-BAT Analysis of Gravitational-Wave Candidates from the Third Gravitational-wave Observing Run

Authors: C. Fletcher, J. Wood, R. Hamburg, P. Veres, C. M. Hui, E. Bissaldi, M. S. Briggs, E. Burns, W. H. Cleveland, M. M. Giles, A. Goldstein, B. A. Hristov, D. Kocevski, S. Lesage, B. Mailyan, C. Malacaria, S. Poolakkil, A. von Kienlin, C. A. Wilson-Hodge, The Fermi Gamma-ray Burst Monitor Team, M. Crnogorčević, J. DeLaunay, A. Tohuvavohu, R. Caputo, S. B. Cenko , et al. (1674 additional authors not shown)

Abstract: We present Fermi Gamma-ray Burst Monitor (Fermi-GBM) and Swift Burst Alert Telescope (Swift-BAT) searches for gamma-ray/X-ray counterparts to gravitational wave (GW) candidate events identified during the third observing run of the Advanced LIGO and Advanced Virgo detectors. Using Fermi-GBM on-board triggers and sub-threshold gamma-ray burst (GRB) candidates found in the Fermi-GBM ground analyses,… ▽ More We present Fermi Gamma-ray Burst Monitor (Fermi-GBM) and Swift Burst Alert Telescope (Swift-BAT) searches for gamma-ray/X-ray counterparts to gravitational wave (GW) candidate events identified during the third observing run of the Advanced LIGO and Advanced Virgo detectors. Using Fermi-GBM on-board triggers and sub-threshold gamma-ray burst (GRB) candidates found in the Fermi-GBM ground analyses, the Targeted Search and the Untargeted Search, we investigate whether there are any coincident GRBs associated with the GWs. We also search the Swift-BAT rate data around the GW times to determine whether a GRB counterpart is present. No counterparts are found. Using both the Fermi-GBM Targeted Search and the Swift-BAT search, we calculate flux upper limits and present joint upper limits on the gamma-ray luminosity of each GW. Given these limits, we constrain theoretical models for the emission of gamma-rays from binary black hole mergers. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Search for Eccentric Black Hole Coalescences during the Third Observing Run of LIGO and Virgo

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, A. G. Abac, R. Abbott, H. Abe, F. Acernese, K. Ackley, C. Adamcewicz, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, O. D. Aguiar, I. Aguilar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi , et al. (1750 additional authors not shown)

Abstract: Despite the growing number of confident binary black hole coalescences observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include effect… ▽ More Despite the growing number of confident binary black hole coalescences observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include effects of eccentricity. Here, we present observational results for a waveform-independent search sensitive to eccentric black hole coalescences, covering the third observing run (O3) of the LIGO and Virgo detectors. We identified no new high-significance candidates beyond those that were already identified with searches focusing on quasi-circular binaries. We determine the sensitivity of our search to high-mass (total mass $M>70$ $M_\odot$) binaries covering eccentricities up to 0.3 at 15 Hz orbital frequency, and use this to compare model predictions to search results. Assuming all detections are indeed quasi-circular, for our fiducial population model, we place an upper limit for the merger rate density of high-mass binaries with eccentricities $0 < e \leq 0.3$ at $0.33$ Gpc$^{-3}$ yr$^{-1}$ at 90\% confidence level. △ Less

Submitted 7 August, 2023; originally announced August 2023.

Comments: 24 pages, 5 figures

Report number: LIGO-P2300080

14 Examples of How LLMs Can Transform Materials Science and Chemistry: A Reflection on a Large Language Model Hackathon

Authors: Kevin Maik Jablonka, Qianxiang Ai, Alexander Al-Feghali, Shruti Badhwar, Joshua D. Bocarsly, Andres M Bran, Stefan Bringuier, L. Catherine Brinson, Kamal Choudhary, Defne Circi, Sam Cox, Wibe A. de Jong, Matthew L. Evans, Nicolas Gastellu, Jerome Genzling, María Victoria Gil, Ankur K. Gupta, Zhi Hong, Alishba Imran, Sabine Kruschwitz, Anne Labarre, Jakub Lála, Tao Liu, Steven Ma, Sauradeep Majumdar , et al. (28 additional authors not shown)

Abstract: Large-language models (LLMs) such as GPT-4 caught the interest of many scientists. Recent studies suggested that these models could be useful in chemistry and materials science. To explore these possibilities, we organized a hackathon. This article chronicles the projects built as part of this hackathon. Participants employed LLMs for various applications, including predicting properties of mole… ▽ More Large-language models (LLMs) such as GPT-4 caught the interest of many scientists. Recent studies suggested that these models could be useful in chemistry and materials science. To explore these possibilities, we organized a hackathon. This article chronicles the projects built as part of this hackathon. Participants employed LLMs for various applications, including predicting properties of molecules and materials, designing novel interfaces for tools, extracting knowledge from unstructured data, and developing new educational applications. The diverse topics and the fact that working prototypes could be generated in less than two days highlight that LLMs will profoundly impact the future of our fields. The rich collection of ideas and projects also indicates that the applications of LLMs are not limited to materials science and chemistry but offer potential benefits to a wide range of scientific disciplines. △ Less

Submitted 14 July, 2023; v1 submitted 9 June, 2023; originally announced June 2023.

Machine Learning Prediction of Critical Cooling Rate for Metallic Glasses From Expanded Datasets and Elemental Features

Authors: Benjamin T. Afflerbach, Carter Francis, Lane E. Schultz, Janine Spethson, Vanessa Meschke, Elliot Strand, Logan Ward, John H. Perepezko, Dan Thoma, Paul M. Voyles, Izabela Szlufarska, Dane Morgan

Abstract: We use a random forest model to predict the critical cooling rate (RC) for glass formation of various alloys from features of their constituent elements. The random forest model was trained on a database that integrates multiple sources of direct and indirect RC data for metallic glasses to expand the directly measured RC database of less than 100 values to a training set of over 2,000 values. The… ▽ More We use a random forest model to predict the critical cooling rate (RC) for glass formation of various alloys from features of their constituent elements. The random forest model was trained on a database that integrates multiple sources of direct and indirect RC data for metallic glasses to expand the directly measured RC database of less than 100 values to a training set of over 2,000 values. The model error on 5-fold cross validation is 0.66 orders of magnitude in K/s. The error on leave out one group cross validation on alloy system groups is 0.59 log units in K/s when the target alloy constituents appear more than 500 times in training data. Using this model, we make predictions for the set of compositions with melt-spun glasses in the database, and for the full set of quaternary alloys that have constituents which appear more than 500 times in training data. These predictions identify a number of potential new bulk metallic glass (BMG) systems for future study, but the model is most useful for identification of alloy systems likely to contain good glass formers, rather than detailed discovery of bulk glass composition regions within known glassy systems. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Journal ref: Chemistry of Materials, 2022, 34(7), 2945-2954

Accelerating Communications in Federated Applications with Transparent Object Proxies

Authors: J. Gregory Pauloski, Valerie Hayot-Sasson, Logan Ward, Nathaniel Hudson, Charlie Sabino, Matt Baughman, Kyle Chard, Ian Foster

Abstract: Advances in networks, accelerators, and cloud services encourage programmers to reconsider where to compute -- such as when fast networks make it cost-effective to compute on remote accelerators despite added latency. Workflow and cloud-hosted serverless computing frameworks can manage multi-step computations spanning federated collections of cloud, high-performance computing (HPC), and edge syste… ▽ More Advances in networks, accelerators, and cloud services encourage programmers to reconsider where to compute -- such as when fast networks make it cost-effective to compute on remote accelerators despite added latency. Workflow and cloud-hosted serverless computing frameworks can manage multi-step computations spanning federated collections of cloud, high-performance computing (HPC), and edge systems, but passing data among computational steps via cloud storage can incur high costs. Here, we overcome this obstacle with a new programming paradigm that decouples control flow from data flow by extending the pass-by-reference model to distributed applications. We describe ProxyStore, a system that implements this paradigm by providing object proxies that act as wide-area object references with just-in-time resolution. This proxy model enables data producers to communicate data unilaterally, transparently, and efficiently to both local and remote consumers. We demonstrate the benefits of this model with synthetic benchmarks and real-world scientific applications, running across various computing platforms. △ Less

Submitted 29 August, 2023; v1 submitted 16 May, 2023; originally announced May 2023.

Comments: Accepted for publication at the International Conference for High Performance Computing, Networking, Storage and Analysis (SC23)

Search for gravitational-lensing signatures in the full third observing run of the LIGO-Virgo network

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, C. Alléné, A. Allocca, P. A. Altin , et al. (1670 additional authors not shown)

Abstract: Gravitational lensing by massive objects along the line of sight to the source causes distortions of gravitational wave-signals; such distortions may reveal information about fundamental physics, cosmology and astrophysics. In this work, we have extended the search for lensing signatures to all binary black hole events from the third observing run of the LIGO--Virgo network. We search for repeated… ▽ More Gravitational lensing by massive objects along the line of sight to the source causes distortions of gravitational wave-signals; such distortions may reveal information about fundamental physics, cosmology and astrophysics. In this work, we have extended the search for lensing signatures to all binary black hole events from the third observing run of the LIGO--Virgo network. We search for repeated signals from strong lensing by 1) performing targeted searches for subthreshold signals, 2) calculating the degree of overlap amongst the intrinsic parameters and sky location of pairs of signals, 3) comparing the similarities of the spectrograms amongst pairs of signals, and 4) performing dual-signal Bayesian analysis that takes into account selection effects and astrophysical knowledge. We also search for distortions to the gravitational waveform caused by 1) frequency-independent phase shifts in strongly lensed images, and 2) frequency-dependent modulation of the amplitude and phase due to point masses. None of these searches yields significant evidence for lensing. Finally, we use the non-detection of gravitational-wave lensing to constrain the lensing rate based on the latest merger-rate estimates and the fraction of dark matter composed of compact objects. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Comments: 28 pages, 11 figures

Report number: LIGO-P2200031

Workflows Community Summit 2022: A Roadmap Revolution

Authors: Rafael Ferreira da Silva, Rosa M. Badia, Venkat Bala, Debbie Bard, Peer-Timo Bremer, Ian Buckley, Silvina Caino-Lores, Kyle Chard, Carole Goble, Shantenu Jha, Daniel S. Katz, Daniel Laney, Manish Parashar, Frederic Suter, Nick Tyler, Thomas Uram, Ilkay Altintas, Stefan Andersson, William Arndt, Juan Aznar, Jonathan Bader, Bartosz Balis, Chris Blanton, Kelly Rosa Braghetto, Aharon Brodutch , et al. (80 additional authors not shown)

Abstract: Scientific workflows have become integral tools in broad scientific computing use cases. Science discovery is increasingly dependent on workflows to orchestrate large and complex scientific experiments that range from execution of a cloud-based data preprocessing pipeline to multi-facility instrument-to-edge-to-HPC computational workflows. Given the changing landscape of scientific computing and t… ▽ More Scientific workflows have become integral tools in broad scientific computing use cases. Science discovery is increasingly dependent on workflows to orchestrate large and complex scientific experiments that range from execution of a cloud-based data preprocessing pipeline to multi-facility instrument-to-edge-to-HPC computational workflows. Given the changing landscape of scientific computing and the evolving needs of emerging scientific applications, it is paramount that the development of novel scientific workflows and system functionalities seek to increase the efficiency, resilience, and pervasiveness of existing systems and applications. Specifically, the proliferation of machine learning/artificial intelligence (ML/AI) workflows, need for processing large scale datasets produced by instruments at the edge, intensification of near real-time data processing, support for long-term experiment campaigns, and emergence of quantum computing as an adjunct to HPC, have significantly changed the functional and operational requirements of workflow systems. Workflow systems now need to, for example, support data streams from the edge-to-cloud-to-HPC enable the management of many small-sized files, allow data reduction while ensuring high accuracy, orchestrate distributed services (workflows, instruments, data movement, provenance, publication, etc.) across computing and user facilities, among others. Further, to accelerate science, it is also necessary that these systems implement specifications/standards and APIs for seamless (horizontal and vertical) integration between systems and applications, as well as enabling the publication of workflows and their associated products according to the FAIR principles. This document reports on discussions and findings from the 2022 international edition of the Workflows Community Summit that took place on November 29 and 30, 2022. △ Less

Submitted 31 March, 2023; originally announced April 2023.

Report number: ORNL/TM-2023/2885

Collinearly Enhanced Realizations of the YFS MC Approach to Precision Resummation Theory

Authors: S. Jadach, B. F. L. Ward, Z. A. Was

Abstract: We extend the YFS IR resummation theory to include all of the attendant collinear contributions which exponentiate. This improves the original YFS formulation in which only a part of these contributions was exponentiated. We show that the new resummed contributions agree with known results from the collinear factorization approach and we argue that they improve the attendant precision tag for a gi… ▽ More We extend the YFS IR resummation theory to include all of the attendant collinear contributions which exponentiate. This improves the original YFS formulation in which only a part of these contributions was exponentiated. We show that the new resummed contributions agree with known results from the collinear factorization approach and we argue that they improve the attendant precision tag for a given level of exactness in the respective YFS hard radiation residuals. △ Less

Submitted 28 November, 2023; v1 submitted 24 March, 2023; originally announced March 2023.

Comments: 14 pages, 2 figures, improved text, references; typos corrected; extended and improved text. arXiv admin note: text overlap with arXiv:2203.12557

Report number: BU-HEPP-23-01

Cloud Services Enable Efficient AI-Guided Simulation Workflows across Heterogeneous Resources

Authors: Logan Ward, J. Gregory Pauloski, Valerie Hayot-Sasson, Ryan Chard, Yadu Babuji, Ganesh Sivaraman, Sutanay Choudhury, Kyle Chard, Rajeev Thakur, Ian Foster

Abstract: Applications that fuse machine learning and simulation can benefit from the use of multiple computing resources, with, for example, simulation codes running on highly parallel supercomputers and AI training and inference tasks on specialized accelerators. Here, we present our experiences deploying two AI-guided simulation workflows across such heterogeneous systems. A unique aspect of our approach… ▽ More Applications that fuse machine learning and simulation can benefit from the use of multiple computing resources, with, for example, simulation codes running on highly parallel supercomputers and AI training and inference tasks on specialized accelerators. Here, we present our experiences deploying two AI-guided simulation workflows across such heterogeneous systems. A unique aspect of our approach is our use of cloud-hosted management services to manage challenging aspects of cross-resource authentication and authorization, function-as-a-service (FaaS) function invocation, and data transfer. We show that these methods can achieve performance parity with systems that rely on direct connection between resources. We achieve parity by integrating the FaaS system and data transfer capabilities with a system that passes data by reference among managers and workers, and a user-configurable steering algorithm to hide data transfer latencies. We anticipate that this ease of use can enable routine use of heterogeneous resources in computational science. △ Less

Submitted 15 March, 2023; originally announced March 2023.

Open data from the third observing run of LIGO, Virgo, KAGRA and GEO

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, A. Al-Jodah, C. Alléné, A. Allocca , et al. (1719 additional authors not shown)

Abstract: The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in April of 2019 and lasting six months, O3b starting in November of 2019 and lasting five months, and O3GK starting in April of 2020 and lasti… ▽ More The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in April of 2019 and lasting six months, O3b starting in November of 2019 and lasting five months, and O3GK starting in April of 2020 and lasting 2 weeks. In this paper we describe these data and various other science products that can be freely accessed through the Gravitational Wave Open Science Center at https://gwosc.org. The main dataset, consisting of the gravitational-wave strain time series that contains the astrophysical signals, is released together with supporting data useful for their analysis and documentation, tutorials, as well as analysis software packages. △ Less

Submitted 7 February, 2023; originally announced February 2023.

Comments: 27 pages, 3 figures

Report number: LIGO-P2200316

Search for subsolar-mass black hole binaries in the second part of Advanced LIGO's and Advanced Virgo's third observing run

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, C. Alléné, A. Allocca, P. A. Altin , et al. (1680 additional authors not shown)

Abstract: We describe a search for gravitational waves from compact binaries with at least one component with mass 0.2 $M_\odot$ -- $1.0 M_\odot$ and mass ratio $q \geq 0.1$ in Advanced LIGO and Advanced Virgo data collected between 1 November 2019, 15:00 UTC and 27 March 2020, 17:00 UTC. No signals were detected. The most significant candidate has a false alarm rate of 0.2 $\mathrm{yr}^{-1}$. We estimate t… ▽ More We describe a search for gravitational waves from compact binaries with at least one component with mass 0.2 $M_\odot$ -- $1.0 M_\odot$ and mass ratio $q \geq 0.1$ in Advanced LIGO and Advanced Virgo data collected between 1 November 2019, 15:00 UTC and 27 March 2020, 17:00 UTC. No signals were detected. The most significant candidate has a false alarm rate of 0.2 $\mathrm{yr}^{-1}$. We estimate the sensitivity of our search over the entirety of Advanced LIGO's and Advanced Virgo's third observing run, and present the most stringent limits to date on the merger rate of binary black holes with at least one subsolar-mass component. We use the upper limits to constrain two fiducial scenarios that could produce subsolar-mass black holes: primordial black holes (PBH) and a model of dissipative dark matter. The PBH model uses recent prescriptions for the merger rate of PBH binaries that include a rate suppression factor to effectively account for PBH early binary disruptions. If the PBHs are monochromatically distributed, we can exclude a dark matter fraction in PBHs $f_\mathrm{PBH} \gtrsim 0.6$ (at 90% confidence) in the probed subsolar-mass range. However, if we allow for broad PBH mass distributions we are unable to rule out $f_\mathrm{PBH} = 1$. For the dissipative model, where the dark matter has chemistry that allows a small fraction to cool and collapse into black holes, we find an upper bound $f_{\mathrm{DBH}} < 10^{-5}$ on the fraction of atomic dark matter collapsed into black holes. △ Less

Submitted 26 January, 2024; v1 submitted 2 December, 2022; originally announced December 2022.

Comments: https://dcc.ligo.org/P2200139

KKMChh: matching CEEX photonic ISR to a QED-corrected parton shower

Authors: S. A. Yost, S. Jadach, B. F. L. Ward, Z. Wąs

Abstract: KKMChh adapts the CEEX (Coherent Exclusive Exponentiation) formalism of the Monte Carlo Program KKMC for Z boson production and decay to hadron scattering. Amplitude-level soft photon exponentiation of initial and final state radiation, together with initial-final interference, is matched to a perturbative calculation to second order next-to-leading logarithm, and electroweak corrections to the ha… ▽ More KKMChh adapts the CEEX (Coherent Exclusive Exponentiation) formalism of the Monte Carlo Program KKMC for Z boson production and decay to hadron scattering. Amplitude-level soft photon exponentiation of initial and final state radiation, together with initial-final interference, is matched to a perturbative calculation to second order next-to-leading logarithm, and electroweak corrections to the hard process are included via DIZET. The first release of KKMChh included complete initial state radiation calculated with current quark masses. This version assumes idealized pure-QCD PDFs with negligible QED contamination. Traditional PDFs neglect QED evolution but are not necessarily free of QED influence in the data. QED-corrected PDFs provide a firmer starting point for precision QED work. We describe a new procedure for matching KKMChh's initial state radiation to a QED-corrected PDF, and compare this to earlier approaches. △ Less

Submitted 1 December, 2022; v1 submitted 30 November, 2022; originally announced November 2022.

Comments: Presented by S. Yost at ICHEP 2022, Bologna Italy, July 6 - 13, 2022; 6 pages with 3 figures. Update adds a hyperlink to one reference. Now matches the published proceedings version exactly

Report number: BU-HEPP-22-03

Journal ref: PoS(ICHEP2022)887

Overview of IR-Improvement in Precision LHC/FCC Physics

Authors: S. A. Yost, Y. Liu, B. Shakerin, B. F. L. Ward

Abstract: We present an overview of the use of IR-improvement of unintegrable singularities in the infrared regime via amplitude-based resummation in $\mathrm{QED} \times \mathrm{QCD}$ $\subset$ $\mathrm{SU}(2)_L \times \mathrm{U}_1 \times \mathrm{SU}(3)^c$. We work in the context of precision LHC/FCC physics. While illustrating such IR-improvement in specific examples, we discuss new results and new issues… ▽ More We present an overview of the use of IR-improvement of unintegrable singularities in the infrared regime via amplitude-based resummation in $\mathrm{QED} \times \mathrm{QCD}$ $\subset$ $\mathrm{SU}(2)_L \times \mathrm{U}_1 \times \mathrm{SU}(3)^c$. We work in the context of precision LHC/FCC physics. While illustrating such IR-improvement in specific examples, we discuss new results and new issues. △ Less

Submitted 27 November, 2022; originally announced November 2022.

Comments: Poster presentation at ICHEP2022, Bologna, Italy, July 6 - 13, 2022; 4 pages, 2 figures

Report number: BU-HEPP-22-04

Journal ref: PoS(ICHEP2022)1204

Overview of theoretical precision of the luminosity at future electron-positron colliders

Authors: B. F. L. Ward, S. Jadach, W. Placzek, M. Skrzypek, S. A. Yost

Abstract: For both the FCC-ee and the ILC, to exploit properly the respective precision physics program, the theoretical precision tag on the respective luminosity will need to be improved from the analogs of the $ 0.054 \% (0.061\%)$ results at LEP at $M_Z$, where the former (latter) LEP result has (does not have) the pairs correction. At the FCC-ee at $M_Z$ one needs improvement to $0.01\%$, for example.… ▽ More For both the FCC-ee and the ILC, to exploit properly the respective precision physics program, the theoretical precision tag on the respective luminosity will need to be improved from the analogs of the $ 0.054 \% (0.061\%)$ results at LEP at $M_Z$, where the former (latter) LEP result has (does not have) the pairs correction. At the FCC-ee at $M_Z$ one needs improvement to $0.01\%$, for example. We present an overview of the roads one may take to reach the required $0.01\%$ precision tag at the FCC-ee and of what the corresponding precision expectations would be for the FCC-ee$_{350}$, ILC$_{500}$, ILC$_{1000}$, and CLIC$_{3000}$ setups. △ Less

Submitted 25 November, 2022; originally announced November 2022.

Comments: 6 pages, 5 tables, talk presented by BFLW at ICHEP2022, Bologna, Italy, 7/7/2022

Report number: BU-HEPP-22-06

Journal ref: PoS(ICHEP2022)1214

Quantifying the performance of machine learning models in materials discovery

Authors: Christopher K. H. Borg, Eric S. Muckley, Clara Nyby, James E. Saal, Logan Ward, Apurva Mehta, Bryce Meredig

Abstract: The predictive capabilities of machine learning (ML) models used in materials discovery are typically measured using simple statistics such as the root-mean-square error (RMSE) or the coefficient of determination ($r^2$) between ML-predicted materials property values and their known values. A tempting assumption is that models with low error should be effective at guiding materials discovery, and… ▽ More The predictive capabilities of machine learning (ML) models used in materials discovery are typically measured using simple statistics such as the root-mean-square error (RMSE) or the coefficient of determination ($r^2$) between ML-predicted materials property values and their known values. A tempting assumption is that models with low error should be effective at guiding materials discovery, and conversely, models with high error should give poor discovery performance. However, we observe that no clear connection exists between a "static" quantity averaged across an entire training set, such as RMSE, and an ML property model's ability to dynamically guide the iterative (and often extrapolative) discovery of novel materials with targeted properties. In this work, we simulate a sequential learning (SL)-guided materials discovery process and demonstrate a decoupling between traditional model error metrics and model performance in guiding materials discoveries. We show that model performance in materials discovery depends strongly on (1) the target range within the property distribution (e.g., whether a 1st or 10th decile material is desired); (2) the incorporation of uncertainty estimates in the SL acquisition function; (3) whether the scientist is interested in one discovery or many targets; and (4) how many SL iterations are allowed. To overcome the limitations of static metrics and robustly capture SL performance, we recommend metrics such as Discovery Yield ($DY$), a measure of how many high-performing materials were discovered during SL, and Discovery Probability ($DP$), a measure of likelihood of discovering high-performing materials at any point in the SL process. △ Less

Submitted 24 October, 2022; originally announced October 2022.

Search for gravitational-wave transients associated with magnetar bursts in Advanced LIGO and Advanced Virgo data from the third observing run

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, K. Agatsuma, N. Aggarwal, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, A. Allocca, P. A. Altin , et al. (1645 additional authors not shown)

Abstract: Gravitational waves are expected to be produced from neutron star oscillations associated with magnetar giant flares and short bursts. We present the results of a search for short-duration (milliseconds to seconds) and long-duration ($\sim$ 100 s) transient gravitational waves from 13 magnetar short bursts observed during Advanced LIGO, Advanced Virgo and KAGRA's third observation run. These 13 bu… ▽ More Gravitational waves are expected to be produced from neutron star oscillations associated with magnetar giant flares and short bursts. We present the results of a search for short-duration (milliseconds to seconds) and long-duration ($\sim$ 100 s) transient gravitational waves from 13 magnetar short bursts observed during Advanced LIGO, Advanced Virgo and KAGRA's third observation run. These 13 bursts come from two magnetars, SGR 1935$+$2154 and Swift J1818.0$-$1607. We also include three other electromagnetic burst events detected by Fermi GBM which were identified as likely coming from one or more magnetars, but they have no association with a known magnetar. No magnetar giant flares were detected during the analysis period. We find no evidence of gravitational waves associated with any of these 16 bursts. We place upper bounds on the root-sum-square of the integrated gravitational-wave strain that reach $2.2 \times 10^{-23}$ $/\sqrt{\text{Hz}}$ at 100 Hz for the short-duration search and $8.7 \times 10^{-23}$ $/\sqrt{\text{Hz}}$ at $450$ Hz for the long-duration search, given a detection efficiency of 50%. For a ringdown signal at 1590 Hz targeted by the short-duration search the limit is set to $1.8 \times 10^{-22}$ $/\sqrt{\text{Hz}}$. Using the estimated distance to each magnetar, we derive upper bounds on the emitted gravitational-wave energy of $3.2 \times 10^{43}$ erg ($7.3 \times 10^{43}$ erg) for SGR 1935$+$2154 and $8.2 \times 10^{42}$ erg ($2.8 \times 10^{43}$ erg) for Swift J1818.0$-$1607, for the short-duration (long-duration) search. Assuming isotropic emission of electromagnetic radiation of the burst fluences, we constrain the ratio of gravitational-wave energy to electromagnetic energy for bursts from SGR 1935$+$2154 with available fluence information. The lowest of these ratios is $3 \times 10^3$. △ Less

Submitted 19 October, 2022; originally announced October 2022.

Comments: 30 pages with appendices, 5 figures, 10 tables

Report number: LIGO-P2100387

Towards a multi-tracer timeline of star formation in the LMC -- II. The formation and destruction of molecular clouds

Authors: Jacob L. Ward, J. M. Diederik Kruijssen, Mélanie Chevance, Jaeyeon Kim, Steven N. Longmore

Abstract: The time-scales associated with various stages of the star formation process represent major unknowns in our understanding of galactic evolution, as well as of star and planet formation. This is the second paper in a series aiming to establish a multi-tracer time-line of star formation in the Large Magellanic Cloud (LMC), focusing on the lifecycle of molecular clouds. We use a statistical method t… ▽ More The time-scales associated with various stages of the star formation process represent major unknowns in our understanding of galactic evolution, as well as of star and planet formation. This is the second paper in a series aiming to establish a multi-tracer time-line of star formation in the Large Magellanic Cloud (LMC), focusing on the lifecycle of molecular clouds. We use a statistical method to determine a molecular cloud lifetime in the LMC of $t_{\text{CO}}=11.8^{+2.7}_{-2.2}$ Myr. This short time-scale is similar to the cloud dynamical time, and suggests that molecular clouds in the LMC are largely decoupled from the effects of galactic dynamics and have lifetimes set by internal processes. This provides a clear contrast to atomic clouds in the LMC, of which the lifetimes are correlated with galactic dynamical time-scales. We additionally derive the time-scale for which molecular clouds and HII regions co-exist as $t_{\text{fb}}=1.2^{+0.3}_{-0.2}$ Myr, implying an average feedback front expansion velocity of 12 km s$^{-1}$, consistent with expansion velocities of HII regions in the LMC observed directly using optical spectroscopy. Taken together, these results imply that the molecular cloud lifecycle in the LMC proceeds rapidly and is regulated by internal dynamics and stellar feedback. We conclude by discussing our measurements in the context of previous work in the literature, which reported considerably longer lifetimes for molecular clouds in the LMC, and find that these previous findings resulted from a subjective choice in timeline calibration that is avoided by our statistical methodology. △ Less

Submitted 12 September, 2022; originally announced September 2022.

Comments: 18 pages (including appendices), 10 figures, 2 tables; MNRAS in press (accepted August 15, 2022). Figures 3, 4, 5, and 7 show the main results of the paper

Model-based cross-correlation search for gravitational waves from the low-mass X-ray binary Scorpius X-1 in LIGO O3 data

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, C. Alléné, A. Allocca, P. A. Altin , et al. (1670 additional authors not shown)

Abstract: We present the results of a model-based search for continuous gravitational waves from the low-mass X-ray binary Scorpius X-1 using LIGO detector data from the third observing run of Advanced LIGO, Advanced Virgo and KAGRA. This is a semicoherent search which uses details of the signal model to coherently combine data separated by less than a specified coherence time, which can be adjusted to bala… ▽ More We present the results of a model-based search for continuous gravitational waves from the low-mass X-ray binary Scorpius X-1 using LIGO detector data from the third observing run of Advanced LIGO, Advanced Virgo and KAGRA. This is a semicoherent search which uses details of the signal model to coherently combine data separated by less than a specified coherence time, which can be adjusted to balance sensitivity with computing cost. The search covered a range of gravitational-wave frequencies from 25Hz to 1600Hz, as well as ranges in orbital speed, frequency and phase determined from observational constraints. No significant detection candidates were found, and upper limits were set as a function of frequency. The most stringent limits, between 100Hz and 200Hz, correspond to an amplitude h0 of about 1e-25 when marginalized isotropically over the unknown inclination angle of the neutron star's rotation axis, or less than 4e-26 assuming the optimal orientation. The sensitivity of this search is now probing amplitudes predicted by models of torque balance equilibrium. For the usual conservative model assuming accretion at the surface of the neutron star, our isotropically-marginalized upper limits are close to the predicted amplitude from about 70Hz to 100Hz; the limits assuming the neutron star spin is aligned with the most likely orbital angular momentum are below the conservative torque balance predictions from 40Hz to 200Hz. Assuming a broader range of accretion models, our direct limits on gravitational-wave amplitude delve into the relevant parameter space over a wide range of frequencies, to 500Hz or more. △ Less

Submitted 2 January, 2023; v1 submitted 6 September, 2022; originally announced September 2022.

Comments: 19 pages, Open Access Journal PDF

Report number: LIGO-P2100110-v13

Journal ref: The Astrophysical Journal Letters, 941, L30 (2022)

Rapid Production of Accurate Embedded-Atom Method Potentials for Metal Alloys

Authors: Elan J. Weiss, Logan Ward, Christian Oberdorfer, Travis Withrow, David C. Riegner, Anupriya Agrawal, Wolfgang Windl

Abstract: A critical limitation to the wide-scale use of classical molecular dynamics for alloy design is the limited availability of suitable interatomic potentials. Here, we introduce the Rapid Alloy Method for Producing Accurate General Empirical Potentials or RAMPAGE, a computationally economical procedure to generate binary embedded-atom model potentials from already-existing single-element potentials… ▽ More A critical limitation to the wide-scale use of classical molecular dynamics for alloy design is the limited availability of suitable interatomic potentials. Here, we introduce the Rapid Alloy Method for Producing Accurate General Empirical Potentials or RAMPAGE, a computationally economical procedure to generate binary embedded-atom model potentials from already-existing single-element potentials that can be further combined into multi-component alloy potentials. We present the quality of RAMPAGE calibrated Finnis-Sinclair type EAM potentials using binary Ag-Al and ternary Ag-Au-Cu as case studies. We demonstrate that RAMPAGE potentials can reproduce bulk properties and forces with greater accuracy than that of other alloy potentials. In some simulations, it is observed the quality of the optimized cross interactions can exceed that of the original off-the-shelf elemental potential inputs. △ Less

Submitted 3 August, 2022; originally announced August 2022.

Mapping Thermoelectric Transport in a Multicomponent Alloy Space

Authors: Ramya Gurunathan, Suchismita Sarker, Christopher K. H. Borg, James Saal, Logan Ward, Apurva Mehta, G. Jeffrey Snyder

Abstract: Interest in high entropy alloy thermoelectric materials is predicated on achieving ultralow lattice thermal conductivity $κ\sub{L}$ through large compositional disorder. However, here we show that for a given mechanism, such as mass contrast phonon scattering, $κ\sub{L}$ will be minimized along the binary alloy with the highest mass contrast, such that adding an intermediate-mass atom to increase… ▽ More Interest in high entropy alloy thermoelectric materials is predicated on achieving ultralow lattice thermal conductivity $κ\sub{L}$ through large compositional disorder. However, here we show that for a given mechanism, such as mass contrast phonon scattering, $κ\sub{L}$ will be minimized along the binary alloy with the highest mass contrast, such that adding an intermediate-mass atom to increase atomic disorder can increase thermal conductivity. Only when each component adds an independent scattering mechanism (such as adding strain fluctuation to an existing mass fluctuation) is there a benefit. In addition, both charge carriers and heat-carrying phonons are known to experience scattering due to alloying effects, leading to a trade-off in thermoelectric performance. We apply analytic transport models, based on perturbation and effective medium theories, to predict how alloy scattering will affect the thermal and electronic transport across the full compositional range of several pseudo-ternary and pseudo-quaternary alloy systems. To do so, we demonstrate a multicomponent extension to both thermal and electronic binary alloy scattering models based on the virtual crystal approximation. Finally, we show that common functional forms used in computational thermodynamics can be applied to this problem to further generalize the scattering behavior that is modeled. △ Less

Submitted 3 May, 2022; originally announced May 2022.

Multi-photon Monte Carlo event generator KKMCee for lepton and quark pair production in lepton colliders

Authors: S. Jadach, B. F. L. Ward, Z. Was, S. A. Yost, A. Siodmok

Abstract: We present the {\tt KKMCee 5.00.2} Monte Carlo event generator for lepton and quark pair production for the high energy electron-positron annihilation process. It is still the most sophisticated event generator for such processes. Its entire source code is re-written in the modern C++ language. It reproduces all features of the older \kkmc\ code in Fortran 77. However, a number of improvements in… ▽ More We present the {\tt KKMCee 5.00.2} Monte Carlo event generator for lepton and quark pair production for the high energy electron-positron annihilation process. It is still the most sophisticated event generator for such processes. Its entire source code is re-written in the modern C++ language. It reproduces all features of the older \kkmc\ code in Fortran 77. However, a number of improvements in the Monte Carlo algorithm are also implemented. Most importantly, it is intended to be a starting point for the future improvements, which will be mandatory for the future high precision lepton collider projects. As in the older version, in addition to higher order QED corrections, it includes so-called \order{α^{1.5}} genuine weak corrections using a version of the classic {\tt DIZET} library and polarized $τ$ decays using {\tt TAUOLA} program. Both {\tt DIZET} and {\tt TAUOLA} external libraries are still in Fortran 77. In addition, a {\tt HEPMC3} interface to other MC programs, like parton showers and detector simulation, replaces the older {\tt HepEvt} interface. The {\tt HEPMC3} interface is also exploited in the implementation of the additional photon final state emissions in $τ$ decays using an external {\tt PHOTOS} library rewritten in C. △ Less

Submitted 29 August, 2022; v1 submitted 25 April, 2022; originally announced April 2022.

Comments: To be submitted to Computer Physics Communications

Report number: IFJPAN-IV-2022-6, BU-HEPP-22-02, MCnet-22

Journal ref: Comput. Phys. Commun. 283 (2023) 108556

Search for continuous gravitational wave emission from the Milky Way center in O3 LIGO--Virgo data

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, K. Agatsuma, N. Aggarwal, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, A. Allocca, P. A. Altin , et al. (1645 additional authors not shown)

Abstract: We present a directed search for continuous gravitational wave (CW) signals emitted by spinning neutron stars located in the inner parsecs of the Galactic Center (GC). Compelling evidence for the presence of a numerous population of neutron stars has been reported in the literature, turning this region into a very interesting place to look for CWs. In this search, data from the full O3 LIGO--Virgo… ▽ More We present a directed search for continuous gravitational wave (CW) signals emitted by spinning neutron stars located in the inner parsecs of the Galactic Center (GC). Compelling evidence for the presence of a numerous population of neutron stars has been reported in the literature, turning this region into a very interesting place to look for CWs. In this search, data from the full O3 LIGO--Virgo run in the detector frequency band $[10,2000]\rm~Hz$ have been used. No significant detection was found and 95$\%$ confidence level upper limits on the signal strain amplitude were computed, over the full search band, with the deepest limit of about $7.6\times 10^{-26}$ at $\simeq 142\rm~Hz$. These results are significantly more constraining than those reported in previous searches. We use these limits to put constraints on the fiducial neutron star ellipticity and r-mode amplitude. These limits can be also translated into constraints in the black hole mass -- boson mass plane for a hypothetical population of boson clouds around spinning black holes located in the GC. △ Less

Submitted 9 April, 2022; originally announced April 2022.

Comments: 25 pages, 5 figures

Initial state QED radiation aspects for future $e^+e^-$ colliders

Authors: S. Frixione, E. Laenen, C. M. Carloni Calame, A. Denner, S. Dittmaier, T. Engel, L. Flower, L. Gellersen, S. Hoeche, S. Jadach, M. R. Masouminia, G. Montagna, O. Nicrosini, F. Piccinini, S. Plätzer, A. Price, J. Reuter, M. Rocco, M. Schönherr, A. Signer, T. Sjöstrand, G. Stagnitto, Y. Ulrich, R. Verheyen, L. Vernazza , et al. (3 additional authors not shown)

Abstract: This white paper concerns theoretical and phenomenological aspects relevant to the physics of future $e^+e^-$ colliders, in particular regarding initial-state QED radiation. The contributions each contain key technical aspects, and are formulated in a pedagogical manner so as to render them accessible also to those who are not directly working on these and immediately-related topics. This should h… ▽ More This white paper concerns theoretical and phenomenological aspects relevant to the physics of future $e^+e^-$ colliders, in particular regarding initial-state QED radiation. The contributions each contain key technical aspects, and are formulated in a pedagogical manner so as to render them accessible also to those who are not directly working on these and immediately-related topics. This should help both experts and non-experts understand the theoretical challenges that we shall face at future $e^+e^-$ colliders. Specifically, this paper contains descriptions of the treatment of initial state radiation from several Monte Carlo collaborations, as well as contributions that explain a number of more theoretical developments with promise of future phenomenological impact. △ Less

Submitted 27 April, 2022; v1 submitted 23 March, 2022; originally announced March 2022.

Comments: Contribution to: 2022 Snowmass Summer Study

Report number: FERMILAB-PUB-22-129-T

Search for Gravitational Waves Associated with Fast Radio Bursts Detected by CHIME/FRB During the LIGO--Virgo Observing Run O3a

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, the CHIME/FRB Collaboration, :, R. Abbott, T. D. Abbott, F. Acernese, K. Ackley, C. Adams, N. Adhikari, R. X. Adhikari, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, K. Agatsuma, N. Aggarwal, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, A. Allocca , et al. (1633 additional authors not shown)

Abstract: We search for gravitational-wave transients associated with fast radio bursts (FRBs) detected by the Canadian Hydrogen Intensity Mapping Experiment Fast Radio Burst Project (CHIME/FRB), during the first part of the third observing run of Advanced LIGO and Advanced Virgo (1 April 2019 15:00 UTC-1 Oct 2019 15:00 UTC). Triggers from 22 FRBs were analyzed with a search that targets compact binary coal… ▽ More We search for gravitational-wave transients associated with fast radio bursts (FRBs) detected by the Canadian Hydrogen Intensity Mapping Experiment Fast Radio Burst Project (CHIME/FRB), during the first part of the third observing run of Advanced LIGO and Advanced Virgo (1 April 2019 15:00 UTC-1 Oct 2019 15:00 UTC). Triggers from 22 FRBs were analyzed with a search that targets compact binary coalescences with at least one neutron star component. A targeted search for generic gravitational-wave transients was conducted on 40 FRBs. We find no significant evidence for a gravitational-wave association in either search. Given the large uncertainties in the distances of the FRBs inferred from the dispersion measures in our sample, however, this does not conclusively exclude any progenitor models that include emission of a gravitational wave of the types searched for from any of these FRB events. We report $90\%$ confidence lower bounds on the distance to each FRB for a range of gravitational-wave progenitor models. By combining the inferred maximum distance information for each FRB with the sensitivity of the gravitational-wave searches, we set upper limits on the energy emitted through gravitational waves for a range of emission scenarios. We find values of order $10^{51}$-$10^{57}$ erg for a range of different emission models with central gravitational wave frequencies in the range 70-3560 Hz. Finally, we also found no significant coincident detection of gravitational waves with the repeater, FRB 20200120E, which is the closest known extragalactic FRB. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Comments: 35 pages, 6 figures, 8 tables

Report number: P2100124

First joint observation by the underground gravitational-wave detector, KAGRA, with GEO600

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, R. Abbott, H. Abe, F. Acernese, K. Ackley, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, K. Agatsuma, N. Aggarwal, O. D. Aguiar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, A. Allocca, P. A. Altin , et al. (1647 additional authors not shown)

Abstract: We report the results of the first joint observation of the KAGRA detector with GEO600. KAGRA is a cryogenic and underground gravitational-wave detector consisting of a laser interferometer with three-kilometer arms, and located in Kamioka, Gifu, Japan. GEO600 is a British--German laser interferometer with 600 m arms, and located near Hannover, Germany. GEO600 and KAGRA performed a joint observing… ▽ More We report the results of the first joint observation of the KAGRA detector with GEO600. KAGRA is a cryogenic and underground gravitational-wave detector consisting of a laser interferometer with three-kilometer arms, and located in Kamioka, Gifu, Japan. GEO600 is a British--German laser interferometer with 600 m arms, and located near Hannover, Germany. GEO600 and KAGRA performed a joint observing run from April 7 to 20, 2020. We present the results of the joint analysis of the GEO--KAGRA data for transient gravitational-wave signals, including the coalescence of neutron-star binaries and generic unmodeled transients. We also perform dedicated searches for binary coalescence signals and generic transients associated with gamma-ray burst events observed during the joint run. No gravitational-wave events were identified. We evaluate the minimum detectable amplitude for various types of transient signals and the spacetime volume for which the network is sensitive to binary neutron-star coalescences. We also place lower limits on the distances to the gamma-ray bursts analysed based on the non-detection of an associated gravitational-wave signal for several signal models, including binary coalescences. These analyses demonstrate the feasibility and utility of KAGRA as a member of the global gravitational-wave detector network. △ Less

Submitted 19 August, 2022; v1 submitted 2 March, 2022; originally announced March 2022.

Comments: Matches with published version

Report number: LIGO-P2100286

Journal ref: Progress of Theoretical and Experimental Physics, Volume 2022, Issue 6, 063F01 (2022)