-
Evaporation characteristics of Er$^{3+}$ doped silica fiber and its application in the preparation of whispering gallery mode lasers
Authors:
Angzhen Li,
Jonathan M. Ward,
Ke Tian,
Jibo Yu,
Shengfei She,
Chaoqi Hou,
Haitao Guo,
Síle Nic Chormaic,
Pengfei Wang
Abstract:
The fabrication of whispering gallery lasers (WGL) is used to experimentally evaluate the evaporation rate (mol/$μ$m) and ratio (mol/mol) of erbium and silica lost from a doped fiber during heating. Fixed lengths of doped silica fiber are spliced to different lengths of undoped fiber and then evaporated by feeding into the focus of a CO$_{2}$ laser. During evaporation, erbium ions are precipitated…
▽ More
The fabrication of whispering gallery lasers (WGL) is used to experimentally evaluate the evaporation rate (mol/$μ$m) and ratio (mol/mol) of erbium and silica lost from a doped fiber during heating. Fixed lengths of doped silica fiber are spliced to different lengths of undoped fiber and then evaporated by feeding into the focus of a CO$_{2}$ laser. During evaporation, erbium ions are precipitated in the doped silica fiber to control the erbium concentration in the remaining SiO$_2$, which is melted into a microsphere. By increasing the length of the undoped section, a critical point is reached where effectively no ions remain in the glass microsphere. The critical point is found using the lasing spectra of the whispering gallery modes in microspheres with equal sizes. From the critical point, it is estimated that, for a given CO$_{2}$ laser power, $6.36 \times 10^{-21}$~mol of Er$^{3+}$ is lost during the evaporation process for every cubic micron of silica fiber. This is equivalent to $1.74 \times 10^{-7}$~mol of Er$^{3+}$ lost per mol of SiO$_{2}$ evaporated. This result facilitates the control of the doping concentration in WGLs and provides insight into the kinetics of laser-induced evaporation of doped silica.
△ Less
Submitted 12 May, 2023;
originally announced May 2023.
-
A packaged whispering gallery resonator device based on an optical nanoantenna coupler
Authors:
Angzhen Li,
Ke Tian,
Jibo Yu,
Rashmi A. Minz,
Jonathan M. Ward,
Samir Mondal,
Pengfei Wang,
Síle Nic Chormaic
Abstract:
In this work, we present the design and fabrication of a packaged whispering gallery mode (WGM) device based on an optical nanoantenna as the coupler and a glass microsphere as the resonator. The microspheres were fabricated from SiO$_2$ fiber or Er$^{3+}$-doped fiber, the latter creating a WGM laser with a threshold of 93 $μ$W at 1531 nm. The coupler-resonator WGM device is packaged in a glass ca…
▽ More
In this work, we present the design and fabrication of a packaged whispering gallery mode (WGM) device based on an optical nanoantenna as the coupler and a glass microsphere as the resonator. The microspheres were fabricated from SiO$_2$ fiber or Er$^{3+}$-doped fiber, the latter creating a WGM laser with a threshold of 93 $μ$W at 1531 nm. The coupler-resonator WGM device is packaged in a glass capillary. The performance of the packaged microlaser is characterized, with lasing emission both excited in and collected from the WGM cavity via the nanoantenna. The packaged system provides isolation from environmental contamination, a small size, and unidirectional coupling while maintaining a high quality (Q-) factor ($\sim$10$^8$). It opens up new possibilities for practical applications of WGM microdevices in a variety of fields such as low threshold lasers, filters, and sensors.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
A tellurite glass optical microbubble resonator
Authors:
Jibo Yu,
Jiquan Zhang,
Ruicong Wang,
Angzhen Li,
Meng Zhang,
Shunbin Wang,
Pengfei Wang,
Jonathan M. Ward,
Sile Nic Chormaic
Abstract:
We present a method for making microbubble whispering gallery resonators (WGRs) from tellurite, which is a soft glass, using a CO$_2$ laser. The customized fabrication process permits us to process glasses with low melting points into microbubbles with loaded quality factors as high as $2.3 \times 10^6$. The advantage of soft glasses is that they provide a wide range of refractive index, thermo-op…
▽ More
We present a method for making microbubble whispering gallery resonators (WGRs) from tellurite, which is a soft glass, using a CO$_2$ laser. The customized fabrication process permits us to process glasses with low melting points into microbubbles with loaded quality factors as high as $2.3 \times 10^6$. The advantage of soft glasses is that they provide a wide range of refractive index, thermo-optical and optomechanical properties. The temperature and air pressure dependent optical characteristics of both passive and active tellurite microbubbles are investigated. For passive tellurite microbubbles, the measured temperature and air pressure sensitivities are 4.9 GHz/K and 7.1 GHz/bar, respectively. The large thermal tuning rate is due to the large thermal expansion coefficient of $1.9 \times 10^{-5}$ K$^{-1}$ of the tellurite microbubble. In the active Yb$^{3+}$-Er$^{3+}$ co-doped tellurite microbubbles, C-band single-mode lasing with a threshold of 1.66 mW is observed with a 980 nm pump and a maximum wavelength tuning range of 1.53 nm is obtained. The sensitivity of the laser output frequency to pressure changes is 6.5 GHz/bar. The microbubbles fabricated by this novel method have a low eccentricity and uniform wall thickness, as determined from electron microscope images and the optical spectra. The compound glass microbubbles described herein have potential for a wide range of applications, including sensing, as tunable microcavity lasers, and for integrated photonics.
△ Less
Submitted 2 August, 2020;
originally announced August 2020.
-
Fabrication of Optical Nanofibre-Based Cavities using Focussed Ion-Beam Milling -- A Review
Authors:
Priscila Romagnoli,
Maki Maeda,
Jonathan M. Ward,
Viet Giang Truong,
Síle Nic Chormaic
Abstract:
Nanofibre-based optical cavities are particularly useful for quantum optics application, such as the development of integrated single-photon sources, and for studying fundamental light-matter interactions in cavity quantum electrodynamics (cQED). Although several techniques have been used to produce nanofibre-based optical cavities, focussed ion beam (FIB) milling is becoming popular; it can be us…
▽ More
Nanofibre-based optical cavities are particularly useful for quantum optics application, such as the development of integrated single-photon sources, and for studying fundamental light-matter interactions in cavity quantum electrodynamics (cQED). Although several techniques have been used to produce nanofibre-based optical cavities, focussed ion beam (FIB) milling is becoming popular; it can be used for the fabrication of complex structures directly in the nanofibre. This technique uses a highly accelerated ion beam to remove atoms from the target material with high resolution. However, it is challenging to mill insulating materials with highly-curved structures and large aspect ratios, such as silica nanofibres, due to charge accumulation in the material that leads to mechanical vibrations and misalignment issues. In this article, we highlight the main features of nanofibres and briefly review cQED with nanofibre-based optical cavities. An overview of the milling process is given with a summary of different FIB milled devices and their applications. Finally, we present our technique to produce nanofibre cavities by FIB milling. To overcome the aforementioned challenges, we present a specially designed base plate with an indium tin oxide (ITO)-coated Si substrate and outline our procedure, which improves stability during milling and increases repeatability.
△ Less
Submitted 22 January, 2020;
originally announced January 2020.
-
Enhanced Directional Coupling of Light with a Whispering Gallery Microcavity
Authors:
Fuchuan Lei,
Georgiy Tkachenko,
Xuefeng Jiang,
Jonathan M. Ward,
Lan Yang,
Síle Nic Chormaic
Abstract:
Directional coupling of light in nanophotonic circuits has recently attracted increasing interest, with numerous experimental realizations based on broken rotational or mirror symmetries of the light-matter system. The most prominent underlying effect is the spin-orbit interaction of light in subwavelength structures. Unfortunately, coupling of light to such structures is, in general, very ineffic…
▽ More
Directional coupling of light in nanophotonic circuits has recently attracted increasing interest, with numerous experimental realizations based on broken rotational or mirror symmetries of the light-matter system. The most prominent underlying effect is the spin-orbit interaction of light in subwavelength structures. Unfortunately, coupling of light to such structures is, in general, very inefficient. In this work, we experimentally demonstrate an order of magnitude enhancement of the directional coupling between two nanowaveguides by means of a whispering gallery microcavity. We also show that both transversmagnetic and transverse electric modes can be used for the enhancement.
△ Less
Submitted 16 January, 2020; v1 submitted 28 October, 2019;
originally announced October 2019.
-
Polarization-Controlled Cavity Input-Output Relations
Authors:
Fuchuan Lei,
Jonathan M. Ward,
Priscila Romagnoli,
Síle Nic Chormaic
Abstract:
Cavity input-output relations (CIORs) describe a universal formalism relating each of the far-field amplitudes outside the cavity to the internal cavity fields. Conventionally, they are derived based on a weak-scattering approximation. In this context, the amplitude of the off-resonant field remains nearly unaffected by the cavity, with the high coupling efficiency into cavity modes being attribut…
▽ More
Cavity input-output relations (CIORs) describe a universal formalism relating each of the far-field amplitudes outside the cavity to the internal cavity fields. Conventionally, they are derived based on a weak-scattering approximation. In this context, the amplitude of the off-resonant field remains nearly unaffected by the cavity, with the high coupling efficiency into cavity modes being attributed to destructive interference between the transmitted (or reflected) field and the output field from the cavity. In this Letter, we show that, in a whispering gallery resonator-waveguide coupled system, in the strong-scattering regime, the off-resonant field approaches to zero, but more than 90% coupling efficiency can still be achieved due to the Purcell-enhanced channeling. As a result, the CIORs turn out to be essentially different than in the weak-scattering regime. With this fact, we propose that the CIOR can be tailored by controlling the scattering strength. This is experimentally demonstrated by the transmission spectra exhibiting either bandstop or bandpass-type behavior according to the polarization of the input light field.
△ Less
Submitted 13 March, 2020; v1 submitted 10 September, 2019;
originally announced September 2019.
-
Complete polarization control for a nanofiber waveguide using directional coupling
Authors:
Fuchuan Lei,
Georgiy Tkachenko,
Jonathan M. Ward,
Síle Nic Chormaic
Abstract:
Optical nanofiber waveguides are widely used for near-field delivery and measurement of light. Despite their versatility and efficiency, nanofibers have a critical drawback - their inability to maintain light's polarization state on propagation. Here, we design a directional coupler consisting of two crossed nanofibers to probe the polarization state at the waist region. Directionality of coupling…
▽ More
Optical nanofiber waveguides are widely used for near-field delivery and measurement of light. Despite their versatility and efficiency, nanofibers have a critical drawback - their inability to maintain light's polarization state on propagation. Here, we design a directional coupler consisting of two crossed nanofibers to probe the polarization state at the waist region. Directionality of coupling occurs due to asymmetric dipolar emission or spin-locking when the evanescent field pattern breaks the mirror symmetry of the crossed-nanofiber system. We demonstrate that, by monitoring the outputs from the directional coupler, two non-orthogonal polarization states can be prepared at the nanofiber waist with a fidelity higher than 99%. Based on these states, we devise a simple and reliable method for complete control of the polarization along a nanofiber waveguide.
△ Less
Submitted 10 April, 2019;
originally announced April 2019.
-
Raman Laser Switching Induced by Cascaded Light Scattering
Authors:
Sho Kasumie,
Fuchuan Lei,
Jonathan M Ward,
Xuefeng Jiang,
Lan Yang,
Síle Nic Chormaic
Abstract:
We show that, in multimode Raman lasers, cascaded light scattering (CLS) not only extends the optical frequency range, but could also modulate the laser dynamics. The origin of this phenomenon is based on the fact that many Raman lasing modes are directly correlated through CLS. The coupled-mode equations only describe single-mode cascaded Raman lasers and are insufficient for describing the multi…
▽ More
We show that, in multimode Raman lasers, cascaded light scattering (CLS) not only extends the optical frequency range, but could also modulate the laser dynamics. The origin of this phenomenon is based on the fact that many Raman lasing modes are directly correlated through CLS. The coupled-mode equations only describe single-mode cascaded Raman lasers and are insufficient for describing the multimode case. In this work, we introduce additional terms to account for intermodal interaction and, thence, reveal the physical mechanism behind the mode-switching phenomenon. Additionally, mode-switching controlled solely by a single-mode pump in whispering gallery mode (WGM) silica Raman lasers is demonstrated. As the intracavity pump power is increased, laser switching happens between two adjacent WGMs in the same mode family.
△ Less
Submitted 15 September, 2019; v1 submitted 7 February, 2019;
originally announced February 2019.
-
Excitation of whispering gallery modes with a "point-and-play", fiber-based, optical nano-antenna
Authors:
Jonathan M. Ward,
Fuchuan Lei,
Stephy Vincent,
Pooja Gupta,
Samir K Mondal,
Jochen Fick,
Síle Nic Chormaic
Abstract:
We demonstrate the excitation and detection of whispering gallery modes in optical microresonators using a "point-and-play", fiber-based, optical nano-antenna. The coupling mechanism is based on cavity-enhanced Rayleigh scattering. Collected spectra exhibit Lorentzian dips, Fano shapes, or Lorentzian peaks, with a coupling efficiency around 13\%. The spectra are characterized by the coupling gap,…
▽ More
We demonstrate the excitation and detection of whispering gallery modes in optical microresonators using a "point-and-play", fiber-based, optical nano-antenna. The coupling mechanism is based on cavity-enhanced Rayleigh scattering. Collected spectra exhibit Lorentzian dips, Fano shapes, or Lorentzian peaks, with a coupling efficiency around 13\%. The spectra are characterized by the coupling gap, polarization, and fiber tip position. The coupling method is simple, low-cost and, most importantly, the \textit{Q}-factor can be maintained at $10^8$ over a wide coupling range, thereby making it suitable for metrology, sensing, or cavity quantum electrodynamics (cQED) experiments.
△ Less
Submitted 24 June, 2019; v1 submitted 5 January, 2019;
originally announced January 2019.
-
All-Optical Nanopositioning of High-Q Silica Microspheres
Authors:
Rafino M. J. Murphy,
Fuchuan Lei,
Jonathan M. Ward,
Yong Yang,
SÍle Nic Chormaic
Abstract:
A tunable, all-optical, coupling method has been realized for a high-\textit{Q} silica microsphere and an optical waveguide. By means of a novel optical nanopositioning method, induced thermal expansion of an asymmetric microsphere stem for laser powers up to 171~mW has been observed and used to fine tune the microsphere-waveguide coupling. Microcavity displacements ranging from (0.612~$\pm$~0.13)…
▽ More
A tunable, all-optical, coupling method has been realized for a high-\textit{Q} silica microsphere and an optical waveguide. By means of a novel optical nanopositioning method, induced thermal expansion of an asymmetric microsphere stem for laser powers up to 171~mW has been observed and used to fine tune the microsphere-waveguide coupling. Microcavity displacements ranging from (0.612~$\pm$~0.13) -- (1.5 $\pm$ 0.13) $μ$m and nanometer scale sensitivities varying from (2.81 $\pm$ 0.08) -- (7.39 $\pm$ 0.17) nm/mW, with an apparent linear dependency of coupling distance on stem laser heating, were obtained. Using this method, the coupling was altered such that different coupling regimes could be explored for particular samples. This tunable coupling method, in principle, could be incorporated into lab-on-a-chip microresonator systems, photonic molecule systems, and other nanopositioning frameworks.
△ Less
Submitted 23 March, 2017;
originally announced March 2017.
-
Bandpass transmission spectra of a whispering-gallery microcavity coupled to an ultrathin fiber
Authors:
Fuchuan Lei,
Rafino M. J. Murphy,
Jonathon M. Ward,
Yong Yang,
Sile Nic Chormaic
Abstract:
Tapered fibers with diameters ranging from 1-4 micron are widely used to excite the whispering-gallery (WG) modes of microcavities. Typically, the transmission spectrum of a WG cavity coupled to a waveguide around a resonance assumes a Lorentzian dip morphology due to resonant absorption of the light within the cavity. In this paper, we demonstrate that the transmission spectra of a WG cavity coup…
▽ More
Tapered fibers with diameters ranging from 1-4 micron are widely used to excite the whispering-gallery (WG) modes of microcavities. Typically, the transmission spectrum of a WG cavity coupled to a waveguide around a resonance assumes a Lorentzian dip morphology due to resonant absorption of the light within the cavity. In this paper, we demonstrate that the transmission spectra of a WG cavity coupled with an ultrathin fiber (500-700nm) may exhibit both Lorentzian dips and peaks, depending on the gap between the fiber and the microcavity. By considering the large scattering loss of off-resonant light from the fiber within the coupling region, this phenomenon can be attributed to partially resonant light bypassing the lossy scattering region via WG modes, allowing it to be coupled both to and from the cavity, thence manifesting as Lorentzian peaks within the transmission spectra, which implies the system could be implemented within a bandpass filter framework.
△ Less
Submitted 7 March, 2017;
originally announced March 2017.
-
Cavity ring-up spectroscopy for dissipative and dispersive sensing in a whispering gallery mode resonator
Authors:
Yong Yang,
Ramgopal Madugani,
Sho Kasumie,
Jonathan M. Ward,
Síle Nic Chormaic
Abstract:
In whispering gallery mode resonator sensing applications, the conventional way to detect a change in the parameter to be measured is by observing the steady state transmission spectrum through the coupling waveguide. Alternatively, cavity ring-up spectroscopy (CRUS) sensing can be achieved transiently. In this work, we investigate CRUS using coupled mode equations and find analytical solutions wi…
▽ More
In whispering gallery mode resonator sensing applications, the conventional way to detect a change in the parameter to be measured is by observing the steady state transmission spectrum through the coupling waveguide. Alternatively, cavity ring-up spectroscopy (CRUS) sensing can be achieved transiently. In this work, we investigate CRUS using coupled mode equations and find analytical solutions with a large spectral broadening approximation of the input pulse. The relationships between the frequency detuning, coupling gap and ring-up peak height are determined and experimentally verified using an ultrahigh \textit{Q}-factor silica microsphere. This work shows that distinctive dispersive and dissipative transient sensing can be realised by simply measuring the peak height of the CRUS signal, which might improve the data collection rate.
△ Less
Submitted 21 June, 2016;
originally announced June 2016.
-
Glass-on-Glass Fabrication of Bottle-Shaped Tunable Micro-Lasers and Their Applications
Authors:
Jonathan M. Ward,
Yong Yang,
Sile Nic Chormaic
Abstract:
We describe a novel method for making microbottle-shaped lasers by using a CO$_2$ laser to melt Er:Yb glass onto silica microcapillaries or fibres. This is realised by the fact that the two glasses have different melting points. The CO$_2$ laser power is controlled to flow the doped glass around the silica cylinder. In the case of a capillary, the resulting geometry is a hollow, microbottle-shaped…
▽ More
We describe a novel method for making microbottle-shaped lasers by using a CO$_2$ laser to melt Er:Yb glass onto silica microcapillaries or fibres. This is realised by the fact that the two glasses have different melting points. The CO$_2$ laser power is controlled to flow the doped glass around the silica cylinder. In the case of a capillary, the resulting geometry is a hollow, microbottle-shaped resonator. This is a simple method for fabricating a number of glass WGM lasers with a wide range of sizes on a single, micron-scale structure. The Er:Yb doped glass outer layer is pumped at 980 nm via a tapered optical fibre and whispering gallery mode (WGM) lasing is recorded around 1535 nm. This structure facilitates a new way to thermo-optically tune the microlaser modes by passing gas through the capillary. The cooling effect of the gas flow shifts the WGMs towards shorter wavelengths, thus thermal tuning of the lasing modes over 70 GHz is achieved. Results are fitted using the theory of hot wire anemometry, allowing the flow rate to be calibrated with a flow sensitivity as high as 100 GHz/sccm. Strain tuning of the microlaser modes by up to 50 GHz is also demonstrated.
△ Less
Submitted 20 January, 2016;
originally announced January 2016.
-
Linear Laser Tuning Using a Pressure-Sensitive Microbubble Resonator
Authors:
Ramgopal Madugani,
Yong Yang,
Vu H Le,
Jonathan M. Ward,
Síle Nic Chormaic
Abstract:
The tunability of an optical cavity is an essential requirement for many areas of research. Here, we use the Pound-Drever-Hall technique to lock a laser to a whispering gallery mode (WGM) of a microbubble resonator, to show that linear tuning of the WGM, and the corresponding locked laser, display almost zero hysteresis. By applying aerostatic pressure to the interior surface of the microbubble re…
▽ More
The tunability of an optical cavity is an essential requirement for many areas of research. Here, we use the Pound-Drever-Hall technique to lock a laser to a whispering gallery mode (WGM) of a microbubble resonator, to show that linear tuning of the WGM, and the corresponding locked laser, display almost zero hysteresis. By applying aerostatic pressure to the interior surface of the microbubble resonator, optical mode shift rates of around $58$ GHz/MPa are achieved. The microbubble can measure pressure with a detection limit of $2\times 10^{-4}$ MPa, which is an improvement made on pressure sensing using this device. The long-term frequency stability of this tuning method for different input pressures is measured. The frequency noise of the WGM measured over $10$ minutes for an input pressure of $0.5$ MPa, has a maximum standard deviation of $36$ MHz.
△ Less
Submitted 18 February, 2016; v1 submitted 16 November, 2015;
originally announced November 2015.
-
A high-Q, ultrathin-walled microbubble resonator for aerostatic pressure sensing
Authors:
Yong Yang,
Sunny Saurabh,
Jonathan M Ward,
Síle Nic Chormaic
Abstract:
Sensors based on whispering gallery resonators have minute footprints and can push achievable sensitivities and resolutions to their limits. Here, we use a microbubble resonator, with a wall thickness of 500 nm and an intrinsic Q-factor of $10^7$ in the telecommunications C-band, to investigate aerostatic pressure sensing via stress and strain of the material. The microbubble is made using two cou…
▽ More
Sensors based on whispering gallery resonators have minute footprints and can push achievable sensitivities and resolutions to their limits. Here, we use a microbubble resonator, with a wall thickness of 500 nm and an intrinsic Q-factor of $10^7$ in the telecommunications C-band, to investigate aerostatic pressure sensing via stress and strain of the material. The microbubble is made using two counter-propagating CO$_2$ laser beams focused onto a microcapillary. The measured sensitivity is 19 GHz/bar at 1.55 $μ$m. We show that this can be further improved to 38 GHz/bar when tested at the 780 nm wavelength range. In this case, the resolution for pressure sensing can reach 0.17 mbar with a Q-factor higher than $5\times10^7$.
△ Less
Submitted 6 January, 2016; v1 submitted 3 June, 2015;
originally announced June 2015.
-
Optomechanical Transduction and Characterization of a Silica Microsphere Pendulum via Evanescent Light
Authors:
Ramgopal Madugani,
Yong Yang,
Jonathan M Ward,
Vu H Le,
Síle Nic Chormaic
Abstract:
Dissipative optomechanics has some advantages in cooling compared to the conventional dispersion dominated systems. Here, we study the optical response of a cantilever-like, silica, microsphere pendulum, evanescently coupled to a fiber taper. In a whispering gallery mode resonator the cavity mode and motion of the pendulum result in both dispersive and dissipative optomechanical interactions. This…
▽ More
Dissipative optomechanics has some advantages in cooling compared to the conventional dispersion dominated systems. Here, we study the optical response of a cantilever-like, silica, microsphere pendulum, evanescently coupled to a fiber taper. In a whispering gallery mode resonator the cavity mode and motion of the pendulum result in both dispersive and dissipative optomechanical interactions. This unique mechanism leads to an experimentally observable, asymmetric response function of the transduction spectrum which can be explained using coupled-mode theory. The optomechanical transduction, and its relationship to the external coupling gap, are investigated and we show that the experimental behavior is in good agreement with the theoretical predictions. A deep understanding of this mechanism is necessary to explore trapping and cooling in dissipative optomechanical systems.
△ Less
Submitted 17 June, 2015; v1 submitted 19 January, 2015;
originally announced January 2015.
-
Hollow Core, Whispering Gallery Resonator Sensors
Authors:
Jonathan M. Ward,
Nitesh Dhasmana,
Síle Nic Chormaic
Abstract:
A review of hollow core whispering gallery resonators (WGRs)is given. After a short introduction to the topic of whispering gallery resonators we provide a description of whispering gallery modes in hollow or liquid core WGRs. Next, whispering gallery mode (WGM) sensing mechanisms are outlined and some fabrication methods for microbubbles, microcapillaries and other tubular WGM devices are discuss…
▽ More
A review of hollow core whispering gallery resonators (WGRs)is given. After a short introduction to the topic of whispering gallery resonators we provide a description of whispering gallery modes in hollow or liquid core WGRs. Next, whispering gallery mode (WGM) sensing mechanisms are outlined and some fabrication methods for microbubbles, microcapillaries and other tubular WGM devices are discussed. We then focus on the most common applications of hollow core WGRs, namely refractive index and temperature sensing, gas sensing, force sensing, biosensing, and lasing. The review highlights some of the key papers in this field and gives the reader a general overview of the current state-of-the-art.
△ Less
Submitted 19 August, 2014;
originally announced August 2014.
-
Optical Micro- and Nanofiber Pulling Rig
Authors:
J. M. Ward,
A. Maimaiti,
Vu H. Le,
S. Nic Chormaic
Abstract:
We review the method of producing adiabatic optical micro- and nanofibers using a hydrogen/oxygen flame brushing technique. The flame is scanned along the fiber, which is being simultaneously stretched by two translation stages. The tapered fiber fabrication is reproducible and yields highly adiabatic tapers with either exponential or linear profiles. Details regarding the setup of the flame brush…
▽ More
We review the method of producing adiabatic optical micro- and nanofibers using a hydrogen/oxygen flame brushing technique. The flame is scanned along the fiber, which is being simultaneously stretched by two translation stages. The tapered fiber fabrication is reproducible and yields highly adiabatic tapers with either exponential or linear profiles. Details regarding the setup of the flame brushing rig and the various parameters used are presented. Information available from the literature is compiled and further details that are necessary to have a functioning pulling rig are included. This should enable the reader to fabricate various taper profiles, while achieving adiabatic transmission of ~ 99% for fundamental mode propagation. Using this rig, transmissions ranging from 85-95% for higher order modes in an optical nanofiber have been obtained.
△ Less
Submitted 19 October, 2014; v1 submitted 25 February, 2014;
originally announced February 2014.
-
TeraHz tuning of whispering gallery modes in a PDMS, stand-alone, stretchable microsphere
Authors:
Ramgopal Madugani,
Yong Yang,
Jonathan M Ward,
John Daniel Riordan,
Sara Coppola,
Veronica Vespini,
Simonetta Grilli,
Andrea Finizio,
Pietro Ferraro,
Síle Nic Chormaic
Abstract:
We report on tuning the optical whispering gallery modes in a poly dimethyl siloxane-based (PDMS) microsphere resonator by more than a THz. The PDMS microsphere system consists of a solid spherical resonator directly formed with double stems on either side. The stems act like tie-rods for simple mechanical stretching of the microresonator over tens of microns, resulting in tuning of the whispering…
▽ More
We report on tuning the optical whispering gallery modes in a poly dimethyl siloxane-based (PDMS) microsphere resonator by more than a THz. The PDMS microsphere system consists of a solid spherical resonator directly formed with double stems on either side. The stems act like tie-rods for simple mechanical stretching of the microresonator over tens of microns, resulting in tuning of the whispering gallery modes by one free spectral range. Further investigations demonstrate that the whispering gallery mode shift has a higher sensitivity (0.13 nm/μN) to an applied force when the resonator is in its maximally stretched state compared to its relaxed state.
△ Less
Submitted 23 August, 2012;
originally announced August 2012.
-
Observation of Zeeman shift in the rubidium D2 line using an optical nanofiber in vapor
Authors:
Amy Watkins,
Vibhuti Bhushan Tiwari,
Jonathan M. Ward,
Síle Nic Chormaic
Abstract:
We report on the observation of a Zeeman shift (order of 100 MHz) of the Doppler-broadened D2 transition of both 85Rb and 87Rb isotopes via transmission through a tapered optical nanofiber in the presence of a DC magnetic field. Linearly-polarized light propagating in the nanofiber is analyzed as a superposition of two orthogonally circularly-polarized orientations, σ+ and σ-. In the absence of th…
▽ More
We report on the observation of a Zeeman shift (order of 100 MHz) of the Doppler-broadened D2 transition of both 85Rb and 87Rb isotopes via transmission through a tapered optical nanofiber in the presence of a DC magnetic field. Linearly-polarized light propagating in the nanofiber is analyzed as a superposition of two orthogonally circularly-polarized orientations, σ+ and σ-. In the absence of the magnetic field, the absorption of these polarizations by the atomic vapor, via the evanescent field at the waist of the nanofiber, is degenerate. When a weak magnetic field is applied parallel to the propagating light, this degeneracy is lifted and relative shifts in the resonance frequencies are detected. Typical linear shift rates of 1.6 MHz/G and -2.0 MHz/G were observed. We also demonstrate a dichroic atomic vapor laser lock line shape by monitoring the real-time subtraction of the two magnetically-shifted absorption spectra. This is particularly interesting for magneto-optical experiments as it could be directly implemented for diode laser frequency-stabilization.
△ Less
Submitted 19 May, 2013; v1 submitted 23 August, 2012;
originally announced August 2012.
-
The dynamical transition in proteins and non-Gaussian behavior of low frequency modes in Self Consistent Normal Mode Analysis
Authors:
Jianguang Guo,
Timo Budarz,
Joshua M. Ward,
Earl W. Prohofsky
Abstract:
Self Consistent Normal Mode Analysis (SCNMA) is applied to heme c type cytochrome f to study temperature dependent protein motion. Classical Normal Mode Analysis (NMA) assumes harmonic behavior and the protein Mean Square Displacement (MSD) has a linear dependence on temperature. This is only consistent with low temperature experimental results. To connect the protein vibrational motions between l…
▽ More
Self Consistent Normal Mode Analysis (SCNMA) is applied to heme c type cytochrome f to study temperature dependent protein motion. Classical Normal Mode Analysis (NMA) assumes harmonic behavior and the protein Mean Square Displacement (MSD) has a linear dependence on temperature. This is only consistent with low temperature experimental results. To connect the protein vibrational motions between low temperature and physiological temperature, we have incorporated a fitted set of anharmonic potentials into SCNMA. In addition, Quantum Harmonic Oscillator (QHO) theory has been used to calculate the displacement distribution for individual vibrational modes. We find that the modes involving soft bonds exhibit significant non-Gaussian dynamics at physiological temperature, which suggests it may be the cause of the non-Gaussian behavior of the protein motions probed by Elastic Incoherent Neutron Scattering (EINS). The combined theory displays a dynamical transition caused by the softening of few "torsional" modes in the low frequency regime (< 50cm-1or < 6meVor > 0.6ps). These modes change from Gaussian to a classical distribution upon heating. Our theory provides an alternative way to understand the microscopic origin of the protein dynamical transition.
△ Less
Submitted 26 May, 2010; v1 submitted 24 May, 2010;
originally announced May 2010.
-
Trapping of a microsphere pendulum resonator in an optical potential
Authors:
J. M. Ward,
Y. Wu,
V. G. Minogin,
S. Nic Chormaic
Abstract:
We propose a method to spatially confine or corral the movements of a micropendulum via the optical forces produced by two simultaneously excited optical modes of a photonic molecule comprising two microspherical cavities. We discuss how the cavity enhanced optical force generated in the photonic molecule can create an optomechanical potential of about 10 eV deep and 30 pm wide, which can be use…
▽ More
We propose a method to spatially confine or corral the movements of a micropendulum via the optical forces produced by two simultaneously excited optical modes of a photonic molecule comprising two microspherical cavities. We discuss how the cavity enhanced optical force generated in the photonic molecule can create an optomechanical potential of about 10 eV deep and 30 pm wide, which can be used to trap the pendulum at any given equilibrium position by a simple choice of laser frequencies. This result presents opportunities for very precise all-optical self-alignment of microsystems.
△ Less
Submitted 7 February, 2009; v1 submitted 16 November, 2008;
originally announced November 2008.
-
Optical bistability in Er-Yb co-doped phosphate glass microspheres at room temperature
Authors:
J. M. Ward,
D. G. O'Shea,
B. J. Shortt,
S. Nic Chormaic
Abstract:
We experimentally demonstrate optical bistability in Er3+-Yb3+ phosphate glass microspheres at 295 K. Bistability is associated with both Er3+ fluorescence and lasing behavior, and chromatic switching. The chromatic switching results from an intrinsic mechanism exploiting the thermal coupling of closely-spaced energy levels, and occurs simultaneously with the intensity switching. A contrast rati…
▽ More
We experimentally demonstrate optical bistability in Er3+-Yb3+ phosphate glass microspheres at 295 K. Bistability is associated with both Er3+ fluorescence and lasing behavior, and chromatic switching. The chromatic switching results from an intrinsic mechanism exploiting the thermal coupling of closely-spaced energy levels, and occurs simultaneously with the intensity switching. A contrast ratio of 3.2 has been obtained for chromatic switching, and the intensity switching shows ratios of 2.4 for 550 nm and, 1.8 for the 660 nm fluorescence emissions, and 11 for the IR lasing at 1.5 um. Concurrent with these observations, we investigate a temperature dependent absorption of pump power which exhibits bistable behavior. The influences of the host matrix on lasing and fluorescence mechanisms are highlighted.
△ Less
Submitted 16 February, 2007;
originally announced February 2007.
-
Upconversion channels in Er3+:ZBLALiP: multicolour microspherical light source
Authors:
Danny G. O'Shea,
Jonathan M. Ward,
Brian J. Shortt,
Michel Mortier,
Patrice Féron,
Síle Nic Chormaic
Abstract:
We present results on the realization of an all-taper coupled, multicolour microspherical glass light source fabricated from the erbium doped fluoride glass ZBLALiP. Whispering gallery mode lasing and upconversion processes give rise to laser and fluorescent emissions at multiple wavelengths from the ultraviolet to the infrared. A single-mode tapered fibre coupling scheme, which serves to both l…
▽ More
We present results on the realization of an all-taper coupled, multicolour microspherical glass light source fabricated from the erbium doped fluoride glass ZBLALiP. Whispering gallery mode lasing and upconversion processes give rise to laser and fluorescent emissions at multiple wavelengths from the ultraviolet to the infrared. A single-mode tapered fibre coupling scheme, which serves to both launch pump light at 980 nm into the microresonator cavity and collect the resulting infrared lasing, is employed. We demonstrate the use of a second separate fibre taper to outcouple the upconversion spectrum over several hundred nanometers. Thirteen discrete emissions ranging from 320 to 850 nm have been observed in the upconversion spectrum. The absorption and fluorescence properties are studied and the processes responsible for the generation of the observed wavelengths are outlined.
△ Less
Submitted 13 February, 2007; v1 submitted 21 November, 2006;
originally announced November 2006.
