-
Physics-Informed Neural Network for Parameter Identification: a Buck Converter Case Study
Authors:
Shuyu Ou,
Subham Sahoo,
Ariya Sangwongwanich,
Frede Blaabjerg,
Mahyar Hassanifar,
Martin Votava,
Marius Langwasser,
Marco Liserre
Abstract:
System-level condition monitoring methods estimate the electrical parameters of multiple components in a converter to assess their health status. The estimation accuracy and variation can differ significantly across parameters. For instance, inductance estimations are generally more accurate and stable than inductor resistance in a buck converter. However, these performance differences remain to b…
▽ More
System-level condition monitoring methods estimate the electrical parameters of multiple components in a converter to assess their health status. The estimation accuracy and variation can differ significantly across parameters. For instance, inductance estimations are generally more accurate and stable than inductor resistance in a buck converter. However, these performance differences remain to be analyzed with a more systematic approach otherwise the condition monitoring results can be unreliable. Therefore, this paper analyzes the training loss landscape against multiple parameters of a buck converter to provide a systematic explanation of different performances. If the training loss is high and smooth, the estimated circuit parameter typically is accurate and has low variation. Furthermore, a novel physics-informed neural network (PINN) is proposed, offering faster convergence and lower computation requirements compared to an existing PINN method. The proposed method is validated through simulations, where the loss landscape identifies the unreliable parameter estimations, and the PINN can estimate the remaining parameters.
△ Less
Submitted 29 April, 2025;
originally announced April 2025.
-
A Data-Driven Condition Monitoring Method for Capacitor in Modular Multilevel Converter (MMC)
Authors:
Shuyu Ou,
Mahyar Hassanifar,
Martin Votava,
Marius Langwasser,
Marco Liserre,
Ariya Sangwongwanich,
Subham Sahoo,
Frede Blaabjerg
Abstract:
The modular multilevel converter (MMC) is a topology that consists of a high number of capacitors, and degradation of capacitors can lead to converter malfunction, limiting the overall system lifetime. Condition monitoring methods can be applied to assess the health status of capacitors and realize predictive maintenance to improve reliability. Current research works for condition monitoring of ca…
▽ More
The modular multilevel converter (MMC) is a topology that consists of a high number of capacitors, and degradation of capacitors can lead to converter malfunction, limiting the overall system lifetime. Condition monitoring methods can be applied to assess the health status of capacitors and realize predictive maintenance to improve reliability. Current research works for condition monitoring of capacitors in an MMC mainly monitor either capacitance or equivalent series resistance (ESR), while these two health indicators can shift at different speeds and lead to different end-of-life times. Hence, monitoring only one of these parameters may lead to unreliable health status evaluation. This paper proposes a data-driven method to estimate capacitance and ESR at the same time, in which particle swarm optimization (PSO) is leveraged to update the obtained estimations. Then, the results of the estimations are used to predict the sub-module voltage, which is based on a capacitor voltage equation. Furthermore, minimizing the mean square error between the predicted and actual measured voltage makes the estimations closer to the actual values. The effectiveness and feasibility of the proposed method are validated through simulations and experiments.
△ Less
Submitted 20 April, 2024;
originally announced April 2024.
-
The U.S. CMS HL-LHC R&D Strategic Plan
Authors:
Oliver Gutsche,
Tulika Bose,
Margaret Votava,
David Mason,
Andrew Melo,
Mia Liu,
Dirk Hufnagel,
Lindsey Gray,
Mike Hildreth,
Burt Holzman,
Kevin Lannon,
Saba Sehrish,
David Sperka,
James Letts,
Lothar Bauerdick,
Kenneth Bloom
Abstract:
The HL-LHC run is anticipated to start at the end of this decade and will pose a significant challenge for the scale of the HEP software and computing infrastructure. The mission of the U.S. CMS Software & Computing Operations Program is to develop and operate the software and computing resources necessary to process CMS data expeditiously and to enable U.S. physicists to fully participate in the…
▽ More
The HL-LHC run is anticipated to start at the end of this decade and will pose a significant challenge for the scale of the HEP software and computing infrastructure. The mission of the U.S. CMS Software & Computing Operations Program is to develop and operate the software and computing resources necessary to process CMS data expeditiously and to enable U.S. physicists to fully participate in the physics of CMS. We have developed a strategic plan to prioritize R&D efforts to reach this goal for the HL-LHC. This plan includes four grand challenges: modernizing physics software and improving algorithms, building infrastructure for exabyte-scale datasets, transforming the scientific data analysis process and transitioning from R&D to operations. We are involved in a variety of R&D projects that fall within these grand challenges. In this talk, we will introduce our four grand challenges and outline the R&D program of the U.S. CMS Software & Computing Operations Program.
△ Less
Submitted 4 December, 2023; v1 submitted 1 December, 2023;
originally announced December 2023.
-
Flexible and Scalable Data-Acquisition Using the artdaq Toolkit
Authors:
Kurt Biery,
Eric Flumerfelt,
John Freeman,
Wesley Ketchum,
Gennadiy Lukhanin,
Adam Lyon,
Ron Rechenmacher,
Ryan Rivera,
Lorenzo Uplegger,
Margaret Votava
Abstract:
The Real-Time Systems Engineering Department of the Scientific Computing Division at Fermilab is developing a flexible, scalable, and powerful data-acquisition (DAQ) toolkit which serves the needs of experiments from bench-top hardware tests to large high-energy physics experiments. The toolkit provides data transport and event building capabilities with the option for experimenters to inject art…
▽ More
The Real-Time Systems Engineering Department of the Scientific Computing Division at Fermilab is developing a flexible, scalable, and powerful data-acquisition (DAQ) toolkit which serves the needs of experiments from bench-top hardware tests to large high-energy physics experiments. The toolkit provides data transport and event building capabilities with the option for experimenters to inject art analysis code at key points in the DAQ for filtering or monitoring. The toolkit also provides configuration management, run control, and low-level hardware communication utilities. Firmware blocks for several commercial data acquisition boards are provided, allowing experimenters to approach the DAQ from a high level. A fully-functional DAQ "solution" of the toolkit is provided in otsdaq, sacrificing some flexibility in favor of being ready-to-use. artdaq is being used for several current and upcoming experiments, and will continue to be refined and expanded for use in the next generation of neutrino and muon experiments.
△ Less
Submitted 19 June, 2018;
originally announced June 2018.
-
The Fermilab Test Beam Facility Data Acquisition System Based on otsdaq
Authors:
Kurt Biery,
Eric Flumerfelt,
Adam Lyon,
Ron Rechenmacher,
Ryan Rivera,
Mandy Rominsky,
Lorenzo Uplegger,
Margaret Votava
Abstract:
The Real-Time Systems Engineering Department of the Scientific Computing Division at Fermilab has deployed set of customizations to our Off-The-Shelf Data Acquisition solution (otsdaq) at the Fermilab Test Beam Facility (FTBF) to read out the beamline instrumentation in support of FTBF users. In addition to reading out several detectors which use various detection technologies and readout hardware…
▽ More
The Real-Time Systems Engineering Department of the Scientific Computing Division at Fermilab has deployed set of customizations to our Off-The-Shelf Data Acquisition solution (otsdaq) at the Fermilab Test Beam Facility (FTBF) to read out the beamline instrumentation in support of FTBF users. In addition to reading out several detectors which use various detection technologies and readout hardware, the FTBF Data Acquisition system (DAQ) can perform basic track reconstruction through the facility in real time and provide data to facility users. An advanced prototype smart coincidence module, known as the NIM+, performs trigger distribution and throttling, allowing the beamline instrumentation to be read out at different rates. Spill data are saved to disk for studies of the facility performance, and hit data are also made available on the FTBF network for experiments' use. A web-based run control and configuration GUI are provided, and the online monitoring snapshots created after each beam spill are viewable from any computer connected to the Fermilab network. The integrated DAQ system for the facility provides users with high-precision tracking data along the beamline and a single location for obtaining data from the facility detectors, which set the baseline for testing their own detectors.
△ Less
Submitted 19 June, 2018;
originally announced June 2018.
-
A Roadmap for HEP Software and Computing R&D for the 2020s
Authors:
Johannes Albrecht,
Antonio Augusto Alves Jr,
Guilherme Amadio,
Giuseppe Andronico,
Nguyen Anh-Ky,
Laurent Aphecetche,
John Apostolakis,
Makoto Asai,
Luca Atzori,
Marian Babik,
Giuseppe Bagliesi,
Marilena Bandieramonte,
Sunanda Banerjee,
Martin Barisits,
Lothar A. T. Bauerdick,
Stefano Belforte,
Douglas Benjamin,
Catrin Bernius,
Wahid Bhimji,
Riccardo Maria Bianchi,
Ian Bird,
Catherine Biscarat,
Jakob Blomer,
Kenneth Bloom,
Tommaso Boccali
, et al. (285 additional authors not shown)
Abstract:
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for…
▽ More
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade.
△ Less
Submitted 19 December, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
Tevatron Beam Position Monitor Upgrade
Authors:
G. Annala,
B. Banerjee,
B. Barker,
T. Boes,
M. Bowden,
C. Briegel,
G. Cancelo,
G. Duerling,
B. Forster,
S. Foulkes,
B. Haynes,
B. Hendricks,
T. Kasza,
R. Kutschke,
R. Mahlum,
M. Martens,
M. Olson,
V. Pavlicek,
L. Piccoli,
P. Prieto,
J. Steimel,
K. Treptow,
M. Votava,
D. Voy,
M. Wendt
, et al. (2 additional authors not shown)
Abstract:
This paper describes the development of a digital-based Beam Position System which was designed, developed, and adapted for the Tevatron during Collider Run II.
This paper describes the development of a digital-based Beam Position System which was designed, developed, and adapted for the Tevatron during Collider Run II.
△ Less
Submitted 26 September, 2012;
originally announced September 2012.
-
Status Report of the DPHEP Study Group: Towards a Global Effort for Sustainable Data Preservation in High Energy Physics
Authors:
Z. Akopov,
Silvia Amerio,
David Asner,
Eduard Avetisyan,
Olof Barring,
James Beacham,
Matthew Bellis,
Gregorio Bernardi,
Siegfried Bethke,
Amber Boehnlein,
Travis Brooks,
Thomas Browder,
Rene Brun,
Concetta Cartaro,
Marco Cattaneo,
Gang Chen,
David Corney,
Kyle Cranmer,
Ray Culbertson,
Sunje Dallmeier-Tiessen,
Dmitri Denisov,
Cristinel Diaconu,
Vitaliy Dodonov,
Tony Doyle,
Gregory Dubois-Felsmann
, et al. (65 additional authors not shown)
Abstract:
Data from high-energy physics (HEP) experiments are collected with significant financial and human effort and are mostly unique. An inter-experimental study group on HEP data preservation and long-term analysis was convened as a panel of the International Committee for Future Accelerators (ICFA). The group was formed by large collider-based experiments and investigated the technical and organisati…
▽ More
Data from high-energy physics (HEP) experiments are collected with significant financial and human effort and are mostly unique. An inter-experimental study group on HEP data preservation and long-term analysis was convened as a panel of the International Committee for Future Accelerators (ICFA). The group was formed by large collider-based experiments and investigated the technical and organisational aspects of HEP data preservation. An intermediate report was released in November 2009 addressing the general issues of data preservation in HEP. This paper includes and extends the intermediate report. It provides an analysis of the research case for data preservation and a detailed description of the various projects at experiment, laboratory and international levels. In addition, the paper provides a concrete proposal for an international organisation in charge of the data management and policies in high-energy physics.
△ Less
Submitted 21 May, 2012;
originally announced May 2012.
-
Adapting SAM for CDF
Authors:
D. Bonham,
G. Garzoglio,
R. Herber,
J. Kowalkowski,
D. Litvintsev,
L. Lueking,
M. Paterno,
D. Petravick,
L. Piccoli,
R. Pordes,
N. Stanfield,
I. Terekhov,
J. Trumbo,
J. Tseng,
S. Veseli,
M. Votava,
V. White,
T. Huffman,
S. Stonjek,
K. Waltkins,
P. Crosby,
D. Waters,
R. St. Denis
Abstract:
The CDF and D0 experiments probe the high-energy frontier and as they do so have accumulated hundreds of Terabytes of data on the way to petabytes of data over the next two years. The experiments have made a commitment to use the developing Grid based on the SAM system to handle these data. The D0 SAM has been extended for use in CDF as common patterns of design emerged to meet the similar requi…
▽ More
The CDF and D0 experiments probe the high-energy frontier and as they do so have accumulated hundreds of Terabytes of data on the way to petabytes of data over the next two years. The experiments have made a commitment to use the developing Grid based on the SAM system to handle these data. The D0 SAM has been extended for use in CDF as common patterns of design emerged to meet the similar requirements of these experiments. The process by which the merger was achieved is explained with particular emphasis on lessons learned concerning the database design patterns plus realization of the use cases.
△ Less
Submitted 18 June, 2003;
originally announced June 2003.
