Showing 1–50 of 83 results for author: Vogt, M

Jupiter's UV auroral response to a magnetospheric compression event

Authors: R. S. Giles, T. K. Greathouse, R. W. Ebert, W. S. Kurth, C. K. Louis, M. F. Vogt, B. Bonfond, D. Grodent, J. -C. Gérard, G. R. Gladstone, J. A. Kammer, V. Hue, R. J. Wilson, S. J. Bolton, J. E. P. Connerney

Abstract: The highly elliptical polar orbit of the Juno mission provides a unique opportunity to simultaneously measure the compression state of Jupiter's magnetosphere and the total power emitted by the planet's ultraviolet aurora, using a single spacecraft. This allows us to study how Jupiter's aurora respond to a compression event. In this paper, we present a case study of an extreme compression event th… ▽ More The highly elliptical polar orbit of the Juno mission provides a unique opportunity to simultaneously measure the compression state of Jupiter's magnetosphere and the total power emitted by the planet's ultraviolet aurora, using a single spacecraft. This allows us to study how Jupiter's aurora respond to a compression event. In this paper, we present a case study of an extreme compression event that occurred on December 6-7 2022 when Juno was a distance of 70 R$_{J}$ from Jupiter. This extreme compression was accompanied by a very large increase in the ultraviolet auroral emissions to 12 TW, a factor of six higher than the baseline level. This event coincided with the predicted arrival of a powerful interplanetary shock, which was expected to cause the largest increase in the solar wind dynamic pressure seen thus far during the Juno mission. The simultaneous occurrence of the interplanetary shock, the extreme compression and the bright ultraviolet aurora suggests that in this case, the auroral brightening was caused by the solar wind shock compressing the magnetosphere. △ Less

Submitted 26 May, 2025; originally announced May 2025.

Comments: Accepted in JGR: Planets

High-endurance mechanical switching in a DNA origami snap-through mechanism

Authors: Florian Rothfischer, Lennart J. K. Weiß, Niccolò Tedeschi, Michael Matthies, Matthias Vogt, Christoph Karfusehr, Alexander Hebel, Petr Šulc, Tim Liedl, Enzo Kopperger, Friedrich C. Simmel

Abstract: Switchable elements are key components of dynamic technological and biological systems, enabling reversible transitions between well-defined states. Here, we present a DNA origami-based, mechanically bistable snap-through mechanism that can be electrically controlled. This nanoscale switch exhibits long-term stability in both states in the absence of external stimuli, while achieving millisecond-s… ▽ More Switchable elements are key components of dynamic technological and biological systems, enabling reversible transitions between well-defined states. Here, we present a DNA origami-based, mechanically bistable snap-through mechanism that can be electrically controlled. This nanoscale switch exhibits long-term stability in both states in the absence of external stimuli, while achieving millisecond-scale switching times upon application of an electric field. Individual devices sustain hundreds of thousands of switching cycles over several hours, offering a powerful platform for systematically studying the endurance and failure mechanisms of biomolecular nanoswitches. Functionalization with a gold nanorod further allows polarization-dependent optical modulation, opening avenues for applications in plasmonics. This versatile electromechanical interface has potential uses in molecular information processing, optical nanodevices, and the dynamic control of chemical reactions. △ Less

Submitted 15 May, 2025; originally announced May 2025.

Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, A. Abada , et al. (1439 additional authors not shown)

Abstract: In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;… ▽ More In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase. FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible. FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes. This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 627 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0004

Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I… ▽ More Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region. The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 357 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0003

Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.… ▽ More Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 290 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-PHYS-2025-0002

Jupiter's ultraviolet auroral bridge: the influence of the solar wind on polar auroral morphology

Authors: L. A. Head, D. Grodent, B. Bonfond, A. Sulaiman, A. Moirano, G. Sicorello, S. Elliott, M. F. Vogt, C. K. Louis, N. Kruegler, J. Vinesse

Abstract: Jupiter's ultraviolet aurora frequently shows a number of arcs between the dusk-side polar region and the main emission, which are denoted as ``bridges''. This work presents a largely automated detection and statistical analysis of bridges over 248 Hubble-Space-Telescope observations, alongside a multi-instrument study of crossings of magnetic field lines connected to bridges by the Juno spacecraf… ▽ More Jupiter's ultraviolet aurora frequently shows a number of arcs between the dusk-side polar region and the main emission, which are denoted as ``bridges''. This work presents a largely automated detection and statistical analysis of bridges over 248 Hubble-Space-Telescope observations, alongside a multi-instrument study of crossings of magnetic field lines connected to bridges by the Juno spacecraft during its first 30 perijoves. Bridges are observed to arise on timescales of $\sim$2 hours, can persist over a full Jupiter rotation, and are conjugate between hemispheres. The appearance of bridges is strongly associated with compression of the magnetosphere by the solar wind. Low-altitude bridge crossings are associated with upward-dominated, broadband electron distributions, consistent with Zone-II aurorae, as well as with plasma-wave bursts observed by Juno-Waves, in agreement with existing theoretical models for the generation of polar-region aurorae. Electron populations associated with crossings of field lines threading the main emission by Juno also become more downward-dominated when separate bridges are present in the nearby aurora. In all, this indicates that bridges are likely Zone-II aurorae that have become spatially separated from the Zone-I aurorae under the influence of the solar wind. △ Less

Submitted 25 March, 2025; originally announced April 2025.

ORCA: An Open-Source, Reliable, Cost-Effective, Anthropomorphic Robotic Hand for Uninterrupted Dexterous Task Learning

Authors: Clemens C. Christoph, Maximilian Eberlein, Filippos Katsimalis, Arturo Roberti, Aristotelis Sympetheros, Michel R. Vogt, Davide Liconti, Chenyu Yang, Barnabas Gavin Cangan, Ronan J. Hinchet, Robert K. Katzschmann

Abstract: General-purpose robots should possess humanlike dexterity and agility to perform tasks with the same versatility as us. A human-like form factor further enables the use of vast datasets of human-hand interactions. However, the primary bottleneck in dexterous manipulation lies not only in software but arguably even more in hardware. Robotic hands that approach human capabilities are often prohibiti… ▽ More General-purpose robots should possess humanlike dexterity and agility to perform tasks with the same versatility as us. A human-like form factor further enables the use of vast datasets of human-hand interactions. However, the primary bottleneck in dexterous manipulation lies not only in software but arguably even more in hardware. Robotic hands that approach human capabilities are often prohibitively expensive, bulky, or require enterprise-level maintenance, limiting their accessibility for broader research and practical applications. What if the research community could get started with reliable dexterous hands within a day? We present the open-source ORCA hand, a reliable and anthropomorphic 17-DoF tendon-driven robotic hand with integrated tactile sensors, fully assembled in less than eight hours and built for a material cost below 2,000 CHF. We showcase ORCA's key design features such as popping joints, auto-calibration, and tensioning systems that significantly reduce complexity while increasing reliability, accuracy, and robustness. We benchmark the ORCA hand across a variety of tasks, ranging from teleoperation and imitation learning to zero-shot sim-to-real reinforcement learning. Furthermore, we demonstrate its durability, withstanding more than 10,000 continuous operation cycles - equivalent to approximately 20 hours - without hardware failure, the only constraint being the duration of the experiment itself. All design files, source code, and documentation will be available at https://www.orcahand.com/. △ Less

Submitted 5 April, 2025; originally announced April 2025.

Comments: This work has been submitted to the IEEE for possible publication

New Models of Jupiter's Magnetopause and Bow Shock through the Juno Prime Mission: Probabilistic Location, Shape, and Internally-driven Variation

Authors: M. J. Rutala, C. M. Jackman, C. K. Louis, A. R. Azari, F. Bagenal, S. P. Joy, W. S. Kurth, T. B. Keebler, R. S. Giles, R. W. Ebert, C. F. Bowers, M. F. Vogt

Abstract: The interaction between Jupiter's magnetosphere and the solar wind is not well-constrained: while internal energetic plasma processes are thought to dominate plasma circulation, the solar wind nonetheless exerts significant control over the shape and scale of the whole structure. To better constrain this interaction, we derive new functional forms for Jupiter's magnetopause and bow shock using dat… ▽ More The interaction between Jupiter's magnetosphere and the solar wind is not well-constrained: while internal energetic plasma processes are thought to dominate plasma circulation, the solar wind nonetheless exerts significant control over the shape and scale of the whole structure. To better constrain this interaction, we derive new functional forms for Jupiter's magnetopause and bow shock using data from the $Ulysses$, Galileo, Cassini, and Juno missions and calibrated solar wind estimates from the Multi-Model Ensemble System for the Heliosphere (MMESH). We design an empirical Bayesian model to estimate the locations of the boundaries using a Markov-chain Monte Carlo (MCMC) algorithm, expanding our model to sample all times, not only boundary crossing events. The boundary surfaces which best describe the data are thus estimated without the need for a full, physics-based magnetohydrodynamic (MHD) treatment of the Jovian magnetosphere and the additional assumptions required for such. The new magnetopause model exhibits significant polar flattening and dawn-dusk asymmetry, and includes a narrowing of the magnetotail when compared to previous models. The new bow shock model is largely axisymmetric. Both boundary models describe surfaces which lie closer to Jupiter than previous models, which has important implications for the modern picture of Jupiter's dynamic magnetosphere and the expected science results of current and upcoming Jupiter-bound spacecraft. Applying these models to Juno's trajectory, we estimate that the spacecraft should be expected to spend ${\sim}19\%$ of each orbit in the magnetosheath and ${\sim}4\%$ of each orbit in the solar wind starting from Perijove 64 (PJ64, 21 July 2021). △ Less

Submitted 27 February, 2025; v1 submitted 13 February, 2025; originally announced February 2025.

Comments: 34 pages, 11 figures

Harnessing Machine Learning for Single-Shot Measurement of Free Electron Laser Pulse Power

Authors: Till Korten, Vladimir Rybnikov, Mathias Vogt, Juliane Roensch-Schulenburg, Peter Steinbach, Najmeh Mirian

Abstract: Electron beam accelerators are essential in many scientific and technological fields. Their operation relies heavily on the stability and precision of the electron beam. Traditional diagnostic techniques encounter difficulties in addressing the complex and dynamic nature of electron beams. Particularly in the context of free-electron lasers (FELs), it is fundamentally impossible to measure the las… ▽ More Electron beam accelerators are essential in many scientific and technological fields. Their operation relies heavily on the stability and precision of the electron beam. Traditional diagnostic techniques encounter difficulties in addressing the complex and dynamic nature of electron beams. Particularly in the context of free-electron lasers (FELs), it is fundamentally impossible to measure the lasing-on and lasingoff electron power profiles for a single electron bunch. This is a crucial hurdle in the exact reconstruction of the photon pulse profile. To overcome this hurdle, we developed a machine learning model that predicts the temporal power profile of the electron bunch in the lasing-off regime using machine parameters that can be obtained when lasing is on. The model was statistically validated and showed superior predictions compared to the state-of-the-art batch calibrations. The work we present here is a critical element for a virtual pulse reconstruction diagnostic (VPRD) tool designed to reconstruct the power profile of individual photon pulses without requiring repeated measurements in the lasing-off regime. This promises to significantly enhance the diagnostic capabilities in FELs at large. △ Less

Submitted 15 November, 2024; v1 submitted 14 November, 2024; originally announced November 2024.

Comments: 10 pages, 4 figures, Machine Learning and the Physical Sciences Workshop, NeurIPS 2024 https://neurips.cc/virtual/2024/100009

SRF programs towards High-Q/High-G cavities in IJCLab

Authors: Akira Miyazaki, Mohammed Fouaidy, Nicolas Gandolfo, David Longuevergne, Guillaume Olry, Mael Vannson, Lê My Vogt, Matthieu Baudrier, Enrico Cenni, Fabien Eozénou, Grégoire Jullien, Luc Maurice

Abstract: IJCLab has been leading the development and deployment of low-$β$ Superconducting Radio Frequency (SRF) cavities for proton and heavy ion accelerators. We are launching an electron accelerator project for sustainable Energy Recovery Linac (iSAS/PERLE) with state-of-the-art SRF cavities at 800~MHz. Our proposal includes advanced heat treatment of such cavities to reach an excellent quality factor o… ▽ More IJCLab has been leading the development and deployment of low-$β$ Superconducting Radio Frequency (SRF) cavities for proton and heavy ion accelerators. We are launching an electron accelerator project for sustainable Energy Recovery Linac (iSAS/PERLE) with state-of-the-art SRF cavities at 800~MHz. Our proposal includes advanced heat treatment of such cavities to reach an excellent quality factor of $3\times 10^{10}$ at $22$~MV/m. In this paper, we overview the status of this activity. △ Less

Submitted 13 November, 2024; v1 submitted 1 October, 2024; originally announced October 2024.

Comments: Contribution to LCWS2024 proceedings

Constraints on $f(R)$ gravity from tSZE-selected SPT galaxy clusters and weak lensing mass calibration from DES and HST

Authors: S. M. L. Vogt, S. Bocquet, C. T. Davies, J. J. Mohr, F. Schmidt, C. -Z. Ruan, B. Li, C. Hernández-Aguayo, S. Grandis, L. E. Bleem, M. Klein, T. Schrabback, M. Aguena, D. Brooks, D. L. Burke, A. Campos, A. Carnero Rosell, J. Carretero, M. Costanzi, L. N. da Costa, M. E. S. Pereira, J. De Vicente, P. Doel, S. Everett, I. Ferrero , et al. (30 additional authors not shown)

Abstract: We present constraints on the $f(R)$ gravity model using a sample of 1,005 galaxy clusters in the redshift range $0.25 - 1.78$ that have been selected through the thermal Sunyaev-Zel'dovich effect (tSZE) from South Pole Telescope (SPT) data and subjected to optical and near-infrared confirmation with the Multi-component Matched Filter (MCMF) algorithm. We employ weak gravitational lensing mass cal… ▽ More We present constraints on the $f(R)$ gravity model using a sample of 1,005 galaxy clusters in the redshift range $0.25 - 1.78$ that have been selected through the thermal Sunyaev-Zel'dovich effect (tSZE) from South Pole Telescope (SPT) data and subjected to optical and near-infrared confirmation with the Multi-component Matched Filter (MCMF) algorithm. We employ weak gravitational lensing mass calibration from the Dark Energy Survey (DES) Year 3 data for 688 clusters at $z < 0.95$ and from the Hubble Space Telescope (HST) for 39 clusters with $0.6 < z < 1.7$. Our cluster sample is a powerful probe of $f(R)$ gravity, because this model predicts a scale-dependent enhancement in the growth of structure, which impacts the halo mass function (HMF) at cluster mass scales. To account for these modified gravity effects on the HMF, our analysis employs a semi-analytical approach calibrated with numerical simulations. Combining calibrated cluster counts with primary cosmic microwave background (CMB) temperature and polarization anisotropy measurements from the Planck2018 release, we derive robust constraints on the $f(R)$ parameter $f_{R0}$. Our results, $\log_{10} |f_{R0}| < -5.32$ at the 95 % credible level, are the tightest current constraints on $f(R)$ gravity from cosmological scales. This upper limit rules out $f(R)$-like deviations from general relativity that result in more than a $\sim$20 % enhancement of the cluster population on mass scales $M_\mathrm{200c}>3\times10^{14}M_\odot$. △ Less

Submitted 11 February, 2025; v1 submitted 20 September, 2024; originally announced September 2024.

Comments: 21 pages, 6 figures, published in Phys. Rev. D

Journal ref: Sophie M. L. Vogt et al., Phys. Rev. D 111, 043519 (2025)

Piecewise Constant Hazard Estimation with the Fused Lasso

Authors: Manuel Rosenbaum, Jan Beyersmann, Michael Vogt

Abstract: In applied time-to-event analysis, a flexible parametric approach is to model the hazard rate as a piecewise constant function of time. However, the change points and values of the piecewise constant hazard are usually unknown and need to be estimated. In this paper, we develop a fully data-driven procedure for piecewise constant hazard estimation. We work in a general counting process framework w… ▽ More In applied time-to-event analysis, a flexible parametric approach is to model the hazard rate as a piecewise constant function of time. However, the change points and values of the piecewise constant hazard are usually unknown and need to be estimated. In this paper, we develop a fully data-driven procedure for piecewise constant hazard estimation. We work in a general counting process framework which nests a wide range of popular models in time-to-event analysis including Cox's proportional hazards model with potentially high-dimensional covariates, competing risks models as well as more general multi-state models. To construct our estimator, we set up a regression model for the increments of the Breslow estimator and then use fused lasso techniques to approximate the piecewise constant signal in this regression model. In the theoretical part of the paper, we derive the convergence rate of our estimator as well as some results on how well the change points of the piecewise constant hazard are approximated by our method. We complement the theory by both simulations and a real data example, illustrating that our results apply in rather general event histories such as multi-state models. △ Less

Submitted 7 August, 2024; originally announced August 2024.

FlexKalmanNet: A Modular AI-Enhanced Kalman Filter Framework Applied to Spacecraft Motion Estimation

Authors: Moritz D. Pinheiro-Torres Vogt, Markus Huwald, M. Khalil Ben-Larbi, Enrico Stoll

Abstract: The estimation of relative motion between spacecraft increasingly relies on feature-matching computer vision, which feeds data into a recursive filtering algorithm. Kalman filters, although efficient in noise compensation, demand extensive tuning of system and noise models. This paper introduces FlexKalmanNet, a novel modular framework that bridges this gap by integrating a deep fully connected ne… ▽ More The estimation of relative motion between spacecraft increasingly relies on feature-matching computer vision, which feeds data into a recursive filtering algorithm. Kalman filters, although efficient in noise compensation, demand extensive tuning of system and noise models. This paper introduces FlexKalmanNet, a novel modular framework that bridges this gap by integrating a deep fully connected neural network with Kalman filter-based motion estimation algorithms. FlexKalmanNet's core innovation is its ability to learn any Kalman filter parameter directly from measurement data, coupled with the flexibility to utilize various Kalman filter variants. This is achieved through a notable design decision to outsource the sequential computation from the neural network to the Kalman filter variant, enabling a purely feedforward neural network architecture. This architecture, proficient at handling complex, nonlinear features without the dependency on recurrent network modules, captures global data patterns more effectively. Empirical evaluation using data from NASA's Astrobee simulation environment focuses on learning unknown parameters of an Extended Kalman filter for spacecraft pose and twist estimation. The results demonstrate FlexKalmanNet's rapid training convergence, high accuracy, and superior performance against manually tuned Extended Kalman filters. △ Less

Submitted 5 May, 2024; originally announced May 2024.

Self-Sensing Feedback Control of an Electrohydraulic Robotic Shoulder

Authors: Clemens C. Christoph, Amirhossein Kazemipour, Michel R. Vogt, Yu Zhang, Robert K. Katzschmann

Abstract: The human shoulder, with its glenohumeral joint, tendons, ligaments, and muscles, allows for the execution of complex tasks with precision and efficiency. However, current robotic shoulder designs lack the compliance and compactness inherent in their biological counterparts. A major limitation of these designs is their reliance on external sensors like rotary encoders, which restrict mechanical jo… ▽ More The human shoulder, with its glenohumeral joint, tendons, ligaments, and muscles, allows for the execution of complex tasks with precision and efficiency. However, current robotic shoulder designs lack the compliance and compactness inherent in their biological counterparts. A major limitation of these designs is their reliance on external sensors like rotary encoders, which restrict mechanical joint design and introduce bulk to the system. To address this constraint, we present a bio-inspired antagonistic robotic shoulder with two degrees of freedom powered by self-sensing hydraulically amplified self-healing electrostatic actuators. Our artificial muscle design decouples the high-voltage electrostatic actuation from the pair of low-voltage self-sensing electrodes. This approach allows for proprioceptive feedback control of trajectories in the task space while eliminating the necessity for any additional sensors. We assess the platform's efficacy by comparing it to a feedback control based on position data provided by a motion capture system. The study demonstrates closed-loop controllable robotic manipulators based on an inherent self-sensing capability of electrohydraulic actuators. The proposed architecture can serve as a basis for complex musculoskeletal joint arrangements. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Comments: 7 pages, 8 figures

Journal ref: 2024 IEEE International Conference on Robotics and Automation (ICRA)

High-Frequency Capacitive Sensing for Electrohydraulic Soft Actuators

Authors: Michel R. Vogt, Maximilian Eberlein, Clemens C. Christoph, Felix Baumann, Fabrice Bourquin, Wim Wende, Fabio Schaub, Amirhossein Kazemipour, Robert K. Katzschmann

Abstract: The need for compliant and proprioceptive actuators has grown more evident in pursuing more adaptable and versatile robotic systems. Hydraulically Amplified Self-Healing Electrostatic (HASEL) actuators offer distinctive advantages with their inherent softness and flexibility, making them promising candidates for various robotic tasks, including delicate interactions with humans and animals, biomim… ▽ More The need for compliant and proprioceptive actuators has grown more evident in pursuing more adaptable and versatile robotic systems. Hydraulically Amplified Self-Healing Electrostatic (HASEL) actuators offer distinctive advantages with their inherent softness and flexibility, making them promising candidates for various robotic tasks, including delicate interactions with humans and animals, biomimetic locomotion, prosthetics, and exoskeletons. This has resulted in a growing interest in the capacitive self-sensing capabilities of HASEL actuators to create miniature displacement estimation circuitry that does not require external sensors. However, achieving HASEL self-sensing for actuation frequencies above 1 Hz and with miniature high-voltage power supplies has remained limited. In this paper, we introduce the F-HASEL actuator, which adds an additional electrode pair used exclusively for capacitive sensing to a Peano-HASEL actuator. We demonstrate displacement estimation of the F-HASEL during high-frequency actuation up to 20 Hz and during external loading using miniaturized circuitry comprised of low-cost off-the-shelf components and a miniature high-voltage power supply. Finally, we propose a circuitry to estimate the displacement of multiple F-HASELs and demonstrate it in a wearable application to track joint rotations of a virtual reality user in real-time. △ Less

Submitted 8 April, 2024; v1 submitted 5 April, 2024; originally announced April 2024.

Comments: This work has been submitted to the IEEE for possible publication

Effect of magnetospheric conditions on the morphology of Jupiter's UV main auroral emission, as observed by Juno-UVS

Authors: L. A. Head, D. Grodent, B. Bonfond, A. Moirano, B. Benmahi, G. Sicorello, J-C Gérard, M. F. Vogt, V. Hue, T. Greathouse, G. R. Gladstone, Z. Yao

Abstract: Auroral emissions are a reflection of magnetospheric processes, and, at Jupiter, it is not entirely certain how the morphology of the UV main emission (ME) varies with magnetospheric compression or the strength of the central current sheet. This work leverages the observations from Juno-UVS to link ME variability with magnetospheric states. Novel arc-detection techniques are used to determine new… ▽ More Auroral emissions are a reflection of magnetospheric processes, and, at Jupiter, it is not entirely certain how the morphology of the UV main emission (ME) varies with magnetospheric compression or the strength of the central current sheet. This work leverages the observations from Juno-UVS to link ME variability with magnetospheric states. Novel arc-detection techniques are used to determine new reference ovals for the ME from perijoves 1 through 54, in both hemispheres, and analyse how the size and shape of the ME vary compared to this reference oval. The morphology and brightness of the ME vary in local time: the dawn-side ME is typically expanded and the dusk-side ME typically contracted compared to the reference oval, and the dusk-side ME being typically twice as bright as the dawn-side ME. Both the northern and southern ME, and the day-side and night-side ME, expand and contract from their reference ovals synchronously, which indicates that the variable size of the ME is caused by a process occurring throughout the jovian magnetosphere. The poleward latitudinal shift of the auroral footprint of Ganymede correlates with the poleward motion of the ME, whereas a similar relation is not present for the footprint of Io. Additionally, the expansion of the ME correlates well with an increase in magnetodisc current. These two results suggest that a changing current-sheet magnetic field is partially responsible for the variable size of the ME. Finally, magnetospheric compression is linked to a global ME contraction and brightening, though this brightening occurs predominantly in the day-side ME. This observation, and the observation that the dusk-side ME is typically brighter than the dawn-side ME, stands in contrast to the modelled and observed behaviour of field-aligned currents and thus weakens the theoretical link between field-aligned currents and the generation of the auroral ME. △ Less

Submitted 8 April, 2024; v1 submitted 5 April, 2024; originally announced April 2024.

Journal ref: A&A 688, A205 (2024)

Jovian sodium nebula and Io plasma torus S$^+$ and brightnesses 2017 -- 2023: insights into volcanic vs. sublimation supply

Authors: Jeffrey P. Morgenthaler, Carl A. Schmidt, Marissa F. Vogt, Nicholas M. Schneider, Max Marconi

Abstract: We present first results derived from the largest collection of contemporaneously recorded Jovian sodium nebula and Io plasma torus (IPT) in [S II] 673.1 nm images assembled to date. The data were recorded by the Planetary Science Institute's Io Input/Output observatory (IoIO) and provide important context to Io geologic and atmospheric studies as well as the Juno mission and supporting observatio… ▽ More We present first results derived from the largest collection of contemporaneously recorded Jovian sodium nebula and Io plasma torus (IPT) in [S II] 673.1 nm images assembled to date. The data were recorded by the Planetary Science Institute's Io Input/Output observatory (IoIO) and provide important context to Io geologic and atmospheric studies as well as the Juno mission and supporting observations. Enhancements in the observed emission are common, typically lasting 1 -- 3 months, such that the average flux of material from Io is determined by the enhancements, not any quiescent state. The enhancements are not seen at periodicities associated with modulation in solar insolation of Io's surface, thus physical process(es) other than insolation-driven sublimation must ultimately drive the bulk of Io's atmospheric escape. We suggest that geologic activity, likely involving volcanic plumes, drives escape. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 29 pages, 4 figures, submitted to Journal of Geophysical Research (Space Physics)

Constraining $f(R)$ gravity using future galaxy cluster abundance and weak-lensing mass calibration datasets

Authors: Sophie M. L. Vogt, Sebastian Bocquet, Christopher T. Davies, Joseph J. Mohr, Fabian Schmidt

Abstract: We present forecasts for constraints on the Hu \& Sawicki $f(R)$ modified gravity model using realistic mock data representative of future cluster and weak lensing surveys. We create mock thermal Sunyaev-Zel'dovich effect selected cluster samples for SPT-3G and CMB-S4 and the corresponding weak gravitational lensing data from next-generation weak-lensing (ngWL) surveys like Euclid and Rubin. We em… ▽ More We present forecasts for constraints on the Hu \& Sawicki $f(R)$ modified gravity model using realistic mock data representative of future cluster and weak lensing surveys. We create mock thermal Sunyaev-Zel'dovich effect selected cluster samples for SPT-3G and CMB-S4 and the corresponding weak gravitational lensing data from next-generation weak-lensing (ngWL) surveys like Euclid and Rubin. We employ a state-of-the-art Bayesian likelihood approach that includes all observational effects and systematic uncertainties to obtain constraints on the $f(R)$ gravity parameter $\log_{10}|f_{R0}|$. In this analysis we vary the cosmological parameters $[Ω_{\rm m}, Ω_νh^2, h^2, A_s, n_s, \log_{10}|f_{R0}|]$, which allows us to account for possible degeneracies between cosmological parameters and $f(R)$ modified gravity. The analysis accounts for $f(R)$ gravity via its effect on the halo mass function which is enhanced on cluster mass scales compared to the expectations within general relativity (GR). Assuming a fiducial GR model, the upcoming cluster dataset SPT-3G$\times$ngWL is expected to obtain an upper limit of $\log_{10}|f_{R0}| < -5.95$ at $95\,\%$ credibility, which significantly improves upon the current best bounds. The CMB-S4$\times$ngWL dataset is expected to improve this even further to $\log_{10}|f_{R0}| < -6.23$. Furthermore, $f(R)$ gravity models with $\log_{10}|f_{R0}| \geq -6$, which have larger numbers of clusters, would be distinguishable from GR with both datasets. We also report degeneracies between $\log_{10}|f_{R0}|$ and $Ω_{\mathrm{m}}$ as well as $σ_8$ for $\log_{10}|f_{R0}| > -6$ and $\log_{10}|f_{R0}| > -5$ respectively. Our forecasts indicate that future cluster abundance studies of $f(R)$ gravity will enable substantially improved constraints that are competitive with other cosmological probes. △ Less

Submitted 10 June, 2024; v1 submitted 18 January, 2024; originally announced January 2024.

Comments: 24 pages, 12 figures, minor changes in version 2 to match version in PRD, published in PRD: https://journals.aps.org/prd/abstract/10.1103/PhysRevD.109.123503

Probing interacting dark sector models with future weak lensing-informed galaxy cluster abundance constraints from SPT-3G and CMB-S4

Authors: Asmaa Mazoun, Sebastian Bocquet, Mathias Garny, Joseph J. Mohr, Henrique Rubira, Sophie M. L. Vogt

Abstract: We forecast the sensitivity of ongoing and future galaxy cluster abundance measurements to detect deviations from the cold dark matter (CDM) paradigm. Concretely, we consider a class of dark sector models that feature an interaction between dark matter and a dark radiation species (IDM-DR). This setup can be naturally realized by a non-Abelian gauge symmetry and has the potential to explain $S_8$… ▽ More We forecast the sensitivity of ongoing and future galaxy cluster abundance measurements to detect deviations from the cold dark matter (CDM) paradigm. Concretely, we consider a class of dark sector models that feature an interaction between dark matter and a dark radiation species (IDM-DR). This setup can be naturally realized by a non-Abelian gauge symmetry and has the potential to explain $S_8$ tensions arising within $Λ$CDM. We create mock catalogs of the ongoing SPT-3G as well as the future CMB-S4 surveys of galaxy clusters selected via the thermal Sunyaev-Zeldovich effect (tSZE). Both datasets are complemented with cluster mass calibration from next-generation weak gravitational lensing data (ngWL) like those expected from the Euclid mission and the Vera C. Rubin Observatory. We consider an IDM-DR scenario with parameters chosen to be in agreement with Planck 2018 data and that also leads to a low value of $S_8$ as indicated by some local structure formation analyses. Accounting for systematic and stochastic uncertainties in the mass determination and the cluster tSZE selection, we find that both SPT-3G$\times$ngWL and CMB-S4$\times$ngWL cluster data will be able to discriminate this IDM-DR model from $Λ$CDM, and thus test whether dark matter - dark radiation interactions are responsible for lowering $S_8$. Assuming IDM-DR, we forecast that the temperature of the dark radiation can be determined to about 40% (10%) with SPT-3G$\times$ngWL (CMB-S4$\times$ngWL), considering 68% credibility, while $S_8$ can be recovered with percent-level accuracy. Furthermore, we show that IDM-DR can be discriminated from massive neutrinos, and that cluster counts will be able to constrain the dark radiation temperature to be below $\sim 10%$ (at 95% credibility) of the cosmic microwave background temperature if the true cosmological model is $Λ$CDM. △ Less

Submitted 29 December, 2023; originally announced December 2023.

FMCW Radar Height Estimation of Moving Vehicles by Analyzing Multipath Reflections

Authors: Soren Kohnert, Michael Vogt, Reinhard Stolle

Abstract: Target classification is an important task of automotive radar systems. In this work, a concept for estimating the height of vehicles to allow for a differentiation between passenger cars, trucks, and others, is presented and discussed. Fixed installed radar sensors for traffic monitoring in the 77 GHz band are used to track and analyze radar echoes from individual vehicles as they move relative t… ▽ More Target classification is an important task of automotive radar systems. In this work, a concept for estimating the height of vehicles to allow for a differentiation between passenger cars, trucks, and others, is presented and discussed. Fixed installed radar sensors for traffic monitoring in the 77 GHz band are used to track and analyze radar echoes from individual vehicles as they move relative to the radar. Considering multipath propagation, which includes the ground reflection, the height of individual radar targets is estimated by analyzing the periodicity of the resulting amplitude modulation (AM) of the echo signal as a function of the horizontal distance from the radar. Two approaches have been realized to integrate the concept into an automotive FMCW signal processing scheme. Measurements in a test field using a trihedral corner reflector as an idealized target in heights from 0 to 2.5 m suggest, that the concept is suitable for height estimation in an automotive context. △ Less

Submitted 18 December, 2023; originally announced December 2023.

Comments: Preprint of S. Kohnert, M. Vogt and R. Stolle, "FMCW Radar Height Estimation of Moving Vehicles by Analyzing Multipath Reflections," 2023 20th European Radar Conference (EuRAD), Berlin, Germany, 2023, pp. 30-33, doi: 10.23919/EuRAD58043.2023.10289187

Follow Anything: Open-set detection, tracking, and following in real-time

Authors: Alaa Maalouf, Ninad Jadhav, Krishna Murthy Jatavallabhula, Makram Chahine, Daniel M. Vogt, Robert J. Wood, Antonio Torralba, Daniela Rus

Abstract: Tracking and following objects of interest is critical to several robotics use cases, ranging from industrial automation to logistics and warehousing, to healthcare and security. In this paper, we present a robotic system to detect, track, and follow any object in real-time. Our approach, dubbed ``follow anything'' (FAn), is an open-vocabulary and multimodal model -- it is not restricted to concep… ▽ More Tracking and following objects of interest is critical to several robotics use cases, ranging from industrial automation to logistics and warehousing, to healthcare and security. In this paper, we present a robotic system to detect, track, and follow any object in real-time. Our approach, dubbed ``follow anything'' (FAn), is an open-vocabulary and multimodal model -- it is not restricted to concepts seen at training time and can be applied to novel classes at inference time using text, images, or click queries. Leveraging rich visual descriptors from large-scale pre-trained models (foundation models), FAn can detect and segment objects by matching multimodal queries (text, images, clicks) against an input image sequence. These detected and segmented objects are tracked across image frames, all while accounting for occlusion and object re-emergence. We demonstrate FAn on a real-world robotic system (a micro aerial vehicle) and report its ability to seamlessly follow the objects of interest in a real-time control loop. FAn can be deployed on a laptop with a lightweight (6-8 GB) graphics card, achieving a throughput of 6-20 frames per second. To enable rapid adoption, deployment, and extensibility, we open-source all our code on our project webpage at https://github.com/alaamaalouf/FollowAnything . We also encourage the reader to watch our 5-minutes explainer video in this https://www.youtube.com/watch?v=6Mgt3EPytrw . △ Less

Submitted 9 February, 2024; v1 submitted 10 August, 2023; originally announced August 2023.

Comments: Project webpage: https://github.com/alaamaalouf/FollowAnything Explainer video: https://www.youtube.com/watch?v=6Mgt3EPytrw

Improved Mixed Dark Matter Halo Model for Ultralight Axions

Authors: Sophie M. L. Vogt, David J. E. Marsh, Alex Laguë

Abstract: We present a complete halo model for mixed dark matter composed of cold dark matter (CDM) and ultralight axion-like particles (ULAs). Our model treats ULAs as a biased tracer of CDM, in analogy to treatments of massive neutrinos and neutral hydrogen. The model accounts for clustering of ULAs around CDM host halos, and fully models the cross correlations of both components. The model inputs include… ▽ More We present a complete halo model for mixed dark matter composed of cold dark matter (CDM) and ultralight axion-like particles (ULAs). Our model treats ULAs as a biased tracer of CDM, in analogy to treatments of massive neutrinos and neutral hydrogen. The model accounts for clustering of ULAs around CDM host halos, and fully models the cross correlations of both components. The model inputs include the ULA Jeans scale, and soliton density profile. Our model can be used to predict the matter power spectrum, $P(k)$, on non-linear scales for sub-populations of ULAs across the mass range $10^{-33}\text{ eV}\leq m\leq 10^{-21}\text{ eV}$, and can be calibrated against future mixed DM simulations to improve its accuracy. The mixed DM halo model also allows us to assess the importance of various approximations. △ Less

Submitted 24 February, 2023; v1 submitted 27 September, 2022; originally announced September 2022.

Comments: 18 pages, 11 figures, codes are available at https://github.com/SophieMLV/axionHMcode and https://github.com/SophieMLV/nuHMcode, paper was accepted for publication as a Regular Article in Physical Review D

Report number: KCL-PH-TH-2022-49

Journal ref: Phys.Rev.D 107 (2023) 6, 063526

Multiscale Comparison of Nonparametric Trend Curves

Authors: Marina Khismatullina, Michael Vogt

Abstract: We develop new econometric methods for the comparison of nonparametric time trends. In many applications, practitioners are interested in whether the observed time series all have the same time trend. Moreover, they would often like to know which trends are different and in which time intervals they differ. We design a multiscale test to formally approach these questions. Specifically, we develop… ▽ More We develop new econometric methods for the comparison of nonparametric time trends. In many applications, practitioners are interested in whether the observed time series all have the same time trend. Moreover, they would often like to know which trends are different and in which time intervals they differ. We design a multiscale test to formally approach these questions. Specifically, we develop a test which allows to make rigorous confidence statements about which time trends are different and where (that is, in which time intervals) they differ. Based on our multiscale test, we further develop a clustering algorithm which allows to cluster the observed time series into groups with the same trend. We derive asymptotic theory for our test and clustering methods. The theory is complemented by a simulation study and two applications to GDP growth data and house pricing data. △ Less

Submitted 22 September, 2022; originally announced September 2022.

Estimation and Inference in High-Dimensional Panel Data Models with Interactive Fixed Effects

Authors: Oliver Linton, Maximilian Ruecker, Michael Vogt, Christopher Walsh

Abstract: We develop new econometric methods for estimation and inference in high-dimensional panel data models with interactive fixed effects. Our approach can be regarded as a non-trivial extension of the very popular common correlated effects (CCE) approach. Roughly speaking, we proceed as follows: We first construct a projection device to eliminate the unobserved factors from the model by applying a dim… ▽ More We develop new econometric methods for estimation and inference in high-dimensional panel data models with interactive fixed effects. Our approach can be regarded as a non-trivial extension of the very popular common correlated effects (CCE) approach. Roughly speaking, we proceed as follows: We first construct a projection device to eliminate the unobserved factors from the model by applying a dimensionality reduction transform to the matrix of cross-sectionally averaged covariates. The unknown parameters are then estimated by applying lasso techniques to the projected model. For inference purposes, we derive a desparsified version of our lasso-type estimator. While the original CCE approach is restricted to the low-dimensional case where the number of regressors is small and fixed, our methods can deal with both low- and high-dimensional situations where the number of regressors is large and may even exceed the overall sample size. We derive theory for our estimation and inference methods both in the large-T-case, where the time series length T tends to infinity, and in the small-T-case, where T is a fixed natural number. Specifically, we derive the convergence rate of our estimator and show that its desparsified version is asymptotically normal under suitable regularity conditions. The theoretical analysis of the paper is complemented by a simulation study and an empirical application to characteristic based asset pricing. △ Less

Submitted 28 November, 2024; v1 submitted 24 June, 2022; originally announced June 2022.

Searching for Saturn's X-rays during a rare Jupiter Magnetotail Crossing using Chandra

Authors: D. M. Weigt, W. R. Dunn, C. M. Jackman, R. Kraft, G. Branduardi-Raymont, J. D. Nichols, A. D. Wibisono, M. F. Vogt, G. R. Gladstone

Abstract: Every 19 years, Saturn passes through Jupiter's 'flapping' magnetotail. Here, we report Chandra X-ray observations of Saturn planned to coincide with this rare planetary alignment and to analyse Saturn's magnetospheric response when transitioning to this unique parameter space. We analyse three Director's Discretionary Time (DDT) observations from the High Resolution Camera (HRC-I) on-board Chandr… ▽ More Every 19 years, Saturn passes through Jupiter's 'flapping' magnetotail. Here, we report Chandra X-ray observations of Saturn planned to coincide with this rare planetary alignment and to analyse Saturn's magnetospheric response when transitioning to this unique parameter space. We analyse three Director's Discretionary Time (DDT) observations from the High Resolution Camera (HRC-I) on-board Chandra, taken on November 19, 21 and 23 2020 with the aim to find auroral and/or disk emissions. We infer the conditions in the kronian system by looking at coincident soft X-ray solar flux data from the Geostationary Operational Environmental Satellite (GOES) and Hubble Space Telescope (HST) observations of Saturn's ultraviolet (UV) auroral emissions. The large Saturn-Sun-Earth angle during this time would mean that most flares from the Earth-facing side of the Sun would not have impacted Saturn. We find no significant detection of Saturn's disk or auroral emissions in any of our observations. We calculate the 3$σ$ upper band energy flux of Saturn during this time to be 0.9 - 3.04 $\times$ 10$^{14}$ erg cm$^{-2}$ s$^{-1}$ which agrees with fluxes found from previous modelled spectra of the disk emissions. We conclude by discussing the implications of this non-detection and how it is imperative that the next fleet of X-ray telescope (such as Athena and the Lynx mission concept) continue to observe Saturn with their improved spatial and spectral resolution and very enhanced sensitivity to help us finally solve the mysteries behind Saturn's apparently elusive X-ray aurora. △ Less

Submitted 9 June, 2021; originally announced June 2021.

Comments: 8 pages, 3 figures, accepted for publication in MNRAS

Radiation tolerant, thin, passive CMOS sensors read out with the RD53A chip

Authors: Yannick Dieter, Michael Daas, Jochen Dingfelder, Tomasz Hemperek, Fabian Hügging, Jens Janssen, Hans Krüger, David-Leon Pohl, Marco Vogt, Tianyang Wang, Norbert Wermes, Pascal Wolf

Abstract: The radiation hardness of passive CMOS pixel sensors fabricated in 150 nm LFoundry technology is investigated. CMOS process lines are especially of interest for large-scale silicon detectors as they offer high production throughput at comparatively low cost. Moreover, several features like poly-silicon resistors, MIM-capacitors and several metal layers are available which can help enhance the sens… ▽ More The radiation hardness of passive CMOS pixel sensors fabricated in 150 nm LFoundry technology is investigated. CMOS process lines are especially of interest for large-scale silicon detectors as they offer high production throughput at comparatively low cost. Moreover, several features like poly-silicon resistors, MIM-capacitors and several metal layers are available which can help enhance the sensor design. The performance of a 100 $\mathrmμ$m thin passive CMOS sensor with a pixel pitch of 50 $\mathrmμ$m at different irradiation levels, 5 $\times$ 10$^{15}$n$_{\mathrm{eq}}$cm$^{-2}$ and 1 $\times$ 10$^{16}$n$_{\mathrm{eq}}$cm$^{-2}$, is presented. The sensor was bump-bonded and read out using the RD53A readout chip. After the highest fluence a hit-detection efficiency larger than 99% is measured for minimum ionising particles. The measured equivalent noise charge is comparable to conventional planar pixel sensors. Passive CMOS sensors are thus an attractive option for silicon detectors operating in radiation harsh environments like the upgrades for the LHC experiments. △ Less

Submitted 9 May, 2021; originally announced May 2021.

Comments: 18 pages, 10 figures

Nonparametric comparison of epidemic time trends: the case of COVID-19

Authors: Marina Khismatullina, Michael Vogt

Abstract: The COVID-19 pandemic is one of the most pressing issues at present. A question which is particularly important for governments and policy makers is the following: Does the virus spread in the same way in different countries? Or are there significant differences in the development of the epidemic? In this paper, we devise new inference methods that allow to detect differences in the development of… ▽ More The COVID-19 pandemic is one of the most pressing issues at present. A question which is particularly important for governments and policy makers is the following: Does the virus spread in the same way in different countries? Or are there significant differences in the development of the epidemic? In this paper, we devise new inference methods that allow to detect differences in the development of the COVID-19 epidemic across countries in a statistically rigorous way. In our empirical study, we use the methods to compare the outbreak patterns of the epidemic in a number of European countries. △ Less

Submitted 4 August, 2020; v1 submitted 31 July, 2020; originally announced July 2020.

MSC Class: 62E20; 62G10; 62G15; 62G20

BDAQ53, a versatile pixel detector readout and test system for the ATLAS and CMS HL-LHC upgrades

Authors: Michael Daas, Yannick Dieter, Jochen Dingfelder, Markus Frohne, Georgios Giakoustidis, Tomasz Hemperek, Florian Hinterkeuser, Fabian Hügging, Jens Janssen, Hans Krüger, David-Leon Pohl, Piotr Rymaszewski, Mark Standke, Tianyang Wang, Marco Vogt, Norbert Wermes

Abstract: BDAQ53 is a readout system and verification framework for hybrid pixel detector readout chips of the RD53 family. These chips are designed for the upgrade of the inner tracking detectors of the ATLAS and CMS experiments. BDAQ53 is used in applications where versatility and rapid customization are required, such as in laboratory testing environments, test beam campaigns, and permanent setups for qu… ▽ More BDAQ53 is a readout system and verification framework for hybrid pixel detector readout chips of the RD53 family. These chips are designed for the upgrade of the inner tracking detectors of the ATLAS and CMS experiments. BDAQ53 is used in applications where versatility and rapid customization are required, such as in laboratory testing environments, test beam campaigns, and permanent setups for quality control measurements. It consists of custom and commercial hardware, a Python-based software framework, and FPGA firmware. BDAQ53 is developed as open source software with both software and firmware being hosted in a public repository. △ Less

Submitted 5 October, 2020; v1 submitted 22 May, 2020; originally announced May 2020.

Comments: 6 pages, 6 figures

Estimating the Lasso's Effective Noise

Authors: Johannes Lederer, Michael Vogt

Abstract: Much of the theory for the lasso in the linear model $Y = X β^* + \varepsilon$ hinges on the quantity $2 \| X^\top \varepsilon \|_{\infty} / n$, which we call the lasso's effective noise. Among other things, the effective noise plays an important role in finite-sample bounds for the lasso, the calibration of the lasso's tuning parameter, and inference on the parameter vector $β^*$. In this paper,… ▽ More Much of the theory for the lasso in the linear model $Y = X β^* + \varepsilon$ hinges on the quantity $2 \| X^\top \varepsilon \|_{\infty} / n$, which we call the lasso's effective noise. Among other things, the effective noise plays an important role in finite-sample bounds for the lasso, the calibration of the lasso's tuning parameter, and inference on the parameter vector $β^*$. In this paper, we develop a bootstrap-based estimator of the quantiles of the effective noise. The estimator is fully data-driven, that is, does not require any additional tuning parameters. We equip our estimator with finite-sample guarantees and apply it to tuning parameter calibration for the lasso and to high-dimensional inference on the parameter vector $β^*$. △ Less

Submitted 21 January, 2022; v1 submitted 24 April, 2020; originally announced April 2020.

MSC Class: 62J07; 62F03; 62F40

Journal ref: Journal of Machine Learning Research 2021, Vol. 22, 1-32

Temporal X-ray Reconstruction using Temporal and Spectral Measurements at LCLS

Authors: Florian Christie, Alberto Andrea Lutman, Yuantao Ding, Zhirong Huang, Vatsal A. Jhalani, Jacek Krzywinski, Timothy John Maxwell, Daniel Ratner, Juliane Rönsch-Schulenburg, Mathias Vogt

Abstract: Transverse deflecting structures (TDS) are widely used in accelerator physics to measure the longitudinal density of particle bunches. When used in combination with a dispersive section, the whole longitudinal phase space density can be imaged. At the Linac Coherent Light Source (LCLS), the installation of such a device downstream of the undulators enables the reconstruction of the X-ray temporal… ▽ More Transverse deflecting structures (TDS) are widely used in accelerator physics to measure the longitudinal density of particle bunches. When used in combination with a dispersive section, the whole longitudinal phase space density can be imaged. At the Linac Coherent Light Source (LCLS), the installation of such a device downstream of the undulators enables the reconstruction of the X-ray temporal intensity profile by comparing longitudinal phase space distributions with lasing on and lasing off. However, the resolution of this TDS is limited to around 1 fs rms (root mean square), and therefore, it is not possible to resolve single self-amplified spontaneous emission (SASE) spikes within one X-ray photon pulse. By combining the power spectrum from a high resolution photon spectrometer and the temporal structure from the TDS, the overall resolution is enhanced, thus allowing the observation of temporal, single SASE spikes. The combined data from the spectrometer and the TDS is analyzed using an iterative algorithm to obtain the actual intensity profile. In this paper, we present some improvements to the reconstruction algorithm as well as real data taken at LCLS. △ Less

Submitted 7 July, 2020; v1 submitted 14 November, 2019; originally announced November 2019.

Report number: DESY 19-198

Journal ref: Scientific Reports 10, 9799 (2020)

Structural and magnetic properties of 3d transition metal oxide chains on the (001) surfaces of Ir and Pt

Authors: M. Schmitt, C. H. Park, P. Weber, A. Jäger, J. Kemmer, M. Vogt, M. Bode

Abstract: We present a survey of the structural and magnetic properties of submonolayer transition metal dioxides on the (001) surfaces of the heavy face-centered cubic (fcc) noble metals Ir and Pt performed by spin-averaged scanning tunneling microscopy (STM) and spin-polarized (SP-)STM. Our STM results confirm that deposition of Co, Fe, Mn, and Cr on the (2 {\times} 1) oxygen-reconstructed Ir(001) surface… ▽ More We present a survey of the structural and magnetic properties of submonolayer transition metal dioxides on the (001) surfaces of the heavy face-centered cubic (fcc) noble metals Ir and Pt performed by spin-averaged scanning tunneling microscopy (STM) and spin-polarized (SP-)STM. Our STM results confirm that deposition of Co, Fe, Mn, and Cr on the (2 {\times} 1) oxygen-reconstructed Ir(001) surface leads to the formation of quasi one-dimensional chains with a (3 {\times} 1) unit cell. As recently predicted by density functional theory [Ferstl et al., Phys. Rev. Lett. 117, 046101 (2016)], our SP-STM images of FeO2 and MnO2 on Ir(001) show a two-fold periodicity along the chains which is characteristic for an antiferromagnetic coupling along the chains. In addition, these two materials also exhibit spontaneous, permanent, and long-range magnetic coupling across the chains. Whereas we find a ferromagnetic inter-chain coupling for FeO2/Ir(001), the magnetic coupling of MnO2 on Ir(001) appears to be a non-collinear 120° spin spiral, resulting in a (9 {\times} 2) magnetic unit cell. On Pt(001) patches of (3 {\times} 1)-reconstructed oxide chains could only be prepared by transition metal (Co, Fe, and Mn) deposition onto the cold substrate and subsequent annealing in an oxygen atmosphere. Again SP-STM on MnO2/Pt(001) reveals a very large, (15 {\times} 2) magnetic unit cell which can tentatively be explained by a commensurate 72° spin spiral. Large scale SP-STM images reveal a long wavelength spin rotation along the MnO2 chain. △ Less

Submitted 7 October, 2019; originally announced October 2019.

Comments: 15 pages, 14 figures

Journal ref: Phys. Rev. B 100, 054431 (2019)

On the preparation and electronic properties of clean superconducting Nb(110) surfaces

Authors: Artem B. Odobesko, Soumyajyoti Haldar, Stefan Wilfert, Jakob Hagen, Johannes Jung, Niclas Schmidt, Paolo Sessi, Matthias Vogt, Stefan Heinze, Matthias Bode

Abstract: We have studied cleaning procedures of Nb(110) by verifying the surface quality with low-energy electron diffraction, Auger electron spectroscopy, and scanning tunneling microscopy and spectroscopy. Our results show that the formation of a surface-near impurity depletion zone is inhibited by the very high diffusivity of oxygen in the Nb host crystal which kicks in at annealing temperatures as low… ▽ More We have studied cleaning procedures of Nb(110) by verifying the surface quality with low-energy electron diffraction, Auger electron spectroscopy, and scanning tunneling microscopy and spectroscopy. Our results show that the formation of a surface-near impurity depletion zone is inhibited by the very high diffusivity of oxygen in the Nb host crystal which kicks in at annealing temperatures as low as a few hundred degree Celsius. Oxygen can be removed from the surface by heating the crystal up to $T = 2400^\circ$C. Tunneling spectra measured on the clean Nb(110) surface exhibit a sharp conductance peak in the occupied states at an energy of about $-450$\,meV. Density functional theory calculations show that this peak is caused by a $d_{z^2}$ surface resonance band at the $\barΓ$ point of the Brillouin zonewhich provides a large density of states above the sample surface. The clean Nb(110) surface is superconducting with a gap width and a critical magnetic field strength in good agreement to the bulk value. In an external magnetic field we observe the Abrikosov lattice of flux quanta (vortices). Spatially resolved spectra show a zero-bias anomaly in the vortex core. △ Less

Submitted 18 June, 2019; originally announced June 2019.

Comments: 19 pages, 9 figures

Journal ref: Physical Review B 99, 115437 (2019)

Indirect Chiral Magnetic Exchange through Dzyaloshinskii-Moriya--Enhanced RKKY Interactions in Manganese Oxide Chains on Ir(100)

Authors: Martin Schmitt, Paolo Moras, Gustav Bihlmayer, Ryan Cotsakis, Matthias Vogt, Jeannette Kemmer, Abderrezak Belabbes, Polina M. Sheverdyaeva, Asish K. Kundu, Carlo Carbone, Stefan Blügel, Matthias Bode

Abstract: Ruderman-Kittel-Kasuya-Yosida interaction even if their wave functions lack direct overlap. Theory predicts that spin-orbit scattering leads to a Dzyaloshinskii-Moriya type enhancement of this indirect exchange interaction, giving rise to chiral exchange terms. Here we present a combined spin-polarized scanning tunneling microscopy, angle-resolved photoemission, and density functional theory study… ▽ More Ruderman-Kittel-Kasuya-Yosida interaction even if their wave functions lack direct overlap. Theory predicts that spin-orbit scattering leads to a Dzyaloshinskii-Moriya type enhancement of this indirect exchange interaction, giving rise to chiral exchange terms. Here we present a combined spin-polarized scanning tunneling microscopy, angle-resolved photoemission, and density functional theory study of MnO$_2$ chains on Ir(100). Whereas we find antiferromagnetic Mn--Mn coupling along the chain, the inter-chain coupling across the non-magnetic Ir substrate turns out to be chiral with a $120^{\circ}$ rotation between adjacent MnO$_2$ chains. Calculations reveal that the Dzyaloshinskii-Moriya interaction results in spin spirals with a periodicity in agreement with experiment. Our findings confirm the existence of indirect chiral magnetic exchange, potentially giving rise to exotic phenomena, such as chiral spin-liquid states in spin ice systems or the emergence of new quasiparticles. △ Less

Submitted 18 June, 2019; originally announced June 2019.

Comments: 16 pages, 4 figures

Journal ref: Nature Communications 10, 2610 (2019)

Radiation-induced Effects on Data Integrity and Link Stability of the RD53A Pixel Readout Chip

Authors: M. Vogt

Abstract: The phase-2 upgrade of the LHC will require novel pixel readout chips, which deliver hit information at drastically increased data rates and tolerate unprecedented radiation levels. The large-scale prototype chip RD53A has been designed by the RD53 collaboration and manufactured in a 65 nm CMOS process, suitable for the innermost layers of both the ATLAS and the CMS experiment. In order to verify… ▽ More The phase-2 upgrade of the LHC will require novel pixel readout chips, which deliver hit information at drastically increased data rates and tolerate unprecedented radiation levels. The large-scale prototype chip RD53A has been designed by the RD53 collaboration and manufactured in a 65 nm CMOS process, suitable for the innermost layers of both the ATLAS and the CMS experiment. In order to verify the radiation hardness design goal of 500 Mrad total ionizing dose, RD53A has been irradiated using X-rays. The radiation effects on the performance of the data link, reset circuit and the clock generation have been investigated. Furthermore, the operating margins in terms of supply voltage and frequency have been analyzed. △ Less

Submitted 24 May, 2019; v1 submitted 19 March, 2019; originally announced March 2019.

Multiscale clustering of nonparametric regression curves

Authors: Michael Vogt, Oliver Linton

Abstract: In a wide range of modern applications, we observe a large number of time series rather than only a single one. It is often natural to suppose that there is some group structure in the observed time series. When each time series is modelled by a nonparametric regression equation, one may in particular assume that the observed time series can be partitioned into a small number of groups whose membe… ▽ More In a wide range of modern applications, we observe a large number of time series rather than only a single one. It is often natural to suppose that there is some group structure in the observed time series. When each time series is modelled by a nonparametric regression equation, one may in particular assume that the observed time series can be partitioned into a small number of groups whose members share the same nonparametric regression function. We develop a bandwidth-free clustering method to estimate the unknown group structure from the data. More precisely speaking, we construct multiscale estimators of the unknown groups and their unknown number which are free of classical bandwidth or smoothing parameters. In the theoretical part of the paper, we analyze the statistical properties of our estimators. Our theoretical results are derived under general conditions which allow the data to be dependent both in time series direction and across different time series. The technical analysis of the paper is complemented by a simulation study and a real-data application. △ Less

Submitted 4 March, 2019; originally announced March 2019.

MSC Class: 62G08; 62G20; 62H30

Multiscale inference and long-run variance estimation in nonparametric regression with time series errors

Authors: Marina Khismatullina, Michael Vogt

Abstract: In this paper, we develop new multiscale methods to test qualitative hypotheses about the regression function m in a nonparametric regression model with fixed design points and time series errors. In time series applications, m represents a nonparametric time trend. Practitioners are often interested in whether the trend m has certain shape properties. For example, they would like to know whether… ▽ More In this paper, we develop new multiscale methods to test qualitative hypotheses about the regression function m in a nonparametric regression model with fixed design points and time series errors. In time series applications, m represents a nonparametric time trend. Practitioners are often interested in whether the trend m has certain shape properties. For example, they would like to know whether m is constant or whether it is increasing/decreasing in certain time regions. Our multiscale methods allow to test for such shape properties of the trend m. In order to perform the methods, we require an estimator of the long-run variance of the error process. We propose a new difference-based estimator of the long-run error variance for the case that the error terms form an AR(p) process. In the technical part of the paper, we derive asymptotic theory for the proposed multiscale test and the estimator of the long-run error variance. The theory is complemented by a simulation study and an empirical application to climate data. △ Less

Submitted 4 March, 2019; originally announced March 2019.

MSC Class: 62E20; 62G10; 62G20; 62M10

On the Differences between L2-Boosting and the Lasso

Authors: Michael Vogt

Abstract: We prove that L2-Boosting lacks a theoretical property which is central to the behaviour of l1-penalized methods such as basis pursuit and the Lasso: Whereas l1-penalized methods are guaranteed to recover the sparse parameter vector in a high-dimensional linear model under an appropriate restricted nullspace property, L2-Boosting is not guaranteed to do so. Hence, L2-Boosting behaves quite differe… ▽ More We prove that L2-Boosting lacks a theoretical property which is central to the behaviour of l1-penalized methods such as basis pursuit and the Lasso: Whereas l1-penalized methods are guaranteed to recover the sparse parameter vector in a high-dimensional linear model under an appropriate restricted nullspace property, L2-Boosting is not guaranteed to do so. Hence, L2-Boosting behaves quite differently from l1-penalized methods when it comes to parameter recovery/estimation in high-dimensional linear models. △ Less

Submitted 13 December, 2018; originally announced December 2018.

Breaking crystalline symmetry of epitaxial SnTe films by strain

Authors: Steffen Schreyeck, Karl Brunner, Laurens W. Molenkamp, Grzegorz Karczewski, Martin Schmitt, Paolo Sessi, Matthias Vogt, Stefan Wilfert, Artem B. Odobesko, Matthias Bode

Abstract: SnTe belongs to the recently discovered class of topological crystalline insulators. Here we study the formation of line defects which break crystalline symmetry by strain in thin SnTe films. Strained SnTe(111) films are grown by molecular beam epitaxy on lattice- and thermal expansion coefficient-mismatched CdTe. To analyze the structural properties of the SnTe films we applied {\em in-situ} refl… ▽ More SnTe belongs to the recently discovered class of topological crystalline insulators. Here we study the formation of line defects which break crystalline symmetry by strain in thin SnTe films. Strained SnTe(111) films are grown by molecular beam epitaxy on lattice- and thermal expansion coefficient-mismatched CdTe. To analyze the structural properties of the SnTe films we applied {\em in-situ} reflection high energy electron diffraction, x-ray reflectometry, high resolution x-ray diffraction, reciprocal space mapping, and scanning tunneling microscopy. This comprehensive analytical approach reveals a twinned structure, tensile strain, bilayer surface steps and dislocation line defects forming a highly ordered dislocation network for thick films with local strains up to 31\% breaking the translational crystal symmetry. △ Less

Submitted 30 November, 2018; originally announced November 2018.

Comments: 15 pages, 4 figures

Journal ref: Phys. Rev. Materials 3, 024203 (2019)

Exoplanet Transits with Next-Generation Radio Telescopes

Authors: Benjamin J. S. Pope, Paul Withers, Joseph R. Callingham, Marissa F. Vogt

Abstract: Nearly everything we know about extrasolar planets to date comes from optical astronomy. While exoplanetary aurorae are predicted to be bright at low radio frequencies (< 1 GHz), we consider the effect of an exoplanet transit on radio emission from the host star. As radio emission from solar-like stars is concentrated in active regions, a planet occulting a starspot can cause a disproportionately… ▽ More Nearly everything we know about extrasolar planets to date comes from optical astronomy. While exoplanetary aurorae are predicted to be bright at low radio frequencies (< 1 GHz), we consider the effect of an exoplanet transit on radio emission from the host star. As radio emission from solar-like stars is concentrated in active regions, a planet occulting a starspot can cause a disproportionately deep transit which should be detectable with major radio arrays currently under development, such as the Square Kilometre Array (SKA). We calculate the radiometric sensitivity of the SKA stages and components, finding that SKA2-Mid can expect to detect transits around the very nearest solar-like stars and many cool dwarfs. The shape of this radiometric light curve will be affected by scintillation and lensing from the planet's magnetosphere and thereby encode magnetospheric parameters. Furthermore, these transits will also probe the distribution of stellar activity across a star's surface, and will help scrub out contamination from stellar activity on exoplanet transmission spectra and radial velocity spectra. This radio window on exoplanets and their host stars is therefore a valuable complement to existing optical tools. △ Less

Submitted 26 October, 2018; originally announced October 2018.

Comments: 11 pages, 2 figures. Under review at MNRAS

Solar System Ice Giants: Exoplanets in our Backyard

Authors: Abigail Rymer, Kathleen Mandt, Dana Hurley, Carey Lisse, Noam Izenberg, H. Todd Smith, Joseph Westlake, Emma Bunce, Christopher Arridge, Adam Masters, Mark Hofstadter, Amy Simon, Pontus Brandt, George Clark, Ian Cohen, Robert Allen, Sarah Vine, Kenneth Hansen, George Hospodarsky, William Kurth, Paul Romani, Laurent Lamy, Philippe Zarka, Hao Cao, Carol Paty , et al. (88 additional authors not shown)

Abstract: Future remote sensing of exoplanets will be enhanced by a thorough investigation of our solar system Ice Giants (Neptune-size planets). What can the configuration of the magnetic field tell us (remotely) about the interior, and what implications does that field have for the structure of the magnetosphere; energy input into the atmosphere, and surface geophysics (for example surface weathering of s… ▽ More Future remote sensing of exoplanets will be enhanced by a thorough investigation of our solar system Ice Giants (Neptune-size planets). What can the configuration of the magnetic field tell us (remotely) about the interior, and what implications does that field have for the structure of the magnetosphere; energy input into the atmosphere, and surface geophysics (for example surface weathering of satellites that might harbour sub-surface oceans). How can monitoring of auroral emission help inform future remote observations of emission from exoplanets? Our Solar System provides the only laboratory in which we can perform in-situ experiments to understand exoplanet formation, dynamos, systems and magnetospheres. △ Less

Submitted 10 April, 2018; originally announced April 2018.

Comments: Exoplanet Science Strategy White Paper, submitted to the National Academies of Sciences, Engineering and Medicine, Space Studies Board, 9 March 2018

Journal ref: 2020n3i176

Production and Integration of the ATLAS Insertable B-Layer

Authors: B. Abbott, J. Albert, F. Alberti, M. Alex, G. Alimonti, S. Alkire, P. Allport, S. Altenheiner, L. Ancu, E. Anderssen, A. Andreani, A. Andreazza, B. Axen, J. Arguin, M. Backhaus, G. Balbi, J. Ballansat, M. Barbero, G. Barbier, A. Bassalat, R. Bates, P. Baudin, M. Battaglia, T. Beau, R. Beccherle , et al. (352 additional authors not shown)

Abstract: During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i… ▽ More During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector. △ Less

Submitted 6 June, 2018; v1 submitted 2 March, 2018; originally announced March 2018.

Comments: 90 pages in total. Author list: ATLAS IBL Collaboration, starting page 2. 69 figures, 20 tables. Published in Journal of Instrumentation. All figures available at: https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PLOTS/PIX-2018-001

Journal ref: Journal of Instrumentation JINST 13 T05008 (2018)

Characterization and Verification Environment for the RD53A Pixel Readout Chip in 65 nm CMOS

Authors: Marco Vogt, Hans Krüger, Tomasz Hemperek, Jens Janssen, David Leon Pohl, Michael Daas

Abstract: The RD53 collaboration is currently designing a large scale prototype pixel readout chip in 65 nm CMOS technology for the phase 2 upgrades at the HL-LHC. The RD53A chip will be available by the end of the year 2017 and will be extensively tested to confirm if the circuit and the architecture make a solid foundation for the final pixel readout chips for the experiments at the HL-LHC. A test and dat… ▽ More The RD53 collaboration is currently designing a large scale prototype pixel readout chip in 65 nm CMOS technology for the phase 2 upgrades at the HL-LHC. The RD53A chip will be available by the end of the year 2017 and will be extensively tested to confirm if the circuit and the architecture make a solid foundation for the final pixel readout chips for the experiments at the HL-LHC. A test and data acquisition system for the RD53A chip is currently under development to perform single-chip and multi-chip module measurements. In addition, the verification of the RD53A design is performed in a dedicated simulation environment. The concept and the implementation of the test and data acquisition system and the simulation environment, which are based on a modular data acquisition and system testing framework, are presented in this work. △ Less

Submitted 1 February, 2018; v1 submitted 8 November, 2017; originally announced November 2017.

Occultations of astrophysical radio sources as probes of planetary environments: A case study of Jupiter and possible applications to exoplanets

Authors: Paul Withers, Marissa F. Vogt

Abstract: Properties of planetary atmospheres, ionospheres, and magnetospheres are difficult to measure from Earth. Radio occultations are a common method for measuring these properties, but they traditionally rely on radio transmissions from a spacecraft near the planet. Here we explore whether occultations of radio emissions from a distant astrophysical radio source can be used to measure magnetic field s… ▽ More Properties of planetary atmospheres, ionospheres, and magnetospheres are difficult to measure from Earth. Radio occultations are a common method for measuring these properties, but they traditionally rely on radio transmissions from a spacecraft near the planet. Here we explore whether occultations of radio emissions from a distant astrophysical radio source can be used to measure magnetic field strength, plasma density, and neutral density around planets. In a theoretical case study of Jupiter, we find that significant changes in polarization angle due to Faraday rotation occur for radio signals that pass within 10 Jupiter radii of the planet and that significant changes in frequency and power occur from radio signals that pass through the neutral atmosphere. There are sufficient candidate radio sources, such as pulsars, active galactic nuclei, and masers, that occultations are likely to occur at least once per year. For pulsars, time delays in the arrival of their emitted pulses can be used to measure plasma density. Exoplanets, whose physical properties are very challenging to observe, may also occult distant astrophysical radio sources, such as their parent stars. △ Less

Submitted 22 February, 2017; originally announced February 2017.

Comments: Published in ApJ on 13 February 2017 - http://iopscience.iop.org/article/10.3847/1538-4357/836/1/114

Journal ref: ApJ 836, 114 (2017)

Clustering with Statistical Error Control

Authors: Michael Vogt, Matthias Schmid

Abstract: This paper presents a clustering approach that allows for rigorous statistical error control similar to a statistical test. We develop estimators for both the unknown number of clusters and the clusters themselves. The estimators depend on a tuning parameter alpha which is similar to the significance level of a statistical hypothesis test. By choosing alpha, one can control the probability of over… ▽ More This paper presents a clustering approach that allows for rigorous statistical error control similar to a statistical test. We develop estimators for both the unknown number of clusters and the clusters themselves. The estimators depend on a tuning parameter alpha which is similar to the significance level of a statistical hypothesis test. By choosing alpha, one can control the probability of overestimating the true number of clusters, while the probability of underestimation is asymptotically negligible. In addition, the probability that the estimated clusters differ from the true ones is controlled. In the theoretical part of the paper, formal versions of these statements on statistical error control are derived in a standard model setting with convex clusters. A simulation study and two applications to temperature and gene expression microarray data complement the theoretical analysis. △ Less

Submitted 12 July, 2017; v1 submitted 8 February, 2017; originally announced February 2017.

Confining continuous manipulations of accelerator beamline optics

Authors: Philipp Amstutz, Sven Ackermann, Jörn Bödewadt, Christoph Lechner, Tim Plath, Mathias Vogt

Abstract: Altering the optics in one section of a linear accelerator beamline will in general cause an alteration of the optics in all downstream sections. In circular accelerators, changing the optical properties of any beamline element will have an impact on the optical functions throughout the whole machine. In many cases, however, it is desirable to change the optics in a certain beamline section withou… ▽ More Altering the optics in one section of a linear accelerator beamline will in general cause an alteration of the optics in all downstream sections. In circular accelerators, changing the optical properties of any beamline element will have an impact on the optical functions throughout the whole machine. In many cases, however, it is desirable to change the optics in a certain beamline section without disturbing any other parts of the machine. Such a local optics manipulation can be achieved by adjusting a number of additional corrector magnets that restore the initial optics after the manipulated section. In that case, the effect of the manipulation is confined in the region between the manipulated and the correcting beamline elements. Introducing a manipulation continuously, while the machine is operating, therefore requires continuous correction functions to be applied to the correcting quadrupole magnets. In this paper we present an analytic approach to calculate such continuous correction functions for six quadrupole magnets by means of a homotopy method. Besides a detailed derivation of the method, we present its application to an algebraic example, as well as its implementation at the seeding experiment sFLASH at the free-electron laser FLASH located at DESY in Hamburg. △ Less

Submitted 22 April, 2016; originally announced April 2016.

Comments: 6 pages, 6 figures, to be submitted to PRAB

Report number: DESY 16-071

Journal ref: Phys. Rev. Accel. Beams 20, 042802 (2017)

Coexistence of charge and ferromagnetic order in fcc Fe

Authors: Pin-Jui Hsu, Jens Kuegel, Jeannette Kemmer, Francesco Parisen Toldin, Tobias Mauerer, Matthias Vogt, Fakher Assaad, Matthias Bode

Abstract: Phase coexistence phenomena have been intensively studied in strongly correlated materials where several ordered states simultaneously occur or compete. Material properties critically depend on external parameters and boundary conditions, where tiny changes result in qualitatively different ground states. However, up to date, phase coexistence phenomena have exclusively been reported for complex c… ▽ More Phase coexistence phenomena have been intensively studied in strongly correlated materials where several ordered states simultaneously occur or compete. Material properties critically depend on external parameters and boundary conditions, where tiny changes result in qualitatively different ground states. However, up to date, phase coexistence phenomena have exclusively been reported for complex compounds composed of multiple elements. Here we show that charge- and magnetically ordered states coexist in double-layer Fe on Rh(001). Scanning tunneling microscopy and spectroscopy measurements reveal periodic charge order stripes below a temperature of 130 K. Close to liquid helium temperature, they are superimposed by ferromagnetic domains as observed by spin-polarized scanning tunneling microscopy. Temperature-dependent measurements reveal a pronounced cross-talk between charge and spin order at the ferromagnetic ordering temperature about 70 K, which is successfully modeled within an effective Landau theory including sixth-order terms. Our results show that subtle balance between structural modifications can lead to competing ordering phenomena. △ Less

Submitted 30 March, 2016; originally announced March 2016.

Journal ref: Nature Communications 7, 10949 (2016)

Optimised multi-ion cavity coupling

Authors: Stephen Begley, Markus Vogt, Gurpreet Kaur Gulati, Hiroki Takahashi, Matthias Keller

Abstract: Recent technological advances in cavity quantum electrodynamics (CQED) are paving the way to utilise multiple quantum emitters confined in a single optical cavity. In such systems it is crucially important to control the quantum mechanical coupling of individual emitters to the cavity mode. In this regard, combining ion trap technologies with CQED provides a particularly promising approach due to… ▽ More Recent technological advances in cavity quantum electrodynamics (CQED) are paving the way to utilise multiple quantum emitters confined in a single optical cavity. In such systems it is crucially important to control the quantum mechanical coupling of individual emitters to the cavity mode. In this regard, combining ion trap technologies with CQED provides a particularly promising approach due to the well-established motional control over trapped ions. Here we experimentally demonstrate coupling of up to five trapped ions in a string to a high-finesse optical cavity. By changing the axial position and spacing of the ions in a fully deterministic manner, we systematically characterise their coupling to the cavity mode through visibility measurements of the cavity emission. In good agreement with the theoretical model, the results demonstrate that the geometrical configuration of multiple trapped ions can be manipulated to obtain optimal cavity coupling. Our system presents a new ground to explore CQED with multiple quantum emitters, enabled by the highly controllable collective light-matter interaction. △ Less

Submitted 31 December, 2015; originally announced December 2015.

Journal ref: Phys. Rev. Lett. 116, 223001 (2016)

The uniqueness of the invariant polarisation-tensor field for spin-1 particles in storage rings

Authors: D. P. Barber, A. Kling, M. Vogt

Abstract: We argue that the invariant tensor field introduced in [1] is unique under the condition that the invariant spin field is unique, and thereby complete that part of the discussion in that paper. We argue that the invariant tensor field introduced in [1] is unique under the condition that the invariant spin field is unique, and thereby complete that part of the discussion in that paper. △ Less

Submitted 27 October, 2015; originally announced October 2015.

Comments: 8 pages

Report number: DESY 15-192

GCC-Plugin for Automated Accelerator Generation and Integration on Hybrid FPGA-SoCs

Authors: Markus Vogt, Gerald Hempel, Jeronimo Castrillon, Christian Hochberger

Abstract: In recent years, architectures combining a reconfigurable fabric and a general purpose processor on a single chip became increasingly popular. Such hybrid architectures allow extending embedded software with application specific hardware accelerators to improve performance and/or energy efficiency. Aiding system designers and programmers at handling the complexity of the required process of hardwa… ▽ More In recent years, architectures combining a reconfigurable fabric and a general purpose processor on a single chip became increasingly popular. Such hybrid architectures allow extending embedded software with application specific hardware accelerators to improve performance and/or energy efficiency. Aiding system designers and programmers at handling the complexity of the required process of hardware/software (HW/SW) partitioning is an important issue. Current methods are often restricted, either to bare-metal systems, to subsets of mainstream programming languages, or require special coding guidelines, e.g., via annotations. These restrictions still represent a high entry barrier for the wider community of programmers that new hybrid architectures are intended for. In this paper we revisit HW/SW partitioning and present a seamless programming flow for unrestricted, legacy C code. It consists of a retargetable GCC plugin that automatically identifies code sections for hardware acceleration and generates code accordingly. The proposed workflow was evaluated on the Xilinx Zynq platform using unmodified code from an embedded benchmark suite. △ Less

Submitted 23 September, 2015; v1 submitted 28 August, 2015; originally announced September 2015.

Comments: Presented at Second International Workshop on FPGAs for Software Programmers (FSP 2015) (arXiv:1508.06320)

Report number: FSP/2015/17

Observation of Wakefields and Resonances in Coherent Synchrotron Radiation

Authors: B. E. Billinghurst, J. C. Bergstrom, C. Baribeau, T. Batten, L. Dallin, T. E. May, J. M. Vogt, W. A. Wurtz, R. Warnock, D. A. Bizzozero, S. Kramer

Abstract: We report on high resolution measurements of resonances in the spectrum of coherent synchrotron radiation (CSR) at the Canadian Light Source (CLS). The resonances permeate the spectrum at wavenumber intervals of $0.074 ~\textrm{cm}^{-1}$, and are highly stable under changes in the machine setup (energy, bucket filling pattern, CSR in bursting or continuous mode). Analogous resonances were predicte… ▽ More We report on high resolution measurements of resonances in the spectrum of coherent synchrotron radiation (CSR) at the Canadian Light Source (CLS). The resonances permeate the spectrum at wavenumber intervals of $0.074 ~\textrm{cm}^{-1}$, and are highly stable under changes in the machine setup (energy, bucket filling pattern, CSR in bursting or continuous mode). Analogous resonances were predicted long ago in an idealized theory as eigenmodes of a smooth toroidal vacuum chamber driven by a bunched beam moving on a circular orbit. A corollary of peaks in the spectrum is the presence of pulses in the wakefield of the bunch at well defined spatial intervals. Through experiments and further calculations we elucidate the resonance and wakefield mechanisms in the CLS vacuum chamber, which has a fluted form much different from a smooth torus. The wakefield is observed directly in the 30-110 GHz range by RF diodes, and indirectly by an interferometer in the THz range. The wake pulse sequence found by diodes is less regular than in the toroidal model, and depends on the point of observation, but is accounted for in a simulation of fields in the fluted chamber. Attention is paid to polarization of the observed fields, and possible coherence of fields produced in adjacent bending magnets. Low frequency wakefield production appears to be mainly local in a single bend, but multi-bend effects cannot be excluded entirely, and could play a role in high frequency resonances. New simulation techniques have been developed, which should be invaluable in further work. △ Less

Submitted 5 May, 2015; v1 submitted 13 February, 2015; originally announced February 2015.

Comments: 5 figures. Differs from first posting by correction of typo and inclusion of responses to referee's questions