Showing 1–10 of 10 results for author: Visser, C W

Optimising branched fluidic networks: A unifying approach including laminar and turbulent flows, rough walls, and non-Newtonian fluids

Authors: Jan Siemen Smink, Rob Hagmeijer, Cornelis Henricus Venner, Claas Willem Visser

Abstract: Power minimisation in branched fluidic networks has gained significant attention in biology and engineering. The optimal network is defined by channel radii that minimise the sum of viscous dissipation and the volumetric energetic cost of the fluid. For limit cases including laminar flows, high Reynolds number turbulence, or smooth channel approximations, optimal solutions are known. However, no s… ▽ More Power minimisation in branched fluidic networks has gained significant attention in biology and engineering. The optimal network is defined by channel radii that minimise the sum of viscous dissipation and the volumetric energetic cost of the fluid. For limit cases including laminar flows, high Reynolds number turbulence, or smooth channel approximations, optimal solutions are known. However, no single optimisation approach captures these limit cases. Furthermore, realistic fluidic networks exhibit intermediate points in the parameter space that can hardly be optimised. Here, we present a unifying optimisation approach based on the Darcy friction factor, which has been determined for a wide range of flow regimes and fluid models. We optimise fluidic networks for the entire parameter space: Laminar and turbulent flows, including networks that exhibit both flow types; Non-Newtonian fluid models (power-law, Bingham, and Herschel-Bulkley); and Networks with arbitrary wall roughness, including non-uniform relative roughness. The optimal channel radii are presented analytically and graphically. Finally, the parameter $x$ in the optimisation relationship $Q\propto R^x$ was approximated as a function of the Reynolds number, revealing that previously-determined values of $x$ hardly apply to realistic turbulent flows. Our approach can be extended to other configurations for which the friction factor is known, such as different channel curvatures or wall slip conditions, enabling optimisation of a wide range of fluidic networks. △ Less

Submitted 15 January, 2025; originally announced January 2025.

In-air microfluidics enables rapid fabrication of emulsions, suspensions, and 3D modular (bio)materials

Authors: Claas Willem Visser, Tom Kamperman, Lisanne P. Karbaat, Detlef Lohse, Marcel Karperien

Abstract: Microfluidic chips provide unparalleled control over droplets and jets, which have advanced all natural sciences. However, microfluidic applications could be vastly expanded by increasing the per-channel throughput and directly exploiting the output of chips for rapid additive manufacturing. We unlock these features with in-air microfluidics, a new chip-free platform to manipulate microscale liqui… ▽ More Microfluidic chips provide unparalleled control over droplets and jets, which have advanced all natural sciences. However, microfluidic applications could be vastly expanded by increasing the per-channel throughput and directly exploiting the output of chips for rapid additive manufacturing. We unlock these features with in-air microfluidics, a new chip-free platform to manipulate microscale liquid streams in the air. By controlling the composition and in-air impact of liquid microjets by surface tension-driven encapsulation, we fabricate monodisperse emulsions, particles, and fibers with diameters of 20 to 300um at rates that are 10 to 100 times higher than chip-based droplet microfluidics. Furthermore, in-air microfluidics uniquely enables module-based production of three-dimensional (3D) multiscale (bio)materials in one step because droplets are partially solidified in-flight and can immediately be printed onto a substrate. In-air microfluidics is cytocompatible, as demonstrated by additive manufacturing of 3D modular constructs with tailored micro-environments for multiple cell types. Its in-line control, high throughput and resolution, and cytocompatibility make in-air microfluidics a versatile platform technology for science, industry, and health care. △ Less

Submitted 3 February, 2020; originally announced February 2020.

Journal ref: Science Advances (2018) 4(1):eaao1175

Marangoni-driven spreading of miscible liquids in the binary drop geometry

Authors: Robin B. J. Koldeweij, Bram F. van Capelleveen, Detlef Lohse, Claas Willem Visser

Abstract: When two liquids with different surface tensions come into contact, the liquid with lower surface tension spreads over the other. This Marangoni-driven spreading has been studied for various geometries and surfactants, but the dynamics of the binary geometry (drop-drop) has hardly been quantitatively investigated, despite its relevance for drop encapsulation applications. Here we use laser-induced… ▽ More When two liquids with different surface tensions come into contact, the liquid with lower surface tension spreads over the other. This Marangoni-driven spreading has been studied for various geometries and surfactants, but the dynamics of the binary geometry (drop-drop) has hardly been quantitatively investigated, despite its relevance for drop encapsulation applications. Here we use laser-induced fluorescence (LIF) to temporally resolve the distance $L(t)$ over which a low-surface-tension drop spreads over a miscible high-surface-tension drop. $L(t)$ is measured for various surface tension differences between the liquids and for various viscosities, revealing a power-law $L(t)\sim t^α$ with a spreading exponent $α\approx 0.75$. This value is consistent with previous results for viscosity-limited spreading over a deep bath. A single power law of rescaled distance as a function of rescaled time reasonably captures our experiments, as well as different geometries, miscibilities, and surface tension modifiers (solvents and surfactants). This result enables engineering the spreading dynamics of a wide range of liquid-liquid systems. △ Less

Submitted 7 August, 2018; v1 submitted 8 December, 2017; originally announced December 2017.

Comments: 13 pages, 7 figures, 1 table

Oblique drop impact onto a deep liquid pool

Authors: Marise V. Gielen, Pascal Sleutel, Jos Benschop, Michel Riepen, Victoria Voronina, Claas Willem Visser, Detlef Lohse, Jacco H. Snoeijer, Michel Versluis, Hanneke Gelderblom

Abstract: Oblique impact of drops onto a solid or liquid surface is frequently observed in nature. Most studies on drop impact and splashing, however, focus on perpendicular impact. Here, we study oblique impact of 100-micrometer drops onto a deep liquid pool, where we quantify the splashing threshold, maximum cavity dimensions and cavity collapse by high-speed imaging above and below the water surface. Gra… ▽ More Oblique impact of drops onto a solid or liquid surface is frequently observed in nature. Most studies on drop impact and splashing, however, focus on perpendicular impact. Here, we study oblique impact of 100-micrometer drops onto a deep liquid pool, where we quantify the splashing threshold, maximum cavity dimensions and cavity collapse by high-speed imaging above and below the water surface. Gravity can be neglected in these experiments. Three different impact regimes are identified: smooth deposition onto the pool, splashing in the direction of impact only, and splashing in all directions. We provide scaling arguments that delineate these regimes by accounting for the drop impact angle and Weber number. The angle of the axis of the cavity created below the water surface follows the impact angle of the drop irrespectively of the Weber number, while the cavity depth and its displacement with respect to the impact position do depend on the Weber number. Weber number dependency of both the cavity depth and displacement is modeled using an energy argument. △ Less

Submitted 25 July, 2017; v1 submitted 17 November, 2016; originally announced November 2016.

Journal ref: Phys. Rev. Fluids 2, 083602 (2017)

Laser impact on a drop

Authors: Alexander L. Klein, Claas Willem Visser, Wilco Bouwhuis, Henri Lhuissier, Chao Sun, Jacco H. Snoeijer, Emmanuel Villermaux, Detlef Lohse, Hanneke Gelderblom

Abstract: The impact of a laser pulse on a highly absorbing liquid drop can lead to a violent response: the drop is accelerated, strongly deforms, and eventually fragments. Shock waves, the ejection of matter, and even plasma formation can accompany this process ... The impact of a laser pulse on a highly absorbing liquid drop can lead to a violent response: the drop is accelerated, strongly deforms, and eventually fragments. Shock waves, the ejection of matter, and even plasma formation can accompany this process ... △ Less

Submitted 6 May, 2016; originally announced May 2016.

Comments: Submitted to Physics of Fluids as invited paper for winning the Milton van Dyke award 2014

Journal ref: Physics of Fluids 27, 091106 (2015)

On the spreading of impacting drops

Authors: Sander Wildeman, Claas Willem Visser, Chao Sun, Detlef Lohse

Abstract: The energy budget and dissipation mechanisms during droplet impact on solid surfaces are studied numerically and theoretically. We find that for high impact velocities and negligible surface friction at the solid surface (i.e. free-slip), about one half of the initial kinetic energy is transformed into surface energy, independent of the impact parameters and the detailed energy loss mechanism(s).… ▽ More The energy budget and dissipation mechanisms during droplet impact on solid surfaces are studied numerically and theoretically. We find that for high impact velocities and negligible surface friction at the solid surface (i.e. free-slip), about one half of the initial kinetic energy is transformed into surface energy, independent of the impact parameters and the detailed energy loss mechanism(s). We argue that this seemingly universal rule is related to the deformation mode of the droplet and is reminiscent of pipe flow undergoing a sudden expansion, for which the head loss can be calculated by multiplying the kinetic energy of the incoming flow by a geometrical factor. For impacts on a no-slip surface also dissipation in the shear boundary layer at the solid surface is important. In this case the geometric head loss acts as a lower bound on the total dissipation (i.e. the spreading on a no-slip surface approaches that on a free-slip surface when the droplet viscosity is send to zero). This new view on the impact problem allows for simple analytical estimates of the maximum spreading diameter of impacting drops as a function of the impact parameters and the properties of the solid surface. It bridges the gap between previous momentum balance approaches and energy balance approaches, which hitherto did not give consistent predictions in the low viscosity limit. Good agreement is found between our models and experiments, both for impacts on "slippery" or lubricated surfaces (e.g. Leidenfrost droplet impacts and head-on droplet-droplet collisions) and for impacts on no-slip surfaces. △ Less

Submitted 6 October, 2016; v1 submitted 11 February, 2016; originally announced February 2016.

Journal ref: J. Fluid Mech. 805, pp. 636-655 (2016)

Role of natural convection in the dissolution of sessile droplets

Authors: Erik Dietrich, Sander Wildeman, Claas Willem Visser, Kevin Hofhuis, E. Stefan Kooij, Harold J. W. Zandvliet, Detlef Lohse

Abstract: The dissolution process of small (initial (equivalent) radius $R_0 < 1$ mm) long-chain alcohol (of various types) sessile droplets in water is studied, disentangling diffusive and convective contributions. The latter can arise for high solubilities of the alcohol, as the density of the alcohol-water mixture is then considerably less as that of pure water, giving rise to buoyancy driven convection.… ▽ More The dissolution process of small (initial (equivalent) radius $R_0 < 1$ mm) long-chain alcohol (of various types) sessile droplets in water is studied, disentangling diffusive and convective contributions. The latter can arise for high solubilities of the alcohol, as the density of the alcohol-water mixture is then considerably less as that of pure water, giving rise to buoyancy driven convection. The convective flow around the droplets is measured, using micro-particle image velocimetry ($μ$PIV) and the schlieren technique. When nondimensionalizing the system, we find a universal $Sh\sim Ra^{1/4}$ scaling relation for all alcohols (of different solubilities) and all droplets in the convective regime. Here Sh is the Sherwood number (dimensionless mass flux) and Ra the Rayleigh number (dimensionless density difference between clean and alcohol-saturated water). This scaling implies the scaling relation $τ_c \sim R^{5/4}$ of the convective dissolution time $τ_c$, which is found to agree with experimental data. We show that in the convective regime the plume Reynolds number (the dimensionless velocity) of the detaching alcohol-saturated plume follows $Re_p \sim Sc^{-1} Ra^{5/8}$, which is confirmed by the $μ$PIV data. Here, Sc is the Schmidt number. The convective regime exists when $Ra > Ra_t$, where $Ra_t = 12$ is the transition Ra-number as extracted from the data. For $Ra < Ra_t$ and smaller, convective transport is progressively overtaken by diffusion and the above scaling relations break down. △ Less

Submitted 24 May, 2016; v1 submitted 20 January, 2016; originally announced January 2016.

Drop Shaping by Laser-Pulse Impact

Authors: Alexander L. Klein, Wilco Bouwhuis, Claas Willem Visser, Henri Lhuissier, Chao Sun, Jacco H. Snoeijer, Emmanuel Villermaux, Detlef Lohse, Hanneke Gelderblom

Abstract: We show how the deposition of laser energy induces propulsion and strong deformation of an absorbing liquid body. Combining high speed with stroboscopic imaging, we observe that a millimeter-sized dyed water drop hit by a millijoule nanosecond laser pulse propels forward at several meters per second and deforms until it eventually fragments. The drop motion results from the recoil momentum imparte… ▽ More We show how the deposition of laser energy induces propulsion and strong deformation of an absorbing liquid body. Combining high speed with stroboscopic imaging, we observe that a millimeter-sized dyed water drop hit by a millijoule nanosecond laser pulse propels forward at several meters per second and deforms until it eventually fragments. The drop motion results from the recoil momentum imparted at the drop surface by water vaporization. We measure the propulsion speed and the time-deformation law of the drop, complemented by boundary-integral simulations. The drop propulsion and shaping are explained in terms of the laser-pulse energy, the drop size, and the liquid properties. These findings are, for instance, crucial for the generation of extreme ultraviolet light in nanolithography machines. △ Less

Submitted 29 April, 2015; v1 submitted 2 February, 2015; originally announced February 2015.

Comments: Submitted as research article to Physical Review Applied, 6 pages with 6 figures

Journal ref: Klein et al (2015), Phys. Rev. Applied 3, 044018

Microdroplet impact at very high velocity

Authors: Claas Willem Visser, Yoshiyuki Tagawa, Chao Sun, Detlef Lohse

Abstract: Water microdroplet impact at velocities up to 100 m/s for droplet diameters from 12 to 100 um is studied. This parameter range covers the transition from capillary-limited to viscosity-limited spreading of the impacting droplet. Splashing is absent for all measurements; the droplets always gently spread over the surface. The maximum spreading radius is compared to several existing models. The mode… ▽ More Water microdroplet impact at velocities up to 100 m/s for droplet diameters from 12 to 100 um is studied. This parameter range covers the transition from capillary-limited to viscosity-limited spreading of the impacting droplet. Splashing is absent for all measurements; the droplets always gently spread over the surface. The maximum spreading radius is compared to several existing models. The model by Pasandideh-Fard et al. agrees well with the measured data, indicating the importance of a thin boundary layer just above the surface, in which most of the viscous dissipation in the spreading droplet takes place. As explained by the initial air layer under the impacting droplet, a contact angle of 180 degrees is used as model input. △ Less

Submitted 8 June, 2012; v1 submitted 7 June, 2012; originally announced June 2012.

Highly focused supersonic microjets

Authors: Yoshiyuki Tagawa, Nikolai Oudalov, Claas Willem Visser, Ivo R. Peters, Deveraj van der Meer, Chao Sun, Andrea Prosperetti, Detlef Lohse

Abstract: The paper describes the production of thin, focused microjets with velocities up to 850 m/s by the rapid vaporization of a small mass of liquid in an open liquid-filled capillary. The vaporization is caused by the absorption of a low-energy laser pulse. A likely explanation of the observed phenomenon is based on the impingement of the shock wave caused by the nearly-instantaneous vaporization on t… ▽ More The paper describes the production of thin, focused microjets with velocities up to 850 m/s by the rapid vaporization of a small mass of liquid in an open liquid-filled capillary. The vaporization is caused by the absorption of a low-energy laser pulse. A likely explanation of the observed phenomenon is based on the impingement of the shock wave caused by the nearly-instantaneous vaporization on the free surface of the liquid. An experimental study of the dependence of the jet velocity on several parameters is conducted, and a semi-empirical relation for its prediction is developed. The coherence of the jets, their high velocity and good reproducibility and controllability are unique features of the system described. A possible application is to the development of needle-free drug injection systems which are of great importance for global health care. △ Less

Submitted 27 April, 2012; v1 submitted 12 December, 2011; originally announced December 2011.

Comments: 10 pages, 11figures

Journal ref: Phys. Rev. X 2, 031002 (2012)