-
1D Stochastic Inversion of Airborne Time-domain Electromag-netic Data with Realistic Prior and Accounting for the Forward Modeling Error
Authors:
Peng Bai,
Giulio Vignoli,
Thomas Mejer Hansen
Abstract:
Airborne electromagnetic surveys may consist of hundreds of thousands of soundings. In most cases, this makes 3D inversions unfeasible even when the subsurface is characterized by a high level of heterogeneity. Instead, approaches based on 1D forwards are routinely used because of their computational efficiency. However, it is relatively easy to fit 3D responses with 1D forward modelling and retri…
▽ More
Airborne electromagnetic surveys may consist of hundreds of thousands of soundings. In most cases, this makes 3D inversions unfeasible even when the subsurface is characterized by a high level of heterogeneity. Instead, approaches based on 1D forwards are routinely used because of their computational efficiency. However, it is relatively easy to fit 3D responses with 1D forward modelling and retrieve apparently well-resolved conductivity models. However, those detailed features may simply be caused by fitting the modelling error connected to the approximate forward. In addition, it is, in practice, difficult to identify this kind of artifacts as the modeling error is correlated. The present study demonstrates how to assess the modelling error introduced by the 1D approximation and how to include this additional piece of information into a probabilistic inversion. Not surprisingly, it turns out that this simple modification provides not only much better reconstructions of the targets but, maybe, more importantly, guarantees a correct estimation of the corresponding reliability.
△ Less
Submitted 28 September, 2021;
originally announced September 2021.
-
Reconstruction, with tunable sparsity levels, of shear-wave velocity profiles from surface wave data
Authors:
Giulio Vignoli,
Julien Guillemoteau,
Jeniffer Barreto,
Matteo Rossi
Abstract:
The analysis of surface wave dispersion curves is a way to infer the vertical distribution of shear-wave velocity. The range of applicability is extremely wide going, for example, from seismological studies to geotechnical characterizations and exploration geophysics. However, the inversion of the dispersion curves is severely ill-posed and only limited efforts have been put into the development o…
▽ More
The analysis of surface wave dispersion curves is a way to infer the vertical distribution of shear-wave velocity. The range of applicability is extremely wide going, for example, from seismological studies to geotechnical characterizations and exploration geophysics. However, the inversion of the dispersion curves is severely ill-posed and only limited efforts have been put into the development of effective regularization strategies. In particular, relatively simple smoothing regularization terms are commonly used, even when this is in contrast with the expected features of the investigated targets. To tackle this problem, stochastic approaches can be utilized, but they are too computationally expensive to be practical, at least, in the case of large surveys. Instead, within a deterministic framework, we evaluate the applicability of a regularizer capable of providing reconstructions characterized by tunable levels of sparsity. This adjustable stabilizer is based on the minimum support regularization, applied before on other kinds of geophysical measurements, but never on surface wave data. We demonstrate the effectiveness of this stabilizer on i) two benchmark - publicly available - datasets at crustal and near-surface scales, ii) an experimental dataset collected on a well-characterized site. In addition, we discuss a possible strategy for the estimation of the depth of investigation. This strategy relies on the integrated sensitivity kernel used for the inversion and calculated for each individual propagation mode. Moreover, we discuss the reliability, and possible caveats, of the direct interpretation of this particular estimation of the depth of investigation, especially in the presence of sharp boundary reconstructions.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
Multiple-point statistical simulation for hydrogeological models: 3-D training image development and conditioning strategies
Authors:
Anne-Sophie Høyer,
Giulio Vignoli,
Thomas Mejer Hansen,
Le Thanh Vu,
Donald A. Keefer,
Flemming Jørgensen
Abstract:
Most studies on the application of geostatistical simulations based on multiple-point statistics (MPS) to hydrogeological modelling focus on relatively fine-scale models and on the estimation of facies-level structural uncertainty. Less attention is paid to the input data and the construction of Training Images (TIs). E.g. even though the TI should capture a set of spatial geological characteristi…
▽ More
Most studies on the application of geostatistical simulations based on multiple-point statistics (MPS) to hydrogeological modelling focus on relatively fine-scale models and on the estimation of facies-level structural uncertainty. Less attention is paid to the input data and the construction of Training Images (TIs). E.g. even though the TI should capture a set of spatial geological characteristics, the majority of the research still relies on 2D or quasi-3D training images. Here, we demonstrate a novel strategy for 3D MPS modelling characterized by (i) realistic 3D TIs and (ii) an effective workflow for incorporating a diverse group of geological and geophysical data sets. The study covers 2810 km^2 in southern Denmark. MPS simulations are performed on a subset of the geological succession (the lower to middle Miocene sediments) which is characterized by relatively uniform structures and dominated by sand and clay. The simulated domain is large and each of the geostatistical realizations contains approximately 45 x 10^6 voxels with size 100 m x 100 m x 5 m. Data used for the modelling include water well logs, seismic data, and a previously published 3D geological model. We apply a series of different strategies for the simulations based on data quality and develop a novel method to effectively create observed spatial trends. The TI is constructed as a relatively small 3D voxel model covering an area of 90 km^2. We use an iterative training image development strategy and find that even slight modifications in the TI create significant changes in simulations. Thus, this study shows how to include both the geological environment and the type and quality of input information in order to achieve optimal results from MPS modelling. We present a practical workflow to build the TI and effectively handle different types of input information to perform large-scale geostatistical modelling
△ Less
Submitted 21 November, 2020;
originally announced November 2020.
-
New regional stratigraphic insights from a 3D geological model of the Nasia sub-basin, Ghana, developed for hydrogeological purposes and based on reprocessed B-field data originally collected for mineral exploration
Authors:
Elikplim Abla Dzikunoo,
Giulio Vignoli,
Flemming Jørgensen,
Sandow Mark Yidana,
Bruce Banoeng-Yakubo
Abstract:
Reprocessing of regional-scale airborne electromagnetic data (AEM) is used to build a 3D geomodel of the Nasia sub-basin. The resulting 3D geomodel integrates all the prior pieces of information brought by electromagnetic data, lithologic logs, and prior geological knowledge. The AEM data, consisting of GEOTEM B-field data, were originally collected for mineral exploration. Thus, those B-field dat…
▽ More
Reprocessing of regional-scale airborne electromagnetic data (AEM) is used to build a 3D geomodel of the Nasia sub-basin. The resulting 3D geomodel integrates all the prior pieces of information brought by electromagnetic data, lithologic logs, and prior geological knowledge. The AEM data, consisting of GEOTEM B-field data, were originally collected for mineral exploration. Thus, those B-field data had to be (re)processed and properly inverted as the original survey and data handling were designed for the detection of potential mineral targets and not for detailed geological mapping. These new inversions provided a different picture of the subsurface. The new geophysical model led to new interpretations of the geological settings and to the construction of a comprehensive 3D geomodel of the basin. The evidence of a system of paleovalleys could be inferred from the AEM data. The stratigraphy of these paleovalleys suggests a different glaciation history from the known Marinoan events, commonly associated with the Kodjari formation of the Voltaian sedimentary basin. The presence of the paleovalleys within the Panabako may be correlated with mountain glaciation within the Sturtian age, though no unequivocal glaciogenic strata have yet been identified. Pre-Marinoan glaciation is recorded in rocks of the Wassangara group of the Taoudeni Basin. The combination of the Marinoan and, possibly, Sturtian glaciation episodes, both of the Cryogenian period, can be an indication of a Neoproterozoic Snowball Earth. The occurrence of those features not only has important socioeconomic consequences - as the paleovalleys can act as reservoirs for groundwater - but also from a scientific point of view, they could require a revision of the present stratigraphy of the area.
△ Less
Submitted 6 November, 2020;
originally announced November 2020.
-
(Quasi-)Real-Time Inversion of Airborne Time-Domain Electromagnetic Data via Artificial Neural Network
Authors:
Peng Bai,
Giulio Vignoli,
Andrea Viezzoli,
Jouni Nevalainen,
Giuseppina Vacca
Abstract:
The possibility to have results very quickly after, or even during, the collection of electromagnetic data would be important, not only for quality check purposes, but also for adjusting the location of the proposed flight lines during an airborne time-domain acquisition. This kind of readiness could have a large impact in terms of optimization of the Value of Information of the measurements to be…
▽ More
The possibility to have results very quickly after, or even during, the collection of electromagnetic data would be important, not only for quality check purposes, but also for adjusting the location of the proposed flight lines during an airborne time-domain acquisition. This kind of readiness could have a large impact in terms of optimization of the Value of Information of the measurements to be acquired. In addition, the importance of having fast tools for retrieving resistivity models from airborne time-domain data is demonstrated by the fact that Conductivity-Depth Imaging methodologies are still the standard in mineral exploration. In fact, they are extremely computationally efficient, and, at the same time, they preserve a very high lateral resolution. For these reasons, they are often preferred to inversion strategies even if the latter approaches are generally more accurate in terms of proper reconstruction of the depth of the targets and of reliable retrieval of true resistivity values of the subsurface. In this research, we discuss a novel approach, based on neural network techniques, capable of retrieving resistivity models with a quality comparable with the inversion strategy, but in a fraction of the time. We demonstrate the advantages of the proposed novel approach on synthetic and field datasets.
△ Less
Submitted 6 November, 2020;
originally announced November 2020.
-
Inversion of multiconfiguration complex EMI data with minimum gradient support regularization: A case study
Authors:
Gian Piero Deidda,
Patricia Diaz de Alba,
Giuseppe Rodriguez,
Giulio Vignoli
Abstract:
Frequency-domain electromagnetic instruments allow the collection of data in different configurations, that is, varying the intercoil spacing, the frequency, and the height above the ground. Their handy size makes these tools very practical for near-surface characterization in many fields of applications, for example, precision agriculture, pollution assessments, and shallow geological investigati…
▽ More
Frequency-domain electromagnetic instruments allow the collection of data in different configurations, that is, varying the intercoil spacing, the frequency, and the height above the ground. Their handy size makes these tools very practical for near-surface characterization in many fields of applications, for example, precision agriculture, pollution assessments, and shallow geological investigations. To this end, the inversion of either the real (in-phase) or the imaginary (quadrature) component of the signal has already been studied. Furthermore, in many situations, a regularization scheme retrieving smooth solutions is blindly applied, without taking into account the prior available knowledge. The present work discusses an algorithm for the inversion of the complex signal in its entirety, as well as a regularization method that promotes the sparsity of the reconstructed electrical conductivity distribution. This regularization strategy incorporates a minimum gradient support stabilizer into a truncated generalized singular value decomposition scheme. The results of the implementation of this sparsity-enhancing regularization at each step of a damped Gauss-Newton inversion algorithm (based on a nonlinear forward model) are compared with the solutions obtained via a standard smooth stabilizer. An approach for estimating the depth of investigation, that is, the maximum depth that can be investigated by a chosen instrument configuration in a particular experimental setting is also discussed. The effectiveness and limitations of the whole inversion algorithm are demonstrated on synthetic and real data sets.
△ Less
Submitted 10 February, 2020; v1 submitted 9 April, 2019;
originally announced April 2019.
-
Focusing inversion technique applied to radar tomographic data
Authors:
G. Vignoli,
L. Zanzi
Abstract:
Traveltime tomography is a very effective tool to reconstruct acoustic, seismic or electromagnetic wave speed distribution. To infer the velocity image of the medium from the measurements of first arrivals is a typical example of ill-posed problem. In the framework of Tikhonov regularization theory, in order to replace an ill-posed problem by a well-posed one and to get a unique and stable solut…
▽ More
Traveltime tomography is a very effective tool to reconstruct acoustic, seismic or electromagnetic wave speed distribution. To infer the velocity image of the medium from the measurements of first arrivals is a typical example of ill-posed problem. In the framework of Tikhonov regularization theory, in order to replace an ill-posed problem by a well-posed one and to get a unique and stable solution, a stabilizing functional (stabilizer) has to be introduced. The stabilizer selects the desired solution from a class of solutions with a specific physical and/or geometrical property; e.g., the existence of sharp boundaries separating media with different petrophysical parameters. Usually stabilizers based on maximum smoothness criteria are used during the inversion process; in these cases the solutions provide smooth images which, in many situations, do not describe the examined objects properly. Recently a new algorithm of direct minimization of the Tikhonov parametric functional with minimum support stabilizer has been introduced; it produces clear and focused images of targets with sharp boundaries. In this research we apply this new technique to real radar tomographic data and we compare the obtained result with the solution generated by the more traditional minimum norm stabilizer.
△ Less
Submitted 28 June, 2006;
originally announced June 2006.
-
Focusing inversion techniques applied to electrical resistance tomography in an experimental tank
Authors:
G. Pagliara,
G. Vignoli
Abstract:
We present an algorithm for focusing inversion of electrical resistivity tomography (ERT) data. ERT is a typical example of ill-posed problem. Regularization is the most common way to face this kind of problems; it basically consists in using a priori information about targets to reduce the ambiguity and the instability of the solution. By using the minimum gradient support (MGS) stabilizing fun…
▽ More
We present an algorithm for focusing inversion of electrical resistivity tomography (ERT) data. ERT is a typical example of ill-posed problem. Regularization is the most common way to face this kind of problems; it basically consists in using a priori information about targets to reduce the ambiguity and the instability of the solution. By using the minimum gradient support (MGS) stabilizing functional, we introduce the following geometrical prior information in the reconstruction process: anomalies have sharp boundaries. The presented work is embedded in a project (L.A.R.A.) which aims at the estimation of hydrogeological properties from geophysical investigations. L.A.R.A. facilities include a simulation tank (4 m x 8 m x 1.35 m); 160 electrodes are located all around the tank and used for 3-D ERT. Because of the large number of electrodes and their dimensions, it is important to model their effect in order to correctly evaluate the electrical system response. The forward modelling in the presented algorithm is based on the so-called complete electrode model that takes into account the presence of the electrodes and their contact impedances. In this paper, we compare the results obtained with different regularizing functionals applied on a synthetic model.
△ Less
Submitted 27 June, 2006;
originally announced June 2006.
