-
Ordered and Disordered Skyrmion States on a Square Substrate
Authors:
J. C. Bellizotti Souza,
C. J. O. Reichhardt,
C. Reichhardt,
N. P. Vizarim,
P. A. Venegas
Abstract:
We examine the ordering of skyrmions interacting with a square substrate created from a modulation of anisotropy using atomistic simulations. We consider fillings of {\it f} = 1.5, 2.0, 2.5, 3.0, and 3.5 skyrmions per potential minimum as a function of magnetic field and sample size. For a filling of {\it f} = 2.0, we find various dimer orderings, such as tilted dimer states, as well as antiferrom…
▽ More
We examine the ordering of skyrmions interacting with a square substrate created from a modulation of anisotropy using atomistic simulations. We consider fillings of {\it f} = 1.5, 2.0, 2.5, 3.0, and 3.5 skyrmions per potential minimum as a function of magnetic field and sample size. For a filling of {\it f} = 2.0, we find various dimer orderings, such as tilted dimer states, as well as antiferromagnetic ordering that is similar to the colloidal dimer ordering seen on square substrates. The ability of the skyrmions to change shape or annihilate produces additional states that do not occur in the colloidal systems. For certain parameters at {\it f} = 2.0, half of the skyrmions can annihilate to form a square lattice, or a superlattice of trimers and monomers containing skyrmions of different sizes can form. At lower fields, ordered stretched skyrmion states can appear, and for zero field, there can be ordered stripe states. For {\it f} = 3.0, we find ferromagnetic ordered trimers, tilted lattices, columnar lattices, and stretched phases. For fillings of {\it f} = 1.5 and 2.5, we find bipartite lattices, different ordered and disordered states, and several extended disordered regions produced by frustration effects.
△ Less
Submitted 23 April, 2025;
originally announced April 2025.
-
Sliding Dynamics of Skyrmion Molecular Crystals
Authors:
J. C. Bellizotti Souza,
C. J. O. Reichhardt,
C. Reichhardt,
N. P. Vizarim,
P. A. Venegas
Abstract:
Using both atomistic and particle-based simulations, we investigate the current-driven dynamics of skyrmions on two-dimensional periodic substrates when there are multiple skyrmions per substrate minimum. At zero drive, the system forms pinned skyrmion molecular crystal states consisting of dimers, trimers, or dimer-trimer mixtures that have both positional and orientational order. On a square sub…
▽ More
Using both atomistic and particle-based simulations, we investigate the current-driven dynamics of skyrmions on two-dimensional periodic substrates when there are multiple skyrmions per substrate minimum. At zero drive, the system forms pinned skyrmion molecular crystal states consisting of dimers, trimers, or dimer-trimer mixtures that have both positional and orientational order. On a square substrate lattice, the motion above depinning occurs via a running soliton that travels completely transverse to the applied current. This motion is generated by a torque from the Magnus force, which rotates the $n$-mer states perpendicular to the applied current. At higher drives, the flow becomes disordered while the Hall angle diminishes and gradually approaches the intrinsic value. In some cases, we also find directional locking where the Hall angle becomes locked to certain symmetry directions of the substrate over a range of currents. The transitions into and out of directionally locked states are accompanied by negative differential mobility in which the net velocity decreases as the drive increases. On a triangular substrate, we find no transverse mobility effects, but still observe directionally locked motion.
△ Less
Submitted 2 April, 2025;
originally announced April 2025.
-
Skyrmion-Skyrmionium Phase Separation and Laning Transitions via Spin-Orbit Torque Currents
Authors:
N. P. Vizarim,
J. C. Bellizotti Souza,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas,
F. Béron
Abstract:
Many driven binary systems can exhibit laning transitions when the two species have different mobilities, such as colloidal particles with opposite charges in electric fields. Another example is pedestrian or active matter systems, where particles moving in opposite directions form a phase-separated state that enhances the overall mobility. In this work, we use atomistic simulations to demonstrate…
▽ More
Many driven binary systems can exhibit laning transitions when the two species have different mobilities, such as colloidal particles with opposite charges in electric fields. Another example is pedestrian or active matter systems, where particles moving in opposite directions form a phase-separated state that enhances the overall mobility. In this work, we use atomistic simulations to demonstrate that mixtures of skyrmions and skyrmioniums also exhibit pattern formation and laning transitions. Skyrmions move more slowly and at a finite Hall angle compared to skyrmioniums, which move faster and without a Hall effect. At low drives, the system forms a partially jammed phase where the skyrmionium is dragged by the surrounding skyrmions, resulting in a finite angle of motion for the skyrmionium. At higher drives, the system transitions into a laned state, but unlike colloidal systems, the lanes in the skyrmion skyrmionium mixture are tilted relative to the driving direction due to the intrinsic skyrmion Hall angle. In the laned state, the skyrmionium angle of motion is reversed when it aligns with the tilted lane structure. At even higher drives, the skyrmioniums collapse into skyrmions. Below a critical skyrmion density, both textures can move independently with few collisions, but above this density, the laning state disappears entirely, and the system transitions to a skyrmion-only state. We map out the velocity and Hall responses of the different textures and identify three distinct phases: partially jammed, laned, and skyrmion-only moving crystal states. We compare our results to recent observations of tilted laning phases in pedestrian flows, where chiral symmetry breaking in the particle interactions leads to similar behavior.
△ Less
Submitted 13 February, 2025;
originally announced February 2025.
-
Topological Transitions, Pinning and Ratchets for Driven Magnetic Hopfions in Nanostructures
Authors:
J. C. Bellizotti Souza,
C. J. O. Reichhardt,
C. Reichhardt,
A. Saxena,
N. P. Vizarim,
P. A. Venegas
Abstract:
Using atomistic simulations, we examine the dynamics of three-dimensional magnetic hopfions interacting with an array of line defects or posts as a function of defect spacing, defect strength, and current. We find a pinned phase, a sliding phase where a hopfion can move through the posts or hurdles by distorting, and a regime where the hopfion becomes compressed and transforms into a toron that is…
▽ More
Using atomistic simulations, we examine the dynamics of three-dimensional magnetic hopfions interacting with an array of line defects or posts as a function of defect spacing, defect strength, and current. We find a pinned phase, a sliding phase where a hopfion can move through the posts or hurdles by distorting, and a regime where the hopfion becomes compressed and transforms into a toron that is half the size of the hopfion and moves at a lower velocity. The toron states occur when the defects are strong; however, in the toron regime, it is possible to stabilize sliding hopfions by increasing the applied current. Hopfions move without a Hall angle, while the toron moves with a finite Hall angle. We also show that when a hopfion interacts with an asymmetric array of planar defects, a ratchet effect consisting of a net dc motion can be realized under purely ac driving.
△ Less
Submitted 30 January, 2025;
originally announced January 2025.
-
Skyrmionium Dynamics and Stability on One Dimensional Anisotropy Patterns
Authors:
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
We examine a skyrmionium driven over a periodic anisotropy pattern, which consists of disorder free regions and disordered regions. For small defect densities, the skyrmionium flows for an extended range of currents, and there is a critical current above which it transforms into a skyrmion. For increased amounts of quenched disorder, the current needed for the skyrmionium to transform into a skyrm…
▽ More
We examine a skyrmionium driven over a periodic anisotropy pattern, which consists of disorder free regions and disordered regions. For small defect densities, the skyrmionium flows for an extended range of currents, and there is a critical current above which it transforms into a skyrmion. For increased amounts of quenched disorder, the current needed for the skyrmionium to transform into a skyrmion decreases, and there is a critical disorder density above which a moving skyrmionium is not stable. In the moving state, the skyrmionium to skyrmion transformation leads to a drop in the velocity and the onset of a finite skyrmion Hall angle. We also find a reentrance effect in which the pinned skyrmionium transforms into a skyrmion just above depinning, restabilizes into skyrmionium at larger drives, and becomes unstable again at large currents. We also show that adding a transverse shaking drive can increase the lifetime of a moving skyrmionium by reducing the effect of the pinning in the direction of the drive.
△ Less
Submitted 10 January, 2025;
originally announced January 2025.
-
Comparing Dynamics, Pinning and Ratchet Effects for Skyrmionium, Skyrmions, and Antiskyrmions
Authors:
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
We compare the driven dynamics of skyrmions, antiskyrmions, and skyrmionium interacting with random disorder, circular defects, and asymmetric potentials. When interacting with a line defect at a constant drive, skyrmions and antiskyrmions show an acceleration effect for motion along the wall and a drop in velocity when they can cross the barrier. In contrast, skyrmionium travels at a reduced velo…
▽ More
We compare the driven dynamics of skyrmions, antiskyrmions, and skyrmionium interacting with random disorder, circular defects, and asymmetric potentials. When interacting with a line defect at a constant drive, skyrmions and antiskyrmions show an acceleration effect for motion along the wall and a drop in velocity when they can cross the barrier. In contrast, skyrmionium travels at a reduced velocity when moving along a wall, and exhibits an increase in velocity once it can cross the barrier. For point defects, skyrmionium can be pinned for a finite fixed period of time, while for skyrmions and antiskyrmions, the Magnus force creates a deflection from the defect and an acceleration effect. For a given drive, skyrmionium moves twice as fast as skyrmions; however, skyrmionium is more susceptible to pinning effects than skyrmions and antiskyrmions. Additionally, there is a critical threshold where the skyrmionium transforms to a skyrmion that is associated with a drop in the velocity of the texture. We show that all three textures exhibit diode and ratchet effects when interacting with an asymmetric substrate, but skyrmions and antiskyrmions show a stronger ratcheting effect than skyrmionium due to the Magnus force.
△ Less
Submitted 2 December, 2024;
originally announced December 2024.
-
Skyrmion soliton motion on periodic substrates by atomistic and particle based simulations
Authors:
J. C. B. Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
We compare the dynamical behavior of magnetic skyrmions interacting with square and triangular defect arrays just above commensuration using both an atomistic model and a particle-based model. Under an applied drive, the initial motion is a kink traveling through the pinned skyrmion lattice. For the square defect array, both models agree well and show a regime in which the soliton motion is locked…
▽ More
We compare the dynamical behavior of magnetic skyrmions interacting with square and triangular defect arrays just above commensuration using both an atomistic model and a particle-based model. Under an applied drive, the initial motion is a kink traveling through the pinned skyrmion lattice. For the square defect array, both models agree well and show a regime in which the soliton motion is locked along 45$^\circ$. The atomistic model also produces locking of a soliton along 30$^\circ$, while the particle-based model does not. For the triangular defect array, the atomistic model exhibits soliton motion locked to 30$^\circ$ over a wide region of external driving force values. In contrast, the particle-based model gives soliton motion locked to 45$^\circ$ over only a small range of external driving force values. The difference arises because the nondeforming particle model facilitates meandering skyrmion orbits while the deformable atomistic model enables stronger skyrmion-skyrmion interactions that reduce the meandering. Our results indicate that soliton motion through pinned skyrmion lattices on a periodic substrate is a robust effect and could open the possibility of using solitons as information carriers. Our results also provide a better understanding of the regimes for which particle-based models of skyrmions are best suited.
△ Less
Submitted 4 September, 2024;
originally announced September 2024.
-
Reversible to Irreversible Transitions for ac Driven Skyrmions on Periodic Substrates
Authors:
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
Using atomistic simulations, we investigate the dynamical behavior of magnetic skyrmions in dimer and trimer molecular crystal arrangements, as well as bipartite lattices at 3/2 and 5/2 fillings, under ac driving over a square array of anisotropy defects. For low ac amplitudes, at all fillings we find reversible motion where the skyrmions return to their original positions at the end of each ac dr…
▽ More
Using atomistic simulations, we investigate the dynamical behavior of magnetic skyrmions in dimer and trimer molecular crystal arrangements, as well as bipartite lattices at 3/2 and 5/2 fillings, under ac driving over a square array of anisotropy defects. For low ac amplitudes, at all fillings we find reversible motion where the skyrmions return to their original positions at the end of each ac drive cycle and the diffusion is zero. We also identify two distinct irreversible regimes. The first is a translating regime in which the skyrmions form channels of flow in opposing directions and translate by one substrate lattice constant per ac drive cycle. The translating state appears in the dimer and trimer states, and produces pronounced peaks in the diffusivity in the direction perpendicular to the external drive. For larger ac amplitudes, we find chaotic irreversible motion in which the skyrmions can randomly exchange places with each other over time, producing long-time diffusive behavior both parallel and perpendicular to the ac driving direction.
△ Less
Submitted 28 August, 2024;
originally announced August 2024.
-
Skyrmion Molecular Crystals and Superlattices on Triangular Substrates
Authors:
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
P. A. Venegas,
C. Reichhardt
Abstract:
Using atomistic simulations, we show that new types of skyrmion states called skyrmion molecular crystals and skyrmion superlattices can be realized on triangular substrates when there are two or three skyrmions per substrate minimum. We find that as a function of the magnetic field and substrate periodicity, a remarkably wide variety of ordered phases appear similar to those found in colloidal or…
▽ More
Using atomistic simulations, we show that new types of skyrmion states called skyrmion molecular crystals and skyrmion superlattices can be realized on triangular substrates when there are two or three skyrmions per substrate minimum. We find that as a function of the magnetic field and substrate periodicity, a remarkably wide variety of ordered phases appear similar to those found in colloidal or Wigner molecular crystals, including ferromagnetic and herringbone states. The ability of the skyrmions to annihilate, deform, and change size gives rise to a variety of superlattice states in which a mixture of different skyrmion sizes and shapes produces bipartate or more complex lattice structures. Our results are relevant for skyrmions on structured triangular substrates, in magnetic arrays, or skyrmions in moire materials.
△ Less
Submitted 29 July, 2024;
originally announced July 2024.
-
Error estimates for a bilinear optimal control problem of Maxwell's equations
Authors:
Francisco Fuica,
Felipe Lepe,
Pablo Venegas
Abstract:
We consider a control-constrained optimal control problem subject to time-harmonic Maxwell's equations; the control variable belongs to a finite-dimensional set and enters the state equation as a coefficient. We derive existence of optimal solutions, and analyze first- and second-order optimality conditions. We devise an approximation scheme based on the lowest order Nédélec finite elements to app…
▽ More
We consider a control-constrained optimal control problem subject to time-harmonic Maxwell's equations; the control variable belongs to a finite-dimensional set and enters the state equation as a coefficient. We derive existence of optimal solutions, and analyze first- and second-order optimality conditions. We devise an approximation scheme based on the lowest order Nédélec finite elements to approximate optimal solutions. We analyze convergence properties of the proposed scheme and prove a priori error estimates. We also design an a posteriori error estimator that can be decomposed as the sum two contributions related to the discretization of the state and adjoint equations, and prove that the devised error estimator is reliable and locally efficient. We perform numerical tests in order to assess the performance of the devised discretization strategy and the a posteriori error estimator.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Shapiro Steps and Stability of Skyrmions Interacting with Alternating Anisotropy Under the Influence of ac and dc Drives
Authors:
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
We use atomistic simulations to examine the sliding dynamics of a skyrmion in a two-dimensional system containing a periodic one-dimensional stripe pattern of variations between low and high values of the perpendicular magnetic anisotropy. The skyrmion changes in size as it crosses the interface between two anisotropy regions. Upon applying combined dc and ac driving in either parallel or perpendi…
▽ More
We use atomistic simulations to examine the sliding dynamics of a skyrmion in a two-dimensional system containing a periodic one-dimensional stripe pattern of variations between low and high values of the perpendicular magnetic anisotropy. The skyrmion changes in size as it crosses the interface between two anisotropy regions. Upon applying combined dc and ac driving in either parallel or perpendicular directions, we observe a wide variety of Shapiro steps, Shapiro spikes, and phase-locking phenomena. The phase-locked orbits have two-dimensional dynamics due to the gyrotropic or Magnus dynamics of the skyrmions, and are distinct from the phase-locked orbits found for strictly overdamped systems. Along a given Shapiro step when the ac drive is perpendicular to the dc drive, the velocity parallel to the ac drive is locked while the velocity in the perpendicular direction increases with increasing drive to form Shapiro spikes. At the transition between adjacent Shapiro steps, the parallel velocity jumps up to the next step value, and the perpendicular velocity drops. The skyrmion Hall angle shows a series of spikes as a function of increasing dc drive, where the jumps correspond to the transition between different phase-locked steps. At high drives, the Shapiro steps and Shapiro spikes are lost. When both the ac and dc drives are parallel to the stripe periodicity direction, Shapiro steps appear, while if the dc drive is parallel to the stripe periodicity direction and the ac drive is perpendicular to the stripe periodicity, there are only two locked phases, and the skyrmion motion consists of a combination of sliding along the interfaces between the two anisotropy values and jumping across the interfaces.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
Controlled Skyrmion Ratchet in Linear Protrusion Defects
Authors:
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
Using atomistic simulations, we investigate the dynamical behavior of a single skyrmion interacting with an asymmetric linear protrusion array under external ac driving. When the ac drive is applied along the $x$ direction, the skyrmion moves along the hard direction of the substrate asymmetry in three phases: a pinned phase with localized skyrmion orbits, a constant velocity phase where the orbit…
▽ More
Using atomistic simulations, we investigate the dynamical behavior of a single skyrmion interacting with an asymmetric linear protrusion array under external ac driving. When the ac drive is applied along the $x$ direction, the skyrmion moves along the hard direction of the substrate asymmetry in three phases: a pinned phase with localized skyrmion orbits, a constant velocity phase where the orbits become delocalized, and a reentrant pinned phase with larger localized orbits. We measure the dependence of the skyrmion velocity on the frequency and amplitude of the ac drive. All three phases appear for all frequency values, and in the constant velocity phase the skyrmion velocity depends only on the frequency and not on the amplitude of the ac drive. When ac driving is applied in the $y$ direction, the skyrmion moves along the easy direction of the substrate asymmetry and exhibits the same three phases as for $x$ direction driving along with a fourth phase which, at high driving frequencies, consists of a series of constant velocity phases, each with different average skyrmion velocities. For low frequencies, the constant velocity phase is lost and the skyrmion speed increases linearly with increasing ac drive amplitude due to a Magnus boost effect. Our findings suggest new ways to create reliable data transport for spintronic devices using skyrmions as information carriers, where the skyrmion direction and speed can be controlled by varying only the ac drive amplitude and frequency.
△ Less
Submitted 30 November, 2023;
originally announced November 2023.
-
Skyrmion Transport and Annihilation in Funnel Geometries
Authors:
F. S. Rocha,
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
Using atomistic simulations, we have investigated the transport and annihilation of skyrmions interacting with a funnel array under a current applied perpendicular to the funnel axis. We find that transport without annihilation is possible at low currents, when the motion is dominated by skyrmion-skyrmion interactions and skyrmions push each other through the funnel opening. Skyrmion annihilation…
▽ More
Using atomistic simulations, we have investigated the transport and annihilation of skyrmions interacting with a funnel array under a current applied perpendicular to the funnel axis. We find that transport without annihilation is possible at low currents, when the motion is dominated by skyrmion-skyrmion interactions and skyrmions push each other through the funnel opening. Skyrmion annihilation occurs for higher currents when skyrmions in the upper half of the sample exert pressure on skyrmions in the bottom half of the sample due to the external current. Upon interacting with the funnel wall, the skyrmions undergo a size reduction that makes it easier for them to pass through the funnel opening. We find five phases as a function of the applied current and the size of the funnel opening: (i) pinned, (ii) transport without annihilation, (iii) transport with annihilation, (iv) complete annihilation, and (v) a reentrant pinning phase that only occurs for very narrow openings. Our findings provide insight into how to control skyrmion transport using funnel arrays by delineating regimes in which transport of skyrmions is possible as well as the conditions under which annihilation occurs.
△ Less
Submitted 17 October, 2023;
originally announced October 2023.
-
Soliton motion induced along ferromagnetic skyrmion chains in chiral thin nanotracks
Authors:
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
Using atomistic magnetic simulations we investigate the soliton motion along a pinned skyrmion chain containing an interstitial skyrmion. We find that the soliton can exhibit stable motion along the chain without a skyrmion Hall effect for an extended range of drives. Under a constant drive the solitons have a constant velocity. We also measure the skyrmion velocity-current curves and identify the…
▽ More
Using atomistic magnetic simulations we investigate the soliton motion along a pinned skyrmion chain containing an interstitial skyrmion. We find that the soliton can exhibit stable motion along the chain without a skyrmion Hall effect for an extended range of drives. Under a constant drive the solitons have a constant velocity. We also measure the skyrmion velocity-current curves and identify the signatures of different phases including a pinned phase, stable soliton motion, and quasi-free motion at higher drives where all of the skyrmions depin from the pinning centers and move along the rigid wall. In the quasi-free motion regime, the velocity is oscillatory due to the motion of the skyrmions over the pinning sites. For increasing pinning strength, the onset of soliton motion shifts to higher values of current density. We also find that for stronger pinning, the characteristic velocity-current shape is affected by the annihilation of single or multiple skyrmions in the drive interval over which the soliton motion occurs. Our results indicate that stable skyrmion soliton motion is possible and could be useful for technological applications.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
Spontaneous Skyrmion Conformal Lattice and Transverse Motion During dc and ac Compression
Authors:
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
We use atomistic-based simulations to investigate the behavior of ferromagnetic skyrmions being continuously compressed against a rigid wall under dc and ac drives. The compressed skyrmions can be annihilated close to the wall and form a conformal crystal with both a size and a density gradient, making it distinct from conformal crystals observed previously for superconducting vortices and colloid…
▽ More
We use atomistic-based simulations to investigate the behavior of ferromagnetic skyrmions being continuously compressed against a rigid wall under dc and ac drives. The compressed skyrmions can be annihilated close to the wall and form a conformal crystal with both a size and a density gradient, making it distinct from conformal crystals observed previously for superconducting vortices and colloidal particles. For both dc and ac driving, the skyrmions can move transverse to the compression direction due to a combination of density and size gradients. Forces in the compression direction are converted by the Magnus force into transverse motion. Under ac driving, the amount of skyrmion annihilation is reduced and we find a skyrmion Magnus ratchet pump. We also observe shear banding in which skyrmions near the wall move up to twice as fast as skyrmions further from the wall. When we vary the magnitude of the applied drive, we find a critical current above which the skyrmions are completely annihilated during a time scale that depends on the magnitude of the drive. By varying the magnetic parameters, we find that the transverse motion is strongly dependent on the skyrmion size. Smaller skyrmions are more rigid, which interferes with the size gradient and destroys the transverse motion. We also confirm the role of the size gradient by comparing our atomistic simulations with a particle-based model, where we find that the transverse motion is only transient. Our results are relevant for applications where skyrmions encounter repulsive magnetic walls, domain walls, or interfaces.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Magnetic interactions of 4$f$ electrons in the topological insulator chalcogenide Bi$_{2}$Se$_{3}$
Authors:
J. C. Souza,
M. Carlone,
G. G. Lesseux,
H. B. Pizzi,
G. S. Freitas,
R. R. Urbano,
P. A. Venegas,
P. G. Pagliuso
Abstract:
The gap opening mechanism of a topological insulator, the quantum anomalous Hall effect and the axion physics are still pressing open questions and a microscopic viewpoint to further understand the role of magnetism in topology is highly desirable. In this work we have performed a microscopic investigation, by means of electron spin resonance (ESR) along with complementary bulk measurements, on th…
▽ More
The gap opening mechanism of a topological insulator, the quantum anomalous Hall effect and the axion physics are still pressing open questions and a microscopic viewpoint to further understand the role of magnetism in topology is highly desirable. In this work we have performed a microscopic investigation, by means of electron spin resonance (ESR) along with complementary bulk measurements, on the chalcogenide (Bi$_{1-x}$Gd$_{x}$)$_{2}$Se$_{3}$ ($x$ = 0, 0.001, 0.002 and 0.006). Our analysis of the Gd$^{3+}$ spin dynamics reveal no significant change of the Fermi surface as a function of Gd$^{3+}$ concentration, which indicates that the 4$f$ magnetism is different from the non-local effects induced by transition metals ($d$ electrons) substitutions. Additionally, we observe an unusual evolution of the Gd$^{3+}$ ESR spectra as a function of the applied magnetic field, which we discuss considering the magnetic interaction between Gd$^{3+}$ 4$f$ electrons and impurity centers such as Se vacancies. This interaction would give rise to a local weak antilocalization effect surrounding the Gd$^{3+}$ ions. Such mechanism is observable due to particular details of the Gd$^{3+}$ 4$f$ electrons magnetism in this system compared to $d$ electrons. Our work points out that rare earth substitutions in this model topological insulator is a promising path to explore the axion insulating systems.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
Magnus Induced Diode Effect for Skyrmions in Channels with Periodic Potentials
Authors:
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
Using a particle based model, we investigate the skyrmion dynamical behavior in a channel where the upper wall contains divots of one depth and the lower wall contains divots of a different depth. Under an applied driving force, skyrmions in the channels move with a finite skyrmion Hall angle that deflects them toward the upper wall for $-x$ direction driving and the lower wall for $+x$ direction…
▽ More
Using a particle based model, we investigate the skyrmion dynamical behavior in a channel where the upper wall contains divots of one depth and the lower wall contains divots of a different depth. Under an applied driving force, skyrmions in the channels move with a finite skyrmion Hall angle that deflects them toward the upper wall for $-x$ direction driving and the lower wall for $+x$ direction driving. When the upper divots have zero height, the skyrmions are deflected against the flat upper wall for $-x$ direction driving and the skyrmion velocity depends linearly on the drive. For $+x$ direction driving, the skyrmions are pushed against the lower divots and become trapped, giving reduced velocities and a nonlinear velocity-force response. When there are shallow divots on the upper wall and deep divots on the lower wall, skyrmions get trapped for both driving directions; however, due to the divot depth difference, skyrmions move more easily under $-x$ direction driving, and become strongly trapped for $+x$ direction driving. The preferred $-x$ direction motion produces what we call a Magnus diode effect since it vanishes in the limit of zero Magnus force, unlike the diode effects observed for asymmetric sawtooth potentials. We show that the transport curves can exhibit a series of jumps or dips, negative differential conductivity, and reentrant pinning due to collective trapping events. We also discuss how our results relate to recent continuum modeling on a similar skyrmion diode system.
△ Less
Submitted 25 August, 2022; v1 submitted 24 August, 2022;
originally announced August 2022.
-
Clogging, Diode and Collective Effects of Skyrmions in Funnel Geometries
Authors:
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
Using a particle-based model, we examine the collective dynamics of skyrmions interacting with a funnel potential under dc driving as the skyrmion density and relative strength of the Magnus and damping terms are varied. For driving in the easy direction, we find that increasing the skyrmion density reduces the average skyrmion velocity due to jamming of skyrmions near the funnel opening, while th…
▽ More
Using a particle-based model, we examine the collective dynamics of skyrmions interacting with a funnel potential under dc driving as the skyrmion density and relative strength of the Magnus and damping terms are varied. For driving in the easy direction, we find that increasing the skyrmion density reduces the average skyrmion velocity due to jamming of skyrmions near the funnel opening, while the Magnus force causes skyrmions to accumulate on one side of the funnel array. For driving in the hard direction, there is a critical skyrmion density below which the skyrmions become trapped. Above this critical value, a clogging effect appears with multiple depinning and repinning states where the skyrmions can rearrange into different clogged configurations, while at higher drives, the velocity-force curves become continuous. When skyrmions pile up near the funnel opening, the effective size of the opening is reduced and the passage of other skyrmions is blocked by the repulsive skyrmion-skyrmion interactions. We observe a strong diode effect in which the critical depinning force is higher and the velocity response is smaller for hard direction driving. As the ratio of Magnus force to dissipative term is varied, the skyrmion velocity varies in a non-linear and non-monotonic way due to the pile up of skyrmions on one side of the funnels. At high Magnus forces, the clogging effect for hard direction driving is diminished.
△ Less
Submitted 25 April, 2022;
originally announced April 2022.
-
Soliton Motion in Skyrmion Chains
Authors:
N. P. Vizarim,
J. C. Bellizotti Souza,
C. J. O. Reichhardt,
C. Reichhardt,
M. V. Milosevic,
P. A. Venegas
Abstract:
Using a particle-based model we examine the depinning motion of solitons in skyrmion chains in quasi-one dimensional (1D) and two-dimensional (2D) systems containing embedded 1D interfaces. The solitons take the form of a particle or hole in a commensurate chain of skyrmions. Under an applied drive, just above a critical depinning threshold the soliton moves with a skyrmion Hall angle of zero. For…
▽ More
Using a particle-based model we examine the depinning motion of solitons in skyrmion chains in quasi-one dimensional (1D) and two-dimensional (2D) systems containing embedded 1D interfaces. The solitons take the form of a particle or hole in a commensurate chain of skyrmions. Under an applied drive, just above a critical depinning threshold the soliton moves with a skyrmion Hall angle of zero. For higher drives, the entire chain depins, and in a 2D system we observe that both the solitons and chain move at zero skyrmion Hall angle and then transition to a finite skyrmion Hall angle as the drive increases. In a 2D system with a 1D interface that is at an angle to the driving direction, there can be a reversal of the sign of the skyrmion Hall angle from positive to negative. Our results suggest that solitons in skyrmion systems could be used as information carriers in racetrack geometries that would avoid the drawbacks of finite skyrmion Hall angles. The soliton states become mobile at significantly lower drives than the depinning transition of the skyrmion chains themselves.
△ Less
Submitted 22 February, 2022;
originally announced February 2022.
-
Slow crystalline electric field fluctuations in the Kondo lattice SmB$_{6}$
Authors:
M. Carlone,
J. C. Souza,
J. Sichelschmidt,
P. F. S. Rosa,
R. R. Urbano,
P. G. Pagliuso,
Z. Fisk,
P. A. Venegas,
P. Schlottmann,
C. Rettori
Abstract:
This work reports on the temperature dependence of the electron spin resonance (ESR) of Gd$^{3+}$-doped SmB$_{6}$ single crystals at X- and Q-band microwave frequencies in different crystallographic directions. We found an anomalous inhomogeneous broadening of the Gd$^{3+}$ ESR linewidth ($ΔH$) within 5.3 K $\leq T \leq$ 12.0 K which is attributed to slow crystalline electric field (CEF) fluctuati…
▽ More
This work reports on the temperature dependence of the electron spin resonance (ESR) of Gd$^{3+}$-doped SmB$_{6}$ single crystals at X- and Q-band microwave frequencies in different crystallographic directions. We found an anomalous inhomogeneous broadening of the Gd$^{3+}$ ESR linewidth ($ΔH$) within 5.3 K $\leq T \leq$ 12.0 K which is attributed to slow crystalline electric field (CEF) fluctuations, slower than the timescale of the ESR microwave frequencies used ($\sim$10 GHz). This linewidth inhomogeneity may be associated to the coupling of the Gd$^{3+}$ $S$-states to the breathing mode of the SmB$_{6}$ cage, and can be simulated by a random distribution of the 4$^{th}$ CEF parameter, $b_4$, that strikingly takes negative and positive values. The temperature at which this inhomogeneity sets in, is related to the onset of a continuous insulator-to-metal phase transition. In addition, based on the interconfigurational fluctuation relaxation model, the observed exponential $T$-dependence of $ΔH$ above $T\simeq$ 10 K gives rise to an excitation energy notably close to the hybridization gap of SmB$_{6}$ ($Δ\simeq$ 60 K). This charge fluctuation scenario provides important ingredients to the physical properties of SmB$_{6}$. We finally discuss the interplay between charge and valence fluctuations under the view of slow CEF fluctuations in SmB$_{6}$ by coupling the Gd$^{3+}$ ions to the breathing phonon mode via a dynamic Jahn-Teller-like mechanism.
△ Less
Submitted 26 January, 2022;
originally announced January 2022.
-
Skyrmion Ratchet in Funnel Geometries
Authors:
J. C. Bellizotti Souza,
N. P. Vizarim,
C. J. O. Reichhardt,
C. Reichhardt,
P. A. Venegas
Abstract:
Using a particle-based model, we simulate the behavior of a skyrmion under the influence of asymmetric funnel geometries and ac driving at zero temperature. We specifically investigate possibilities for controlling the skyrmion motion by harnessing a ratchet effect. Our results show that as the amplitude of a unidirectional ac drive is increased, the skyrmion can be set into motion along either th…
▽ More
Using a particle-based model, we simulate the behavior of a skyrmion under the influence of asymmetric funnel geometries and ac driving at zero temperature. We specifically investigate possibilities for controlling the skyrmion motion by harnessing a ratchet effect. Our results show that as the amplitude of a unidirectional ac drive is increased, the skyrmion can be set into motion along either the easy or hard direction of the funnel depending on the ac driving direction. When the ac drive is parallel to the funnel axis, the skyrmion flows in the easy direction and its average velocity is quantized. In contrast, when the ac drive is perpendicular to the funnel axis, a Magnus-induced ratchet effect occurs, and the skyrmion moves along the hard direction with a constant average velocity. For biharmonic ac driving of equal amplitude along both the parallel and perpendicular directions, we observe a reentrant pinning phase where the skyrmion ratchet vanishes. For asymmetric biharmonic ac drives, the skyrmion exhibits a combination of effects and can move in either the easy or hard direction depending on the configuration of the ac drives. These results indicate that it is possible to achieve controlled skyrmion motion using funnel geometries, and we discuss ways in which this could be harnessed to perform data transfer operations.
△ Less
Submitted 21 May, 2021;
originally announced May 2021.
-
Directional Locking and the Influence of Obstacle Density on Skyrmion Dynamics in Triangular and Honeycomb Arrays
Authors:
N. P. Vizarim,
J. C. Bellizotti Souza,
C. Reichhardt,
C. J. O. Reichhardt,
P. A. Venegas
Abstract:
We numerically examine a single skyrmion dynamics under the influence of triangular and honeycomb obstacle arrays at zero temperature. The skyrmion Hall angle $θ_{sk}$, that is the angle between the applied external drive and the direction of the skyrmion motion, increases in quantized steps or continuously as a function of the applied drive. For the obstacle arrays studied in this work, the skyrm…
▽ More
We numerically examine a single skyrmion dynamics under the influence of triangular and honeycomb obstacle arrays at zero temperature. The skyrmion Hall angle $θ_{sk}$, that is the angle between the applied external drive and the direction of the skyrmion motion, increases in quantized steps or continuously as a function of the applied drive. For the obstacle arrays studied in this work, the skyrmion exhibits two main directional locking effects, where the skyrmion motion locks with $θ_{sk}=-30^\circ$ and $-60^\circ$. We show that these directions are privileged due to the obstacle landscape symmetry, where there are channels that the skyrmion may move with less or no obstacle collisions. Besides that, the skyrmion Hall angles can be modified by changing the obstacle density in the sample, where some dynamic phases may appear, vanish or be stimulated. This interesting behavior can be useful to guide skyrmions using regions with different obstacle densities to set the skyrmion into designed trajectories. We have also investigated for fixed obstacle densities how the phases with $θ_{sk}=-30^\circ$ and $-60^\circ$ evolve as a function of the Magnus force, where possibilities for switching between these phases and topological selection is discussed.
△ Less
Submitted 11 March, 2021;
originally announced March 2021.
-
The SEDIGISM survey: first data release and overview of the Galactic structure
Authors:
F. Schuller,
J. S. Urquhart,
T. Csengeri,
D. Colombo,
A. Duarte-Cabral,
M. Mattern,
A. Ginsburg,
A. R. Pettitt,
F. Wyrowski,
L. Anderson,
F. Azagra,
P. Barnes,
M. Beltran,
H. Beuther,
S. Billington,
L. Bronfman,
R. Cesaroni,
C. Dobbs,
D. Eden,
M. -Y. Lee,
S. -N. X. Medina,
K. M. Menten,
T. Moore,
F. M. Montenegro-Montes,
S. Ragan
, et al. (35 additional authors not shown)
Abstract:
The SEDIGISM (Structure, Excitation and Dynamics of the Inner Galactic Interstellar Medium) survey used the APEX telescope to map 84 deg^2 of the Galactic plane between l = -60 deg and l = +31 deg in several molecular transitions, including 13CO(2-1) and C18O(2-1), thus probing the moderately dense (~10^3 cm^-3) component of the interstellar medium. With an angular resolution of 30'' and a typical…
▽ More
The SEDIGISM (Structure, Excitation and Dynamics of the Inner Galactic Interstellar Medium) survey used the APEX telescope to map 84 deg^2 of the Galactic plane between l = -60 deg and l = +31 deg in several molecular transitions, including 13CO(2-1) and C18O(2-1), thus probing the moderately dense (~10^3 cm^-3) component of the interstellar medium. With an angular resolution of 30'' and a typical 1-sigma sensitivity of 0.8-1.0 K at 0.25 km/s velocity resolution, it gives access to a wide range of structures, from individual star-forming clumps to giant molecular clouds and complexes. The coverage includes a good fraction of the first and fourth Galactic quadrants, allowing us to constrain the large scale distribution of cold molecular gas in the inner Galaxy. In this paper we provide an updated overview of the full survey and the data reduction procedures used. We also assess the quality of these data and describe the data products that are being made publicly available as part of this first data release (DR1). We present integrated maps and position-velocity maps of the molecular gas and use these to investigate the correlation between the molecular gas and the large scale structural features of the Milky Way such as the spiral arms, Galactic bar and Galactic centre. We find that approximately 60 per cent of the molecular gas is associated with the spiral arms and these appear as strong intensity peaks in the derived Galactocentric distribution. We also find strong peaks in intensity at specific longitudes that correspond to the Galactic centre and well known star forming complexes, revealing that the 13CO emission is concentrated in a small number of complexes rather than evenly distributed along spiral arms.
△ Less
Submitted 2 December, 2020;
originally announced December 2020.
-
The SEDIGISM survey: Molecular clouds in the inner Galaxy
Authors:
A. Duarte-Cabral,
D. Colombo,
J. S. Urquhart,
A. Ginsburg,
D. Russeil,
F. Schuller,
L. D. Anderson,
P. J. Barnes,
M. T. Beltran,
H. Beuther,
S. Bontemps,
L. Bronfman,
T. Csengeri,
C. L. Dobbs,
D. Eden,
A. Giannetti,
J. Kauffmann,
M. Mattern,
S. -N. X. Medina,
K. M. Menten,
M. -Y. Lee,
A. R. Pettitt,
M. Riener,
A. J. Rigby,
A. Trafficante
, et al. (35 additional authors not shown)
Abstract:
We use the 13CO(2-1) emission from the SEDIGISM high-resolution spectral-line survey of the inner Galaxy, to extract the molecular cloud population with a large dynamic range in spatial scales, using the SCIMES algorithm. This work compiles a cloud catalogue with a total of 10663 molecular clouds, 10300 of which we were able to assign distances and compute physical properties. We study some of the…
▽ More
We use the 13CO(2-1) emission from the SEDIGISM high-resolution spectral-line survey of the inner Galaxy, to extract the molecular cloud population with a large dynamic range in spatial scales, using the SCIMES algorithm. This work compiles a cloud catalogue with a total of 10663 molecular clouds, 10300 of which we were able to assign distances and compute physical properties. We study some of the global properties of clouds using a science sample, consisting of 6664 well resolved sources and for which the distance estimates are reliable. In particular, we compare the scaling relations retrieved from SEDIGISM to those of other surveys, and we explore the properties of clouds with and without high-mass star formation. Our results suggest that there is no single global property of a cloud that determines its ability to form massive stars, although we find combined trends of increasing mass, size, surface density and velocity dispersion for the sub-sample of clouds with ongoing high-mass star formation. We then isolate the most extreme clouds in the SEDIGISM sample (i.e. clouds in the tails of the distributions) to look at their overall Galactic distribution, in search for hints of environmental effects. We find that, for most properties, the Galactic distribution of the most extreme clouds is only marginally different to that of the global cloud population. The Galactic distribution of the largest clouds, the turbulent clouds and the high-mass star-forming clouds are those that deviate most significantly from the global cloud population. We also find that the least dynamically active clouds (with low velocity dispersion or low virial parameter) are situated further afield, mostly in the least populated areas. However, we suspect that part of these trends may be affected by some observational biases, and thus require further follow up work in order to be confirmed.
△ Less
Submitted 2 December, 2020;
originally announced December 2020.
-
Metallic islands in the Kondo insulator SmB$_{6}$
Authors:
J. C. Souza,
P. F. S. Rosa,
J. Sichelschmidt,
M. Carlone,
P. A. Venegas,
M. O. Malcolms,
P. M. Menegasso,
R. R. Urbano,
Z. Fisk,
P. G. Pagliuso
Abstract:
The predicted interplay between Kondo physics and non-trivial topology in SmB$_{6}$ has stimulated many experimental reports, some of which are in apparent contradiction. The origin of the dispute may lie on the fragility of the Kondo insulating phase in the presence of Sm vacancies (Kondo holes) and/or natural impurities, such as Gd$^{3+}$. In this work, we locally investigated this fragility for…
▽ More
The predicted interplay between Kondo physics and non-trivial topology in SmB$_{6}$ has stimulated many experimental reports, some of which are in apparent contradiction. The origin of the dispute may lie on the fragility of the Kondo insulating phase in the presence of Sm vacancies (Kondo holes) and/or natural impurities, such as Gd$^{3+}$. In this work, we locally investigated this fragility for Al-flux grown Sm$_{1-x}$Gd$_{x}$B$_{6}$ single crystals (0 $\leq$ $x$ $\leq$ 0.02) by combining electron spin resonance (ESR) and complementary bulk measurements. The Gd$^{3+}$ ESR spectra in a highly dilute regime ($x$ $\sim 0.0004$) display the features of an insulating cubic environment. Remarkably, a metallic ESR lineshape is observed for more concentrated samples ($x$ $\geq$ 0.004), even though these systems are still in a reasonably dilute regime and show insulating $dc$ electrical resistivity. Our data indicate that the Kondo insulating state is destroyed locally around impurities before a global percolation occurs. This result not only explains the discrepancy between $dc$ and $ac$ conductivity, but also provides a scenario to explain the presence of quantum oscillations in magnetization in the absence of quantum oscillations in electrical resistivity.
△ Less
Submitted 7 October, 2020;
originally announced October 2020.
-
Guided Skyrmion Motion Along Pinning Array Interfaces
Authors:
N. P. Vizarim,
C. Reichhardt,
P. A. Venegas,
C. J. O. Reichhardt
Abstract:
We examine ac driven skyrmions interacting with the interface between two different obstacle array structures. We consider drive amplitudes at which skyrmions in a bulk obstacle lattice undergo only localized motion and show that when an obstacle lattice interface is introduced, directed skyrmion transport can occur along the interface. The skyrmions can be guided by a straight interface and can a…
▽ More
We examine ac driven skyrmions interacting with the interface between two different obstacle array structures. We consider drive amplitudes at which skyrmions in a bulk obstacle lattice undergo only localized motion and show that when an obstacle lattice interface is introduced, directed skyrmion transport can occur along the interface. The skyrmions can be guided by a straight interface and can also turn corners to follow the interface. For a square obstacle lattice embedded in a square pinning array with a larger lattice constant, we find that skyrmions can undergo transport in all four primary symmetry directions under the same fixed ac drive. We map where localized or translating motion occurs as a function of the ac driving parameters. Our results suggest a new method for controlling skyrmion motion based on transport along obstacle lattice interfaces.
△ Less
Submitted 28 August, 2020;
originally announced August 2020.
-
Skyrmion Pinball and Directed Motion on Obstacle Arrays
Authors:
N. P. Vizarim,
C. J. O. Reichhardt,
P. A. Venegas,
C. Reichhardt
Abstract:
We examine skyrmions interacting with a square array of obstacles under ac drives applied in one or two directions. For a single direction of ac driving, we find that the Magnus force in conjunction with the obstacle interactions can create elliptical skyrmion orbits of increasing size, leading to localized phases, chaotic phases, and translating or ratcheting orbits. Under two ac drives that are…
▽ More
We examine skyrmions interacting with a square array of obstacles under ac drives applied in one or two directions. For a single direction of ac driving, we find that the Magnus force in conjunction with the obstacle interactions can create elliptical skyrmion orbits of increasing size, leading to localized phases, chaotic phases, and translating or ratcheting orbits. Under two ac drives that are out of phase by $90^\circ$ and applied in two directions, the skyrmions form localized commensurate orbits that encircle an integer number of obstacles, similar to the electron pinball effect observed for electrons in antidot lattices. As a function of ac amplitude, Magnus force strength, and obstacle size, we find that chaotic scattering regimes and directed motion can emerge even in the absence of asymmetry in the substrate. The directed motion follows different symmetry axes of the periodic substrate, and we observe a variety of reversed ratchet effects. The Magnus force in the skyrmion system produces a significantly larger number of directed motion regimes than are exhibited by overdamped systems. We discuss how these results could be used to move skyrmions in a controlled way for possible applications.
△ Less
Submitted 22 April, 2020;
originally announced April 2020.
-
Skyrmion Dynamics and Transverse Mobility: Skyrmion Hall Angle Reversal on 2D Periodic Substrates with dc and Biharmonic ac Drives
Authors:
N. P. Vizarim,
C. J. O. Reichhardt,
P. A. Venegas,
C. Reichhardt
Abstract:
We numerically examine the dynamics of a skyrmion interacting with a two-dimensional periodic substrate under dc and biharmonic ac drives. We show that the Magnus force of the skyrmion produces circular orbits that can resonate with the ac drive and the periodicity of the substrate to create quantized motion both parallel and perpendicular to the dc drive. The skyrmion Hall angle exhibits a series…
▽ More
We numerically examine the dynamics of a skyrmion interacting with a two-dimensional periodic substrate under dc and biharmonic ac drives. We show that the Magnus force of the skyrmion produces circular orbits that can resonate with the ac drive and the periodicity of the substrate to create quantized motion both parallel and perpendicular to the dc drive. The skyrmion Hall angle exhibits a series of increasing and/or decreasing steps along with strongly fluctuating regimes. In the phase locked regimes, the skyrmion Hall angle is constant and the skyrmion motion consists of periodic orbits encircling an integer number of obstacles per every or every other ac drive cycle. We also observe phases in which the skyrmion moves at $90^\circ$ with respect to the driving direction even in the presence of damping, a phenomenon called absolute transverse mobility that can exhibit reentrance as a function of dc drive. When the biharmonic ac drives have different amplitudes, in the two directions we find regimes in which the skyrmion Hall angle shows a sign reversal from positive to negative, as well as a reentrant pinning effect in which the skyrmion is mobile at low drives but becomes pinned at higher drives. These behaviors arise due to the combination of the Magnus force with the periodic motion of the skyrmions, which produce Shapiro steps, directional locking, and ratchet effects.
△ Less
Submitted 12 March, 2020;
originally announced March 2020.
-
Shapiro Steps and Nonlinear Skyrmion Hall Angles For dc and ac Driven Skyrmions on a Two Dimensional Periodic Substrate
Authors:
N. P. Vizarim,
C. Reichhardt,
P. A. Venegas,
C. J. O. Reichhardt
Abstract:
For an overdamped particle moving over a two-dimensional periodic substrate under combined dc and ac drives, a series of steps can appear in the velocity force curves that are known as Shapiro steps. Here we show that for skyrmions driven over a two-dimensional periodic obstacle array with a dc drive and an ac drive that is either parallel or perpendicular to the dc drive, the system exhibits nume…
▽ More
For an overdamped particle moving over a two-dimensional periodic substrate under combined dc and ac drives, a series of steps can appear in the velocity force curves that are known as Shapiro steps. Here we show that for skyrmions driven over a two-dimensional periodic obstacle array with a dc drive and an ac drive that is either parallel or perpendicular to the dc drive, the system exhibits numerous transverse and longitudinal synchronization dynamics due to the Magnus force. These phenomena originate in interactions between two different types of phase locking effects: Shapiro steps and directional locking. In some cases, the skyrmion Hall angle is constant but longitudinal Shapiro steps appear, while in other regimes the skyrmion Hall angle can either increase or decrease with increasing dc drive during the phase locking as the skyrmion locks to different symmetry directions of the obstacle lattice. For a transverse ac drive we find that strong Hall angle overshoots can occur in certain locked phases where the skyrmion is moving at an angle that is considerably larger than the intrinsic Hall angle. For the strongest Magnus force, the phase locking effects are reduced and there are larger regions of disordered dynamics. We show that the skyrmion Hall angle can be controlled by fixing the dc drive and changing the amplitude of the ac drive.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
Skyrmion Dynamics and Topological Sorting on Periodic Obstacle Arrays
Authors:
N. P. Vizarim,
C. Reichhardt,
C. J. O. Reichhardt,
P. A. Venegas
Abstract:
We examine skyrmions under a dc drive interacting with a square array of obstacles for varied obstacle size and damping. When the drive is applied in a fixed direction, we find that the skyrmions are initially guided in the drive direction but also move transverse to the drive due to the Magnus force. The skyrmion Hall angle, which indicates the difference between the skyrmion direction of motion…
▽ More
We examine skyrmions under a dc drive interacting with a square array of obstacles for varied obstacle size and damping. When the drive is applied in a fixed direction, we find that the skyrmions are initially guided in the drive direction but also move transverse to the drive due to the Magnus force. The skyrmion Hall angle, which indicates the difference between the skyrmion direction of motion and the drive direction, increases with drive in a series of quantized steps as a result of the locking of the skyrmion motion to specific symmetry directions of the obstacle array. On these steps, the skyrmions collide with an integer number of obstacles to create a periodic motion. The transitions between the different locking steps are associated with jumps or dips in the velocity-force curves. In some regimes, the skyrmion Hall angle is actually higher than the intrinsic skyrmion Hall angle that would appear in the absence of obstacles. In the limit of zero damping, the skyrmion Hall angle is 90$^\circ$, and we find that it decreases as the damping increases. For multiple interacting skyrmion species in the collective regime, we find jammed behavior at low drives where the different skyrmion species are strongly coupled and move in the same direction. As the drive increases, the species decouple and each can lock to a different symmetry direction of the obstacle lattice, making it possible to perform topological sorting in analogy to the particle sorting methods used to fractionate different species of colloidal particles moving over two-dimensional obstacle arrays.
△ Less
Submitted 23 January, 2020;
originally announced January 2020.
-
Mathematical analysis and numerical solution of models with dynamic Preisach hysteresis
Authors:
A. Bermúdez,
D. Gómez,
P. Venegas
Abstract:
Hysteresis is a phenomenon that is observed in a great variety of physical systems, which leads to a nonlinear and multivalued behavior, making their modeling and control difficult. Even though the analysis and mathematical properties of classical or rate-independent hysteresis models are known, this is not the case for dynamic models where current approaches lack a proper functional analytic fram…
▽ More
Hysteresis is a phenomenon that is observed in a great variety of physical systems, which leads to a nonlinear and multivalued behavior, making their modeling and control difficult. Even though the analysis and mathematical properties of classical or rate-independent hysteresis models are known, this is not the case for dynamic models where current approaches lack a proper functional analytic framework which is essential to formulate optimization problems and develop stable numerics, both being crucial in practice. This paper deals with the description and mathematical analysis of the dynamic Preisach hysteresis model. Toward that end, we complete a widely accepted definition of the dynamic model commonly used to describe the constitutive relation between the magnetic field H and the magnetic induction B, in which, the values of B not only depends on the present values of H but also on the past history and its velocity. We first analyze mathematically some important properties of the model and compare them with known results for the static Preisach model. Then, we consider a parabolic problem with dynamic hysteresis motivated by electromagnetic field equations. Under suitable assumptions, we show the well posedness of a weak formulation of the problem and solve it numerically.
Finally, we report a numerical test in order to assess the order of convergence and to illustrate the behavior of the numerical solution for different configurations of the dynamic Preisach model
△ Less
Submitted 21 February, 2019;
originally announced February 2019.
-
Controlling the Kelvin Force: Basic Strategies and Applications to Magnetic Drug Targeting
Authors:
Harbir Antil,
Ricardo H. Nochetto,
Pablo Venegas
Abstract:
Motivated by problems arising in magnetic drug targeting, we propose to generate an almost constant Kelvin (magnetic) force in a target subdomain, moving along a prescribed trajectory. This is carried out by solving a minimization problem with a tracking type cost functional. The magnetic sources are assumed to be dipoles and the control variables are the magnetic field intensity, the source locat…
▽ More
Motivated by problems arising in magnetic drug targeting, we propose to generate an almost constant Kelvin (magnetic) force in a target subdomain, moving along a prescribed trajectory. This is carried out by solving a minimization problem with a tracking type cost functional. The magnetic sources are assumed to be dipoles and the control variables are the magnetic field intensity, the source location and the magnetic field direction. The resulting magnetic field is shown to effectively steer the drug concentration, governed by a drift-diffusion PDE, from an initial to a desired location with limited spreading.
△ Less
Submitted 22 April, 2017;
originally announced April 2017.
-
SEDIGISM: Structure, excitation, and dynamics of the inner Galactic interstellar medium
Authors:
F. Schuller,
T. Csengeri,
J. S. Urquhart,
A. Duarte-Cabral,
P. J. Barnes,
A. Giannetti,
A. K. Hernandez,
S. Leurini,
M. Mattern,
S. -N. X. Medina,
C. Agurto,
F. Azagra,
L. D. Anderson,
M. T. Beltrán,
H. Beuther,
S. Bontemps,
L. Bronfman,
C. L. Dobbs,
M. Dumke,
R. Finger,
A. Ginsburg,
E. Gonzalez,
T. Henning,
J. Kauffmann,
F. Mac-Auliffe
, et al. (19 additional authors not shown)
Abstract:
The origin and life-cycle of molecular clouds are still poorly constrained, despite their importance for understanding the evolution of the interstellar medium. We have carried out a systematic, homogeneous, spectroscopic survey of the inner Galactic plane, in order to complement the many continuum Galactic surveys available with crucial distance and gas-kinematic information. Our aim is to combin…
▽ More
The origin and life-cycle of molecular clouds are still poorly constrained, despite their importance for understanding the evolution of the interstellar medium. We have carried out a systematic, homogeneous, spectroscopic survey of the inner Galactic plane, in order to complement the many continuum Galactic surveys available with crucial distance and gas-kinematic information. Our aim is to combine this data set with recent infrared to sub-millimetre surveys at similar angular resolutions. The SEDIGISM survey covers 78 deg^2 of the inner Galaxy (-60 deg < l < +18 deg, |b| < 0.5 deg) in the J=2-1 rotational transition of 13CO. This isotopologue of CO is less abundant than 12CO by factors up to 100. Therefore, its emission has low to moderate optical depths, and higher critical density, making it an ideal tracer of the cold, dense interstellar medium. The data have been observed with the SHFI single-pixel instrument at APEX. The observational setup covers the 13CO(2-1) and C18O(2-1) lines, plus several transitions from other molecules. The observations have been completed. Data reduction is in progress, and the final data products will be made available in the near future. Here we give a detailed description of the survey and the dedicated data reduction pipeline. Preliminary results based on a science demonstration field covering -20 deg < l < -18.5 deg are presented. Analysis of the 13CO(2-1) data in this field reveals compact clumps, diffuse clouds, and filamentary structures at a range of heliocentric distances. By combining our data with data in the (1-0) transition of CO isotopologues from the ThrUMMS survey, we are able to compute a 3D realization of the excitation temperature and optical depth in the interstellar medium. Ultimately, this survey will provide a detailed, global view of the inner Galactic interstellar medium at an unprecedented angular resolution of ~30".
△ Less
Submitted 17 January, 2017;
originally announced January 2017.
-
Optimizing the Kelvin force in a moving target subdomain
Authors:
Harbir Antil,
Ricardo H. Nochetto,
Pablo Venegas
Abstract:
In order to generate a desired Kelvin (magnetic) force in a target subdomain moving along a prescribed trajectory, we propose a minimization problem with a tracking type cost functional. We use the so-called dipole approximation to realize the magnetic field, where the location and the direction of the magnetic sources are assumed to be fixed. The magnetic field intensity acts as the control and e…
▽ More
In order to generate a desired Kelvin (magnetic) force in a target subdomain moving along a prescribed trajectory, we propose a minimization problem with a tracking type cost functional. We use the so-called dipole approximation to realize the magnetic field, where the location and the direction of the magnetic sources are assumed to be fixed. The magnetic field intensity acts as the control and exhibits limiting pointwise constraints. We address two specific problems: the first one corresponds to a fixed final time whereas the second one deals with an unknown force to minimize the final time. We prove existence of solutions and deduce local uniqueness provided that a second order sufficient condition is valid. We use the classical backward Euler scheme for time discretization. For both problems we prove the $H^1$-weak convergence of this semi-discrete numerical scheme. This result is motivated by $Γ$-convergence and does not require second order sufficient condition. If the latter holds then we prove $H^1$-strong local convergence. We report computational results to assess the performance of the numerical methods. As an application, we study the control of magnetic nanoparticles as those used in magnetic drug delivery, where the optimized Kelvin force is used to transport the drug to a desired location.
△ Less
Submitted 22 December, 2016; v1 submitted 22 December, 2016;
originally announced December 2016.
-
Collapse of the $Gd^{3+}$ ESR fine structure throughout the coherent temperature of the Gd-doped Kondo Semiconductor $CeFe_{4}P_{12}$
Authors:
P. A. Venegas,
F. A. Garcia,
D. J. Garcia,
G. Cabrera,
M. A. Avila,
C. Rettori
Abstract:
Experiments on the $Gd^{3+}$ Electron Spin Resonance (ESR) in the filled skutterudite $Ce_{1-x}Gd_{x}Fe_{4}P_{12}$ ($x \approx 0.001$), at temperatures where the host resistivity manifests a smooth insulator-metal crossover, provides evidence of the underlying Kondo physics associated with this system. At low temperatures (below $T \approx K$), $Ce_{1-x}Gd_{x}Fe_{4}P_{12}$ behaves as a Kondo-insul…
▽ More
Experiments on the $Gd^{3+}$ Electron Spin Resonance (ESR) in the filled skutterudite $Ce_{1-x}Gd_{x}Fe_{4}P_{12}$ ($x \approx 0.001$), at temperatures where the host resistivity manifests a smooth insulator-metal crossover, provides evidence of the underlying Kondo physics associated with this system. At low temperatures (below $T \approx K$), $Ce_{1-x}Gd_{x}Fe_{4}P_{12}$ behaves as a Kondo-insulator with a relatively large hybridization gap, and the $Gd^{3+}$ ESR spectra displays a fine structure with lorentzian line shape, typical of insulating media. The electronic gap is attributed to the large hybridization present in the coherent regime of a Kondo lattice, when Ce 4f-electrons cooperate with band properties at half-filling. Mean-field calculations suggest that the electron-phonon interaction is fundamental at explaining the strong 4f-electron hybridization in this filled skutterudite. The resulting electronic structure is strongly temperature dependent, and at about $T^{*} \approx 160 K$ the system undergoes an insulator-to-metal transition induced by the withdrawal of 4f-electrons from the Fermi volume, the system becoming metallic and non-magnetic. The $Gd^{3+}$ ESR fine structure coalesces into a single dysonian resonance, as in metals. Still, our simulations suggest that exchange-narrowing via the usual Korringa mechanism, alone, is not capable of describing the thermal behavior of the ESR spectra in the entire temperature region ($4.2$ - $300$ K). We propose that temperature activated fluctuating-valence of the Ce ions is the missing ingredient that, added to the usual exchange-narrowing mechanism, fully describes this unique temperature dependence of the $Gd^{3+}$ ESR fine structure observed in $Ce_{1-x}Gd_{x}Fe_{4}P_{12}$.
△ Less
Submitted 15 July, 2016;
originally announced July 2016.
-
Critical Currents and Melting Temperature of a Two-dimensional Vortex Lattice with Periodic Pinning
Authors:
L. G. Verga,
M. M. Bonilha,
M. Carlone,
P. A. Venegas
Abstract:
The critical current and melting temperature of a vortex system are analyzed. Calculations are made for a two dimensional film at finite temperature with two kinds of periodic pinning: hexagonal and Kagomé. A transport current parallel and perpendicular to the main axis of the pinning arrays is applied and molecular dynamics simulations are used to calculate the vortex velocities to obtain the cri…
▽ More
The critical current and melting temperature of a vortex system are analyzed. Calculations are made for a two dimensional film at finite temperature with two kinds of periodic pinning: hexagonal and Kagomé. A transport current parallel and perpendicular to the main axis of the pinning arrays is applied and molecular dynamics simulations are used to calculate the vortex velocities to obtain the critical currents. The structure factor and displacements of vortices at zero transport current are used to obtain the melting temperature for both pinning arrays. The critical currents are higher for the hexagonal pinning lattice and anisotropic for both pinning arrays. This anisotropy is stronger with temperature for the hexagonal array. For the Kagomé pinning lattice, our analysis shows a multi stage phase melting; that is, as we increase the temperature, each different dynamic phase melts before reaching the melting temperature. Both the melting temperature and critical currents are larger for the hexagonal lattice, indicating the role for the interstitial vortices in decreasing the pinning strength.
△ Less
Submitted 7 November, 2012;
originally announced November 2012.
-
Role of Interstitial Pinning in the Dynamical Phases of Vortices in Superconducting Films
Authors:
R. P. Simões,
P. A. Venegas,
D. F. Mello
Abstract:
We analyze the vortex dynamics in superconducting thin films with a periodic array of pinning centers. In particular, we study the effect of anisotropy for a Kagomé pinning network when longitudinal and transverse transport currents are applied. By solving the equations of motion for the vortex array numerically at zero temperature we find different phases for the vortex dynamics depending on the…
▽ More
We analyze the vortex dynamics in superconducting thin films with a periodic array of pinning centers. In particular, we study the effect of anisotropy for a Kagomé pinning network when longitudinal and transverse transport currents are applied. By solving the equations of motion for the vortex array numerically at zero temperature we find different phases for the vortex dynamics depending on the pinning and driving force. An unusual sequence of peaks along and perpendicular to the main hexagonal lattice axes is observed for the differential resistance reflecting the anisotropy of the transport properties and the complex behavior of the vortex system. This behavior may be understood in terms of interstitial pinning vacancies, which create channels of vortices with different pinning strength.
△ Less
Submitted 21 December, 2011;
originally announced December 2011.
-
The Effects of Pinning on Critical Currents of Superconducting Films
Authors:
R. P. Simões,
P. A. Venegas,
D. F. Mello
Abstract:
Using molecular dynamics simulations, we analyze the effects of artificial periodic arrays of pinning sites on the critical current of superconducting thin films as a function of vortex density. We analyze two types of periodic pinning arrays: hexagonal and Kagomé. For the Kagome pinning network we calculate, using two directions of transport current: longitudinal and transversal. Our results show…
▽ More
Using molecular dynamics simulations, we analyze the effects of artificial periodic arrays of pinning sites on the critical current of superconducting thin films as a function of vortex density. We analyze two types of periodic pinning arrays: hexagonal and Kagomé. For the Kagome pinning network we calculate, using two directions of transport current: longitudinal and transversal. Our results show that the hexagonal pinning array presents higher critical currents than Kagomé and random pinning configuration for all vortex densities. In addition, the Kagomé network shows anisotropy in their transport properties.
△ Less
Submitted 19 December, 2011;
originally announced December 2011.
-
Thermally activated exchange narrowing of the Gd3+ ESR fine structure in a single crystal of Ce1-xGdxFe4P12 (x = 0.001) skutterudite
Authors:
F. A. Garcia,
P. A. Venegas,
P. G. Pagliuso,
C. Rettori,
Z. Fisk,
P. Schlottmann,
S. B. Oseroff
Abstract:
We report electron spin resonance (ESR) measurements in the Gd3+ doped semiconducting filled skutterudite compound Ce1-xGdxFe4P12 (x = 0.001). As the temperature T varies from T = 150 K to T = 165 K, the Gd3+ ESR fine and hyperfine structures coalesce into a broad inhomogeneous single resonance. At T = 200 K the line narrows and as T increases further, the resonance becomes homogeneous with a ther…
▽ More
We report electron spin resonance (ESR) measurements in the Gd3+ doped semiconducting filled skutterudite compound Ce1-xGdxFe4P12 (x = 0.001). As the temperature T varies from T = 150 K to T = 165 K, the Gd3+ ESR fine and hyperfine structures coalesce into a broad inhomogeneous single resonance. At T = 200 K the line narrows and as T increases further, the resonance becomes homogeneous with a thermal broadening of 1.1(2) Oe/K. These results suggest that the origin of these features may be associated to a subtle interdependence of thermally activated mechanisms that combine: i) an increase with T of the density of activated conduction-carriers across the T-dependent semiconducting pseudogap; ii) the Gd3+ Korringa relaxation process due to an exchange interaction, J_{fd}S.s, between the Gd3+ localized magnetic moments and the thermally activated conduction-carriers and; iii) a relatively weak confining potential of the rare-earth ions inside the oversized (Fe2P3)4 cage, which allows the rare-earths to become rattler Einstein oscillators above T = 148 K. We argue that the rattling of the Gd3+ ions, via a motional narrowing mechanism, also contributes to the coalescence of the ESR fine and hyperfine structure.
△ Less
Submitted 15 August, 2011;
originally announced August 2011.
-
Vortex Lattice and Matching Fields for a Long Superconducting Wire
Authors:
Pablo A. Venegas,
Edson Sardella
Abstract:
We investigate the flux penetration patterns and matching fields of a long cylindrical wire of circular cross section in the presence of an external magnetic field. For this study we write the London theory for a long cylinder both for the mixed and Meissner state, with boundary conditions appropriate for this geometry. Using the Monte Carlo Simulated Annealing method, the free energy of the mix…
▽ More
We investigate the flux penetration patterns and matching fields of a long cylindrical wire of circular cross section in the presence of an external magnetic field. For this study we write the London theory for a long cylinder both for the mixed and Meissner state, with boundary conditions appropriate for this geometry. Using the Monte Carlo Simulated Annealing method, the free energy of the mixed state is minimized with respect to the vortex position and we obtain the ground state of the vortex lattice for N=3 up to 18 vortices. The free energy of the Meissner and mixed state provides expressions for the matching fields. We find that, as in the case of samples of different geometry, the finite size effect provokes a delay on the vortex penetration and a vortex accumulation in the center of the sample. The vortex patterns obtained are in good agreement with experimental results.
△ Less
Submitted 14 April, 1998;
originally announced April 1998.
-
Exchange Narrowing Effects in the EPR Linewidth of Gd Diluted in Ce Compounds
Authors:
Pablo A. Venegas,
Paulo R. S. Netto
Abstract:
Anomalous thermal behavior on the EPR linewidths of Gd impurities diluted in Ce compounds has been observed. In metals, the local magnetic moment EPR linewidth, ΔH, is expected to increase linearly with the temperature. In contrast, in Ce_{x}La_{1-x}Os_{2} the Gd EPR spectra show a nonlinear increase. In this work, the mechanisms that are responsible for the thermal behavior of the EPR lines in…
▽ More
Anomalous thermal behavior on the EPR linewidths of Gd impurities diluted in Ce compounds has been observed. In metals, the local magnetic moment EPR linewidth, ΔH, is expected to increase linearly with the temperature. In contrast, in Ce_{x}La_{1-x}Os_{2} the Gd EPR spectra show a nonlinear increase. In this work, the mechanisms that are responsible for the thermal behavior of the EPR lines in Ce_{x}La_{1-x}Os_{2} are examined. We show that the exchange interaction between the local magnetic moments and the conduction electrons are responsible for the narrowing of the spectra at low temperatures. At high temperatures, the contribution to the linewidth of the exchange interaction between the local magnetic moments and the $Ce$ ions has an exponential dependence on the excitation energy of the intermediate valent ions. A complete fitting of the EPR spectra for powdered samples is obtained.
△ Less
Submitted 2 March, 1998;
originally announced March 1998.