-
PoseBench3D: A Cross-Dataset Analysis Framework for 3D Human Pose Estimation
Authors:
Saad Manzur,
Bryan Vela,
Brandon Vela,
Aditya Agrawal,
Lan-Anh Dang-Vu,
David Li,
Wayne Hayes
Abstract:
Reliable three-dimensional human pose estimation is becoming increasingly important for real-world applications, yet much of prior work has focused solely on the performance within a single dataset. In practice, however, systems must adapt to diverse viewpoints, environments, and camera setups -- conditions that differ significantly from those encountered during training, which is often the case i…
▽ More
Reliable three-dimensional human pose estimation is becoming increasingly important for real-world applications, yet much of prior work has focused solely on the performance within a single dataset. In practice, however, systems must adapt to diverse viewpoints, environments, and camera setups -- conditions that differ significantly from those encountered during training, which is often the case in real-world scenarios. To address these challenges, we present a standardized testing environment in which each method is evaluated on a variety of datasets, ensuring consistent and fair cross-dataset comparisons -- allowing for the analysis of methods on previously unseen data. Therefore, we propose PoseBench3D, a unified framework designed to systematically re-evaluate prior and future models across four of the most widely used datasets for human pose estimation -- with the framework able to support novel and future datasets as the field progresses. Through a unified interface, our framework provides datasets in a pre-configured yet easily modifiable format, ensuring compatibility with diverse model architectures. We re-evaluated the work of 18 methods, either trained or gathered from existing literature, and reported results using both Mean Per Joint Position Error (MPJPE) and Procrustes Aligned Mean Per Joint Position Error (PA-MPJPE) metrics, yielding more than 100 novel cross-dataset evaluation results. Additionally, we analyze performance differences resulting from various pre-processing techniques and dataset preparation parameters -- offering further insight into model generalization capabilities.
△ Less
Submitted 16 May, 2025;
originally announced May 2025.
-
Mapping of Microstructure Transitions during Rapid Alloy Solidification Using Bayesian-Guided Phase-Field Simulations
Authors:
José Mancias,
Brent Vela,
Juan Flórez-Coronel,
Rouhollah Tavakoli,
Douglas Allaire,
Raymundo Arróyave,
Damien Tourret
Abstract:
This study addresses microstructure selection mechanisms in rapid solidification, specifically targeting the transition from cellular/dendritic to planar interface morphologies under conditions relevant to additive manufacturing. We use a phase-field model that quantitatively captures solute trapping, kinetic undercooling, and morphological instabilities across a broad range of growth velocities (…
▽ More
This study addresses microstructure selection mechanisms in rapid solidification, specifically targeting the transition from cellular/dendritic to planar interface morphologies under conditions relevant to additive manufacturing. We use a phase-field model that quantitatively captures solute trapping, kinetic undercooling, and morphological instabilities across a broad range of growth velocities ($V$) and thermal gradients ($G$), and apply it to a binary Fe-Cr alloy, as a surrogate for 316L stainless steel. By combining high-fidelity phase-field simulations with a Gaussian Process-based Bayesian active learning approach, we efficiently map the microstructure transitions in the multi-dimensional space of composition, growth velocity, and temperature gradient. We compare our PF results to classical theories for rapid solidification. The classical KGT model yields an accurate prediction of the value of $G$ above which the interface is planar for any growth velocity. Microstructures transition from dendrites to cells as the temperature gradient increases close to this value of $G$. We also identify the occurrence of unstable "intermediate" microstructures at the border between dendritic and planar at low $G$, in the absence of banding instability in this Fe-Cr alloy. Our results highlight the capabilities of Bayesian-guided PF approaches in exploring complex microstructural transitions in multidimensional parameters spaces, thereby providing a robust computational tool for designing process parameters to achieve targeted microstructures and properties in rapidly solidified metallic alloys.
△ Less
Submitted 2 June, 2025; v1 submitted 12 May, 2025;
originally announced May 2025.
-
Physical Layer Authentication With Colored RIS in Visible Light Communications
Authors:
Besra Cetindere Vela,
Serkan Vela,
Stefano Tomasin
Abstract:
We study a visible light communication (VLC) system that employs a colored reconfigurable intelligent surface (CRIS) based on dichroic mirrors that reflect light at tunable frequencies. A verifier can use the CRIS to authenticate transmissions by comparing received multicolor power profiles with expected patterns. Four CRIS configuration strategies are evaluated: a deterministic cyclic pattern, st…
▽ More
We study a visible light communication (VLC) system that employs a colored reconfigurable intelligent surface (CRIS) based on dichroic mirrors that reflect light at tunable frequencies. A verifier can use the CRIS to authenticate transmissions by comparing received multicolor power profiles with expected patterns. Four CRIS configuration strategies are evaluated: a deterministic cyclic pattern, static random reflectance, dynamic random reflectance, and dynamic random permutation of fixed profiles. Randomized configurations, especially dynamic ones, achieve superior authentication, enabling a novel challenge-response physical-layer authentication scheme over CRIS.
△ Less
Submitted 18 April, 2025;
originally announced April 2025.
-
Physics-Informed Gaussian Process Classification for Constraint-Aware Alloy Design
Authors:
Christofer Hardcastle,
Ryan O Mullan,
Raymundo Arroyave,
Brent Vela
Abstract:
Alloy design can be framed as a constraint-satisfaction problem. Building on previous methodologies, we propose equipping Gaussian Process Classifiers (GPCs) with physics-informed prior mean functions to model the boundaries of feasible design spaces. Through three case studies, we highlight the utility of informative priors for handling constraints on continuous and categorical properties. (1) Ph…
▽ More
Alloy design can be framed as a constraint-satisfaction problem. Building on previous methodologies, we propose equipping Gaussian Process Classifiers (GPCs) with physics-informed prior mean functions to model the boundaries of feasible design spaces. Through three case studies, we highlight the utility of informative priors for handling constraints on continuous and categorical properties. (1) Phase Stability: By incorporating CALPHAD predictions as priors for solid-solution phase stability, we enhance model validation using a publicly available XRD dataset. (2) Phase Stability Prediction Refinement: We demonstrate an in silico active learning approach to efficiently correct phase diagrams. (3) Continuous Property Thresholds: By embedding priors into continuous property models, we accelerate the discovery of alloys meeting specific property thresholds via active learning. In each case, integrating physics-based insights into the classification framework substantially improved model performance, demonstrating an efficient strategy for constraint-aware alloy design.
△ Less
Submitted 16 February, 2025;
originally announced February 2025.
-
Towards Autonomous Experimentation: Bayesian Optimization over Problem Formulation Space for Accelerated Alloy Development
Authors:
Danial Khatamsaz,
Joseph Wagner,
Brent Vela,
Raymundo Arroyave,
Douglas L. Allaire
Abstract:
Accelerated discovery in materials science demands autonomous systems capable of dynamically formulating and solving design problems. In this work, we introduce a novel framework that leverages Bayesian optimization over a problem formulation space to identify optimal design formulations in line with decision-maker preferences. By mapping various design scenarios to a multi attribute utility funct…
▽ More
Accelerated discovery in materials science demands autonomous systems capable of dynamically formulating and solving design problems. In this work, we introduce a novel framework that leverages Bayesian optimization over a problem formulation space to identify optimal design formulations in line with decision-maker preferences. By mapping various design scenarios to a multi attribute utility function, our approach enables the system to balance conflicting objectives such as ductility, yield strength, density, and solidification range without requiring an exact problem definition at the outset. We demonstrate the efficacy of our method through an in silico case study on a Mo-Nb-Ti-V-W alloy system targeted for gas turbine engine blade applications. The framework converges on a sweet spot that satisfies critical performance thresholds, illustrating that integrating problem formulation discovery into the autonomous design loop can significantly streamline the experimental process. Future work will incorporate human feedback to further enhance the adaptability of the system in real-world experimental settings.
△ Less
Submitted 8 February, 2025;
originally announced February 2025.
-
Performance-driven Computational Design of Multi-terminal Compositionally Graded Alloy Structures using Graphs
Authors:
Marshall D. Allen,
Vahid Attari,
Brent Vela,
James Hanagan,
Richard Malak,
Raymundo Arróyave
Abstract:
The spatial control of material placement afforded by metal additive manufacturing (AM) has enabled significant progress in the development and implementation of compositionally graded alloys (CGAs) for spatial property variation in monolithic structures. However, cracking and brittle phase formation have hindered CGA development, with limited research extending beyond materials design to structur…
▽ More
The spatial control of material placement afforded by metal additive manufacturing (AM) has enabled significant progress in the development and implementation of compositionally graded alloys (CGAs) for spatial property variation in monolithic structures. However, cracking and brittle phase formation have hindered CGA development, with limited research extending beyond materials design to structural design. Notably, the high-dimensional alloy design space (systems with more than three active elements) remains poorly understood, specifically for CGAs. As a result, many prior efforts take a trial-and-error approach. Additionally, current structural design methods are inadequate for joining dissimilar alloys. In light of these challenges, recent work in graph information modeling and design automation has enabled topological partitioning and analysis of the alloy design space, automated design of multi-terminal CGAs, and automated conformal mapping of CGAs onto corresponding structural geometries. In comparison, prior gradient design approaches are limited to two-terminal CGAs. Here, we integrate these recent advancements, demonstrating a unified performance-driven CGA design approach on a gas turbine blade with broader application to other material systems and engineering structures.
△ Less
Submitted 4 December, 2024;
originally announced December 2024.
-
Supply Risk-Aware Alloy Discovery and Design
Authors:
Mrinalini Mulukutla,
Robert Robinson,
Danial Khatamsaz,
Brent Vela,
Nhu Vu,
Raymundo Arróyave
Abstract:
Materials design is a critical driver of innovation, yet overlooking the technological, economic, and environmental risks inherent in materials and their supply chains can lead to unsustainable and risk-prone solutions. To address this, we present a novel risk-aware design approach that integrates Supply-Chain Aware Design Strategies into the materials development process. This approach leverages…
▽ More
Materials design is a critical driver of innovation, yet overlooking the technological, economic, and environmental risks inherent in materials and their supply chains can lead to unsustainable and risk-prone solutions. To address this, we present a novel risk-aware design approach that integrates Supply-Chain Aware Design Strategies into the materials development process. This approach leverages existing language models and text analysis to develop a specialized model for predicting materials feedstock supply risk indices. To efficiently navigate the multi-objective, multi-constraint design space, we employ Batch Bayesian Optimization (BBO), enabling the identification of Pareto-optimal high entropy alloys (HEAs) that balance performance objectives with minimized supply risk. A case study using the MoNbTiVW system demonstrates the efficacy of our approach in four scenarios, highlighting the significant impact of incorporating supply risk into the design process. By optimizing for both performance and supply risk, we ensure that the developed alloys are not only high-performing but also sustainable and economically viable. This integrated approach represents a critical step towards a future where materials discovery and design seamlessly consider sustainability, supply chain dynamics, and comprehensive life cycle analysis.
△ Less
Submitted 22 September, 2024;
originally announced September 2024.
-
Visualizing High Entropy Alloy Spaces: Methods and Best Practices
Authors:
Brent Vela,
Trevor Hastings,
Raymundo Arróyave
Abstract:
Multi-Principal Element Alloys (MPEAs) have emerged as an exciting area of research in materials science in the 2020s, owing to the vast potential for discovering alloys with unique and tailored properties enabled by the combinations of elements. However, the chemical complexity of MPEAs poses a significant challenge in visualizing composition-property relationships in high-dimensional design spac…
▽ More
Multi-Principal Element Alloys (MPEAs) have emerged as an exciting area of research in materials science in the 2020s, owing to the vast potential for discovering alloys with unique and tailored properties enabled by the combinations of elements. However, the chemical complexity of MPEAs poses a significant challenge in visualizing composition-property relationships in high-dimensional design spaces. Without effective visualization techniques, designing chemically complex alloys is practically impossible. In this methods/protocols article, we present a `toolbox' of visualization techniques that allow for meaningful and insightful visualizations of MPEA composition spaces and property spaces. Our contribution to this toolbox are UMAP projections of entire alloy spaces. We deploy this visualization tool-kit on the following MPEA case studies: 1) Visualizing literature reviews, 2) constraint-satisfaction alloy design scheme, 3) Bayesian optimization alloy design campaigns. Furthermore, we show how this method can be applied to any barycentric design space. While there is no one-size-fits-all visualization technique, our toolbox offers a range of methods and best practices that can be tailored to specific MPEA research needs. This article is intended for materials scientists interested in performing research on multi-principal element alloys, chemically complex alloys, or high entropy alloys, and is expected to facilitate the discovery of novel and tailored properties in MPEAs.
△ Less
Submitted 14 August, 2024;
originally announced August 2024.
-
High-throughput Alloy and Process Design for Metal Additive Manufacturing
Authors:
Sofia Sheikh,
Brent Vela,
Pejman Honarmandi,
Peter Morcos,
David Shoukr,
Abdelrahman Mostafa Kotb,
Raymundo Arroyave,
Ibrahim Karaman,
Alaa Elwany
Abstract:
Designing alloys for additive manufacturing (AM) presents significant opportunities. Still, the chemical composition and processing conditions required for printability (ie., their suitability for fabrication via AM) are challenging to explore using solely experimental means. In this work, we develop a high-throughput (HTP) computational framework to guide the search for highly printable alloys an…
▽ More
Designing alloys for additive manufacturing (AM) presents significant opportunities. Still, the chemical composition and processing conditions required for printability (ie., their suitability for fabrication via AM) are challenging to explore using solely experimental means. In this work, we develop a high-throughput (HTP) computational framework to guide the search for highly printable alloys and appropriate processing parameters. The framework uses material properties from state-of-the-art databases, processing parameters, and simulated melt pool profiles to predict process-induced defects, such as lack-of-fusion, keyholing, and balling. We accelerate the printability assessment using a deep learning surrogate for a thermal model, enabling a 1,000-fold acceleration in assessing the printability of a given alloy at no loss in accuracy when compared with conventional physics-based thermal models. We verify and validate the framework by constructing printability maps for the CoCrFeMnNi Cantor alloy system and comparing our predictions to an exhaustive 'in-house' database. The framework enables the systematic investigation of the printability of a wide range of alloys in the broader Co-Cr-Fe-Mn-Ni HEA system. We identified the most promising alloys that were suitable for high-temperature applications and had the narrowest solidification ranges, and that was the least susceptible to balling, hot-cracking, and the formation of macroscopic printing defects. A new metric for the global printability of an alloy is constructed and is further used for the ranking of candidate alloys. The proposed framework is expected to be integrated into ICME approaches to accelerate the discovery and optimization of novel high-performance, printable alloys.
△ Less
Submitted 8 April, 2023;
originally announced April 2023.
-
An Automated Fully-Computational Framework to Construct Printability Maps for Additively Manufactured Metal Alloys
Authors:
Sofia Sheikh,
Meelad Ranaiefar,
Pejman Honarmandi,
Brent Vela,
Peter Morcos,
David Shoukr,
Raymundo Arroyave,
Ibrahim Karaman,
Alaa Elwany
Abstract:
In additive manufacturing, the optimal processing conditions need to be determined to fabricate porosity-free parts. For this purpose, the design space for an arbitrary alloy needs to be scoped and analyzed to identify the areas of defects for different laser power-scan speed combinations and can be visualized using a printability map. Constructing printability maps is typically a costly process d…
▽ More
In additive manufacturing, the optimal processing conditions need to be determined to fabricate porosity-free parts. For this purpose, the design space for an arbitrary alloy needs to be scoped and analyzed to identify the areas of defects for different laser power-scan speed combinations and can be visualized using a printability map. Constructing printability maps is typically a costly process due to the involvement of experiments, which restricts their application in high-throughput product design. To reduce the cost and effort of constructing printability maps, a fully computational framework is introduced in this work. The framework combines CALPHAD models and a reduced-order model to predict material properties. THen, an analytical thermal model, known as the Eagar-Tsai model, utilizes some of these materials' properties to calculate the melt pool geometry during the AM processes. In the end, printability maps are constructed using material properties, melt pool dimensions, and commonly used criteria for lack of fusion, balling, and keyholing defects. To validate the framework and its general application to laser powder-bed fusion alloys, five common additive manufacturing alloys are analyzed. Furthermore, NiTi-based alloys at three different compositions are evaluated to show the further extension of the framework to alloy systems at different compositions. The defect regions in these printability maps are validated with corresponding experimental observations to compare and benchmark the defect criteria and find the optimal criterion set with the maximum accuracy for each unique material composition. Furthermore, printability maps for NiTi that are obtained from our framework are used in conjunction with process maps resulting from a multi-model framework to guide the fabrication of defect-free additive manufactured parts with tailorable properties and performance.
△ Less
Submitted 8 April, 2023;
originally announced April 2023.
-
A ductility metric for refractory-based multi-principal-element alloys
Authors:
Prashant Singh,
Brent Vela,
Gaoyuan Ouyang,
Nicolas Argibay,
Jun Cui,
Raymundo Arroyave,
Duane D. Johnson
Abstract:
We propose a quantum-mechanical dimensionless metric, the local$-$lattice distortion (LLD), as a reliable predictor of ductility in refractory multi-principal-element alloys (RMPEAs). The LLD metric is based on electronegativity differences in localized chemical environments and combines atomic$-$scale displacements due to local lattice distortions with a weighted average of valence$-$electron cou…
▽ More
We propose a quantum-mechanical dimensionless metric, the local$-$lattice distortion (LLD), as a reliable predictor of ductility in refractory multi-principal-element alloys (RMPEAs). The LLD metric is based on electronegativity differences in localized chemical environments and combines atomic$-$scale displacements due to local lattice distortions with a weighted average of valence$-$electron count. To evaluate the effectiveness of this metric, we examined body$-$centered cubic (bcc) refractory alloys that exhibit ductile$-$to$-$brittle behavior. Our findings demonstrate that local$-$charge behavior can be tuned via composition to enhance ductility in RMPEAs. With finite$-$sized cell effects eliminated, the LLD metric accurately predicted the ductility of arbitrary alloys based on tensile$-$elongation experiments. To validate further, we qualitatively evaluated the ductility of two refractory RMPEAs, i.e., NbTaMoW and Mo$_{72}$W$_{13}Ta$_{10}Ti$_{2.5}Zr$_{2.5}, through the observation of crack formation under indentation, again showing excellent agreement with LLD predictions. A comparative study of three refractory alloys provides further insights into the electronic-structure origin of ductility in refractory RMPEAs. This proposed metric enables rapid and accurate assessment of ductility behavior in the vast RMPEA composition space.
△ Less
Submitted 26 June, 2023; v1 submitted 28 November, 2022;
originally announced November 2022.
-
A Geo-Gender Study of Indexed Computer Science Research Publications
Authors:
Belén Vela,
José María Cavero,
Genoveva Vargas-Solar,
Javier A. Espinosa-Oviedo,
Paloma Cáceres
Abstract:
This paper presents a study that analyzes and gives quantitative means for measuring the gender gap in computing research publications. The data set built for this study is a geo-gender tagged authorship database named authorships that integrates data from computing journals indexed in the Journal Citation Reports (JCR) and the Microsoft Academic Graph (MAG). We propose a gender gap index to analy…
▽ More
This paper presents a study that analyzes and gives quantitative means for measuring the gender gap in computing research publications. The data set built for this study is a geo-gender tagged authorship database named authorships that integrates data from computing journals indexed in the Journal Citation Reports (JCR) and the Microsoft Academic Graph (MAG). We propose a gender gap index to analyze female and male authors' participation gap in JCR publications in Computer Science. Tagging publications with this index, we can classify papers according to the degree of participation of both women and men in different domains. Given that working contexts vary for female scientists depending on the country, our study groups analytics results according to the country of authors affiliation institutions. The paper details the method used to obtain, clean and validate the data, and then it states the hypothesis adopted for defining our index and classifications. Our study results have led to enlightening conclusions concerning various aspects of female authorship's geographical distribution in computing JCR publications.
△ Less
Submitted 3 May, 2021;
originally announced May 2021.
