-
Non-Topological Edge-Localized Yu-Shiba-Rusinov States in CrBr$_3$/NbSe$_2$ Heterostructures
Authors:
Jan P. Cuperus,
Daniel Vanmaekelbergh,
Ingmar Swart
Abstract:
Topological superconductivity is predicted to emerge in certain magnet-superconductor hybrid systems. Here, we revisit the heterostructure of insulating monolayer CrBr$_3$ and NbSe$_2$, for which different conclusions on the presence of topological superconductivity have been reported. Using low-temperature scanning tunneling microscopy and (shot noise) spectroscopy, we find that the superconducti…
▽ More
Topological superconductivity is predicted to emerge in certain magnet-superconductor hybrid systems. Here, we revisit the heterostructure of insulating monolayer CrBr$_3$ and NbSe$_2$, for which different conclusions on the presence of topological superconductivity have been reported. Using low-temperature scanning tunneling microscopy and (shot noise) spectroscopy, we find that the superconducting gap well inside the CrBr3 islands is not affected by magnetism. At the island edges, we observe Yu-Shiba-Rusinov (YSR) states at a variety of in-gap positions, including zero energy. The absence of topological superconductivity is verified by extensive dI/dV measurements at the CrBr$_3$ island edges. Our results ask for a more detailed understanding of the interaction between magnetic insulators and superconductors.
△ Less
Submitted 23 January, 2025;
originally announced January 2025.
-
Topology of Bi$_2$Se$_3$ nanosheets
Authors:
Lucas Maisel Licerán,
Sebastiaan Koerhuis,
Daniel Vanmaekelbergh,
Henk Stoof
Abstract:
Recently, the quantum spin-Hall edge channels of two-dimensional colloidal nanocrystals of the topological insulator Bi$_2$Se$_3$ were observed directly. Motivated by this development, we reconsider the four-band effective model which has been traditionally employed in the past to describe thin nanosheets of this material. Derived from a three-dimensional…
▽ More
Recently, the quantum spin-Hall edge channels of two-dimensional colloidal nanocrystals of the topological insulator Bi$_2$Se$_3$ were observed directly. Motivated by this development, we reconsider the four-band effective model which has been traditionally employed in the past to describe thin nanosheets of this material. Derived from a three-dimensional $\boldsymbol{k} \boldsymbol{\cdot} \boldsymbol{p}$ model, it physically describes the top and bottom electronic surface states at the $Γ$ point that become gapped due to the material's small thickness. However, we find that the four-band model for the surface states alone, as derived directly from the three-dimensional theory, is inadequate for the description of thin films of a few quintuple layers and even yields an incorrect topological invariant within a significant range of thicknesses. To address this limitation we propose an eight-band model which, in addition to the surface states, also incorporates the set of bulk states closest to the Fermi level. We find that the eight-band model not only captures most of the experimental observations, but also agrees with previous first-principles calculations of the $\mathbb{Z}_{2}$ invariant in thin films of varying thickness. The band inversion around the $Γ$ point, which endows the surface-like bands with topology, is shown to be enabled by the presence of the additional bulk-like states without requiring any reparametrization of the resulting effective Hamiltonian.
△ Less
Submitted 28 March, 2024; v1 submitted 6 September, 2023;
originally announced September 2023.
-
Spin-orbit gaps in the s and p orbital bands of an artificial honeycomb lattice
Authors:
J. J. van den Broeke,
I. Swart,
C. Morais Smith,
D. Vanmaekelbergh
Abstract:
Muffin-tin methods have been instrumental in the design of honeycomb lattices that show, in contrast to graphene, separated s and in-plane p bands, a p orbital Dirac cone, and a p orbital flat band. Recently, such lattices have been experimentally realized using the 2D electron gas on Cu(111). A possible next avenue is the introduction of spin-orbit coupling to these systems. Intrinsic spin-orbit…
▽ More
Muffin-tin methods have been instrumental in the design of honeycomb lattices that show, in contrast to graphene, separated s and in-plane p bands, a p orbital Dirac cone, and a p orbital flat band. Recently, such lattices have been experimentally realized using the 2D electron gas on Cu(111). A possible next avenue is the introduction of spin-orbit coupling to these systems. Intrinsic spin-orbit coupling is believed to open topological gaps, and create a topological flat band. Although Rashba coupling is straightforwardly incorporated in the muffin-tin approximation, intrinsic spin-orbit coupling has only been included either for a very specific periodic system, or only close to the Dirac point. Here, we introduce general intrinsic and Rashba spin-orbit terms in the Hamiltonian for both periodic and finite-size systems. We observe a strong band opening over the entire Brillouin zone between the p orbital flat band and Dirac cone hosting a pronounced edge state, robust against the effects of Rashba spin-orbit coupling.
△ Less
Submitted 14 April, 2021;
originally announced April 2021.
-
Electronic properties of atomically coherent square PbSe nanocrystal superlattice resolved by STS
Authors:
Pierre Capiod,
Maaike van der Sluijs,
Jeroen de Boer,
Christophe Delerue,
Ingmar Swart,
Daniel Vanmaekelbergh
Abstract:
Rock-salt lead selenide nanocrystals can be used as building blocks for large scale square superlattices via two-dimensional assembly of nanocrystals at a liquid-air interface followed by oriented attachment. Here we report measurements of the local density of states of an atomically coherent superlattice with square geometry made from PbSe nanocrystals. Controlled annealing of the sample permits…
▽ More
Rock-salt lead selenide nanocrystals can be used as building blocks for large scale square superlattices via two-dimensional assembly of nanocrystals at a liquid-air interface followed by oriented attachment. Here we report measurements of the local density of states of an atomically coherent superlattice with square geometry made from PbSe nanocrystals. Controlled annealing of the sample permits the imaging of a clean structure and to reproducibly probe the band gap and the valence hole and conduction electron states. The measured band gap and peak positions are compared to the results of optical spectroscopy and atomistic tight-binding calculations of the square superlattice band structure. In spite of the crystalline connections between nanocrystals that induce significant electronic couplings, the electronic structure of the superlattices remains very strongly influenced by the effects of disorder and variability.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
Observation of the quantized motion of excitons in CdSe nanoplatelets
Authors:
Michele Failla,
Francisco García Flórez,
Bastiaan B. V. Salzmann,
Daniel Vanmaekelbergh,
Henk T. C. Stoof,
Laurens D. A. Siebbeles
Abstract:
We show that the finite lateral sizes of ultrathin CdSe nanoplatelets strongly affect both their photoluminescence and optical absorption spectra. This is in contrast to the situation in quantum wells, in which the large lateral sizes may be assumed to be infinite. The lateral sizes of the nanoplatelets are varied over a range of a few to tens of nanometers. For these sizes excitons experience in-…
▽ More
We show that the finite lateral sizes of ultrathin CdSe nanoplatelets strongly affect both their photoluminescence and optical absorption spectra. This is in contrast to the situation in quantum wells, in which the large lateral sizes may be assumed to be infinite. The lateral sizes of the nanoplatelets are varied over a range of a few to tens of nanometers. For these sizes excitons experience in-plane quantum confinement, and their center-of-mass motion becomes quantized. Our direct experimental observation of the discretization of the exciton center-of-mass states can be well understood on the basis of the simple particle-in-a-box model.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
p Orbital flat band and Dirac cone in the electronic honeycomb lattice
Authors:
Thomas S. Gardenier,
Jette J. van den Broeke,
Jesper R. Moes,
Ingmar Swart,
Christophe Delerue,
Marlou R. Slot,
Cristiane Morais Smith,
Daniel Vanmaekelbergh
Abstract:
Theory anticipates that the in-plane px, py orbitals in a honeycomb lattice lead to new and potentially useful quantum electronic phases. So far, p orbital bands were only realized for cold atoms in optical lattices and for light and exciton-polaritons in photonic crystals. For electrons, in-plane p orbital physics is difficult to access since natural electronic honeycomb lattices, such as graphen…
▽ More
Theory anticipates that the in-plane px, py orbitals in a honeycomb lattice lead to new and potentially useful quantum electronic phases. So far, p orbital bands were only realized for cold atoms in optical lattices and for light and exciton-polaritons in photonic crystals. For electrons, in-plane p orbital physics is difficult to access since natural electronic honeycomb lattices, such as graphene and silicene, show strong s-p hybridization. Here, we report on electronic honeycomb lattices prepared on a Cu(111) surface in a scanning tunneling microscope that, by design, show (nearly) pure orbital bands, including the p orbital flat band and Dirac cone.
△ Less
Submitted 10 July, 2020; v1 submitted 7 April, 2020;
originally announced April 2020.
-
p-band engineering in artificial electronic lattices
Authors:
M. R. Slot,
S. N. Kempkes,
E. J. Knol,
W. M. J. van Weerdenburg,
J. J. van den Broeke,
D. Wegner,
D. Vanmaekelbergh,
A. A. Khajetoorians,
C. Morais Smith,
I. Swart
Abstract:
Artificial electronic lattices, created atom by atom in a scanning tunneling microscope, have emerged as a highly tunable platform to realize and characterize the lowest-energy bands of novel lattice geometries. Here, we show that artificial electronic lattices can be tailored to exhibit higher-energy bands. We study p-like bands in four-fold and three-fold rotationally symmetric lattices. In addi…
▽ More
Artificial electronic lattices, created atom by atom in a scanning tunneling microscope, have emerged as a highly tunable platform to realize and characterize the lowest-energy bands of novel lattice geometries. Here, we show that artificial electronic lattices can be tailored to exhibit higher-energy bands. We study p-like bands in four-fold and three-fold rotationally symmetric lattices. In addition, we show how an anisotropic design can be used to lift the degeneracy between p_x- and p_y-like bands. The experimental measurements are corroborated by muffin-tin and tight-binding calculations. The approach to engineer higher-energy electronic bands in artificial quantum systems introduced here enables the realization of complex band structures from the bottom up.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
-
Robust zero-energy modes in an electronic higher-order topological insulator: the dimerized Kagome lattice
Authors:
S. N. Kempkes,
M. R. Slot,
J. J. van den Broeke,
P. Capiod,
W. A. Benalcazar,
D. Vanmaekelbergh,
D. Bercioux,
I. Swart,
C. Morais Smith
Abstract:
Quantum simulators are an essential tool for understanding complex quantum materials. Platforms based on ultracold atoms in optical lattices and photonic devices led the field so far, but electronic quantum simulators are proving to be equally relevant. Simulating topological states of matter is one of the holy grails in the field. Here, we experimentally realize a higher-order electronic topologi…
▽ More
Quantum simulators are an essential tool for understanding complex quantum materials. Platforms based on ultracold atoms in optical lattices and photonic devices led the field so far, but electronic quantum simulators are proving to be equally relevant. Simulating topological states of matter is one of the holy grails in the field. Here, we experimentally realize a higher-order electronic topological insulator (HOTI). Specifically, we create a dimerized Kagome lattice by manipulating carbon-monoxide (CO) molecules on a Cu(111) surface using a scanning tunneling microscope (STM). We engineer alternating weak and strong bonds to show that a topological state emerges at the corner of the non-trivial configuration, while it is absent in the trivial one. Contrarily to conventional topological insulators (TIs), the topological state has two dimensions less than the bulk, denoting a HOTI. The corner mode is protected by a generalized chiral symmetry, which leads to a particular robustness against perturbations. Our versatile approach to quantum simulation with artificial lattices holds promises of revealing unexpected quantum phases of matter.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
Design and characterization of electronic fractals
Authors:
S. N. Kempkes,
M. R. Slot,
S. E. Freeney,
S. J. M. Zevenhuizen,
D. Vanmaekelbergh,
I. Swart,
C. Morais Smith
Abstract:
The dimensionality of an electronic quantum system is decisive for its properties. In 1D electrons form a Luttinger liquid and in 2D they exhibit the quantum Hall effect. However, very little is known about the behavior of electrons in non-integer, i.e. fractional dimensions. Here, we show how arrays of artificial atoms can be defined by controlled positioning of CO molecules on a Cu(111) surface,…
▽ More
The dimensionality of an electronic quantum system is decisive for its properties. In 1D electrons form a Luttinger liquid and in 2D they exhibit the quantum Hall effect. However, very little is known about the behavior of electrons in non-integer, i.e. fractional dimensions. Here, we show how arrays of artificial atoms can be defined by controlled positioning of CO molecules on a Cu(111) surface, and how these sites couple to form electronic Sierpinski fractals. We characterize the electron wavefunctions at different energies with scanning tunneling microscopy and spectroscopy and show that they inherit the fractional dimension. Wavefunctions delocalized over the Sierpinski structure decompose into self-similar parts at higher energy, and this scale invariance can also be retrieved in reciprocal space. Our results show that electronic quantum fractals can be man-made by atomic manipulation in a scanning tunneling microscope. The same methodology will allow to address fundamental questions on the effects of spin-orbit interaction and a magnetic field on electrons in non-integer dimensions. Moreover, the rational concept of artificial atoms can readily be transferred to planar semiconductor electronics, allowing for the exploration of electrons in a well-defined fractal geometry, including interactions and external fields.
△ Less
Submitted 22 February, 2021; v1 submitted 13 March, 2018;
originally announced March 2018.
-
Experimental realization and characterization of an electronic Lieb lattice
Authors:
Marlou R. Slot,
Thomas S. Gardenier,
Peter H. Jacobse,
Guido C. P. van Miert,
Sander N. Kempkes,
Stephan J. M. Zevenhuizen,
Cristiane Morais Smith,
Daniel Vanmaekelbergh,
Ingmar Swart
Abstract:
Geometry, whether on the atomic or nanoscale, is a key factor for the electronic band structure of materials. Some specific geometries give rise to novel and potentially useful electronic bands. For example, a honeycomb lattice leads to Dirac-type bands where the charge carriers behave as massless particles. Theoretical predictions are triggering the exploration of novel 2D geometries, such as gra…
▽ More
Geometry, whether on the atomic or nanoscale, is a key factor for the electronic band structure of materials. Some specific geometries give rise to novel and potentially useful electronic bands. For example, a honeycomb lattice leads to Dirac-type bands where the charge carriers behave as massless particles. Theoretical predictions are triggering the exploration of novel 2D geometries, such as graphynes, Kagomé and the Lieb lattice. The latter is the 2D analogue of the 3D lattice exhibited by perovskites; it is a square-depleted lattice, which is characterised by a band structure featuring Dirac cones intersected by a topological flat band. Whereas photonic and cold-atom Lieb lattices have been demonstrated, an electronic equivalent in 2D is difficult to realize in an existing material. Here, we report an electronic Lieb lattice formed by the surface state electrons of Cu(111) confined by an array of CO molecules positioned with a scanning tunneling microscope (STM). Using scanning tunneling microscopy, spectroscopy and wave-function mapping, we confirm the predicted characteristic electronic structure of the Lieb lattice. The experimental findings are corroborated by muffin-tin and tight-binding calculations. At higher energy, second-order electronic patterns are observed, which are equivalent to a super-Lieb lattice.
△ Less
Submitted 14 November, 2016;
originally announced November 2016.
-
Non-blinking single-photon emitters in silica
Authors:
Freddy T. Rabouw,
Nicole M. B. Cogan,
Anne C. Berends,
Ward van der Stam,
Daniel Vanmaekelbergh,
A. Femius Koenderink,
Todd D. Krauss,
Celso de Mello Donegá
Abstract:
Samples for single-emitter spectroscopy are usually prepared by spin-coating a dilute solution of emitters on a microscope cover slip of silicate based glass (such as quartz). Here, we show that both borosilicate glass and quartz contain intrinsic defect colour centres that fluoresce when excited at 532 nm. In a microscope image the defect emission is indistinguishable from spin-coated emitters. T…
▽ More
Samples for single-emitter spectroscopy are usually prepared by spin-coating a dilute solution of emitters on a microscope cover slip of silicate based glass (such as quartz). Here, we show that both borosilicate glass and quartz contain intrinsic defect colour centres that fluoresce when excited at 532 nm. In a microscope image the defect emission is indistinguishable from spin-coated emitters. The emission spectrum is characterised by multiple peaks, most likely due to coupling to a silica vibration with an energy of 160-180 meV. The defects are single-photon emitters, do not blink, and have photoluminescence lifetimes of a few nanoseconds. Photoluminescence from such defects may previously have been misinterpreted as originating from single nanocrystal quantum dots.
△ Less
Submitted 24 September, 2015;
originally announced September 2015.
-
Topological states in multi-orbital HgTe honeycomb lattices
Authors:
W. Beugeling,
E. Kalesaki,
C. Delerue,
Y. -M. Niquet,
D. Vanmaekelbergh,
C. Morais Smith
Abstract:
Research on graphene has revealed remarkable phenomena arising in the honeycomb lattice. However, the quantum spin Hall effect predicted at the K point could not be observed in graphene and other honeycomb structures of light elements due to an insufficiently strong spin-orbit coupling. Here we show theoretically that 2D honeycomb lattices of HgTe can combine the effects of the honeycomb geometry…
▽ More
Research on graphene has revealed remarkable phenomena arising in the honeycomb lattice. However, the quantum spin Hall effect predicted at the K point could not be observed in graphene and other honeycomb structures of light elements due to an insufficiently strong spin-orbit coupling. Here we show theoretically that 2D honeycomb lattices of HgTe can combine the effects of the honeycomb geometry and strong spin-orbit coupling. The conduction bands, experimentally accessible via doping, can be described by a tight-binding lattice model as in graphene, but including multi-orbital degrees of freedom and spin-orbit coupling. This results in very large topological gaps (up to 35 meV) and a flattened band detached from the others. Owing to this flat band and the sizable Coulomb interaction, honeycomb structures of HgTe constitute a promising platform for the observation of a fractional Chern insulator or a fractional quantum spin Hall phase.
△ Less
Submitted 20 March, 2015;
originally announced March 2015.
-
Dirac Cones, Topological Edge States, and Nontrivial Flat Bands in Two-Dimensional Semiconductors with a Honeycomb Nanogeometry
Authors:
E. Kalesaki,
C. Delerue,
C. Morais Smith,
W. Beugeling,
G. Allan,
D. Vanmaekelbergh
Abstract:
We study theoretically two-dimensional single-crystalline sheets of semiconductors that form a honeycomb lattice with a period below 10 nm. These systems could combine the usual semiconductor properties with Dirac bands. Using atomistic tight-binding calculations, we show that both the atomic lattice and the overall geometry influence the band structure, revealing materials with unusual electronic…
▽ More
We study theoretically two-dimensional single-crystalline sheets of semiconductors that form a honeycomb lattice with a period below 10 nm. These systems could combine the usual semiconductor properties with Dirac bands. Using atomistic tight-binding calculations, we show that both the atomic lattice and the overall geometry influence the band structure, revealing materials with unusual electronic properties. In rocksalt Pb chalcogenides, the expected Dirac-type features are clouded by a complex band structure. However, in the case of zinc-blende Cd-chalcogenide semiconductors, the honeycomb nanogeometry leads to rich band structures, including, in the conduction band, Dirac cones at two distinct energies and nontrivial flat bands and, in the valence band, topological edge states. These edge states are present in several electronic gaps opened in the valence band by the spin-orbit coupling and the quantum confinement in the honeycomb geometry. The lowest Dirac conduction band has S-orbital character and is equivalent to the pi-pi* band of graphene but with renormalized couplings. The conduction bands higher in energy have no counterpart in graphene; they combine a Dirac cone and flat bands because of their P-orbital character. We show that the width of the Dirac bands varies between tens and hundreds of meV. These systems emerge as remarkable platforms for studying complex electronic phases starting from conventional semiconductors. Recent advancements in colloidal chemistry indicate that these materials can be synthesized from semiconductor nanocrystals.
△ Less
Submitted 18 February, 2015; v1 submitted 17 February, 2015;
originally announced February 2015.
-
Calibrating and Controlling the Quantum Efficiency Distribution of Inhomogeneously Broadened Quantum Rods Using a Mirror Ball
Authors:
Per Lunnemann,
Freddy T. Rabouw,
Relinde J. A. van Dijk-Moes,
Francesca Pietra,
Daniël Vanmaekelbergh,
A. Femius Koenderink
Abstract:
We demonstrate that a simple silver coated ball lens can be used to accurately measure the entire distribution of radiative transition rates of quantum dot nanocrystals. This simple and cost-effective implementation of Drexhage's method that uses nanometer-controlled optical mode density variations near a mirror, not only allows to extract calibrated ensemble-averaged rates, but for the first time…
▽ More
We demonstrate that a simple silver coated ball lens can be used to accurately measure the entire distribution of radiative transition rates of quantum dot nanocrystals. This simple and cost-effective implementation of Drexhage's method that uses nanometer-controlled optical mode density variations near a mirror, not only allows to extract calibrated ensemble-averaged rates, but for the first time also to quantify the full inhomogeneous dispersion of radiative and non radiative decay rates across thousands of nanocrystals. We apply the technique to novel ultra-stable CdSe/CdS dot-in-rod emitters. The emitters are of large current interest due to their improved stability and reduced blinking. We retrieve a room-temperature ensemble average quantum efficiency of 0.87+-0.08 at a mean lifetime around 20 ns. We confirm a log-normal distribution of decay rates as often assumed in literature and we show that the rate distribution-width, that amounts to about 30% of the mean decay rate, is strongly dependent on the local density of optical states.
△ Less
Submitted 5 August, 2013;
originally announced August 2013.
-
Quantum confined electronic states in atomically well-defined graphene nanostructures
Authors:
Sampsa Hämäläinen,
Zhixiang Sun,
Mark P. Boneschanscher,
Andreas Uppstu,
Mari Ijäs,
Ari Harju,
Daniël Vanmaekelbergh,
Peter Liljeroth
Abstract:
Despite the enormous interest in the properties of graphene and the potential of graphene nanostructures in electronic applications, the study of quantum confined states in atomically well-defined graphene nanostructures remains an experimental challenge. Here, we study graphene quantum dots (GQDs) with well-defined edges in the zigzag direction, grown by chemical vapor deposition (CVD) on an irid…
▽ More
Despite the enormous interest in the properties of graphene and the potential of graphene nanostructures in electronic applications, the study of quantum confined states in atomically well-defined graphene nanostructures remains an experimental challenge. Here, we study graphene quantum dots (GQDs) with well-defined edges in the zigzag direction, grown by chemical vapor deposition (CVD) on an iridium(111) substrate, by low-temperature scanning tunneling microscopy (STM) and spectroscopy (STS). We measure the atomic structure and local density of states (LDOS) of individual GQDs as a function of their size and shape in the range from a couple of nanometers up to ca. 20 nm. The results can be quantitatively modeled by a relativistic wave equation and atomistic tight-binding calculations. The observed states are analogous to the solutions of the text book "particle-in-a-box" problem applied to relativistic massless fermions.
△ Less
Submitted 20 October, 2011; v1 submitted 19 October, 2011;
originally announced October 2011.
-
Topographic and electronic contrast of the graphene moiré on Ir(111) probed by scanning tunneling microscopy and non-contact atomic force microscopy
Authors:
Zhixiang Sun,
Sampsa K. Hämäläinen,
Jani Sainio,
Jouko Lahtinen,
Daniël Vanmaekelbergh,
Peter Liljeroth
Abstract:
Epitaxial graphene grown on transition metal surfaces typically exhibits a moiré pattern due to the lattice mismatch between graphene and the underlying metal surface. We use both scanning tunneling microscopy (STM) and atomic force microscopy (AFM) experiments to probe the electronic and topographic contrast of the graphene moiré on the Ir(111) surface. While STM topography is influenced by the l…
▽ More
Epitaxial graphene grown on transition metal surfaces typically exhibits a moiré pattern due to the lattice mismatch between graphene and the underlying metal surface. We use both scanning tunneling microscopy (STM) and atomic force microscopy (AFM) experiments to probe the electronic and topographic contrast of the graphene moiré on the Ir(111) surface. While STM topography is influenced by the local density of states close to the Fermi energy and the local tunneling barrier height, AFM is capable of yielding the 'true' surface topography once the background force arising from the van der Waals (vdW) interaction between the tip and the substrate is taken into account. We observe a moiré corrugation of 35$\pm$10 pm, where the graphene-Ir(111) distance is the smallest in the areas where the graphene honeycomb is atop the underlying iridium atoms and larger on the fcc or hcp threefold hollow sites.
△ Less
Submitted 17 January, 2011; v1 submitted 17 November, 2010;
originally announced November 2010.
-
Electronic coupling of colloidal CdSe nanocrystals monitored by thin-film positron-electron momentum density methods
Authors:
S. W. H. Eijt,
P. E. Mijnarends,
L. C. van Schaarenburg,
A. J. Houtepen,
D. Vanmaekelbergh,
B. Barbiellini,
A. Bansil
Abstract:
The effect of temperature controlled annealing on the confined valence electron states in CdSe nanocrystal arrays, deposited as thin films, was studied using two-dimensional angular correlation of annihilation radiation (2D-ACAR). A reduction in the intensity by ~35% was observed in a feature of the positron annihilation spectrum upon removal of the pyridine capping molecules above 200 degrees C…
▽ More
The effect of temperature controlled annealing on the confined valence electron states in CdSe nanocrystal arrays, deposited as thin films, was studied using two-dimensional angular correlation of annihilation radiation (2D-ACAR). A reduction in the intensity by ~35% was observed in a feature of the positron annihilation spectrum upon removal of the pyridine capping molecules above 200 degrees Celsius in a vacuum. This reduction is explained by an increased electronic interaction of the valence orbitals of neighboring nanocrystals, induced by the formation of inorganic interfaces. Partial evaporation of the nanoporous CdSe layer and additional sintering into a polycrystalline thin film was observed at a relatively low temperature of ~486 degrees Celsius.
△ Less
Submitted 17 February, 2009;
originally announced February 2009.
-
Positron studies of surfaces, structure and electronic properties of nanocrystals
Authors:
S. W. H. Eijt,
B. Barbiellini,
A. J. Houtepen,
D. Vanmaekelbergh,
P. E. Mijnarends,
A. Bansil
Abstract:
A brief review is given of recent positron studies of metal and semiconductor nanocrystals. The prospects offered by positron annihilation as a sensitive method to access nanocrystal (NC) properties are described and compared with other experimental methods. The tunability of the electronic structure of nanocrystals underlies their great potential for application in many areas. Owing to their la…
▽ More
A brief review is given of recent positron studies of metal and semiconductor nanocrystals. The prospects offered by positron annihilation as a sensitive method to access nanocrystal (NC) properties are described and compared with other experimental methods. The tunability of the electronic structure of nanocrystals underlies their great potential for application in many areas. Owing to their large surface-to-volume ratio, the surfaces and interfaces of NCs play a crucial role in determining their properties. Here we focus on positron 2D angular correlation of annihilation radiation (2D-ACAR) and (two-detector) Doppler studies for investigating surfaces and electronic properties of CdSe NCs.
△ Less
Submitted 8 May, 2007;
originally announced May 2007.
-
Statistical analysis of time-resolved emission from ensembles of semiconductor quantum dots: interpretation of exponential decay models
Authors:
A. F. van Driel,
I. S. Nikolaev,
P. Vergeer,
P. Lodahl,
D. Vanmaekelbergh,
W. L. Vos
Abstract:
We present a statistical analysis of time-resolved spontaneous emission decay curves from ensembles of emitters, such as semiconductor quantum dots, with the aim to interpret ubiquitous non-single-exponential decay. Contrary to what is widely assumed, the density of excited emitters and the intensity in an emission decay curve are not proportional, but the density is a time-integral of the inten…
▽ More
We present a statistical analysis of time-resolved spontaneous emission decay curves from ensembles of emitters, such as semiconductor quantum dots, with the aim to interpret ubiquitous non-single-exponential decay. Contrary to what is widely assumed, the density of excited emitters and the intensity in an emission decay curve are not proportional, but the density is a time-integral of the intensity. The integral relation is crucial to correctly interpret non-single-exponential decay. We derive the proper normalization for both a discrete, and a continuous distribution of rates, where every decay component is multiplied with its radiative decay rate. A central result of our paper is the derivation of the emission decay curve in case that both radiative and non-radiative decays are independently distributed. In this case, the well-known emission quantum efficiency can not be expressed by a single number anymore, but it is also distributed. We derive a practical description of non-single-exponential emission decay curves in terms of a single distribution of decay rates; the resulting distribution is identified as the distribution of total decay rates weighted with the radiative rates. We apply our analysis to recent examples of colloidal quantum dot emission in suspensions and in photonic crystals, and we find that this important class of emitters is well described by a log-normal distribution of decay rates with a narrow and a broad distribution, respectively. Finally, we briefly discuss the Kohlrausch stretched-exponential model, and find that its normalization is ill-defined for emitters with a realistic quantum efficiency of less than 100 %.
△ Less
Submitted 29 January, 2007; v1 submitted 5 July, 2006;
originally announced July 2006.
-
Frequency-dependent spontaneous emission rate from CdSe and CdTe nanocrystals: influence of dark states
Authors:
A. F. van Driel,
G. Allan,
C. Delerue,
P. Lodahl,
W. L. Vos,
D. Vanmaekelbergh
Abstract:
We studied the rate of spontaneous emission from colloidal CdSe and CdTe nanocrystals at room temperature. The decay rate, obtained from luminescence decay curves, increases with the emission frequency in a supra-linear way. This dependence is explained by the thermal occupation of dark exciton states at room temperature, giving rise to a strong attenuation of the rate of emission. The supra-lin…
▽ More
We studied the rate of spontaneous emission from colloidal CdSe and CdTe nanocrystals at room temperature. The decay rate, obtained from luminescence decay curves, increases with the emission frequency in a supra-linear way. This dependence is explained by the thermal occupation of dark exciton states at room temperature, giving rise to a strong attenuation of the rate of emission. The supra-linear dependence is in agreement with the results of tight-binding calculations.
△ Less
Submitted 21 October, 2005; v1 submitted 22 September, 2005;
originally announced September 2005.
-
Planar nanocontacts with atomically controlled separation
Authors:
Y. V. Kervennic,
D. Vanmaekelbergh,
L. P Kouwenhoven,
H. S. J Van der Zant
Abstract:
We have developed a technology to reproducibly make gaps with distance control on the single atom scale. The gold contacts are flat on the nanometre scale and are fabricated on an oxidized aluminium film that serves as a gate. We show that these contacts are clean and can be stabilized via chemical functionalization. Deposition of conjugated molecules leads to an increase in the gap conductance…
▽ More
We have developed a technology to reproducibly make gaps with distance control on the single atom scale. The gold contacts are flat on the nanometre scale and are fabricated on an oxidized aluminium film that serves as a gate. We show that these contacts are clean and can be stabilized via chemical functionalization. Deposition of conjugated molecules leads to an increase in the gap conductance of several orders of magnitude. Stable current-voltage characteristics at room temperature are slightly nonlinear. At low temperature, they are highly nonlinear and show a clear gate effect.
△ Less
Submitted 19 November, 2004;
originally announced November 2004.
-
Wide energy-window view on the density of states and hole mobility of poly(p-phenylene vinylene)
Authors:
I. N. Hulea,
H. B. Brom,
A. J. Houtepen,
D. Vanmaekelbergh,
J. J. Kelly,
E. A. Meulenkamp
Abstract:
Using an electrochemically gated transistor, we achieved controlled and reversible doping of poly(p-phenylene vinylene) in a large concentration range. Our data open a wide energy-window view on the density of states (DOS) and show, for the first time, that the core of the DOS function is Gaussian, while the low-energy tail has a more complex structure. The hole mobility increases by more than f…
▽ More
Using an electrochemically gated transistor, we achieved controlled and reversible doping of poly(p-phenylene vinylene) in a large concentration range. Our data open a wide energy-window view on the density of states (DOS) and show, for the first time, that the core of the DOS function is Gaussian, while the low-energy tail has a more complex structure. The hole mobility increases by more than four orders of magnitude when the electrochemical potential is scanned through the DOS.
△ Less
Submitted 9 September, 2004;
originally announced September 2004.