-
Semi-analytical derivation of the 2D all-FLR ICRH wave equation as a high-order partial differential equation
Authors:
Dirk Van Eester,
Ernesto Lerche
Abstract:
For 1-dimensional applications, Bude's method [Bude et al, Plasma Phys. Control. Fusion, 63 (2021) 035014] has been shown to be capable of accurately solving the all-FLR (Finite Larmor Radius) integro-differential wave equation as a high-order differential equation allowing to represent all physically relevant (fast, slow and Bernstein) modes upon making a polynomial fit that is accurate in the re…
▽ More
For 1-dimensional applications, Bude's method [Bude et al, Plasma Phys. Control. Fusion, 63 (2021) 035014] has been shown to be capable of accurately solving the all-FLR (Finite Larmor Radius) integro-differential wave equation as a high-order differential equation allowing to represent all physically relevant (fast, slow and Bernstein) modes upon making a polynomial fit that is accurate in the relevant part of k-space. The adopted fit is superior to the Taylor series expansion traditionally adopted to truncate the series of finite Larmor radius corrections, while the differential rather than integro-differential approach allows for significant gain in required computational time when solving the wave equation. The method was originally proposed and successfully tested in 1D for radio frequency (RF) waves and in absence of the poloidal field [D. Van Eester & E. Lerche, Nucl. Fusion, 61 (2021) 016024]. In the present paper, the derivation of the extension of that procedure to 2D and for finite poloidal field - semi-analytically yielding the coefficients of the relevant high-order partial differential equation - is discussed in preparation of future numerical application.
△ Less
Submitted 27 October, 2023;
originally announced October 2023.
-
ANSYS HFSS as a new numerical tool to study wave propagation inside anisotropic magnetized plasmas in the Ion Cylotron Range of Frequencies
Authors:
V. Maquet,
R. Ragona,
D. Van Eester,
J. Hillairet,
F. Durodie
Abstract:
The paper demonstrates the possibility to use ANSYS HFSS as a versatile simulating tool for antennas facing inhomogeneous anisotropic magnetized plasmas in the Ion Cyclotron Range of Frequencies (ICRF). The methodology used throughout the paper is first illustrated with a uniform plasma case. We then extend this method to 1D plasma density profiles where we perform a first benchmark against the AN…
▽ More
The paper demonstrates the possibility to use ANSYS HFSS as a versatile simulating tool for antennas facing inhomogeneous anisotropic magnetized plasmas in the Ion Cyclotron Range of Frequencies (ICRF). The methodology used throughout the paper is first illustrated with a uniform plasma case. We then extend this method to 1D plasma density profiles where we perform a first benchmark against the ANTITER II code. The possibility to include more complex phenomena relevant to the ICRF field in future works like the lower hybrid resonance, the edge propagation of slow waves, sheaths and ponderomotive forces is also discussed. We finally present a 3D case for WEST and compare the radiation resistance calculated by the code to the experimental data. The main result of this paper - the implementation of a cold plasma medium in HFSS - is general and we hope it will also benefit to research fields besides controlled fusion.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
New plasma regimes with small ELMs and high confinement at the Joint European Torus
Authors:
J. Garcia,
E. de la Luna,
M. Sertoli,
F. Casson,
S. Mazzi,
Z. Stancar,
G. Szepesi,
D. Frigione,
L. Garzotti,
F. Rimini,
D. van Eester,
P. Lomas,
C. Sozzi,
R. N. Aiba,
R. Coelho,
L. Frasinetti,
G. Huijsmans,
F. Liu
Abstract:
New plasma regimes with high confinement, low core impurity accumulation and small Edge localized mode (ELMs) perturbations have been obtained close to ITER conditions in magnetically confined plasmas from the Joint European torus (JET) tokamak. Such regimes are achieved by means of optimized particle fuelling conditions which trigger a self-organize state with a strong increase in rotation and io…
▽ More
New plasma regimes with high confinement, low core impurity accumulation and small Edge localized mode (ELMs) perturbations have been obtained close to ITER conditions in magnetically confined plasmas from the Joint European torus (JET) tokamak. Such regimes are achieved by means of optimized particle fuelling conditions which trigger a self-organize state with a strong increase in rotation and ion temperature and a decrease of the edge density. An interplay between core and edge plasma regions leads to reduced turbulence levels and outward impurity convection. These results pave the way to an attractive alternative to the standard plasmas considered for fusion energy generation in a tokamak with metallic wall environment such as the ones expected in ITER
△ Less
Submitted 8 March, 2021; v1 submitted 3 March, 2021;
originally announced March 2021.
-
A new ICRF scenario for bulk ion heating in D-T plasmas: How to utilize intrinsic impurities in fusion devices in our favour
Authors:
Y. O. Kazakov,
J. Ongena,
D. Van Eester,
R. Bilato,
R. Dumont,
E. Lerche,
M. Mantsinen,
A. Messiaen
Abstract:
A fusion reactor requires plasma pre-heating before the rate of deuterium-tritium fusion reactions becomes significant. In ITER, radiofrequency (RF) heating of 3He ions, additionally puffed into the plasma, is one of the main options considered for increasing bulk ion temperature during the ramp-up phase of the pulse. In this paper, we propose an alternative scenario for bulk ion heating with RF w…
▽ More
A fusion reactor requires plasma pre-heating before the rate of deuterium-tritium fusion reactions becomes significant. In ITER, radiofrequency (RF) heating of 3He ions, additionally puffed into the plasma, is one of the main options considered for increasing bulk ion temperature during the ramp-up phase of the pulse. In this paper, we propose an alternative scenario for bulk ion heating with RF waves, which requires no extra 3He puff and profits from the presence of intrinsic Beryllium impurities in the plasma. The discussed method to heat Be impurities in D-T plasmas is shown to provide an even larger fraction of fuel ion heating.
△ Less
Submitted 24 July, 2015; v1 submitted 22 June, 2015;
originally announced June 2015.
-
Kinetic description of wave induced plasma flow in the radio frequency domain
Authors:
Dirk Van Eester,
Kristel Crombé,
Yevgen Kazakov
Abstract:
A model for ICRH induced flows in the presence of a strong magnetic field is presented. These flows are the finite temperature counterpart of flows existing in cold plasmas described e.g. in [D. Van Eester et al., Plasma Phys. Control. Fusion 55 (2013) 025002] and thus do not rely on the waves being damped. The kinetic corrections offer insight in what happens at cyclotron resonances. Authors comm…
▽ More
A model for ICRH induced flows in the presence of a strong magnetic field is presented. These flows are the finite temperature counterpart of flows existing in cold plasmas described e.g. in [D. Van Eester et al., Plasma Phys. Control. Fusion 55 (2013) 025002] and thus do not rely on the waves being damped. The kinetic corrections offer insight in what happens at cyclotron resonances. Authors commonly either rely on the confining magnetic field $\vec{B}_o$-field to be strong, or the electric field $\vec{E}$-field to be rapidly varying but are not accounting for both when writing down the solution of the equation of motion on the slow time scale. In this paper, the equation of motion is solved for constant $B_o$ to keep the discussion as simple as possible. The simultaneous presence of $\vec{B}_o$ and the $\vec{E}$-field inhomogeneity causes drifts perpendicular to the $\vec{B}_o$ and to other slow time scale accelerations, the Ponderomotive acceleration being one of them. Because of the first and having tokamak applications in mind, these flows - although small in magnitude - cause drifts that enter in competition with transport induced flows.
△ Less
Submitted 19 March, 2014;
originally announced March 2014.
-
On the Challenge of Plasma Heating with the JET Metallic Wall
Authors:
M-L Mayoral,
V Bobkov,
A Czarnecka,
I Day,
A Ekedah,
P Jacquet,
M Goniche,
R King,
K Kirov,
E Lerche,
J Mailloux,
D Van Eester,
O Asunta,
C Challis,
D Ciric,
J W Coenen,
L Colas,
C Giroud,
M Graham,
I Jenkins,
E Joffrin,
T Jones,
D King,
V Kiptily,
C C Klepper
, et al. (17 additional authors not shown)
Abstract:
The major aspects linked to the use of the JET auxiliary heating systems: NBI, ICRF and LHCD, in the new JET ITER-like wall (JET-ILW) are presented. We show that although there were issues related to the operation of each system, efficient and safe plasma heating was obtained with room for higher power. For the NBI up to 25.7MW was safely injected; issues that had to be tackled were mainly the bea…
▽ More
The major aspects linked to the use of the JET auxiliary heating systems: NBI, ICRF and LHCD, in the new JET ITER-like wall (JET-ILW) are presented. We show that although there were issues related to the operation of each system, efficient and safe plasma heating was obtained with room for higher power. For the NBI up to 25.7MW was safely injected; issues that had to be tackled were mainly the beam shine-through and beam re-ionisation before its entrance into the plasma. For the ICRF system, 5MW were coupled in L-mode and 4MW in H-mode; the main areas of concern were RF-sheaths related heat loads and impurities production. For the LH, 2.5 MW were delivered without problems; arcing and generation of fast electron beams in front of the launcher that can lead to high heat loads were the keys issues. For each system, an overview will be given of: the main modifications implemented for safe use, their compatibility with the new metallic wall, the differences in behavior compared with the previous carbon wall, with emphasis on heat loads and impurity content in the plasma.
△ Less
Submitted 4 September, 2013;
originally announced September 2013.
-
Characterisation of local ICRF heat loads on the JET ILW
Authors:
P. Jacquet,
F. Marcotte,
L. Colas,
G. Arnoux,
V. Bobkov,
Y. Corre,
S. Devaux,
J-L Gardarein,
E. Gauthier,
M. Graham,
E. Lerche,
M-L. Mayoral,
I. Monakhov,
F. Rimini,
A. Sirinelli,
D. Van Eester,
JET EFDA contributors
Abstract:
When using Ion Cyclotron Range of Frequency (ICRF) heating, enhanced heat-fluxes are commonly observed on some plasma facing components close to the antennas. Experiments have recently been carried out on JET with the new ITER-Like-Wall (ILW) to characterize the heat flux to the JET ICRF antennas. Using Infra-Red thermography and thermal models of the tiles, heat-fluxes were evaluated from the sur…
▽ More
When using Ion Cyclotron Range of Frequency (ICRF) heating, enhanced heat-fluxes are commonly observed on some plasma facing components close to the antennas. Experiments have recently been carried out on JET with the new ITER-Like-Wall (ILW) to characterize the heat flux to the JET ICRF antennas. Using Infra-Red thermography and thermal models of the tiles, heat-fluxes were evaluated from the surface temperature increase during the RF phase of L-mode plasmas. The maximum observed heat-flux intensity was ~ 4.5 MW/m2 when operating with -π/2 current drive strap phasing at power level of 2MW per antenna and with a 4 cm distance between the plasma and the outer limiters. Heat-fluxes are reduced when using dipole strap phasing. The fraction of ICRF power deposited on the antenna limiters or septa was in the range 2-10% for dipole phasing and 10-20% with +/-π/2 phasing.
△ Less
Submitted 28 June, 2013;
originally announced June 2013.
-
Effect of impurities on the transition between minority ion and mode conversion ICRH heating in (3He)-H tokamak plasmas
Authors:
Ye. O. Kazakov,
T. Fülöp,
D. Van Eester
Abstract:
Hydrogen majority plasmas will be used in the initial non-activated phase of ITER operation. Optimizing ion cyclotron resonance heating (ICRH) in such scenarios will help in achieving H-mode in these plasmas. Past JET experiments with the carbon wall revealed a significant impact of intrinsic impurities on the ICRH performance in (3He)-H plasmas relevant for the full-field initial ITER phase. High…
▽ More
Hydrogen majority plasmas will be used in the initial non-activated phase of ITER operation. Optimizing ion cyclotron resonance heating (ICRH) in such scenarios will help in achieving H-mode in these plasmas. Past JET experiments with the carbon wall revealed a significant impact of intrinsic impurities on the ICRH performance in (3He)-H plasmas relevant for the full-field initial ITER phase. High plasma contamination with carbon impurities resulted in the appearance of a supplementary mode conversion layer and significant reduction in the transition concentration of 3He minority ions, defined as the concentration at which the change from minority heating to mode conversion regime occurs. In view of the installation of the new ITER-like wall at JET, it is important to evaluate the effect of Be and W impurities on ICRH scenarios in (3He)-H plasmas. In this paper, an approximate analytical expression for the transition concentration of 3He minority ions is derived as a function of plasma and ICRH parameters, and accounting for typical impurity species at JET. The accompanying 1D wave modeling supports the analytical results and suggests a potential experimental method to reduce 3He level needed to achieve a specific heating regime by puffing a small amount of 4He ions additionally to (3He)-H plasma.
△ Less
Submitted 13 March, 2013; v1 submitted 15 January, 2013;
originally announced January 2013.
