-
Correlating Chemical Reaction and Mass Transport in Hydrogen-based Direct Reduction of Iron Oxide
Authors:
Xueli Zheng,
Subhechchha Paul,
Lauren Moghimi,
Yifan Wang,
Rafael A. Vilá,
Fan Zhang,
Xin Gao,
Junjing Deng,
Yi Jiang,
Xin Xiao,
Chaolumen Wu,
Louisa C. Greenburg,
Yufei Yang,
Yi Cui,
Arturas Vailionis,
Ivan Kuzmenko,
Jan llavsky,
Yadong Yin,
Yi Cui,
Leora Dresselhaus-Marais
Abstract:
Steelmaking contributes 8% to the total CO2 emissions globally, primarily due to coal-based iron ore reduction. Clean hydrogen-based ironmaking has variable performance because the dominant gas-solid reduction mechanism is set by the defects and pores inside the mm-nm sized oxide particles that change significantly as the reaction progresses. While these governing dynamics are essential to establi…
▽ More
Steelmaking contributes 8% to the total CO2 emissions globally, primarily due to coal-based iron ore reduction. Clean hydrogen-based ironmaking has variable performance because the dominant gas-solid reduction mechanism is set by the defects and pores inside the mm-nm sized oxide particles that change significantly as the reaction progresses. While these governing dynamics are essential to establish continuous flow of iron and its ores through reactors, the direct link between agglomeration and chemistry is still contested due to missing measurements. In this work, we directly measure the connection between chemistry and agglomeration in the smallest iron oxides relevant to magnetite ores. Using synthesized spherical 10-nm magnetite particles reacting in H2, we resolve the formation and consumption of wüstite (FeO) - the step most commonly attributed to agglomeration. Using X-ray scattering and microscopy, we resolve crystallographic anisotropy in the rate of the initial reaction, which becomes isotropic as the material sinters. Complementing with imaging, we demonstrate how the particles self-assemble, subsequently react and sinter into ~100x oblong grains. Our insights into how morphologically uniform iron oxide particles react and agglomerate H2 reduction enable future size-dependent models to effectively describe the multiscale iron ore reduction.
△ Less
Submitted 5 March, 2023; v1 submitted 27 February, 2023;
originally announced February 2023.
-
Observation of anti-damping spin-orbit torques generated by in-plane and out-of-plane spin polarizations in MnPd3
Authors:
Mahendra DC,
Ding-Fu Shao,
Vincent D. -H. Hou,
P. Quarterman,
Ali Habiboglu,
Brooks Venuti,
Masashi Miura,
Brian Kirby,
Arturas Vailionis,
Chong Bi,
Xiang Li,
Fen Xue,
Yen-Lin Huang,
Yong Deng,
Shy-Jay Lin,
Wilman Tsai,
Serena Eley,
Weigang Wang,
Julie A. Borchers,
Evgeny Y. Tsymbal,
Shan X. Wang
Abstract:
High spin-orbit torques (SOTs) generated by topological materials and heavy metals interfaced with a ferromagnetic layer show promise for next generation magnetic memory and logic devices. SOTs generated from the in-plane spin polarization along y-axis originated by the spin Hall and Edelstein effects can switch magnetization collinear with the spin polarization in the absence of external magnetic…
▽ More
High spin-orbit torques (SOTs) generated by topological materials and heavy metals interfaced with a ferromagnetic layer show promise for next generation magnetic memory and logic devices. SOTs generated from the in-plane spin polarization along y-axis originated by the spin Hall and Edelstein effects can switch magnetization collinear with the spin polarization in the absence of external magnetic fields. However, an external magnetic field is required to switch the magnetization along x and z-axes via SOT generated by y-spin polarization. Here, we present that the above limitation can be circumvented by unconventional SOT in magnetron-sputtered thin film MnPd3. In addition to the conventional in-plane anti-damping-like torque due to the y-spin polarization, out-of-plane and in-plane anti-damping-like torques originating from z-spin and x-spin polarizations, respectively have been observed at room temperature. The spin torque efficiency corresponding to the y-spin polarization from MnPd3 thin films grown on thermally oxidized silicon substrate and post annealed at 400 Deg C is 0.34 - 0.44. Remarkably, we have demonstrated complete external magnetic field-free switching of perpendicular Co layer via unconventional out-of-plane anti-damping-like torque from z-spin polarization. Based on the density functional theory calculations, we determine that the observed x- and z- spin polarizations with the in-plane charge current are due to the low symmetry of the (114) oriented MnPd3 thin films. Taken together, the new material reported here provides a path to realize a practical spin channel in ultrafast magnetic memory and logic devices.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Charge-Spin Interconversion in Epitaxial Pt Probed by Spin-Orbit Torques in a Magnetic Insulator
Authors:
Peng Li,
Lauren J. Riddiford,
Chong Bi,
Jacob J. Wisser,
Xiao-Qi Sun,
Arturas Vailionis,
Michael J. Veit,
Aaron Altman,
Xiang Li,
Mahendra DC,
Shan X. Wang,
Y. Suzuki,
Satoru Emori
Abstract:
We measure spin-orbit torques (SOTs) in a unique model system of all-epitaxial ferrite/Pt bilayers to gain insights into charge-spin interconversion in Pt. With negligible electronic conduction in the insulating ferrite, the crystalline Pt film acts as the sole source of charge-to-spin conversion. A small field-like SOT independent of Pt thickness suggests a weak Rashba-Edelstein effect at the fer…
▽ More
We measure spin-orbit torques (SOTs) in a unique model system of all-epitaxial ferrite/Pt bilayers to gain insights into charge-spin interconversion in Pt. With negligible electronic conduction in the insulating ferrite, the crystalline Pt film acts as the sole source of charge-to-spin conversion. A small field-like SOT independent of Pt thickness suggests a weak Rashba-Edelstein effect at the ferrite/Pt interface. By contrast, we observe a sizable damping-like SOT that depends on the Pt thickness, from which we deduce the dominance of an extrinsic spin-Hall effect (skew scattering) and Dyakonov-Perel spin relaxation in the crystalline Pt film. Furthermore, our results point to a large internal spin-Hall ratio of $\approx$0.8 in epitaxial Pt. Our experimental work takes an essential step towards understanding the mechanisms of charge-spin interconversion and SOTs in Pt-based heterostructures, which are crucial for power-efficient spintronic devices.
△ Less
Submitted 1 June, 2021; v1 submitted 10 September, 2020;
originally announced September 2020.
-
All femtosecond optical pump and X-ray probe: holey-axicon for free electron laser
Authors:
V. Anand,
J. Maksimovic,
T. Katkus,
S. H. Ng,
O. Ulcinas,
M. Mikutis,
J. Baltrukonis,
A. Urbas,
G. Slekys,
H. Ogura,
D. Sagae,
T. Pikuz,
T. Somekawa,
N. Ozaki,
A. Vailionis,
G. Seniutinas,
V. Mizeikis,
K. Glazebrook,
J. P. Brodie,
P. R. Stoddart,
L. Rapp,
A. V. Rode,
E. G. Gamaly,
S. Juodkazis
Abstract:
We put forward a co-axial pump(optical)-probe(X-rays) experimental concept and show performance of the optical component. A Bessel beam generator with a central 100 micrometers-diameter hole (on the optical axis) was fabricated using femtosecond (fs) laser structuring inside a silica plate. This flat-axicon optical element produces a needle-like axial intensity distribution which can be used for t…
▽ More
We put forward a co-axial pump(optical)-probe(X-rays) experimental concept and show performance of the optical component. A Bessel beam generator with a central 100 micrometers-diameter hole (on the optical axis) was fabricated using femtosecond (fs) laser structuring inside a silica plate. This flat-axicon optical element produces a needle-like axial intensity distribution which can be used for the optical pump pulse. The fs-X-ray free electron laser (X-FEL) beam of sub-1 micrometer diameter can be introduced through the central hole along the optical axis onto a target as a probe. Different realisations of optical pump are discussed. Such optical elements facilitate alignment of ultra-short fs-pulses in space and time and can be used in light-matter interaction experiments at extreme energy densities on the surface and in the volume of targets. Full advantage of ultra-short 10 fs X-FEL probe pulses with fs-pump(optical) opens an unexplored temporal dimension of phase transitions and the fastest laser-induced rates of material heating and quenching. A wider field of applications of fs-laser-enabled structuring of materials and design of specific optical elements for astrophotonics is presented.
△ Less
Submitted 24 May, 2020;
originally announced May 2020.
-
Two-dimensional electron systems in perovskite oxide heterostructures: Role of the polarity-induced substitutional defects
Authors:
Shih-Chieh Lin,
Cheng-Tai Kuo,
Yu-Cheng Shao,
Yi-De Chuang,
Jaap Geessinck,
Mark Huijben,
Jean-Pascal Rueff,
Ismael L. Graff,
Giuseppina Conti,
Yingying Peng,
Aaron Bostwick,
Eli Rotenberg,
Eric Gullikson,
Slavomír Nemšák,
Arturas Vailionis,
Nicolas Gauquelin,
Johan Verbeeck,
Giacomo Ghiringhelli,
Claus M. Schneider,
Charles S. Fadley
Abstract:
The discovery of a two-dimensional electron system (2DES) at the interfaces of perovskite oxides such as LaAlO3 and SrTiO3 has motivated enormous efforts in engineering interfacial functionalities with this type of oxide heterostructures. However, its fundamental origins are still not understood, e.g. the microscopic mechanisms of coexisting interface conductivity and magnetism. Here we report a c…
▽ More
The discovery of a two-dimensional electron system (2DES) at the interfaces of perovskite oxides such as LaAlO3 and SrTiO3 has motivated enormous efforts in engineering interfacial functionalities with this type of oxide heterostructures. However, its fundamental origins are still not understood, e.g. the microscopic mechanisms of coexisting interface conductivity and magnetism. Here we report a comprehensive spectroscopic investigation of the depth profile of 2DES-relevant Ti 3d interface carriers using depth- and element-specific techniques, standing-wave excited photoemission and resonant inelastic scattering. We found that one type of Ti 3d interface carriers, which give rise to the 2DES are located within 3 unit cells from the n-type interface in the SrTiO3 layer. Unexpectedly, another type of interface carriers, which are polarity-induced Ti-on-Al antisite defects, reside in the first 3 unit cells of the opposing LaAlO3 layer (~10 Å). Our findings provide a microscopic picture of how the localized and mobile Ti 3d interface carriers distribute across the interface and suggest that the 2DES and 2D magnetism at the LaAlO3/SrTiO3 interface have disparate explanations as originating from different types of interface carriers.
△ Less
Submitted 29 October, 2020; v1 submitted 21 December, 2019;
originally announced December 2019.
-
Nanoscale optical and structural characterisation of silk
Authors:
Meguya Ryu,
Reo Honda,
Adrian Cernescu,
Arturas Vailionis,
Armandas Balcytis,
Jitraporn Vongsvivut,
Jing-Liang Li,
Denver P. Linklater,
Elena P. Ivanova,
Vygantas Mizeikis,
Mark J. Tobin,
Junko Morikawa,
Saulius Juodkazis
Abstract:
Background: Nanoscale composition of silk defining its unique properties via a hierarchical structural anisotropy has to be analysed at the highest spatial resolution of tens-of-nanometers corresponding to the size of fibrils made of b-sheets, which are the crystalline building blocks of silk. Results: Nanoscale optical and structural properties of silk have been measured from 100-nm thick longitu…
▽ More
Background: Nanoscale composition of silk defining its unique properties via a hierarchical structural anisotropy has to be analysed at the highest spatial resolution of tens-of-nanometers corresponding to the size of fibrils made of b-sheets, which are the crystalline building blocks of silk. Results: Nanoscale optical and structural properties of silk have been measured from 100-nm thick longitudinal slices of silk fibers with ~10 nm resolution, the highest so far. Optical sub-wavelength resolution in hyperspectral mapping of absorbance and molecular orientation were carried out for comparison at IR wavelengths 2-10 micrometers using synchrotron radiation. Conclusion: Reliable distinction of transmission changes by only 1-2% due to anisotropy of amide bands was obtained from nano-thin slices of silk.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
Modification of Spin Ice Physics in Ho$_2$Ti$_2$O$_7$ Thin Films
Authors:
Kevin Barry,
Biwen Zhang,
Naween Anand,
Yan Xin,
Arturas Vailionis,
Jennifer Neu,
Colin Heikes,
Charis Cochran,
Haidong Zhou,
Y. Qiu,
William Ratcliff,
Theo Siegrist,
Christianne Beekman
Abstract:
We present an extensive study on the effect of substrate orientation, strain, stoichiometry and defects on spin ice physics in Ho$_2$Ti$_2$O$_7$ thin films grown onto yttria-stabilized-zirconia substrates. We find that growth in different orientations produces different strain states in the films. All films exhibit similar c-axis lattice parameters for their relaxed portions, which are consistentl…
▽ More
We present an extensive study on the effect of substrate orientation, strain, stoichiometry and defects on spin ice physics in Ho$_2$Ti$_2$O$_7$ thin films grown onto yttria-stabilized-zirconia substrates. We find that growth in different orientations produces different strain states in the films. All films exhibit similar c-axis lattice parameters for their relaxed portions, which are consistently larger than the bulk value of 10.10 Å. Transmission electron microscopy reveals anti-site disorder and growth defects to be present in the films, but stuffing is not observed. The amount of disorder depends on the growth orientation, with the (110) film showing the least. Magnetization measurements at 1.8 K show the expected magnetic anisotropy and saturation magnetization values associated with a spin ice for all orientations; shape anisotropy is apparent when comparing in and out-of-plane directions. Significantly, only the (110) oriented films display the hallmark spin ice plateau state in magnetization, albeit less well-defined compared to the plateau observed in a single crystal. Neutron scattering maps on the more disordered (111) oriented films show the Q=0 phase previously observed in bulk materials, but the Q=X phase giving the plateau state remains elusive. We conclude that the spin ice physics in thin films is modified by defects and strain, leading to a reduction in the temperature at which correlations drive the system into the spin ice state.
△ Less
Submitted 20 June, 2019; v1 submitted 16 May, 2018;
originally announced May 2018.
-
Depth-resolved resonant inelastic x-ray scattering at a superconductor/half-metallic ferromagnet interface through standing-wave excitation
Authors:
Cheng-Tai Kuo,
Shih-Chieh Lin,
Giacomo Ghiringhelli,
Yingying Peng,
Gabriella Maria De Luca,
Daniele Di Castro,
Davide Betto,
Mathias Gehlmann,
Tom Wijnands,
Mark Huijben,
Julia Meyer-Ilse,
Eric Gullikson,
Jeffrey B. Kortright,
Arturas Vailionis,
Nicolas Gauquelin,
Johan Verbeeck,
Timm Gerber,
Giuseppe Balestrino,
Nicholas B. Brookes,
Lucio Braicovich,
Charles S. Fadley
Abstract:
We demonstrate that combining standing-wave (SW) excitation with resonant inelastic x-ray scattering (RIXS) can lead to depth resolution and interface sensitivity for studying orbital and magnetic excitations in correlated oxide heterostructures. SW-RIXS has been applied to multilayer heterostructures consisting of a superconductor La$_{1.85}$Sr$_{0.15}$CuO$_{4}$(LSCO) and a half-metallic ferromag…
▽ More
We demonstrate that combining standing-wave (SW) excitation with resonant inelastic x-ray scattering (RIXS) can lead to depth resolution and interface sensitivity for studying orbital and magnetic excitations in correlated oxide heterostructures. SW-RIXS has been applied to multilayer heterostructures consisting of a superconductor La$_{1.85}$Sr$_{0.15}$CuO$_{4}$(LSCO) and a half-metallic ferromagnet La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ (LSMO). Easily observable SW effects on the RIXS excitations were found in these LSCO/LSMO multilayers. In addition, we observe different depth distribution of the RIXS excitations. The magnetic excitations are found to arise from the LSCO/LSMO interfaces, and there is also a suggestion that one of the dd excitations comes from the interfaces. SW-RIXS measurements of correlated-oxide and other multilayer heterostructures should provide unique layer-resolved insights concerning their orbital and magnetic excitations, as well as a challenge for RIXS theory to specifically deal with interface effects.
△ Less
Submitted 6 December, 2018; v1 submitted 27 February, 2018;
originally announced February 2018.
-
Localized Control of Curie Temperature in Perovskite Oxide Film by Capping-layer- induced Octahedral Distortion
Authors:
S. Thomas,
B. Kuiper,
J. Hu,
J. Smit,
Z. Liao,
Z. Zhong,
G. Rijnders,
A. Vailionis,
R. Wu,
G. Koster,
J. Xia
Abstract:
With reduced dimensionality, it is often easier to modify the properties of ultra-thin films than their bulk counterparts. Strain engineering, usually achieved by choosing appropriate substrates, has been proven effective in controlling the properties of perovskite oxide films. An emerging alternative route for developing new multifunctional perovskite is by modification of the oxygen octahedral s…
▽ More
With reduced dimensionality, it is often easier to modify the properties of ultra-thin films than their bulk counterparts. Strain engineering, usually achieved by choosing appropriate substrates, has been proven effective in controlling the properties of perovskite oxide films. An emerging alternative route for developing new multifunctional perovskite is by modification of the oxygen octahedral structure. Here we report the control of structural oxygen octahedral rotation in ultra-thin perovskite SrRuO3 films by the deposition of a SrTiO3 capping layer, which can be lithographically patterned to achieve local control. Using a scanning Sagnac magnetic microscope, we show increase in the Curie temperature of SrRuO3 due to the suppression octahedral rotations revealed by the synchrotron x-ray diffraction. This capping-layer-based technique may open new possibilities for developing functional oxide materials.
△ Less
Submitted 2 October, 2017;
originally announced October 2017.
-
Tuning Perpendicular Magnetic Anisotropy by Oxygen Octahedral Rotations in (La$_{1-x}$Sr$_{x}$MnO$_{3}$)/(SrIrO$_{3}$) Superlattices
Authors:
Di Yi,
Charles L. Flint,
Purnima P. Balakrishnan,
Krishnamurthy Mahalingam,
Brittany Urwin,
Arturas Vailionis,
Alpha T. NDiaye,
Padraic Shafer,
Elke Arenholz,
Yongseong Choi,
Kevin H. Stone,
JiunHaw Chu,
Brandon M. Howe,
Jian Liu,
Ian R. Fisher,
Yuri Suzuki
Abstract:
Perpendicular magnetic anisotropy (PMA) plays a critical role in the development of spintronics, thereby demanding new strategies to control PMA. Here we demonstrate a conceptually new type of interface induced PMA that is controlled by oxygen octahedral rotation. In superlattices comprised of La$_{1-x}$Sr$_{x}$MnO$_{3}$ and SrIrO$_{3}$, we find that all superlattices (0$\leq$x$\leq$1) exhibit fer…
▽ More
Perpendicular magnetic anisotropy (PMA) plays a critical role in the development of spintronics, thereby demanding new strategies to control PMA. Here we demonstrate a conceptually new type of interface induced PMA that is controlled by oxygen octahedral rotation. In superlattices comprised of La$_{1-x}$Sr$_{x}$MnO$_{3}$ and SrIrO$_{3}$, we find that all superlattices (0$\leq$x$\leq$1) exhibit ferromagnetism despite the fact that La$_{1-x}$Sr$_{x}$MnO$_{3}$ is antiferromagnetic for x$>$0.5. PMA as high as 4$\times$10$^6$ erg/cm$^3$ is observed by increasing x and attributed to a decrease of oxygen octahedral rotation at interfaces. We also demonstrate that oxygen octahedral deformation cannot explain the trend in PMA. These results reveal a new degree of freedom to control PMA, enabling discovery of emergent magnetic textures and topological phenomena.
△ Less
Submitted 6 August, 2017; v1 submitted 11 July, 2017;
originally announced July 2017.
-
Tuning Interfacial Ferromagnetism in LaNiO$_3$/CaMnO$_3$ Superlattices by Stabilizing Non-Equilibrium Crystal Symmetry
Authors:
Charles L. Flint,
Arturas Vailionis,
Hua Zhou,
Hoyoung Jang,
Jun-Sik Lee,
Yuri Suzuki
Abstract:
Perovskite oxide heterostructures offer an important path forward for stabilizing and controlling low-dimensional magnetism. One of the guiding design principles for these materials systems is octahedral connectivity. In superlattices composed of perovskites with different crystal symmetries, variation of the relative ratio of the constituent layers as well as the individual layer thicknesses give…
▽ More
Perovskite oxide heterostructures offer an important path forward for stabilizing and controlling low-dimensional magnetism. One of the guiding design principles for these materials systems is octahedral connectivity. In superlattices composed of perovskites with different crystal symmetries, variation of the relative ratio of the constituent layers as well as the individual layer thicknesses gives rise to non-equilibrium crystal symmetries that, in turn, lead to unprecedented control of interfacial ferromagnetism. We have found that in superlattices of CaMnO$_3$ (CMO) and LaNiO$_3$ (LNO), interfacial ferromagnetism can be modulated by a factor of three depending on LNO and CMO layer thicknesses as well as their relative ratio. Such an effect is only possible due to the non-equilibrium crystal symmetries at the interfaces and can be understood in terms of the anisotropy of the exchange interactions and modifications in the interfacial Ni-O-Mn and Mn-O-Mn bond angles and lengths with increasing LNO layer thickness. These results demonstrate the potential of engineering non-equilibrium crystal symmetries in designing ferromagnetism.
△ Less
Submitted 12 May, 2017; v1 submitted 11 April, 2017;
originally announced April 2017.
-
Ultrafast terahertz-field-driven ionic response in ferroelectric BaTiO$_3$
Authors:
F. Chen,
Y. Zhu,
S. Liu,
Y. Qi,
H. Y. Hwang,
N. C. Brandt,
J. Lu,
F. Quirin,
H. Enquist,
P. Zalden,
T. Hu,
J. Goodfellow,
M. -J. Sher,
M. C. Hoffmann,
D. Zhu,
H. Lemke,
J. Glownia,
M. Chollet,
A. R. Damodaran,
J. Park,
Z. Cai,
I. W. Jung,
M. J. Highland,
D. A. Walko,
J. W. Freeland
, et al. (9 additional authors not shown)
Abstract:
The dynamical processes associated with electric field manipulation of the polarization in a ferroelectric remain largely unknown but fundamentally determine the speed and functionality of ferroelectric materials and devices. Here we apply sub-picosecond duration, single-cycle terahertz pulses as an ultrafast electric field bias to prototypical BaTiO$_3$ ferroelectric thin films with the atomic-sc…
▽ More
The dynamical processes associated with electric field manipulation of the polarization in a ferroelectric remain largely unknown but fundamentally determine the speed and functionality of ferroelectric materials and devices. Here we apply sub-picosecond duration, single-cycle terahertz pulses as an ultrafast electric field bias to prototypical BaTiO$_3$ ferroelectric thin films with the atomic-scale response probed by femtosecond x-ray scattering techniques. We show that electric fields applied perpendicular to the ferroelectric polarization drive large amplitude displacements of the titanium atoms along the ferroelectric polarization axis, comparable to that of the built-in displacements associated with the intrinsic polarization and incoherent across unit cells. This effect is associated with a dynamic rotation of the ferroelectric polarization switching on and then off on picosecond timescales. These transient polarization modulations are followed by long-lived vibrational heating effects driven by resonant excitation of the ferroelectric soft mode, as reflected in changes in the c-axis tetragonality. The ultrafast structural characterization described here enables direct comparison with first-principles-based molecular dynamics simulations, with good agreement obtained.
△ Less
Submitted 31 October, 2016; v1 submitted 30 August, 2016;
originally announced August 2016.
-
Enhanced Superconducting Transition Temperature due to Tetragonal Domains in Two-Dimensionally Doped SrTiO$_3$
Authors:
Hilary Noad,
Eric M. Spanton,
Katja C. Nowack,
Hisashi Inoue,
Minu Kim,
Tyler A. Merz,
Christopher Bell,
Yasuyuki Hikita,
Ruqing Xu,
Wenjun Liu,
Arturas Vailionis,
Harold Y. Hwang,
Kathryn A. Moler
Abstract:
Strontium titanate is a low-temperature, non-Bardeen-Cooper-Schrieffer superconductor that superconducts to carrier concentrations lower than in any other system and exhibits avoided ferroelectricity at low temperatures. Neither the mechanism of superconductivity in strontium titanate nor the importance of the structure and dielectric properties for the superconductivity are well understood. We st…
▽ More
Strontium titanate is a low-temperature, non-Bardeen-Cooper-Schrieffer superconductor that superconducts to carrier concentrations lower than in any other system and exhibits avoided ferroelectricity at low temperatures. Neither the mechanism of superconductivity in strontium titanate nor the importance of the structure and dielectric properties for the superconductivity are well understood. We studied the effects of twin structure on superconductivity in a 5.5-nm-thick layer of niobium-doped SrTiO$_{3}$ embedded in undoped SrTiO$_{3}$. We used a scanning superconducting quantum interference device susceptometer to image the local diamagnetic response of the sample as a function of temperature. We observed regions that exhibited a superconducting transition temperature $T_{c}$ $\gtrsim$ 10% higher than the temperature at which the sample was fully superconducting. The pattern of these regions varied spatially in a manner characteristic of structural twin domains. Our results emphasize that the anisotropic dielectric properties of SrTiO$_{3}$ are important for its superconductivity, and need to be considered in any theory of the mechanism of the superconductivity.
△ Less
Submitted 30 May, 2016; v1 submitted 26 May, 2016;
originally announced May 2016.
-
Imaging and Control of Ferromagnetism in a Polar Antiferromagnet
Authors:
X. Renshaw Wang,
C. J. Li,
W. M. Lü,
T. R. Paudel,
D. P. Leusink,
M. Hoek,
Nicola Poccia,
Arturas Vailionis,
T. Venkatesan,
J. M. D. Coey,
E. Y. Tsymbal,
Ariando,
H. Hilgenkamp
Abstract:
Atomically sharp oxide heterostructures often exhibit unusual physical properties that are absent in the constituent bulk materials. The interplay between electrostatic boundary conditions, strain and dimensionality in ultrathin epitaxial films can result in monolayer-scale transitions in electronic or magnetic properties. Here we report an atomically sharp antiferromagnetic-to-ferromagnetic phase…
▽ More
Atomically sharp oxide heterostructures often exhibit unusual physical properties that are absent in the constituent bulk materials. The interplay between electrostatic boundary conditions, strain and dimensionality in ultrathin epitaxial films can result in monolayer-scale transitions in electronic or magnetic properties. Here we report an atomically sharp antiferromagnetic-to-ferromagnetic phase transition when atomically growing polar antiferromagnetic LaMnO3 (001) films on SrTiO3 substrates. For a thickness of five unit cells or less, the films are antiferromagnetic, but for six unit cells or more, the LaMnO3 film undergoes a phase transition to a ferromagnetic state over its entire area, which is visualized by scanning superconducting quantum interference device microscopy. The transition is explained in terms of electronic reconstruction originating from the polar nature of the LaMnO3 (001) films. Our results demonstrate how new emergent functionalities can be visualized and engineered in atomically thick oxide films at the atomic level.
△ Less
Submitted 1 September, 2014;
originally announced September 2014.
-
High temperature magnetic insulating phase in ultrathin La0.67Sr0.33MnO3 films
Authors:
Hans Boschker,
Jaap Kautz,
Evert P. Houwman,
Wolter Siemons,
Mark Huijben,
Dave H. A. Blank,
Gertjan Koster,
Arturas Vailionis,
Guus Rijnders
Abstract:
We present a study of the thickness dependence of magnetism and electrical conductivity in ultra thin La0.67Sr0.33MnO3 films grown on SrTiO3 (110) substrates. We found a critical thickness of 10 unit cells below which the conductivity of the films disappeared and simultaneously the Curie temperature (TC) increased, indicating a magnetic insulating phase at room temperature. These samples have a TC…
▽ More
We present a study of the thickness dependence of magnetism and electrical conductivity in ultra thin La0.67Sr0.33MnO3 films grown on SrTiO3 (110) substrates. We found a critical thickness of 10 unit cells below which the conductivity of the films disappeared and simultaneously the Curie temperature (TC) increased, indicating a magnetic insulating phase at room temperature. These samples have a TC of about 560 K with a significant saturation magnetization of 1.2 +- 0.2 muB/Mn. The canted antiferromagnetic insulating phase in ultra thin films of n< 10 coincides with the occurrence of a higher symmetry structural phase with a different oxygen octahedra rotation pattern. Such a strain engineered phase is an interesting candidate for an insulating tunneling barrier in room temperature spin polarized tunneling devices.
△ Less
Submitted 16 October, 2012;
originally announced October 2012.
-
Unusual size effects on thermoelectricity in a strongly correlated oxide
Authors:
J. Ravichandran,
A. K. Yadav,
W. Siemons,
M. A. McGuire,
V. Wu,
A. Vailionis,
A. Majumdar,
R. Ramesh
Abstract:
We investigated size effects on thermoelectricity in thin films of a strongly correlated layered cobaltate. At room temperature, the thermopower is independent of thickness down to 6 nm. This unusual behavior is inconsistent with the Fuchs-Sondheimer theory, which is used to describe conventional metals and semiconductors, and is attributed to the strong electron correlations in this material. Alt…
▽ More
We investigated size effects on thermoelectricity in thin films of a strongly correlated layered cobaltate. At room temperature, the thermopower is independent of thickness down to 6 nm. This unusual behavior is inconsistent with the Fuchs-Sondheimer theory, which is used to describe conventional metals and semiconductors, and is attributed to the strong electron correlations in this material. Although the resistivity increases, as expected, below a critical thickness of $\sim$ 30 nm. The temperature dependent thermopower is similar for different thicknesses but resistivity shows systematic changes with thickness. Our experiments highlight the differences in thermoelectric behavior of strongly correlated and uncorrelated systems when subjected to finite size effects. We use the atomic limit Hubbard model at the high temperature limit to explain our observations. These findings provide new insights on decoupling electrical conductivity and thermopower in correlated systems.
△ Less
Submitted 30 January, 2012;
originally announced January 2012.
-
Optimized fabrication of high quality La0.67Sr0.33MnO3 thin films considering all essential characteristics
Authors:
H Boschker,
M Huijben,
A Vailionis,
J Verbeeck,
S van Aert,
M Luysberg,
S Bals,
G van Tendeloo,
E P Houwman,
G Koster,
D H A Blank,
G Rijnders
Abstract:
In this article, an overview of the fabrication and properties of high quality La0.67Sr0.33MnO3 (LSMO) thin films is given. A high quality LSMO film combines a smooth surface morphology with a large magnetization and a small residual resistivity, while avoiding precipitates and surface segregation. In literature, typically only a few of these issues are adressed. We therefore present a thorough ch…
▽ More
In this article, an overview of the fabrication and properties of high quality La0.67Sr0.33MnO3 (LSMO) thin films is given. A high quality LSMO film combines a smooth surface morphology with a large magnetization and a small residual resistivity, while avoiding precipitates and surface segregation. In literature, typically only a few of these issues are adressed. We therefore present a thorough characterization of our films, which were grown by pulsed laser deposition. The films were characterized with reflection high energy electron diffraction, atomic force microscopy, x-ray diffraction, magnetization and transport measurements, x-ray photoelectron spectroscopy and scanning transmission electron microscopy. The films have a saturation magnetization of 4.0 μB/Mn, a Curie temperature of 350 K and a residual resistivity of 60 μΩcm. These results indicate that high quality films, combining both large magnetization and small residual resistivity, were realized. A comparison between different samples presented in literature shows that focussing on a single property is insufficient for the optimization of the deposition process. For high quality films, all properties have to be adressed. For LSMO devices, the thin film quality is crucial for the device performance. Therefore, this research is important for the application of LSMO in devices.
△ Less
Submitted 11 March, 2011;
originally announced March 2011.
-
Misfit Strain Accommodation in Epitaxial ABO3 Perovskites: Lattice Rotations and Lattice Modulations
Authors:
A. Vailionis,
H. Boschker,
W. Siemons,
E. P. Houwman,
D. H. A. Blank,
G. Rijnders,
G. Koster
Abstract:
We present a study of the lattice response to the compressive and tensile biaxial stress in La0.67Sr0.33MnO3 (LSMO) and SrRuO3 (SRO) thin films grown on a variety of single crystal substrates: SrTiO3, DyScO3, NdGaO3 and (La,Sr)(Al,Ta)O3. The results show, that in thin films under misfit strain, both SRO and LSMO lattices, which in bulk form have orthorhombic (SRO) and rhombohedral (LSMO) structure…
▽ More
We present a study of the lattice response to the compressive and tensile biaxial stress in La0.67Sr0.33MnO3 (LSMO) and SrRuO3 (SRO) thin films grown on a variety of single crystal substrates: SrTiO3, DyScO3, NdGaO3 and (La,Sr)(Al,Ta)O3. The results show, that in thin films under misfit strain, both SRO and LSMO lattices, which in bulk form have orthorhombic (SRO) and rhombohedral (LSMO) structures, assume unit cells that are monoclinic under compressive stress and tetragonal under tensile stress. The applied stress effectively modifies the BO6 octahedra rotations, which degree and direction can be controlled by magnitude and sign of the misfit strain. Such lattice distortions change the B-O-B bond angles and therefore are expected to affect magnetic and electronic properties of the ABO3 perovskites.
△ Less
Submitted 5 October, 2010; v1 submitted 29 September, 2010;
originally announced September 2010.
-
Uniaxial contribution to the magnetic anisotropy of La0.67Sr0.33MnO3 thin films induced by orthorhombic crystal structure
Authors:
Hans Boschker,
Mercy Mathews,
Peter Brinks,
Evert Houwman,
Arturas Vailionis,
Gertjan Koster,
Dave H. A. Blank,
Guus Rijnders
Abstract:
La0.67Sr0.33MnO3 (LSMO) thin films under compressive strain have an orthorhombic symmetry with (1-10)o and (001)o in-plane orientations. (The subscript o denotes the orthorhombic symmetry.) Here, we grew LSMO on cubic (LaAlO3)0.3-(Sr2AlTaO6)0.7 (LSAT) substrates and observed a uniaxial contribution to the magnetic anisotropy which is related to the orthorhombic crystal structure. Since the lattice…
▽ More
La0.67Sr0.33MnO3 (LSMO) thin films under compressive strain have an orthorhombic symmetry with (1-10)o and (001)o in-plane orientations. (The subscript o denotes the orthorhombic symmetry.) Here, we grew LSMO on cubic (LaAlO3)0.3-(Sr2AlTaO6)0.7 (LSAT) substrates and observed a uniaxial contribution to the magnetic anisotropy which is related to the orthorhombic crystal structure. Since the lattice mismatch is equal in the two directions, the general understanding of anisotropy in LSMO, which relates the uniaxial anisotropy to differences in strain, cannot explain the results. These findings suggest that the oxygen octahedra rotations associated with the orthorhombic structure, possibly resulting in different Mn-O-Mn bond angles and therefore a change in magnetic coupling between the [1-10]o and [001]o directions, determine the anisotropy. We expect these findings to lead to a better understanding of the microscopic origin of the magnetocrystalline anisotropy in LSMO.
△ Less
Submitted 4 September, 2010;
originally announced September 2010.
-
Enhanced superfluid density on twin boundaries in Ba(Fe1-xCox)2As2
Authors:
Beena Kalisky,
John R. Kirtley,
James G. Analytis,
Jiun-Haw Chu,
Arturas Vailionis,
Ian R. Fisher,
Kathryn A. Moler
Abstract:
Superconducting quantum interference device (SQUID) microscopy shows stripes of increased diamagnetic susceptibility in underdoped, but not overdoped, single crystals of Ba(Fe1-xCox)2As2. These stripes of increased diamagnetic susceptibility are consistent with enhanced superfluid density on twin boundaries. Individual vortices avoid pinning on or crossing the stripes, and prefer to travel paral…
▽ More
Superconducting quantum interference device (SQUID) microscopy shows stripes of increased diamagnetic susceptibility in underdoped, but not overdoped, single crystals of Ba(Fe1-xCox)2As2. These stripes of increased diamagnetic susceptibility are consistent with enhanced superfluid density on twin boundaries. Individual vortices avoid pinning on or crossing the stripes, and prefer to travel parallel to them. These results indicate a relationship between superfluid density, local strain, and frustrated magnetism, and demonstrate two mechanisms for enhancing critical currents.
△ Less
Submitted 11 August, 2009; v1 submitted 28 June, 2009;
originally announced June 2009.
-
Room temperature Epitaxial Stabilization of a Tetragonal Phase in ARuO3 (A=Ca,Sr) Thin Films
Authors:
Arturas Vailionis,
Wolter Siemons,
Gertjan Koster
Abstract:
We demonstrate that SrRuO3 and CaRuO3 thin films undergo a room temperature structural phase transition driven by the substrate imposed epitaxial biaxial strain. As tensile strain increases, ARuO3 (A=Ca, Sr) films transform from the orthorhombic phase which is usually observed in bulk SrRuO3 and CaRuO3 at room temperature, into a tetragonal phase which in bulk samples is only stable at higher te…
▽ More
We demonstrate that SrRuO3 and CaRuO3 thin films undergo a room temperature structural phase transition driven by the substrate imposed epitaxial biaxial strain. As tensile strain increases, ARuO3 (A=Ca, Sr) films transform from the orthorhombic phase which is usually observed in bulk SrRuO3 and CaRuO3 at room temperature, into a tetragonal phase which in bulk samples is only stable at higher temperatures. More importantly, we show that the observed phenomenon strongly affects the electronic and magnetic properties of ARuO3 thin films that are grown on different single crystal substrates which in turn offers the possibility to tune these properties.
△ Less
Submitted 13 February, 2008;
originally announced February 2008.
-
Strain-induced single-domain growth of epitaxial SrRuO3 layers on SrTiO3: a high-temperature x-ray diffraction study
Authors:
Arturas Vailionis,
Wolter Siemons,
Gertjan Koster
Abstract:
Temperature dependent structural phase transitions of SrRuO3 thin films epitaxially grown on SrTiO3(001) single crystal substrates have been studied using high-resolution x-ray diffraction. In contrast to bulk SrRuO3, coherently strained epitaxial layers do not display cubic symmetry up to ~730 oC and remain tetragonal. Such behavior is believed to be induced by compressive strain between the Sr…
▽ More
Temperature dependent structural phase transitions of SrRuO3 thin films epitaxially grown on SrTiO3(001) single crystal substrates have been studied using high-resolution x-ray diffraction. In contrast to bulk SrRuO3, coherently strained epitaxial layers do not display cubic symmetry up to ~730 oC and remain tetragonal. Such behavior is believed to be induced by compressive strain between the SrRuO3 layer and SrTiO3 substrate due to lattice mismatch. The tetragonal symmetry during growth explains the single domain growth on miscut SrTiO3 substrates with step edges running along the [100] or [010] direction.
△ Less
Submitted 2 May, 2007;
originally announced May 2007.
-
Direct Observation of Polarization vs. Thickness Relation in Ultra-Thin Ferroelectric Films
Authors:
Rene Meyer,
Arturas Vailionis,
Paul. C. McIntyre
Abstract:
A reduction of polarization in ultra-thin ferroelectric films appears to be fundamental to ferroelectricity at the nanoscale. For the model system PbTiO3 on SrTiO3, we report observation of the polarization vs. thickness relation. Distinct periodicity changes of ferroelectric domains obtained from x-ray diffraction and total energy calculations reveal a linear lowering of the polarization below…
▽ More
A reduction of polarization in ultra-thin ferroelectric films appears to be fundamental to ferroelectricity at the nanoscale. For the model system PbTiO3 on SrTiO3, we report observation of the polarization vs. thickness relation. Distinct periodicity changes of ferroelectric domains obtained from x-ray diffraction and total energy calculations reveal a linear lowering of the polarization below a critical thickness of ~12 nm. Independent polarization and tetragonality measurements provide insight into the fundamental relation between polarization and tetragonality in nanoscale ferroelectrics.
△ Less
Submitted 18 April, 2007;
originally announced April 2007.
-
Dependence of electronic structure of SrRuO3 and the degree of correlation on cation off-stoichiometry
Authors:
Wolter Siemons,
Gertjan Koster,
Arturas Vailionis,
Hideki Yamamoto,
Dave H. A. Blank,
Malcolm R. Beasley
Abstract:
We have grown and studied high quality SrRuO3 films grown by MBE as well as PLD. By changing the oxygen activity during deposition we were able to make SrRuO3 samples that were stoichiometric (low oxygen activity) or with ruthenium vacancies (high oxygen activity). Samples with strontium vacancies were found impossible to produce since the ruthenium would precipitate out as RuO2. The volume of t…
▽ More
We have grown and studied high quality SrRuO3 films grown by MBE as well as PLD. By changing the oxygen activity during deposition we were able to make SrRuO3 samples that were stoichiometric (low oxygen activity) or with ruthenium vacancies (high oxygen activity). Samples with strontium vacancies were found impossible to produce since the ruthenium would precipitate out as RuO2. The volume of the unit cell of SrRuO3 becomes larger as more ruthenium vacancies are introduced. The residual resistivity ratio (RRR) and room temperature resistivity were found to systematically depend on the volume of the unit cell and therefore on the amount of ruthenium vacancies. The RRR varied from ~30 for stoichiometric samples to less than two for samples that were very ruthenium poor. The room temperature resistivity varied from 190 microOhm cm for stoichoimetric samples to over 300 microOhm cm for very ruthenium poor samples. UPS spectra show a shift of weight from the coherent peak to the incoherent peak around the Fermi level when samples have more ruthenium vacancies. Core level XPS spectra of the ruthenium 3d lines show a strong screened part in the case of stoichiometric samples. This screened part disappears when ruthenium vacancies are introduced. Both the UPS and the XPS results are consistent with the view that correlation increases as the amount of ruthenium vacancies increase.
△ Less
Submitted 2 February, 2007;
originally announced February 2007.
