-
Adsorption of Diclofenac and PFBS on Hair Keratin Dimer
Authors:
René Hafner,
Nils Wolfgramm,
Peter Klein,
Herbert M. Urbassek
Abstract:
Environmental pollution by man-made toxic and persistent organic compounds, found throughout the world in surface and groundwater, has various negative effects on aquatic life systems and even humans. Therefore, it is important to develop and improve water treatment technologies capable of removing such substances from wastewater or purifying drinking water. The two substances investigated are the…
▽ More
Environmental pollution by man-made toxic and persistent organic compounds, found throughout the world in surface and groundwater, has various negative effects on aquatic life systems and even humans. Therefore, it is important to develop and improve water treatment technologies capable of removing such substances from wastewater or purifying drinking water. The two substances investigated are the widely used painkiller diclofenac and a member of the class of "forever chemicals", perfluorobutane sulfonate. Both are known to have serious negative effects on living organisms, especially under long-term exposure, and are detectable in human hair, suggesting adsorption to a part of the hair fiber complex. In this study, a human hair keratin dimer is investigated for its ability to absorb diclofenac and perfluorobutane sulfonate. Initial predictions for binding sites are obtained via molecular docking and subjected to molecular dynamics simulations for more than $1$ $\mathrm{μs}$. The binding affinities obtained by the linear interaction energy method are high enough to motivate further research on human hair keratins as a sustainable, low-cost, and easily allocatable filtration material.
△ Less
Submitted 23 October, 2023; v1 submitted 17 October, 2023;
originally announced October 2023.
-
Temperature-dependent magnetism in Fe foams via spin-lattice dynamics
Authors:
Robert Meyer,
Felipe Valencia,
Gonzalo dos Santos,
Romina Aparicio,
Eduardo M. Bringa,
Herbert M. Urbassek
Abstract:
Spin-lattice dynamics is used to study the magnetic properties of Fe foams. The temperature dependence of the magnetization in foams is determined as a function of the fraction of surface atoms in foams, nsurf. The Curie temperature of foams decreases approximately linearly with nsurf, while the critical exponent of the magnetization increases considerably more strongly. If the data are plotted as…
▽ More
Spin-lattice dynamics is used to study the magnetic properties of Fe foams. The temperature dependence of the magnetization in foams is determined as a function of the fraction of surface atoms in foams, nsurf. The Curie temperature of foams decreases approximately linearly with nsurf, while the critical exponent of the magnetization increases considerably more strongly. If the data are plotted as a function of the fraction of surface atoms, reasonable agreement with recent data on vacancy-filled Fe crystals and novel data on void-filled crystals is observed for the critical . Critical temperature and critical exponent also depend on the coordination of surface atoms. Although the decrease we find is relatively small, it hints to the possibility of improved usage of topology to taylor magnetic properties.
△ Less
Submitted 21 April, 2022;
originally announced April 2022.
-
Morphology of graphene flakes in Ni-graphene nanocomposites and its influence on hardness: an atomistic study
Authors:
Vardan Hoviki Vardanyan,
Herbert M. Urbassek
Abstract:
The effect of graphene flakes on the strength of Ni-graphene composites is investigated using molecular dynamics simulation. Rather than introducing flakes as flat structures into the Ni matrix, as it is common in available studies, we introduce them into the heated liquid Ni and let the structures equilibrate in a 14-ns molecular-dynamics run; these structures are then quenched to obtain the comp…
▽ More
The effect of graphene flakes on the strength of Ni-graphene composites is investigated using molecular dynamics simulation. Rather than introducing flakes as flat structures into the Ni matrix, as it is common in available studies, we introduce them into the heated liquid Ni and let the structures equilibrate in a 14-ns molecular-dynamics run; these structures are then quenched to obtain the composites. By varying the interaction of flake edge atoms with the Ni matrix, two different flake morphologies -- wrinkled vs flat -- are obtained. The mechanical properties, and in particular the composite hardness, are investigated by a simulated nanoindentation test. The flake morphology affects the plastic activity and the hardness of the composites. Wrinkled flakes show a higher potential in absorbing dislocations than flat flakes, resulting in a considerably reduced hardness of the composite. No effect of the changed interaction between graphene edge atoms and the Ni matrix on the dislocation activity and hardness could be observed. Furthermore, we demonstrate that a high graphene content in the plastic zone leads to an increased dislocation absorption and weakens the composite.
△ Less
Submitted 4 August, 2021;
originally announced August 2021.
-
Structure and size of the plastic zone formed during nanoindentation of a metallic glass
Authors:
Karina E. Avila,
Stefan Küchemann,
Herbert M. Urbassek
Abstract:
Using molecular dynamics simulation, we study the plastic zone created during nanoindentation of a large CuZr glass system. The plastic zone consists of a core region, in which virtually every atom undergoes plastic rearrangement, and a tail, where the density distribution of the plastically active atoms decays to zero. Compared to crystalline substrates, the plastic zone in metallic glasses is si…
▽ More
Using molecular dynamics simulation, we study the plastic zone created during nanoindentation of a large CuZr glass system. The plastic zone consists of a core region, in which virtually every atom undergoes plastic rearrangement, and a tail, where the density distribution of the plastically active atoms decays to zero. Compared to crystalline substrates, the plastic zone in metallic glasses is significantly smaller than in crystals. The so-called plastic-zone size factor, which relates the radius of the plastic zone to the contact radius of the indenter with the substrate, assumes values around 1, while in crystals -- depending on the crystal structure -- values of 2--3 are common. The small plastic zone in metallic glasses is caused by the essentially homogeneous deformation in the amorphous matrix, while in crystals heterogeneous dislocations prevail, whose growth leads to a marked extension of the plastic zone.
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
Nanoscratching of metallic glasses -- An atomistic study
Authors:
Karina E. Avila,
Stefan Küchemann,
Iyad Alabd Alhafez,
Herbert M. Urbassek
Abstract:
Tribological properties of materials play an important role in engineering applications. Up to now, a number of experimental studies have identified correlations between tribological parameters and the mechanical response. Using molecular dynamics simulations, we study abrasive wear behavior via nanoscratching of a Cu$_{64.5}$Zr$_{35.5}$ metallic glass. The evolution of the normal and transverse f…
▽ More
Tribological properties of materials play an important role in engineering applications. Up to now, a number of experimental studies have identified correlations between tribological parameters and the mechanical response. Using molecular dynamics simulations, we study abrasive wear behavior via nanoscratching of a Cu$_{64.5}$Zr$_{35.5}$ metallic glass. The evolution of the normal and transverse forces and hardness values follows the behavior well known for crystalline substrates. In particular, the generation of the frontal pileup weakens the response of the material to the scratching tip and leads to a decrease of the transverse hardness as compared to the normal hardness. However, metallic glasses soften with increasing temperature, particularly above the glass transition temperature thus showing a higher tendency to structurally relax an applied stress. This plastic response is analyzed focusing on local regions of atoms which underwent strong von-Mises strains, since these are the basis of shear-transformation zones and shear bands. The volume occupied by these atoms increases with temperature, but large increases are only observed above the glass transition temperature. We quantify the generation of plasticity by the concept of plastic efficiency, which relates the generation of plastic volume inside the sample with the formation of external damage, viz. the scratch groove. In comparison to nanoindentation, the generation rate of the plastic volume during nanoscratching is significantly temperature dependent making the glass inside more damage-tolerant at lower temperature but more damage-susceptible at elevated temperatures.
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
Nanoscratching of iron: a novel approach to characterize dislocation microstructures
Authors:
Nina Gunkelmann,
Iyad Alabd Alhafez,
Dominik Steinberger,
Herbert M. Urbassek,
Stefan Sandfeld
Abstract:
A new approach for characterizing the dislocation microstructure obtained from atomistic simulations is introduced, which relies on converting properties of discrete lines to continuous data. This data is represented by a number of density and density-like field variables containing detailed information about properties of the dislocation microstructure. Applying this methodology to atomistic simu…
▽ More
A new approach for characterizing the dislocation microstructure obtained from atomistic simulations is introduced, which relies on converting properties of discrete lines to continuous data. This data is represented by a number of density and density-like field variables containing detailed information about properties of the dislocation microstructure. Applying this methodology to atomistic simulations of nanoscratching in iron reveals a pronounced "length scale effect": With increasing scratching length the number of dislocations increases but the density of geometrically necessary dislocations remains constant resulting in decreasing shear stress. During scratching dislocations are mostly generated at the scratch front. The nucleation rate versus scratching length has an approximately antisymmetric shape with respect to the scratch front leading to an almost constant curvature.
△ Less
Submitted 22 May, 2017; v1 submitted 1 February, 2017;
originally announced February 2017.
-
Contact angle of sessile drops in Lennard-Jones systems
Authors:
Stefan Becker,
Herbert M. Urbassek,
Martin Horsch,
Hans Hasse
Abstract:
Molecular dynamics simulation is used for studying the contact angle of nanoscale sessile drops on a planar solid wall in a system interacting via the truncated and shifted Lennard-Jones potential. The entire range between total wetting and dewetting is investigated by varying the solid--fluid dispersive interaction energy. The temperature is varied between the triple point and the critical temper…
▽ More
Molecular dynamics simulation is used for studying the contact angle of nanoscale sessile drops on a planar solid wall in a system interacting via the truncated and shifted Lennard-Jones potential. The entire range between total wetting and dewetting is investigated by varying the solid--fluid dispersive interaction energy. The temperature is varied between the triple point and the critical temperature. A correlation is obtained for the contact angle in dependence of the temperature and the dispersive interaction energy. Size effects are studied by varying the number of fluid particles at otherwise constant conditions, using up to 150 000 particles. For particle numbers below 10 000, a decrease of the contact angle is found. This is attributed to a dependence of the solid-liquid surface tension on the droplet size. A convergence to a constant contact angle is observed for larger system sizes. The influence of the wall model is studied by varying the density of the wall. The effective solid-fluid dispersive interaction energy at a contact angle of 90 degrees is found to be independent of temperature and to decrease linearly with the solid density. A correlation is developed which describes the contact angle as a function of the dispersive interaction, the temperature and the solid density. The density profile of the sessile drop and the surrounding vapor phase is described by a correlation combining a sigmoidal function and an oscillation term.
△ Less
Submitted 25 July, 2015;
originally announced July 2015.
-
Influence of crystal anisotropy on elastic deformation and onset of plasticity in nanoindentation -- a simulational study
Authors:
Gerolf Ziegenhain,
Herbert M. Urbassek,
Alexander Hartmaier
Abstract:
Using molecular-dynamics simulation and finite-element modelling, we simulate nanoindentation into the three principal surfaces -- the (100), (110) and (111) surface -- of Cu and Al. In the elastic regime, the simulation data agree fairly well with the linear elastic theory of indentation into an elastically anisotropic substrate. With increasing indentation, the effect of pressure hardening bec…
▽ More
Using molecular-dynamics simulation and finite-element modelling, we simulate nanoindentation into the three principal surfaces -- the (100), (110) and (111) surface -- of Cu and Al. In the elastic regime, the simulation data agree fairly well with the linear elastic theory of indentation into an elastically anisotropic substrate. With increasing indentation, the effect of pressure hardening becomes visible. When the critical stress for dislocation nucleation is reached, even the elastically isotropic Al shows a strong dependence of the surface orientation on the force-displacement curves. After the load drop, when plasticity ahs set in, the influence of the surface orientation is lost, and the contact pressure (hardness) becomes independent of the surface orientation.
△ Less
Submitted 9 December, 2008;
originally announced December 2008.
-
Cluster-induced crater formation
Authors:
Christian Anders,
Gerolf Ziegenhain,
Steffen Zimmermann,
Herbert M. Urbassek
Abstract:
Using molecular-dynamics simulation, we study the crater volumes induced by energetic impacts ($v= 1- 250$ km/s) of projectiles containing up to N=1000 atoms. We find that for Lennard-Jones bonded material the crater volume depends solely on the total impact energy $E$. Above a threshold $\Eth$, the volume rises linearly with $E$. Similar results are obtained for metallic materials. By scaling t…
▽ More
Using molecular-dynamics simulation, we study the crater volumes induced by energetic impacts ($v= 1- 250$ km/s) of projectiles containing up to N=1000 atoms. We find that for Lennard-Jones bonded material the crater volume depends solely on the total impact energy $E$. Above a threshold $\Eth$, the volume rises linearly with $E$. Similar results are obtained for metallic materials. By scaling the impact energy $E$ to the target cohesive energy $U$, the crater volumes become independent of the target material. To a first approximation, the crater volume increases in proportion with the available scaled energy, $V=aE/U$. The proportionality factor $a$ is termed the cratering efficiency and assumes values of around 0.5.
△ Less
Submitted 23 October, 2008;
originally announced October 2008.
-
Pair vs many-body potentials: influence on elastic and plastic behavior in nanoindentation
Authors:
Gerolf Ziegenhain,
Alexander Hartmaier,
Herbert M. Urbassek
Abstract:
Molecular-dynamics simulation can give atomistic information on the processes occurring in nanoindentation experiments. In particular, the nucleation of dislocation loops, their growth, interaction and motion can be studied. We investigate how realistic the interatomic potentials underlying the simulations have to be in order to describe these complex processes. Specifically we investigate nanoi…
▽ More
Molecular-dynamics simulation can give atomistic information on the processes occurring in nanoindentation experiments. In particular, the nucleation of dislocation loops, their growth, interaction and motion can be studied. We investigate how realistic the interatomic potentials underlying the simulations have to be in order to describe these complex processes. Specifically we investigate nanoindentation into a Cu single crystal. We compare simulations based on a realistic many-body interaction potential of the embedded-atom-method type with two simple pair potentials, a Lennard-Jones and a Morse potential. We find that qualitatively many aspects of nanoindentation are fairly well reproduced by the simple pair potentials: elastic regime, critical stress and indentation depth for yielding, dependence on the crystal orientation, and even the level of the hardness. The quantitative deficits of the pair potential predictions can be traced back (i) to the fact that the pair potentials are unable in principle to model the elastic anisotropy of cubic crystals; (ii) as the major drawback of pair potentials we identify the gross underestimation of the stable stacking fault energy. As a consequence these potentials predict the formation of too large dislocation loops, the too rapid expansion of partials, too little cross slip and in consequence a severe overestimation of work hardening.
△ Less
Submitted 9 October, 2008;
originally announced October 2008.
-
Effect of material stiffness on hardness: a computational study based on model potentials
Authors:
Gerolf Ziegenhain,
Herbert M. Urbassek
Abstract:
We investigate the dependence of the hardness of materials on their elastic stiffness. This is possible by constructing a series of model potentials of the Morse type; starting on modelling natural Cu, the model potential exhibit an increased elastic modulus, while keeping all other potential parameters (lattice constant, bond energy) unchanged. Using molecular-dynamics simulation, we perform na…
▽ More
We investigate the dependence of the hardness of materials on their elastic stiffness. This is possible by constructing a series of model potentials of the Morse type; starting on modelling natural Cu, the model potential exhibit an increased elastic modulus, while keeping all other potential parameters (lattice constant, bond energy) unchanged. Using molecular-dynamics simulation, we perform nanoindentation experiments on these model crystals. We find that the crystal hardness scales with the elastic stiffness. Also the load drop, which is experienced when plasticity sets in, increases in proportion to the elastic stiffness, while the yield point, i.e., the indentation at which plasticity sets in, is independent of the elastic stiffness.
△ Less
Submitted 8 August, 2008;
originally announced August 2008.
