Showing 1–47 of 47 results for author: Urbakh, M

Frictional Dissipation and Scaling Laws at van der Waals Interface: The Key Role of Elastic Pinning of Moiré at Edges and Corners

Authors: Xiang Gao, Weidong Yan, Wengen Ouyang, Ze Liu, Michael Urbakh, Oded Hod

Abstract: Van der Waals heterogeneous interfaces are promising candidates for the scaling up of structural superlubricity to meet practical applications. Several factors, however, have been identified that may eliminate superlubricity. Elasticity is one such intrinsic factor, where shear induced lattice reconstruction leads to local interfacial pinning, even at clean pristine contacts. Here, through detaile… ▽ More Van der Waals heterogeneous interfaces are promising candidates for the scaling up of structural superlubricity to meet practical applications. Several factors, however, have been identified that may eliminate superlubricity. Elasticity is one such intrinsic factor, where shear induced lattice reconstruction leads to local interfacial pinning, even at clean pristine contacts. Here, through detailed atomistic simulations, we reveal that incomplete moiré tile pinning at the corners and edges of finite sliders dominates friction from the nano- to the microscales. We further demonstrate that slider shape tailoring and twisting allow to control energy dissipation and its scaling with contact size, thus opening the way to achieve large-scale superlubricity. △ Less

Submitted 7 November, 2024; originally announced November 2024.

Chemifriction and Superlubricity: Friends or Foes?

Authors: Penghua Ying, Xiang Gao, Amir Natan, Michael Urbakh, Oded Hod

Abstract: The mechanisms underlying chemifriction, i.e. the contribution of interfacial bonding to friction in defected twisted graphene interfaces are revealed using fully atomistic machine-learning molecular dynamics simulations. This involves stochastic events of consecutive bond formation and rupture, that are spatially separated but not necessarily independent. A unique shear-induced interlayer atomic… ▽ More The mechanisms underlying chemifriction, i.e. the contribution of interfacial bonding to friction in defected twisted graphene interfaces are revealed using fully atomistic machine-learning molecular dynamics simulations. This involves stochastic events of consecutive bond formation and rupture, that are spatially separated but not necessarily independent. A unique shear-induced interlayer atomic transfer healing mechanism is discovered that can be harnessed to design a run-in procedure to restore superlubric sliding. This mechanism should be manifested as negative differential friction coefficients that are expected to emerge under moderate normal loads. A physically motivated phenomenological model is developed to predict the effects of chemifriction in experimentally relevant sliding velocity regimes. This allows us to identify a distinct transition between logarithmic increase and logarithmic decrease of frictional stress with increasing sliding velocity. While demonstrated for homogeneous graphene interfaces, a similar mechanism is expected to occur in other homogeneous or heterogeneous defected two-dimensional material interfaces. △ Less

Submitted 5 November, 2024; originally announced November 2024.

Comments: 14 pages, 5 figures

Journal ref: J. Phys. Chem. Lett. 16, 2934 (2025)

Emerging chirality and moiré dynamics in twisted layered material heterostructures

Authors: Andrea Silva, Xiang Gao, Melisa M. Gianetti, Roberto Guerra, Nicola Manini, Andrea Vanossi, Michael Urbakh, Oded Hod

Abstract: Moiré superstructures arising at twisted 2D interfaces have recently attracted the attention of the scientific community due to exotic quantum states and unique mechanical and tribological behaviors that they exhibit. Here, we predict the emergence of chiral distortions in twisted layered interfaces of finite dimensions. This phenomenon originates in intricate interplay between interfacial interac… ▽ More Moiré superstructures arising at twisted 2D interfaces have recently attracted the attention of the scientific community due to exotic quantum states and unique mechanical and tribological behaviors that they exhibit. Here, we predict the emergence of chiral distortions in twisted layered interfaces of finite dimensions. This phenomenon originates in intricate interplay between interfacial interactions and contact boundary constraints. A metric termed the fractional chiral area, is introduced to quantify the overall chirality of the moiré superstructure and to characterize its spatial distribution. Despite the equilibrium nature of the discovered energetic and structural chirality effects they are shown to be manifested in the twisting dynamics of layered interfaces, which demonstrates a continuous transition from stick-slip to smooth rotation with no external trigger. △ Less

Submitted 15 October, 2024; originally announced October 2024.

Comments: Accepted in ACS Nano

Journal ref: ACS Nano 2024, 18, 45, 30957-30965

Polarization Saturation in Multi-layered Interfacial Ferroelectrics

Authors: Wei Cao, Swarup Deb, Maayan Vizner Stern, Noam Raab, Michael Urbakh, Oded Hod, Leeor Kronik, Moshe Ben Shalom

Abstract: Van der Waals (vdW) polytypes of broken inversion and mirror symmetries were recently shown to exhibit switchable electric polarization even at the ultimate two-layer thin limit. Their out-of-plane polarization was found to accumulate in a ladder-like fashion with each successive layer, offering 2D building blocks for the bottom-up construction of 3D ferroelectrics. Here, we demonstrate experiment… ▽ More Van der Waals (vdW) polytypes of broken inversion and mirror symmetries were recently shown to exhibit switchable electric polarization even at the ultimate two-layer thin limit. Their out-of-plane polarization was found to accumulate in a ladder-like fashion with each successive layer, offering 2D building blocks for the bottom-up construction of 3D ferroelectrics. Here, we demonstrate experimentally that beyond a critical stack thickness, the accumulated polarization in rhombohedral polytypes of molybdenum disulfide (r-MoS2) saturates. The underlying saturation mechanism, deciphered via DFT and self-consistent Poisson-Schrödinger calculations, point to a purely electronic redistribution involving: (1) polarization-induced bandgap closure that allows for cross-stack charge transfer and the emergence of free surface charge; (2) reduction of the polarization saturation value, as well as the critical thickness at which it is obtained, by the presence of free carriers. The resilience of polar layered structures to atomic surface reconstruction, which is essentially unavoidable in polar 3D crystals, potentially allows for the design of new devices with mobile surface charges. Our findings, which are of general nature, should be accounted for when designing switching and/or conductive devices based on ferroelectric layered materials. △ Less

Submitted 29 July, 2024; originally announced July 2024.

Ultra-Long Homochiral Graphene Nanoribbons Grown Within h-BN Stacks for High-Performance Electronics

Authors: Bosai Lyu, Jiajun Chen, Sen Wang, Shuo Lou, Peiyue Shen, Jingxu Xie, Lu Qiu, Izaac Mitchell, Can Li, Cheng Hu, Xianliang Zhou, Kenji Watanabe, Takashi Taniguchi, Xiaoqun Wang, Jinfeng Jia, Qi Liang, Guorui Chen, Tingxin Li, Shiyong Wang, Wengen Ouyang, Oded Hod, Feng Ding, Michael Urbakh, Zhiwen Shi

Abstract: Van der Waals encapsulation of two-dimensional materials within hexagonal boron nitride (h-BN) stacks has proven to be a promising way to create ultrahigh-performance electronic devices. However, contemporary approaches for achieving van der Waals encapsulation, which involve artificial layer stacking using mechanical transfer techniques, are difficult to control, prone to contamination, and unsca… ▽ More Van der Waals encapsulation of two-dimensional materials within hexagonal boron nitride (h-BN) stacks has proven to be a promising way to create ultrahigh-performance electronic devices. However, contemporary approaches for achieving van der Waals encapsulation, which involve artificial layer stacking using mechanical transfer techniques, are difficult to control, prone to contamination, and unscalable. Here, we report on the transfer-free direct growth of high-quality graphene nanoribbons (GNRs) within h-BN stacks. The as-grown embedded GNRs exhibit highly desirable features being ultralong (up to 0.25 mm), ultranarrow ( < 5 nm), and homochiral with zigzag edges. Our atomistic simulations reveal that the mechanism underlying the embedded growth involves ultralow GNR friction when sliding between AA'-stacked h-BN layers. Using the grown structures, we demonstrate the transfer-free fabrication of embedded GNR field-effect devices that exhibit excellent performance at room temperature with mobilities of up to 4,600 $cm^{2} V^{-1} s^{-1}$ and on-off ratios of up to $10^{6}$. This paves the way to the bottom-up fabrication of high-performance electronic devices based on embedded layered materials. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Shape-dependent friction scaling laws in twisted layered material interfaces

Authors: Weidong Yan, Xiang Gao, Wengen Ouyang, Ze Liu, Oded Hod, Michael Urbakh

Abstract: Static friction induced by moiré superstructure in twisted incommensurate finite layered material interfaces reveals unique double periodicity and lack of scaling with contact size. The underlying mechanism involves compensation of incomplete moiré tiles at the rim of rigid polygonal graphene flakes sliding atop fixed graphene or h-BN substrates. The scaling of friction (or lack thereof) with cont… ▽ More Static friction induced by moiré superstructure in twisted incommensurate finite layered material interfaces reveals unique double periodicity and lack of scaling with contact size. The underlying mechanism involves compensation of incomplete moiré tiles at the rim of rigid polygonal graphene flakes sliding atop fixed graphene or h-BN substrates. The scaling of friction (or lack thereof) with contact size is found to strongly depend on the shape of the slider and the relative orientation between its edges and the emerging superstructure, partially rationalizing scattered experimental data. With careful consideration of the flake edge orientation, twist angle, and sliding direction along the substrate, one should therefore be able to achieve large-scale superlubricity via shape tailoring. △ Less

Submitted 5 August, 2023; originally announced August 2023.

Anisotropic Interlayer Force Field for Group-VI Transition Metal Dichalcogenides

Authors: Wenwu Jiang, Reut Sofer, Xiang Gao, Alexandre Tkatchenko, Leeor Kronik, Wengen Ouyang, Michael Urbakh, Oded Hod

Abstract: An anisotropic interlayer force field that describes the interlayer interactions in homogeneous and heterogeneous interfaces of group-VI transition metal dichalcogenides (MX2 where M = Mo, W and X = S, Se) is presented. The force field is benchmarked against density functional theory calculations for bilayer systems within the Heyd-Scuseria-Ernzerhof hybrid density functional approximation, augmen… ▽ More An anisotropic interlayer force field that describes the interlayer interactions in homogeneous and heterogeneous interfaces of group-VI transition metal dichalcogenides (MX2 where M = Mo, W and X = S, Se) is presented. The force field is benchmarked against density functional theory calculations for bilayer systems within the Heyd-Scuseria-Ernzerhof hybrid density functional approximation, augmented by a nonlocal many-body dispersion treatment of long-range correlation. The parametrization yields good agreement with reference calculations of binding energy curves and sliding potential energy surfaces. It is found to be transferable to TMD junctions outside the training set that contain the same atom types. Calculated bulk moduli agree with most previous dispersion corrected DFT predictions, which underestimate available experimental values. Calculated phonon spectra of the various junctions under consideration demonstrate the importance of appropriately treating the anisotropic nature of layered interfaces. Considering our previous parameterization for MoS2, the interlayer potential enables accurate and efficient large-scale simulations of the dynamical, tribological, and thermal transport properties of a large set of homogeneous and heterogeneous TMD interfaces. △ Less

Submitted 23 July, 2023; v1 submitted 20 July, 2023; originally announced July 2023.

Spontaneous Electric Polarization in Graphene Polytypes

Authors: Simon Salleh Atri, Wei Cao, Bar Alon, Nirmal Roy, Maayan Vizner Stern, Vladimir Falko, Moshe Goldstein, Leeor Kronik, Michael Urbakh, Oded Hod, Moshe Ben Shalom

Abstract: A crystalline solid is a periodic sequence of identical cells, each containing one or more atoms. If the constituting unit cell is not centrosymmetric, charge may distribute unevenly between the atoms, resulting in internal electric polarization. This effect serves as the basis for numerous ferroelectric, piezoelectric, and pyroelectric phenomena. In nearly all polar materials, including multilaye… ▽ More A crystalline solid is a periodic sequence of identical cells, each containing one or more atoms. If the constituting unit cell is not centrosymmetric, charge may distribute unevenly between the atoms, resulting in internal electric polarization. This effect serves as the basis for numerous ferroelectric, piezoelectric, and pyroelectric phenomena. In nearly all polar materials, including multilayered van der Waals stacks that were recently found to exhibit interfacial polarization, inversion symmetry is broken by having two or more atomic species within the unit cell. Here, we show that even elemental crystals, consisting of one type of atom, and composed of non-polar centrosymmetric layers, exhibit electric polarization if arranged in an appropriate three-dimensional architecture. This concept is demonstrated here for inversion and mirror asymmetric mixed-stacking tetra-layer polytypes of non-polar graphene sheets. Furthermore, we find that the room temperature out-of-plane electric polarization increases with external electrostatic doping, rather than decreases owing to screening. Using first-principles calculations, as well as tight-binding modeling, we unveil the origin of polytype-induced polarization and its dependence on doping. Extension of this idea to graphene multilayers suggests that solely by lateral shifts of constituent monolayers one can obtain multiple meta-stable interlayer stacking sequences that may allow for even larger electrical polarization. △ Less

Submitted 18 May, 2023; originally announced May 2023.

Electric-field frictional effects in confined zwitterionic molecules

Authors: Melisa M. Gianetti, Roberto Guerra, Andrea Vanossi, Michael Urbakh, Nicola Manini

Abstract: We theoretically explore the effect of a transverse electric field on the frictional response of a bi-layer of packed zwitterionic molecules. The dipole-moment reorientation promoted by the electric field can lead to either stick-slip or smooth sliding dynamics, with average shear stress values varying over a wide range. A structure-property relation is revealed by investigating the array of molec… ▽ More We theoretically explore the effect of a transverse electric field on the frictional response of a bi-layer of packed zwitterionic molecules. The dipole-moment reorientation promoted by the electric field can lead to either stick-slip or smooth sliding dynamics, with average shear stress values varying over a wide range. A structure-property relation is revealed by investigating the array of molecules and their mutual orientation and interlocking. Moreover, the thermal friction enhancement previously observed in these molecules is shown to be suppressed by the electric field, recovering the expected thermolubricity at large-enough fields. The same holds for other basic tribological quantities, such as the external load, which can influence friction in opposite ways depending on the strength of the applied electric field. Our findings open a route for the reversible control of friction forces via electric polarization of the sliding surface. △ Less

Submitted 9 June, 2023; v1 submitted 27 January, 2023; originally announced January 2023.

Journal ref: Phys. Chem. Chem. Phys. 25, 19037 (2023)

Cumulative Polarization Coexisting with Conductivity at Interfacial Ferroelectrics

Authors: Swarup Deb, Wei Cao, Noam Raab, Kenji Watanabe, Takashi Taniguchi, Moshe Goldstein, Leeor Kronik, Michael Urbakh, Oded Hod, Moshe Ben Shalom

Abstract: Ferroelectricity in atomically thin bilayer structures has been recently predicted1 and measured[2-4] in two-dimensional (2D) materials with hexagonal non-centrosymmetric unit-cells. Interestingly, the crystal symmetry translates lateral shifts between parallel 2D layers to a change of sign in their out-of-plane electric polarization, a mechanism referred to as "Slide-Tronics"[4]. These observatio… ▽ More Ferroelectricity in atomically thin bilayer structures has been recently predicted1 and measured[2-4] in two-dimensional (2D) materials with hexagonal non-centrosymmetric unit-cells. Interestingly, the crystal symmetry translates lateral shifts between parallel 2D layers to a change of sign in their out-of-plane electric polarization, a mechanism referred to as "Slide-Tronics"[4]. These observations, however, have been restricted to switching between only two polarization states under low charge carrier densities[5-12], strongly limiting the practical application of the revealed phenomena[13]. To overcome these issues, one needs to explore the nature of the polarization that arises in multi-layered van der Waals (vdW) stacks, how it is governed by intra- and inter-layer charge redistribution, and to which extent it survives the introduction of mobile charge carriers, all of which are presently unknown14. To explore these questions, we conduct surface potential measurements of parallel WSe2 and MoS2 multi-layers with aligned and anti-aligned configurations of the polar interfaces. We find evenly spaced, nearly decoupled potential steps, indicating highly confined interfacial electric fields, which provide means to design multi-state "ladder ferroelectrics". Furthermore, we find that the internal polarization remains significant upon electrostatic doping of a mobile charge carrier density as high as 1013 cm-2, with substantial in-plane conductivity. Using first-principles calculations based on density functional theory (DFT), we trace the extra charge redistribution in real and momentum space and identify an eventual doping-induced depolarization mechanism. △ Less

Submitted 24 June, 2022; originally announced June 2022.

Catalytic growth of ultralong graphene nanoribbons on insulating substrates

Authors: Bosai Lyu, Jiajun Chen, Shuo Lou, Can Li, Lu Qiu, Wengen Ouyang, Jingxu Xie, Izaac Mitchell, Tongyao Wu, Aolin Deng, Cheng Hu, Xianliang Zhou, Peiyue Shen, Saiqun Ma, Zhenghan Wu, Kenji Watanabe, Takashi Taniguchi, Xiaoqun Wang, Qi Liang, Jinfeng Jia, Michael Urbakh, Oded Hod, Feng Ding, Shiyong Wang, Zhiwen Shi

Abstract: Graphene nanoribbons (GNRs) with widths of a few nanometres are promising candidates for future nano-electronic applications due to their structurally tunable bandgaps, ultrahigh carrier mobilities, and exceptional stability. However, the direct growth of micrometre-long GNRs on insulating substrates, which is essential for the fabrication of nano-electronic devices, remains an immense challenge.… ▽ More Graphene nanoribbons (GNRs) with widths of a few nanometres are promising candidates for future nano-electronic applications due to their structurally tunable bandgaps, ultrahigh carrier mobilities, and exceptional stability. However, the direct growth of micrometre-long GNRs on insulating substrates, which is essential for the fabrication of nano-electronic devices, remains an immense challenge. Here, we report the epitaxial growth of GNRs on an insulating hexagonal boron nitride (h-BN) substrate through nanoparticle-catalysed chemical vapor deposition (CVD). Ultra-narrow GNRs with lengths of up to 10 μm are synthesized. Remarkably, the as-grown GNRs are crystallographically aligned with the h-BN substrate, forming one-dimensional (1D) moiré superlattices. Scanning tunnelling microscopy reveals an average width of 2 nm and a typical bandgap of ~1 eV for similar GNRs grown on conducting graphite substrates. Fully atomistic computational simulations support the experimental results and reveal a competition between the formation of GNRs and carbon nanotubes (CNTs) during the nucleation stage, and van der Waals sliding of the GNRs on the h-BN substrate throughout the growth stage. Our study provides a scalable, single-step method for growing micrometre-long narrow GNRs on insulating substrates, thus opening a route to explore the performance of high-quality GNR devices and the fundamental physics of 1D moiré superlattices. △ Less

Submitted 27 May, 2022; originally announced May 2022.

Thermal Friction Enhancement in Zwitterionic Monolayers

Authors: Melisa M. Gianetti, Roberto Guerra, Andrea Vanossi, Michael Urbakh, Nicola Manini

Abstract: We introduce a model for zwitterionic monolayers and investigate its tribological response to changes in applied load, sliding velocity, and temperature by means of molecular-dynamics simulations. The proposed model exhibits different regimes of motion depending on temperature and sliding velocity. We find a remarkable increase of friction with temperature, which we attribute to the formation and… ▽ More We introduce a model for zwitterionic monolayers and investigate its tribological response to changes in applied load, sliding velocity, and temperature by means of molecular-dynamics simulations. The proposed model exhibits different regimes of motion depending on temperature and sliding velocity. We find a remarkable increase of friction with temperature, which we attribute to the formation and rupture of transient bonds between individual molecules of opposite sliding layers, triggered by the out-of-plane thermal fluctuations of the molecules' orientations. To highlight the effect of the molecular charges, we compare these results with analogous simulations for the charge-free system. These findings are expected to be relevant to nanoscale rheology and tribology experiments of locally-charged lubricated systems such as, e.g., experiments performed on zwitterionic monolayers, phospholipid micelles, or confined polymeric brushes in a surface force apparatus. △ Less

Submitted 28 January, 2022; v1 submitted 18 November, 2021; originally announced November 2021.

Parity-Dependent Moiré Superlattices in Graphene/h-BN Heterostructures: A Route to Mechanomutable Metamaterials

Authors: Wengen Ouyang, Oded Hod, Michael Urbakh

Abstract: The superlattice of alternating graphene/h-BN few-layered heterostructures is found to exhibit strong dependence on the parity of the number of layers within the stack. Odd-parity systems show a unique flamingo-like pattern, whereas their even-parity counterparts exhibit regular hexagonal or rectangular superlattices. When the alternating stack consists of seven layers or more, the flamingo patter… ▽ More The superlattice of alternating graphene/h-BN few-layered heterostructures is found to exhibit strong dependence on the parity of the number of layers within the stack. Odd-parity systems show a unique flamingo-like pattern, whereas their even-parity counterparts exhibit regular hexagonal or rectangular superlattices. When the alternating stack consists of seven layers or more, the flamingo pattern becomes favorable, regardless of parity. Notably, the out-of-plane corrugation of the system strongly depends on the shape of the superstructure resulting in significant parity dependence of its mechanical properties. The predicted phenomenon originates in an intricate competition between moiré patterns developing at the interface of consecutive layers. This mechanism is of general nature and is expected to occur in other alternating stacks of closely matched rigid layered materials as demonstrated for homogeneous alternating junctions of twisted graphene and h-BN. Our findings thus allow for the rational design of mechanomutable metamaterials based on Van der Waals heterostructures. △ Less

Submitted 14 November, 2020; originally announced November 2020.

Comments: 31 pages, 17 figures

Journal ref: Phys. Rev. Lett. 126, 216101 (2021)

Interfacial Ferroelectricity by van-der-Waals Sliding

Authors: Maayan Vizner Stern, Yuval Waschitz, Wei Cao, Iftach Nevo, Kenji Watanabe, Takashi Taniguchi, Eran Sela, Michael Urbakh, Oded Hod, Moshe Ben Shalom

Abstract: Despite their ionic nature, many layered diatomic crystals avoid internal electric polarization by forming a centrosymmetric lattice at their optimal anti-parallel van-der-Waals stacking. Here, we report a stable ferroelectric order emerging at the interface between two naturally-grown flakes of hexagonal-boron-nitride, which are stacked together in a metastable non-centrosymmetric parallel orient… ▽ More Despite their ionic nature, many layered diatomic crystals avoid internal electric polarization by forming a centrosymmetric lattice at their optimal anti-parallel van-der-Waals stacking. Here, we report a stable ferroelectric order emerging at the interface between two naturally-grown flakes of hexagonal-boron-nitride, which are stacked together in a metastable non-centrosymmetric parallel orientation. We observe alternating domains of inverted normal polarization, caused by a lateral shift of one lattice site between the domains. Reversible polarization switching coupled to lateral sliding is achieved by scanning a biased tip above the surface. Our calculations trace the origin of the phenomenon to a subtle interplay between charge redistribution and ionic displacement, and our minimal cohesion model predicts further venues to explore the unique "slidetronics" switching. △ Less

Submitted 11 October, 2020; originally announced October 2020.

Sliding Over Graphene Grain Boundaries: A Step Towards Macroscale Superlubricity

Authors: Xiang Gao, Wengen Ouyang, Oded Hod, Michael Urbakh

Abstract: In light of the race towards macroscale superlubricity of graphitic contacts, the effect of grain boundaries on their frictional properties becomes of central importance. Here, we elucidate the unique frictional mechanisms characterizing topological defects along typical grain boundaries that can vary from being nearly flat to highly corrugated, depending on the boundary misfit angle. We find that… ▽ More In light of the race towards macroscale superlubricity of graphitic contacts, the effect of grain boundaries on their frictional properties becomes of central importance. Here, we elucidate the unique frictional mechanisms characterizing topological defects along typical grain boundaries that can vary from being nearly flat to highly corrugated, depending on the boundary misfit angle. We find that frictional energy dissipation over grain boundaries can originate from variations of compressibility along the surface, heat produced during defect (un)buckling events, and elastic energy storage in irreversible buckling processes. These may lead to atypical non-monotonic dependence of the averaged friction on the normal load. The knowledge gained in the present study constitutes an important step towards the realization of superlubricity in macroscopic graphitic contacts. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Controllable Thermal Conductivity in Twisted Homogeneous Interfaces of Graphene and Hexagonal Boron Nitride

Authors: Wengen Ouyang, Huasong Qin, Michael Urbakh, Oded Hod

Abstract: Thermal conductivity of homogeneous twisted stacks of graphite is found to strongly depend on the misfit angle. The underlying mechanism relies on the angle dependence of phonon-phonon couplings across the twisted interface. Excellent agreement between the calculated thermal conductivity of narrow graphitic stacks and corresponding experimental results indicates the validity of the predictions. Th… ▽ More Thermal conductivity of homogeneous twisted stacks of graphite is found to strongly depend on the misfit angle. The underlying mechanism relies on the angle dependence of phonon-phonon couplings across the twisted interface. Excellent agreement between the calculated thermal conductivity of narrow graphitic stacks and corresponding experimental results indicates the validity of the predictions. This is attributed to the accuracy of interlayer interactions descriptions obtained by the dedicated registry-dependent interlayer potential used. Similar results for h-BN stacks indicate overall higher conductivity and reduced misfit angle variation. This opens the way for the design of tunable heterogeneous junctions with controllable heat-transport properties ranging from substrate-isolation to efficient heat evacuation. △ Less

Submitted 21 July, 2020; originally announced July 2020.

Comments: 52 pages, 11 figures

Journal ref: Nano Lett. 20, 7513-7518 (2020)

Mechanical and Tribological Properties of Layered Materials Under High Pressure: Assessing the Importance of Many-Body Dispersion Effects

Authors: Wengen Ouyang, Ido Azuri, Davide Mandelli, Alexandre Tkatchenko, Leeor Kronik, Michael Urbakh, Oded Hod

Abstract: The importance of many-body dispersion effects in layered materials subjected to high external loads is evaluated. State-of-the-art many-body dispersion density functional theory calculations performed for graphite, hexagonal boron nitride, and their hetero-structures were used to fit the parameters of a classical registry-dependent interlayer potential. Using the latter, we performed extensive eq… ▽ More The importance of many-body dispersion effects in layered materials subjected to high external loads is evaluated. State-of-the-art many-body dispersion density functional theory calculations performed for graphite, hexagonal boron nitride, and their hetero-structures were used to fit the parameters of a classical registry-dependent interlayer potential. Using the latter, we performed extensive equilibrium molecular dynamics simulations and studied the mechanical response of homogeneous and heterogeneous bulk models under hydrostatic pressures up to 30 GPa. Comparison with experimental data demonstrates that the reliability of the many-body dispersion model extends deep into the sub-equilibrium regime. Friction simulations demonstrate the importance of many-body dispersion effects for the accurate description of the tribological properties of layered materials interfaces under high pressure. △ Less

Submitted 28 December, 2019; v1 submitted 12 December, 2019; originally announced December 2019.

Comments: 40 pages, 18 figures

Journal ref: J. Chem. Theory Comput. 2019

Load-velocity-temperature relationship in frictional response of microscopic contacts

Authors: Wengen Ouyang, Yao Cheng, Ming Ma, Michael Urbakh

Abstract: Frictional properties of interfaces with dynamic chemical bonds have been the subject of intensive experimental investigation and modeling, as it provides important insights into the molecular origin of the empirical rate and state laws, which have been highly successful in describing friction from nano to geophysical scales. Using previously developed theoretical approaches requires time-consumin… ▽ More Frictional properties of interfaces with dynamic chemical bonds have been the subject of intensive experimental investigation and modeling, as it provides important insights into the molecular origin of the empirical rate and state laws, which have been highly successful in describing friction from nano to geophysical scales. Using previously developed theoretical approaches requires time-consuming simulations that are impractical for many realistic tribological systems. To solve this problem and set a framework for understanding microscopic mechanisms of friction at interfaces including multiple microscopic contacts, we developed an analytical approach for description of friction mediated by dynamical formation and rupture of microscopic interfacial contacts, which allows to calculate frictional properties on the time and length scales that are relevant to tribological experimental conditions. The model accounts for the presence of various types of contacts at the frictional interface and predicts novel dependencies of friction on sliding velocity, temperature, and normal load, which are amenable to experimental observations. Our model predicts the velocity-temperature scaling, which relies on the interplay between the effects of shear and temperature on the rupture of interfacial contacts. The proposed scaling can be used to extrapolate the simulation results to a range of very low sliding velocities used in nanoscale friction experiments, which is still unreachable by simulations. For interfaces including two types of interfacial contacts with distinct properties, our model predicts novel double-peaked dependencies of friction on temperature and velocity. Our work provides a promising avenue for the interpretation of the experimental data on friction at interfaces including microscopic contacts and opens new pathways for the rational control of the frictional response. △ Less

Submitted 23 January, 2020; v1 submitted 10 April, 2019; originally announced April 2019.

Comments: 42 pages,12 figures

Journal ref: Journal of the Mechanics and Physics of Solids, 2020

Negative Friction Coefficients in Superlubric Graphite-Hexagonal Boron Nitride Heterojunctions

Authors: Davide Mandelli, Wengen Ouyang, Oded Hod, Michael Urbakh

Abstract: Negative friction coefficients, where friction is reduced upon increasing normal load, are predicted for superlubric graphite-hexagonal boron nitride heterojunctions. The origin of this counterintuitive behavior lies in the load-induced suppression of the moiré superstructure out-of-plane distortions leading to a less dissipative interfacial dynamics. Thermally induced enhancement of the out-of-pl… ▽ More Negative friction coefficients, where friction is reduced upon increasing normal load, are predicted for superlubric graphite-hexagonal boron nitride heterojunctions. The origin of this counterintuitive behavior lies in the load-induced suppression of the moiré superstructure out-of-plane distortions leading to a less dissipative interfacial dynamics. Thermally induced enhancement of the out-of-plane fluctuations leads to an unusual increase of friction with temperature. The highlighted frictional mechanism is of a general nature and is expected to appear in many layered material heterojunctions. △ Less

Submitted 21 February, 2019; originally announced February 2019.

Comments: 34 pages, 16 figures, (file includes Supplemental Material)

Journal ref: Phys. Rev. Lett. 122, 076102 (2019)

Nanoserpents: Graphene Nanoribbons Motion on Two-Dimensional Hexagonal Materials

Authors: Wengen Ouyang, Davide Mandelli, Michael Urbakh, Oded Hod

Abstract: We demonstrate snake-like motion of graphene nanoribbons atop graphene and hexagonal boron nitride (h-BN) substrates using fully-atomistic non-equilibrium molecular dynamics simulations. The sliding dynamics of the edge-pulled nanoribbons is found to be determined by the interplay between in-plane ribbon elasticity and interfacial lattice mismatch. This results in an unusual dependence of the fric… ▽ More We demonstrate snake-like motion of graphene nanoribbons atop graphene and hexagonal boron nitride (h-BN) substrates using fully-atomistic non-equilibrium molecular dynamics simulations. The sliding dynamics of the edge-pulled nanoribbons is found to be determined by the interplay between in-plane ribbon elasticity and interfacial lattice mismatch. This results in an unusual dependence of the friction-force on the ribbon's length, exhibiting an initial linear rise that levels-off above a junction dependent threshold value dictated by the pre-slip stress distribution within the slider. As part of this letter, we present the LAMMPS implementation of the registry-dependent interlayer potentials for graphene, h-BN, and their heterojunctions that were used herein, which provide enhanced performance and accuracy. △ Less

Submitted 25 June, 2018; originally announced June 2018.

Comments: 37 pages, 18 figures

Journal ref: Nano Letters. 18(9), (2018), 6009-6016

Kinetics of Ion Transport in Ionic Liquids: Two Dynamical Diffusion States

Authors: Guang Feng, Ming Chen, Sheng Bi, Zachary A. H. Goodwin, Eugene B. Postnikov, Michael Urbakh, Alexei A. Kornyshev

Abstract: Using classical molecular dynamics simulations, we investigate the mobility of ions in [Bmim][TFSI], a typical room temperature ionic liquid. Analyzing the trajectories of individual cations and anions, we estimate the time that ions spend in bound, clustered states, and when the ions move quasi-freely. Using this information, we evaluate the average portion of free ions that dominate conductivity… ▽ More Using classical molecular dynamics simulations, we investigate the mobility of ions in [Bmim][TFSI], a typical room temperature ionic liquid. Analyzing the trajectories of individual cations and anions, we estimate the time that ions spend in bound, clustered states, and when the ions move quasi-freely. Using this information, we evaluate the average portion of free ions that dominate conductivity. The amount of thus defined free ions comprises 15-25%, monotonically increasing with temperature in the range of 300-600 K, with the rest of the ions being temporarily bound, moving rather in local potentials. The conductivities as a function of temperature, calculated from electric current autocorrelation functions, reproduce reported experimental data well. Interestingly, for free ions the Nernst-Einstein relationship between the mobility and diffusion coefficient holds fairly well. In analogy with electronic semiconductors, one can speak about an ionic semiconductor model for ionic liquids with valence (or excitonic) and conduction band states for ions, separated by an energy gap. The obtained band gap for the ionic liquid is, however, very small, about 0.026 eV, allowing for easy interchanges between the two dynamic states. △ Less

Submitted 2 May, 2018; originally announced May 2018.

Journal ref: Physical Review X, 2019

Static friction boost in edge-driven incommensurate contacts

Authors: Davide Mandelli, Roberto Guerra, Wengen Ouyang, Michael Urbakh, Andrea Vanossi

Abstract: We present a numerical investigation of the size scaling of static friction in incommensurate two dimensional contacts performed for different lateral loading configurations. Results of model simulations show that both the absolute value of the force $F_s$ and the scaling exponent $γ$ strongly depend on the loading configuration adopted to drive the slider along the substrate. Under edge-loading a… ▽ More We present a numerical investigation of the size scaling of static friction in incommensurate two dimensional contacts performed for different lateral loading configurations. Results of model simulations show that both the absolute value of the force $F_s$ and the scaling exponent $γ$ strongly depend on the loading configuration adopted to drive the slider along the substrate. Under edge-loading a sharp increase of static friction is observed above a critical size corresponding to the appearance of a localized commensurate dislocation. Noticeably, the existence of sublinear scaling, which is a fingerprint of superlubricity, does not conflict with the possibility to observe shear-induced localized commensurate regions at the contact interface. Atomistic simulations of gold islands sliding over graphite corroborate these findings suggesting that similar elasticity effects should be at play in real frictional contacts. △ Less

Submitted 30 April, 2018; originally announced May 2018.

Comments: Supplemental Material: 7 pages, 4 figures. Main text: 8 pages, 6 figures

Journal ref: Physical Review Materials 2, 046001 (2018)

Single-molecule theory of enzymatic inhibition predicts the emergence of inhibitor-activator duality

Authors: Tal Robin, Shlomi Reuveni, Michael Urbakh

Abstract: The classical theory of enzymatic inhibition aims to quantitatively describe the effect of certain molecules -- called inhibitors -- on the progression of enzymatic reactions, but growing signs indicate that it must be revised to keep pace with the single-molecule revolution that is sweeping through the sciences. Here, we take the single enzyme perspective and rebuild the theory of enzymatic inhib… ▽ More The classical theory of enzymatic inhibition aims to quantitatively describe the effect of certain molecules -- called inhibitors -- on the progression of enzymatic reactions, but growing signs indicate that it must be revised to keep pace with the single-molecule revolution that is sweeping through the sciences. Here, we take the single enzyme perspective and rebuild the theory of enzymatic inhibition from the bottom up. We find that accounting for multi-conformational enzyme structure and intrinsic randomness cannot undermine the validity of classical results in the case of competitive inhibition; but that it should strongly change our view on the uncompetitive and mixed modes of inhibition. There, stochastic fluctuations on the single-enzyme level could give rise to inhibitor-activator duality -- a phenomenon in which, under some conditions, the introduction of a molecule whose binding shuts down enzymatic catalysis will counter intuitively work to facilitate product formation. We state -- in terms of experimentally measurable quantities -- a mathematical condition for the emergence of inhibitor-activator duality, and propose that it could explain why certain molecules that act as inhibitors when substrate concentrations are high elicit a non-monotonic dose response when substrate concentrations are low. The fundamental and practical implications of our findings are thoroughly discussed. △ Less

Submitted 21 October, 2017; v1 submitted 14 December, 2016; originally announced January 2017.

Journal ref: Nature communications, 9(1), pp.1-9, 2018

Friction and Adhesion mediated by supramolecular host-guest complexes

Authors: Roberto Guerra, Andrea Benassi, Andrea Vanossi, Ming Ma, Michael Urbakh

Abstract: The adhesive and frictional response of an AFM tip connected to a substrate through supramolecular host-guest complexes is investigated by dynamic Monte Carlo simulations. The variation of the pull-off force with the unloading rate recently observed in experiments is here unraveled by evidencing a simultaneous (progressive) break of the bonds at fast (slow) rates. The model reveals the origin of t… ▽ More The adhesive and frictional response of an AFM tip connected to a substrate through supramolecular host-guest complexes is investigated by dynamic Monte Carlo simulations. The variation of the pull-off force with the unloading rate recently observed in experiments is here unraveled by evidencing a simultaneous (progressive) break of the bonds at fast (slow) rates. The model reveals the origin of the observed plateaus in the retraction force as a function of tip-surface distance, showing that they ensue from the tip geometrical features. In lateral sliding, the model exhibits a wide range of dynamic behaviors ranging from smooth sliding to stick-slip at different velocities, with the average friction force determined by the characteristic formation/rupture rates of the complexes. In particular, it is shown that for some molecular complexes friction can become almost constant over a wide range of velocities. Also, we show the possibility to exploit ageing effect through slide-hold-slide experiments, in order to infer the characteristic formation rate. Finally, our model predicts a novel "anti-ageing" effect which is characterized by a decrease of static friction force with the hold time. Such effect is explained in terms of enhancement of adhesion during sliding, especially observed at high driving velocities. △ Less

Submitted 6 April, 2016; originally announced April 2016.

Journal ref: Phys. Chem. Chem. Phys., 2016, 18, 9248

Observation of normal-force-independent superlubricity in mesoscopic graphite contacts

Authors: Cuong Cao Vu, Shoumo Zhang, Michael Urbakh, Qunyang Li, Q. -C. He, Quanshui Zheng

Abstract: We investigate the dependence of friction forces on normal load in incommensurate micrometer size contacts between atomically smooth single-crystal graphite surfaces under ambient conditions. Our experimental results show that these contacts exhibit superlubricity (super-low friction), which is robust against the application of normal load. The measured friction coefficients are essentially zero a… ▽ More We investigate the dependence of friction forces on normal load in incommensurate micrometer size contacts between atomically smooth single-crystal graphite surfaces under ambient conditions. Our experimental results show that these contacts exhibit superlubricity (super-low friction), which is robust against the application of normal load. The measured friction coefficients are essentially zero and independent of the external normal load up to a pressure of 1.67 MPa. The observation of load-independent superlubricity in micro-scale contacts is a promising result for numerous practical applications. △ Less

Submitted 5 September, 2016; v1 submitted 8 February, 2016; originally announced February 2016.

Comments: 15 pages, 3 figures

Journal ref: Phys. Rev. B 94, 081405 (2016)

The breakdown of superlubricity by driving-induced commensurate dislocations

Authors: Andrea Benassi, Ming Ma, Michael Urbakh, Andrea Vanossi

Abstract: In the framework of a Frenkel-Kontorova-like model, we address the robustness of the superlubricity phenomenon in an edge-driven system at large scales, highlighting the dynamical mechanisms leading to its failure due to the slider elasticity. The results of the numerical simulations perfectly match the length critical size derived from a parameter-free analytical model. By considering different d… ▽ More In the framework of a Frenkel-Kontorova-like model, we address the robustness of the superlubricity phenomenon in an edge-driven system at large scales, highlighting the dynamical mechanisms leading to its failure due to the slider elasticity. The results of the numerical simulations perfectly match the length critical size derived from a parameter-free analytical model. By considering different driving and commensurability interface configurations, we explore the distinctive nature of the transition from superlubric to high-friction sliding states which occurs above the critical size, discovering the occurrence of previously undetected multiple dissipative jumps in the friction force as a function of the slider length. These driving-induced commensurate dislocations in the slider are then characterized in relation to their spatial localization and width, depending on the system parameters. Setting the ground to scale superlubricity up, this investigation provides a novel perspective on friction and nanomanipulation experiments and can serve as a theoretical basis for designing high-tech devices with specific superlow frictional features. △ Less

Submitted 14 November, 2015; originally announced November 2015.

Journal ref: Scientific Reports 5 16134 (2015)

The Michaelis-Menten reaction scheme as a unified approach towards the optimal restart problem

Authors: Tal Rotbart, Shlomi Reuveni, Michael Urbakh

Abstract: We study the effect of restart, and retry, on the mean completion time of a generic process. The need to do so arises in various branches of the sciences and we show that it can naturally be addressed by taking advantage of the classical reaction scheme of Michaelis and Menten. Stopping a process in its midst, only to start it all over again, may prolong, leave unchanged, or even shorten the time… ▽ More We study the effect of restart, and retry, on the mean completion time of a generic process. The need to do so arises in various branches of the sciences and we show that it can naturally be addressed by taking advantage of the classical reaction scheme of Michaelis and Menten. Stopping a process in its midst, only to start it all over again, may prolong, leave unchanged, or even shorten the time taken for its completion. Here we are interested in the optimal restart problem, i.e., in finding a restart rate which brings the mean completion time of a process to a minimum. We derive the governing equation for this problem and show that it is exactly solvable in cases of particular interest. We then continue to discover regimes at which solutions to the problem take on universal, details independent, forms which further give rise to optimal scaling laws. The formalism we develop, and the results obtained, can be utilized when optimizing stochastic search processes and randomized computer algorithms. An immediate connection with kinetic proofreading is also noted and discussed. △ Less

Submitted 24 November, 2015; v1 submitted 16 September, 2015; originally announced September 2015.

Journal ref: Phys. Rev. E 92, 060101 (2015)

Electrotunable friction with ionic liquid lubricants: how important is the molecular structure of the ions?

Authors: O. Y. Fajardo, Fernando Bresme, Alexei A. Kornyshev, Michael Urbakh

Abstract: Using non-equilibrium molecular dynamics simulations and a coarse grained model of ionic liquids, we have investigated the impact that the shape and the intramolecular charge distribution of the ions have on the electrotuneable friction with ionic-liquid nanoscale films. We show that the electric-field induces significant structural changes in the film, leading to dramatic modifications of the fri… ▽ More Using non-equilibrium molecular dynamics simulations and a coarse grained model of ionic liquids, we have investigated the impact that the shape and the intramolecular charge distribution of the ions have on the electrotuneable friction with ionic-liquid nanoscale films. We show that the electric-field induces significant structural changes in the film, leading to dramatic modifications of the friction force. Comparison of the present work with previous studies using different models of ionic liquids indicate that the phenomenology presented here applies to a wide range of ionic liquids. In particular, the electric-field-induced shift of the slippage plane from the solid-liquid interface to the interior of the film and the non-monotonic variation of the friction force are common features of ionic lubricants under strong confinement. We also demonstrate that the molecular structure of the ions plays an important role in determining the electrostriction and electroswelling of the confined film, hence showing the importance of ion-specific effects in electrotuneable friction. △ Less

Submitted 23 August, 2015; originally announced August 2015.

Critical length limiting super-low friction

Authors: Ming Ma, Andrea Benassi, Andrea Vanossi, Michael Urbakh

Abstract: Since the demonstration of super-low friction (superlubricity) in graphite at nanoscale, one of the main challenges in the field of nano- and micro-mechanics was to scale this phenomenon up. A key question to be addressed is to what extent superlubricity could persist, and what mechanisms could lead to its failure. Here, using an edge-driven Frenkel-Kontorova model, we establish a connection betwe… ▽ More Since the demonstration of super-low friction (superlubricity) in graphite at nanoscale, one of the main challenges in the field of nano- and micro-mechanics was to scale this phenomenon up. A key question to be addressed is to what extent superlubricity could persist, and what mechanisms could lead to its failure. Here, using an edge-driven Frenkel-Kontorova model, we establish a connection between the critical length above which superlubricity disappears and both intrinsic material properties and experimental parameters. A striking boost in dissipated energy with chain length emerges abruptly due to a high-friction stick-slip mechanism caused by deformation of the slider leading to a local commensuration with the substrate lattice. We derived a parameter-free analytical model for the critical length that is in excellent agreement with our numerical simulations. Our results provide a new perspective on friction and nano-manipulation and can serve as a theoretical basis for designing nano-devices with super-low friction, such as carbon nanotubes. △ Less

Submitted 2 January, 2015; originally announced January 2015.

Comments: Accepted on PRL

Journal ref: Phys. Rev. Lett. 114, 055501 (2015)

Nanoscopic friction under electrochemical control

Authors: A. S. de Wijn, A. Fasolino, A. Filippov, M. Urbakh

Abstract: We propose a theoretical model of friction under electrochemical conditions focusing on the interaction of a force microscope tip with adsorbed polar molecules of which the orientation depends on the applied electric field. We demonstrate that the dependence of friction force on the electric field is determined by the interplay of two channels of energy dissipation: (i) the rotation of dipoles and… ▽ More We propose a theoretical model of friction under electrochemical conditions focusing on the interaction of a force microscope tip with adsorbed polar molecules of which the orientation depends on the applied electric field. We demonstrate that the dependence of friction force on the electric field is determined by the interplay of two channels of energy dissipation: (i) the rotation of dipoles and (ii) slips of the tip over potential barriers. We suggest a promising strategy to achieve a strong dependence of nanoscopic friction on the external field based on the competition between long range electrostatic interactions and short range chemical interactions between tip and adsorbed polar molecules. △ Less

Submitted 25 September, 2013; originally announced September 2013.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 112, 055502 (2014)

Modeling friction: From nanoscale to mesoscale

Authors: Andrea Vanossi, Nicola Manini, Michael Urbakh, Stefano Zapperi, Erio Tosatti

Abstract: The physics of sliding friction is gaining impulse from nanoscale and mesoscale experiments, simulations, and theoretical modeling. This Colloquium reviews some recent developments in modeling and in atomistic simulation of friction, covering open-ended directions, unconventional nanofrictional systems, and unsolved problems. The physics of sliding friction is gaining impulse from nanoscale and mesoscale experiments, simulations, and theoretical modeling. This Colloquium reviews some recent developments in modeling and in atomistic simulation of friction, covering open-ended directions, unconventional nanofrictional systems, and unsolved problems. △ Less

Submitted 3 April, 2013; v1 submitted 14 December, 2011; originally announced December 2011.

Comments: 26 pages, 14 figures, Rev. Mod. Phys. Colloquium

Journal ref: Rev. Mod. Phys. 85, 529 (2013)

Low friction and rotational dynamics of crystalline flakes in solid lubrication

Authors: A. S. de Wijn, A. Fasolino, A. E. Filippov, M. Urbakh

Abstract: Solids at incommensurate contact display low-friction, 'superlubric', sliding. For graphene flakes on a graphite surface, superlubric sliding is only temporary due to rotation of the flakes from incommensurate to commensurate contact with the substrate. We examine this rotational channel of friction in a prototype geometry of meso- and macroscopic solid lubrication. By molecular dynamics simulatio… ▽ More Solids at incommensurate contact display low-friction, 'superlubric', sliding. For graphene flakes on a graphite surface, superlubric sliding is only temporary due to rotation of the flakes from incommensurate to commensurate contact with the substrate. We examine this rotational channel of friction in a prototype geometry of meso- and macroscopic solid lubrication. By molecular dynamics simulations and theoretical arguments we find that two surfaces lubricated by mobile, rotating graphene flakes exhibit stable superlubric sliding as for ideally incommensurate contacts also when they are covered by randomly oriented pinned graphene patches. For commensurate surfaces, we find a low friction state at low temperature where incommensurate states are not destroyed by thermal fluctuations. △ Less

Submitted 11 August, 2011; originally announced August 2011.

Comments: 5 pages, 5 figures

Journal ref: EPL 95 66002 (2011)

Controlling Microscopic Friction through Mechanical Oscillations

Authors: Roberto Guerra, Andrea Vanossi, Michael Urbakh

Abstract: We study in detail the recent suggestions by Tshiprut et al. [Phys. Rev. Lett. 95, 016101 (2005)] to tune tribological properties at the nanoscale by subjecting a substrate to periodic mechanical oscillations. We show that both in stick-slip and sliding regimes of motion friction can be tuned and reduced by controlling the frequency and amplitude of the imposed substrate lateral excitations. We de… ▽ More We study in detail the recent suggestions by Tshiprut et al. [Phys. Rev. Lett. 95, 016101 (2005)] to tune tribological properties at the nanoscale by subjecting a substrate to periodic mechanical oscillations. We show that both in stick-slip and sliding regimes of motion friction can be tuned and reduced by controlling the frequency and amplitude of the imposed substrate lateral excitations. We demonstrate that the mechanisms of oscillation-induced reduction of friction are different for stick-slip and sliding dynamics. In the first regime the effect results from a giant enhancement of surface diffusion, while in the second regime it is due to the interplay between washboard and oscillation frequencies that leads to the occurrence of parametric resonances. Moreover we show that for particular set of parameters it is possible to sustain the motion with the only oscillations. △ Less

Submitted 13 June, 2011; originally announced June 2011.

Journal ref: Physical Review E 78, 036110 (2008)

Stabilizing stick-slip friction

Authors: Rosario Capozza, Shmuel M. Rubinstein, Itay Barel, Michael Urbakh, Jay Fineberg

Abstract: Even the most regular stick-slip frictional sliding is always stochastic, with irregularity in both the intervals between slip events and the sizes of the associated stress drops. Applying small-amplitude oscillations to the shear force, we show, experimentally and theoretically, that the stick-slip periods synchronize. We further show that this phase-locking is related to the inhibition of slow r… ▽ More Even the most regular stick-slip frictional sliding is always stochastic, with irregularity in both the intervals between slip events and the sizes of the associated stress drops. Applying small-amplitude oscillations to the shear force, we show, experimentally and theoretically, that the stick-slip periods synchronize. We further show that this phase-locking is related to the inhibition of slow rupture modes which forces a transition to fast rupture, providing a possible mechanism for observed remote triggering of earthquakes. Such manipulation of collective modes may be generally relevant to extended nonlinear systems driven near to criticality. △ Less

Submitted 11 April, 2011; originally announced April 2011.

Comments: 4 pages, 4 figures

Cracklike Dynamics at the Onset of Frictional Sliding

Authors: Eran Bouchbinder, Efim A. Brener, Itay Barel, Michael Urbakh

Abstract: We propose an elasto-plastic inspired friction model which incorporates interfacial stiffness. Steady state sliding friction is characterized by a generic nonmonotonic behavior, including both velocity weakening and strengthening branches. In 1D and upon the application of sideway loading, we demonstrate the existence of transient cracklike fronts whose velocity is independent of sound speed, whic… ▽ More We propose an elasto-plastic inspired friction model which incorporates interfacial stiffness. Steady state sliding friction is characterized by a generic nonmonotonic behavior, including both velocity weakening and strengthening branches. In 1D and upon the application of sideway loading, we demonstrate the existence of transient cracklike fronts whose velocity is independent of sound speed, which we propose to be analogous to the recently discovered slow interfacial rupture fronts. Most importantly, the properties of these transient inhomogeneously loaded fronts are determined by steady state front solutions at the {\em minimum} of the sliding friction law, implying the existence of a new velocity scale and a "forbidden gap" of rupture velocities. We highlight the role played by interfacial stiffness and supplement our analysis with 2D scaling arguments. △ Less

Submitted 21 March, 2011; originally announced March 2011.

Comments: 4 pages, 2 figures

Journal ref: Phys. Rev. Lett. 107, 235501 (2011)

A Model of Electrowetting, Reversed Electrowetting and Contact Angle Saturation

Authors: Dan Klarman, David Andelman, Michael Urbakh

Abstract: While electrowetting has many applications, it is limited at large voltages by contact angle saturation - a phenomenon that is still not well understood. We propose a generalized approach for electrowetting that, among other results, can shed new light on contact angle saturation. The model assumes the existence of a minimum (with respect to the contact angle) in the electric energy and accounts f… ▽ More While electrowetting has many applications, it is limited at large voltages by contact angle saturation - a phenomenon that is still not well understood. We propose a generalized approach for electrowetting that, among other results, can shed new light on contact angle saturation. The model assumes the existence of a minimum (with respect to the contact angle) in the electric energy and accounts for a quadratic voltage dependence ~U^2 in the low-voltage limit, compatible with the Young-Lippmann formula, and a ~1/U^2 saturation at the high-voltage limit. Another prediction is the surprising possibility of a reversed electrowetting regime, in which the contact angle increases with applied voltage. By explicitly taking into account the effect of the counter-electrode, our model is shown to be applicable to several AC and DC experimental electrowetting-on-dielectric (EWOD) setups. Several features seen in experiments compare favorably with our results. Furthermore, the AC frequency dependence of EWOD agrees quantitatively with our predictions. Our numerical results are complemented with simple analytical expressions for the saturation angle in two practical limits. △ Less

Submitted 18 April, 2011; v1 submitted 3 February, 2011; originally announced February 2011.

Comments: 13 pages, 10 figures

Journal ref: Langmuir 27, 6031 (2011)

Manipulating single enzymes by an external harmonic force

Authors: Michael A. Lomholt, Michael Urbakh, Ralf Metzler, Joseph Klafter

Abstract: We study a Michaelis-Menten reaction for a single two-state enzyme molecule, whose transition rates between the two conformations are modulated by an harmonically oscillating external force. In particular, we obtain a range of optimal driving frequencies for changing the conformation of the enzyme thereby controlling the enzymatic activity (i.e. product formation). This analysis demonstrates tha… ▽ More We study a Michaelis-Menten reaction for a single two-state enzyme molecule, whose transition rates between the two conformations are modulated by an harmonically oscillating external force. In particular, we obtain a range of optimal driving frequencies for changing the conformation of the enzyme thereby controlling the enzymatic activity (i.e. product formation). This analysis demonstrates that it is, in principle, possible to obtain information about particular rates within the kinetic scheme. △ Less

Submitted 16 April, 2007; v1 submitted 3 November, 2006; originally announced November 2006.

Comments: 4 pages, 6 figures, minor changes, to appear in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 98, 168302 (2007)

Saltatory drift in a randomly driven two-wave potential

Authors: G. Oshanin, J. Klafter, M. Urbakh

Abstract: Dynamics of a classical particle in a one-dimensional, randomly driven potential is analysed both analytically and numerically. The potential considered here is composed of two identical spatially-periodic saw-tooth-like components, one of which is externally driven by a random force. We show that under certain conditions the particle may travel against the averaged external force performing a s… ▽ More Dynamics of a classical particle in a one-dimensional, randomly driven potential is analysed both analytically and numerically. The potential considered here is composed of two identical spatially-periodic saw-tooth-like components, one of which is externally driven by a random force. We show that under certain conditions the particle may travel against the averaged external force performing a saltatory unidirectional drift with a constant velocity. Such a behavior persists also in situations when the external force averages out to zero. We demonstrate that the physics behind this phenomenon stems from a particular behavior of fluctuations in random force: upon reaching a certain level, random fluctuations exercise a locking function creating points of irreversibility which the particle can not overpass. Repeated (randomly) in each cycle, this results in a saltatory unidirectional drift. This mechanism resembles the work of an escapement-type device in watches. Considering the overdamped limit, we propose simple analytical estimates for the particle's terminal velocity. △ Less

Submitted 17 October, 2005; originally announced October 2005.

Comments: 14 pages, 6 figures; appearing in Journal of Physics: Condensed Matter, special issue on Molecular Motors and Friction

Molecular motor with a build-in escapement device

Authors: G. Oshanin, J. Klafter, M. Urbakh

Abstract: We study dynamics of a classical particle in a one-dimensional potential, which is composed of two periodic components, that are time-independent, have equal amplitudes and periodicities. One of them is externally driven by a random force and thus performs a diffusive-type motion with respect to the other. We demonstrate that here, under certain conditions, the particle may move unidirectionally… ▽ More We study dynamics of a classical particle in a one-dimensional potential, which is composed of two periodic components, that are time-independent, have equal amplitudes and periodicities. One of them is externally driven by a random force and thus performs a diffusive-type motion with respect to the other. We demonstrate that here, under certain conditions, the particle may move unidirectionally with a constant velocity, despite the fact that the random force averages out to zero. We show that the physical mechanism underlying such a phenomenon resembles the work of an escapement-type device in watches; upon reaching certain level, random fluctuations exercise a locking function creating the points of irreversibility in particle's trajectories such that the particle gets uncompensated displacements. Repeated (randomly) in each cycle, this process ultimately results in a random ballistic-type motion. In the overdamped limit, we work out simple analytical estimates for the particle's terminal velocity. Our analytical results are in a very good agreement with the Monte Carlo data. △ Less

Submitted 18 December, 2003; originally announced December 2003.

Comments: 7 pages, 4 figures

From deterministic dynamics to kinetic phenomena

Authors: S. Denisov, A. Filippov, J. Klafter, M. Urbakh

Abstract: We investigate a one-dimenisonal Hamiltonian system that describes a system of particles interacting through short-range repulsive potentials. Depending on the particle mean energy, $ε$, the system demonstrates a spectrum of kinetic regimes, characterized by their transport properties ranging from ballistic motion to localized oscillations through anomalous diffusion regimes. We etsablish relati… ▽ More We investigate a one-dimenisonal Hamiltonian system that describes a system of particles interacting through short-range repulsive potentials. Depending on the particle mean energy, $ε$, the system demonstrates a spectrum of kinetic regimes, characterized by their transport properties ranging from ballistic motion to localized oscillations through anomalous diffusion regimes. We etsablish relationships between the observed kinetic regimes and the "thermodynamic" states of the system. The nature of heat conduction in the proposed model is discussed. △ Less

Submitted 7 August, 2003; originally announced August 2003.

Comments: 4 pages, 4 figures

Manipulations of individual molecules by scanning probe microscopy

Authors: O. Dudko, A. E. Filippov, J. Klafter, M. Urbakh

Abstract: In this Letter we suggest a new method of manipulating individual molecules with scanning probes using a "pick-up-and put-down" mode. We demonstrate that the number of molecules picked up by the tip and deposited in a different location can be controlled by adjusting the pulling velocity of the tip and the distance of closest approach of the tip to the surface. In this Letter we suggest a new method of manipulating individual molecules with scanning probes using a "pick-up-and put-down" mode. We demonstrate that the number of molecules picked up by the tip and deposited in a different location can be controlled by adjusting the pulling velocity of the tip and the distance of closest approach of the tip to the surface. △ Less

Submitted 8 July, 2003; originally announced July 2003.

Journal ref: Nano Lettrs, Vo.3 no.6, 795-798, 2003

A New Look at Dynamic Force Spectroscopy of Adhesion Bonds

Authors: O. K. Dudko, A. E. Filippov, J. Klafter, M. Urbakh

Abstract: Dynamic force spectroscopy of single molecules is described by a model which predicts a distribution of rupture forces, the corresponding mean rupture force and variance, all amenable to experimental tests. The distribution has a pronounced asymmetry which has recently been observed experimentally. The mean rupture force follows a lnV to the power of 2/3 dependence on the pulling velocity V and… ▽ More Dynamic force spectroscopy of single molecules is described by a model which predicts a distribution of rupture forces, the corresponding mean rupture force and variance, all amenable to experimental tests. The distribution has a pronounced asymmetry which has recently been observed experimentally. The mean rupture force follows a lnV to the power of 2/3 dependence on the pulling velocity V and differs from earlier predictions.Interestingly, at low pulling velocities a rebinding process is obtained whose signature is an intermittent behavior of the spring force which delays the rupture. An extension to include conformational changes of the adhesion complex is proposed which leads to the possibility of bimodal distributions of rupture forces. △ Less

Submitted 10 July, 2003; v1 submitted 8 July, 2003; originally announced July 2003.

Comments: 11 text pages, 3 figures, PNAS in press

Directed molecular transport in an oscillating symmetric channel

Authors: D. Lichtenberg, A. E. Filippov, M. Urbakh

Abstract: A mechanism responsible for the directed transport and molecular separation in a symmetric channel is proposed. We found that under the action of spatial harmonic oscillations of the channel, the system exhibits a directed transport in either direction, presenting multiple current reversals as the amplitude and/or frequency of the oscillations are varied. The particles of different masses may be… ▽ More A mechanism responsible for the directed transport and molecular separation in a symmetric channel is proposed. We found that under the action of spatial harmonic oscillations of the channel, the system exhibits a directed transport in either direction, presenting multiple current reversals as the amplitude and/or frequency of the oscillations are varied. The particles of different masses may be forced to move with different velocities in the same or in the opposite directions by properly adjusting driving parameters. The directed transport can be produced in both directions even in the absence of thermal noise, the latter can speed up or slow down the transport depending on the system parameters. △ Less

Submitted 8 July, 2003; originally announced July 2003.

Dynamical heat channels

Authors: S. Denisov, J. Klafter, M. Urbakh

Abstract: We consider heat conduction in a 1D dynamical channel. The channel consists of a group of noninteracting particles, which move between two heat baths according to some dynamical process. We show that the essential thermodynamic properties of the heat channel can be evaluated from the diffusion properties of the underlying particles. Emphasis is put on the conduction under anomalous diffusion con… ▽ More We consider heat conduction in a 1D dynamical channel. The channel consists of a group of noninteracting particles, which move between two heat baths according to some dynamical process. We show that the essential thermodynamic properties of the heat channel can be evaluated from the diffusion properties of the underlying particles. Emphasis is put on the conduction under anomalous diffusion conditions. \\{\bf PACS number}: 05.40.+j, 05.45.ac, 05.60.cd △ Less

Submitted 15 June, 2003; originally announced June 2003.

Comments: 4 figures

Atomic scale engines: Cars and wheels

Authors: Markus Porto, Michael Urbakh, Joseph Klafter

Abstract: We introduce a new approach to build microscopic engines on the atomic scale that move translationally or rotationally and can perform useful functions such as pulling of a cargo. Characteristic of these engines is the possibility to determine dynamically the directionality of the motion. The approach is based on the transformation of the fed energy to directed motion through a dynamical competi… ▽ More We introduce a new approach to build microscopic engines on the atomic scale that move translationally or rotationally and can perform useful functions such as pulling of a cargo. Characteristic of these engines is the possibility to determine dynamically the directionality of the motion. The approach is based on the transformation of the fed energy to directed motion through a dynamical competition between the intrinsic lengths of the moving object and the supporting carrier. △ Less

Submitted 4 June, 2000; originally announced June 2000.

Comments: 4 pages, 3 figures (2 in color), Phys. Rev. Lett. (in print)

Journal ref: Phys. Rev. Lett. 84, 6058 (2000)

Molecular motor that never steps backwards

Authors: Markus Porto, Michael Urbakh, Joseph Klafter

Abstract: We investigate the dynamics of a classical particle in a one-dimensional two-wave potential composed of two periodic potentials, that are time-independent and of the same amplitude and periodicity. One of the periodic potentials is externally driven and performs a translational motion with respect to the other. It is shown that if one of the potentials is of the ratchet type, translation of the… ▽ More We investigate the dynamics of a classical particle in a one-dimensional two-wave potential composed of two periodic potentials, that are time-independent and of the same amplitude and periodicity. One of the periodic potentials is externally driven and performs a translational motion with respect to the other. It is shown that if one of the potentials is of the ratchet type, translation of the potential in a given direction leads to motion of the particle in the same direction, whereas translation in the opposite direction leaves the particle localized at its original location. Moreover, even if the translation is random, but still has a finite velocity, an efficient directed transport of the particle occurs. △ Less

Submitted 4 June, 2000; originally announced June 2000.

Comments: 4 pages, 5 figures, Phys. Rev. Lett. (in print)

Journal ref: Phys. Rev. Lett. 85, 491 (2000)

Looking at friction through "shearons"

Authors: Markus Porto, Michael Urbakh, Joseph Klafter

Abstract: We study the response to shear of a one-dimensional monolayer embedded between two rigid plates, where the upper one is externally driven. The shear is shown to excite ``shearons'', which are collective modes of the embedded system with well defined spatial and temporal pattern, and which dominate the frictional properties of the driven system. We demonstrate that static friction, stick-slip eve… ▽ More We study the response to shear of a one-dimensional monolayer embedded between two rigid plates, where the upper one is externally driven. The shear is shown to excite ``shearons'', which are collective modes of the embedded system with well defined spatial and temporal pattern, and which dominate the frictional properties of the driven system. We demonstrate that static friction, stick-slip events, and memory effects are well described in terms of the creation and/or annihilation of a shearon. This raises the possibility to control friction by modifying the excited shearon, which we examplify by introducing a defect at the bottom plate. △ Less

Submitted 3 August, 1999; originally announced August 1999.

Comments: 6 pages, 3 figures, submitted