-
Inkjet printed circuits with two-dimensional semiconductor inks for high-performance electronics
Authors:
Tian Carey,
Adrees Arbab,
Luca Anzi,
Helen Bristow,
Fei Hui,
Sivasambu Bohm,
Gwenhivir Wyatt-Moon,
Andrew Flewitt,
Andrew Wadsworth,
Nicola Gasparini,
Jong Min Kim,
Mario Lanza,
Iain McCulloch,
Roman Sordan,
Felice Torrisi
Abstract:
Air-stable semiconducting inks suitable for complementary logic are key to create low-power printed integrated circuits (ICs). High-performance printable electronic inks with two-dimensional materials have the potential to enable the next generation of high performance, low-cost printed digital electronics. Here we demonstrate air-stable, low voltage (< 5 V) operation of inkjet-printed n-type moly…
▽ More
Air-stable semiconducting inks suitable for complementary logic are key to create low-power printed integrated circuits (ICs). High-performance printable electronic inks with two-dimensional materials have the potential to enable the next generation of high performance, low-cost printed digital electronics. Here we demonstrate air-stable, low voltage (< 5 V) operation of inkjet-printed n-type molybdenum disulfide (MoS2) and p-type indacenodithiophene-co-benzothiadiazole (IDT-BT) field-effect transistors (FETs), estimating a switching time of τ ~ 3.3 μs for the MoS2 FETs. We achieve this by engineering high-quality MoS2 and air-stable IDT-BT inks suitable for inkjet-printing complementary pairs of n-type MoS2 and p-type IDT-BT FETs. We then integrate MoS2 and IDT-BT FETs to realise inkjet-printed complementary logic inverters with a voltage gain |Av| ~ 4 when in resistive load configuration and |Av| ~ 1.36 in complementary configuration. These results represent a key enabling step towards ubiquitous long-term stable, low-cost printed digital ICs.
△ Less
Submitted 24 November, 2020;
originally announced November 2020.
-
Terahertz frequency combs exploiting an on-chip solution processed graphene-quantum cascade laser coupled-cavity architecture
Authors:
F. P. Mezzapesa,
K. Garrasi,
J. Schmidt,
L. Salemi,
V. Pistore,
L. Li,
A. G. Davies,
E. H. Linfield,
M. Riesch,
C. Jirauschek,
T. Carey,
F. Torrisi,
A. C. Ferrari,
M. S. Vitiello
Abstract:
The ability to engineer quantum-cascade-lasers (QCLs) with ultrabroad gain spectra and with a full compensation of the group velocity dispersion, at Terahertz (THz) frequencies, is a fundamental need for devising monolithic and miniaturized optical frequency-comb-synthesizers (FCS) in the far-infrared. In a THz QCL four-wave mixing, driven by the intrinsic third-order susceptibility of the intersu…
▽ More
The ability to engineer quantum-cascade-lasers (QCLs) with ultrabroad gain spectra and with a full compensation of the group velocity dispersion, at Terahertz (THz) frequencies, is a fundamental need for devising monolithic and miniaturized optical frequency-comb-synthesizers (FCS) in the far-infrared. In a THz QCL four-wave mixing, driven by the intrinsic third-order susceptibility of the intersubband gain medium, self-lock the optical modes in phase, allowing stable comb operation, albeit over a restricted dynamic range (~ 20% of the laser operational range). Here, we engineer miniaturized THz FCSs comprising a heterogeneous THz QCL integrated with a tightly-coupled on-chip solution-processed graphene saturable-absorber reflector that preserves phase-coherence between lasing modes even when four-wave mixing no longer provides dispersion compensation. This enables a high-power (8 mW) FCS with over 90 optical modes to be demonstrated, over more than 55% of the laser operational range. Furthermore, stable injection-locking is showed, paving the way to impact a number of key applications, including high-precision tuneable broadband-spectroscopy and quantum-metrology.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
-
Microfluidization of graphite and formulation of graphene-based conductive inks
Authors:
P. G. Karagiannidis,
S. A. Hodge,
L. Lombardi,
F. Tomarchio,
N. Decorde,
S. Milana,
I. Goykhman,
Y. Su,
S. V. Mesite,
D. N. Johnstone,
R. K. Leary,
P. A. Midgley,
N. M. Pugno,
F. Torrisi,
A. C. Ferrari
Abstract:
We report the exfoliation of graphite in aqueous solutions under high shear rate [$\sim10^8s^{-1}$] turbulent flow conditions, with a 100\% exfoliation yield. The material is stabilized without centrifugation at concentrations up to 100 g/L using carboxymethylcellulose sodium salt to formulate conductive printable inks. The sheet resistance of blade coated films is below$\sim2Ω/\square$. This is a…
▽ More
We report the exfoliation of graphite in aqueous solutions under high shear rate [$\sim10^8s^{-1}$] turbulent flow conditions, with a 100\% exfoliation yield. The material is stabilized without centrifugation at concentrations up to 100 g/L using carboxymethylcellulose sodium salt to formulate conductive printable inks. The sheet resistance of blade coated films is below$\sim2Ω/\square$. This is a simple and scalable production route for graphene-based conductive inks for large area printing in flexible electronics.
△ Less
Submitted 10 November, 2016;
originally announced November 2016.
-
Few-cycle pulses from a graphene mode-locked all-fiber laser
Authors:
D. Purdie,
D. Popa,
V. J. Wittwer,
Z. Jiang,
G. Bonacchini,
F. Torrisi,
S. Milana,
E. Lidorikis,
A. C. Ferrari
Abstract:
We combine a graphene mode-locked oscillator with an external compressor and achieve~29fs pulses with~52mW average power. This is a simple, low-cost, and robust setup, entirely fiber based, with no free-space optics, for applications requiring high temporal resolution.
We combine a graphene mode-locked oscillator with an external compressor and achieve~29fs pulses with~52mW average power. This is a simple, low-cost, and robust setup, entirely fiber based, with no free-space optics, for applications requiring high temporal resolution.
△ Less
Submitted 7 April, 2015;
originally announced April 2015.
-
Wideband saturable absorption in few-layer molybdenum diselenide (MoSe2) for Q-switching Yb-, Er- and Tm-doped fiber lasers
Authors:
R. I. Woodward,
R. C. T. Howe,
T. H. Runcorn,
G. Hu,
F. Torrisi,
E. J. R. Kelleher,
T. Hasan
Abstract:
We fabricate a free-standing molybdenum diselenide (MoSe2) saturable absorber by embedding liquid-phase exfoliated few-layer MoSe2 flakes into a polymer film. The MoSe2-polymer composite is used to Q-switch fiber lasers based on ytterbium (Yb), erbium (Er) and thulium (Tm) gain fiber, producing trains of microsecond-duration pulses with kilohertz repetition rates at 1060 nm, 1566 nm and 1924 nm, r…
▽ More
We fabricate a free-standing molybdenum diselenide (MoSe2) saturable absorber by embedding liquid-phase exfoliated few-layer MoSe2 flakes into a polymer film. The MoSe2-polymer composite is used to Q-switch fiber lasers based on ytterbium (Yb), erbium (Er) and thulium (Tm) gain fiber, producing trains of microsecond-duration pulses with kilohertz repetition rates at 1060 nm, 1566 nm and 1924 nm, respectively. Such operating wavelengths correspond to sub-bandgap saturable absorption in MoSe2, which is explained in the context of edge-states, building upon studies of other semiconducting transition metal dichalcogenide (TMD)-based saturable absorbers. Our work adds few-layer MoSe2 to the growing catalog of TMDs with remarkable optical properties, which offer new opportunities for photonic devices.
△ Less
Submitted 12 June, 2015; v1 submitted 27 March, 2015;
originally announced March 2015.
-
1.5 GHz Pulse Generation From a Monolithic Waveguide Laser With a Graphene-Film Saturable Output Coupler
Authors:
R. Mary,
S. J. Beecher,
G. Brown,
F. Torrisi,
S. Milana,
D. Popa,
T. Hasan,
Z. Sun,
E. Lidorikis,
S. Ohara,
A. C. Ferrari,
A. K. Kar
Abstract:
We fabricate a saturable absorber mirror by coating a graphene film on an output coupler mirror. This is then used to obtain Q-switched mode-locking from a diode pumped linear cavity waveguide laser inscribed in Ytterbium-doped Bismuthate Glass, with high slope and optical conversion efficiencies. The laser produces mode-locked pulses at 1039nm, with 1.5GHz repetition rate at an average 202mW outp…
▽ More
We fabricate a saturable absorber mirror by coating a graphene film on an output coupler mirror. This is then used to obtain Q-switched mode-locking from a diode pumped linear cavity waveguide laser inscribed in Ytterbium-doped Bismuthate Glass, with high slope and optical conversion efficiencies. The laser produces mode-locked pulses at 1039nm, with 1.5GHz repetition rate at an average 202mW output power. This performance is due to the combination of the graphene saturable absorber with the high quality laser glass.
△ Less
Submitted 14 December, 2012;
originally announced December 2012.
-
2μm Solid-State Laser Mode-locked By Single-Layer Graphene
Authors:
A. A. Lagatsky,
Z. Sun,
T. S. Kulmala,
R. S. Sundaram,
S. Milana,
F. Torrisi,
O. L. Antipov,
Y. Lee,
J. H. Ahn,
C. T. A. Brown,
W. Sibbett,
A. C. Ferrari
Abstract:
We report a 2μm ultrafast solid-state Tm:Lu2O3 laser, mode-locked by single-layer graphene, generating transform-limited~410fs pulses, with a spectral width~11.1nm at 2067nm. The maximum average output power is 270mW, at a pulse repetition frequency of 110MHz. This is a convenient high-power transform-limited laser at 2μm for various applications, such as laser surgery and material processing.
We report a 2μm ultrafast solid-state Tm:Lu2O3 laser, mode-locked by single-layer graphene, generating transform-limited~410fs pulses, with a spectral width~11.1nm at 2067nm. The maximum average output power is 270mW, at a pulse repetition frequency of 110MHz. This is a convenient high-power transform-limited laser at 2μm for various applications, such as laser surgery and material processing.
△ Less
Submitted 25 October, 2012;
originally announced October 2012.
-
Tm-doped fiber laser mode-locked by graphene-polymer composite
Authors:
M. Zhang,
E. J. R. Kelleher,
F. Torrisi,
Z. Sun,
T. Hasan,
D. Popa,
F. Wang,
A. C. Ferrari,
S. V. Popov,
J. R. Taylor
Abstract:
We demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94μm, using a graphene-based saturable absorber. The laser outputs 3.6ps pulses, with~0.4nJ energy and an amplitude fluctuation~0.5%, at 6.46MHz. This is a simple, low-cost, stable and convenient laser oscillator for applications where eye-safe and low-photon-energy light sources are required, such as sensing and biomedical…
▽ More
We demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94μm, using a graphene-based saturable absorber. The laser outputs 3.6ps pulses, with~0.4nJ energy and an amplitude fluctuation~0.5%, at 6.46MHz. This is a simple, low-cost, stable and convenient laser oscillator for applications where eye-safe and low-photon-energy light sources are required, such as sensing and biomedical diagnostics
△ Less
Submitted 8 August, 2012;
originally announced August 2012.
-
Ink-Jet Printed Graphene Electronics
Authors:
F. Torrisi,
T. Hasan,
W. Wu,
Z. Sun,
A. Lombardo,
T. Kulmala,
G. W. Hshieh,
S. J. Jung,
F. Bonaccorso,
P. J. Paul,
D. P. Chu,
A. C. Ferrari
Abstract:
We demonstrate ink-jet printing as a viable method for large area fabrication of graphene devices. We produce a graphene-based ink by liquid phase exfoliation of graphite in N-Methylpyrrolidone. We use it to print thin-film transistors, with mobilities up to~95cm^2V^(-1)s(-1), as well as transparent and conductive patterns, with~80 % transmittance and~30kOhm/sq sheet resistance. This paves the way…
▽ More
We demonstrate ink-jet printing as a viable method for large area fabrication of graphene devices. We produce a graphene-based ink by liquid phase exfoliation of graphite in N-Methylpyrrolidone. We use it to print thin-film transistors, with mobilities up to~95cm^2V^(-1)s(-1), as well as transparent and conductive patterns, with~80 % transmittance and~30kOhm/sq sheet resistance. This paves the way to all-printed, flexible and transparent graphene devices on arbitrary substrates
△ Less
Submitted 21 November, 2011;
originally announced November 2011.
-
Graphene Q-switched, tunable fiber laser
Authors:
D. Popa,
Z. Sun,
T. Hasan,
F. Torrisi,
F. Wang,
A. C. Ferrari
Abstract:
We demonstrate a wideband-tunable Q-switched fiber laser exploiting a graphene saturable absorber. We get ~2us pulses, tunable between 1522 and 1555nm with up to~40nJ energy. This is a simple and low-cost light source for metrology, environmental sensing and biomedical diagnostics.
We demonstrate a wideband-tunable Q-switched fiber laser exploiting a graphene saturable absorber. We get ~2us pulses, tunable between 1522 and 1555nm with up to~40nJ energy. This is a simple and low-cost light source for metrology, environmental sensing and biomedical diagnostics.
△ Less
Submitted 30 October, 2010;
originally announced November 2010.
-
Sub 200fs pulse generation from a graphene mode-locked fiber laser
Authors:
D. Popa,
Z. Sun,
F. Torrisi,
T. Hasan,
F. Wang,
A. C. Ferrari
Abstract:
Ultrafast fiber lasers with short pulses and broad bandwidth are in great demand for a variety of applications, such as spectroscopy, biomedical diagnosis and optical communications. In particular sub-200fs pulses are required for ultrafast spectroscopy with high temporal resolution. Graphene is an ideal ultra-wide-band saturable absorber. We report the generation of 174fs pulses from a graphene-b…
▽ More
Ultrafast fiber lasers with short pulses and broad bandwidth are in great demand for a variety of applications, such as spectroscopy, biomedical diagnosis and optical communications. In particular sub-200fs pulses are required for ultrafast spectroscopy with high temporal resolution. Graphene is an ideal ultra-wide-band saturable absorber. We report the generation of 174fs pulses from a graphene-based fiber laser
△ Less
Submitted 7 October, 2010;
originally announced October 2010.
-
Wideband tunable, graphene-mode locked, ultrafast laser
Authors:
Z. Sun,
D. Popa,
T. Hasan,
F. Torrisi,
F. Wang,
E. J. R. Kelleher,
J. C. Travers,
A. C. Ferrari
Abstract:
We report a tunable ultrafast fiber laser mode-locked with a graphene saturable absorber. The linear dispersions of the Dirac electrons in graphene enable wideband tunability. We get ~1ps pulses, tunable between 1525 and 1559nm, demonstrating graphene as a broadband saturable absorber.
We report a tunable ultrafast fiber laser mode-locked with a graphene saturable absorber. The linear dispersions of the Dirac electrons in graphene enable wideband tunability. We get ~1ps pulses, tunable between 1525 and 1559nm, demonstrating graphene as a broadband saturable absorber.
△ Less
Submitted 24 March, 2010;
originally announced March 2010.
-
Graphene Mode-Locked Ultrafast Laser
Authors:
Z. Sun,
T. Hasan,
F. Torrisi,
D. Popa,
G. Privitera,
F. Wang,
F. Bonaccorso,
D. M. Basko,
A. C. Ferrari
Abstract:
Graphene is at the center of a significant research effort. Near-ballistic transport at room temperature and high mobility make it a potential material for nanoelectronics. Its electronic and mechanical properties are also ideal for micro and nanomechanical systems, thin-film transistors and transparent and conductive composites and electrodes. Here we exploit the optoelectronic properties of gr…
▽ More
Graphene is at the center of a significant research effort. Near-ballistic transport at room temperature and high mobility make it a potential material for nanoelectronics. Its electronic and mechanical properties are also ideal for micro and nanomechanical systems, thin-film transistors and transparent and conductive composites and electrodes. Here we exploit the optoelectronic properties of graphene to realize an ultrafast laser. A graphene-polymer composite is fabricated using wet-chemistry techniques. Pauli blocking following intense illumination results in saturable absorption, independent of wavelength. This is used to passively mode-lock an Erbium-doped fibre laser working at 1559nm, with a 5.24nm spectral bandwidth and ~460fs pulse duration, paving the way to graphene-based photonics.
△ Less
Submitted 2 September, 2009;
originally announced September 2009.
