-
Massive MIMO with 1-Bit DACs: Data Detection for Quantized Linear Precoding with Dithering
Authors:
Amin Radbord,
Italo Atzeni,
Antti Tölli
Abstract:
To leverage high-frequency bands in 6G wireless systems and beyond, employing massive multiple-input multipleoutput (MIMO) arrays at the transmitter and/or receiver side is crucial. To mitigate the power consumption and hardware complexity across massive frequency bands and antenna arrays, a sacrifice in the resolution of the data converters will be inevitable. In this paper, we consider a point-t…
▽ More
To leverage high-frequency bands in 6G wireless systems and beyond, employing massive multiple-input multipleoutput (MIMO) arrays at the transmitter and/or receiver side is crucial. To mitigate the power consumption and hardware complexity across massive frequency bands and antenna arrays, a sacrifice in the resolution of the data converters will be inevitable. In this paper, we consider a point-to-point massive MIMO system with 1-bit digital-to-analog converters at the transmitter, where the linearly precoded signal is supplemented with dithering before the 1-bit quantization. For this system, we propose a new maximumlikelihood (ML) data detection method at the receiver by deriving the mean and covariance matrix of the received signal, where symbol-dependent linear minimum mean squared error estimation is utilized to efficiently linearize the transmitted signal. Numerical results show that the proposed ML method can provide gains of more than two orders of magnitude in terms of symbol error rate over conventional data detection based on soft estimation.
△ Less
Submitted 5 June, 2025;
originally announced June 2025.
-
Coordinated Multi-BS SSB Beam Design for Enhanced Initial Access Coverage
Authors:
Hakime BarghiZanjani,
Bikshapathi Gouda,
Antti Tölli
Abstract:
Ensuring strong synchronization signal block (SSB) coverage is essential for reliable user equipment (UE) connection during initial access. While techniques such as power boosting and network densification are commonly used, this work explores joint transmission (JT) of SSBs as an alternative to enhance coverage. Although JT is widely applied in data transmission, its use for SSBs has not been exp…
▽ More
Ensuring strong synchronization signal block (SSB) coverage is essential for reliable user equipment (UE) connection during initial access. While techniques such as power boosting and network densification are commonly used, this work explores joint transmission (JT) of SSBs as an alternative to enhance coverage. Although JT is widely applied in data transmission, its use for SSBs has not been explored due to the lack of channel state information, which prevents coherent signal alignment across base stations (BSs). To address this, we propose a repetition-based JT strategy using a small set of predefined phase configurations at the BSs. This enables the UE to coherently combine multiple SSB receptions and achieve constructive gain regardless of its location. To reduce overhead, a limited number of joint beam configurations is selected to maximize the coverage. Simulation results under the line-of-sight conditions show up to 6 dB relative SNR gain with JT of SSBs using 4 BSs, compared to independent SSB transmission under the same resource budget. These results highlight the potential of JT to improve the coverage of SSBs during the initial access.
△ Less
Submitted 3 June, 2025;
originally announced June 2025.
-
Near-Field MIMO Channel Acquisition: Geometry-Aided Feedback and Transmission Design
Authors:
Shima Eslami,
Bikshapathi Gouda,
Antti Tölli
Abstract:
Near-field (NF) line-of-sight (LoS) MIMO systems enable efficient channel state information (CSI) acquisition and precoding by exploiting known antenna geometries at both the base station (BS) and user equipment (UE). This paper introduces a compact parameterization of the NF LoS MIMO channel using two angles of departure (AoDs) and a BS-UE relative rotation angle. The inclusion of the second AoD…
▽ More
Near-field (NF) line-of-sight (LoS) MIMO systems enable efficient channel state information (CSI) acquisition and precoding by exploiting known antenna geometries at both the base station (BS) and user equipment (UE). This paper introduces a compact parameterization of the NF LoS MIMO channel using two angles of departure (AoDs) and a BS-UE relative rotation angle. The inclusion of the second AoD removes the need for fine-grained distance grids imposed by conventional NF channel parametrization. To address the user-specific uplink pilot overhead in multiuser NF CSI acquisition, we propose a scheme that uses a fixed, UE-independent set of downlink pilots transmitted from a carefully selected subset of BS antennas. In dominant LoS conditions, as few as four pilots suffice, with Cramér-Rao bound (CRB) analysis confirming that increased antenna spacing improves estimation accuracy. Each UE estimates and quantizes its angular parameters and feeds them back to the BS for geometry-based CSI reconstruction, eliminating the need for full channel feedback. To enhance robustness against noise, quantization errors, and non-line-of-sight (NLoS) components, we introduce a two-stage precoding method. The initial precoding is computed from estimated LoS CSI and refined through bidirectional over-the-air (OTA) training. Furthermore, a two-step stream allocation strategy reduces pilot and computational overhead. Simulations demonstrate that the proposed approach achieves high data rates with significantly fewer OTA iterations, approaching the performance of perfect CSI.
△ Less
Submitted 7 May, 2025;
originally announced May 2025.
-
Data-Aided Regularization of Direct-Estimate Combiner in Distributed MIMO Systems
Authors:
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
This paper explores the data-aided regularization of the direct-estimate combiner in the uplink of a distributed multiple-input multiple-output system. The network-wide combiner can be computed directly from the pilot signal received at each access point, eliminating the need for explicit channel estimation. However, the sample covariance matrix of the received pilot signal that is used in its com…
▽ More
This paper explores the data-aided regularization of the direct-estimate combiner in the uplink of a distributed multiple-input multiple-output system. The network-wide combiner can be computed directly from the pilot signal received at each access point, eliminating the need for explicit channel estimation. However, the sample covariance matrix of the received pilot signal that is used in its computation may significantly deviate from the actual covariance matrix when the number of pilot symbols is limited. To address this, we apply a regularization to the sample covariance matrix using a shrinkage coefficient based on the received data signal. Initially, the shrinkage coefficient is determined by minimizing the difference between the sample covariance matrices obtained from the received pilot and data signals. Given the limitations of this approach in interference-limited scenarios, the shrinkage coefficient is iteratively optimized using the sample mean squared error of the hard-decision symbols, which is more closely related to the actual system's performance, e.g., the symbol error rate (SER). Numerical results demonstrate that the proposed regularization of the direct-estimate combiner significantly enhances the SER, particularly when the number of pilot symbols is limited.
△ Less
Submitted 21 January, 2025;
originally announced January 2025.
-
SIC-free Multicast Scheduling for Multi-antenna Coded Caching
Authors:
MohammadJavad Sojdeh,
MohammadJavad Salehi,
Antti Tölli
Abstract:
Multi-antenna coded caching (CC) with multicast beamforming typically relies on a complex successive interference cancellation (SIC) structure to decode a superposition of multiple streams received by each user. Signal-level CC schemes require the regeneration and cancellation of interfering signals at the physical layer of each receiver, which complicates practical implementations. To address thi…
▽ More
Multi-antenna coded caching (CC) with multicast beamforming typically relies on a complex successive interference cancellation (SIC) structure to decode a superposition of multiple streams received by each user. Signal-level CC schemes require the regeneration and cancellation of interfering signals at the physical layer of each receiver, which complicates practical implementations. To address this, we propose a bit-level multicast scheduling scheme enabling linear, SIC-free decoding of parallel streams by repeatedly transmitting data terms with linearly independent coefficients. Two reference strategies and a novel sparse strategy are considered for constructing the coefficient matrix. The reference cases include the random strategy, which lacks control over matrix construction, and the equal-distant strategy, which balances users' interference and data terms equally. In contrast, the sparse strategy minimizes the number of multicast streams transmitted in parallel during each interval. This approach simplifies both the decoding process and the beamforming design by decoupling the desired data terms for each user and reducing the number of SINR constraints, respectively. To further enhance the symmetric rate, a successive projection algorithm is applied to exploit channel properties and optimize user ordering. With the coefficient matrix and optimized user ordering in place, multicast beamformers are devised to aggregate desired data from relevant multicast streams. Numerical simulations validate the effectiveness of the sparse strategy and user scheduling, demonstrating significant gains in symmetric rate.
△ Less
Submitted 27 January, 2025; v1 submitted 19 January, 2025;
originally announced January 2025.
-
Achievable DoF Bounds for Cache-Aided Asymmetric MIMO Communications
Authors:
Mohammad NaseriTehrani,
MohammadJavad Salehi,
Antti Tölli
Abstract:
Integrating coded caching (CC) into multiple-input multiple-output (MIMO) communications can significantly enhance the achievable degrees of freedom (DoF) in wireless networks. This paper investigates a practical cache-aided asymmetric MIMO configuration with cache ratio $γ$, where a server equipped with $L$ transmit antennas communicates with $K$ users, each having $G_k$ receive antennas. We prop…
▽ More
Integrating coded caching (CC) into multiple-input multiple-output (MIMO) communications can significantly enhance the achievable degrees of freedom (DoF) in wireless networks. This paper investigates a practical cache-aided asymmetric MIMO configuration with cache ratio $γ$, where a server equipped with $L$ transmit antennas communicates with $K$ users, each having $G_k$ receive antennas. We propose three content-aware MIMO-CC strategies: the \emph{min-G} scheme, which treats the system as symmetric by assuming all users have the same number of antennas, equal to the smallest among them; the \emph{Grouping} scheme, which maximizes spatial multiplexing gain separately within each user subset at the cost of some global caching gain; and the \emph{Phantom} scheme, which dynamically redistributes spatial resources using virtual or ``phantom'' antennas at the users, bridging the performance gains of the min-$G$ and Grouping schemes. These strategies jointly optimize the number of users, $Ω$, and the parallel streams decoded by each user, $β_k$, ensuring linear decodability for all target users. Analytical and numerical results confirm that the proposed schemes achieve significant DoF improvements across various system configurations.
△ Less
Submitted 28 January, 2025; v1 submitted 18 January, 2025;
originally announced January 2025.
-
MIMO Detection with Spatial Sigma-Delta ADCs: A Variational Bayesian Approach
Authors:
Toan-Van Nguyen,
Sajjad Nassirpour,
Italo Atzeni,
Antti Tolli,
A. Lee Swindlehurst,
Duy H. N. Nguyen
Abstract:
The spatial Sigma-Delta ($ΣΔ$) architecture can be leveraged to reduce the quantization noise and enhance the effective resolution of few-bit analog-to-digital converters (ADCs) at certain spatial frequencies of interest. Utilizing the variational Bayesian (VB) inference framework, this paper develops novel data detection algorithms tailored for massive multiple-input multiple-output (MIMO) system…
▽ More
The spatial Sigma-Delta ($ΣΔ$) architecture can be leveraged to reduce the quantization noise and enhance the effective resolution of few-bit analog-to-digital converters (ADCs) at certain spatial frequencies of interest. Utilizing the variational Bayesian (VB) inference framework, this paper develops novel data detection algorithms tailored for massive multiple-input multiple-output (MIMO) systems with few-bit $ΣΔ$ ADCs and angular channel models, where uplink signals are confined to a specific angular sector. We start by modeling the corresponding Bayesian networks for the $1^{\mathrm{st}}$- and $2^{\mathrm{nd}}$-order $ΣΔ$ receivers. Next, we propose an iterative algorithm, referred to as Sigma-Delta variational Bayes (SD-VB), for MIMO detection, offering low-complexity updates through closed-form expressions of the variational densities of the latent variables. Simulation results show that the proposed $2^{\mathrm{nd}}$-order SD-VB algorithm delivers the best symbol error rate (SER) performance while maintaining the same computational complexity as in unquantized systems, matched-filtering VB with conventional quantization, and linear minimum mean-squared error (LMMSE) methods. Moreover, the $1^{\mathrm{st}}$- and $2^{\mathrm{nd}}$-order SD-VB algorithms achieve their lowest SER at an antenna separation of one-fourth wavelength for a fixed number of antenna elements. The effects of the steering angle of the $ΣΔ$ architecture, the number of ADC resolution bits, and the number of antennas and users are also extensively analyzed.
△ Less
Submitted 4 October, 2024;
originally announced October 2024.
-
Cache-Aided MIMO Communications: DoF Analysis and Transmitter Optimization
Authors:
Mohammad NaseriTehrani,
MohammadJavad Salehi,
Antti Tölli
Abstract:
Cache-aided MIMO communications aims to jointly exploit both coded caching~(CC) and spatial multiplexing gains to enhance communication efficiency. In this paper, we first analyze the achievable degrees of freedom~(DoF) in a MIMO-CC system with CC gain \(t\), where a server with \(L\) transmit antennas communicates with \(K\) users, each equipped with \(G\) receive antennas. We demonstrate that th…
▽ More
Cache-aided MIMO communications aims to jointly exploit both coded caching~(CC) and spatial multiplexing gains to enhance communication efficiency. In this paper, we first analyze the achievable degrees of freedom~(DoF) in a MIMO-CC system with CC gain \(t\), where a server with \(L\) transmit antennas communicates with \(K\) users, each equipped with \(G\) receive antennas. We demonstrate that the enhanced achievable DoF is \(\max_{β, Ω} Ωβ\), where the number of users \(Ω\) served in each transmission is fine-tuned to maximize DoF, and \(β\le \min\big(G, \nicefrac{L \binom{Ω-1}{t}}{1 + (Ω- t - 1)\binom{Ω-1}{t}}\big)\) represents the number of parallel streams decoded by each user. Second, we introduce an effective transmit covariance matrix design aimed at maximizing the symmetric rate, solved iteratively via successive convex approximation. Third, we propose a new class of MIMO-CC schemes using a novel scheduling mechanism leveraging maximal multicasting opportunities to maximize delivery rates at given SNR levels while adhering to linear processing constraints. Lastly, we devise linear multicast beamforming strategies tailored for the flexible scheduling schemes in MIMO-CC systems and present an iterative solution for the efficient design of beamformers. Extensive numerical simulations are used to verify the results of the paper.
△ Less
Submitted 13 August, 2024; v1 submitted 22 July, 2024;
originally announced July 2024.
-
Uplink Transmit Power Optimization for Distributed Massive MIMO Systems with 1-Bit ADCs
Authors:
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
This paper addresses the problem of uplink transmit power optimization in distributed massive multiple-input multiple-output systems, where remote radio heads (RRHs) are equipped with 1-bit analog-to-digital converters (ADCs). First, in a scenario where a single RRH serves a single user equipment (UE), the signal-to-noise-and-distortion ratio (SNDR) is shown to be a non-monotonic and unimodal func…
▽ More
This paper addresses the problem of uplink transmit power optimization in distributed massive multiple-input multiple-output systems, where remote radio heads (RRHs) are equipped with 1-bit analog-to-digital converters (ADCs). First, in a scenario where a single RRH serves a single user equipment (UE), the signal-to-noise-and-distortion ratio (SNDR) is shown to be a non-monotonic and unimodal function of the UE transmit power due to the quantization distortion (QD). Upon the introduction of multiple RRHs, adding properly tuned dithering at each RRH is shown to render the SNDR at the output of the joint receiver unimodal. In a scenario with multiple RRHs and UEs, considering the non-monotonic nature of the signal-to-interference-plus-noise-and-distortion ratio (SINDR), both the UE transmit powers and the RRH dithering levels are jointly optimized subject to the min-power and max-min-SINDR criteria, while employing Bussgang-based maximum ratio combining (BMRC) and minimum mean squared error (BMMSE) receivers. To this end, gradient and block coordinate descent methods are introduced to tune the UE transmit powers, whereas a line search coupled with gradient updates is used to adjust the RRH dithering levels. Numerical results demonstrate that jointly optimizing the UE transmit power and the RRH dithering levels can significantly enhance the system performance, thus facilitating joint reception from multiple RRHs across a range of scenarios. Comparing the BMMSE and BMRC receivers, the former offers a better interference and QD alleviation while the latter has a lower computational complexity.
△ Less
Submitted 22 July, 2024;
originally announced July 2024.
-
Optimality of the Bussgang Linear MMSE Channel Estimator for MIMO Systems with 1-Bit ADCs
Authors:
Minhua Ding,
Italo Atzeni,
Antti Tölli,
A. Lee Swindlehurst
Abstract:
In this paper, we study the optimality of the Bussgang linear minimum mean squared error (BLMMSE) channel estimator for multiple-input multiple-output systems with 1-bit analog-to-digital converters. We compare the BLMMSE with the optimal minimum mean squared error (MMSE) channel estimator, which is generally non-linear, and we develop a novel framework based on the orthant probability of a multiv…
▽ More
In this paper, we study the optimality of the Bussgang linear minimum mean squared error (BLMMSE) channel estimator for multiple-input multiple-output systems with 1-bit analog-to-digital converters. We compare the BLMMSE with the optimal minimum mean squared error (MMSE) channel estimator, which is generally non-linear, and we develop a novel framework based on the orthant probability of a multivariate normal distribution to compute the MMSE channel estimate. Then, we analyze the equivalence of the MMSE and BLMMSE channel estimators under specific assumptions on the channel correlation or pilot symbols. Interestingly, the BLMMSE channel estimator turns out to be optimal in several specific cases. Our study culminates with the presentation of a necessary and sufficient condition for the BLMMSE channel estimator to be optimal.
△ Less
Submitted 18 July, 2024;
originally announced July 2024.
-
6G: The Intelligent Network of Everything
Authors:
Harri Pennanen,
Tuomo Hänninen,
Oskari Tervo,
Antti Tölli,
Matti Latva-aho
Abstract:
The global 6G vision has taken its shape after years of international research and development efforts. This work culminated in ITU-R Recommendation on "IMT-2030 Framework". While the definition phase of technological requirements is currently ongoing, 3GPP standardization process on 6G networks is expected to start in 2025 and worldwide commercialization around 2029-2030. This article serves as a…
▽ More
The global 6G vision has taken its shape after years of international research and development efforts. This work culminated in ITU-R Recommendation on "IMT-2030 Framework". While the definition phase of technological requirements is currently ongoing, 3GPP standardization process on 6G networks is expected to start in 2025 and worldwide commercialization around 2029-2030. This article serves as a comprehensive guide to 6G by providing an overall vision, a contemporary survey of the main literature, and an informative tutorial-type presentation style. In our vision, 6G will be based on three fundamental elements: wireless, artificial intelligence, and Internet of Everything. Consequently, 6G can ultimately become the Intelligent Network of Everything while serving as an enabling platform for the next major disruption in mobile communication, called mobile intelligence. The potential of mobile intelligence is that anything can be made connected, intelligent, and aware of its environment. This will revolutionize the way how devices, systems, and applications are designed; how they operate and interact with humans and each other; and how they can be used for the benefit of people, society, and the world in general. After high-level visioning, the main details of 6G are discussed, including fundamental elements, disruptive applications, key use cases, main performance requirements, potential technologies, and defining features. A special focus is given to a comprehensive set of potential 6G technologies, each of which is introduced in a tutorial manner. Finally, we speculate on what comes after 6G and sketch the first high-level vision of 7G. All in all, the objective of this article is to provide a thorough guide to 6G in order to serve as a source of knowledge and inspiration for further research and development work in academia, industry, and standardization bodies.
△ Less
Submitted 28 December, 2024; v1 submitted 12 July, 2024;
originally announced July 2024.
-
On Optimal MMSE Channel Estimation for One-Bit Quantized MIMO Systems
Authors:
Minhua Ding,
Italo Atzeni,
Antti Tölli,
A. Lee Swindlehurst
Abstract:
This paper focuses on the minimum mean squared error (MMSE) channel estimator for multiple-input multiple-output (MIMO) systems with one-bit quantization at the receiver side. Despite its optimality and significance in estimation theory, the MMSE channel estimator has not been fully investigated in this context due to its general non-linearity and computational complexity. Instead, the typically s…
▽ More
This paper focuses on the minimum mean squared error (MMSE) channel estimator for multiple-input multiple-output (MIMO) systems with one-bit quantization at the receiver side. Despite its optimality and significance in estimation theory, the MMSE channel estimator has not been fully investigated in this context due to its general non-linearity and computational complexity. Instead, the typically suboptimal Bussgang linear MMSE (BLMMSE) estimator has been widely adopted. In this work, we develop a new framework to compute the MMSE channel estimator that hinges on computation of the orthant probability of the multivariate normal distribution. Based on this framework, we determine a necessary and sufficient condition for the BLMMSE channel estimator to be optimal and equivalent to the MMSE estimator. Under the assumption of specific channel correlation or pilot symbols, we further utilize the framework to derive analytical expressions for the MMSE channel estimator that are particularly convenient for computation when certain system dimensions become large, thereby enabling a comparison between the BLMMSE and MMSE channel estimators in these cases.
△ Less
Submitted 22 January, 2025; v1 submitted 8 April, 2024;
originally announced April 2024.
-
Combined DL-UL Distributed Beamforming Design for Cell-Free Massive MIMO
Authors:
Bikshapathi Gouda,
Antti Arvola,
Italo Atzeni,
Antti Tölli
Abstract:
We consider a cell-free massive multiple-input multiple-output system with multi-antenna access points (APs) and user equipments (UEs), where the UEs can be served in both the downlink (DL) and uplink (UL) within a resource block. We tackle the combined optimization of the DL precoders and combiners at the APs and DL UEs, respectively, together with the UL combiners and precoders at the APs and UL…
▽ More
We consider a cell-free massive multiple-input multiple-output system with multi-antenna access points (APs) and user equipments (UEs), where the UEs can be served in both the downlink (DL) and uplink (UL) within a resource block. We tackle the combined optimization of the DL precoders and combiners at the APs and DL UEs, respectively, together with the UL combiners and precoders at the APs and UL UEs, respectively. To this end, we propose distributed beamforming designs enabled by iterative bi-directional training (IBT) and based on the minimum mean squared error criterion. To reduce the IBT overhead and thus enhance the effective DL and UL rates, we carry out the distributed beamforming design by assuming that all the UEs are served solely in the DL and then utilize the obtained beamformers for the DL and UL data transmissions after proper scaling. Numerical results show the superiority of the proposed combined DL-UL distributed beamforming design over separate DL and UL designs, especially with short resource blocks.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Coded Multi-User Information Retrieval with a Multi-Antenna Helper Node
Authors:
Milad Abolpour,
MohammadJavad Salehi,
Soheil Mohajer,
Seyed Pooya Shariatpanahi,
Antti Tölli
Abstract:
A novel coding design is proposed to enhance information retrieval in a wireless network of users with partial access to the data, in the sense of observation, measurement, computation, or storage. Information exchange in the network is assisted by a multi-antenna base station (BS), with no direct access to the data. Accordingly, the missing parts of data are exchanged among users through an uplin…
▽ More
A novel coding design is proposed to enhance information retrieval in a wireless network of users with partial access to the data, in the sense of observation, measurement, computation, or storage. Information exchange in the network is assisted by a multi-antenna base station (BS), with no direct access to the data. Accordingly, the missing parts of data are exchanged among users through an uplink (UL) step followed by a downlink (DL) step. In this paper, new coding strategies, inspired by coded caching (CC) techniques, are devised to enhance both UL and DL steps. In the UL step, users transmit encoded and properly combined parts of their accessible data to the BS. Then, during the DL step, the BS carries out the required processing on its received signals and forwards a proper combination of the resulting signal terms back to the users, enabling each user to retrieve the desired information. Using the devised coded data retrieval strategy, the data exchange in both UL and DL steps requires the same communication delay, measured by normalized delivery time (NDT). Furthermore, the NDT of the UL/DL step is shown to coincide with the optimal NDT of the original DL multi-input single-output CC scheme, in which the BS is connected to a centralized data library.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Enhanced Uplink Data Detection for Massive MIMO with 1-Bit ADCs: Analysis and Joint Detection
Authors:
Amin Radbord,
Italo Atzeni,
Antti Tolli
Abstract:
We present a new analytical framework on the uplink data detection for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters (ADCs). We first characterize the expected values of the soft-estimated symbols (after the linear receiver and prior to the data detection), which are affected by the 1-bit quantization during both the channel estimation and the uplink data t…
▽ More
We present a new analytical framework on the uplink data detection for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters (ADCs). We first characterize the expected values of the soft-estimated symbols (after the linear receiver and prior to the data detection), which are affected by the 1-bit quantization during both the channel estimation and the uplink data transmission. In our analysis, we consider conventional receivers such as maximum ratio combining (MRC), zero forcing, and minimum mean squared error (MMSE), with multiple user equipments (UEs) and correlated Rayleigh fading. Additionally, we design a linear minimum mean dispersion (LMMD) receiver tailored for the data detection with 1-bit ADCs, which exploits the expected values of the soft-estimated symbols previously derived. Then, we propose a joint data detection (JD) strategy that exploits the interdependence among the soft-estimated symbols of the interfering UEs, along with its low-complexity variant. These strategies are compared with the robust maximum likelihood data detection with 1-bit ADCs. Numerical results examining the symbol error rate show that MMSE exhibits a considerable performance gain over MRC, whereas the proposed LMMD receiver significantly outperforms all the conventional receivers. Lastly, the proposed JD and its low-complexity variant provide a significant boost in comparison with the single-UE data detection.
△ Less
Submitted 5 September, 2024; v1 submitted 7 December, 2023;
originally announced December 2023.
-
Low-complexity Linear Multicast Beamforming for Cache-aided MIMO Communications
Authors:
Mohammad NaseriTehrani,
MohammadJavad Salehi,
Antti Tölli
Abstract:
A practical and scalable multicast beamformer design in multi-input multi-output~(MIMO) coded caching~(CC) systems is introduced in this paper. The proposed approach allows multicast transmission to multiple groups with partially overlapping user sets using receiver dimensions to distinguish between different group-specific streams. Additionally, it provides flexibility in accommodating various pa…
▽ More
A practical and scalable multicast beamformer design in multi-input multi-output~(MIMO) coded caching~(CC) systems is introduced in this paper. The proposed approach allows multicast transmission to multiple groups with partially overlapping user sets using receiver dimensions to distinguish between different group-specific streams. Additionally, it provides flexibility in accommodating various parameter configurations of the MIMO-CC setup and overcomes practical limitations, such as the requirement to use successive interference cancellation~(SIC) at the receiver, while achieving the same degrees-of-freedom~(DoF). To evaluate the proposed scheme, we define the symmetric rate as the sum rate of the partially overlapping streams received per user, comprising a linear multistream multicast transmission vector and the linear minimum mean square error~(LMMSE) receiver. The resulting non-convex symmetric rate maximization problem is solved using alternative optimization and successive convex approximation~(SCA). Moreover, a fast iterative Lagrangian-based algorithm is developed, significantly reducing the computational overhead compared to previous designs. The effectiveness of our proposed method is demonstrated by extensive simulations.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Optimal Fairness Scheduling for Coded Caching in Multi-AP Multi-antenna WLAN
Authors:
Kagan Akcay,
MohammadJavad Salehi,
Antti Tölli,
Giuseppe Caire
Abstract:
Coded caching (CC) schemes exploit the cumulative cache memory of network users, outperforming traditional uncoded schemes where cache contents are only used locally. Interestingly, this CC gain can also be combined with the spatial multiplexing gain of multi-antenna transmissions. In this paper, we extend the existing results of CC-aided data delivery in multi-access point (AP) wireless local are…
▽ More
Coded caching (CC) schemes exploit the cumulative cache memory of network users, outperforming traditional uncoded schemes where cache contents are only used locally. Interestingly, this CC gain can also be combined with the spatial multiplexing gain of multi-antenna transmissions. In this paper, we extend the existing results of CC-aided data delivery in multi-access point (AP) wireless local area networks (WLAN) and video streaming applications by assuming multi-antenna transmitters at AP nodes. We present two distinct methods for using the extra resource that multi-antenna transmitters provide. While the first method tries to reduce the number of interference links in the network graph, the second one aims to remove inter-stream interference so that users with similar cache contents can be served simultaneously. While both methods provide increased throughput, they differ significantly in the underlying concept. Numerical simulations are used to compare the performance of different methods.
△ Less
Submitted 6 December, 2023; v1 submitted 5 December, 2023;
originally announced December 2023.
-
Doubly 1-Bit Quantized Massive MIMO
Authors:
Italo Atzeni,
Antti Tölli,
Duy H. N. Nguyen,
A. Lee Swindlehurst
Abstract:
Enabling communications in the (sub-)THz band will call for massive multiple-input multiple-output (MIMO) arrays at either the transmit- or receive-side, or at both. To scale down the complexity and power consumption when operating across massive frequency and antenna dimensions, a sacrifice in the resolution of the digital-to-analog/analog-to-digital converters (DACs/ADCs) will be inevitable. In…
▽ More
Enabling communications in the (sub-)THz band will call for massive multiple-input multiple-output (MIMO) arrays at either the transmit- or receive-side, or at both. To scale down the complexity and power consumption when operating across massive frequency and antenna dimensions, a sacrifice in the resolution of the digital-to-analog/analog-to-digital converters (DACs/ADCs) will be inevitable. In this paper, we analyze the extreme scenario where both the transmit- and receive-side are equipped with fully digital massive MIMO arrays and 1-bit DACs/ADCs, which leads to a system with minimum radio-frequency complexity, cost, and power consumption. Building upon the Bussgang decomposition, we derive a tractable approximation of the mean squared error (MSE) between the transmitted data symbols and their soft estimates. Numerical results show that, despite its simplicity, a doubly 1-bit quantized massive MIMO system with very large antenna arrays can deliver an impressive performance in terms of MSE and symbol error rate.
△ Less
Submitted 4 December, 2023;
originally announced December 2023.
-
Pilot-Based Uplink Power Control in Single-UE Massive MIMO Systems With 1-Bit ADCs
Authors:
Amila Ravinath,
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
We propose uplink power control (PC) methods for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters, which are specifically tailored to address the non-monotonic data detection performance with respect to the transmit power of the user equipment (UE). Considering a single UE, we design a multi-amplitude pilot sequence to capture the aforementioned non-monotonici…
▽ More
We propose uplink power control (PC) methods for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters, which are specifically tailored to address the non-monotonic data detection performance with respect to the transmit power of the user equipment (UE). Considering a single UE, we design a multi-amplitude pilot sequence to capture the aforementioned non-monotonicity, which is utilized at the base station to derive UE transmit power adjustments via single-shot or differential power control (DPC) techniques. Both methods enable closed-loop uplink PC using different feedback approaches. The single-shot method employs one-time multi-bit feedback, while the DPC method relies on continuous adjustments with 1-bit feedback. Numerical results demonstrate the superiority of the proposed schemes over conventional closed-loop uplink PC techniques.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
Cache-Aided Communications in MISO Networks with Dynamic User Behavior
Authors:
Milad Abolpour,
MohammadJavad Salehi,
Antti Tölli
Abstract:
Coded caching (CC) can substantially enhance network performance by leveraging memory as an additional communication resource. However, the use of CC is challenging in various practical applications due to dynamic user behavior. The existing solutions, based on shared caching, cannot directly handle all scenarios where users freely enter and depart the network at any time as they are constrained b…
▽ More
Coded caching (CC) can substantially enhance network performance by leveraging memory as an additional communication resource. However, the use of CC is challenging in various practical applications due to dynamic user behavior. The existing solutions, based on shared caching, cannot directly handle all scenarios where users freely enter and depart the network at any time as they are constrained by specific conditions on network parameters. This paper proposes a universally applicable shared-caching scheme for dynamic setups without any restriction on network parameters. The closed-form expressions for the achievable degrees of freedom (DoF) are computed for the resulting generalized scheme, and are shown to achieve the existing optimal bounds of the shared-cache model. Furthermore, a successive-interference-cancellation-free extension based on a fast iterative optimized beamformer design is devised to optimize the use of excess spatial dimensions freed by cache-aided interference cancellation. Extensive numerical experiments are carried out to assess the performance of the proposed scheme. In particular, the results demonstrate that while a dynamic setup may achieve a DoF substantially lower than the optimal DoF of shared caching, our proposed scheme significantly improves the performance at the finite signal-to-noise ratio compared to unicasting, which only benefits from the local caching gain.
△ Less
Submitted 6 May, 2024; v1 submitted 20 October, 2023;
originally announced October 2023.
-
Uplink Power Control for Distributed Massive MIMO with 1-Bit ADCs
Authors:
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
We consider the problem of uplink power control for distributed massive multiple-input multiple-output systems where the base stations (BSs) are equipped with 1-bit analog-to-digital converters (ADCs). The scenario with a single-user equipment (UE) is first considered to provide insights into the signal-tonoise-and-distortion ratio (SNDR). With a single BS, the SNDR is a unimodal function of the U…
▽ More
We consider the problem of uplink power control for distributed massive multiple-input multiple-output systems where the base stations (BSs) are equipped with 1-bit analog-to-digital converters (ADCs). The scenario with a single-user equipment (UE) is first considered to provide insights into the signal-tonoise-and-distortion ratio (SNDR). With a single BS, the SNDR is a unimodal function of the UE transmit power. With multiple BSs, the SNDR at the output of the joint combiner can be made unimodal by adding properly tuned dithering at each BS. As a result, the UE can be effectively served by multiple BSs with 1-bit ADCs. Considering the signal-to-interference-plus-noise-anddistortion ratio (SINDR) in the multi-UE scenario, we aim at optimizing the UE transmit powers and the dithering at each BS based on the min-power and max-min-SINDR criteria. To this end, we propose three algorithms with different convergence and complexity properties. Numerical results show that, if the desired SINDR can only be achieved via joint combining across multiple BSs with properly tuned dithering, the optimal UE transmit power is imposed by the distance to the farthest serving BS (unlike in the unquantized case). In this context, dithering plays a crucial role in enhancing the SINDR, especially for UEs with significant path loss disparity among the serving BSs.
△ Less
Submitted 18 September, 2023;
originally announced September 2023.
-
Fairness Enhancement of UAV Systems with Hybrid Active-Passive RIS
Authors:
Nhan Thanh Nguyen,
Van-Dinh Nguyen,
Hieu Van Nguyen,
Qingqing Wu,
Antti Tolli,
Symeon Chatzinotas,
Markku Juntti
Abstract:
We consider unmanned aerial vehicle (UAV)-enabled wireless systems where downlink communications between a multi-antenna UAV and multiple users are assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). We aim at a fairness design of two typical UAV-enabled networks, namely the static-UAV network where the UAV is deployed at a fixed location to serve all users at the same ti…
▽ More
We consider unmanned aerial vehicle (UAV)-enabled wireless systems where downlink communications between a multi-antenna UAV and multiple users are assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). We aim at a fairness design of two typical UAV-enabled networks, namely the static-UAV network where the UAV is deployed at a fixed location to serve all users at the same time, and the mobile-UAV network which employs the time division multiple access protocol. In both networks, our goal is to maximize the minimum rate among users through jointly optimizing the UAV's location/trajectory, transmit beamformer, and RIS coefficients. The resulting problems are highly nonconvex due to a strong coupling between the involved variables. We develop efficient algorithms based on block coordinate ascend and successive convex approximation to effectively solve these problems in an iterative manner. In particular, in the optimization of the mobile-UAV network, closed-form solutions to the transmit beamformer and RIS passive coefficients are derived. Numerical results show that a hybrid RIS equipped with only 4 active elements and a power budget of 0 dBm offers an improvement of 38%-63% in minimum rate, while that achieved by a passive RIS is only about 15%, with the same total number of elements.
△ Less
Submitted 20 September, 2023; v1 submitted 24 June, 2023;
originally announced June 2023.
-
Low-Complexity Multi-Antenna Coded Caching Using Location-Aware Placement Delivery Arrays
Authors:
Hamidreza Bakhshzad Mahmoodi,
MohammadJavad Salehi,
Antti Tolli
Abstract:
A location-aware multi-antenna coded caching scheme is proposed for applications with location-dependent data requests, such as wireless immersive experience, where users are immersed in a three-dimensional virtual world. The wireless connectivity conditions vary as the users move within the application area motivating the use of a non-uniform cache memory allocation process to avoid excessive del…
▽ More
A location-aware multi-antenna coded caching scheme is proposed for applications with location-dependent data requests, such as wireless immersive experience, where users are immersed in a three-dimensional virtual world. The wireless connectivity conditions vary as the users move within the application area motivating the use of a non-uniform cache memory allocation process to avoid excessive delivery time for users located in wireless bottleneck areas. To this end, a location-aware placement and delivery array (LAPDA) is designed for cache-aided multiantenna data delivery with a fast converging, iterative linear beamforming process. The underlying weighted max-min transmit precoder design enables the proposed scheme to serve users in poor connectivity areas with smaller amounts of data while simultaneously delivering larger amounts to other users. Our new scheme is suitable for large networks due to its linear transceiver structure and it is not constrained by the number of users, cache size, or the number of antennas at the transmitter, unlike the existing schemes. Despite non-uniform cache placement, the proposed scheme still achieves a significant degree of coded caching gain that is additive to the multiplexing gain and greatly outperforms the conventional symmetric CC schemes in terms of both average and 95-percentile delivery time.
△ Less
Submitted 9 July, 2023; v1 submitted 11 May, 2023;
originally announced May 2023.
-
Multicast Transmission Design with Enhanced DoF for MIMO Coded Caching Systems
Authors:
Mohammad NaseriTehrani,
MohammadJavad Salehi,
Antti Tölli
Abstract:
Integrating coded caching (CC) into multi-input multi-output (MIMO) setups significantly enhances the achievable degrees of freedom (DoF). We consider a cache-aided MIMO configuration with a CC gain $t$, where a server with $L$ Tx-antennas communicates with $K$ users, each equipped with $G$ Rx-antennas. Similar to existing works, we also extend a core CC approach, designed initially for multi-inpu…
▽ More
Integrating coded caching (CC) into multi-input multi-output (MIMO) setups significantly enhances the achievable degrees of freedom (DoF). We consider a cache-aided MIMO configuration with a CC gain $t$, where a server with $L$ Tx-antennas communicates with $K$ users, each equipped with $G$ Rx-antennas. Similar to existing works, we also extend a core CC approach, designed initially for multi-input single-output (MISO) scenarios, to the MIMO setup. However, in the proposed MIMO strategy, rather than replicating the transmit scheme from the MISO setup, the number of users $Ω$ served in each transmission is fine-tuned to maximize DoF. As a result, an optimized DoF of ${\max_{β, Ω}}{Ωβ}$ is achieved, where ${β\le \mathrm{min}\big(G,L \binom{Ω-1}{t}}\Big/{1 + (Ω- t-1)\binom{Ω-1}{t}}\big)$ is the number of parallel streams decoded by each user. For the considered MIMO-CC setup, we also introduce an effective multicast transmit covariance matrix design for the symmetric rate maximization objective solved iteratively via successive convex approximation (SCA). Finally, numerical simulations verify the enhanced DoF and improved performance of the proposed design.
△ Less
Submitted 23 November, 2023; v1 submitted 26 April, 2023;
originally announced April 2023.
-
Cache-Aided Communications in MISO Networks with Dynamic User Behavior: A Universal Solution
Authors:
Milad Abolpour,
MohammadJavad Salehi,
Antti Tölli
Abstract:
A practical barrier to the implementation of cache-aided networks is dynamic and unpredictable user behavior. In dynamic setups, users can freely depart and enter the network at any moment. The shared caching concept has the potential to handle this issue by assigning $K$ users to $P$ caching profiles, where all $η_{p}$ users assigned to profile $p$ store the same cache content defined by that pro…
▽ More
A practical barrier to the implementation of cache-aided networks is dynamic and unpredictable user behavior. In dynamic setups, users can freely depart and enter the network at any moment. The shared caching concept has the potential to handle this issue by assigning $K$ users to $P$ caching profiles, where all $η_{p}$ users assigned to profile $p$ store the same cache content defined by that profile. The existing schemes, however, cannot be applied in general and are not dynamic in the true sense as they put constraints on the transmitter-side spatial multiplexing gain $α$. Specifically, they work only if $α\leq \min_{p} η_{p}$ or $α\geq \hatη$, where in the latter case, $γ$ is the normalized cache size of each user, $\hatη$ is an arbitrary parameter satisfying $1 \leq \hatη \leq \max_{p} η_{p}$, and the extra condition of $α\geq Kγ$ should also be met. In this work, we propose a universal caching scheme based on the same shared-cache model that can be applied to any dynamic setup, extending the working region of existing schemes to networks with $\min_{p} η_{p} \leq α\leq \hatη$ and removing any other constraints of existing schemes. We also derive the closed-form expressions for the achievable degrees-of-freedom (DoF) of the proposed scheme and show that it achieves the optimal DoF for uniform user distributions. Notably, it is the first scheme to achieve the optimal DoF of $Kγ+α$ for networks with uniform user distribution, $α> \hatη$, and non-integer $\fracα{\hatη}$, without imposing any other constraints. Finally, we use numerical simulations to assess how non-uniform user distribution impacts the DoF performance and illustrate that the proposed scheme provides a noticeable improvement over unicasting for uneven distributions.
△ Less
Submitted 23 April, 2023;
originally announced April 2023.
-
Multi-User Data Detection in Massive MIMO with 1-Bit ADCs
Authors:
Amin Radbord,
Italo Atzeni,
Antti Tölli
Abstract:
We provide new analytical results on the uplink data detection in massive multiple-input multiple-output systems with 1-bit analog-to-digital converters. The statistical properties of the soft-estimated symbols (i.e., after linear combining and prior to the data detection process) have been previously characterized only for a single user equipment (UE) and uncorrelated Rayleigh fading. In this pap…
▽ More
We provide new analytical results on the uplink data detection in massive multiple-input multiple-output systems with 1-bit analog-to-digital converters. The statistical properties of the soft-estimated symbols (i.e., after linear combining and prior to the data detection process) have been previously characterized only for a single user equipment (UE) and uncorrelated Rayleigh fading. In this paper, we consider a multi-UE setting with correlated Rayleigh fading, where the soft-estimated symbols are obtained by means of maximum ratio combining based on imperfectly estimated channels. We derive a closed-form expression of the expected value of the soft-estimated symbols, which allows to understand the impact of the specific data symbols transmitted by the interfering UEs. Building on this result, we design efficient data detection strategies based on the minimum distance criterion, which are compared in terms of symbol error rate and complexity.
△ Less
Submitted 31 March, 2023;
originally announced March 2023.
-
Pilot-Aided Distributed Multi-Group Multicast Precoding Design for Cell-Free Massive MIMO
Authors:
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
We propose fully distributed multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems with modest training overhead. We target the minimization of the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with a weighted sum MSE minimization to simplify the computation and signaling. To design the join…
▽ More
We propose fully distributed multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems with modest training overhead. We target the minimization of the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with a weighted sum MSE minimization to simplify the computation and signaling. To design the joint network-wide multi-group multicast precoders at the base stations (BSs) and the combiners at the user equipments (UEs) in a fully distributed fashion, we adopt an iterative bi-directional training scheme with UE-specific or group-specific precoded uplink pilots and group-specific precoded downlink pilots. To this end, we introduce a new group-specific uplink training resource that entirely eliminates the need for backhaul signaling for the channel state information (CSI) exchange. The precoders are optimized locally at each BS by means of either best-response or gradient-based updates, and the convergence of the two approaches is analyzed with respect to the centralized implementation with perfect CSI. Finally, numerical results show that the proposed distributed methods greatly outperform conventional cell-free massive MIMO precoding designs that rely solely on local CSI.
△ Less
Submitted 31 January, 2024; v1 submitted 14 November, 2022;
originally announced November 2022.
-
Distributed Precoding Design for Multi-Group Multicasting in Cell-Free Massive MIMO
Authors:
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
We consider multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems. To optimize the transmit and receive beamforming strategies, we focus on minimizing the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with the sum MSE to simplify the computation and signaling. We adopt an iterative bi-direct…
▽ More
We consider multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems. To optimize the transmit and receive beamforming strategies, we focus on minimizing the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with the sum MSE to simplify the computation and signaling. We adopt an iterative bi-directional training scheme with uplink and downlink precoded pilots to cooperatively design the multi-group multicast precoders at each base station and the combiners at each user equipment in a distributed fashion. An additional group-specific uplink training resource is introduced, which entirely eliminates the need for backhaul signaling for channel state information (CSI) exchange. We also propose a simpler distributed precoding design based solely on group-specific pilots, which can be useful in the case of scarce training resources. Numerical results show that the proposed distributed methods greatly outperform conventional cell-free massive MIMO precoding designs that rely solely on local CSI.
△ Less
Submitted 10 November, 2022;
originally announced November 2022.
-
Multicast Beamformer Design for MIMO Coded Caching Systems
Authors:
MohammadJavad Salehi,
Mohammad NaseriTehrani,
Antti Tölli
Abstract:
Coded caching (CC) techniques have been shown to be conveniently applicable in multi-input multi-output (MIMO) systems. In a $K$-user network with spatial multiplexing gains of $L$ at the transmitter and $G$ at every receiver, if each user can cache a fraction $γ$ of the file library, a total number of $GKγ+ L$ data streams can be served in parallel. In this paper, we focus on improving the finite…
▽ More
Coded caching (CC) techniques have been shown to be conveniently applicable in multi-input multi-output (MIMO) systems. In a $K$-user network with spatial multiplexing gains of $L$ at the transmitter and $G$ at every receiver, if each user can cache a fraction $γ$ of the file library, a total number of $GKγ+ L$ data streams can be served in parallel. In this paper, we focus on improving the finite-SNR performance of MIMO-CC systems. We first consider a MIMO-CC scheme that relies only on unicasting individual data streams, and then, introduce a decomposition strategy to design a new scheme that delivers the same data streams through multicasting of $G$ parallel codewords. We discuss how optimized beamformers could be designed for each scheme and use numerical simulations to compare their finite-SNR performance. It is shown that while both schemes serve the same number of streams, multicasting provides notable performance improvements. This is because, with multicasting, transmission vectors are built with fewer beamformers, leading to more efficient usage of available power resources.
△ Less
Submitted 2 November, 2022;
originally announced November 2022.
-
Multi-antenna Coded Caching at Finite-SNR: Breaking Down the Gain Structure
Authors:
MohammadJavad Salehi,
Antti Tölli
Abstract:
Multi-antenna coded caching (CC) techniques are considered viable options for achieving higher data rates in future networks, especially for the prominent use case of multimedia-driven applications. However, despite their information-theoretic analyses, which are thoroughly studied in the literature, the research on the finite-SNR performance of multi-antenna CC techniques is not yet mature. In th…
▽ More
Multi-antenna coded caching (CC) techniques are considered viable options for achieving higher data rates in future networks, especially for the prominent use case of multimedia-driven applications. However, despite their information-theoretic analyses, which are thoroughly studied in the literature, the research on the finite-SNR performance of multi-antenna CC techniques is not yet mature. In this paper, we try bridging this gap by breaking down, categorizing, and studying the effect of six crucial parameters affecting the finite-SNR performance of multi-antenna CC schemes. We also investigate the interaction of different parameters and clarify how they could affect the implementation complexity in terms of the necessary computation and subpacketization. Theoretical discussions are followed and verified by numerical analysis.
△ Less
Submitted 30 December, 2022; v1 submitted 19 October, 2022;
originally announced October 2022.
-
Polarization Diversity-enabled LOS/NLOS Identification via Carrier Phase Measurements
Authors:
Onel L. A. López,
Dileep Kumar,
Antti Tölli
Abstract:
The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenom…
▽ More
The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenomenon to propose a threshold-based LOS/NLOS classifier exploiting weighted differential carrier phase measurements over a single link with different polarization configurations. Operation in either full or limited polarization diversity systems is possible. We develop a framework for assessing the performance of the proposed classifier, and show through simulations the performance impact of the reflecting materials in NLOS scenarios. For instance, the classifier is far more efficient in NLOS scenarios with wooden reflectors than in those with metallic reflectors. Numerical results evince the potential performance gains from exploiting full polarization diversity, properly weighting the differential carrier phase measurements, and using multi-carrier/tone transmissions. Finally, we show that the optimum decision threshold is inversely proportional to the path power gain in dB, while it does not depend significantly on the material of potential NLOS reflectors.
△ Less
Submitted 15 January, 2023; v1 submitted 31 May, 2022;
originally announced June 2022.
-
A Variational Bayesian Perspective on Massive MIMO Detection
Authors:
Duy H. N. Nguyen,
Italo Atzeni,
Antti Tölli,
A. Lee Swindlehurst
Abstract:
Optimal data detection in massive multiple-input multiple-output (MIMO) systems requires prohibitive computational complexity. A variety of detection algorithms have been proposed in the literature, offering different trade-offs between complexity and detection performance. In this paper, we build upon variational Bayes (VB) inference to design low-complexity multiuser detection algorithms for mas…
▽ More
Optimal data detection in massive multiple-input multiple-output (MIMO) systems requires prohibitive computational complexity. A variety of detection algorithms have been proposed in the literature, offering different trade-offs between complexity and detection performance. In this paper, we build upon variational Bayes (VB) inference to design low-complexity multiuser detection algorithms for massive MIMO systems. We first examine the massive MIMO detection problem with perfect channel state information at the receiver (CSIR) and show that a conventional VB method with known noise variance yields poor detection performance. To address this limitation, we devise two new VB algorithms that use the noise variance and covariance matrix postulated by the algorithms themselves. We further develop the VB framework for massive MIMO detection with imperfect CSIR. Simulation results show that the proposed VB methods achieve significantly lower detection errors compared with existing schemes for a wide range of channel models.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Coded Caching and Spatial Multiplexing Gain Trade-off in Dynamic MISO Networks
Authors:
Milad Abolpour,
MohammadJavad Salehi,
Antti Tolli
Abstract:
The global caching gain of multi-antenna coded caching techniques can be also mostly achieved in dynamic network setups, where the cache contents of users are dictated by a central server, and each user can freely join or leave the network at any moment. In the dynamic setup, users are assigned to a limited set of caching profiles and the non-uniformness in the number of users assigned to each pro…
▽ More
The global caching gain of multi-antenna coded caching techniques can be also mostly achieved in dynamic network setups, where the cache contents of users are dictated by a central server, and each user can freely join or leave the network at any moment. In the dynamic setup, users are assigned to a limited set of caching profiles and the non-uniformness in the number of users assigned to each profile is compensated during the delivery phase by either adding phantom users for multicasting or serving a subset of users with unicast transmissions. In this paper, we perform a thorough analysis and provide closed-form representations of the achievable degrees of freedom (DoF) in such hybrid schemes, and assess the inherent trade-off between the global caching and spatial multiplexing gains caused by either adding phantom users or serving parts of the data through unicasting.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
Hybrid Active-Passive Reconfigurable Intelligent Surface-Assisted Multi-User MISO Systems
Authors:
Nhan Thanh Nguyen,
Van-Dinh Nguyen,
Qingqing Wu,
Antti Tolli,
Symeon Chatzinotas,
Markku Juntti
Abstract:
We consider a multi-user multiple-input single-output (MISO) communications system which is assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). Unlike conventional passive RISs, hybrid RIS is equipped with a few active elements with the ability to reflect and amplify incident signals to significantly improve the system performance. Towards a fairness-oriented design, we m…
▽ More
We consider a multi-user multiple-input single-output (MISO) communications system which is assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). Unlike conventional passive RISs, hybrid RIS is equipped with a few active elements with the ability to reflect and amplify incident signals to significantly improve the system performance. Towards a fairness-oriented design, we maximize the minimum rate among all users through jointly optimizing the transmit beamforming vectors and RIS reflecting/amplifying coefficients. Combining tools from block coordinate ascent and successive convex approximation, the challenging nonconvex problem is efficiently solved by a low-complexity iterative algorithm. The numerical results show that a hybrid RIS with 4 active elements out of a total of 50 elements with a power budget of -1 dBm offers an improvement of up to 80% to the considered system, while that achieved by a fully passive RIS is only 27%.
△ Less
Submitted 18 March, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Enhancing Next-Generation Extended Reality Applications with Coded Caching
Authors:
MohammadJavad Salehi,
Kari Hooli,
Jari Hulkkonen,
Antti Tolli
Abstract:
The next evolutionary step in human-computer interfaces will bring forward immersive digital experiences that submerge users in a 3D world while allowing them to interact with virtual or twin objects. Accordingly, various collaborative extended reality (XR) applications are expected to emerge, imposing stringent performance requirements on the underlying wireless connectivity infrastructure. In th…
▽ More
The next evolutionary step in human-computer interfaces will bring forward immersive digital experiences that submerge users in a 3D world while allowing them to interact with virtual or twin objects. Accordingly, various collaborative extended reality (XR) applications are expected to emerge, imposing stringent performance requirements on the underlying wireless connectivity infrastructure. In this paper, we examine how novel multi-antenna coded caching (CC) techniques can facilitate high-rate low-latency communications and improve users' quality of experience (QoE) in our envisioned multi-user XR scenario. Specifically, we discuss how these techniques make it possible to prioritize the content relevant to wireless bottleneck areas while enabling the cumulative cache memory of the users to be utilized as an additional communication resource. In this regard, we first explore recent advancements in multi-antenna CC that facilitate the efficient use of distributed in-device memory resources. Then, we review how XR application requirements are addressed within the third-generation partnership project (3GPP) framework and how our envisioned XR scenario relates to the foreseen use cases. Finally, we identify new challenges arising from integrating CC techniques into multi-user XR scenarios and propose novel solutions to address them in practice.
△ Less
Submitted 11 June, 2023; v1 submitted 11 February, 2022;
originally announced February 2022.
-
Asymmetric Coded Caching for Multi-Antenna Location-Dependent Content Delivery
Authors:
Hamidreza Bakhshzad Mahmoodi,
MohammadJavad Salehi,
Antti Tölli
Abstract:
Efficient usage of in-device storage and computation capabilities are key solutions to support data-intensive applications such as immersive digital experiences. This paper proposes a location-dependent multi-antenna coded caching -based content delivery scheme tailored specifically for wireless immersive viewing applications. First, a novel memory allocation process incentivizes the content relev…
▽ More
Efficient usage of in-device storage and computation capabilities are key solutions to support data-intensive applications such as immersive digital experiences. This paper proposes a location-dependent multi-antenna coded caching -based content delivery scheme tailored specifically for wireless immersive viewing applications. First, a novel memory allocation process incentivizes the content relevant to the identified wireless bottleneck areas. This enables a trade-off between local and global caching gains and results in unequal fractions of location-dependent multimedia content cached by each user. Then, a novel packet generation process is carried out during the subsequent delivery phase, given the asymmetric cache placement. During this phase, the number of packets transmitted to each user is the same, while the sizes of the packets are proportional to the corresponding location-dependent cache ratios. In this regard, each user is served with location-specific content using joint multicast beamforming and a multi-rate modulation scheme that simultaneously benefits from global caching and spatial multiplexing gains. Numerical experiments and mathematical analysis demonstrate significant performance gains compared to the state-of-the-art.
△ Less
Submitted 16 February, 2023; v1 submitted 27 January, 2022;
originally announced January 2022.
-
Latency-Aware Multi-antenna SWIPT System with Battery-Constrained Receivers
Authors:
Dileep Kumar,
Onel L. Alcaraz López,
Satya Krishna Joshi,
Antti Tölli
Abstract:
Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. T…
▽ More
Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. The battery depletion phenomenon is avoided by preemptively incorporating information regarding the receivers' battery state and EH fluctuations into the resource allocation design. The resulting time-average sum-power minimization problem is temporally correlated, non-convex (including mutually coupled latency-battery queue dynamics), and in general intractable. We use the Lyapunov optimization framework and derive a dynamic control algorithm to transform the original problem into a sequence of deterministic and independent subproblems, which are then solved via two alternative approaches: i) semidefinite relaxation combined with fractional programming, and ii) successive convex approximation. Furthermore, we design a low-complexity closed-form iterative algorithm exploiting the Karush-Kuhn-Tucker optimality conditions for a specific scenario with delay bounded batteryless receivers. Numerical results provide insights on the robustness of the proposed design to realize an energy-efficient SWIPT system while ensuring latency and EH requirements in a time dynamic mobile access network.
△ Less
Submitted 22 October, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Low-Resolution Massive MIMO Under Hardware Power Consumption Constraints
Authors:
Italo Atzeni,
Antti Tölli,
Giuseppe Durisi
Abstract:
We consider a fully digital massive multiple-input multiple-output architecture with low-resolution analog-to-digital/digital-to-analog converters (ADCs/DACs) at the base station (BS) and analyze the performance trade-off between the number of BS antennas, the resolution of the ADCs/DACs, and the bandwidth. Assuming a hardware power consumption constraint, we determine the relationship between the…
▽ More
We consider a fully digital massive multiple-input multiple-output architecture with low-resolution analog-to-digital/digital-to-analog converters (ADCs/DACs) at the base station (BS) and analyze the performance trade-off between the number of BS antennas, the resolution of the ADCs/DACs, and the bandwidth. Assuming a hardware power consumption constraint, we determine the relationship between these design parameters by using a realistic model for the power consumption of the ADCs/DACs and the radio frequency chains. Considering uplink pilot-aided channel estimation, we build on the Bussgang decomposition to derive tractable expressions for uplink and downlink ergodic achievable sum rates. Numerical results show that the ergodic performance is boosted when many BS antennas with very low resolution (i.e., 2 to 3 bits) are adopted in both the uplink and the downlink.
△ Less
Submitted 3 December, 2021;
originally announced December 2021.
-
Low-Subpacketization Multi-Antenna Coded Caching for Dynamic Networks
Authors:
MohammadJavad Salehi,
Emanuele Parrinello,
Hamidreza Bakhshzad Mahmoodi,
Antti Tolli
Abstract:
Multi-antenna coded caching combines a global caching gain, proportional to the total cache size in the network, with an additional spatial multiplexing gain that stems from multiple transmitting antennas. However, classic centralized coded caching schemes are not suitable for dynamic networks as they require prior knowledge of the number of users to indicate what data should be cached at each use…
▽ More
Multi-antenna coded caching combines a global caching gain, proportional to the total cache size in the network, with an additional spatial multiplexing gain that stems from multiple transmitting antennas. However, classic centralized coded caching schemes are not suitable for dynamic networks as they require prior knowledge of the number of users to indicate what data should be cached at each user during the placement phase. On the other hand, fully decentralized schemes provide comparable gains to their centralized counterparts only when the number of users is very large. In this paper, we propose a novel multi-antenna coded caching scheme for dynamic networks, where instead of defining individual cache contents, we associate users with a limited set of predefined caching profiles. Then, during the delivery phase, we aim at achieving a combined caching and spatial multiplexing gain, comparable to a large extent with the ideal case of fully centralized schemes. The resulting scheme imposes small subpacketization and beamforming overheads, is robust under dynamic network conditions, and incurs small finite-SNR performance loss compared with centralized schemes.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
Joint Minimum DL-UL Rate Maximization for Cell-Free Massive MIMO
Authors:
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
In cell-free massive multiple-input multiple-output (MIMO) systems, the beamforming strategies at the base stations (BSs) and user equipments (UEs) can be computed building on bi-directional training. However, the precoding/decoding optimization in the downlink (DL) and in the uplink (UL) generally requires two separate bi-directional training phases, which can be wasteful in the case of short sch…
▽ More
In cell-free massive multiple-input multiple-output (MIMO) systems, the beamforming strategies at the base stations (BSs) and user equipments (UEs) can be computed building on bi-directional training. However, the precoding/decoding optimization in the downlink (DL) and in the uplink (UL) generally requires two separate bi-directional training phases, which can be wasteful in the case of short scheduling blocks. This paper proposes a framework to reduce the bi-directional training overhead by considering a common beamforming training strategy for both DL and UL when the UEs to be served in the two directions are the same. In doing so, we consider the problem of maximizing the (weighted) minimum DL-UL rate among all the UEs. Numerical results show that, in scenarios with short scheduling blocks, the proposed framework outperforms the case where the DL and UL beamforming strategies are computed individually via two separate bi-directional training phases thanks to the reduced training overhead. Even more substantial gains are observed with respect to the case with a single bi-directional training phase, where the DL (resp. UL) beamforming strategies are reused in the UL (resp. DL).
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
A Low-Subpacketization High-Performance MIMO Coded Caching Scheme
Authors:
MohammadJavad Salehi,
Hamidreza Bakhshzad Mahmoodi,
Antti Tölli
Abstract:
In this paper, we study how coded caching can be efficiently applied to multiple-input multiple-output (MIMO) communications. This is an extension to cache-aided multiple-input single-output (MISO) communications, where it is shown that with an $L$-antenna transmitter and coded caching gain $t$, a cumulative coded caching and spatial multiplexing gain of $t+L$ is achievable. We show that, interest…
▽ More
In this paper, we study how coded caching can be efficiently applied to multiple-input multiple-output (MIMO) communications. This is an extension to cache-aided multiple-input single-output (MISO) communications, where it is shown that with an $L$-antenna transmitter and coded caching gain $t$, a cumulative coded caching and spatial multiplexing gain of $t+L$ is achievable. We show that, interestingly, for MIMO setups with $G$-antenna receivers, a coded caching gain larger than MISO setups by a multiplicative factor of $G$ is possible, and the full coded caching and spatial multiplexing gain of $Gt+L$ is also achievable. Furthermore, we propose a novel algorithm for building low-subpacketization, high-performance MIMO coded caching schemes using a large class of existing MISO schemes.
△ Less
Submitted 4 October, 2021; v1 submitted 21 September, 2021;
originally announced September 2021.
-
Latency-Constrained Highly-Reliable mmWave Communication via Multi-point Connectivity
Authors:
Dileep Kumar,
Satya Joshi,
Antti Tölli
Abstract:
The sensitivity of millimeter-wave (mmWave) radio channel to blockage is a fundamental challenge in achieving low-latency and ultra-reliable connectivity. In this paper, we explore the viability of using coordinated multi-point (CoMP) transmission for a delay bounded and reliable mmWave communication. We propose a novel blockage-aware algorithm for the sum-power minimization problem under the user…
▽ More
The sensitivity of millimeter-wave (mmWave) radio channel to blockage is a fundamental challenge in achieving low-latency and ultra-reliable connectivity. In this paper, we explore the viability of using coordinated multi-point (CoMP) transmission for a delay bounded and reliable mmWave communication. We propose a novel blockage-aware algorithm for the sum-power minimization problem under the user-specific latency requirements in a dynamic mobile access network. We use the Lyapunov optimization framework, and provide a dynamic control algorithm, which efficiently transforms a time-average stochastic problem into a sequence of deterministic subproblems. A robust beamformer design is then proposed by exploiting the queue backlogs and channel information, that efficiently allocates the required radio and cooperation resources, and proactively leverages the multi-antenna spatial diversity according to the instantaneous needs of the users. Further, to adapt to the uncertainties of the mmWave channel, we consider a pessimistic estimate of the rates over link blockage combinations and an adaptive selection of the CoMP serving set from the available remote radio units (RRUs). Moreover, after the relaxation of coupled and non-convex constraints via the Fractional Program (FP) techniques, a low-complexity closed-form iterative algorithm is provided by solving a system of Karush-Kuhn-Tucker (KKT) optimality conditions. The simulation results manifest that, in the presence of random blockages, the proposed methods outperform the baseline scenarios and provide power-efficient, high-reliable, and low-latency mmWave communication.
△ Less
Submitted 20 August, 2021;
originally announced August 2021.
-
Uplink Data Detection Analysis of 1-Bit Quantized Massive MIMO
Authors:
Italo Atzeni,
Antti Tölli
Abstract:
This paper presents an analytical framework for the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs). Considering the single-user case, we provide closed-form expressions of the expected value and the variance of the estimated symbols when maximum ratio combining is adopted at the base station (BS) along with their asymptotic be…
▽ More
This paper presents an analytical framework for the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs). Considering the single-user case, we provide closed-form expressions of the expected value and the variance of the estimated symbols when maximum ratio combining is adopted at the base station (BS) along with their asymptotic behavior at high signal-to-noise ratio (SNR). These results are exploited to enhance the performance of maximum likelihood detection by taking into account the dispersion of the estimated symbols about their expected values. The symbol error rate with 1-bit ADCs is evaluated with respect to the number of BS antennas, the SNR, and the pilot length used for the channel estimation. The proposed analysis highlights a fundamental SNR trade-off, according to which operating at the right SNR considerably improves the data detection accuracy.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
Massive MIMO with Radio Stripes for Indoor Wireless Energy Transfer
Authors:
Onel L. A. López,
Dileep Kumar,
Richard Demo Souza,
Petar Popovski,
Antti Tölli,
Matti Latva-aho
Abstract:
Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approx…
▽ More
Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approximation (SCA), and maximum ratio transmission (MRT) techniques, we derive optimal and sub-optimal precoders aimed at minimizing the radio stripes' transmit power while exploiting information of the power transfer efficiency of the EH circuits at the UEs. Moreover, we propose an analytical framework to assess and control the electromagnetic field (EMF) radiation exposure in the considered indoor scenario. Numerical results show that i) the EMF radiation exposure can be more easily controlled at higher frequencies at the cost of a higher transmit power consumption, ii) training is not a very critical factor for the considered indoor system, iii) MRT/SCA-based precoders are particularly appealing when serving a small number of UEs, thus, especially suitable for implementation in a time domain multiple access (TDMA) scheduling framework, and iv) TDMA is more efficient than spatial domain multiple access (SDMA) when serving a relatively small number of UEs. Results suggest that additional boosting performance strategies are needed to increase the overall system efficiency, thus making the technology viable in practice.
△ Less
Submitted 28 February, 2022; v1 submitted 23 June, 2021;
originally announced June 2021.
-
Low-complexity Multicast Beamforming for Multi-stream Multi-group Communications
Authors:
Hamidreza Bakhshzad Mahmoodi,
Bikshapathi Gouda,
MohammadJavad Salehi,
Antti Tolli
Abstract:
In this paper, assuming multi-antenna transmitter and receivers, we consider multicast beamformer design for the weighted max-min-fairness (WMMF) problem in a multi-stream multi-group communication setup. Unlike the single-stream scenario, the WMMF objective in this setup is not equivalent to maximizing the minimum weighted SINR due to the summation over the rates of multiple streams. Therefore, t…
▽ More
In this paper, assuming multi-antenna transmitter and receivers, we consider multicast beamformer design for the weighted max-min-fairness (WMMF) problem in a multi-stream multi-group communication setup. Unlike the single-stream scenario, the WMMF objective in this setup is not equivalent to maximizing the minimum weighted SINR due to the summation over the rates of multiple streams. Therefore, the non-convex problem at hand is first approximated with a convex one and then solved using Karush-Kuhn-Tucker (KKT) conditions. Then, a practically appealing closed-form solution is derived, as a function of dual variables, for both transmit and receive beamformers. Finally, we use an iterative solution based on the sub-gradient method to solve for the mutually coupled and interdependent dual variables. The proposed solution does not rely on generic solvers and does not require any bisection loop for finding the achievable rate of various streams. As a result, it significantly outperforms the state-of-art in terms of computational cost and convergence speed.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
Channel Estimation and Data Detection Analysis of Massive MIMO with 1-Bit ADCs
Authors:
Italo Atzeni,
Antti Tölli
Abstract:
We present an analytical framework for the channel estimation and the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs) and i.i.d. Rayleigh fading. First, we provide closed-form expressions of the mean squared error (MSE) of the channel estimation considering the state-of-the-art linear minimum MSE estimator and the class of scal…
▽ More
We present an analytical framework for the channel estimation and the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs) and i.i.d. Rayleigh fading. First, we provide closed-form expressions of the mean squared error (MSE) of the channel estimation considering the state-of-the-art linear minimum MSE estimator and the class of scaled least-squares estimators. For the data detection, we provide closed-form expressions of the expected value and the variance of the estimated symbols when maximum ratio combining is adopted, which can be exploited to efficiently implement minimum distance detection and, potentially, to design the set of transmit symbols. Our analytical findings explicitly depend on key system parameters such as the signal-to-noise ratio (SNR), the number of user equipments, and the pilot length, thus enabling a precise characterization of the performance of the channel estimation and the data detection with 1-bit ADCs. The proposed analysis highlights a fundamental SNR trade-off, according to which operating at the right noise level significantly enhances the system performance.
△ Less
Submitted 16 November, 2021; v1 submitted 19 February, 2021;
originally announced February 2021.
-
Non-Symmetric Coded Caching for Location-Dependent Content Delivery
Authors:
Hamidreza Bakhshzad Mahmoodi,
MohammadJavad Salehi,
Antti Tölli
Abstract:
Immersive viewing is emerging as the next interface evolution for human-computer interaction. A truly wireless immersive application necessitates immense data delivery with ultra-low latency, raising stringent requirements for next-generation wireless networks. A potential solution for addressing these requirements is through the efficient usage of in-device storage and computation capabilities. T…
▽ More
Immersive viewing is emerging as the next interface evolution for human-computer interaction. A truly wireless immersive application necessitates immense data delivery with ultra-low latency, raising stringent requirements for next-generation wireless networks. A potential solution for addressing these requirements is through the efficient usage of in-device storage and computation capabilities. This paper proposes a novel location-based coded cache placement and delivery scheme, which leverages the nested code modulation (NCM) to enable multi-rate multicasting transmission. To provide a uniform quality of experience in different network locations, we formulate a linear programming cache allocation problem. Next, based on the users' spatial realizations, we adopt an NCM based coded delivery algorithm to efficiently serve a distinct group of users during each transmission. Numerical results demonstrate that the proposed location-based delivery method significantly increases transmission efficiency compared to state of the art.
△ Less
Submitted 13 April, 2021; v1 submitted 4 February, 2021;
originally announced February 2021.
-
Hybrid Beamforming for mm-Wave Massive MIMO Systems with Partially Connected RF Architecture
Authors:
Mohammad Majidzadeh,
Jarkko Kaleva,
Nuutti Tervo,
Harri Pennanen,
Antti Tolli,
Matti Latva-aho
Abstract:
To satisfy the capacity requirements of future mobile systems, under-utilized millimeter wave frequencies can be efficiently exploited by employing massive MIMO technology with highly directive beamforming. Hybrid analog-digital beamforming has been recognised as a promising approach for large-scale MIMO implementations with a reduced number of costly and power-hungry RF chains. In comparison to f…
▽ More
To satisfy the capacity requirements of future mobile systems, under-utilized millimeter wave frequencies can be efficiently exploited by employing massive MIMO technology with highly directive beamforming. Hybrid analog-digital beamforming has been recognised as a promising approach for large-scale MIMO implementations with a reduced number of costly and power-hungry RF chains. In comparison to fully connected architecture, hybrid beamforming (HBF) with partially connected RF architecture is particularly appealing for the practical implementation due to less complex RF power division and combining networks. In this paper, we first formulate single- and multi-user rate maximization problems as weighted minimum mean square error (WMMSE) and derive solutions for hybrid beamformers using alternating optimization. The algorithms are designed for the full-array- and sub-array-based processing strategies of partially connected HBF architecture. In addition to the rate maximizing WMMSE solutions, we propose lower complexity sub-array-based zero-forcing algorithms. The performance of the proposed algorithms is evaluated in two different channel models, i.e., a simple geometric model and a realistic statistical millimeter wave model known as NYUSIM. The performance results of the WMMSE HBF algorithms are meant to reveal the potential of partially connected HBF and serve as upper bounds for lower complexity methods. Numerical results imply that properly designed partially connected HBF has the potential to provide an good compromise between hardware complexity and system performance in comparison to fully digital beamforming.
△ Less
Submitted 4 December, 2020;
originally announced December 2020.
-
D2D Assisted Multi-antenna Coded Caching
Authors:
Hamidreza Bakhshzad Mahmoodi,
Jarkko Kaleva,
Seyed Pooya Shariatpanahi,
Antti Tolli
Abstract:
A device-to-device (D2D) aided multi-antenna coded caching scheme is proposed to improve the average delivery rate and reduce the downlink (DL) beamforming complexity.} Novel beamforming and resource allocation schemes are proposed where local data exchange among nearby users is exploited. The transmission is split into two phases: local D2D content exchange and DL transmission. In the D2D phase,…
▽ More
A device-to-device (D2D) aided multi-antenna coded caching scheme is proposed to improve the average delivery rate and reduce the downlink (DL) beamforming complexity.} Novel beamforming and resource allocation schemes are proposed where local data exchange among nearby users is exploited. The transmission is split into two phases: local D2D content exchange and DL transmission. In the D2D phase, subsets of users are selected to share content with the adjacent users directly. {In this regard, a low complexity D2D mode selection algorithm is proposed to find the appropriate set of users for the D2D phase with comparable performance to the optimal exhaustive search. {During} the DL phase, the base station multicasts the remaining data requested by all the users. We identify scenarios and conditions where D2D transmission can reduce the delivery time. Furthermore, we demonstrate how} adding the new D2D phase to the DL-only scenario can significantly reduce the beamformer design complexity in the DL phase. The results further highlight that by partly delivering requested data in the D2D phase, the transmission rate can be boosted due to more efficient use of resources during the subsequent DL phase. As a result, the overall content delivery performance is greatly enhanced, especially in the finite signal-to-noise (SNR) regime.
△ Less
Submitted 1 February, 2023; v1 submitted 9 October, 2020;
originally announced October 2020.
-
Low-Complexity High-Performance Cyclic Caching for Large MISO Systems
Authors:
MohammadJavad Salehi,
Emanuele Parrinello,
Seyed Pooya Shariatpanahi,
Petros Elia,
Antti Tölli
Abstract:
Multi-antenna coded caching is known to combine a global caching gain that is proportional to the cumulative cache size found across the network, with an additional spatial multiplexing gain that stems from using multiple transmitting antennas. However, a closer look reveals two severe bottlenecks; the well-known exponential subpacketization bottleneck that dramatically reduces performance when th…
▽ More
Multi-antenna coded caching is known to combine a global caching gain that is proportional to the cumulative cache size found across the network, with an additional spatial multiplexing gain that stems from using multiple transmitting antennas. However, a closer look reveals two severe bottlenecks; the well-known exponential subpacketization bottleneck that dramatically reduces performance when the communicated file sizes are finite, and the considerable optimization complexity of beamforming multicast messages when the SNR is finite. We here present an entirely novel caching scheme, termed \emph{cyclic multi-antenna coded caching}, whose unique structure allows for the resolution of the above bottlenecks in the crucial regime of many transmit antennas. For this regime, where the multiplexing gain can exceed the coding gain, our new algorithm is the first to achieve the exact one-shot linear optimal DoF with a subpacketization complexity that scales only linearly with the number of users, and the first to benefit from a multicasting structure that allows for exploiting uplink-downlink duality in order to yield optimized beamformers ultra-fast. In the end, our novel solution provides excellent performance for networks with finite SNR, finite file sizes, and many users.
△ Less
Submitted 11 October, 2021; v1 submitted 25 September, 2020;
originally announced September 2020.