-
Facile synthesis of palladium hydride via ionic gate-driven protonation using a deep eutectic solvent
Authors:
Gaia Gavello,
Giorgio Tofani,
Domenico De Fazio,
Stefania Lettieri,
Andrea Mezzetta,
Lorenzo Guazzelli,
Christian S. Pomelli,
Renato S. Gonnelli,
Erik Piatti,
Dario Daghero
Abstract:
Developing novel protocols for hydrogen (H) loading is crucial for furthering the investigation of hydrides as potential high-temperature superconductors at lower pressures compared to recent discoveries. Ionic gating-induced protonation (IGP) has emerged as a promising technique for H loading due to its inherent simplicity, but it can be limited in the maximum density of injected H when ionic liq…
▽ More
Developing novel protocols for hydrogen (H) loading is crucial for furthering the investigation of hydrides as potential high-temperature superconductors at lower pressures compared to recent discoveries. Ionic gating-induced protonation (IGP) has emerged as a promising technique for H loading due to its inherent simplicity, but it can be limited in the maximum density of injected H when ionic liquids are used as a gating medium. Additionally, most ionic liquids are limited by high production costs, complex synthesis, and potential toxicity. Here, we demonstrate that large H concentrations can be successfully injected in both palladium (Pd) bulk foils and thin films (up to a stoichiometry PdH$_{0.89}$) by using a deep eutectic solvent (DES) choline chloride-glycerol 1:3 as gate electrolyte and applying gate voltages in excess of the cathodic stability limit. The attained H concentrations are large enough to induce superconductivity in Pd, albeit with an incomplete resistive transition which suggests a strongly inhomogeneous H incorporation in the Pd matrix. This DES-based IGP protocol can be used as a guideline for maximizing H loading in different materials, although specific details of the applied voltage profile might require adjustments based on the material under investigation.
△ Less
Submitted 17 December, 2024; v1 submitted 20 October, 2024;
originally announced October 2024.
-
Optical grade bromide-based thin film electrolytes
Authors:
Nicola Melchioni,
Giacomo Trupiano,
Giorgio Tofani,
Riccardo Bertini,
Andrea Mezzetta,
Federica Bianco,
Lorenzo Guazzelli,
Fabio Beltram,
Christian Silvio Pomelli,
Stefano Roddaro,
Alessandro Tredicucci,
Federico Paolucci
Abstract:
Controlling the charge density in low-dimensional materials with an electrostatic potential is a powerful tool to explore and influence their electronic and optical properties. Conventional solid gates impose strict geometrical constraints to the devices and often absorb electromagnetic radiation in the infrared (IR) region. A powerful alternative is ionic liquid (IL) gating. This technique only n…
▽ More
Controlling the charge density in low-dimensional materials with an electrostatic potential is a powerful tool to explore and influence their electronic and optical properties. Conventional solid gates impose strict geometrical constraints to the devices and often absorb electromagnetic radiation in the infrared (IR) region. A powerful alternative is ionic liquid (IL) gating. This technique only needs a metallic electrode in contact with the IL and the highest achievable electric field is limited by the electrochemical interactions of the IL with the environment. Despite the excellent gating properties, a large number of ILs is hardly exploitable for optical experiments in the mid-IR region, because they typically suffer from low optical transparency and degradation in ambient conditions. Here, we report the realization of two electrolytes based on bromide ILs dissolved in polymethyl methacrylate (PMMA). We demonstrate that such electrolytes can induce state-of-the-art charge densities as high as $20\times10^{15}\ \mathrm{cm^{-2}}$. Thanks to the low water absorption of PMMA, they work both in vacuum and in ambient atmosphere after a simple vacuum curing. Furthermore, our electrolytes can be spin coated into flat thin films with optical transparency in the range from 600 cm$^{-1}$ to 4000 cm$^{-1}$. Thanks to these properties, the electrolytes are excellent candidates to fill the gap as versatile gating layers for electronic and mid-IR optoelectronic devices.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Planck Early Results. V. The Low Frequency Instrument data processing
Authors:
A. Zacchei,
D. Maino,
C. Baccigalupi,
M. Bersanelli,
A. Bonaldi,
L. Bonavera,
C. Burigana,
R. C. Butler,
F. Cuttaia,
G. de Zotti,
J. Dick,
M. Frailis,
S. Galeotta,
J. González-Nuevo,
K. M. Górski,
A. Gregorio,
E. Keihänen,
R. Keskitalo,
J. Knoche,
H. Kurki-Suonio,
C. R. Lawrence,
S. Leach,
J. P. Leahy,
M. López-Caniego,
N. Mandolesi
, et al. (124 additional authors not shown)
Abstract:
We describe the processing of data from the Low Frequency Instrument (LFI) used in production of the Planck Early Release Compact Source Catalogue (ERCSC). In particular, we discuss the steps involved in reducing the data from telemetry packets to cleaned, calibrated, time-ordered data (TOD) and frequency maps. Data are continuously calibrated using the modulation of the temperature of the cosmic…
▽ More
We describe the processing of data from the Low Frequency Instrument (LFI) used in production of the Planck Early Release Compact Source Catalogue (ERCSC). In particular, we discuss the steps involved in reducing the data from telemetry packets to cleaned, calibrated, time-ordered data (TOD) and frequency maps. Data are continuously calibrated using the modulation of the temperature of the cosmic microwave background radiation induced by the motion of the spacecraft. Noise properties are estimated from TOD from which the sky signal has been removed using a generalized least square map-making algorithm. Measured 1/f noise knee-frequencies range from 100mHz at 30GHz to a few tens of mHz at 70GHz. A destriping code (Madam) is employed to combine radiometric data and pointing information into sky maps, minimizing the variance of correlated noise. Noise covariance matrices required to compute statistical uncertainties on LFI and Planck products are also produced. Main beams are estimated down to the approx -10dB level using Jupiter transits, which are also used for geometrical calibration of the focal plane.
△ Less
Submitted 7 December, 2011; v1 submitted 11 January, 2011;
originally announced January 2011.
-
Planck early results. III. First assessment of the Low Frequency Instrument in-flight performance
Authors:
A. Mennella,
M. Bersanelli,
R. C. Butler,
A. Curto,
F. Cuttaia,
R. J. Davis,
J. Dick,
M. Frailis,
S. Galeotta,
A. Gregorio,
H. Kurki-Suonio,
C. R. Lawrence,
S. Leach,
J. P. Leahy,
S. Lowe,
D. Maino,
N. Mandolesi,
M. Maris,
E. Martínez-González,
P. R. Meinhold,
G. Morgante,
D. Pearson,
F. Perrotta,
G. Polenta,
T. Poutanen
, et al. (136 additional authors not shown)
Abstract:
The scientific performance of the Planck Low Frequency Instrument (LFI) after one year of in-orbit operation is presented. We describe the main optical parameters and discuss photometric calibration, white noise sensitivity, and noise properties. A preliminary evaluation of the impact of the main systematic effects is presented. For each of the performance parameters, we outline the methods used t…
▽ More
The scientific performance of the Planck Low Frequency Instrument (LFI) after one year of in-orbit operation is presented. We describe the main optical parameters and discuss photometric calibration, white noise sensitivity, and noise properties. A preliminary evaluation of the impact of the main systematic effects is presented. For each of the performance parameters, we outline the methods used to obtain them from the flight data and provide a comparison with pre-launch ground assessments, which are essentially confirmed in flight.
△ Less
Submitted 19 December, 2011; v1 submitted 11 January, 2011;
originally announced January 2011.
-
First results on Martian carbon monoxide from Herschel/HIFI observations
Authors:
P. Hartogh,
M. I. Błęcka,
C. Jarchow,
H. Sagawa,
E. Lellouch,
M. de Val-Borro,
M. Rengel,
A. S. Medvedev,
B. M. Swinyard,
R. Moreno,
T. Cavalié,
D. C. Lis,
M. Banaszkiewicz,
D. Bockelée-Morvan,
J. Crovisier,
T. Encrenaz,
M. Küppers,
L. -M. Lara,
S. Szutowicz,
B. Vandenbussche,
F. Bensch,
E. A. Bergin,
F. Billebaud,
N. Biver,
G. A. Blake
, et al. (26 additional authors not shown)
Abstract:
We report on the initial analysis of Herschel/HIFI carbon monoxide (CO) observations of the Martian atmosphere performed between 11 and 16 April 2010. We selected the (7-6) rotational transitions of the isotopes ^{13}CO at 771 GHz and C^{18}O at 768 GHz in order to retrieve the mean vertical profile of temperature and the mean volume mixing ratio of carbon monoxide. The derived temperature profile…
▽ More
We report on the initial analysis of Herschel/HIFI carbon monoxide (CO) observations of the Martian atmosphere performed between 11 and 16 April 2010. We selected the (7-6) rotational transitions of the isotopes ^{13}CO at 771 GHz and C^{18}O at 768 GHz in order to retrieve the mean vertical profile of temperature and the mean volume mixing ratio of carbon monoxide. The derived temperature profile agrees within less than 5 K with general circulation model (GCM) predictions up to an altitude of 45 km, however, show about 12-15 K lower values at 60 km. The CO mixing ratio was determined as 980 \pm 150 ppm, in agreement with the 900 ppm derived from Herschel/SPIRE observations in November 2009.
△ Less
Submitted 29 July, 2010; v1 submitted 8 July, 2010;
originally announced July 2010.
-
The Photodetector Array Camera and Spectrometer (PACS) on the Herschel Space Observatory
Authors:
A. Poglitsch,
C. Waelkens,
N. Geis,
H. Feuchtgruber,
B. Vandenbussche,
L. Rodriguez,
O. Krause,
E. Renotte,
C. van Hoof,
P. Saraceno,
J. Cepa,
F. Kerschbaum,
P. Agnese,
B. Ali,
B. Altieri,
P. Andreani,
J. -L. Augueres,
Z. Balog,
L. Barl,
O. H. Bauer,
N. Belbachir,
M. Benedettini,
N. Billot,
O. Boulade,
H. Bischof
, et al. (58 additional authors not shown)
Abstract:
The Photodetector Array Camera and Spectrometer (PACS) is one of the three science instruments on ESA's far infrared and submillimetre observatory. It employs two Ge:Ga photoconductor arrays (stressed and unstressed) with 16x25 pixels, each, and two filled silicon bolometer arrays with 16x32 and 32x64 pixels, respectively, to perform integral-field spectroscopy and imaging photometry in the 60-210…
▽ More
The Photodetector Array Camera and Spectrometer (PACS) is one of the three science instruments on ESA's far infrared and submillimetre observatory. It employs two Ge:Ga photoconductor arrays (stressed and unstressed) with 16x25 pixels, each, and two filled silicon bolometer arrays with 16x32 and 32x64 pixels, respectively, to perform integral-field spectroscopy and imaging photometry in the 60-210μ m wavelength regime. In photometry mode, it simultaneously images two bands, 60-85μ m or 85-125μ\m and 125-210μ m, over a field of view of ~1.75'x3.5', with close to Nyquist beam sampling in each band. In spectroscopy mode, it images a field of 47"x47", resolved into 5x5 pixels, with an instantaneous spectral coverage of ~1500km/s and a spectral resolution of ~175km/s. We summarise the design of the instrument, describe observing modes, calibration, and data analysis methods, and present our current assessment of the in-orbit performance of the instrument based on the Performance Verification tests. PACS is fully operational, and the achieved performance is close to or better than the pre-launch predictions.
△ Less
Submitted 20 May, 2010; v1 submitted 10 May, 2010;
originally announced May 2010.
-
EVN observations of 6.7 GHz methanol masers from Medicina survey
Authors:
M. A. Voronkov,
V. I. Slysh,
F. Palagi,
G. Tofani
Abstract:
We report VLBI observations of methanol masers in the brightest 5(1)-6(0) A+ transition at 6.7 GHz in NGC 281W, 18151-1208 and 19388+2357. Using the fringe rate method absolute positions were obtained for all observed sources. A linear ordered structure with a velocity gradient was revealed in NGC 281W. Under assumption that such structure is an edge-on Keplerian disk around the central object w…
▽ More
We report VLBI observations of methanol masers in the brightest 5(1)-6(0) A+ transition at 6.7 GHz in NGC 281W, 18151-1208 and 19388+2357. Using the fringe rate method absolute positions were obtained for all observed sources. A linear ordered structure with a velocity gradient was revealed in NGC 281W. Under assumption that such structure is an edge-on Keplerian disk around the central object with a mass of 30Msun located at a distance of 3.5 kpc from the Sun, we estimated that methanol masers are situated at the distance about 400 a.u. from the center of the disk. A second epoch of observations was reported for L1206, GL2789 and 20062+3550. The upper limits on the relative motions of maser spots are estimated to be 4.7 km/s and 28 km/s for L1206 and GL2789 respectively.
△ Less
Submitted 31 May, 2002;
originally announced May 2002.
-
A Multiwavelength Picture of the AFGL 5142 Star-forming Region
Authors:
Todd R. Hunter,
Leonardo Testi,
Greg B. Taylor,
Marcello Felli,
Gianni Tofani,
Thomas G. Phillips
Abstract:
We present molecular line, H2O maser, radio continuum and near infrared maps of the bipolar outflow source AFGL5142. The high resolution of our molecular CO observations enables us to define the morphology of the large-scale bipolar outflow into a two lobe structure extending for 2' on each side of the center. In the perpendicular direction, we find consistent evidence for a second, more compact…
▽ More
We present molecular line, H2O maser, radio continuum and near infrared maps of the bipolar outflow source AFGL5142. The high resolution of our molecular CO observations enables us to define the morphology of the large-scale bipolar outflow into a two lobe structure extending for 2' on each side of the center. In the perpendicular direction, we find consistent evidence for a second, more compact (<0.5') outflow in the form of a spatial velocity offset in the CO map and of an H2 jet-like structure derived from a near infrared narrow band image. On a smaller scale size, the radio and infrared continuum observations reveal the engines of the molecular outflows. The maser emission occurs near the position of the most embedded source of the cluster, IRS1. This is located at the center of the compact outflow and jets of shocked H2 and coincides with an ultra compact radio continuum source (most probably an ionized stellar wind). The H2O cluster is composed of five spatial components: two are within 0.3'' from the YSO (a few hundred AU) and three are at larger distance (1.5--2'', a few thousand AU). A marginal detection of proper motion of the two more distant masers may suggest a high expansion velocity at a distance 4000 AU from the YSO, similar to what is found in Orion KL and W49N. The brightest NIR source of the cluster (IRS2) is associated with an IRAS point source and lies along the axis of the large-scale bipolar outflow. We propose that the masers and the compact molecular outflow are powered concurrently by the wind from the YSO associated with IRS1, while the large-scale outflow could be the remnant from the formation of IRS2.
△ Less
Submitted 30 March, 1995;
originally announced March 1995.
