Showing 1–50 of 153 results for author: Thygesen, K

Predicting aqueous and electrochemical stability of 2D materials from extended Pourbaix analyses

Authors: Stefano Americo, Ivano E. Castelli, Kristian S. Thygesen

Abstract: A key challenge for computational discovery of electrocatalytic materials is the reliable prediction of thermodynamic stability in aqueous environment and under different electrochemical conditions. In this work, we first evaluate the electrochemical stability of more than 3000 two-dimensional (2D) materials using conventional Pourbaix diagrams (CPDs). Due to the complete neglect of thermodynamic… ▽ More A key challenge for computational discovery of electrocatalytic materials is the reliable prediction of thermodynamic stability in aqueous environment and under different electrochemical conditions. In this work, we first evaluate the electrochemical stability of more than 3000 two-dimensional (2D) materials using conventional Pourbaix diagrams (CPDs). Due to the complete neglect of thermodynamic barriers along the (often complex) reaction pathways, the vast majority of the materials are predicted to be unstable even though some are known to be stable in practice. We then introduce an analysis based on the surface Pourbaix diagram (SPD) including 'early intermediate states' that represent the first steps of the key surface passivation and dissolution reactions. The SPD framework is applied to the 2D materials MoS$_2$, phosphorene, and the MXene Ti$_2$C, all of which are predicted to be unstable by the CPD. For MoS$_2$, our approach reproduces the experimental pH-U stability window as well as the experimental desulphurization potential. For phosphorene and Ti2$_C$, the SPD approach is used to investigate the spontaneous degradation mechanism and the potential-dependent surface termination, respectively, again yielding good agreement with experiments. The SPD-based stability analysis emerges as a versatile and quantitative method for prediction of stability and investigation of surface structures in electrochemical environments. △ Less

Submitted 9 June, 2025; originally announced June 2025.

Comments: 15 pages, 5 figures, 1 table

Journal ref: ACS Electrochemistry 1.5 (2025): 718-729

Self-consistent layer-projected scissors operator for band structures of complex 2D van der Waals materials

Authors: Dario A. Leon, Mikael Kuisma, Mikkel Ohm Sauer, Jakob K. Svaneborg, Mark K. Svendsen, Stefano Americo, Kristian Berland, Jens Jørgen Mortensen, Kristian S. Thygesen

Abstract: We introduce a computationally efficient method to calculate the quasiparticle (QP) band structure of general van der Waals (vdW) heterostructures. A layer-projected scissors (LAPS) operator, which depends on the one-body density matrix, is added to the density functional theory (DFT) Hamiltonian. The LAPS operator corrects the band edges of the individual layers for self-energy effects (both intr… ▽ More We introduce a computationally efficient method to calculate the quasiparticle (QP) band structure of general van der Waals (vdW) heterostructures. A layer-projected scissors (LAPS) operator, which depends on the one-body density matrix, is added to the density functional theory (DFT) Hamiltonian. The LAPS operator corrects the band edges of the individual layers for self-energy effects (both intralayer and interlayer) and unphysical strain fields stemming from the use of model supercells. The LAPS operator is treated self-consistently whereby charge redistribution and interlayer hybridization occurring in response to the band energy corrections are properly accounted for. We present several examples illustrating both the qualitative and quantitative performance of the method, including MoS$_2$ films with up to 20 layers, bilayer MoS$_2$ in an electric field, lattice-matched MoS$_2$/WS$_2$ and MoSe$_2$/WSe$_2$ bilayers, and MoSe$_2$/WS$_2$ moiré structures. Our work opens the way for predictive modeling of electronic, optical, and topological properties of complex and experimentally relevant vdW materials. △ Less

Submitted 22 May, 2025; originally announced May 2025.

Accelerating point defect photo-emission calculations with machine learning interatomic potentials

Authors: Kartikeya Sharma, Antoine Loew, Haiyuan Wang, Fredrik A. Nilsson, Miguel A. L. Marques, Kristian S. Thygesen

Abstract: We introduce a computational framework leveraging universal machine learning interatomic potentials (MLIPs) to dramatically accelerate the calculation of photoluminescence (PL) spectra of atomic or molecular emitters with \emph{ab initio} accuracy. By replacing the costly density functional theory (DFT) computation of phonon modes with much faster MLIP phonon mode calculations, our approach achiev… ▽ More We introduce a computational framework leveraging universal machine learning interatomic potentials (MLIPs) to dramatically accelerate the calculation of photoluminescence (PL) spectra of atomic or molecular emitters with \emph{ab initio} accuracy. By replacing the costly density functional theory (DFT) computation of phonon modes with much faster MLIP phonon mode calculations, our approach achieves speed improvements exceeding an order of magnitude with minimal precision loss. We benchmark the approach using a dataset comprising \emph{ab initio} emission spectra of 791 color centers spanning various types of crystal point defects in different charge and magnetic states. The method is also applied to a molecular emitter adsorbed on a hexagonal boron nitride surface. Across all the systems, we find excellent agreement for both the Huang-Rhys factor and the PL lineshapes. This application of universal MLIPs bridges the gap between computational efficiency and spectroscopic fidelity, opening pathways to high-throughput screening of defect-engineered materials. Our work not only demonstrates accelerated calculation of PL spectra with DFT accuracy, but also makes such calculations tractable for more complex materials. △ Less

Submitted 2 May, 2025; originally announced May 2025.

Comments: 9 pages, 5 figures, 1 table

Dispersion-corrected Machine Learning Potentials for 2D van der Waals Materials

Authors: Mikkel Ohm Sauer, Peder Meisner Lyngby, Kristian Sommer Thygesen

Abstract: Machine-learned interatomic potentials (MLIPs) based on message passing neural networks hold promise to enable large-scale atomistic simulations of complex materials with ab initio accuracy. A number of MLIPs trained on energies and forces from density functional theory (DFT) calculations employing semi-local exchange-correlation (xc) functionals have recently been introduced. Here, we benchmark t… ▽ More Machine-learned interatomic potentials (MLIPs) based on message passing neural networks hold promise to enable large-scale atomistic simulations of complex materials with ab initio accuracy. A number of MLIPs trained on energies and forces from density functional theory (DFT) calculations employing semi-local exchange-correlation (xc) functionals have recently been introduced. Here, we benchmark the performance of six dispersion-corrected MLIPs on a dataset of van der Waals heterobilayers containing between 4 and 300 atoms in the moiré cell. Using various structure similarity metrics, we compare the relaxed heterostructures to the ground truth DFT results. With some notable exceptions, the model precisions are comparable to the uncertainty on the DFT results stemming from the choice of xc-functional. We further explore how the structural inaccuracies propagate to the electronic properties, and find excellent performance with average errors on band energies as low as 35 meV. Our results demonstrate that recent MLIPs after dispersion corrections are on par with DFT for general vdW heterostructures, and thus justify their application to complex and experimentally relevant 2D materials. △ Less

Submitted 8 April, 2025; originally announced April 2025.

Comments: 11 pages, 8 figures

Roadmap for Photonics with 2D Materials

Authors: F. Javier García de Abajo, D. N. Basov, Frank H. L. Koppens, Lorenzo Orsini, Matteo Ceccanti, Sebastián Castilla, Lorenzo Cavicchi, Marco Polini, P. A. D. Gonçalves, A. T. Costa, N. M. R. Peres, N. Asger Mortensen, Sathwik Bharadwaj, Zubin Jacob, P. J. Schuck, A. N. Pasupathy, Milan Delor, M. K. Liu, Aitor Mugarza, Pablo Merino, Marc G. Cuxart, Emigdio Chávez-Angel, Martin Svec, Luiz H. G. Tizei, Florian Dirnberger , et al. (123 additional authors not shown)

Abstract: Triggered by the development of exfoliation and the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals currently constitute a wide research field protruding in multiple directions in combinat… ▽ More Triggered by the development of exfoliation and the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals currently constitute a wide research field protruding in multiple directions in combination with layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary collection of those directions, where 2D materials contribute with polaritons of unique characteristics such as strong spatial confinement, large optical-field enhancement, long lifetimes, high sensitivity to external stimuli (e.g., electric and magnetic fields, heating, and strain), a broad spectral range from the far infrared to the ultraviolet, and hybridization with spin and momentum textures of electronic band structures. The explosion of photonics with 2D materials as a vibrant research area is producing breakthroughs, including the discovery and design of new materials and metasurfaces with unprecedented properties as well as applications in integrated photonics, light emission, optical sensing, and exciting prospects for applications in quantum information, and nanoscale thermal transport. This Roadmap summarizes the state of the art in the field, identifies challenges and opportunities, and discusses future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners. △ Less

Submitted 14 April, 2025; v1 submitted 6 April, 2025; originally announced April 2025.

Comments: 199 pages, 42 figures, 1154 references

The 2D Materials Roadmap

Authors: Wencai Ren, Peter Bøggild, Joan Redwing, Kostya Novoselov, Luzhao Sun, Yue Qi, Kaicheng Jia, Zhongfan Liu, Oliver Burton, Jack Alexander-Webber, Stephan Hofmann, Yang Cao, Yu Long, Quan-Hong Yang, Dan Li, Soo Ho Choi, Ki Kang Kim, Young Hee Lee, Mian Li, Qing Huang, Yury Gogotsi, Nicholas Clark, Amy Carl, Roman Gorbachev, Thomas Olsen , et al. (48 additional authors not shown)

Abstract: Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and developme… ▽ More Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and development, spanning synthesis, properties and commercial applications. We specifically present roadmaps for high impact 2D materials, including graphene and its derivatives, transition metal dichalcogenides, MXenes as well as their heterostructures and moiré systems. The discussions are organized into thematic sections covering emerging research areas (e.g., twisted electronics, moiré nano-optoelectronics, polaritronics, quantum photonics, and neuromorphic computing), breakthrough applications in key technologies (e.g., 2D transistors, energy storage, electrocatalysis, filtration and separation, thermal management, flexible electronics, sensing, electromagnetic interference shielding, and composites) and other important topics (computational discovery of novel materials, commercialization and standardization). This roadmap focuses on the current research landscape, future challenges and scientific and technological advances required to address, with the intent to provide useful references for promoting the development of 2D materials. △ Less

Submitted 28 April, 2025; v1 submitted 28 March, 2025; originally announced March 2025.

Comments: 97 pages, to be published in 2D Materials

Computational discovery of high-refractive-index van der Waals materials: The case of HfS$_2$

Authors: Xavier Zambrana-Puyalto, Mark Kamper Svendsen, Amalie H. Søndersted, Avishek Sarbajna, Joakim P. Sandberg, Albert L. Riber, Georgy Ermolaev, Tara Maria Boland, Gleb Tselikov, Valentyn S. Volkov, Kristian S. Thygesen, Søren Raza

Abstract: New high-refractive-index dielectric materials may enhance many optical technologies by enabling efficient manipulation of light in waveguides, metasurfaces, and nanoscale resonators. Van der Waals materials are particularly promising due to their excitonic response and strong in-plane polarizability. Here we combine ab initio calculations and experiments to discover new high-refractive-index mate… ▽ More New high-refractive-index dielectric materials may enhance many optical technologies by enabling efficient manipulation of light in waveguides, metasurfaces, and nanoscale resonators. Van der Waals materials are particularly promising due to their excitonic response and strong in-plane polarizability. Here we combine ab initio calculations and experiments to discover new high-refractive-index materials. Our screening highlights both known and new promising optical materials, including hafnium disulfide (HfS$_2$), which shows an in-plane refractive index above 3 and large anisotropy in the visible range. We confirm these theoretical predictions through ellipsometry measurements and investigate the photonic potential of HfS$_2$ by fabricating nanodisk resonators, observing optical Mie resonances in the visible spectrum. Over the course of seven days, we observe a structural change in HfS$_2$, which we show can be mitigated by storage in either argon-rich or humidity-reduced environments. This work provides a comparative overview of high-index van der Waals materials and showcases the potential of HfS$_2$ for photonic applications in the visible spectrum. △ Less

Submitted 13 February, 2025; originally announced February 2025.

Comments: 5 figures

Effect of Hubbard U corrections on the electronic and magnetic properties of 2D materials: A high-throughput study

Authors: Sahar Pakdel, Thomas Olsen, Kristian S. Thygesen

Abstract: We conduct a systematic investigation of the role of Hubbard U corrections in electronic structure calculations of two-dimensional (2D) materials containing 3d transition metals. Specifically, we use density functional theory (DFT) with the PBE and PBE+U approximations to calculate the crystal structure, band gaps, and magnetic parameters of 638 monolayers. Based on a comprehensive comparison to e… ▽ More We conduct a systematic investigation of the role of Hubbard U corrections in electronic structure calculations of two-dimensional (2D) materials containing 3d transition metals. Specifically, we use density functional theory (DFT) with the PBE and PBE+U approximations to calculate the crystal structure, band gaps, and magnetic parameters of 638 monolayers. Based on a comprehensive comparison to experiments we first establish that inclusion of the U correction worsens the accuracy for the lattice constant. Consequently, PBE structures are used for subsequent property evaluations. The band gaps show significant dependence on the U-parameter. In particular, for 134 (21%) of the materials the U parameter leads to a metal-insulator transition. For the magnetic materials we calculate the magnetic moment, magnetic exchange coupling, and magnetic anisotropy parameters. In contrast to the band gaps, the size of the magnetic moments shows only weak dependence on U. Both the exchange energies and magnetic anisotropy parameters are systematically reduced by the U correction. On this basis we conclude that the Hubbard U correction will lead to lower predicted Curie temperatures in 2D materials. All the calculated properties are available in the Computational 2D Materials Database (C2DB). △ Less

Submitted 16 November, 2024; originally announced November 2024.

Activating the Basal Plane of 2D Transition Metal Dichalcogenides via High-Entropy Alloying

Authors: Mohammad Amin Akhound, Karsten Wedel Jacobsen, Kristian Sommer Thygesen

Abstract: Two-dimensional (2D) materials, such as transition metal dichalcogenides (TMDCs) in the 2H or 1T crystal phases, are promising (electro)catalyst candidates due to their high surface to volume ratio and composition of low-cost, abundant elements. While the edges of elemental TMDC nanoparticles, such as MoS$_2$, can show significant catalytic activity, the basal plane of the pristine materials are n… ▽ More Two-dimensional (2D) materials, such as transition metal dichalcogenides (TMDCs) in the 2H or 1T crystal phases, are promising (electro)catalyst candidates due to their high surface to volume ratio and composition of low-cost, abundant elements. While the edges of elemental TMDC nanoparticles, such as MoS$_2$, can show significant catalytic activity, the basal plane of the pristine materials are notoriously inert, which limits their normalized activity. Here we show that high densities of catalytically active sites can be formed on the TMDC basal plane by alloying elements that prefer the 2H (1T) phase into a 1T (2H) structure. The global stability of the alloy, in particular whether it crystallizes in the 2H or 1T phase, can be controlled by ensuring a majority of elements preferring the target phase. We further show that the mixing entropy plays a decisive role for stabilizing the alloy implying that high-entropy alloying becomes essential. Our calculations point to a number of interesting non-precious hydrogen evolution catalysts, including (CrHfTaVZr)S$_2$ and (CrNbTiVZr)S$_2$ in the T-phase and (MoNbTaVTi)S$_2$ in the H-phase. Our work opens new directions for designing catalytic sites via high-entropy alloy stabilization of locally unstable structures. △ Less

Submitted 9 October, 2024; originally announced October 2024.

Two-dimensional materials as ideal substrates for molecular quantum emitters

Authors: Haiyuan Wang, Nicolas Stenger, Peder Lyngby, Mikael Kuisma, Jakob Schiøtz, Kristian Sommer Thygesen

Abstract: The generation and manipulation of non-classical states of light is central to quantum technologies. Color centers in insulators have been extensively studied for single-photon generation, but organic molecules immobilized on substrates have gained attention due to their superior scalability, large oscillator strengths, and tunable emission frequency. Here, we use first-principles calculations to… ▽ More The generation and manipulation of non-classical states of light is central to quantum technologies. Color centers in insulators have been extensively studied for single-photon generation, but organic molecules immobilized on substrates have gained attention due to their superior scalability, large oscillator strengths, and tunable emission frequency. Here, we use first-principles calculations to investigate the photoemission from organic molecules adsorbed on 2D materials. Focusing on terrylene on hexagonal boron nitride (hBN), we obtain zero phonon line (ZPL) energies and emission lineshapes in excellent agreement with experiments. Notably, antisite defects in hBN can immobilize the molecule without influencing its key emission features. We further show that the main effect of the 2D substrate is to introduce sharp sidebands near the ZPL as a fingerprint of hindered rotational, translational, or bending modes of the molecule. Our findings provide insight into how substrate interactions shape the optical properties of molecular systems for quantum applications. △ Less

Submitted 5 June, 2025; v1 submitted 3 October, 2024; originally announced October 2024.

Quadrupolar and dipolar excitons in symmetric trilayer heterostructures: Insights from first principles theory

Authors: Thorsten Deilmann, Kristian Sommer Thygesen

Abstract: Excitons in van der Waals heterostructures come in many different forms. In bilayer structures, the electron and hole may be localized on the same layer or they may be separated forming an interlayer exciton with a finite out-of-plane dipole moment. Using first principles calculations, we investigate the excitons in a symmetric WS$_2$/MoS$_2$/WS$_2$ heterostructure in the presence of a vertical el… ▽ More Excitons in van der Waals heterostructures come in many different forms. In bilayer structures, the electron and hole may be localized on the same layer or they may be separated forming an interlayer exciton with a finite out-of-plane dipole moment. Using first principles calculations, we investigate the excitons in a symmetric WS$_2$/MoS$_2$/WS$_2$ heterostructure in the presence of a vertical electric field. The excitons exhibit a quadratic Stark shift for low field strengths and a linear Stark shift for stronger fields. This behaviour is traced to the coupling of interlayer excitons with opposite dipole moments, which lead to the formation of quadrupolar excitons at small fields. The formation of quadrupolar excitons is determined by the relative size of the electric field-induced splitting of the dipolar excitons and the coupling between them given by the hole tunneling across the MoS$_2$ layer. For the inverted structure, MoS$_2$/WS$_2$/MoS$_2$, the dipolar excitons are coupled by electron tunneling across the WS$_2$ layer. Because this effect is much weaker, the resulting quadrupolar excitons are more fragile and break at a weaker electric field. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Room temperature quantum emitters in van der Waals α-MoO3

Authors: Jeonghan Lee, Haiyuan Wang, Keun-Yeol Park, Soonsang Huh, Donghan Kim, Mihyang Yu, Changyoung Kim, Kristian Sommer Thygesen, Jieun Lee

Abstract: Quantum emitters in solid-state materials are highly promising building blocks for quantum information processing and communication science. Recently, single-photon emission from van der Waals materials has been reported in transition metal dichalcogenides and hexagonal boron nitride, exhibiting the potential to realize photonic quantum technologies in two-dimensional materials. Here, we report th… ▽ More Quantum emitters in solid-state materials are highly promising building blocks for quantum information processing and communication science. Recently, single-photon emission from van der Waals materials has been reported in transition metal dichalcogenides and hexagonal boron nitride, exhibiting the potential to realize photonic quantum technologies in two-dimensional materials. Here, we report the generation of room temperature single-photon emission from exfoliated and thermally annealed single crystals of van der Waals α-MoO3. The second-order correlation function measurement displays a clear photon antibunching, while the luminescence intensity exceeds 0.4 Mcts/s and remains stable under laser excitation. The theoretical calculation suggests that an oxygen vacancy defect is a possible candidate for the observed emitters. Together with photostability and brightness, quantum emitters in α-MoO3 provide a new avenue to realize photon-based quantum information science in van der Waals materials. △ Less

Submitted 10 January, 2025; v1 submitted 14 March, 2024; originally announced March 2024.

Comments: 20 pages, 4 figures

Ab initio property characterisation of thousands of previously unknown 2D materials

Authors: Peder Lyngby, Kristian Sommer Thygesen

Abstract: We perform extensive density functional theory (DFT) calculations to determine the stability and elementary properties of 4249 previously unexplored monolayer crystals. The monolayers comprise the most stable subset (energy within 0.1 eV/atom of the convex hull) of a larger portfolio of two-dimensional (2D) materials recently discovered using a deep generative model and systematic lattice decorati… ▽ More We perform extensive density functional theory (DFT) calculations to determine the stability and elementary properties of 4249 previously unexplored monolayer crystals. The monolayers comprise the most stable subset (energy within 0.1 eV/atom of the convex hull) of a larger portfolio of two-dimensional (2D) materials recently discovered using a deep generative model and systematic lattice decoration schemes. The relaxed 2D structures are run through the basic property workflow of the Computational 2D Materials Database (C2DB) to evaluate the dynamical stability and obtain the stiffness tensor, piezoelectric tensor, deformation potentials, Born and Bader charges, electronic band structure, effective masses, plasma frequency, Fermi surface, projected density of states, magnetic moments, magnetic exchange couplings, magnetic anisotropy, topological indices, optical- and infrared polarisability. We provide statistical overviews of the property data and highlight a few specific examples of interesting materials. Our work exposes previously unknown parts of the 2D chemical space and provides a basis for the discovery of 2D materials with specific properties. All data is available in the C2DB. △ Less

Submitted 17 June, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Comments: 12 pages, 11 figures

Journal ref: 2D Mater. 11 035030 (2024)

Developments and applications of the OPTIMADE API for materials discovery, design, and data exchange

Authors: Matthew L. Evans, Johan Bergsma, Andrius Merkys, Casper W. Andersen, Oskar B. Andersson, Daniel Beltrán, Evgeny Blokhin, Tara M. Boland, Rubén Castañeda Balderas, Kamal Choudhary, Alberto Díaz Díaz, Rodrigo Domínguez García, Hagen Eckert, Kristjan Eimre, María Elena Fuentes Montero, Adam M. Krajewski, Jens Jørgen Mortensen, José Manuel Nápoles Duarte, Jacob Pietryga, Ji Qi, Felipe de Jesús Trejo Carrillo, Antanas Vaitkus, Jusong Yu, Adam Zettel, Pedro Baptista de Castro , et al. (34 additional authors not shown)

Abstract: The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 relea… ▽ More The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 release, and has underpinned multiple scientific studies. In this work, we highlight the latest features of the API format, accompanying software tools, and provide an update on the implementation of OPTIMADE in contributing materials databases. We end by providing several use cases that demonstrate the utility of the OPTIMADE API in materials research that continue to drive its ongoing development. △ Less

Submitted 5 April, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

Journal ref: Digital Discovery, 2024, 3, 1509-1533

Layer group classification of two-dimensional materials

Authors: Jingheng Fu, Mikael Kuisma, Ask Hjorth Larsen, Kohei Shinohara, Atsushi Togo, Kristian S. Thygesen

Abstract: The symmetry of a crystal structure with a three-dimensional (3D) lattice can be classified by one of the 230 space group types. For some types of crystals, e.g. crystalline films, surfaces, or planar interfaces, it is more appropriate to assume a 2D lattice. With this assumption, the structure can be classified by one of the 80 layer group types. We have implemented an algorithm to determine the… ▽ More The symmetry of a crystal structure with a three-dimensional (3D) lattice can be classified by one of the 230 space group types. For some types of crystals, e.g. crystalline films, surfaces, or planar interfaces, it is more appropriate to assume a 2D lattice. With this assumption, the structure can be classified by one of the 80 layer group types. We have implemented an algorithm to determine the layer group type of a 3D structure with a 2D lattice, and applied it to more than 15,000 monolayer structures in the Computational 2D Materials (C2DB) database. We compare the classification of monolayers by layer groups and space groups, respectively. The latter is defined as the space group of the 3D bulk structure obtained by repeating the monolayer periodically in the direction perpendicular to the 2D lattice (AA-stacking). By this correspondence, nine pairs of layer group types are mapped to the same space group type due to the inability of the space group to distinguish the in-plane and out-of-plane axes. In total 18% of the monolayers in the C2DB belong to one of these layer group pairs and are thus not properly classified by the space group type. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Journal ref: 2D Mater. 11 (2024) 035009

Accurate Dielectric Response of Solids: Combining the Bethe-Salpeter Equation with the Random Phase Approximation

Authors: Amalie H. Søndersted, Mikael Kuisma, Jakob K. Svaneborg, Mark Kamper Svendsen, Kristian S. Thygesen

Abstract: The Bethe-Salpeter equation (BSE) can provide an accurate description of low-energy optical spectra of insulating crystals - even when excitonic effects are important. However, due to high computational costs it is only possible to include a few bands in the BSE Hamiltonian. As a consequence, the dielectric screening given by the real part of the dielectric function can be significantly underestim… ▽ More The Bethe-Salpeter equation (BSE) can provide an accurate description of low-energy optical spectra of insulating crystals - even when excitonic effects are important. However, due to high computational costs it is only possible to include a few bands in the BSE Hamiltonian. As a consequence, the dielectric screening given by the real part of the dielectric function can be significantly underestimated by the BSE. Here we show that universally accurate optical response functions can be obtained by combining a four-point BSE-like equation for the irreducible polarisability with a two-point Dyson equation which includes the higher-lying transitions within the random phase approximation (RPA). The new method is referred to as BSE+. It has a computational cost comparable to the BSE but a much faster convergence with respect to the size of the electron-hole basis. We use the method to calculate refractive indices and electron energy loss spectra for a test set of semiconductors and insulators. In all cases the BSE+ yields excellent agreement with experimental data across a wide frequency range and outperforms both BSE and RPA. △ Less

Submitted 30 November, 2023; originally announced November 2023.

Comments: 6 pages, 4 figures

Enhancing metallicity and basal plane reactivity of 2D materials via self-intercalation

Authors: Stefano Americo, Sahar Pakdel, Kristian Sommer Thygesen

Abstract: Intercalation (ic) of metal atoms into the van der Waals (vdW) gap of layered materials constitutes a facile strategy to create new materials whose properties can be tuned via the concentration of the intercalated atoms. Here we perform systematic density functional theory calculations to explore various properties of an emergent class of crystalline 2D materials (ic-2D materials) comprising vdW h… ▽ More Intercalation (ic) of metal atoms into the van der Waals (vdW) gap of layered materials constitutes a facile strategy to create new materials whose properties can be tuned via the concentration of the intercalated atoms. Here we perform systematic density functional theory calculations to explore various properties of an emergent class of crystalline 2D materials (ic-2D materials) comprising vdW homobilayers with native metal atoms on a sublattice of intercalation sites. From an initial set of 1348 ic-2D materials, generated from 77 vdW homobilayers, we find 95 structures with good thermodynamic stability (formation energy within 200 meV/atom of the convex hull). A significant fraction of the semiconducting host materials are found to undergo an insulator to metal transition upon self-intercalation with only PdS$_2$, PdSe$_2$, and GeS$_2$ maintaining a finite electronic gap. In five cases, self-intercalation introduces magnetism. In general, self-intercalation is found to promote metallicity and enhance the chemical reactivity on the basal plane. Based on the calculated H binding energy we find that self-intercalated SnS$_2$ and Hf$_3$Te$_2$ are promising candidates for hydrogen evolution catalysis. All the stable ic-2D structures and their calculated properties can be explored in the open C2DB database. △ Less

Submitted 18 November, 2023; originally announced November 2023.

GPAW: An open Python package for electronic-structure calculations

Authors: Jens Jørgen Mortensen, Ask Hjorth Larsen, Mikael Kuisma, Aleksei V. Ivanov, Alireza Taghizadeh, Andrew Peterson, Anubhab Haldar, Asmus Ougaard Dohn, Christian Schäfer, Elvar Örn Jónsson, Eric D. Hermes, Fredrik Andreas Nilsson, Georg Kastlunger, Gianluca Levi, Hannes Jónsson, Hannu Häkkinen, Jakub Fojt, Jiban Kangsabanik, Joachim Sødequist, Jouko Lehtomäki, Julian Heske, Jussi Enkovaara, Kirsten Trøstrup Winther, Marcin Dulak, Marko M. Melander , et al. (22 additional authors not shown)

Abstract: We review the GPAW open-source Python package for electronic structure calculations. GPAW is based on the projector-augmented wave method and can solve the self-consistent density functional theory (DFT) equations using three different wave-function representations, namely real-space grids, plane waves, and numerical atomic orbitals. The three representations are complementary and mutually indepen… ▽ More We review the GPAW open-source Python package for electronic structure calculations. GPAW is based on the projector-augmented wave method and can solve the self-consistent density functional theory (DFT) equations using three different wave-function representations, namely real-space grids, plane waves, and numerical atomic orbitals. The three representations are complementary and mutually independent and can be connected by transformations via the real-space grid. This multi-basis feature renders GPAW highly versatile and unique among similar codes. By virtue of its modular structure, the GPAW code constitutes an ideal platform for implementation of new features and methodologies. Moreover, it is well integrated with the Atomic Simulation Environment (ASE) providing a flexible and dynamic user interface. In addition to ground-state DFT calculations, GPAW supports many-body GW band structures, optical excitations from the Bethe-Salpeter Equation (BSE), variational calculations of excited states in molecules and solids via direct optimization, and real-time propagation of the Kohn-Sham equations within time-dependent DFT. A range of more advanced methods to describe magnetic excitations and non-collinear magnetism in solids are also now available. In addition, GPAW can calculate non-linear optical tensors of solids, charged crystal point defects, and much more. Recently, support of GPU acceleration has been achieved with minor modifications of the GPAW code thanks to the CuPy library. We end the review with an outlook describing some future plans for GPAW. △ Less

Submitted 16 April, 2024; v1 submitted 23 October, 2023; originally announced October 2023.

Journal ref: Journal of Chemical Physics 160, 092503 (2024)

The electronic structure of intertwined kagome, honeycomb, and triangular sublattices of the intermetallics MCo$_2$Al$_9$

Authors: Chiara Bigi, Sahar Pakdel, Michał J. Winiarski, Pasquale Orgiani, Ivana Vobornik, Jun Fujii, Giorgio Rossi, Vincent Polewczyk, Phil D. C. King, Giancarlo Panaccione, Tomasz Klimczuk, Kristian Sommer Thygesen, Federico Mazzola

Abstract: Intermetallics are an important playground to stabilize a large variety of physical phenomena, arising from their complex crystal structure. The ease of their chemical tuneabilty makes them suitable platforms to realize targeted electronic properties starting from the symmetries hidden in their unit cell. Here, we investigate the family of the recently discovered intermetallics MCo$_2$Al$_9$ (M: S… ▽ More Intermetallics are an important playground to stabilize a large variety of physical phenomena, arising from their complex crystal structure. The ease of their chemical tuneabilty makes them suitable platforms to realize targeted electronic properties starting from the symmetries hidden in their unit cell. Here, we investigate the family of the recently discovered intermetallics MCo$_2$Al$_9$ (M: Sr, Ba) and we unveil their electronic structure for the first time. By using angle-resolved photoelectron spectroscopy and density functional theory calculations, we discover the existence of Dirac-like dispersions as ubiquitous features in this family, coming from the hidden kagome and honeycomb symmetries embedded in the unit cell. Finally, from calculations, we expect that the spin-orbit coupling is responsible for opening energy gaps in the electronic structure spectrum, which also affects the majority of the observed Dirac-like states. Our study constitutes the first experimental observation of the electronic structure of MCo$_2$Al$_9$ and proposes these systems as hosts of Dirac-like physics with intrinsic spin-orbit coupling. The latter effect suggests MCo$_2$Al$_9$ as a future platform for investigating the emergence of non-trivial topology. △ Less

Submitted 23 July, 2023; originally announced July 2023.

Journal ref: Phys. Rev. B 108, 075148 (2023)

Selenium and the role of defects for photovoltaic applications

Authors: Hadeel Moustafa, Jiban Kangsabanik, Fabian Bertoldo, Simone Manti, Kristian S. Thygesen, Karsten W. Jacobsen, Thomas Olsen

Abstract: We present first principles calculations of the electronic properties of trigonal selenium with emphasis on photovoltaic applications. The band gap and optical absorption spectrum of pristine selenium is calculated from many-body perturbation theory yielding excellent agreement with experiments. We then investigate the role of intrinsic as well as extrinsic defects and estimate the equilibrium con… ▽ More We present first principles calculations of the electronic properties of trigonal selenium with emphasis on photovoltaic applications. The band gap and optical absorption spectrum of pristine selenium is calculated from many-body perturbation theory yielding excellent agreement with experiments. We then investigate the role of intrinsic as well as extrinsic defects and estimate the equilibrium concentrations resulting from realistic synthesis conditions. The intrinsic defects are dominated by vacancies and we show that these do not result in significant non-radiative recombination. The charge balance remains dominated by vacancies when extrinsic defects are included, but these may give rise to sizable non-radiative recombination rates, which could severely limit the performance of selenium based solar cells. Our results thus imply that the pollution by external elements is a decisive factor for the photovoltaic efficiency, which will be of crucial importance when considering synthesis conditions for any type of device engineering. △ Less

Submitted 20 December, 2023; v1 submitted 8 June, 2023; originally announced June 2023.

Comments: 12 pages

Journal ref: Phys. Rev. Mater. 8, 015402 (2024)

High-throughput search for triplet point defects with narrow emission lines in 2D materials

Authors: A. Sajid, F. Nilsson, S. Manti, F. Bertoldo, J. J. Mortensen, K. S. Thygesen

Abstract: We employ a first-principles computational workflow to screen for optically accessible, high-spin point defects in wide band gap two-dimensional (2D) crystals. Starting from an initial set of 5388 point defects, comprising both intrinsic and extrinsic, single and double defects in ten previously synthesised 2D host materials, we identify 596 defects with a triplet ground state. For these defects,… ▽ More We employ a first-principles computational workflow to screen for optically accessible, high-spin point defects in wide band gap two-dimensional (2D) crystals. Starting from an initial set of 5388 point defects, comprising both intrinsic and extrinsic, single and double defects in ten previously synthesised 2D host materials, we identify 596 defects with a triplet ground state. For these defects, we calculate the defect formation energy, the hyperfine (HF) coupling, and the zero-field splitting (ZFS) tensors. For 39 triplet transitions exhibiting particularly low Huang-Rhys factors, we calculate the full photo-luminescence (PL) spectrum. Our approach reveals many new spin defects with narrow PL line shapes and emission frequencies covering a broad spectral range. Most of the defects are hosted in hexagonal BN, which we ascribe to its high stiffness, but some are also found in MgI2, MoS2, MgBr2 and CaI2. As specific examples, we propose the defects vSMoS0 and NiSMoS0 in MoS2 as interesting candidates with potential applications to magnetic field sensors and quantum information technology. All the data will be made available in the open access database QPOD. △ Less

Submitted 28 May, 2023; originally announced June 2023.

Ab initio calculations of quantum light-matter interactions in general electromagnetic environments

Authors: Mark Kamper Svendsen, Kristian Sommer Thygesen, Angel Rubio, Johannes Flick

Abstract: The emerging field of strongly coupled light-matter systems has drawn significant attention in recent years due to the prospect of altering physical and chemical properties of molecules and materials. Because this emerging field draws on ideas from both condensed-matter physics and quantum optics, it has attracted attention from theoreticians from both fields. While the former employ accurate desc… ▽ More The emerging field of strongly coupled light-matter systems has drawn significant attention in recent years due to the prospect of altering physical and chemical properties of molecules and materials. Because this emerging field draws on ideas from both condensed-matter physics and quantum optics, it has attracted attention from theoreticians from both fields. While the former employ accurate descriptions of the electronic structure of the matter the description of the electromagnetic environment is often oversimplified. Contrastingly, the latter often employs sophisticated descriptions of the electromagnetic environment, while using simple few-level approximations for the matter. Both approaches are problematic because the oversimplified descriptions of the electronic system are incapable of describing effects such as light-induced structural changes, while the oversimplified descriptions of the electromagnetic environments can lead to unphysical predictions because the light-matter interactions strengths are misrepresented. Here we overcome these shortcomings and present the first method which can quantitatively describe both the electronic system and general electromagnetic environments from first principles. We realize this by combining macroscopic QED (MQED) with Quantum Electrodynamical Density-functional Theory. To exemplify this approach, we consider an absorbing spherical cavity and study the impact of different parameters of both the environment and the electronic system on the transition from weak-to-strong coupling for different aromatic molecules. As part of this work, we also provide an easy-to-use tool to calculate the cavity coupling strengths for simple cavity setups. Our work is a step towards parameter-free ab initio calculations for strongly coupled quantum light-matter systems and will help bridge the gap between theoretical methods and experiments in the field. △ Less

Submitted 9 January, 2024; v1 submitted 3 May, 2023; originally announced May 2023.

Exciton Superfluidity in 2D Heterostructures from First Principles: The importance of material specific screening

Authors: Rune Højlund, Emil Grovn, Sahar Pakdel, Kristian S. Thygesen, Fredrik Nilsson

Abstract: Recent theoretical and experimental studies suggest that van der Waals heterostructures with n- and p-doped bilayers of transition metal dichalcogenides are promising facilitators of exciton superfluidity. Exciton superfluidity in such bilayer systems is often modelled by solving a mean-field gap equation defined for only the conduction and valence band of the electron and hole material respective… ▽ More Recent theoretical and experimental studies suggest that van der Waals heterostructures with n- and p-doped bilayers of transition metal dichalcogenides are promising facilitators of exciton superfluidity. Exciton superfluidity in such bilayer systems is often modelled by solving a mean-field gap equation defined for only the conduction and valence band of the electron and hole material respectively. A key quantity entering the gap equation is the effective Coulomb potential acting as the bare interaction in the subspace of the model. Since the model only includes a few bands around the Fermi energy the effective model interaction is partially screened. Although the screening is a material dependent quantity it has in previous works been accounted for in an ad hoc manner, by assuming a static dielectric constant of 2 for a wide range of different materials. In this work we show that the effective model interaction can be derived from first principles using open source code frameworks. Using this novel ab initio downfolding procedure we show that the material dependent screening is essential to predict both magnitude and trends of exciton binding energies and superfluid properties. Furthermore, we suggest new material platforms of both transition metal oxides and dichalcogenides with superior properties compared to the standard devices with two transition metal dichalcogenide layers. △ Less

Submitted 9 August, 2023; v1 submitted 16 April, 2023; originally announced April 2023.

Comments: 16 pages, 8 figures

Emergent properties of van der Waals bilayers revealed by computational stacking

Authors: Sahar Pakdel, Asbjørn Rasmussen, Alireza Taghizadeh, Mads Kruse, Thomas Olsen, Kristian S. Thygesen

Abstract: Stacking of two-dimensional (2D) materials has emerged as a facile strategy for realising exotic quantum states of matter and engineering electronic properties. Yet, developments beyond the proof-of-principle level are impeded by the vast size of the configuration space defined by layer combinations and stacking orders. Here we employ a density functional theory (DFT) workflow to calculate interla… ▽ More Stacking of two-dimensional (2D) materials has emerged as a facile strategy for realising exotic quantum states of matter and engineering electronic properties. Yet, developments beyond the proof-of-principle level are impeded by the vast size of the configuration space defined by layer combinations and stacking orders. Here we employ a density functional theory (DFT) workflow to calculate interlayer binding energies of 8451 homobilayers created by stacking 1052 different monolayers in various configurations. Analysis of the stacking orders in 247 experimentally known van der Waals crystals is used to validate the workflow and determine the criteria for realizable bilayers. For the 2586 most stable bilayer systems, we calculate a range of electronic, magnetic, and vibrational properties, and explore general trends and anomalies. We identify an abundance of bistable bilayers with stacking order-dependent magnetic or electrical polarisation states making them candidates for slidetronics applications. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Journal ref: Nat Commun 15, 932 (2024)

A High-Performance Quasi-1D MoS$_2$ Nanoribbon Photodetector

Authors: Ganesh Ghimire, Rajesh Kumar Ulaganathan, Agnes Tempez, Oleksii Ilchenko, Raymond R. Unocic, Julian Heske, Denys I. Miakota, Cheng Xiang, Marc Chaigneau, Tim Booth, Peter Bøggild, Kristian S. Thygesen, David B. Geohegan, Stela Canulescu

Abstract: Molybdenum disulfide (MoS$_2$) nanoribbons have attracted increased interest due to their properties which can be tailored by tuning their dimensions. Herein, we demonstrate the growth of highly crystalline quasi-one-dimensional (1D)MoS$_2$ nanoribbons and aligned 3D triangular crystals with predominantly 3R or 2H stacking orientation. The synthesis method relies on the reaction between an ultra-t… ▽ More Molybdenum disulfide (MoS$_2$) nanoribbons have attracted increased interest due to their properties which can be tailored by tuning their dimensions. Herein, we demonstrate the growth of highly crystalline quasi-one-dimensional (1D)MoS$_2$ nanoribbons and aligned 3D triangular crystals with predominantly 3R or 2H stacking orientation. The synthesis method relies on the reaction between an ultra-thin MoO3-x film grown by Pulsed Laser Deposition (PLD) and NaF in a sulfur-rich environment. The quasi-1D MoS$_2$ nanoribbons can reach several micrometres in length, and feature single-layer (1L) edges aligned with the nanoribbon core, thereby forming a 1L-multilayer (ML) homojunction due to abrupt discontinuity in thickness. The 1L edges of the nanostructures show a pronounced second harmonic generation (SHG) due to the symmetry breaking, in contrast to the centrosymmetric ML structure, which is unsusceptible to the second-order nonlinear process. A pronounced splitting of the Raman spectra was observed in quasi-1D MoS$_2$ nanoribbons arising from distinct contributions from the 2D edges and a multilayer core. Nanoscale imaging reveals the blue-shifted exciton emission of the monolayer nanoribbon compared to the triangular MoS$_2$ counterpart due to built-in local strain and disorder. We further report on a versatile and ultrasensitive photodetector made of a single quasi-1D MoS$_2$ nanoribbon with a maximum responsivity of 872 A/W at the wavelength of 532 nm. The optoelectronic performance of the MoS$_2$ nanoribbon is superior to the previously reported single-nanoribbon photodetectors. Our findings can inspire the design of TMD semiconductors with tunable geometries for efficient optoelectronic devices. △ Less

Submitted 2 April, 2023; originally announced April 2023.

Comments: 45 pages, 18 figures

Excitonic insulators and superfluidity in 2D bilayers without external fields

Authors: Fredrik Nilsson, Mikael Kuisma, Sahar Pakdel, Kristian S. Thygesen

Abstract: We explore a new platform for realising excitonic insulators, namely van der Waals (vdW) bilayers comprising 2D Janus materials. In previous studies, Type-II heterobilayers have been brought to the excitonic insulating regime by tuning the band alignment using external gates. In contrast, the Janus bilayers of the current work represent intrinsic excitonic insulators. We first conduct ab initio ca… ▽ More We explore a new platform for realising excitonic insulators, namely van der Waals (vdW) bilayers comprising 2D Janus materials. In previous studies, Type-II heterobilayers have been brought to the excitonic insulating regime by tuning the band alignment using external gates. In contrast, the Janus bilayers of the current work represent intrinsic excitonic insulators. We first conduct ab initio calculations to obtain the quasiparticle band structures, screened Coulomb interaction, and interlayer exciton binding energies of the bilayers. These ab initio-derived quantities are then used to construct a BCS-like Hamiltonian of the exciton condensate. By solving the mean-field gap equation, we identify 16 vdW Janus bilayers with insulating ground states and superfluid properties. Our calculations expose a new class of advanced materials that are likely to exhibit novel excitonic phases at low temperatures, and highlight the subtle competition between interlayer hybridization, spin-orbit coupling, and dielectric screening that govern their properties. △ Less

Submitted 9 August, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 5 figures, 10 pages

Properties of quantum emitters in different hBN sample types particularly suited for nanophotonic integration

Authors: Ambika Shorny, Hardy Schauffert, James C. Stewart, Sajid Ali, Stefan Walser, Helmut Hörner, Adarsh S. Prasad, Vitaly Babenko, Ye Fan, Dominik Eder, Kristian S. Thygesen, Stephan Hofmann, Bernhard C. Bayer, Sarah M. Skoff

Abstract: Single photon emitters in two-dimensional (2D) hexagonal boron nitride (hBN) are promising solid-state quantum emitters for photonic applications and quantum networks. Despite their favorable properties, much is still unknown about their characteristics and their atomic origin. We focus on two different kinds of hBN samples that particularly lend themselves for integration with nanophotonic device… ▽ More Single photon emitters in two-dimensional (2D) hexagonal boron nitride (hBN) are promising solid-state quantum emitters for photonic applications and quantum networks. Despite their favorable properties, much is still unknown about their characteristics and their atomic origin. We focus on two different kinds of hBN samples that particularly lend themselves for integration with nanophotonic devices, multilayer nanoflakes produced by liquid phase exfoliation (LPE) and a layer-engineered sample from hBN grown by chemical vapour deposition (CVD). We investigate their inherent defects and fit their emission properties to computationally simulated optical properties of likely carbon-related defects. Thereby we compare and elucidate the properties in different sample types particularly suited for photonic quantum networks and narrow down the origin of emitters found in these samples. Our work is thus an important step towards harnessing the full potential of single photon emitters in hBN. △ Less

Submitted 19 February, 2025; v1 submitted 20 October, 2022; originally announced October 2022.

Hundreds of new, stable, one-dimensional materials from a generative machine learning model

Authors: Hadeel Moustafa, Peder Meisner Lyngby, Jens Jørgen Mortensen, Kristian S. Thygesen, Karsten W. Jacobsen

Abstract: We use a generative neural network model to create thousands of new, one-dimensional materials. The model is trained using 508 stable one-dimensional materials from the Computational 1D Materials Database (C1DB) database. More than 500 of the new materials are shown with density functional theory calculations to be dynamically stable and with heats of formation within 0.2 eV of the convex hull of… ▽ More We use a generative neural network model to create thousands of new, one-dimensional materials. The model is trained using 508 stable one-dimensional materials from the Computational 1D Materials Database (C1DB) database. More than 500 of the new materials are shown with density functional theory calculations to be dynamically stable and with heats of formation within 0.2 eV of the convex hull of known materials. Some of the new materials could also have been obtained by chemical element substitution in the training materials, but completely new classes of materials are also produced. The band structures, electronic densities of states, work functions, effective masses, and phonon spectra of the new materials are calculated, and the data are added to C1DB. △ Less

Submitted 17 October, 2022; originally announced October 2022.

Comments: 10 pages, 11 figures

Two-dimensional ferroelectrics from high throughput computational screening

Authors: Mads Kruse, Urko Petralanda, Morten N. Gjerding, Karsten W. Jacobsen, Kristian S. Thygesen, Thomas Olsen

Abstract: We report a high throughput computational search for two-dimensional ferroelectric materials. The starting point is 252 pyroelectric materials from the computational 2D materials database (C2DB) and from these we identify 64 ferroelectric materials by explicitly constructing adiabatic paths connecting states of reversed polarization. In particular we find 49 materials with in-plane polarization, 8… ▽ More We report a high throughput computational search for two-dimensional ferroelectric materials. The starting point is 252 pyroelectric materials from the computational 2D materials database (C2DB) and from these we identify 64 ferroelectric materials by explicitly constructing adiabatic paths connecting states of reversed polarization. In particular we find 49 materials with in-plane polarization, 8 materials with out-of-plane polarization and 6 materials with coupled in-plane and out-of-plane polarization. Most of the known 2D ferroelectrics are recovered by the screening and the far majority of the new predicted ferroelectrics are known as bulk van der Waals bonded compounds, which implies that these could be experimentally accessible by direct exfoliation. For roughly 25{\%} of the materials we find a metastable state in the non-polar structure, which could have important consequences for the thermodynamical properties and may imply a first order transition to the polar phase. Finally, we list the magnetic pyroelectrics extracted from the C2DB and focus on the case of VAgP$_2$Se$_6$, which exhibits a three-state switchable polarization vector that is strongly coupled to the magnetic excitation spectrum. △ Less

Submitted 28 September, 2022; originally announced September 2022.

Comments: 14 pages, 8 figures

Journal ref: npj Comput Mater 9, 45 (2023)

Combining experiments on luminescent centres in hexagonal boron nitride with the polaron model and ab initio methods towards the identification of their microscopic origin

Authors: Moritz Fischer, Ali Sajid, Jake Iles-Smith, Alexander Hötger, Denys I. Miakota, Mark. K. Svendsen, Christoph Kastl, Stela Canulescu, Sanshui Xiao, Martijn Wubs, Kristian S. Thygesen, Alexander W. Holleitner, Nicolas Stenger

Abstract: The two-dimensional material hexagonal boron nitride (hBN) hosts luminescent centres with emission energies of 2 eV which exhibit pronounced phonon sidebands. We investigate the microscopic origin of these luminescent centres by combining ab initio calculations with non-perturbative open quantum system theory to study the emission and absorption properties of 26 defect transitions. Comparing the c… ▽ More The two-dimensional material hexagonal boron nitride (hBN) hosts luminescent centres with emission energies of 2 eV which exhibit pronounced phonon sidebands. We investigate the microscopic origin of these luminescent centres by combining ab initio calculations with non-perturbative open quantum system theory to study the emission and absorption properties of 26 defect transitions. Comparing the calculated line shapes with experiments we narrow down the microscopic origin to three carbon-based defects: $\mathrm{C_2C_B}$, $\mathrm{C_2C_N}$, and $\mathrm{V_NC_B}$. The theoretical method developed enables us to calculate so-called photoluminescence excitation (PLE) maps, which show excellent agreement with our experiments. The latter resolves higher-order phonon transitions, thereby confirming both the vibronic structure of the optical transition and the phonon-assisted excitation mechanism with a phonon energy 170 meV. We believe that the presented experiments and polaron-based method accurately describe luminescent centres in hBN and will help to identify their microscopic origin. △ Less

Submitted 3 April, 2023; v1 submitted 19 September, 2022; originally announced September 2022.

Signatures of Non-Markovianity in Cavity-QED with Color Centers in 2D Materials

Authors: Mark Kamper Svendsen, Sajid Ali, Nicolas Stenger, Kristian Sommer Thygesen, Jake Iles-Smith

Abstract: Light-matter interactions of defects in two dimensional materials are expected to be profoundly impacted by strong coupling to phonons. In this work, we combine ab initio calculations of a defect in hBN, with a fully quantum mechanical and numerically exact description of a cavity-defect system to elucidate this impact. We show that even at weak light-matter coupling, the dynamical evolution of th… ▽ More Light-matter interactions of defects in two dimensional materials are expected to be profoundly impacted by strong coupling to phonons. In this work, we combine ab initio calculations of a defect in hBN, with a fully quantum mechanical and numerically exact description of a cavity-defect system to elucidate this impact. We show that even at weak light-matter coupling, the dynamical evolution of the cavity-defect system has clear signatures of non-markovian phonon effects, and that linear absorption spectra show the emergence of hybridised light-matter-phonon states in regimes of strong light-matter coupling. We emphasise that our methodology is general, and can be applied to a wide variety of material/defect systems. △ Less

Submitted 22 July, 2022; v1 submitted 21 July, 2022; originally announced July 2022.

Comments: 7 pages, 3 figures + 8 pages supplement

Journal ref: Phys. Rev. Research 5, L032037 (2023)

Indirect band gap semiconductors for thin-film photovoltaics: High-throughput calculation of phonon-assisted absorption

Authors: Jiban Kangsabanik, Mark Kamper Svendsen, Alireza Taghizadeh, Andrea Crovetto, Kristian S. Thygesen

Abstract: Discovery of high-performance materials remains one of the most active areas in photovoltaics (PV) research. Indirect band gap materials form the largest part of the semiconductor chemical space, but predicting their suitability for PV applications from first principles calculations remains challenging. Here we propose a computationally efficient method to account for phonon assisted absorption ac… ▽ More Discovery of high-performance materials remains one of the most active areas in photovoltaics (PV) research. Indirect band gap materials form the largest part of the semiconductor chemical space, but predicting their suitability for PV applications from first principles calculations remains challenging. Here we propose a computationally efficient method to account for phonon assisted absorption across the indirect band gap and use it to screen 127 experimentally known binary semiconductors for their potential as thin film PV absorbers. Using screening descriptors for absorption, carrier transport, and nonradiative recombination, we identify 28 potential candidate materials. The list, which contains 20 indirect band gap semiconductors, comprises both well established (3), emerging (16), and previously unexplored (9) absorber materials. Most of the new compounds are anion rich chalcogenides (TiS$_3$, Ga$_2$Te$_5$) and phosphides (PdP$_2$, CdP$_4$, MgP$_4$, BaP$_3$) containing homoelemental bonds, and represent a new frontier in PV materials research. Our work highlights the previously underexplored potential of indirect band gap materials for optoelectronic thin-film technologies. △ Less

Submitted 19 July, 2022; originally announced July 2022.

Journal ref: J. Am. Chem. Soc. 2022

Absorption $\textit{versus}$ Adsorption: High-Throughput Computation of Impurities in 2D Materials

Authors: Joel Davidsson, Fabian Bertoldo, Kristian S. Thygesen, Rickard Armiento

Abstract: Doping of a two-dimensional (2D) material by impurity atoms occurs \textit{via} two distinct mechanisms: absorption of the dopants by the 2D crystal or adsorption on its surface. To distinguish the relevant mechanism, we systematically dope 53 experimentally synthesized 2D monolayers by 65 different chemical elements in both absorption and adsorption sites. The resulting 17,598 doped monolayer str… ▽ More Doping of a two-dimensional (2D) material by impurity atoms occurs \textit{via} two distinct mechanisms: absorption of the dopants by the 2D crystal or adsorption on its surface. To distinguish the relevant mechanism, we systematically dope 53 experimentally synthesized 2D monolayers by 65 different chemical elements in both absorption and adsorption sites. The resulting 17,598 doped monolayer structures were generated using the newly developed ASE \texttt{DefectBuilder} -- a Python tool to set up point defects in 2D and bulk materials -- and subsequently relaxed by an automated high-throughput density functional theory (DFT) workflow. We find that interstitial positions are preferred for small dopants with partially filled valence electrons in host materials with large lattice parameters. On the contrary, adatoms are favored for dopants with a low number of valence electrons due to lower coordination of adsorption sites compared to interstitials. The relaxed structures, characterization parameters, defect formation energies, and magnetic moments (spins) are available in an open database to help advance our understanding of defects in 2D materials. △ Less

Submitted 3 April, 2023; v1 submitted 12 July, 2022; originally announced July 2022.

Comments: Joel Davidsson and Fabian Bertoldo contributed equally

Journal ref: npj 2D Materials and Applications, 7, 26 (2023)

Data-driven discovery of novel 2D materials by deep generative models

Authors: Peder Lyngby, Kristian Sommer Thygesen

Abstract: Efficient algorithms to generate candidate crystal structures with good stability properties can play a key role in data-driven materials discovery. Here we show that a crystal diffusion variational autoencoder (CDVAE) is capable of generating two-dimensional (2D) materials of high chemical and structural diversity and formation energies mirroring the training structures. Specifically, we train th… ▽ More Efficient algorithms to generate candidate crystal structures with good stability properties can play a key role in data-driven materials discovery. Here we show that a crystal diffusion variational autoencoder (CDVAE) is capable of generating two-dimensional (2D) materials of high chemical and structural diversity and formation energies mirroring the training structures. Specifically, we train the CDVAE on 2615 2D materials with energy above the convex hull $ΔH_{\mathrm{hull}}< 0.3$ eV/atom, and generate 5003 materials that we relax using density functional theory (DFT). We also generate 14192 new crystals by systematic element substitution of the training structures. We find that the generative model and lattice decoration approach are complementary and yield materials with similar stability properties but very different crystal structures and chemical compositions. In total we find 11630 predicted new 2D materials, where 8599 of these have $ΔH_{\mathrm{hull}}< 0.3$ eV/atom as the seed structures, while 2004 are within 50 meV of the convex hull and could potentially be synthesized. The relaxed atomic structures of all the materials are available in the open Computational 2D Materials Database (C2DB). Our work establishes the CDVAE as an efficient and reliable crystal generation machine, and significantly expands the space of 2D materials. △ Less

Submitted 24 June, 2022; originally announced June 2022.

Journal ref: npj Comput Mater 8, 232 (2022)

Spin coherence times of point defects in two-dimensional materials from first principles

Authors: A. Sajid, Kristian S. Thygesen

Abstract: The spin coherence times of 69 triplet defect centers in 45 different 2D host materials are calculated using the cluster correlation expansion (CCE) method with parameters of the spin Hamiltonian obtained from density functional theory (DFT). Several of the triplets are found to exhibit extraordinarily large spin coherence times making them interesting for quantum information processing. The depen… ▽ More The spin coherence times of 69 triplet defect centers in 45 different 2D host materials are calculated using the cluster correlation expansion (CCE) method with parameters of the spin Hamiltonian obtained from density functional theory (DFT). Several of the triplets are found to exhibit extraordinarily large spin coherence times making them interesting for quantum information processing. The dependence of the spin coherence time on various factors, including the hyperfine coupling strength, the dipole-dipole coupling, and the nuclear g-factors, are systematically investigated. The analysis shows that the spin coherence time is insensitive to the atomistic details of the defect center and rather is dictated by the nuclear spin properties of the host material. Symbolic regression is then used to derive a simple expression for spin coherence time, which is validated on a test set of 55 doublet defects unseen by the regression model. The simple expression permits order-of-magnitude estimates of the spin coherence time without expensive first principles calculations. △ Less

Submitted 8 September, 2022; v1 submitted 8 May, 2022; originally announced May 2022.

$WSe_2$ as transparent top gate for near-field experiments

Authors: Niels C. H. Hesp, Mark Kamper Svendsen, Kenji Watanabe, Takashi Taniguchi, Kristian Sommer Thygesen, Iacopo Torre, Frank H. L. Koppens

Abstract: Independent control of carrier density and out-of-plane displacement field is essential for accessing novel phenomena in two-dimensional material heterostructures. While this is achieved with independent top and bottom metallic gate electrodes in transport experiments, it remains a challenge for near-field optical studies as the top electrode interferes with the optical path. Here, we systematical… ▽ More Independent control of carrier density and out-of-plane displacement field is essential for accessing novel phenomena in two-dimensional material heterostructures. While this is achieved with independent top and bottom metallic gate electrodes in transport experiments, it remains a challenge for near-field optical studies as the top electrode interferes with the optical path. Here, we systematically characterize the requirements for a material to be used as top-gate electrode, and demonstrate experimentally that few-layer WSe_2 can be used as a transparent, ambipolar top gate electrode in infrared near-field microscopy. We perform nano-imaging of plasmons in a bilayer graphene heterostructure and tune the plasmon wavelength using a trilayer WSe_2 gate, achieving a density modulation amplitude exceeding 2 10^{12} cm^{-2}. Moreover, the observed ambipolar gate-voltage response allows to extract the energy gap of WSe_2 yielding a value of 1.05 eV. Our results will provide an additional tuning knob to cryogenic near-field experiments on emerging phenomena in two-dimensional materials and moiré material heterostructures. △ Less

Submitted 25 April, 2022; originally announced April 2022.

Computational exfoliation of atomically thin 1D materials with application to Majorana bound states

Authors: Hadeel Moustafa, Peter Mahler Larsen, Morten N. Gjerding, Jens Jørgen Mortensen, Kristian S. Thygesen, Karsten W. Jacobsen

Abstract: We introduce a computational database with calculated structural, thermodynamic, electronic, magnetic, and optical properties of 820 one-dimensional materials. The materials are systematically selected and exfoliated from experimental databases of crystal structures based on a dimensionality scoring parameter. The database is furthermore expanded by chemical element substitution in the materials.… ▽ More We introduce a computational database with calculated structural, thermodynamic, electronic, magnetic, and optical properties of 820 one-dimensional materials. The materials are systematically selected and exfoliated from experimental databases of crystal structures based on a dimensionality scoring parameter. The database is furthermore expanded by chemical element substitution in the materials. The materials are investigated in both their bulk form and as isolated one-dimensional components. We discuss the methodology behind the database, give an overview of some of the calculated properties, and look at patterns and correlations in the data. The database is furthermore applied in computational screening to identify materials, which could exhibit Majorana bound states. △ Less

Submitted 1 April, 2022; originally announced April 2022.

Comments: 17 pages, 20 figures

Momentum-dependent oscillator strength crossover of excitons and plasmons in two-dimensional PtSe2

Authors: Jinhua Hong, Mark Kamper Svendsen, Masanori Koshino, Thomas Pichler, Hua Xu, Kazu Suenaga, Kristian Sommer Thygesen

Abstract: The 1T-phase layered PtX2 chalcogenides has attracted widespread interest due to its thickness dependent metal-semiconductor transition driven by strong interlayer coupling. While the ground state properties of this paradigmatic material system have been widely explored, its fundamental excitation spectrum remains poorly understood. Here we combine first principles calculations with momentum (q) r… ▽ More The 1T-phase layered PtX2 chalcogenides has attracted widespread interest due to its thickness dependent metal-semiconductor transition driven by strong interlayer coupling. While the ground state properties of this paradigmatic material system have been widely explored, its fundamental excitation spectrum remains poorly understood. Here we combine first principles calculations with momentum (q) resolved electron energy loss spectroscopy (q-EELS) to study the collective excitations in 1T-PtSe2 from the monolayer limit to the bulk. At finite momentum transfer all the spectra are dominated by two distinct interband plasmons that disperse to higher energy with increasing q. Interestingly, the absence of long-range screening in the two-dimensional (2D) limit, inhibits the formation of long wavelength plasmons. Consequently, in the small-q limit, excitations in monolayer PtSe2 are exclusively of excitonic nature, and the loss spectrum coincides with the optical spectrum. Our work unravels the excited state spectrum of layered 1T-PtSe2 and establishes the qualitatively different momentum dependence of excitons and plasmons in 2D materials. △ Less

Submitted 9 March, 2022; originally announced March 2022.

Exploring and machine learning structural instabilities in 2D materials

Authors: Simone Manti, Mark Kamper Svendsen, Nikolaj R. Knøsgaard, Peder M. Lyngby, Kristian S. Thygesen

Abstract: We address the problem of predicting the zero-temperature dynamical stability (DS) of a periodic crystal without computing its full phonon band structure. Here we report the evidence that DS can be inferred with good reliability from the phonon frequencies at the center and boundary of the Brillouin zone (BZ). This analysis represents a validation of the DS test employed by the Computational 2D Ma… ▽ More We address the problem of predicting the zero-temperature dynamical stability (DS) of a periodic crystal without computing its full phonon band structure. Here we report the evidence that DS can be inferred with good reliability from the phonon frequencies at the center and boundary of the Brillouin zone (BZ). This analysis represents a validation of the DS test employed by the Computational 2D Materials Database (C2DB). For 137 dynamically unstable 2D crystals, we displace the atoms along an unstable mode and relax the structure. This procedure yields a dynamically stable crystal in 49 cases. The elementary properties of these new structures are characterised using the C2DB workflow, and it is found that their properties can differ significantly from those of the original unstable crystals, e.g. band gaps are opened by 0.3 eV on average. All the crystal structures and properties are available in the C2DB. Finally, we train a classification model on the DS data for 3295 2D materials in the C2DB using a representation encoding the electronic structure of the crystal. We obtain an excellent receiver operating characteristic (ROC) curve with an area under the curve (AUC) of 0.90, showing that the classification model can drastically reduce computational efforts in high-throughput studies. △ Less

Submitted 20 March, 2023; v1 submitted 20 January, 2022; originally announced January 2022.

Ultraviolet Mie resonances in computationally discovered boron phosphide nanoparticles

Authors: Mark Kamper Svendsen, Hiroshi Sugimoto, Artyom Assadillayev, Daisuke Shima, Minoru Fujii, Kristian Sommer Thygesen, Søren Raza

Abstract: Controlling ultraviolet light at the nanoscale using optical Mie resonances holds great promise for a diverse set of applications, such as lithography, sterilization, and biospectroscopy. However, Mie resonances hosted by dielectric nanoantennas are difficult to realize at ultraviolet wavelengths due to the lack of both suitable materials and fabrication methods. Here, we systematically search for… ▽ More Controlling ultraviolet light at the nanoscale using optical Mie resonances holds great promise for a diverse set of applications, such as lithography, sterilization, and biospectroscopy. However, Mie resonances hosted by dielectric nanoantennas are difficult to realize at ultraviolet wavelengths due to the lack of both suitable materials and fabrication methods. Here, we systematically search for improved materials by computing the frequency dependent optical permittivity of 338 binary semiconductors and insulators from first principles, and evaluate their potential performance as high refractive index materials using Mie theory. Our analysis reveals several interesting candidate materials among which boron phosphide (BP) appears particularly promising. We then prepare BP nanoparticles and demonstrate that they support Mie resonances at visible and ultraviolet wavelengths using both far-field optical measurements and near-field electron energy-loss spectroscopy. We also present a laser reshaping method to realize spherical Mie-resonant BP nanoparticles. With a refractive index above 3 and low absorption losses, BP nanostructures advance Mie optics to the ultraviolet. △ Less

Submitted 27 December, 2021; originally announced December 2021.

Quantum point defects in 2D materials: The QPOD database

Authors: Fabian Bertoldo, Sajid Ali, Simone Manti, Kristian S. Thygesen

Abstract: Atomically thin two-dimensional (2D) materials are ideal hosts of quantum defects as they offer easier control, manipulation and read-out of defect states compared to bulk systems. Here we introduce the Quantum Point Defect (QPOD) database of more than 1900 defect systems with 503 unique intrinsic point defects (vacancies and antisites) in 82 2D insulators. The Atomic Simulation Recipes (ASR) work… ▽ More Atomically thin two-dimensional (2D) materials are ideal hosts of quantum defects as they offer easier control, manipulation and read-out of defect states compared to bulk systems. Here we introduce the Quantum Point Defect (QPOD) database of more than 1900 defect systems with 503 unique intrinsic point defects (vacancies and antisites) in 82 2D insulators. The Atomic Simulation Recipes (ASR) workflow framework was used to perform density functional theory (DFT) calculations of defect formation energies, charge transition levels, Fermi level positions, equilibrium defect and carrier concentrations, transition dipole moments, hyperfine coupling, and zero-field splitting. Excited states and photoluminescence spectra were calculated for selected high-spin defects. In this paper we describe the calculations and workflow behind the QPOD database, present an overview of its content, and discuss some general trends and correlations in the data. We analyse the degree of defect tolerance as well as intrinsic dopability of the host materials and identify promising defects for quantum technological applications. The database is freely available and can be browsed via a web-app interlinked with the Computational 2D Materials Database (C2DB). △ Less

Submitted 5 October, 2021; originally announced October 2021.

Representing individual electronic states for machine learning GW band structures of 2D materials

Authors: Nikolaj Rørbæk Knøsgaard, Kristian Sommer Thygesen

Abstract: Choosing optimal representation methods of atomic and electronic structures is essential when machine learning properties of materials. We address the problem of representing quantum states of electrons in a solid for the purpose of machine leaning state-specific electronic properties. Specifically, we construct a fingerprint based on energy decomposed operator matrix elements (ENDOME) and radiall… ▽ More Choosing optimal representation methods of atomic and electronic structures is essential when machine learning properties of materials. We address the problem of representing quantum states of electrons in a solid for the purpose of machine leaning state-specific electronic properties. Specifically, we construct a fingerprint based on energy decomposed operator matrix elements (ENDOME) and radially decomposed projected density of states (RAD-PDOS), which are both obtainable from a standard density functional theory (DFT) calculation. Using such fingerprints we train a gradient boosting model on a set of 46k G$_0$W$_0$ quasiparticle energies. The resulting model predicts the self-energy correction of states in materials not seen by the model with a mean absolute error of 0.14 eV. By including the material's calculated dielectric constant in the fingerprint the error can be further reduced by 30%, which we find is due to an enhanced ability to learn the correlation/screening part of the self-energy. Our work paves the way for accurate estimates of quasiparticle band structures at the cost of a standard DFT calculation. △ Less

Submitted 7 February, 2022; v1 submitted 13 July, 2021; originally announced July 2021.

Journal ref: Nature Communications volume 13, Article number: 468 (2022)

Spread balanced Wannier functions: Robust and automatable orbital localization

Authors: Pietro F. Fontana, Ask H. Larsen, Thomas Olsen, Kristian S. Thygesen

Abstract: We introduce a new type of Wannier functions (WFs) obtained by minimizing the conventional spread functional with a penalty term proportional to the variance of the spread distribution. This modified Wannierisation scheme is less prone to produce ineffective solutions featuring one or several poorly localized orbitals, making it well suited for complex systems or high-throughput applications. Furt… ▽ More We introduce a new type of Wannier functions (WFs) obtained by minimizing the conventional spread functional with a penalty term proportional to the variance of the spread distribution. This modified Wannierisation scheme is less prone to produce ineffective solutions featuring one or several poorly localized orbitals, making it well suited for complex systems or high-throughput applications. Furthermore, we propose an automatable protocol for selecting the initial guess and determine the optimal number of bands (or equivalently WFs) for the localization algorithm. The improved performance and robustness of the approach is demonstrated for a diverse set of test systems including the NV center in diamond, metal slabs with atomic adsorbates, spontaneous polarization of ferroelectrics and 30 inorganic monolayer materials comprising both metals and semiconductors. The methods are implemented in Python as part of the Atomic Simulation Environment (ASE). △ Less

Submitted 7 November, 2021; v1 submitted 4 July, 2021; originally announced July 2021.

Journal ref: Phys. Rev. B 104, 125140 (2021)

Atomic Simulation Recipes -- a Python framework and library for automated workflows

Authors: Morten Gjerding, Thorbjørn Skovhus, Asbjørn Rasmussen, Fabian Bertoldo, Ask Hjorth Larsen, Jens Jørgen Mortensen, Kristian Sommer Thygesen

Abstract: The Atomic Simulation Recipes (ASR) is an open source Python framework for working with atomistic materials simulations in an efficient and sustainable way that is ideally suited for high-throughput projects. Central to ASR is the concept of a Recipe: a high-level Python script that performs a well defined simulation task robustly and accurately while keeping track of the data provenance. The ASR… ▽ More The Atomic Simulation Recipes (ASR) is an open source Python framework for working with atomistic materials simulations in an efficient and sustainable way that is ideally suited for high-throughput projects. Central to ASR is the concept of a Recipe: a high-level Python script that performs a well defined simulation task robustly and accurately while keeping track of the data provenance. The ASR leverages the functionality of the Atomic Simulation Environment (ASE) to interface with external simulation codes and attain a high abstraction level. We provide a library of Recipes for common simulation tasks employing density functional theory and many-body perturbation schemes. These Recipes utilize the GPAW electronic structure code, but may be adapted to other simulation codes with an ASE interface. Being independent objects with automatic data provenance control, Recipes can be freely combined through Python scripting giving maximal freedom for users to build advanced workflows. ASR also implements a command line interface that can be used to run Recipes and inspect results. The ASR Migration module helps users maintain their data while the Database and App modules makes it possible to create local databases and present them as customized web pages. △ Less

Submitted 27 April, 2021; originally announced April 2021.

Combining density functional theory with macroscopic QED for quantum light-matter interactions in 2D materials

Authors: Mark Kamper Svendsen, Yaniv Kurman, Peter Schmidt, Frank Koppens, Ido Kaminer, Kristian S. Thygesen

Abstract: A quantitative and predictive theory of quantum light-matter interactions in ultra thin materials involves several fundamental challenges. Any realistic model must simultaneously account for the ultra-confined plasmonic modes and their quantization in the presence of losses, while describing the electronic states from first principles. Herein we develop such a framework by combining density functi… ▽ More A quantitative and predictive theory of quantum light-matter interactions in ultra thin materials involves several fundamental challenges. Any realistic model must simultaneously account for the ultra-confined plasmonic modes and their quantization in the presence of losses, while describing the electronic states from first principles. Herein we develop such a framework by combining density functional theory (DFT) with macroscopic quantum electrodynamics, which we use to show Purcell enhancements reaching $10^7$ for intersubband transitions in few-layer transition metal dichalcogenides sandwiched between graphene and a perfect conductor. The general validity of our methodology allows us to put several common approximation paradigms to quantitative test, namely the dipole-approximation, the use of 1D quantum well model wave functions, and the Fermi's Golden rule. The analysis shows that the choice of wave functions is of particular importance. Our work lays the foundation for practical ab initio-based quantum treatments of light matter interactions in realistic nanostructured materials. △ Less

Submitted 31 May, 2021; v1 submitted 17 March, 2021; originally announced March 2021.

Recent Progress of the Computational 2D Materials Database (C2DB)

Authors: M. N. Gjerding, A. Taghizadeh, A. Rasmussen, S. Ali, F. Bertoldo, T. Deilmann, U. P. Holguin, N. R. Knøsgaard, M. Kruse, S. Manti, T. G. Pedersen, T. Skovhus, M. K. Svendsen, J. J. Mortensen, T. Olsen, K. S. Thygesen

Abstract: The C2DB is a highly curated open database organizing a wealth of computed properties for more than 4000 atomically thin two-dimensional (2D) materials. Here we report on new materials and properties that were added to the database since its first release in 2018. The set of new materials comprise several hundred monolayers exfoliated from experimentally known layered bulk materials, (homo)bilayer… ▽ More The C2DB is a highly curated open database organizing a wealth of computed properties for more than 4000 atomically thin two-dimensional (2D) materials. Here we report on new materials and properties that were added to the database since its first release in 2018. The set of new materials comprise several hundred monolayers exfoliated from experimentally known layered bulk materials, (homo)bilayers in various stacking configurations, native point defects in semiconducting monolayers, and chalcogen/halogen Janus monolayers. The new properties include exfoliation energies, Bader charges, spontaneous polarisations, Born charges, infrared polarisabilities, piezoelectric tensors, band topology invariants, exchange couplings, Raman- and second harmonic generation spectra. We also describe refinements of the employed material classification schemes, upgrades of the computational methodologies used for property evaluations, as well as significant enhancements of the data documentation and provenance. Finally, we explore the performance of Gaussian process-based regression for efficient prediction of mechanical and electronic materials properties. The combination of open access, detailed documentation, and extremely rich materials property data sets make the C2DB a unique resource that will advance the science of atomically thin materials. △ Less

Submitted 5 February, 2021; originally announced February 2021.

Comments: 30 pages, 26 figures

Journal ref: 2D Mater. 8 (2021) 044002

Structural and chemical mechanisms governing stability of inorganic Janus nanotubes

Authors: Felix Tim Bölle, August E. G. Mikkelsen, Kristian S. Thygesen, Tejs Vegge, Ivano E. Castelli

Abstract: One-dimensional inorganic nanotubes hold promise for technological applications due to their distinct physical/chemical properties, but so far advancements have been hampered by difficulties in producing single-wall nanotubes with a well-defined radius. In this work we investigate, based on Density Functional Theory (DFT), the formation mechanism of 135 different inorganic nanotubes formed by the… ▽ More One-dimensional inorganic nanotubes hold promise for technological applications due to their distinct physical/chemical properties, but so far advancements have been hampered by difficulties in producing single-wall nanotubes with a well-defined radius. In this work we investigate, based on Density Functional Theory (DFT), the formation mechanism of 135 different inorganic nanotubes formed by the intrinsic self-rolling driving force found in asymmetric 2D Janus sheets. We show that for isovalent Janus sheets, the lattice mismatch between inner and outer atomic layers is the driving force behind the nanotube formation, while in the non-isovalent case it is governed by the difference in chemical bond strength of the inner and outer layer leading to steric effects. From our pool of candidate structures we have identified more than 100 tubes with a preferred radius below 35 Å, which we hypothesize can display unique properties compared to their parent 2D monolayers. Simple descriptors have been identified to accelerate the discovery of small-radius tubes and a Bayesian regression approach has been implemented to assess the uncertainty in our predictions on the radius. △ Less

Submitted 30 November, 2020; originally announced November 2020.

Comments: 26 pages, 8 figures

Two-dimensional Materials with Giant Optical Nonlinearities Near the Theoretical Upper Limit

Authors: Alireza Taghizadeh, Kristian S. Thygesen, Thomas G. Pedersen

Abstract: Nonlinear optical (NLO) phenomena such as harmonic generation, Kerr, and Pockels effects are of great technological importance for lasers, frequency converters, modulators, switches, etc. Recently, two-dimensional (2D) materials have drawn significant attention due to their strong and unique NLO properties. Here, we describe an efficient first-principles workflow for calculating the quadratic opti… ▽ More Nonlinear optical (NLO) phenomena such as harmonic generation, Kerr, and Pockels effects are of great technological importance for lasers, frequency converters, modulators, switches, etc. Recently, two-dimensional (2D) materials have drawn significant attention due to their strong and unique NLO properties. Here, we describe an efficient first-principles workflow for calculating the quadratic optical response and apply it to 375 non-centrosymmetric semiconductor monolayers from the Computational 2D Materials Database (C2DB). Sorting the non-resonant nonlinearities with respect to bandgap $E_g$ reveals an upper limit proportional to $E_g^{-4}$, which is neatly explained by two distinct generic models. We identify multiple promising candidates with giant nonlinearities and bandgaps ranging from 0.4 to 5 eV, some of which approach the theoretical upper limit and greatly outperform known materials. Our comprehensive library of ab initio NLO spectra for all 375 monolayers is freely available via the C2DB website. We expect this work to pave the way for highly efficient and compact opto-electronic devices based on 2D materials. △ Less

Submitted 22 October, 2020; originally announced October 2020.

Comments: 18 pages, 5 Figures

Journal ref: ACS Nano 15, 4, (2021), 7155-7167

Anomalous Non-Hydrogenic Exciton Series in 2D Materials on High-$κ$ Dielectric Substrates

Authors: Anders C. Riis-Jensen, Morten N. Gjerding, Saverio Russo, Kristian S. Thygesen

Abstract: Engineering of the dielectric environment represents a powerful strategy to control the electronic and optical properties of two-dimensional (2D) materials without compromising their structural integrity. Here we show that the recent development of high-$κ$ 2D materials present new opportunities for dielectric engineering. By solving a 2D Mott-Wannier exciton model for WSe$_2$ on different substra… ▽ More Engineering of the dielectric environment represents a powerful strategy to control the electronic and optical properties of two-dimensional (2D) materials without compromising their structural integrity. Here we show that the recent development of high-$κ$ 2D materials present new opportunities for dielectric engineering. By solving a 2D Mott-Wannier exciton model for WSe$_2$ on different substrates using a screened electron-hole interaction obtained from first principles, we demonstrate that the exciton Rydberg series changes qualitatively when the dielectric screening within the 2D semiconductor becomes dominated by the substrate. In this regime, the distance dependence of the screening is reversed and the effective screening increases with exciton radius, which is opposite to the conventional 2D screening regime. Consequently, higher excitonic states become underbound rather than overbound as compared to the Hydrogenic Rydberg series. Finally, we derive a general analytical expression for the exciton binding energy of the entire 2D Rydberg series △ Less

Submitted 25 September, 2020; originally announced September 2020.

Journal ref: Phys. Rev. B 102, 201402 (2020)

Towards fully automatized GW band structure calculations: What we can learn from 60.000 self-energy evaluations

Authors: Asbjørn Rasmussen, Thorsten Deilmann, Kristian S. Thygesen

Abstract: We analyze a data set comprising 370 GW band structures composed of 61716 quasiparticle (QP) energies of two-dimensional (2D) materials spanning 14 crystal structures and 52 elements. The data results from PAW plane wave based one-shot G$_0$W$_0$@PBE calculations with full frequency integration. We investigate the distribution of key quantities like the QP self-energy corrections and renormalizati… ▽ More We analyze a data set comprising 370 GW band structures composed of 61716 quasiparticle (QP) energies of two-dimensional (2D) materials spanning 14 crystal structures and 52 elements. The data results from PAW plane wave based one-shot G$_0$W$_0$@PBE calculations with full frequency integration. We investigate the distribution of key quantities like the QP self-energy corrections and renormalization factor $Z$ and explore their dependence on chemical composition and magnetic state. The linear QP approximation is identified as a significant error source and propose schemes for controlling and drastically reducing this error at low computational cost. We analyze the reliability of the $1/N_\text{PW}$ basis set extrapolation and find that is well-founded with narrow distributions of $r^2$ peaked very close to 1. Finally, we explore the validity of the scissors operator approximation concluding that it is generally not valid for reasonable error tolerances. Our work represents a step towards the development of automatized workflows for high-throughput G$_0$W$_0$ band structure calculations for solids. △ Less

Submitted 4 January, 2021; v1 submitted 1 September, 2020; originally announced September 2020.

Comments: 11 pages, 9 figures, 1 table