-
Teaching Energy-Efficient Software -- An Experience Report
Authors:
Henrik Bærbak Christensen,
Maja Hanne Kirkeby,
Bent Thomsen,
Lone Leth Thomsen
Abstract:
Environmental sustainability is a major and relevant challenge facing computing. Therefore, we must start teaching theory, techniques, and practices that both increase an awareness in our student population as well a provide concrete advice to be applied in practical software development. In this experience report, we focus on energy consumption of executing software, and describe teaching approac…
▽ More
Environmental sustainability is a major and relevant challenge facing computing. Therefore, we must start teaching theory, techniques, and practices that both increase an awareness in our student population as well a provide concrete advice to be applied in practical software development. In this experience report, we focus on energy consumption of executing software, and describe teaching approaches from three different universities that all address software energy consumption in various ways. Our main contribution is reporting lessons learned from these experiences and sketching some issues that teachers must be aware of when designing learning goals, teaching material and exercises.
△ Less
Submitted 28 April, 2025;
originally announced April 2025.
-
An Intermediate-mass Black Hole Lurking in A Galactic Halo Caught Alive during Outburst
Authors:
C. -C. Jin,
D. -Y. Li,
N. Jiang,
L. -X. Dai,
H. -Q. Cheng,
J. -Z. Zhu,
C. -W. Yang,
A. Rau,
P. Baldini,
T. -G. Wang,
H. -Y. Zhou,
W. Yuan,
C. Zhang,
X. -W. Shu,
R. -F. Shen,
Y. -L. Wang,
S. -X. Wen,
Q. -Y. Wu,
Y. -B. Wang,
L. L. Thomsen,
Z. -J. Zhang,
W. -J. Zhang,
A. Coleiro,
R. Eyles-Ferris,
X. Fang
, et al. (116 additional authors not shown)
Abstract:
Stellar-mass and supermassive black holes abound in the Universe, whereas intermediate-mass black holes (IMBHs) of ~10^2-10^5 solar masses in between are largely missing observationally, with few cases found only. Here we report the real-time discovery of a long-duration X-ray transient, EP240222a, accompanied by an optical flare with prominent H and He emission lines revealed by prompt follow-up…
▽ More
Stellar-mass and supermassive black holes abound in the Universe, whereas intermediate-mass black holes (IMBHs) of ~10^2-10^5 solar masses in between are largely missing observationally, with few cases found only. Here we report the real-time discovery of a long-duration X-ray transient, EP240222a, accompanied by an optical flare with prominent H and He emission lines revealed by prompt follow-up observations. Its observed properties evidence an IMBH located unambiguously in the halo of a nearby galaxy and flaring by tidally disrupting a star -- the only confirmed off-nucleus IMBH-tidal disruption event so far. This work demonstrates the potential of sensitive time-domain X-ray surveys, complemented by timely multi-wavelength follow-ups, in probing IMBHs, their environments, demographics, origins and connections to stellar-mass and supermassive black holes.
△ Less
Submitted 16 January, 2025;
originally announced January 2025.
-
A multi-dimensional view of a unified model for TDEs
Authors:
Edward J. Parkinson,
Christian Knigge,
Lixin Dai,
Lars Lund Thomsen,
James H. Matthews,
Knox S. Long
Abstract:
Tidal disruption events (TDEs) can generate non-spherical, relativistic and optically thick outflows. Simulations show that the radiation we observe is reprocessed by these outflows. According to a unified model suggested by these simulations, the spectral energy distributions (SEDs) of TDEs depend strongly on viewing angle: low [high] optical-to-X-ray ratios (OXRs) correspond to face-on [edge-on]…
▽ More
Tidal disruption events (TDEs) can generate non-spherical, relativistic and optically thick outflows. Simulations show that the radiation we observe is reprocessed by these outflows. According to a unified model suggested by these simulations, the spectral energy distributions (SEDs) of TDEs depend strongly on viewing angle: low [high] optical-to-X-ray ratios (OXRs) correspond to face-on [edge-on] orientations. Post-processing with radiative transfer codes have simulated the emergent spectra, but have so far been carried out only in a quasi-1D framework, with three atomic species (H, He and O). Here, we present 2.5D Monte Carlo radiative transfer simulations which model the emission from a non-spherical outflow, including a more comprehensive set of cosmically abundant species. While the basic trend of OXR increasing with inclination is preserved, the inherently multi-dimensional nature of photon transport through the non-spherical outflow significantly affects the emergent SEDs. Relaxing the quasi-1D approximation allows photons to preferentially escape in (polar) directions of lower optical depth, resulting in a greater variation of bolometric luminosity as a function of inclination. According to our simulations, inclination alone may not fully explain the large dynamic range of observed TDE OXRs. We also find that including metals, other than Oxygen, changes the emergent spectra significantly, resulting in stronger absorption and emission lines in the extreme ultraviolet, as well a greater variation in the OXR as a function of inclination. Whilst our results support previously proposed unified models for TDEs, they also highlight the critical importance of multi-dimensional ionization and radiative transfer.
△ Less
Submitted 28 May, 2025; v1 submitted 29 August, 2024;
originally announced August 2024.
-
Modeling Multiple X-Ray Reflection in Super-Eddington Winds
Authors:
Zijian Zhang,
Lars Lund Thomsen,
Lixin Dai,
Christopher S. Reynolds,
Javier A. García,
Erin Kara,
Riley Connors,
Megan Masterson,
Yuhan Yao,
Thomas Dauser
Abstract:
It has been recently discovered that a few super-Eddington sources undergoing black hole super-Eddington accretion exhibit X-ray reflection signatures. In such new systems, one expects that the coronal X-ray emissions are mainly reflected by optically thick super-Eddington winds instead of thin disks. In this paper, we conduct a series of general relativistic ray-tracing and Monte Carlo radiative…
▽ More
It has been recently discovered that a few super-Eddington sources undergoing black hole super-Eddington accretion exhibit X-ray reflection signatures. In such new systems, one expects that the coronal X-ray emissions are mainly reflected by optically thick super-Eddington winds instead of thin disks. In this paper, we conduct a series of general relativistic ray-tracing and Monte Carlo radiative transfer simulations to model the X-ray reflection signatures, especially the characteristic Fe K$α$ line, produced from super-Eddington accretion flows around non-spinning black holes. In particular, we allow the photons emitted by a lamppost corona to be reflected multiple times in a cone-like funnel surrounded by fast winds. We find that the Fe K$α$ line profile most sensitively depends on the wind kinematics, while its exact shape also depends on the funnel open angle and corona height. Furthermore, very interestingly, we find that the Fe K$α$ line can have a prominent double-peak profile in certain parameter spaces even with a face-on orientation. Moreover, we compare the Fe K$α$ line profiles produced from super-Eddington and thin disks and show that such lines can provide important insights into the understanding of black hole systems undergoing super-Eddington accretion.
△ Less
Submitted 12 December, 2024; v1 submitted 11 July, 2024;
originally announced July 2024.
-
Diamond Surface Functionalization via Visible Light-Driven C-H Activation for Nanoscale Quantum Sensing
Authors:
Lila V. H. Rodgers,
Suong T. Nguyen,
James H. Cox,
Kalliope Zervas,
Zhiyang Yuan,
Sorawis Sangtawesin,
Alastair Stacey,
Cherno Jaye,
Conan Weiland,
Anton Pershin,
Adam Gali,
Lars Thomsen,
Simon A. Meynell,
Lillian B. Hughes,
Ania C. Bleszynski Jayich,
Xin Gui,
Robert J. Cava,
Robert R. Knowles,
Nathalie P. de Leon
Abstract:
Nitrogen-vacancy centers in diamond are a promising platform for nanoscale nuclear magnetic resonance sensing. Despite significant progress towards using NV centers to detect and localize nuclear spins down to the single spin level, NV-based spectroscopy of individual, intact, arbitrary target molecules remains elusive. NV molecular sensing requires that target molecules are immobilized within a f…
▽ More
Nitrogen-vacancy centers in diamond are a promising platform for nanoscale nuclear magnetic resonance sensing. Despite significant progress towards using NV centers to detect and localize nuclear spins down to the single spin level, NV-based spectroscopy of individual, intact, arbitrary target molecules remains elusive. NV molecular sensing requires that target molecules are immobilized within a few nanometers of NV centers with long spin coherence time. The inert nature of diamond typically requires harsh functionalization techniques such as thermal annealing or plasma processing, limiting the scope of functional groups that can be attached to the surface. Solution-phase chemical methods can be more readily generalized to install diverse functional groups, but they have not been widely explored for single-crystal diamond surfaces. Moreover, realizing shallow NV centers with long spin coherence times requires highly ordered single-crystal surfaces, and solution-phase functionalization has not yet been shown to be compatible with such demanding conditions. In this work, we report a versatile strategy to directly functionalize C-H bonds on single-crystal diamond surfaces under ambient conditions using visible light. This functionalization method is compatible with charge stable NV centers within 10 nm of the surface with spin coherence times comparable to the state of the art. As a proof of principle, we use shallow ensembles of NV centers to detect nuclear spins from functional groups attached to the surface. Our approach to surface functionalization based on visible light-driven C-H bond activation opens the door to deploying NV centers as a broad tool for chemical sensing and single-molecule spectroscopy.
△ Less
Submitted 13 September, 2023;
originally announced September 2023.
-
One-step Preparation of ZnO Electron Transport Layers Functionalized with Benzoic Acid Derivatives
Authors:
Hao Liu,
Chao Wang,
Wen Liang Tan,
Lars Thomsen,
Anthony S. R. Chesman,
Yvonne Hora,
Martyn Jevric,
Jonas M. Bjuggren,
Mats R. Andersson,
Yahui Tang,
Linjing Tang,
Doan Vu,
Christopher R. McNeill
Abstract:
We present a "one-step" approach to modify ZnO electron transport layers (ETLs) used in organic solar cells. This approach involves adding benzoic acid (BZA) derivatives directly to the ZnO precursor solution, which are then present at the surface of the resulting ZnO film. We demonstrate this approach for three different BZA derivatives, namely benzoic acid, chlorobenzoic acid, and 4-hydrazinoben…
▽ More
We present a "one-step" approach to modify ZnO electron transport layers (ETLs) used in organic solar cells. This approach involves adding benzoic acid (BZA) derivatives directly to the ZnO precursor solution, which are then present at the surface of the resulting ZnO film. We demonstrate this approach for three different BZA derivatives, namely benzoic acid, chlorobenzoic acid, and 4-hydrazinobenzoic acid. For all molecules, improved device performance and stability is demonstrated in solar cells using an active layer blend of PTQ10 (donor) and ITIC-Br (non-fullerene acceptor) compared to such cells prepared using untreated ZnO. Furthermore, similar or improved device performance and stability is demonstrated compared to conventional PEIE treatment of ZnO. The presence of the BZA derivatives at the surface after processing is established using X-ray photoelectron spectroscopy and near-edge X-ray absorption fine-structure spectroscopy. From atomic force microscopy analysis and X-ray diffraction studies, the addition of BZA derivatives appears to restrict ZnO grain growth; however, this does not negatively impact device performance. ZnO layers treated with BZA derivatives also exhibit higher water contact angle and lower work function compared to untreated ZnO. This approach enables simplification of device manufacture while still allowing optimization of the surface properties of metal oxide ETLs. Keywords: electron transport layers, zinc oxide, organic solar cells, surface modification
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
An asymmetric electron-scattering photosphere around optical tidal disruption events
Authors:
Giorgos Leloudas,
Mattia Bulla,
Aleksandar Cikota,
Lixin Dai,
Lars L. Thomsen,
Justyn R. Maund,
Panos Charalampopoulos,
Nathaniel Roth,
Iair Arcavi,
Katie Auchettl,
Daniele B. Malesani,
Matt Nicholl,
Enrico Ramirez-Ruiz
Abstract:
A star crossing the tidal radius of a supermassive black hole will be spectacularly ripped apart with an accompanying burst of radiation. A few tens of such tidal disruption events (TDEs) have now been identified in the optical wavelengths, but the exact origin of the strong optical emission remains inconclusive. Here we report polarimetric observations of three TDEs. The continuum polarization is…
▽ More
A star crossing the tidal radius of a supermassive black hole will be spectacularly ripped apart with an accompanying burst of radiation. A few tens of such tidal disruption events (TDEs) have now been identified in the optical wavelengths, but the exact origin of the strong optical emission remains inconclusive. Here we report polarimetric observations of three TDEs. The continuum polarization is independent of wavelength, while emission lines are partially depolarized. These signatures are consistent with optical photons being scattered and polarized in an envelope of free electrons. An almost axisymmetric photosphere viewed from different angles is in broad agreement with the data, but there is also evidence for deviations from axial symmetry before the peak of the flare and significant time evolution at early times, compatible with the rapid formation of an accretion disk. By combining a super-Eddington accretion model with a radiative transfer code we generate predictions for the degree of polarization as a function of disk mass and viewing angle, and we show that the predicted levels are compatible with the observations, for extended reprocessing envelopes of $\sim$1000 gravitational radii. Spectropolarimetry therefore constitutes a new observational test for TDE models, and opens an important new line of exploration in the study of TDEs.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Accurate and fast identification of minimally prepared bacteria phenotypes using Raman spectroscopy assisted by machine learning
Authors:
Benjamin Lundquist Thomsen,
Jesper B. Christensen,
Olga Rodenko,
Iskander Usenov,
Rasmus Birkholm Grønnemose,
Thomas Emil Andersen,
Mikael Lassen
Abstract:
The worldwide increase of antimicrobial resistance (AMR) is a serious threat to human health. To avert the spread of AMR, fast reliable diagnostics tools that facilitate optimal antibiotic stewardship are an unmet need. In this regard, Raman spectroscopy promises rapid label- and culture-free identification and antimicrobial susceptibility testing (AST) in a single step. However, even though many…
▽ More
The worldwide increase of antimicrobial resistance (AMR) is a serious threat to human health. To avert the spread of AMR, fast reliable diagnostics tools that facilitate optimal antibiotic stewardship are an unmet need. In this regard, Raman spectroscopy promises rapid label- and culture-free identification and antimicrobial susceptibility testing (AST) in a single step. However, even though many Raman-based bacteria-identification and AST studies have demonstrated impressive results, some shortcomings must be addressed. To bridge the gap between proof-of-concept studies and clinical application, we have developed machine learning techniques in combination with a novel data-augmentation algorithm, for fast identification of minimally prepared bacteria phenotypes and the distinctions of methicillin-resistant (MR) from methicillin-susceptible (MS) bacteria. For this we have implemented a spectral transformer model for hyper-spectral Raman images of bacteria. We show that our model outperforms the standard convolutional neural network models on a multitude of classification problems, both in terms of accuracy and in terms of training time. We attain more than 96$\%$ classification accuracy on a dataset consisting of 15 different classes and 95.6$\%$ classification accuracy for six MR-MS bacteria species. More importantly, our results are obtained using only fast and easy-to-produce training and test data
△ Less
Submitted 27 June, 2022;
originally announced June 2022.
-
Dynamical Unification of Tidal Disruption Events
Authors:
Lars Lund Thomsen,
Tom Kwan,
Lixin Dai,
Samantha Wu,
Enrico Ramirez-Ruiz
Abstract:
About a hundred tidal disruption events (TDEs) have been observed and they exhibit a wide range of emission properties both at peak and over their lifetimes. Some TDEs peak predominantly at X-ray energies while others radiate chiefly at UV and optical wavelengths. While the peak luminosities across TDEs show distinct properties, the evolutionary behavior can also vary between TDEs with similar pea…
▽ More
About a hundred tidal disruption events (TDEs) have been observed and they exhibit a wide range of emission properties both at peak and over their lifetimes. Some TDEs peak predominantly at X-ray energies while others radiate chiefly at UV and optical wavelengths. While the peak luminosities across TDEs show distinct properties, the evolutionary behavior can also vary between TDEs with similar peak emission properties. At late time, some optical TDEs rebrighten in X-rays, while others maintain strong UV/optical emission components. In this Letter, we conduct three-dimensional general relativistic radiation magnetohydrodynamics simulations of TDE accretion disks at varying accretion rates ranging from a few to a few tens of the Eddington accretion rate. We make use of Monte Carlo radiative transfer simulations to calculate the reprocessed spectra at various inclinations and at different evolutionary stages. We confirm the unified model proposed by Dai et al. (2018), which predicts that the observed emission largely depends on the viewing angle of the observer with respect to the disk orientation (X-ray strong when viewed face-on and UV/optically strong when viewed disk-on). What is more, we find that disks with higher accretion rates have elevated wind and disk densities, which increases the reprocessing of the high-energy radiation and thus generally augments the optical-to-X-ray flux ratio along a particular viewing angle. This implies that at later times, as the accretion level declines, we expect the funnel to effectively open up and allow more X-rays to leak out along intermediate viewing angles. Such dynamical model for TDEs can provide a natural explanation for the diversity in the emission properties observed in TDEs at peak and along their temporal evolution.
△ Less
Submitted 6 June, 2022;
originally announced June 2022.
-
Relativistic X-ray reverberation from super-Eddington accretion flow
Authors:
Lars Lund Thomsen,
Jane Lixin Dai,
Erin Kara,
Chris Reynolds
Abstract:
X-ray reverberation is a powerful technique which maps out the structure of the inner regions of accretion disks around black holes using the echoes of the coronal emission reflected by the disk. While the theory of X-ray reverberation has been developed almost exclusively for standard thin disks, recently reverberation lags have been observed from likely super-Eddington accretion sources such as…
▽ More
X-ray reverberation is a powerful technique which maps out the structure of the inner regions of accretion disks around black holes using the echoes of the coronal emission reflected by the disk. While the theory of X-ray reverberation has been developed almost exclusively for standard thin disks, recently reverberation lags have been observed from likely super-Eddington accretion sources such as the jetted tidal disruption event Swift J1644+57. In this paper, we extend X-ray reverberation studies into the super-Eddington accretion regime, focusing on investigating the lags in the Fe Kα line region. We find that the coronal photons are mostly reflected by the fast and optically thick winds launched from super-Eddington accretion flow, and this funnel-like reflection geometry produces lag-frequency and lag-energy spectra with unique characteristics. The lag-frequency spectra exhibits a step-function like decline near the first zero-crossing point. As a result, the shape of the lag-energy spectra remains almost independent of the choice of frequency bands and linearly scales with the black hole mass for a large range of parameter spaces. Not only can these morphological differences be used to distinguish super-Eddington accretion systems from sub-Eddington systems, they are also key for constraining the reflection geometry and extracting parameters from the observed lags. When explaining the X-ray reverberation lags of Swift J1644+57, we find that the super-Eddington disk geometry is preferred over the thin disk, for which we obtain a black hole mass of 5-6 million solar masses and a coronal height around 10 gravitational radii by fitting the lag spectra to our modeling.
△ Less
Submitted 29 November, 2021; v1 submitted 8 September, 2021;
originally announced September 2021.
-
Hydrothermal liquefaction of sewage sludge; energy considerations and fate of micropollutants during pilot scale processing
Authors:
Lars Thomsen,
Pedro N. Carvalho,
Juliano Souza Dos Passos,
Konstantinos Anastasakis,
Kai Bester,
Patrick Biller
Abstract:
The beneficial use of sewage sludge for valorization of carbon and nutrients is of increasing interest while micropollutants in sludge are of concern to the environment and human health. This study investigates the hydrothermal liquefaction (HTL) of sewage sludge in a continuous flow pilot scale reactor at conditions expected to reflect future industrial installations. The processing is evaluated…
▽ More
The beneficial use of sewage sludge for valorization of carbon and nutrients is of increasing interest while micropollutants in sludge are of concern to the environment and human health. This study investigates the hydrothermal liquefaction (HTL) of sewage sludge in a continuous flow pilot scale reactor at conditions expected to reflect future industrial installations. The processing is evaluated in terms of energy efficiency, bio-crude yields and quality. The raw sludge and post-HTL process water and solid residues were analyzed extensively for micropollutants via HPLC-MS/MS for target pharmaceuticals including antibiotics, blood pressure medicine, antidepressants, analgesics, x-ray contrast media, angiotensin II receptor blockers, immunosuppressant drugs and biocides including triazines, triazoles, carbamates, a carboxamide, an organophosphate and a cationic surfactant. The results show that a positive energy return on investment was achieved for all three HTL processing temperatures of 300, 325 and 350 °C with the most beneficial temperature identified as 325 °C. The analysis of the HTL by-products, process water and solids, indicates that HTL is indeed a suitable technology for the destruction of micropollutants. However, due to the large matrix effect of the HTL process water it can only be stated with certainty that 9 out of 30 pharmaceuticals and 5 out of 7 biocides products were destroyed successfully (over 98% removal). One compound, the antidepressant citalopram, was shown to be moderately recalcitrant at 300 °C with 87% removal and was only destroyed at temperatures $\geq$325 °C ($>$99% removal). Overall, the results suggest that HTL is a suitable technology for energy efficient and value added sewage sludge treatment enabling destruction of micropollutants.
△ Less
Submitted 11 May, 2021;
originally announced May 2021.
-
X-ray fluorescence from super-Eddington accreting black holes
Authors:
Lars Lund Thomsen,
Jane Lixin Dai,
Enrico Ramirez-Ruiz,
Erin Kara,
Chris Reynolds
Abstract:
X-ray reverberation has proven to be a powerful tool capable of probing the innermost region of accretion disks around compact objects. Current theoretical effort generally assumes that the disk is geometrically thin, optically thick and orbiting with Keplerian speed. Thus, these models cannot be applied to systems where super-Eddington accretion happens because the thin disk approximation fails i…
▽ More
X-ray reverberation has proven to be a powerful tool capable of probing the innermost region of accretion disks around compact objects. Current theoretical effort generally assumes that the disk is geometrically thin, optically thick and orbiting with Keplerian speed. Thus, these models cannot be applied to systems where super-Eddington accretion happens because the thin disk approximation fails in this accretion regime. Furthermore, state-of-the-art numerical simulations show that optically thick winds are launched from the super-Eddington accretion disks, and thereby changing the reflection geometry significantly from the thin disk picture. We carry out theoretical investigations on this topic by focusing on the Fe K$α$ fluorescent lines produced from super-Eddington disks, and show that their line profiles are shaped by the funnel geometry and wind acceleration. We also systematically compare the Fe line profiles from super-Eddington thick disks to those from thin disks, and find that the former are substantially more blueshifted and symmetric in shape. These results are consistent with the observed Fe K$α$ line from the jetted tidal disruption event, Swift J1644, in which a transient super-Eddington accretion disk was formed out of stellar debris. Therefore, careful analysis of the Fe K$α$ line profile can be used to identify systems undergoing super-Eddington accretion.
△ Less
Submitted 20 September, 2019; v1 submitted 26 July, 2019;
originally announced July 2019.
-
The Modular X- and Gamma-Ray Sensor (MXGS)of the ASIM Payload on the International Space Station
Authors:
Nikolai Østgaard,
Jan E. Balling,
Thomas Bjørnsen,
Peter Brauer,
Carl Budtz-Jørgensen,
Waldemar Bujwan,
Brant Carlson,
Freddy Christiansen,
Paul Connell,
Chris Eyles,
Dominik Fehlker,
Georgi Genov,
Pawel Grudziński,
Pavlo Kochkin,
Anja Kohfeldt,
Irfan Kuvvetli,
Per Lundahl Thomsen,
Søren Møller Pedersen,
Javier Navarro-Gonzalez,
Torsten Neubert,
Kåre Njøten,
Piotr Orleanski,
Bilal Hasan Qureshi,
Linga Reddy Cenkeramaddi,
Victor Reglero
, et al. (10 additional authors not shown)
Abstract:
The Modular X- and Gamma-ray Sensor (MXGS) is an imaging and spectral X- and Gamma-ray instrument mounted on the starboard side of the Columbus module on the International Space Station. Together with the Modular Multi-Spectral Imaging Assembly (MMIA) (Chanrion et al. this issue) MXGS constitutes the instruments of the Atmosphere-Space Interactions Monitor (ASIM) (Neubert et al. this issue). The m…
▽ More
The Modular X- and Gamma-ray Sensor (MXGS) is an imaging and spectral X- and Gamma-ray instrument mounted on the starboard side of the Columbus module on the International Space Station. Together with the Modular Multi-Spectral Imaging Assembly (MMIA) (Chanrion et al. this issue) MXGS constitutes the instruments of the Atmosphere-Space Interactions Monitor (ASIM) (Neubert et al. this issue). The main objectives of MXGS are to image and measure the spectrum of X- and $γ$-rays from lightning discharges, known as Terrestrial Gamma-ray Flashes (TGFs), and for MMIA to image and perform high speed photometry of Transient Luminous Events (TLEs) and lightning discharges. With these two instruments specifically designed to explore the relation between electrical discharges, TLEs and TGFs, ASIM is the first mission of its kind.
△ Less
Submitted 25 June, 2019;
originally announced June 2019.
-
Higgs Physics at the HL-LHC and HE-LHC
Authors:
M. Cepeda,
S. Gori,
P. Ilten,
M. Kado,
F. Riva,
R. Abdul Khalek,
A. Aboubrahim,
J. Alimena,
S. Alioli,
A. Alves,
C. Asawatangtrakuldee,
A. Azatov,
P. Azzi,
S. Bailey,
S. Banerjee,
E. L. Barberio,
D. Barducci,
G. Barone,
M. Bauer,
C. Bautista,
P. Bechtle,
K. Becker,
A. Benaglia,
M. Bengala,
N. Berger
, et al. (352 additional authors not shown)
Abstract:
The discovery of the Higgs boson in 2012, by the ATLAS and CMS experiments, was a success achieved with only a percent of the entire dataset foreseen for the LHC. It opened a landscape of possibilities in the study of Higgs boson properties, Electroweak Symmetry breaking and the Standard Model in general, as well as new avenues in probing new physics beyond the Standard Model. Six years after the…
▽ More
The discovery of the Higgs boson in 2012, by the ATLAS and CMS experiments, was a success achieved with only a percent of the entire dataset foreseen for the LHC. It opened a landscape of possibilities in the study of Higgs boson properties, Electroweak Symmetry breaking and the Standard Model in general, as well as new avenues in probing new physics beyond the Standard Model. Six years after the discovery, with a conspicuously larger dataset collected during LHC Run 2 at a 13 TeV centre-of-mass energy, the theory and experimental particle physics communities have started a meticulous exploration of the potential for precision measurements of its properties. This includes studies of Higgs boson production and decays processes, the search for rare decays and production modes, high energy observables, and searches for an extended electroweak symmetry breaking sector. This report summarises the potential reach and opportunities in Higgs physics during the High Luminosity phase of the LHC, with an expected dataset of pp collisions at 14 TeV, corresponding to an integrated luminosity of 3 ab$^{-1}$. These studies are performed in light of the most recent analyses from LHC collaborations and the latest theoretical developments. The potential of an LHC upgrade, colliding protons at a centre-of-mass energy of 27 TeV and producing a dataset corresponding to an integrated luminosity of 15 ab$^{-1}$, is also discussed.
△ Less
Submitted 19 March, 2019; v1 submitted 31 January, 2019;
originally announced February 2019.
-
Learning to quantify emphysema extent: What labels do we need?
Authors:
Silas Nyboe Ørting,
Jens Petersen,
Laura H. Thomsen,
Mathilde M. W. Wille,
Marleen de Bruijne
Abstract:
Accurate assessment of pulmonary emphysema is crucial to assess disease severity and subtype, to monitor disease progression and to predict lung cancer risk. However, visual assessment is time-consuming and subject to substantial inter-rater variability and standard densitometry approaches to quantify emphysema remain inferior to visual scoring. We explore if machine learning methods that learn fr…
▽ More
Accurate assessment of pulmonary emphysema is crucial to assess disease severity and subtype, to monitor disease progression and to predict lung cancer risk. However, visual assessment is time-consuming and subject to substantial inter-rater variability and standard densitometry approaches to quantify emphysema remain inferior to visual scoring. We explore if machine learning methods that learn from a large dataset of visually assessed CT scans can provide accurate estimates of emphysema extent. We further investigate if machine learning algorithms that learn from a scoring of emphysema extent can outperform algorithms that learn only from a scoring of emphysema presence. We compare four Multiple Instance Learning classifiers that are trained on emphysema presence labels, and five Learning with Label Proportions classifiers that are trained on emphysema extent labels. We evaluate performance on 600 low-dose CT scans from the Danish Lung Cancer Screening Trial and find that learning from emphysema presence labels, which are much easier to obtain, gives equally good performance to learning from emphysema extent labels. The best classifiers achieve intra-class correlation coefficients around 0.90 and average overall agreement with raters of 78% and 79% on six emphysema extent classes versus inter-rater agreement of 83%.
△ Less
Submitted 17 October, 2018;
originally announced October 2018.
-
Deep Learning from Label Proportions for Emphysema Quantification
Authors:
Gerda Bortsova,
Florian Dubost,
Silas Ørting,
Ioannis Katramados,
Laurens Hogeweg,
Laura Thomsen,
Mathilde Wille,
Marleen de Bruijne
Abstract:
We propose an end-to-end deep learning method that learns to estimate emphysema extent from proportions of the diseased tissue. These proportions were visually estimated by experts using a standard grading system, in which grades correspond to intervals (label example: 1-5% of diseased tissue). The proposed architecture encodes the knowledge that the labels represent a volumetric proportion. A cus…
▽ More
We propose an end-to-end deep learning method that learns to estimate emphysema extent from proportions of the diseased tissue. These proportions were visually estimated by experts using a standard grading system, in which grades correspond to intervals (label example: 1-5% of diseased tissue). The proposed architecture encodes the knowledge that the labels represent a volumetric proportion. A custom loss is designed to learn with intervals. Thus, during training, our network learns to segment the diseased tissue such that its proportions fit the ground truth intervals. Our architecture and loss combined improve the performance substantially (8% ICC) compared to a more conventional regression network. We outperform traditional lung densitometry and two recently published methods for emphysema quantification by a large margin (at least 7% AUC and 15% ICC), and achieve near-human-level performance. Moreover, our method generates emphysema segmentations that predict the spatial distribution of emphysema at human level.
△ Less
Submitted 23 July, 2018;
originally announced July 2018.
-
Feature learning based on visual similarity triplets in medical image analysis: A case study of emphysema in chest CT scans
Authors:
Silas Nyboe Ørting,
Jens Petersen,
Veronika Cheplygina,
Laura H. Thomsen,
Mathilde M W Wille,
Marleen de Bruijne
Abstract:
Supervised feature learning using convolutional neural networks (CNNs) can provide concise and disease relevant representations of medical images. However, training CNNs requires annotated image data. Annotating medical images can be a time-consuming task and even expert annotations are subject to substantial inter- and intra-rater variability. Assessing visual similarity of images instead of indi…
▽ More
Supervised feature learning using convolutional neural networks (CNNs) can provide concise and disease relevant representations of medical images. However, training CNNs requires annotated image data. Annotating medical images can be a time-consuming task and even expert annotations are subject to substantial inter- and intra-rater variability. Assessing visual similarity of images instead of indicating specific pathologies or estimating disease severity could allow non-experts to participate, help uncover new patterns, and possibly reduce rater variability. We consider the task of assessing emphysema extent in chest CT scans. We derive visual similarity triplets from visually assessed emphysema extent and learn a low dimensional embedding using CNNs. We evaluate the networks on 973 images, and show that the CNNs can learn disease relevant feature representations from derived similarity triplets. To our knowledge this is the first medical image application where similarity triplets has been used to learn a feature representation that can be used for embedding unseen test images
△ Less
Submitted 19 June, 2018;
originally announced June 2018.
-
Molecular nitrogen acceptors in ZnO nanowires induced by nitrogen plasma annealing
Authors:
C. Ton-That,
L. Zhu,
M. N. Lockrey,
M. R. Phillips,
B. C. C. Cowie,
A. Tadich,
L. Thomsen,
S. Khachadorian,
S. Schlichting,
N. Jankowski,
A. Hoffmann
Abstract:
X-ray absorption near-edge spectroscopy (XANES), photoluminescence, cathodoluminescence and Raman spectroscopy have been used to investigate the chemical states of nitrogen dopants in ZnO nanowires. It is found that nitrogen exists in multiple states: NO, NZn and loosely bound N2 molecule. The work establishes a direct link between a donor-acceptor pair (DAP) emission at 3.232 eV and the concentra…
▽ More
X-ray absorption near-edge spectroscopy (XANES), photoluminescence, cathodoluminescence and Raman spectroscopy have been used to investigate the chemical states of nitrogen dopants in ZnO nanowires. It is found that nitrogen exists in multiple states: NO, NZn and loosely bound N2 molecule. The work establishes a direct link between a donor-acceptor pair (DAP) emission at 3.232 eV and the concentration of loosely bound N2. These results confirm that N2 at Zn site is a potential candidate for producing a shallow acceptor state in N-doped ZnO as theoretically predicted by Lambrecht and Boonchun [Phys. Rev. B 87, 195207 (2013)]. Additionally, shallow acceptor states arising from NO complexes have been ruled out in this study.
△ Less
Submitted 22 June, 2015;
originally announced June 2015.
-
Extremely high negative electron affinity of diamond via magnesium adsorption
Authors:
Kane M. O'Donnell,
Mark T. Edmonds,
Anton Tadich,
Lars Thomsen,
Alastair Stacey,
Alex Schenk,
Chris I. Pakes,
Lothar Ley
Abstract:
We report large negative electron affinity (NEA) on diamond (100) using magnesium adsorption on a previously oxygen-terminated surface. The measured NEA is up to $(-2.01\pm0.05)$ eV, the largest reported negative electron affinity to date. Despite the expected close relationship between the surface chemistry of Mg and Li species on oxygen-terminated diamond, we observe differences in the adsorptio…
▽ More
We report large negative electron affinity (NEA) on diamond (100) using magnesium adsorption on a previously oxygen-terminated surface. The measured NEA is up to $(-2.01\pm0.05)$ eV, the largest reported negative electron affinity to date. Despite the expected close relationship between the surface chemistry of Mg and Li species on oxygen-terminated diamond, we observe differences in the adsorption properties between the two. Most importantly, a high-temperature annealing step is not required to activate the Mg-adsorbed surface to a state of negative electron affinity. Diamond surfaces prepared by this procedure continue to possess negative electron affinity after exposure to high temperatures, air and even immersion in water.
△ Less
Submitted 20 June, 2015; v1 submitted 24 May, 2015;
originally announced May 2015.
-
Manipulating the orientation of an organic adsorbate on silicon: a NEXAFS study of acetophenone on Si(001)
Authors:
Kane M. O'Donnell,
Oliver Warschkow,
Asif Suleman,
Adam Fahy,
Lars Thomsen,
Steven R. Schofield
Abstract:
We investigate the chemical and structural configuration of acetophenone on Si(001) using synchrotron radiation core-level spectroscopy techniques and density functional theory calculations. Samples were prepared by vapour phase dosing of clean Si(001) surfaces with acetophenone in ultrahigh vacuum. Near edge X-ray adsorption fine structure spectroscopy and photoelectron spectroscopy measurements…
▽ More
We investigate the chemical and structural configuration of acetophenone on Si(001) using synchrotron radiation core-level spectroscopy techniques and density functional theory calculations. Samples were prepared by vapour phase dosing of clean Si(001) surfaces with acetophenone in ultrahigh vacuum. Near edge X-ray adsorption fine structure spectroscopy and photoelectron spectroscopy measurements were made at room temperature as a function of coverage density and post-deposition anneal temperature. We show that the dominant room temperature adsorption structure lies flat on the substrate, while moderate thermal annealing induces the breaking of Si-C bonds between the phenyl ring and the surface resulting in the reorientation of the adsorbate into an upright configuration.
△ Less
Submitted 3 July, 2014;
originally announced July 2014.
-
Continuous quantum nondemolition feedback and unconditional atomic spin squeezing
Authors:
L. K. Thomsen,
S. Mancini,
H. M. Wiseman
Abstract:
We discuss the theory and experimental considerations of a quantum feedback scheme for producing deterministically reproducible spin squeezing. Continuous nondemolition atom number measurement from monitoring a probe field conditionally squeezes the sample. Simultaneous feedback of the measurement results controls the quantum state such that the squeezing becomes unconditional. We find that for…
▽ More
We discuss the theory and experimental considerations of a quantum feedback scheme for producing deterministically reproducible spin squeezing. Continuous nondemolition atom number measurement from monitoring a probe field conditionally squeezes the sample. Simultaneous feedback of the measurement results controls the quantum state such that the squeezing becomes unconditional. We find that for very strong cavity coupling and a limited number of atoms, the theoretical squeezing approaches the Heisenberg limit. Strong squeezing will still be produced at weaker coupling and even in free space (thus presenting a simple experimental test for quantum feedback). The measurement and feedback can be stopped at any time, thereby freezing the sample with a desired amount of squeezing.
△ Less
Submitted 27 August, 2002;
originally announced August 2002.
-
Spin squeezing via quantum feedback
Authors:
L. K. Thomsen,
S. Mancini,
H. M. Wiseman
Abstract:
We propose a quantum feedback scheme for producing deterministically reproducible spin squeezing. The results of a continuous nondemolition atom number measurement are fed back to control the quantum state of the sample. For large samples and strong cavity coupling, the squeezing parameter minimum scales inversely with atom number, approaching the Heisenberg limit. Furthermore, ceasing the measu…
▽ More
We propose a quantum feedback scheme for producing deterministically reproducible spin squeezing. The results of a continuous nondemolition atom number measurement are fed back to control the quantum state of the sample. For large samples and strong cavity coupling, the squeezing parameter minimum scales inversely with atom number, approaching the Heisenberg limit. Furthermore, ceasing the measurement and feedback when this minimum has been reached will leave the sample in the maximally squeezed spin state.
△ Less
Submitted 17 June, 2002; v1 submitted 5 February, 2002;
originally announced February 2002.
-
Atom laser coherence and its control via feedback
Authors:
L. K. Thomsen,
H. M. Wiseman
Abstract:
We present a quantum-mechanical treatment of the coherence properties of a single-mode atom laser. Specifically, we focus on the quantum phase noise of the atomic field as expressed by the first-order coherence function, for which we derive analytical expressions in various regimes. The decay of this function is characterized by the coherence time, or its reciprocal, the linewidth. A crucial con…
▽ More
We present a quantum-mechanical treatment of the coherence properties of a single-mode atom laser. Specifically, we focus on the quantum phase noise of the atomic field as expressed by the first-order coherence function, for which we derive analytical expressions in various regimes. The decay of this function is characterized by the coherence time, or its reciprocal, the linewidth. A crucial contributor to the linewidth is the collisional interaction of the atoms. We find four distinct regimes for the linewidth with increasing interaction strength. These range from the standard laser linewidth, through quadratic and linear regimes, to another constant regime due to quantum revivals of the coherence function. The laser output is only coherent (Bose degenerate) up to the linear regime. However, we show that application of a quantum nondemolition measurement and feedback scheme will increase, by many orders of magnitude, the range of interaction strengths for which it remains coherent.
△ Less
Submitted 17 June, 2002; v1 submitted 5 February, 2002;
originally announced February 2002.
-
Effects of twin-beam squashed light on a three-level atom
Authors:
L. K. Thomsen,
H. M. Wiseman
Abstract:
An electro-optical feedback loop can make in-loop light (squashed light) which produces a photocurrent with noise below the standard quantum limit (such as squeezed light). We investigate the effect of squashed light interacting with a three-level atom in the cascade configuration and compare it to the effects produced by squeezed light and classical noise. It turns out that one master equation…
▽ More
An electro-optical feedback loop can make in-loop light (squashed light) which produces a photocurrent with noise below the standard quantum limit (such as squeezed light). We investigate the effect of squashed light interacting with a three-level atom in the cascade configuration and compare it to the effects produced by squeezed light and classical noise. It turns out that one master equation can be formulated for all three types of light and that this unified formalism can also be applied to the evolution of a two-level atom. We show that squashed light does not mimic all aspects of squeezed light, and in particular, it does not produce the characteristic linear intensity dependence of the population of the upper-most level of the cascade three-level atom. Nevertheless, it has nonclassical transient effects in the de-excitation.
△ Less
Submitted 5 February, 2002; v1 submitted 9 April, 2001;
originally announced April 2001.
-
Reducing the linewidth of an atom laser by feedback
Authors:
H. M. Wiseman,
L. K. Thomsen
Abstract:
A continuous atom laser will almost certainly have a linewidth dominated by the effect of the atomic interaction energy, which turns fluctuations in the condensate atom number into fluctuations in the condensate frequency. These correlated fluctuations mean that information about the atom number could be used to reduce the frequency fluctuations, by controlling a spatially uniform potential. We…
▽ More
A continuous atom laser will almost certainly have a linewidth dominated by the effect of the atomic interaction energy, which turns fluctuations in the condensate atom number into fluctuations in the condensate frequency. These correlated fluctuations mean that information about the atom number could be used to reduce the frequency fluctuations, by controlling a spatially uniform potential. We show that feedback based on a physically reasonable quantum non-demolition measurement of the atom number of the condensate in situ can reduce the linewidth enormously.
△ Less
Submitted 5 February, 2002; v1 submitted 23 January, 2001;
originally announced January 2001.
