Showing 1–50 of 127 results for author: Thoma, M

Experiments and modeling of dust particle heating resulting from changes in polarity switching in the PK-4 microgravity laboratory

Authors: Lori S. McCabe, Jeremiah Williams, Saikat Chakraborty Thakur, Uwe Konopka, Evdokiya Kostadinova, Mikhail Pustylnik, Hubertus Thomas, Markus Thoma, Edward Thomas

Abstract: In the presence of gravity, the micron-sized charged dust particles in a complex (dusty) plasma are compressed into thin layers. However, under the microgravity conditions of the Plasma Kristall-4 (PK-4) experiment on the International Space Station (ISS), the particles fill the plasma, allowing us to investigate the properties of a three-dimensional (3D) multi-particle system. This paper examines… ▽ More In the presence of gravity, the micron-sized charged dust particles in a complex (dusty) plasma are compressed into thin layers. However, under the microgravity conditions of the Plasma Kristall-4 (PK-4) experiment on the International Space Station (ISS), the particles fill the plasma, allowing us to investigate the properties of a three-dimensional (3D) multi-particle system. This paper examines the change in the spatial ordering and thermal state of the particle system created when dust particles are stopped by periodic oscillations of the electric field, known as polarity switching, in a dc glow discharge plasma. Data from the ISS is compared against experiments performed using a ground-based reference version of PK-4 and numerical simulations. Initial results show substantive differences in the velocity distribution functions between experiments on the ground and in microgravity. There are also differences in the motion of the dust cloud, in microgravity there is an expansion of the dust cloud at the application of polarity switching which is not seen in the ground-based experiments. It is proposed that the dust cloud in microgravity gains thermal energy at the application of polarity switching due to this expansion. Simulation results suggest that this may be due to a modification in the effective screening length of the dust at the onset of polarity switching, which arises from a configuration energy between the charged particles. Experimental measurements and simulations show that an extended time (much greater than the Epstein drag decay) is required to dissipate this energy. △ Less

Submitted 7 May, 2025; v1 submitted 21 January, 2025; originally announced January 2025.

Journal ref: Phys. Plasmas 1 May 2025; 32 (5): 053701

Surface Modifications of PCB-Based Plasma Sources Induced by Atmospheric Plasma: A Comparative Study of Dielectric and Electrode Materials

Authors: Jonathan Gail, Alisa Schmidt, Markus H. Thoma

Abstract: The study investigated the effects of atmospheric plasma on various dielectric materials (FR-4, PTFE, Al$_2$O$_3$) and electrode materials (copper, silver, gold-plated copper) used in surface micro-discharge plasma sources. XPS and laser microscopy were used to analyze changes in surface properties and chemical composition after 10 hours of plasma exposure. Al$_2$O$_3$ showed the highest resistanc… ▽ More The study investigated the effects of atmospheric plasma on various dielectric materials (FR-4, PTFE, Al$_2$O$_3$) and electrode materials (copper, silver, gold-plated copper) used in surface micro-discharge plasma sources. XPS and laser microscopy were used to analyze changes in surface properties and chemical composition after 10 hours of plasma exposure. Al$_2$O$_3$ showed the highest resistance, with no significant changes in Al/O ratio or oxidation state. PTFE underwent oxidation, with fluorine substituted by oxygen, forming carbonyl, hydroxyl and aldehyde groups. FR-4 showed the most substantial changes, with etching of the epoxy matrix exposing glass fibers. This was in line with the XPS results, which show a higher O/C-ratio, less epoxy groups and higher nitrogen signals. Silver electrodes were most resilient, with sintered particles redistributed across the Al$_2$O$_3$ surface. Copper and gold-plated copper electrodes were more susceptible to oxidation and degradation, especially in areas exposed to plasma filaments. The results highlight the importance of carefully selecting materials based on resistance to plasma exposure and compatibility with the application. △ Less

Submitted 22 October, 2024; originally announced October 2024.

Particle-resolved study of the onset of turbulence

Authors: Eshita Joshi, Markus H Thoma, Mierk Schwabe

Abstract: The transition from laminar to turbulent flow is an immensely important topic that is still being studied. Here we show that complex plasmas, i.e., microparticles immersed in a low temperature plasma, make it possible to study the particle-resolved onset of turbulence under the influence of damping, a feat not possible with conventional systems. We performed three-dimensional (3D) molecular dynami… ▽ More The transition from laminar to turbulent flow is an immensely important topic that is still being studied. Here we show that complex plasmas, i.e., microparticles immersed in a low temperature plasma, make it possible to study the particle-resolved onset of turbulence under the influence of damping, a feat not possible with conventional systems. We performed three-dimensional (3D) molecular dynamics (MD) simulations of complex plasmas flowing past an obstacle and observed 3D turbulence in the wake and fore-wake region of this obstacle. We found that we could reliably trigger the onset of turbulence by changing key parameters such as the flow speed and particle charge, which can be controlled in experiments, and show that the transition to turbulence follows the conventional pathway involving the intermittent emergence of turbulent puffs. The power spectra for fully developed turbulence in our simulations followed the -5/3 power law of Kolmogorovian turbulence in both time and space. We demonstrate that turbulence in simulations with damping occurs after the formation of shock fronts, such as bow shocks and Mach cones. By reducing the strength of damping in the simulations, we could trigger a transition to turbulence in an undamped system. This work opens the pathway to detailed experimental and simulation studies of the onset of turbulence on the level of the carriers of the turbulent interactions, i.e., the microparticles. △ Less

Submitted 13 June, 2023; originally announced June 2023.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. Research 6, L012013, 2024

A Novel Approach on Dielectric Barrier Discharge using Printed Circuit Boards

Authors: Jonathan Gail, Alisa Schmidt, Markus H. Thoma

Abstract: Drug resistant bacteria, prions and nosocomial infections underline the need of more effective sterilizing technologies. The cold plasma technology is expected to bring a benefit in this context. Six different plasma sources, based on printed circuit boards, were evaluated fourfold. This include measurements of the power consumption, the ignition behavior by an ICCD-camera and ozone formation by a… ▽ More Drug resistant bacteria, prions and nosocomial infections underline the need of more effective sterilizing technologies. The cold plasma technology is expected to bring a benefit in this context. Six different plasma sources, based on printed circuit boards, were evaluated fourfold. This include measurements of the power consumption, the ignition behavior by an ICCD-camera and ozone formation by absorption spectroscopy at 254 nm. To evaluate the biocidal effect, four bacterial test series were performed with Escherichia coli. The entirety of the tests analyze the plasma inactivation process from the input parameters to the desired biocidal effect. The discharge current and time resolved ignition behaviors indicated a simultaneous formation of filaments at the beginning of the negative half-cycle. The dynamics of the ozone production showed a saturated exponential growth upon a maximum value of 435 ppm. Additionally, the microbiological test series unveiled differences between the plasma source concepts. A total reduction rate of Log-4 within a minute was achievable. An air flow through slits within the plasma sources destabilized the plasma. Minor changes of the electrode geometry changed all measured parameters. Hence, to develop a pathogen inactivating plasma source, these results recommend a comb-shaped electrode design, which is laminated on a dielectric. △ Less

Submitted 1 August, 2022; originally announced August 2022.

Influence of Temporal Variations in Plasma Conditions on the Electric Potential Near Self-Organized Dust Chains

Authors: Katrina Vermillion, Dustin L. Sanford, Lorin S. Matthews, Peter Hartmann, Marlene Rosenberg, Evdokiya Kostadinova, Jorge Carmona-Reyes, Truell Hyde, Andrey M. Lipaev, Alexandr D. Usachev, Andrey V. Zobnin, Oleg F. Petrov, Markus H. Thoma, Mikhail Y. Pustilnik, Hubertus M. Thomas, Alexey Ovchinin

Abstract: The self-organization of dust grains into stable filamentary dust structures (or "chains") largely depends on dynamic interactions between the individual charged dust grains and the complex electric potential arising from the distribution of charges within the local plasma environment. Recent studies have shown that the positive column of the gas discharge plasma in the Plasmakristall-4 (PK-4) exp… ▽ More The self-organization of dust grains into stable filamentary dust structures (or "chains") largely depends on dynamic interactions between the individual charged dust grains and the complex electric potential arising from the distribution of charges within the local plasma environment. Recent studies have shown that the positive column of the gas discharge plasma in the Plasmakristall-4 (PK-4) experiment onboard the International Space Station (ISS) supports the presence of fast-moving ionization waves, which lead to variations of plasma parameters by up to an order of magnitude from the average background values. The highly-variable environment resulting from ionization waves may have interesting implications for the dynamics and self-organization of dust particles, particularly concerning the formation and stability of dust chains. Here we investigate the electric potential surrounding dust chains in the PK-4 by employing a molecular dynamics model of the dust and ions with boundary conditions supplied by a Particle-in-Cell with Monte Carlo collisions (PIC-MCC) simulation of the ionization waves. The model is used to examine the effects of the plasma conditions within different regions of the ionization wave and compare the resulting dust structure to that obtained by employing the time-averaged plasma conditions. Comparison between simulated dust chains and experimental data from the PK-4 shows that the time-averaged plasma conditions do not accurately reproduce observed results for dust behavior, indicating that more careful treatment of plasma conditions in the presence of ionization waves is required. It is further shown that commonly used analytic forms of the electric potential do not accurately describe the electric potential near charged dust grains under these plasma conditions. △ Less

Submitted 2 March, 2022; v1 submitted 30 October, 2021; originally announced November 2021.

Comments: 15 pages, 14 figures

Journal ref: Physics of Plasmas Volume 29, Issue 2, 023701 (2022)

Network-Aware Flexibility Requests for Distribution-Level Flexibility Markets

Authors: Eléa Prat, Irena Dukovska, Lars Herre, Rahul Nellikkath, Malte Thoma, Spyros Chatzivasileiadis

Abstract: This paper proposes a method to design network-aware flexibility requests for local flexibility markets. These markets are becoming increasingly important for distribution system operators (DSOs) to ensure grid safety while minimizing costs and public opposition to new network investments. Despite extended recent literature on local flexibility markets, little attention has been paid to quantifyin… ▽ More This paper proposes a method to design network-aware flexibility requests for local flexibility markets. These markets are becoming increasingly important for distribution system operators (DSOs) to ensure grid safety while minimizing costs and public opposition to new network investments. Despite extended recent literature on local flexibility markets, little attention has been paid to quantifying the flexibility required at each location, considering physical network constraints (e.g. line and voltage limits). The method introduced uses a chance-constrained optimization model and a LinDistFlow approximation to consider both physical network constraints and uncertainty caused by renewable production or demand fluctuations. Unlike other methods, it avoids sharing sensitive grid data with the market operator. We compare our approach against a stochastic market-clearing mechanism which serves as a benchmark, and we derive analytical conditions for the performance of our method to determine flexibility requests. We show on two case studies that our method outperforms the stochastic market-clearing benchmark in terms of computation time while achieving comparable social welfare and costs for the DSOs. One of the case studies is conducted on an actual German distribution grid, showing that the proposed method can scale well to real-sized networks. △ Less

Submitted 24 May, 2023; v1 submitted 12 October, 2021; originally announced October 2021.

Cold Atmospheric Plasma Sterilization of FFP3 Face Masks and Long-Term Material Effects

Authors: Alisa Schmidt, Chen-Yon Tobias Tschang, Joachim Sann, Markus H. Thoma

Abstract: The use of cold atmospheric plasmas (CAP) to sterilize sensitive surfaces is an interesting new field of applied plasma physics. Motivated by the shortages of face masks and safety clothing at the beginning of the corona pandemic, we conducted studies on the sterilization of FF3 face masks with CAP and the resulting material effects. Therefore, the bactericidal and sporicidal efficacy of CAP after… ▽ More The use of cold atmospheric plasmas (CAP) to sterilize sensitive surfaces is an interesting new field of applied plasma physics. Motivated by the shortages of face masks and safety clothing at the beginning of the corona pandemic, we conducted studies on the sterilization of FF3 face masks with CAP and the resulting material effects. Therefore, the bactericidal and sporicidal efficacy of CAP afterglow sterilization of FFP3 mask material was investigated by inoculating fabric samples with test germs Escherichia coli (E. coli) and Bacillus atrophaeus (B. atrophaeus) and subsequent CAP afterglow treatment in a surface-micro-discharge (SMD) plasma device. In addition, a detailed analysis of the changes in long-term plasma treated (15h) mask material and its individual components - ethylene vinyl acetate (EVA) and polypropylene (PP) - was carried out using surface analysis methods such as laser microscopy, contact angle measurements, X-ray photoelectron spectroscopy (XPS) as well as fabric permeability and resistance measurements. The experiments showed that E. coli and B. atrophaeus could both be effectively inactivated by plasma treatment in nitrogen mode (12 kVpp, 5 kHz). For B. atrophaeus inactivation of more than 4-log was achieved after 30 minutes. E. coli population could be reduced by 5-log within one minute of CAP treatment and after five minutes a complete inactivation (> 6-log) was achieved. Material analysis showed that long-term (> 5 h) plasma treatment affects the electrostatic properties of the fabric. From this it can be deduced that the plasma treatment of FFP3 face masks with the CAP afterglow of an SMD device effectively inactivates microorganisms on the fabric. FFP3 masks can be plasma decontaminated and reused multiple times but only to a limited extent, as otherwise the permeability levels no longer meet the DIN EN 149 specifications. △ Less

Submitted 7 September, 2021; originally announced September 2021.

Comments: 15 pages, 9 Figures

Effect of ionization waves on dust chain formation in a DC discharge

Authors: L. S. Matthews, K. Vermillion, P. Hartmann, M. Rosenberg, S. Rostami, E. G. Kostadinova, T. W. Hyde, M. Y. Pustylnik, A. M. Lipaev, A. D. Usachev, A. V. Zobnin, M. H. Thoma, O. Petrov, H. M. Thomas, O. V. Novitskii

Abstract: An interesting aspect of complex plasma is its ability to self-organize into a variety of structural configurations and undergo transitions between these states. A striking phenomenon is the isotropic-to-string transition observed in electrorheological complex plasma under the influence of a symmetric ion wakefield. Such transitions have been investigated using the Plasma Kristall-4 (PK-4) microgr… ▽ More An interesting aspect of complex plasma is its ability to self-organize into a variety of structural configurations and undergo transitions between these states. A striking phenomenon is the isotropic-to-string transition observed in electrorheological complex plasma under the influence of a symmetric ion wakefield. Such transitions have been investigated using the Plasma Kristall-4 (PK-4) microgravity laboratory on the International Space Station (ISS). Recent experiments and numerical simulations have shown that, under PK-4 relevant discharge conditions, the seemingly homogeneous DC discharge column is highly inhomogeneous, with large axial electric field oscillations associated with ionization waves occurring on microsecond time scales. A multi-scale numerical model of the dust-plasma interactions is employed to investigate the role of the electric field on the charge of individual dust grains, the ion wakefield, and the order of string-like structures. Results are compared to dust strings formed in similar conditions in the PK-4 experiment. △ Less

Submitted 21 July, 2021; originally announced July 2021.

Comments: 18 pages, 11 figures

Shear flow in a three-dimensional complex plasma in microgravity conditions

Authors: V. Nosenko, M. Pustylnik, M. Rubin-Zuzic, A. M. Lipaev, A. V. Zobnin, A. D. Usachev, H. M. Thomas, M. H. Thoma, V. E. Fortov, O. Kononenko, A. Ovchinin

Abstract: Shear flow in a three-dimensional complex plasma was experimentally studied in microgravity conditions using Plasmakristall-4 (PK-4) instrument on board the International Space Station (ISS). The shear flow was created in an extended suspension of microparticles by applying the radiation pressure force of the manipulation-laser beam. Individual particle trajectories in the flow were analyzed and f… ▽ More Shear flow in a three-dimensional complex plasma was experimentally studied in microgravity conditions using Plasmakristall-4 (PK-4) instrument on board the International Space Station (ISS). The shear flow was created in an extended suspension of microparticles by applying the radiation pressure force of the manipulation-laser beam. Individual particle trajectories in the flow were analyzed and from these, using the Navier-Stokes equation, an upper estimate of the complex plasma's kinematic viscosity was calculated in the range of $0.2$--$6.7~{\rm mm^2/s}$. This estimate is much lower than previously reported in ground-based experiments with 3D complex plasmas. Possible reasons of this difference are discussed. △ Less

Submitted 21 September, 2020; originally announced September 2020.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Research 2, 033404 (2020)

Disalignment rate coefficient of argon $\mathrm{2p_8}$ due to nitrogen collision

Authors: Roman Bergert, Leonard W. Isberner, Slobodan Mitic, Markus H. Thoma

Abstract: Tunable diode laser induced fluorescence (TDLIF) measurements are discussed and quantitatively evaluated for nitrogen admixtures in argon plasma under the influence of a strong magnetic field. TDLIF measurements were used to evaluate light-transport properties in a strongly magnetized optically thick argon/nitrogen plasma under different pressure conditions. Therefore, a coupled system of rate bal… ▽ More Tunable diode laser induced fluorescence (TDLIF) measurements are discussed and quantitatively evaluated for nitrogen admixtures in argon plasma under the influence of a strong magnetic field. TDLIF measurements were used to evaluate light-transport properties in a strongly magnetized optically thick argon/nitrogen plasma under different pressure conditions. Therefore, a coupled system of rate balance equations was constructed to describe laser pumping of individual magnetic sub-levels of $\mathrm{2p_8}$ state through frequency-separated sub-transitions originating from $\mathrm{1s_4}$ magnetic sub-levels. The density distribution (alignment) of $\mathrm{2p_8}$ multiplet was described by balancing laser pumping with losses including radiative decay, transfer of excitation between the neighboring sub-levels in the $\mathrm{2p_8}$ multiplet driven by neutral collisions (argon and nitrogen) and quenching due to electron and neutral collisions. Resulting $\mathrm{2p_8}$ magnetic sub-level densities were then used to model polarization dependent fluorescence, considering self-absorption, which could be directly compared with polarization-resolved TDLIF measurements. This enables to estimate the disalignment rate constant for the $\mathrm{2p_8}$ state due to collisions by molecular nitrogen. A comparison to molecular theory description is given providing satisfactory agreement. The presented measurement method and model can help to describe optical emission of argon and argon-nitrogen admixtures in magnetized conditions and provides a basis for further description of optical emission spectra in magnetized plasmas. △ Less

Submitted 19 August, 2020; originally announced August 2020.

Comments: 15 pages , 8 figures

Rotational properties of annulus dusty plasma in a strong magnetic field

Authors: Mangilal Choudhary, Roman Bergert, Sandra Moritz, Slobodan Mitic, Markus H. Thoma

Abstract: The collective dynamics of annulus dusty plasma formed between a co-centric conducting (non-conducting) disk and ring configuration is studied in a strongly magnetized radio-frequency (rf) discharge. A superconducting electromagnet is used to introduce a homogeneous magnetic field to the dusty plasma medium. In absence of the magnetic field, dust grains exhibit thermal motion around their equilibr… ▽ More The collective dynamics of annulus dusty plasma formed between a co-centric conducting (non-conducting) disk and ring configuration is studied in a strongly magnetized radio-frequency (rf) discharge. A superconducting electromagnet is used to introduce a homogeneous magnetic field to the dusty plasma medium. In absence of the magnetic field, dust grains exhibit thermal motion around their equilibrium position. The dust grains start to rotate in anticlockwise direction with increasing magnetic field (B $>$ 0.02 T), and the constant value of the angular frequency at various strengths of magnetic field confirms the rigid body rotation. The angular frequency of dust grains linearly increases up to a threshold magnetic field (B $>$ 0.6 T) and after that its value remains nearly constant in a certain range of magnetic field. Further increase in magnetic field (B $>$ 1 T) lowers the angular frequency. Low value of angular frequency is expected by reducing the width of annulus dusty plasma or the input rf power. The azimuthal ion drag force due to the magnetic field is assumed to be the energy source which drives the rotational motion. The resultant radial electric field in the presence of magnetic field determines the direction of rotation. The variation of floating (plasma) potential across the annular region at given magnetic field explains the rotational properties of the annulus dusty plasma in the presence of magnetic field. △ Less

Submitted 21 June, 2020; originally announced June 2020.

Comments: 10,9

Three-dimensional structure of a string-fluid complex plasma

Authors: M. Y. Pustylnik, B. Klumov, M. Rubin-Zuzic, A. M. Lipaev, V. Nosenko, D. Erdle, A. D. Usachev, A. V. Zobnin, V. I. Molotkov, G. Joyce, H. M. Thomas, M. H. Thoma, O. F. Petrov, V. E. Fortov, O. Kononenko

Abstract: Three-dimensional structure of complex (dusty) plasmas was investigated under long-term microgravity conditions in the International-Space-Station-based Plasmakristall-4 facility. The microparticle suspensions were confined in a polarity-switched dc discharge. The experimental results were compared to the results of the molecular dynamics simulations with the interparticle interaction potential re… ▽ More Three-dimensional structure of complex (dusty) plasmas was investigated under long-term microgravity conditions in the International-Space-Station-based Plasmakristall-4 facility. The microparticle suspensions were confined in a polarity-switched dc discharge. The experimental results were compared to the results of the molecular dynamics simulations with the interparticle interaction potential represented as a superposition of isotropic Yukawa and anisotropic quadrupole terms. Both simulated and experimental data exhibited qualitatively similar structural features indicating the bulk liquid-like order with the inclusion of solid-like strings aligned with the axial electric field. Individual strings were identified and their size spectrum was calculated. The decay rate of the size spectrum was found to decrease with the enhancement of string-like structural features. △ Less

Submitted 11 May, 2020; v1 submitted 6 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Research 2, 033314 (2020)

Quantitative evaluation of laser-induced fluorescence in magnetized plasma accounting for disalignment effect

Authors: Roman Bergert, Slobodan Mitic, Markus H. Thoma

Abstract: Quantitative evaluation of tunable diode laser induced fluorescence (TDLIF) measurements in magnetized plasma take into account Zeeman splitting of energetic levels and intra-multiplet mixing defining the density distribution (alignment) of excited $\mathrm{2p_8}$ multiplet is discussed in this paper. TDLIF measurements were used to evaluate light-transport properties in a strongly magnetized opti… ▽ More Quantitative evaluation of tunable diode laser induced fluorescence (TDLIF) measurements in magnetized plasma take into account Zeeman splitting of energetic levels and intra-multiplet mixing defining the density distribution (alignment) of excited $\mathrm{2p_8}$ multiplet is discussed in this paper. TDLIF measurements were used to evaluate light-transport properties in a strongly magnetized optically thick argon plasma under different pressure conditions. Therefore, a coupled system of rate balance equations were constructed to describe laser pumping of individual magnetic sub-levels of $\mathrm{2p_8}$ state through frequency separated sub-transitions originating from $\mathrm{1s_4}$ magnetic sub-levels. The density distribution of $\mathrm{2p_8}$ multiplet was described by balancing laser pumping with losses including radiative decay, transfer of excitation between the neighboring multiplets driven by neutral collisions and quenching due to electron and neutral collisions. Resulting $\mathrm{2p_8}$ magnetic sub-level densities were then used to model polarization dependent fluorescence, consider self-absorption, which could be directly compared with measured polarization resolved TDLIF measurements. This enables to obtain unique solutions for the $\mathrm{1s_4}$ and $\mathrm{1s_5}$ magnetic sub-level densities which were in good agreement with the densities obtained by laser absorption measurements. It is shown that LIF measurements in magnetized plasma conditions have strong pressure dependence that should be corrected consider effective disalignment rate. The presented measurement method and model can help further understanding and improve description of optical emission of argon in magnetized conditions. △ Less

Submitted 1 May, 2020; v1 submitted 21 February, 2020; originally announced February 2020.

Comments: 15 pages, 10 fugures

Surface Modifications Caused by Cold Atmospheric Plasma Sterilization Treatment

Authors: Sandra Moritz, Alisa Schmidt, Joachim Sann, M. H. Thoma

Abstract: Inactivation of microorganisms on sensitive surfaces by cold atmospheric plasma (CAP) is one major application in the field of plasma medicine because it provides a simple and effective way to sterilize heat-sensitive materials. Therefore, one has to know whether plasma treatment affects the treated surfaces, and thus causes long-term surface modifications. In this contribution, the effect of cold… ▽ More Inactivation of microorganisms on sensitive surfaces by cold atmospheric plasma (CAP) is one major application in the field of plasma medicine because it provides a simple and effective way to sterilize heat-sensitive materials. Therefore, one has to know whether plasma treatment affects the treated surfaces, and thus causes long-term surface modifications. In this contribution, the effect of cold atmospheric Surface Micro-Discharge (SMD) plasma on different materials and its sporicidal behavior was investigated. Hence, different material samples (stainless steel, different polymers and glass) were plasma-treated for 16 hours, simulating multiple plasma treatments using an SMD plasma device. Afterwards, the material samples were analyzed using surface analysis methods such as laser microscopy, contact angle measurements and X-ray photoelectron spectroscopy (XPS). Furthermore, the device was used to investigate the behavior of Bacillus atrophaeus endospores inoculated on material samples at different treatment times. The interaction results for plasma-treated endospores show, that a log reduction of the spore count between 4.3 and 6.2 can be achieved within 15 min of plasma treatment. Besides, the surface analysis revealed, that there were three different types of reactions the probed materials showed to plasma treatment, ranging from no changes to shifts of the materials' free surface energies and oxidation. As a consequence, it should be taken into account that even though cold atmospheric plasma treatment is a non-thermal method to inactivate microorganisms on heatsensitive materials, it still affects surface properties of the treated materials. Therefore, the focus of future work must be a further classification of plasma-caused material modifications. △ Less

Submitted 10 February, 2020; originally announced February 2020.

Comments: 14 pages, 15 figures

Particle charge in PK-4 dc discharge from ground-based and microgravity experiments

Authors: T. Antonova, S. A. Khrapak, M. Y. Pustylnik, M. Rubin-Zuzic, H. M. Thomas, A. M. Lipaev, A. D. Usachev, V. I. Molotkov, M. H. Thoma

Abstract: The charge of microparticles immersed in the dc discharge of the Plasmakristall-4 experimental facility has been estimated using the particle velocities from experiments performed on Earth and under microgravity conditions on the International Space Station. The theoretical model used for these estimates is based on the balance of the forces acting on a single particle in the discharge. The model… ▽ More The charge of microparticles immersed in the dc discharge of the Plasmakristall-4 experimental facility has been estimated using the particle velocities from experiments performed on Earth and under microgravity conditions on the International Space Station. The theoretical model used for these estimates is based on the balance of the forces acting on a single particle in the discharge. The model takes into account the radial dependence of the discharge parameters and describes reasonably well the experimental measurements. △ Less

Submitted 13 November, 2019; originally announced November 2019.

Comments: 6 pages, 5 figures, published in Phys. Plasmas

Journal ref: Physics of Plasmas 26, 113703 (2019)

3-Dimensional Dusty Plasma in a Strong Magnetic Field: Observation of Rotating Dust Tori

Authors: Mangilal Choudhary, Roman Bergert, Slobodan Mitic, Markus H. Thoma

Abstract: The paper reports on the dynamics of a 3-dimensional dusty plasma in a strong magnetic field. An electrostatic potential well created by a conducting or non-conducting ring in the rf discharge confines the charged dust particles. In the absence of the magnetic field, dust grains exhibit a thermal motion about their equilibrium position. As the magnetic field crosses a threshold value (B $>$ 0.02 T… ▽ More The paper reports on the dynamics of a 3-dimensional dusty plasma in a strong magnetic field. An electrostatic potential well created by a conducting or non-conducting ring in the rf discharge confines the charged dust particles. In the absence of the magnetic field, dust grains exhibit a thermal motion about their equilibrium position. As the magnetic field crosses a threshold value (B $>$ 0.02 T), the edge particles start to rotate and form a vortex in the vertical plane. At the same time, the central region particles either exhibit thermal motion or $\vec{E} \times \vec{B}$ motion in the horizontal plane. At B $>$ 0.15 T, the central region dust grains start to rotate in the opposite direction resulting in a pair of counter-rotating vortices in the vertical plane. The characteristics of the vortex pair change with increasing the strength of the magnetic field (B $\sim$ 0.8 T). At B $>$ 0.8 T, dust grains exhibit very complex motion in the rotating torus. The angular frequency variation of rotating particles indicates a differential or sheared dust rotation in a vortex. The angular frequency increases with increasing the magnetic field from 0.05 T to 0.8 T. The ion drag force and dust charge gradient along with the E-field are considered as possible energy sources for driving the edge vortex flow and central region vortex motion, respectively. The directions of rotation also confirm the different energy sources responsible for the vortex motion. △ Less

Submitted 7 May, 2020; v1 submitted 17 October, 2019; originally announced October 2019.

Comments: 14,13

Influence of External Magnetic Field on Dust$-$Acoustic Waves in a Capacitive RF Discharge

Authors: Mangilal Choudhary, Roman Bergert, Slobodan Mitic, Markus H. Thoma

Abstract: This paper reports experiments on self$-$excited dust acoustic waves (DAWs) and its propagation characteristics in a magnetized rf discharge plasma. The DAWs are spontaneously excited in dusty plasma after adding more particles in the confining potential well and found to propagate in the direction of streaming ions. The spontaneous excitation of such low-frequency modes is possible due to the ins… ▽ More This paper reports experiments on self$-$excited dust acoustic waves (DAWs) and its propagation characteristics in a magnetized rf discharge plasma. The DAWs are spontaneously excited in dusty plasma after adding more particles in the confining potential well and found to propagate in the direction of streaming ions. The spontaneous excitation of such low-frequency modes is possible due to the instabilities associated with streaming ions through the dust grain medium. The background E-field and neutral pressure determine the stability of excited DAWs. The characteristics of DAWs strongly depend on the strength of external magnetic field. The magnetic field of strength B $<$ 0.05 T only modifies the characteristics of propagating waves in dusty plasma at moderate power and pressure, P = 3.5 W and p = 27 Pa respectively. It is found that DAWs start to be damped with increasing the magnetic field beyond B $>$ 0.05 T and get completely damped at higher magnetic field B $\sim$ 0.13 T. After lowering the power and pressure to 3 W and 23 Pa respectively, the excited DAWs in the absence of B are slightly unstable. In this case, the magnetic field only stabilizes and modifies the propagation characteristics of DAWs while the strength of B is increased up to 0.1 T or even higher. The modification of the sheath electric field where particles are confined in the presence of the external magnetic field is the main cause of the modification and damping of the DAWs in a magnetized rf discharge plasma. △ Less

Submitted 29 September, 2019; v1 submitted 14 June, 2019; originally announced June 2019.

Comments: 9,6

Comparative Study of the Surface Potential of Magnetic and Non-magnetic Spherical Objects in a Magnetized RF Discharge Plasma

Authors: Mangilal Choudhary, Roman Berger, Slobodan Mitic, Markus H. Thoma

Abstract: We report measurements of the time-averaged surface floating potential of magnetic and non-magnetic spherical probes (or large dust particles) immersed in a magnetized capacitively coupled discharge. In this study, the size of the spherical probes is taken greater than the Debye length. The surface potential of a spherical probe first increases, i.e. becomes more negative at low magnetic field (B… ▽ More We report measurements of the time-averaged surface floating potential of magnetic and non-magnetic spherical probes (or large dust particles) immersed in a magnetized capacitively coupled discharge. In this study, the size of the spherical probes is taken greater than the Debye length. The surface potential of a spherical probe first increases, i.e. becomes more negative at low magnetic field (B $<$ 0.05 T), attains a maximum value and decreases with further increase of the magnetic field strength (B $>$ 0.05 T). The rate of change of the surface potential in the presence of a B-field mainly depends on the background plasma and types of material of the objects. The results show that the surface potential of the magnetic sphere is higher (more negative) compared to the non-magnetic spherical probe. Hence, the smaller magnetic sphere collects more negative charges on its surface than a bigger non-magnetic sphere in a magnetized plasma. The different sized spherical probes have nearly the same surface potential above a threshold magnetic field (B $>$ 0.03 T), implicating a smaller role of size dependence on the surface potential of spherical objects. The variation of the surface potential of the spherical probes is understood on the basis of a modification of the collection currents to their surface due to charge confinement and cross-field diffusion in the presence of an external magnetic field. △ Less

Submitted 21 August, 2020; v1 submitted 30 January, 2019; originally announced January 2019.

Comments: 13,10 figures

Dust density waves in a dc flowing complex plasma with discharge polarity reversal

Authors: S. Jaiswal, M. Y. Pustylnik, S. Zhdanov, H. M. Thomas, A. M. Lipaev, A. D. Usachev, V. I. Molotkov, V. E. Fortov, M. H. Thoma, O. V. Novitskii

Abstract: We report on the observation of the self-excited dust density waves in the dc discharge complex plasma. The experiments were performed under microgravity conditions in the Plasmakristall-4 facility on board the International Space Station. In the experiment, the microparticle cloud was first trapped in an inductively coupled plasma, then released to drift for some seconds in a dc discharge with co… ▽ More We report on the observation of the self-excited dust density waves in the dc discharge complex plasma. The experiments were performed under microgravity conditions in the Plasmakristall-4 facility on board the International Space Station. In the experiment, the microparticle cloud was first trapped in an inductively coupled plasma, then released to drift for some seconds in a dc discharge with constant current. After that the discharge polarity was reversed. DC plasma containing a drifting microparticle cloud was found to be strongly non-uniform in terms of microparticle drift velocity and plasma emission in accord with [Zobnin et.al., Phys. Plasmas 25, 033702 (2018)]. In addition to that, non-uniformity in the self-excited wave pattern was observed: In the front edge of the microparticle cloud (defined as head), the waves had larger phase velocity than in the rear edge (defined as tail). Also, after the polarity reversal, the wave pattern exhibited several bifurcations: Between each of the two old wave crests, a new wave crest has formed. These bifurcations, however, occurred only in the head of the microparticle cloud. We show that spatial variations of electric field inside the drifting cloud play an important role in the formation of the wave pattern. Comparison of the theoretical estimations and measurements demonstrate the significant impact of the electric field on the phase velocity of the wave. The same theoretical approach applied to the instability growth rate, showed agreement between estimated and measured values. △ Less

Submitted 11 July, 2018; v1 submitted 18 May, 2018; originally announced May 2018.

Comments: 7 pages, 4 figures

Comparative evaluation of instrument segmentation and tracking methods in minimally invasive surgery

Authors: Sebastian Bodenstedt, Max Allan, Anthony Agustinos, Xiaofei Du, Luis Garcia-Peraza-Herrera, Hannes Kenngott, Thomas Kurmann, Beat Müller-Stich, Sebastien Ourselin, Daniil Pakhomov, Raphael Sznitman, Marvin Teichmann, Martin Thoma, Tom Vercauteren, Sandrine Voros, Martin Wagner, Pamela Wochner, Lena Maier-Hein, Danail Stoyanov, Stefanie Speidel

Abstract: Intraoperative segmentation and tracking of minimally invasive instruments is a prerequisite for computer- and robotic-assisted surgery. Since additional hardware like tracking systems or the robot encoders are cumbersome and lack accuracy, surgical vision is evolving as promising techniques to segment and track the instruments using only the endoscopic images. However, what is missing so far are… ▽ More Intraoperative segmentation and tracking of minimally invasive instruments is a prerequisite for computer- and robotic-assisted surgery. Since additional hardware like tracking systems or the robot encoders are cumbersome and lack accuracy, surgical vision is evolving as promising techniques to segment and track the instruments using only the endoscopic images. However, what is missing so far are common image data sets for consistent evaluation and benchmarking of algorithms against each other. The paper presents a comparative validation study of different vision-based methods for instrument segmentation and tracking in the context of robotic as well as conventional laparoscopic surgery. The contribution of the paper is twofold: we introduce a comprehensive validation data set that was provided to the study participants and present the results of the comparative validation study. Based on the results of the validation study, we arrive at the conclusion that modern deep learning approaches outperform other methods in instrument segmentation tasks, but the results are still not perfect. Furthermore, we show that merging results from different methods actually significantly increases accuracy in comparison to the best stand-alone method. On the other hand, the results of the instrument tracking task show that this is still an open challenge, especially during challenging scenarios in conventional laparoscopic surgery. △ Less

Submitted 7 May, 2018; originally announced May 2018.

The WiLI benchmark dataset for written language identification

Authors: Martin Thoma

Abstract: This paper describes the WiLI-2018 benchmark dataset for monolingual written natural language identification. WiLI-2018 is a publicly available, free of charge dataset of short text extracts from Wikipedia. It contains 1000 paragraphs of 235 languages, totaling in 23500 paragraphs. WiLI is a classification dataset: Given an unknown paragraph written in one dominant language, it has to be decided w… ▽ More This paper describes the WiLI-2018 benchmark dataset for monolingual written natural language identification. WiLI-2018 is a publicly available, free of charge dataset of short text extracts from Wikipedia. It contains 1000 paragraphs of 235 languages, totaling in 23500 paragraphs. WiLI is a classification dataset: Given an unknown paragraph written in one dominant language, it has to be decided which language it is. △ Less

Submitted 23 January, 2018; originally announced January 2018.

Comments: {"pages": 12, "figures": 4, "language": "English", "author-ORCiD": ["https://orcid.org/0000-0002-6517-1690"]}

Cautionary note on "Semiparametric modeling of grouped current duration data with preferential reporting'"

Authors: Alexander C. McLain, Rajeshwari Sundaram, Marie Thoma, Germaine M. Buck Louis

Abstract: This report is designed to clarify a few points about the article "Semiparametric modeling of grouped current duration data with preferential reporting" by McLain, Sundaram, Thoma and Louis in Statistics in Medicine (McLain et al., 2014, hereafter MSTL) regarding using the methods under right censoring. In simulation studies, it has been found that bias can occur when right censoring is present. C… ▽ More This report is designed to clarify a few points about the article "Semiparametric modeling of grouped current duration data with preferential reporting" by McLain, Sundaram, Thoma and Louis in Statistics in Medicine (McLain et al., 2014, hereafter MSTL) regarding using the methods under right censoring. In simulation studies, it has been found that bias can occur when right censoring is present. Current duration data normally does not have censored values, but censoring can be induced at a value, say tau, after which the data values are thought to be unreliable. As noted in MSTL, some right censored data require an assumption on the parametric form of the data beyond τ. While this assumption was given in MSTL, the implications of the assumption were not sufficiently explored. Here we present simulations and evaluate the methods of MSTL under type I censoring, give some settings under which the method works well even in presence of censoring, state when the model is correctly specified and discuss the reasons of the bias. △ Less

Submitted 2 January, 2018; originally announced January 2018.

Comments: 7 pages

MSC Class: 62N01

The role of frequency dependence in dynamical gap generation in graphene

Authors: M. E. Carrington, C. S. Fischer, L. von Smekal, M. H. Thoma

Abstract: We study the frequency dependencies of the fermion and photon dressing functions in dynamical gap generation in graphene. We use a low energy effective QED-like description, but within this approximation, we include all frequency dependent effects including retardation. We obtain the critical coupling by calculating the gap using a non-perturbative Dyson-Schwinger approach. Compared to the results… ▽ More We study the frequency dependencies of the fermion and photon dressing functions in dynamical gap generation in graphene. We use a low energy effective QED-like description, but within this approximation, we include all frequency dependent effects including retardation. We obtain the critical coupling by calculating the gap using a non-perturbative Dyson-Schwinger approach. Compared to the results of our previous calculation [1] which used a Lindhard screening approximation instead of including a self-consistently calculated dynamical screening function, the critical coupling is substantially reduced. △ Less

Submitted 8 March, 2018; v1 submitted 3 November, 2017; originally announced November 2017.

Comments: 13 pages, 5 figures, published version

Journal ref: Phys. Rev. B 97, 115411 (2018)

Testing for Feature Relevance: The HARVEST Algorithm

Authors: Herbert Weisberg, Victor Pontes, Mathis Thoma

Abstract: Feature selection with high-dimensional data and a very small proportion of relevant features poses a severe challenge to standard statistical methods. We have developed a new approach (HARVEST) that is straightforward to apply, albeit somewhat computer-intensive. This algorithm can be used to pre-screen a large number of features to identify those that are potentially useful. The basic idea is to… ▽ More Feature selection with high-dimensional data and a very small proportion of relevant features poses a severe challenge to standard statistical methods. We have developed a new approach (HARVEST) that is straightforward to apply, albeit somewhat computer-intensive. This algorithm can be used to pre-screen a large number of features to identify those that are potentially useful. The basic idea is to evaluate each feature in the context of many random subsets of other features. HARVEST is predicated on the assumption that an irrelevant feature can add no real predictive value, regardless of which other features are included in the subset. Motivated by this idea, we have derived a simple statistical test for feature relevance. Empirical analyses and simulations produced so far indicate that the HARVEST algorithm is highly effective in predictive analytics, both in science and business. △ Less

Submitted 27 February, 2018; v1 submitted 30 September, 2017; originally announced October 2017.

Comments: 22 pages, 2 tables

Analysis and Optimization of Convolutional Neural Network Architectures

Authors: Martin Thoma

Abstract: Convolutional Neural Networks (CNNs) dominate various computer vision tasks since Alex Krizhevsky showed that they can be trained effectively and reduced the top-5 error from 26.2 % to 15.3 % on the ImageNet large scale visual recognition challenge. Many aspects of CNNs are examined in various publications, but literature about the analysis and construction of neural network architectures is rare.… ▽ More Convolutional Neural Networks (CNNs) dominate various computer vision tasks since Alex Krizhevsky showed that they can be trained effectively and reduced the top-5 error from 26.2 % to 15.3 % on the ImageNet large scale visual recognition challenge. Many aspects of CNNs are examined in various publications, but literature about the analysis and construction of neural network architectures is rare. This work is one step to close this gap. A comprehensive overview over existing techniques for CNN analysis and topology construction is provided. A novel way to visualize classification errors with confusion matrices was developed. Based on this method, hierarchical classifiers are described and evaluated. Additionally, some results are confirmed and quantified for CIFAR-100. For example, the positive impact of smaller batch sizes, averaging ensembles, data augmentation and test-time transformations on the accuracy. Other results, such as the positive impact of learned color transformation on the test accuracy could not be confirmed. A model which has only one million learned parameters for an input size of 32x32x3 and 100 classes and which beats the state of the art on the benchmark dataset Asirra, GTSRB, HASYv2 and STL-10 was developed. △ Less

Submitted 31 July, 2017; originally announced July 2017.

Comments: Master's thesis. 73 pages + 24 pages appendix; 39 figures; 33 tables

The HASYv2 dataset

Authors: Martin Thoma

Abstract: This paper describes the HASYv2 dataset. HASY is a publicly available, free of charge dataset of single symbols similar to MNIST. It contains 168233 instances of 369 classes. HASY contains two challenges: A classification challenge with 10 pre-defined folds for 10-fold cross-validation and a verification challenge. This paper describes the HASYv2 dataset. HASY is a publicly available, free of charge dataset of single symbols similar to MNIST. It contains 168233 instances of 369 classes. HASY contains two challenges: A classification challenge with 10 pre-defined folds for 10-fold cross-validation and a verification challenge. △ Less

Submitted 29 January, 2017; originally announced January 2017.

Dynamical gap generation in graphene with frequency dependent renormalization effects

Authors: M. E. Carrington, C. S. Fischer, L. von Smekal, M. H. Thoma

Abstract: We study the frequency dependencies in the renormalization of the fermion Greens function for the $π$-band electrons in graphene and their influence on the dynamical gap generation at sufficiently strong interaction. Adopting the effective QED-like description for the low-energy excitations within the Dirac-cone region we self consistently solve the fermion Dyson-Schwinger equation in various appr… ▽ More We study the frequency dependencies in the renormalization of the fermion Greens function for the $π$-band electrons in graphene and their influence on the dynamical gap generation at sufficiently strong interaction. Adopting the effective QED-like description for the low-energy excitations within the Dirac-cone region we self consistently solve the fermion Dyson-Schwinger equation in various approximations for the photon propagator and the vertex function with special emphasis on frequency dependent Lindhard screening and retardation effects. △ Less

Submitted 5 May, 2016; originally announced May 2016.

Comments: 19 pages, 5 figures

Journal ref: Phys. Rev. B 94, 125102 (2016)

A Survey of Semantic Segmentation

Authors: Martin Thoma

Abstract: This survey gives an overview over different techniques used for pixel-level semantic segmentation. Metrics and datasets for the evaluation of segmentation algorithms and traditional approaches for segmentation such as unsupervised methods, Decision Forests and SVMs are described and pointers to the relevant papers are given. Recently published approaches with convolutional neural networks are men… ▽ More This survey gives an overview over different techniques used for pixel-level semantic segmentation. Metrics and datasets for the evaluation of segmentation algorithms and traditional approaches for segmentation such as unsupervised methods, Decision Forests and SVMs are described and pointers to the relevant papers are given. Recently published approaches with convolutional neural networks are mentioned and typical problematic situations for segmentation algorithms are examined. A taxonomy of segmentation algorithms is given. △ Less

Submitted 11 May, 2016; v1 submitted 21 February, 2016; originally announced February 2016.

Comments: Fixed typo in accuracy metrics formula; added value range of accuracy metrics; consistent naming of variables

Creativity in Machine Learning

Authors: Martin Thoma

Abstract: Recent machine learning techniques can be modified to produce creative results. Those results did not exist before; it is not a trivial combination of the data which was fed into the machine learning system. The obtained results come in multiple forms: As images, as text and as audio. This paper gives a high level overview of how they are created and gives some examples. It is meant to be a summ… ▽ More Recent machine learning techniques can be modified to produce creative results. Those results did not exist before; it is not a trivial combination of the data which was fed into the machine learning system. The obtained results come in multiple forms: As images, as text and as audio. This paper gives a high level overview of how they are created and gives some examples. It is meant to be a summary of the current work and give people who are new to machine learning some starting points. △ Less

Submitted 12 January, 2016; originally announced January 2016.

Comments: 5 pages, 4 figures

Über die Klassifizierung von Knoten in dynamischen Netzwerken mit Inhalt

Authors: Martin Thoma

Abstract: This paper explains the DYCOS-Algorithm as it was introduced in by Aggarwal and Li in 2011. It operates on graphs whichs nodes are partially labeled and automatically adds missing labels to nodes. To do so, the DYCOS algorithm makes use of the structure of the graph as well as content which is assigned to the node. Aggarwal and Li measured in an experimental analysis that DYCOS adds the missing la… ▽ More This paper explains the DYCOS-Algorithm as it was introduced in by Aggarwal and Li in 2011. It operates on graphs whichs nodes are partially labeled and automatically adds missing labels to nodes. To do so, the DYCOS algorithm makes use of the structure of the graph as well as content which is assigned to the node. Aggarwal and Li measured in an experimental analysis that DYCOS adds the missing labels to a Graph with 19396 nodes of which 14814 are labeled and another Graph with 806635 nodes of which 18999 are labeld on one core of an Intel Xeon 2.5 GHz CPU with 32 G RAM within less than a minute. Additionally, extensions of the DYCOS algorithm are proposed. ----- In dieser Arbeit wird der DYCOS-Algorithmus, wie er 2011 von Aggarwal und Li vorgestellt wurde, erklärt. Er arbeitet auf Graphen, deren Knoten teilweise mit Beschriftungen versehen sind und ergänzt automatisch Beschriftungen für Knoten, die bisher noch keine Beschriftung haben. Dieser Vorgang wird "Klassifizierung" genannt. Dazu verwendet er die Struktur des Graphen sowie textuelle Informationen, die den Knoten zugeordnet sind. Die von Aggarwal und Li beschriebene experimentelle Analyse ergab, dass er auch auf dynamischen Graphen mit 19396 bzw. 806635 Knoten, von denen nur 14814 bzw. 18999 beschriftet waren, innerhalb von weniger als einer Minute auf einem Kern einer Intel Xeon 2.5 GHz CPU mit 32 G RAM ausgeführt werden kann. Zusätzlich wird die Veröffentlichung von Aggarwal und Li kritisch erörtert und und es werden mögliche Erweiterungen des DYCOS-Algorithmus vorgeschlagen. △ Less

Submitted 23 November, 2015; originally announced December 2015.

Comments: in German. This term paper was handed in on 17.01.2014

On-line Recognition of Handwritten Mathematical Symbols

Authors: Martin Thoma

Abstract: Finding the name of an unknown symbol is often hard, but writing the symbol is easy. This bachelor's thesis presents multiple systems that use the pen trajectory to classify handwritten symbols. Five preprocessing steps, one data augmentation algorithm, five features and five variants for multilayer Perceptron training were evaluated using 166898 recordings which were collected with two crowdsourc… ▽ More Finding the name of an unknown symbol is often hard, but writing the symbol is easy. This bachelor's thesis presents multiple systems that use the pen trajectory to classify handwritten symbols. Five preprocessing steps, one data augmentation algorithm, five features and five variants for multilayer Perceptron training were evaluated using 166898 recordings which were collected with two crowdsourcing projects. The evaluation results of these 21 experiments were used to create an optimized recognizer which has a TOP1 error of less than 17.5% and a TOP3 error of 4.0%. This is an improvement of 18.5% for the TOP1 error and 29.7% for the TOP3 error. △ Less

Submitted 29 November, 2015; originally announced November 2015.

Pixel-wise Segmentation of Street with Neural Networks

Authors: Sebastian Bittel, Vitali Kaiser, Marvin Teichmann, Martin Thoma

Abstract: Pixel-wise street segmentation of photographs taken from a drivers perspective is important for self-driving cars and can also support other object recognition tasks. A framework called SST was developed to examine the accuracy and execution time of different neural networks. The best neural network achieved an $F_1$-score of 89.5% with a simple feedforward neural network which trained to solve a… ▽ More Pixel-wise street segmentation of photographs taken from a drivers perspective is important for self-driving cars and can also support other object recognition tasks. A framework called SST was developed to examine the accuracy and execution time of different neural networks. The best neural network achieved an $F_1$-score of 89.5% with a simple feedforward neural network which trained to solve a regression task. △ Less

Submitted 2 November, 2015; originally announced November 2015.

Autowaves in a dc complex plasma confined behind a de Laval nozzle

Authors: M. A. Fink, S. K. Zhdanov, M. Schwabe, M. H. Thoma, H. Höfner, H. M. Thomas, G. E. Morfill

Abstract: Experiments to explore stability conditions and topology of a dense microparticle cloud supported against gravity by a gas flow were carried out. By using a nozzle shaped glass insert within the glass tube of a dc discharge plasma chamber a weakly ionized gas flow through a de Laval nozzle was produced. The experiments were performed using neon gas at a pressure of 100 Pa and melamine-formaldehyde… ▽ More Experiments to explore stability conditions and topology of a dense microparticle cloud supported against gravity by a gas flow were carried out. By using a nozzle shaped glass insert within the glass tube of a dc discharge plasma chamber a weakly ionized gas flow through a de Laval nozzle was produced. The experiments were performed using neon gas at a pressure of 100 Pa and melamine-formaldehyde particles with a diameter of 3.43 μm. The capturing and stable global confining of the particles behind the nozzle in the plasma were demonstrated. The particles inside the cloud behaved as a single convection cell inhomogeneously structured along the nozzle axis in a tube-like manner. The pulsed acceleration localized in the very head of the cloud mediated by collective plasma-particle interactions and the resulting wave pattern were studied in detail. △ Less

Submitted 10 July, 2013; originally announced July 2013.

Comments: 6 pages, 4 figures

Journal ref: EPL, 102 (2013) 45001

Particle flows in a dc discharge in laboratory and microgravity conditions

Authors: S. A. Khrapak, M. H. Thoma, M. Chaudhuri, G. E. Morfill, A. V. Zobnin, A. D. Usachev, O. F. Petrov, V. E. Fortov

Abstract: We describe a series of experiments on dust particles flows in a positive column of a horizontal dc discharge operating in laboratory and microgravity conditions. The main observation is that the particle flow velocities in laboratory experiments are systematically higher than in microgravity experiments, for otherwise identical discharge conditions. The paper provides an explanation for this inte… ▽ More We describe a series of experiments on dust particles flows in a positive column of a horizontal dc discharge operating in laboratory and microgravity conditions. The main observation is that the particle flow velocities in laboratory experiments are systematically higher than in microgravity experiments, for otherwise identical discharge conditions. The paper provides an explanation for this interesting and unexpected observation. The explanation is based on a physical model, which properly takes into account main plasma-particle interaction mechanisms relevant to the described experimental study. Comparison of experimentally measured particle velocities and those calculated using the proposed model demonstrates reasonable agreement, both in laboratory and microgravity conditions, in the entire range of discharge parameters investigated. △ Less

Submitted 9 April, 2013; originally announced April 2013.

Comments: 9 pages, 7 figures

Journal ref: Physical Review E 87, 063109 (2013)

Screening Masses in Gluonic Plasma

Authors: Purnendu Chakraborty, Munshi G. Mustafa, Markus H. Thoma

Abstract: Both electric and magnetic screening masses in a nonperturbative gluonic background are investigated using operator product expansion. The magnetic screening mass is found to agree with lattice results whereas the electric screening mass is somewhat smaller than the one found on the lattice. Both electric and magnetic screening masses in a nonperturbative gluonic background are investigated using operator product expansion. The magnetic screening mass is found to agree with lattice results whereas the electric screening mass is somewhat smaller than the one found on the lattice. △ Less

Submitted 31 January, 2012; v1 submitted 9 September, 2011; originally announced September 2011.

Comments: Accepted in PRD

Conserved Density Fluctuation and Temporal Correlation Function in HTL Perturbation Theory

Authors: Najmul Haque, Munshi G. Mustafa, Markus H. Thoma

Abstract: Considering recently developed Hard Thermal Loop perturbation theory that takes into account the effect of the variation of the external field through the fluctuations of a conserved quantity we calculate the temporal component of the Euclidian correlation function in the vector channel. The results are found to be in good agreement with the very recent results obtained within the quenched approxi… ▽ More Considering recently developed Hard Thermal Loop perturbation theory that takes into account the effect of the variation of the external field through the fluctuations of a conserved quantity we calculate the temporal component of the Euclidian correlation function in the vector channel. The results are found to be in good agreement with the very recent results obtained within the quenched approximation of QCD and small values of the quark mass ($\sim 0.1T$) on improved lattices of size $128^3\times N_τ$ at ($N_τ=40, \ T=1.2T_C$), ($N_τ=48, \ T=1.45T_C$), and ($N_τ=16, \ T=2.98T_C$), where $N_τ$ is the temporal extent of the lattice. This suggests that the results from lattice QCD and Hard Thermal Loop perturbation theory are in close proximity for a quantity associated with the conserved density fluctuation. △ Less

Submitted 1 September, 2011; v1 submitted 17 March, 2011; originally announced March 2011.

Comments: 16 pages, 4 figures; One para added in introduction, Fig 1 modified; Accepted in Phys. Rev. D

Journal ref: Phys.Rev. D84 (2011) 054009

Low Mass Dilepton Rate from the Deconfined Phase

Authors: Carsten Greiner, Najmul Haque, Munshi G. Mustafa, Markus H. Thoma

Abstract: We discuss low mass dilepton rates ($\le 1$ GeV) from the deconfined phase of QCD using both perturbative and non-perturbative models and compare with those from lattice gauge theory and in-medium hadron gas. Our analysis suggests that the rate at very low invariant mass ($ M\le 200$ MeV) using the nonperturbative gluon condensate in a semiempirical way within the Green function dominates over the… ▽ More We discuss low mass dilepton rates ($\le 1$ GeV) from the deconfined phase of QCD using both perturbative and non-perturbative models and compare with those from lattice gauge theory and in-medium hadron gas. Our analysis suggests that the rate at very low invariant mass ($ M\le 200$ MeV) using the nonperturbative gluon condensate in a semiempirical way within the Green function dominates over the Born-rate and independent of any uncertainty associated with the choice of the strong coupling in perturbation theory. On the other hand the rate from $ρ-q$ interaction in the deconfined phase is important between 200 MeV $\le M \le 1 GeV as it is almost of same order of the Born-rate as well as in-medium hadron gas rate. Also the higher order perturbative rate, leaving aside its various uncertainties, from HTL approximation becomes reliable at $M\ge 200$ MeV and also becomes comparable with the Born-rate and the lattice-rate for $M\ge 500$ MeV, constraining on the broad resonance structures in the dilepton rate at large invariant mass. We also discuss the lattice constraints on the low mass dilepton rate. Furthermore, we discuss a more realistic way to advocate the quark-hadron duality hypothesis based on the dilepton rates from QGP and hadron gas than it is done in the literature. △ Less

Submitted 22 December, 2010; v1 submitted 11 October, 2010; originally announced October 2010.

Comments: 24 pages, 9 figures; Discussion added, Accepted in Phys. Rev. C

Journal ref: Phys.Rev.C83:014908,2011

Neutrino decay into fermionic quasiparticles in leptogenesis

Authors: Clemens P. Kiessig, Markus H. Thoma, Michael Pluemacher

Abstract: We calculate the decay rate of the lightest heavy Majorana neutrino in a thermal bath using finite temperature cutting rules and effective Green's functions according to the hard thermal loop resummation technique. Compared to the usual approach where thermal masses are inserted into the kinematics of final states, we find that deviations arise through two different leptonic dispersion relations.… ▽ More We calculate the decay rate of the lightest heavy Majorana neutrino in a thermal bath using finite temperature cutting rules and effective Green's functions according to the hard thermal loop resummation technique. Compared to the usual approach where thermal masses are inserted into the kinematics of final states, we find that deviations arise through two different leptonic dispersion relations. The decay rate differs from the usual approach by more than one order of magnitude in the temperature range which is interesting for the weak washout regime. This work summarizes the results of Ref. [1], to which we refer the interested reader. △ Less

Submitted 22 April, 2010; originally announced April 2010.

Comments: 6 pages, 3 figures, proceedings of "Beyond the standard models of particle physics, cosmology and astrophysics", Cape Town, Feb 2010

Report number: MPP-2010-50

Spontaneous disordering and symmetry breaking in complex plasmas

Authors: Sergey K. Zhdanov, Markus H. Thoma, Gregor E. Morfill

Abstract: Spontaneous symmetry breaking is an essential feature of modern science. We demonstrate that it also plays an important role in the physics of complex plasmas. Complex plasmas can serve as a powerful tool for observing and studying discrete types of symmetry and disordering at the kinetic level that numerous many-body systems exhibit. Spontaneous symmetry breaking is an essential feature of modern science. We demonstrate that it also plays an important role in the physics of complex plasmas. Complex plasmas can serve as a powerful tool for observing and studying discrete types of symmetry and disordering at the kinetic level that numerous many-body systems exhibit. △ Less

Submitted 21 April, 2010; originally announced April 2010.

Comments: 14 pages, 4 figures, submited

Decay of a Yukawa fermion at finite temperature and applications to leptogenesis

Authors: Clemens P. Kießig, Michael Plümacher, Markus H. Thoma

Abstract: We calculate the decay rate of a Yukawa fermion in a thermal bath using finite temperature cutting rules and effective Green's functions according to the hard thermal loop resummation technique. We apply this result to the decay of a heavy Majorana neutrino in leptogenesis. Compared to the usual approach where thermal masses are inserted into the kinematics of final states, we find that deviations… ▽ More We calculate the decay rate of a Yukawa fermion in a thermal bath using finite temperature cutting rules and effective Green's functions according to the hard thermal loop resummation technique. We apply this result to the decay of a heavy Majorana neutrino in leptogenesis. Compared to the usual approach where thermal masses are inserted into the kinematics of final states, we find that deviations arise through two different leptonic dispersion relations. The decay rate differs from the usual approach by more than one order of magnitude in the temperature range which is interesting for the weak washout regime. We discuss how to arrive at consistent finite temperature treatments of leptogenesis. △ Less

Submitted 30 March, 2010; v1 submitted 15 March, 2010; originally announced March 2010.

Comments: 16 pages, 5 figures

Report number: MPP 2010-31

Journal ref: Phys.Rev.D82:036007,2010

Ultrarelativistic Electron-Positron Plasma

Authors: Markus H. Thoma

Abstract: Ultrarelativistic electron-positron plasmas can be produced in high-intensity laser fields and play a role in various astrophysical situations. Their properties can be calculated using QED at finite temperature. Here we will use perturbative QED at finite temperature for calculating various important properties, such as the equation of state, dispersion relations of collective plasma modes of ph… ▽ More Ultrarelativistic electron-positron plasmas can be produced in high-intensity laser fields and play a role in various astrophysical situations. Their properties can be calculated using QED at finite temperature. Here we will use perturbative QED at finite temperature for calculating various important properties, such as the equation of state, dispersion relations of collective plasma modes of photons and electrons, Debye screening, damping rates, mean free paths, collision times, transport coefficients, and particle production rates, of ultrarelativistic electron-positron plasmas. In particular, we will focus on electron-positron plasmas produced with ultra-strong lasers. △ Less

Submitted 6 October, 2008; originally announced October 2008.

Comments: 8 pages, 8 figures, 1 table, invited talk presented at the ELI Workshop and School on Fundamental Physics with Ultra-high Fields (September 29 - October 2, 2008, Frauenwoerth, Germany)

Journal ref: Eur.Phys.J.D55:271-278,2009

What can we learn from electromagnetic plasmas about the quark-gluon plasma?

Authors: Markus H. Thoma

Abstract: Ultra-relativistic electromagnetic plasmas can be used for improving our understanding of the quark-gluon plasma. In the weakly coupled regime both plasmas can be described by transport theoretical and quantum field theoretical methods leading to similar results for the plasma properties (dielectric tensor, dispersion relations, plasma frequency, Debye screening, transport coefficients, damping… ▽ More Ultra-relativistic electromagnetic plasmas can be used for improving our understanding of the quark-gluon plasma. In the weakly coupled regime both plasmas can be described by transport theoretical and quantum field theoretical methods leading to similar results for the plasma properties (dielectric tensor, dispersion relations, plasma frequency, Debye screening, transport coefficients, damping and particle production rates). In particular, future experiments with ultra-relativistic electron-positron plasmas in ultra-strong laser fields might open the possibility to test these predictions, e.g. the existence of a new fermionic plasma wave (plasmino). In the strongly coupled regime electromagnetic plasmas such as complex plasmas can be used as models or at least analogies for the quark-gluon plasma possibly produced in relativistic heavy-ion experiments. For example, pair correlation functions can be used to investigate the equation of state and cross section enhancement for parton scattering can be explained. △ Less

Submitted 9 September, 2008; originally announced September 2008.

Comments: 8 pages, 7 figures, talk given at the SCCS 2008 International Conference, 29 July - 2 August 2008, Camerino, Italy

Convective dust clouds in a complex plasma

Authors: S. Mitic, R. Suetterlin, A. V. Ivlev, H. Hoefner, M. H. Thoma, S. Zhdanov, G. E. Morfill

Abstract: The plasma is generated in a low frequency glow discharge within an elongated glass tube oriented vertically. The dust particles added to the plasma are confined above the heater and form counter-rotating clouds close to the tube centre. The shape of the clouds and the velocity field of the conveying dust particles are determined. The forces acting on the particles are calculated. It is shown th… ▽ More The plasma is generated in a low frequency glow discharge within an elongated glass tube oriented vertically. The dust particles added to the plasma are confined above the heater and form counter-rotating clouds close to the tube centre. The shape of the clouds and the velocity field of the conveying dust particles are determined. The forces acting on the particles are calculated. It is shown that convection of the dust is affected by the convective gas motion which is triggered, in turn, by thermal creep of the gas along the inhomogeneously heated walls of the tube. △ Less

Submitted 13 August, 2008; originally announced August 2008.

Comments: 4 pages, 6 figures, submitted to Phys. Rev. Lett

Ratio of viscosity to entropy density in a strongly coupled one-component plasma

Authors: Markus H. Thoma, Gregor E. Morfill

Abstract: String theoretical arguments led to the hypothesis that the ratio of viscosity to entropy of any physical system has a lower bound. Strongly coupled systems usually have a small viscosity compared to weakly coupled plasmas in which the viscosity is proportional to the mean free path. In the case of a one-component plasma the viscosity as a function of the coupling strength shows a minimum. Here… ▽ More String theoretical arguments led to the hypothesis that the ratio of viscosity to entropy of any physical system has a lower bound. Strongly coupled systems usually have a small viscosity compared to weakly coupled plasmas in which the viscosity is proportional to the mean free path. In the case of a one-component plasma the viscosity as a function of the coupling strength shows a minimum. Here we show that the ratio of viscosity to entropy of a strongly coupled one-component plasma is always above the lower bound predicted by string theory. △ Less

Submitted 5 May, 2008; v1 submitted 31 March, 2008; originally announced March 2008.

Comments: 5 pages, revised version to be published in Europhysics Letters

Journal ref: Europhys.Lett.82:65001,2008

Field Theoretic Description of Ultrarelativistic Electron-Positron Plasmas

Authors: Markus H. Thoma

Abstract: Ultrarelativistic electron-positron plasmas can be produced in high-intensity laser fields and play a role in various astrophysical situations. Their properties can be calculated using QED at finite temperature. Here we will use perturbative QED at finite temperature for calculating various important properties, such as the equation of state, dispersion relations of collective plasma modes of ph… ▽ More Ultrarelativistic electron-positron plasmas can be produced in high-intensity laser fields and play a role in various astrophysical situations. Their properties can be calculated using QED at finite temperature. Here we will use perturbative QED at finite temperature for calculating various important properties, such as the equation of state, dispersion relations of collective plasma modes of photons and electrons, Debye screening, damping rates, mean free paths, collision times, transport coefficients, and particle production rates, of ultrarelativistic electron-positron plasmas. In particular, we will focus on electron-positron plasmas produced with ultra-strong lasers. △ Less

Submitted 6 July, 2009; v1 submitted 7 January, 2008; originally announced January 2008.

Comments: 13 pages, 7 figures, 1 table, published version

Journal ref: Rev.Mod.Phys.81:959-968,2009

Reply to Comment on the paper ``Energy Loss of Charm Quarks in the Quark-Gluon Plasma: Collisional vs Radiative'' by Mishra et al

Authors: Munshi G. Mustafa, Markus H. Thoma

Abstract: The comments raised in Ref. [1] by Mishra et al aim at two papers contained in Ref. [2]. We show that those comments on Ref. [2] pointed out by Mishra et al in Ref.[1] are not relevant and the concept used in Ref.[2] is consistent and in compliance with the classical approximation of the transport coefficients [3]. We would also like to note that most of the comments in Ref. [1] were meant for l… ▽ More The comments raised in Ref. [1] by Mishra et al aim at two papers contained in Ref. [2]. We show that those comments on Ref. [2] pointed out by Mishra et al in Ref.[1] are not relevant and the concept used in Ref.[2] is consistent and in compliance with the classical approximation of the transport coefficients [3]. We would also like to note that most of the comments in Ref. [1] were meant for light quarks, but are not even appropriate for heavy quarks. △ Less

Submitted 5 September, 2007; originally announced September 2007.

Comments: 5 pages

Wakes in a Collisional Quark-Gluon Plasma

Authors: Purnendu Chakraborty, Munshi Golam Mustafa, Rajarshi Ray, Markus H. Thoma

Abstract: Wakes created by a parton moving through a static and infinitely extended quark-gluon plasma are considered. In contrast to former investigations collisions within the quark-gluon plasma are taken into account using a transport theoretical approach (Boltzmann equation) with a Bhatnagar-Gross-Krook collision term. Within this model it is shown that the wake structure changes significantly compare… ▽ More Wakes created by a parton moving through a static and infinitely extended quark-gluon plasma are considered. In contrast to former investigations collisions within the quark-gluon plasma are taken into account using a transport theoretical approach (Boltzmann equation) with a Bhatnagar-Gross-Krook collision term. Within this model it is shown that the wake structure changes significantly compared to the collisionless case. △ Less

Submitted 27 August, 2007; v1 submitted 10 May, 2007; originally announced May 2007.

Comments: 16 pages, 4 figures, high resolution figures available from the authors, final version to be published in J. Phys. G

Journal ref: J.Phys.G34:2141-2152,2007

What Do Electromagnetic Plasmas Tell Us about Quark-Gluon Plasma?

Authors: Stanislaw Mrowczynski, Markus H. Thoma

Abstract: Since the quark-gluon plasma (QGP) reveals some obvious similarities to the well-known electromagnetic plasma (EMP), an accumulated knowledge on EMP can be used in the QGP studies. After discussing similarities and differences of the two systems, we present theoretical tools which are used to describe the plasmas. The tools include: kinetic theory, hydrodynamic approach and diagrammatic perturba… ▽ More Since the quark-gluon plasma (QGP) reveals some obvious similarities to the well-known electromagnetic plasma (EMP), an accumulated knowledge on EMP can be used in the QGP studies. After discussing similarities and differences of the two systems, we present theoretical tools which are used to describe the plasmas. The tools include: kinetic theory, hydrodynamic approach and diagrammatic perturbative methods. We consider collective phenomena in the plasma with a particular emphasis on instabilities which crucially influence temporal evolution of the system. Finally, properties of strongly coupled plasma are discussed. △ Less

Submitted 31 December, 2006; originally announced January 2007.

Comments: 34 pages, submitted to Annual Review of Nuclear and Particle Science

Journal ref: Ann.Rev.Nucl.Part.Sci.57:61-94,2007

Energy gain of heavy quarks by fluctuations in the QGP

Authors: Purnendu Chakraborty, Munshi Golam Mustafa, Markus H. Thoma

Abstract: The collisional energy gain of a heavy quark due to chromo-electromagnetic field fluctuations in a quark-gluon plasma is investigated. The field fluctuations lead to an energy gain of the quark for all temperatures and velocities. The net effect is a reduction of the collisional energy loss by 15-40% for parameters relevant at RHIC energies. The collisional energy gain of a heavy quark due to chromo-electromagnetic field fluctuations in a quark-gluon plasma is investigated. The field fluctuations lead to an energy gain of the quark for all temperatures and velocities. The net effect is a reduction of the collisional energy loss by 15-40% for parameters relevant at RHIC energies. △ Less

Submitted 11 May, 2007; v1 submitted 28 November, 2006; originally announced November 2006.

Comments: 6 pages, 4 figures, extended version, accepted for publication in Phys. Rev. C

Journal ref: Phys.Rev.C75:064908,2007

Wakes in the quark-gluon plasma

Authors: Purnendu Chakraborty, Munshi G. Mustafa, Markus H. Thoma

Abstract: Using the high temperature approximation we study, within the linear response theory, the wake in the quark-gluon plasma by a fast parton owing to dynamical screening in the space like region. When the parton moves with a speed less than the average speed of the plasmon, we find that the wake structure corresponds to a screening charge cloud traveling with the parton with one sign flip in the in… ▽ More Using the high temperature approximation we study, within the linear response theory, the wake in the quark-gluon plasma by a fast parton owing to dynamical screening in the space like region. When the parton moves with a speed less than the average speed of the plasmon, we find that the wake structure corresponds to a screening charge cloud traveling with the parton with one sign flip in the induced charge density resulting in a Lennard-Jones type potential in the outward flow with a short range repulsive and a long range attractive part. On the other hand if the parton moves with a speed higher than that of plasmon, the wake structure in the induced charge density is found to have alternate sign flips and the wake potential in the outward flow oscillates analogous to Cerenkov like wave generation with a Mach cone structure trailing the moving parton. The potential normal to the motion of the parton indicates a transverse flow in the system. We also calculate the potential due to a color dipole and discuss consequences of possible new bound states and $J/ψ$ suppression in the quark-gluon plasma. △ Less

Submitted 23 October, 2006; v1 submitted 30 June, 2006; originally announced June 2006.

Comments: 20 pages, 14 figures (high resolution figures available with authors); version accepted for publication in Phys. Rev. D

Report number: SINP/TNP/06-15

Journal ref: Phys.Rev.D74:094002,2006