-
Finite Element Analysis of the Uncertainty Contribution from Mechanical Imperfections in the LNE's Thompson-Lampard Calculable Capacitor
Authors:
Almazbek Imanaliev,
Olivier Thevenot,
Kamel Dougdag
Abstract:
Thompson-Lampard type calculable capacitors (TLCC) serve as electrical capacitance standards, enabling the realization of the farad in the International System of Units (SI) with a combined uncertainty on the order of one part in $10^8$. This paper presents an electrostatic finite element (FEM) simulation study focusing on the mechanical imperfections inherent in the developed second generation TL…
▽ More
Thompson-Lampard type calculable capacitors (TLCC) serve as electrical capacitance standards, enabling the realization of the farad in the International System of Units (SI) with a combined uncertainty on the order of one part in $10^8$. This paper presents an electrostatic finite element (FEM) simulation study focusing on the mechanical imperfections inherent in the developed second generation TLCC at LNE and their influence on the combined uncertainty of the practical realization of the farad. In particular, this study establishes the acceptable tolerances for deviations from perfect geometrical arrangements of the TLCC electrodes required to achieve the target relative uncertainty of one part in $10^8$. The simulation predictions are compared with corresponding experimental observations which were conducted with the help of the sub-micron level control of the standard's electrode geometry. In the second generation of the LNE's TLCC, the uncertainty contribution from mechanical imperfections was reduced by at least a factor of 4, as demonstrated by the present FEM analysis. Combined with other improvements, the standard's overall uncertainty meets the target level.
△ Less
Submitted 9 September, 2024;
originally announced September 2024.
-
Measuring Non-linearity in AH 2700A Capacitance Bridges with sub-ppm level uncertainty
Authors:
Almazbek Imanaliev,
Olivier Thévenot,
Kamel Dougdag,
François Piquemal
Abstract:
The stability and non-linearity of a commercial AH 2700A capacitance bridge were studied beyond its specified capabilities using the Thompson-Lampard Calculable Capacitor (TLCC) at LNE. The TLCC allows for continuous variation of measured capacitance between 0.4 pF and 1.2 pF with a resolution of 2 parts in $10^{7}$ and stability better than 1 part in $10^{9}$ over 2 days. The study aimed to deter…
▽ More
The stability and non-linearity of a commercial AH 2700A capacitance bridge were studied beyond its specified capabilities using the Thompson-Lampard Calculable Capacitor (TLCC) at LNE. The TLCC allows for continuous variation of measured capacitance between 0.4 pF and 1.2 pF with a resolution of 2 parts in $10^{7}$ and stability better than 1 part in $10^{9}$ over 2 days. The study aimed to determine root cause of the saw-tooth non-linearity pattern observed in the AH 2700A capacitance bridge. This pattern becomes apparent when the internal calibration is no longer valid, indicating deviations in the bridge circuit. Additionally, the dependence of capacitance non-linearity on various factors such as frequency and capacitance value are described. This work enables automatic calibration of the commercial bridge with an uncertainty of sub-ppm level and allows for quick evaluation of TLCC's non-linearity and monitoring of any changes over time through in-situ measurements.
△ Less
Submitted 6 September, 2024;
originally announced September 2024.
-
The ampere and the electrical units in the quantum era
Authors:
W. Poirier,
S. Djordjevic,
F. Schopfer,
O. Thévenot
Abstract:
By fixing two fundamental constants from quantum mechanics, the Planck constant $h$ and the elementary charge $e$, the revised Système International (SI) of units endorses explicitly quantum mechanics. This evolution also highlights the importance of this theory which underpins the most accurate realization of the units. From 20 May 2019, the new definitions of the kilogram and of the ampere, base…
▽ More
By fixing two fundamental constants from quantum mechanics, the Planck constant $h$ and the elementary charge $e$, the revised Système International (SI) of units endorses explicitly quantum mechanics. This evolution also highlights the importance of this theory which underpins the most accurate realization of the units. From 20 May 2019, the new definitions of the kilogram and of the ampere, based on fixed values of $h$ and $e$ respectively, will particularly impact the electrical metrology. The Josephson effect (JE) and the quantum Hall effect (QHE), used to maintain voltage and resistance standards with unprecedented reproducibility since 1990, will henceforth provide realizations of the volt and the ohm without the uncertainties inherited from the older electromechanical definitions. More broadly, the revised SI will sustain the exploitation of quantum effects to realize electrical units, to the benefit of end-users. Here, we review the state-of-the-art of these standards and discuss further applications and perspectives.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
