-
Water Induced Ferroelectric Switching: The Crucial Role of Collective Dynamics
Authors:
Muhammad Awais Aslam,
Igor Stankovic,
Gennadiy Murastov,
Amy Carl,
Zehao Song,
Kenji Watanabe,
Takashi Taniguchi,
Alois Lugstein,
Christian Teichert,
Roman Gorbachev,
Raul David Rodriguez,
Aleksandar Matkovic
Abstract:
The interaction mechanisms of water with nanoscale geometries remain poorly understood. This study focuses on behaviour of water clusters under varying external electric fields with a particular focus on molecular ferroelectric devices. We employ a two-fold approach, combining experiments with large-scale molecular dynamics simulations on graphene nanoribbon field effect transistors. We show that…
▽ More
The interaction mechanisms of water with nanoscale geometries remain poorly understood. This study focuses on behaviour of water clusters under varying external electric fields with a particular focus on molecular ferroelectric devices. We employ a two-fold approach, combining experiments with large-scale molecular dynamics simulations on graphene nanoribbon field effect transistors. We show that bilayer graphene nanoribbons provide stable anchoring of water clusters on the oxygenated edges, resulting in a ferroelectric effect. A molecular dynamics model is then used to investigate water cluster behaviour under varying external electric fields. Finally, we show that these nanoribbons exhibit significant and persistent remanent fields that can be employed in ferroelectric heterostructures and neuromorphic circuits.
△ Less
Submitted 19 April, 2023;
originally announced April 2023.
-
Probing magnetic ordering in air stable iron-rich van der Waals minerals
Authors:
Muhammad Zubair Khan,
Oleg E. Peil,
Apoorva Sharma,
Oleksandr Selyshchev,
Sergio Valencia,
Florian Kronast,
Maik Zimmermann,
Muhammad Awais Aslam,
Johann G. Raith,
Christian Teichert,
Dietrich R. T. Zahn,
Georgeta Salvan,
Aleksandar Matković,
Chair of Physics,
Department Physics,
Mechanics,
Electrical engineering,
Montanuniversität Leoben,
8700,
Leoben,
Austria.,
Materials Center Leoben Forschung GmbH,
8700,
Leoben,
Austria.
, et al. (24 additional authors not shown)
Abstract:
In the rapidly expanding field of two-dimensional materials, magnetic monolayers show great promise for the future applications in nanoelectronics, data storage, and sensing. The research in intrinsically magnetic two-dimensional materials mainly focuses on synthetic iodide and telluride based compounds, which inherently suffer from the lack of ambient stability. So far, naturally occurring layere…
▽ More
In the rapidly expanding field of two-dimensional materials, magnetic monolayers show great promise for the future applications in nanoelectronics, data storage, and sensing. The research in intrinsically magnetic two-dimensional materials mainly focuses on synthetic iodide and telluride based compounds, which inherently suffer from the lack of ambient stability. So far, naturally occurring layered magnetic materials have been vastly overlooked. These minerals offer a unique opportunity to explore air-stable complex layered systems with high concentration of local moment bearing ions. We demonstrate magnetic ordering in iron-rich two-dimensional phyllosilicates, focusing on mineral species of minnesotaite, annite, and biotite. These are naturally occurring van der Waals magnetic materials which integrate local moment baring ions of iron via magnesium/aluminium substitution in their octahedral sites. Due to self-inherent capping by silicate/aluminate tetrahedral groups, ultra-thin layers are air-stable. Chemical characterization, quantitative elemental analysis, and iron oxidation states were determined via Raman spectroscopy, wavelength disperse X-ray spectroscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy. Superconducting quantum interference device magnetometry measurements were performed to examine the magnetic ordering. These layered materials exhibit paramagnetic or superparamagnetic characteristics at room temperature. At low temperature ferrimagnetic or antiferromagnetic ordering occurs, with the critical ordering temperature of 38.7 K for minnesotaite, 36.1 K for annite, and 4.9 K for biotite. In-field magnetic force microscopy on iron bearing phyllosilicates confirmed the paramagnetic response at room temperature, present down to monolayers.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Single Crystalline 2D Material Nanoribbon Networks for Nanoelectronics
Authors:
Muhammad Awais Aslam,
Tuan Hoang Tran,
Antonio Supina,
Olivier Siri,
Vincent Meunier,
Kenji Watanabe,
Takashi Taniguchi,
Marko Kralj,
Christian Teichert,
Evgeniya Sheremet,
Raul D. Rodriguez,
Aleksandar Matković
Abstract:
The last decade has seen a flurry of studies related to graphene nanoribbons owing to their potential applications in the quantum realm. However, little experimental work has been reported towards nanoribbons of other 2D materials due to the absence of synthesis routes. Here, we propose a universal approach to synthesize high-quality networks of nanoribbons from arbitrary 2D materials while mainta…
▽ More
The last decade has seen a flurry of studies related to graphene nanoribbons owing to their potential applications in the quantum realm. However, little experimental work has been reported towards nanoribbons of other 2D materials due to the absence of synthesis routes. Here, we propose a universal approach to synthesize high-quality networks of nanoribbons from arbitrary 2D materials while maintaining high crystallinity, sufficient yield, narrow size distribution, and straight-forward device integrability. The wide applicability of this technique is demonstrated by fabricating MoS2, WS2, WSe2, and graphene nanoribbon field effect transistors that inherently do not suffer from interconnection resistances. By relying on self-assembled and self-aligned organic nanostructures as masks, we demonstrate the possibility of controlling the predominant crystallographic direction of the nanoribbon's edges. Electrical characterization shows record mobilities and very high ON currents for various TMDCs despite extreme width scaling. Lastly, we explore decoration of nanoribbon edges with plasmonic particles paving the way towards the development of nanoribbon-based plasmonic sensing and opto-electronic devices.
△ Less
Submitted 16 May, 2022;
originally announced May 2022.
-
On the magnetic nanostructure of a Co-Cu alloy processed by high-pressure torsion
Authors:
Martin Stückler,
Christian Teichert,
Aleksandar Matković,
Heinz Krenn,
Lukas Weissitsch,
Stefan Wurster,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
In this study, a preparation route of Co-Cu alloys with soft magnetic properties by high-pressure torsion deformation is introduced. Nanocrystalline, supersaturated single-phase microstructures are obtained after deformation of Co-Cu alloys, which are prepared from an initial powder mixture with Co-contents above 70 wt.%. Isochronal annealing treatments up to 400°C further reveal a remarkable micr…
▽ More
In this study, a preparation route of Co-Cu alloys with soft magnetic properties by high-pressure torsion deformation is introduced. Nanocrystalline, supersaturated single-phase microstructures are obtained after deformation of Co-Cu alloys, which are prepared from an initial powder mixture with Co-contents above 70 wt.%. Isochronal annealing treatments up to 400°C further reveal a remarkable microstructural stability. Only at 600°C, the supersaturated phase decomposes into two fcc-phases. The coercivity, measured by SQUID as a function of annealing temperature, remains significantly below the value for bulk-Co in all states investigated. In order to understand the measured magnetic properties in detail, a quantitative analysis of the magnetic microstructure is carried out by magnetic force microscopy and correlated to the observed changes in coercivity. Our results show that the rising coercivity can be explained by a magnetic hardening effect occurring in context with spinodal decomposition.
△ Less
Submitted 15 February, 2021;
originally announced February 2021.
-
Estimation of the in-situ elastic constants of wood pulp fibers in freely dried paper via AFM experiments
Authors:
Caterina Czibula,
August Brandberg,
Megan J. Cordill,
Aleksandar Matković,
Oleksandr Glushko,
Chiara Czibula,
Artem Kulachenko,
Christian Teichert,
Ulrich Hirn
Abstract:
Atomic force microscopy-based nanoindentation (AFM-NI) enables characterization of the basic mechanical properties of wood pulp fibers in conditions representative of the state inside a paper sheet. Determination of the mechanical properties under different loads is critical for the success of increasingly advanced computational models to understand, predict and improve the behavior of paper and p…
▽ More
Atomic force microscopy-based nanoindentation (AFM-NI) enables characterization of the basic mechanical properties of wood pulp fibers in conditions representative of the state inside a paper sheet. Determination of the mechanical properties under different loads is critical for the success of increasingly advanced computational models to understand, predict and improve the behavior of paper and paperboard. Here, AFM-NI was used to indent fibers transverse to and along the longitudinal axis of the fiber. Indentation moduli and hardness were obtained for relative humidity from 25 % to 75 %. The hardness and the indentation modulus exhibit moisture dependency, decreasing by 75 % and 50 %, respectively, over the range tested. The determined indentation moduli were combined with previous work to estimate the longitudinal and transverse elastic modulus of the fiber wall. Due to the relatively low indentation moduli, the elastic constants are also low compared to values obtained via single fiber testing.
△ Less
Submitted 5 December, 2020;
originally announced December 2020.
-
AFM-based low frequency viscoelastic characterization of wood pulp fibers at different relative humidity
Authors:
Caterina Czibula,
Tristan Seidlhofer,
Christian Ganser,
Ulrich Hirn,
Christian Teichert
Abstract:
The viscoelastic behavior of wood pulp fibers plays a fundamental role in the performance of paper and paper products. Wood pulp fibers are hierarchical composites consisting of different cell wall layers and have anisotropic properties. Since accessing the individual fibers is challenging, no measurement technique has been able to characterize the viscoelastic properties in the longitudinal and t…
▽ More
The viscoelastic behavior of wood pulp fibers plays a fundamental role in the performance of paper and paper products. Wood pulp fibers are hierarchical composites consisting of different cell wall layers and have anisotropic properties. Since accessing the individual fibers is challenging, no measurement technique has been able to characterize the viscoelastic properties in the longitudinal and transverse fiber direction yet. Here, an atomic force microscopy-based method is applied to investigate the viscoelastic properties of wood pulp fibers at varying relative humidity in both fiber direction. Experimental creep tests have been performed to investigate the material's low frequency regime response. A spring-dashpot model has been applied to characterize the viscoelastic behavior. The results indicate surprisingly small differences of the properties between both fiber directions. Transferring the results into a spectral representation explains an opposing trend of the viscosity that is connected to the long-term behavior.
△ Less
Submitted 5 December, 2020;
originally announced December 2020.
-
Effects of Hole-Transport Layer Homogeneity in Organic Solar Cells, A Multi-Length Scale Study
Authors:
Huei-Ting Chien,
Markus Poelzl,
Georg Koller,
Susanna Challinger,
Callum Fairbairn,
Iain Baikie,
Markus Kratzer,
Christian Teichert,
Bettina Friedel
Abstract:
Irreproducibility is a serious issue in thin film organic photovoltaic (OPV) devices, as smallest local inhomogeneities can change the entire behaviour of identically built devices without showing obvious failure. Inhomogeneities can occur at various steps of device preparation and appear in all layers with different length scales and impact. The hole-transport interlayer (HTL) in OPV devices bloc…
▽ More
Irreproducibility is a serious issue in thin film organic photovoltaic (OPV) devices, as smallest local inhomogeneities can change the entire behaviour of identically built devices without showing obvious failure. Inhomogeneities can occur at various steps of device preparation and appear in all layers with different length scales and impact. The hole-transport interlayer (HTL) in OPV devices blocks unwanted electron diffusion to the anode and corrects energetic mismatch between oxide electrode and organic semiconductor. Most commonly used is commercial ink based on poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT PSS) colloidal particles. However, exactly these are suspected to cause microscopic inhomogeneities, causing known irreproducibility of device characteristics. Considering PEDOT:PSS acidity-caused electrode corrosion, it is questionable how much impact colloids have on device homogeneity. In this report, we give proof that a colloidal HTL does not necessarily cause device inhomogeneity and decreased efficiency, by comparing OPV devices with different HTLs, namely from commercial PEDOT:PSS ink and from MoO3, obtained from two liquid precursors, leading to quasi-continuous or colloidal layers. With a combination of X-ray diffraction, atomic force and Kelvin probe microscopy, photoelectron and ambient air photoemission spectroscopy, we discuss the layers properties from nano- to macroscale and demonstrate their impact upon implementation into OPV devices, via spatially-resolved characterization.
△ Less
Submitted 24 June, 2019;
originally announced August 2019.
-
Molecules on rails: friction anisotropy and preferential sliding directions of organic nanocrystallites on two-dimensional materials
Authors:
Borislav Vasić,
Igor Stanković,
Aleksandar Matković,
Markus Kratzer,
Christian Ganser,
Radoš Gajić,
Christian Teichert
Abstract:
Two-dimensional (2D) materials are envisaged as ultra-thin solid lubricants for nano-mechanical systems. So far, their frictional properties at the nanoscale have been studied by standard friction force microscopy. However, lateral manipulation of nanoparticles is a more suitable method to study the dependence of friction on the crystallography of two contacting surfaces. Still, such experiments a…
▽ More
Two-dimensional (2D) materials are envisaged as ultra-thin solid lubricants for nano-mechanical systems. So far, their frictional properties at the nanoscale have been studied by standard friction force microscopy. However, lateral manipulation of nanoparticles is a more suitable method to study the dependence of friction on the crystallography of two contacting surfaces. Still, such experiments are lacking. In this study, we combine atomic force microscopy (AFM) based lateral manipulation and molecular dynamics simulations in order to investigate the movements of organic needle-like nanocrystallites grown by van der Waals epitaxy on graphene and hexagonal boron nitride. We observe that nanoneedle fragments -- when pushed by an AFM tip -- do not move along the original pushing directions. Instead, they slide on the 2D materials preferentially along the needles' growth directions, which act as invisible rails along commensurate directions. Further, when the nanocrystallites were rotated by applying a torque with the AFM tip across the preferential sliding directions, we find an increase of the torsional signal of the AFM cantilever. We demonstrate in conjunction with simulations that both, the significant friction anisotropy and preferential sliding directions are determined by the complex epitaxial relation and arise from the commensurate and incommensurate states between the organic nanocrystallites and the 2D materials.
△ Less
Submitted 1 October, 2018;
originally announced October 2018.
-
Nucleation and growth of thin films of rod--like conjugated molecules
Authors:
Gregor Hlawacek,
Christian Teichert
Abstract:
Thin films formed from small molecules rapidly gain importance in different technological fields. To explain their growth, methods developed for zero--dimensional atoms as the film forming particles are applied. However, in organic thin film growth the dimensionality of the building blocks comes into play. Using the special case of the model molecule para--Sexiphenyl, we will emphasize the challen…
▽ More
Thin films formed from small molecules rapidly gain importance in different technological fields. To explain their growth, methods developed for zero--dimensional atoms as the film forming particles are applied. However, in organic thin film growth the dimensionality of the building blocks comes into play. Using the special case of the model molecule para--Sexiphenyl, we will emphasize the challenges that arise from the anisotropic and one--dimensional nature of building blocks. Differences or common features with other rodlike molecules will be discussed. The typical morphologies encountered for this group of molecules and the relevant growth modes will be investigated. Special attention is given to the transition between flat lying and upright orientation of the building blocks during nucleation. We will further discuss methods to control the molecular orientation and describe the involved diffusion processes qualitatively and quantitatively.
△ Less
Submitted 15 February, 2013; v1 submitted 18 January, 2013;
originally announced January 2013.
-
The influence of substrate temperature on growth of para-sexiphenyl thin films on Ir{111} supported graphene studied by LEEM
Authors:
Fawad S. Khokhar,
Gregor Hlawacek,
Raoul van Gastel,
Harold J. W. Zandvliet,
Christian Teichert,
Bene Poelsema
Abstract:
The growth of para-sexiphenyl (6P) thin films as a function of substrate temperature on Ir{111} supported graphene flakes has been studied in real-time with Low Energy Electron Microscopy (LEEM). Micro Low Energy Electron Diffraction (μLEED) has been used to determine the structure of the different 6P features formed on the surface. We observe the nucleation and growth of a wetting layer consistin…
▽ More
The growth of para-sexiphenyl (6P) thin films as a function of substrate temperature on Ir{111} supported graphene flakes has been studied in real-time with Low Energy Electron Microscopy (LEEM). Micro Low Energy Electron Diffraction (μLEED) has been used to determine the structure of the different 6P features formed on the surface. We observe the nucleation and growth of a wetting layer consisting of lying molecules in the initial stages of growth. Graphene defects -- wrinkles -- are found to be preferential sites for the nucleation of the wetting layer and of the 6P needles that grow on top of the wetting layer in the later stages of deposition. The molecular structure of the wetting layer and needles is found to be similar. As a result, only a limited number of growth directions are observed for the needles. In contrast, on the bare Ir{111} surface 6P molecules assume an upright orientation. The formation of ramified islands is observed on the bare Ir{111} surface at 320 K and 352 K, whereas at 405 K the formation of a continuous layer of upright standing molecules growing in a step flow like manner is observed.
△ Less
Submitted 11 November, 2011; v1 submitted 2 July, 2011;
originally announced July 2011.
-
Hierarchy of adhesion forces in patterns of photoreactive surface layers
Authors:
G. Hlawacek,
Q. Shen,
C. Teichert,
A. Lex,
G. Trimmel,
W. Kern
Abstract:
Precise control of surface properties including electrical characteristics, wettability, and friction is a prerequisite for manufacturing modern organic electronic devices. The successful combination of bottom up approaches for aligning and orienting the molecules and top down techniques to structure the substrate on the nano and micrometer scale allows the cost efficient fabrication and integra…
▽ More
Precise control of surface properties including electrical characteristics, wettability, and friction is a prerequisite for manufacturing modern organic electronic devices. The successful combination of bottom up approaches for aligning and orienting the molecules and top down techniques to structure the substrate on the nano and micrometer scale allows the cost efficient fabrication and integration of future organic light emitting diodes and organic thin film transistors. One possibility for the top down patterning of a surface is to utilize different surface free energies or wetting properties of a functional group. Here, we used friction force microscopy (FFM) to reveal chemical patterns inscribed by a photolithographic process into a photosensitive surface layer. FFM allowed the simultaneous visualization of at least three different chemical surface terminations. The underlying mechanism is related to changes in the chemical interaction between probe and film surface.
△ Less
Submitted 15 October, 2008;
originally announced October 2008.
