Showing 1–50 of 179 results for author: Suresh, K

CS-Sum: A Benchmark for Code-Switching Dialogue Summarization and the Limits of Large Language Models

Authors: Sathya Krishnan Suresh, Tanmay Surana, Lim Zhi Hao, Eng Siong Chng

Abstract: Code-switching (CS) poses a significant challenge for Large Language Models (LLMs), yet its comprehensibility remains underexplored in LLMs. We introduce CS-Sum, to evaluate the comprehensibility of CS by the LLMs through CS dialogue to English summarization. CS-Sum is the first benchmark for CS dialogue summarization across Mandarin-English (EN-ZH), Tamil-English (EN-TA), and Malay-English (EN-MS… ▽ More Code-switching (CS) poses a significant challenge for Large Language Models (LLMs), yet its comprehensibility remains underexplored in LLMs. We introduce CS-Sum, to evaluate the comprehensibility of CS by the LLMs through CS dialogue to English summarization. CS-Sum is the first benchmark for CS dialogue summarization across Mandarin-English (EN-ZH), Tamil-English (EN-TA), and Malay-English (EN-MS), with 900-1300 human-annotated dialogues per language pair. Evaluating ten LLMs, including open and closed-source models, we analyze performance across few-shot, translate-summarize, and fine-tuning (LoRA, QLoRA on synthetic data) approaches. Our findings show that though the scores on automated metrics are high, LLMs make subtle mistakes that alter the complete meaning of the dialogue. To this end, we introduce 3 most common type of errors that LLMs make when handling CS input. Error rates vary across CS pairs and LLMs, with some LLMs showing more frequent errors on certain language pairs, underscoring the need for specialized training on code-switched data. △ Less

Submitted 19 May, 2025; originally announced May 2025.

Comments: 17 pages, 5 figures and 11 tables

First Measurement of the Total Compton Scattering Cross Section between 6 and 11 GeV

Authors: GlueX Collaboration, F. Afzal, C. S. Akondi, M. Albrecht, M. Amaryan, S. Arrigo, V. Arroyave, A. Asaturyan, A. Austregesilo, Z. Baldwin, F. Barbosa, J. Barlow, E. Barriga, R. Barsotti, D. Barton, V. Baturin, V. V. Berdnikov, T. Black, W. Boeglin, M. Boer, W. J. Briscoe, T. Britton, R. Brunner, S. Cao, E. Chudakov , et al. (126 additional authors not shown)

Abstract: The total cross section for Compton scattering off atomic electrons, $γ+e\rightarrowγ'+e'$, was measured using photons with energies between 6.5 and 11.1~GeV incident on a $^9$Be target as part of the PrimEx-eta experiment in Hall D at Jefferson Lab. This is the first measurement of this fundamental QED process within this energy range. The total uncertainties of the cross section averaged to 3.4%… ▽ More The total cross section for Compton scattering off atomic electrons, $γ+e\rightarrowγ'+e'$, was measured using photons with energies between 6.5 and 11.1~GeV incident on a $^9$Be target as part of the PrimEx-eta experiment in Hall D at Jefferson Lab. This is the first measurement of this fundamental QED process within this energy range. The total uncertainties of the cross section averaged to 3.4% across all energy bins. This not only demonstrates the capability of this experimental setup to perform precision cross-section measurements at forward angles but also allows us to compare with state-of-the-art QED calculations. △ Less

Submitted 12 May, 2025; originally announced May 2025.

Comments: 7 pages, 4 figures, submitted to Physics Letters B

AlignVLM: Bridging Vision and Language Latent Spaces for Multimodal Understanding

Authors: Ahmed Masry, Juan A. Rodriguez, Tianyu Zhang, Suyuchen Wang, Chao Wang, Aarash Feizi, Akshay Kalkunte Suresh, Abhay Puri, Xiangru Jian, Pierre-André Noël, Sathwik Tejaswi Madhusudhan, Marco Pedersoli, Bang Liu, Nicolas Chapados, Yoshua Bengio, Enamul Hoque, Christopher Pal, Issam H. Laradji, David Vazquez, Perouz Taslakian, Spandana Gella, Sai Rajeswar

Abstract: Aligning visual features with language embeddings is a key challenge in vision-language models (VLMs). The performance of such models hinges on having a good connector that maps visual features generated by a vision encoder to a shared embedding space with the LLM while preserving semantic similarity. Existing connectors, such as multilayer perceptrons (MLPs), often produce out-of-distribution or… ▽ More Aligning visual features with language embeddings is a key challenge in vision-language models (VLMs). The performance of such models hinges on having a good connector that maps visual features generated by a vision encoder to a shared embedding space with the LLM while preserving semantic similarity. Existing connectors, such as multilayer perceptrons (MLPs), often produce out-of-distribution or noisy inputs, leading to misalignment between the modalities. In this work, we propose a novel vision-text alignment method, AlignVLM, that maps visual features to a weighted average of LLM text embeddings. Our approach leverages the linguistic priors encoded by the LLM to ensure that visual features are mapped to regions of the space that the LLM can effectively interpret. AlignVLM is particularly effective for document understanding tasks, where scanned document images must be accurately mapped to their textual content. Our extensive experiments show that AlignVLM achieves state-of-the-art performance compared to prior alignment methods. We provide further analysis demonstrating improved vision-text feature alignment and robustness to noise. △ Less

Submitted 3 February, 2025; originally announced February 2025.

First Measurement of $a^0_2(1320)$ Polarized Photoproduction Cross Section

Authors: GlueX Collaboration, F. Afzal, C. S. Akondi, M. Albrecht, M. Amaryan, S. Arrigo, V. Arroyave, A. Asaturyan, A. Austregesilo, Z. Baldwin, F. Barbosa, J. Barlow, E. Barriga, R. Barsotti, D. Barton, V. Baturin, V. V. Berdnikov, T. Black, W. Boeglin, M. Boer, W. J. Briscoe, T. Britton, S. Cao, E. Chudakov, G. Chung , et al. (127 additional authors not shown)

Abstract: We measure for the first time the differential photoproduction cross section $dσ/dt$ of the $a_2(1320)$ meson at an average photon beam energy of 8.5~GeV, using data with an integrated luminosity of 104~pb$^{-1}$ collected by the GlueX experiment. We fully reconstruct the $γp \to ηπ^0 p$ reaction and perform a partial-wave analysis in the $a_2(1320)$ mass region with amplitudes that incorporate th… ▽ More We measure for the first time the differential photoproduction cross section $dσ/dt$ of the $a_2(1320)$ meson at an average photon beam energy of 8.5~GeV, using data with an integrated luminosity of 104~pb$^{-1}$ collected by the GlueX experiment. We fully reconstruct the $γp \to ηπ^0 p$ reaction and perform a partial-wave analysis in the $a_2(1320)$ mass region with amplitudes that incorporate the linear polarization of the beam. This allows us to separate for the first time the contributions of natural- and unnatural-parity exchanges. These measurements provide novel information about the photoproduction mechanism, which is critical for the search for spin-exotic states. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Comments: 8 pages, 4 figures plus supplemental material

DiaSynth: Synthetic Dialogue Generation Framework for Low Resource Dialogue Applications

Authors: Sathya Krishnan Suresh, Wu Mengjun, Tushar Pranav, Eng Siong Chng

Abstract: The scarcity of domain-specific dialogue datasets limits the development of dialogue systems across applications. Existing research is constrained by general or niche datasets that lack sufficient scale for training dialogue systems. To address this gap, we introduce DiaSynth - a synthetic dialogue generation framework capable of generating high-quality, contextually rich dialogues across a wide r… ▽ More The scarcity of domain-specific dialogue datasets limits the development of dialogue systems across applications. Existing research is constrained by general or niche datasets that lack sufficient scale for training dialogue systems. To address this gap, we introduce DiaSynth - a synthetic dialogue generation framework capable of generating high-quality, contextually rich dialogues across a wide range of domains. Unlike existing frameworks, DiaSynth uses Large Language Models (LLMs) and Chain of Thought (CoT) reasoning to generate dynamic, domain-specific dialogues with simulated personas and diverse conversational features. We perform our experiments by generating synthetic data using different LLMs and few-shot examples from DialogSum and SAMSum. The pretrained language models fine-tuned on the synthetic data outperform the base models by 16.47% on dialogue summarization, while the comparison between models fine-tuned on in-domain data and synthetic data shows that the synthetic data is able to capture 90.48% of the performance distribution of the in-domain data on dialogue summarization. The quality of the data generated also increases as we increase the size of LLM from 3B to 8B. These results validate DiaSynth's potential as a robust alternative to traditional data collection methods. We open source the code and data generated for future research. △ Less

Submitted 10 February, 2025; v1 submitted 25 September, 2024; originally announced September 2024.

Comments: 13 pages, 1 figure

Journal ref: NAACL 2025

First Measurement of Near- and Sub-Threshold $J/ψ$ Photoproduction off Nuclei

Authors: J. R. Pybus, L. Ehinger, T. Kolar, B. Devkota, P. Sharp, B. Yu, M. M. Dalton, D. Dutta, H. Gao, O. Hen, E. Piasetzky, S. N. Santiesteban, A. Schmidt, A. Somov, H. Szumila-Vance, S. Adhikari, A. Asaturyan, A. Austregesilo, C. Ayerbe Gayoso, J. Barlow, V. V. Berdnikov, H. D. Bhatt, Deepak Bhetuwal, T. Black, W. J. Briscoe , et al. (43 additional authors not shown)

Abstract: We report on the first measurement of $J/ψ$ photoproduction from nuclei in the photon energy range of $7$ to $10.8$ GeV, extending above and below the photoproduction threshold in the free proton of $\sim8.2$ GeV. The experiment used a tagged photon beam incident on deuterium, helium, and carbon, and the GlueX detector at Jefferson Lab to measure the semi-inclusive $A(γ,e^+e^-p)$ reaction with a d… ▽ More We report on the first measurement of $J/ψ$ photoproduction from nuclei in the photon energy range of $7$ to $10.8$ GeV, extending above and below the photoproduction threshold in the free proton of $\sim8.2$ GeV. The experiment used a tagged photon beam incident on deuterium, helium, and carbon, and the GlueX detector at Jefferson Lab to measure the semi-inclusive $A(γ,e^+e^-p)$ reaction with a dilepton invariant mass $M(e^+e^-)\sim m_{J/ψ}=3.1$ GeV. The incoherent $J/ψ$ photoproduction cross sections in the measured nuclei are extracted as a function of the incident photon energy, momentum transfer, and proton reconstructed missing light-cone momentum fraction. Comparisons with theoretical predictions assuming a dipole form factor allow extracting a gluonic radius for bound protons of $\sqrt{\langle r^2\rangle}=0.85\pm0.14$ fm. The data also suggest an excess of the measured cross section for sub-threshold production and for interactions with high missing light-cone momentum fraction protons. The measured enhancement can be explained by modified gluon structure for high-virtuality bound-protons. △ Less

Submitted 23 October, 2024; v1 submitted 27 September, 2024; originally announced September 2024.

Deep Learning based Optical Image Super-Resolution via Generative Diffusion Models for Layerwise in-situ LPBF Monitoring

Authors: Francis Ogoke, Sumesh Kalambettu Suresh, Jesse Adamczyk, Dan Bolintineanu, Anthony Garland, Michael Heiden, Amir Barati Farimani

Abstract: The stochastic formation of defects during Laser Powder Bed Fusion (L-PBF) negatively impacts its adoption for high-precision use cases. Optical monitoring techniques can be used to identify defects based on layer-wise imaging, but these methods are difficult to scale to high resolutions due to cost and memory constraints. Therefore, we implement generative deep learning models to link low-cost, l… ▽ More The stochastic formation of defects during Laser Powder Bed Fusion (L-PBF) negatively impacts its adoption for high-precision use cases. Optical monitoring techniques can be used to identify defects based on layer-wise imaging, but these methods are difficult to scale to high resolutions due to cost and memory constraints. Therefore, we implement generative deep learning models to link low-cost, low-resolution images of the build plate to detailed high-resolution optical images of the build plate, enabling cost-efficient process monitoring. To do so, a conditional latent probabilistic diffusion model is trained to produce realistic high-resolution images of the build plate from low-resolution webcam images, recovering the distribution of small-scale features and surface roughness. We first evaluate the performance of the model by analyzing the reconstruction quality of the generated images using peak-signal-to-noise-ratio (PSNR), structural similarity index measure (SSIM) and wavelet covariance metrics that describe the preservation of high-frequency information. Additionally, we design a framework based upon the Segment Anything foundation model to recreate the 3D morphology of the printed part and analyze the surface roughness of the reconstructed samples. Finally, we explore the zero-shot generalization capabilities of the implemented framework to other part geometries by creating synthetic low-resolution data. △ Less

Submitted 19 September, 2024; originally announced September 2024.

TreeTOp: Topology Optimization using Constructive Solid Geometry Trees

Authors: Rahul Kumar Padhy, Pramod Thombre, Krishnan Suresh, Aaditya Chandrasekhar

Abstract: Feature-mapping methods for topology optimization (FMTO) facilitate direct geometry extraction by leveraging high-level geometric descriptions of the designs. However, FMTO often relies solely on Boolean unions, which can restrict the design space. This work proposes an FMTO framework leveraging an expanded set of Boolean operations, namely, union, intersection, and subtraction. The optimization p… ▽ More Feature-mapping methods for topology optimization (FMTO) facilitate direct geometry extraction by leveraging high-level geometric descriptions of the designs. However, FMTO often relies solely on Boolean unions, which can restrict the design space. This work proposes an FMTO framework leveraging an expanded set of Boolean operations, namely, union, intersection, and subtraction. The optimization process entails determining the primitives and the optimal Boolean operation tree. In particular, the framework leverages a recently proposed unified Boolean operation approach. This approach presents a continuous and differentiable function that interpolates the Boolean operations, enabling gradient-based optimization. The proposed methodology is agnostic to the specific primitive parametrization and is showcased through various numerical examples. △ Less

Submitted 3 September, 2024; originally announced September 2024.

Comments: Submitted to Structural and Multidisciplinary Optimization

Role of NH3 Binding Energy in the Early Evolution of Protostellar Cores

Authors: S. Kakkenpara Suresh, O. Sipila, P. Caselli, F. Dulieu

Abstract: NH$_{3}$(ammonia) plays a critical role in the chemistry of star and planet formation, yet uncertainties in its binding energy (BE) values complicate accurate estimates of its abundances. Recent research suggests a multi-binding energy approach, challenging the previous single-value notion. In this work, we use different values of NH$_{3}$ binding energy to examine its effects on the NH$_{3}$ abun… ▽ More NH$_{3}$(ammonia) plays a critical role in the chemistry of star and planet formation, yet uncertainties in its binding energy (BE) values complicate accurate estimates of its abundances. Recent research suggests a multi-binding energy approach, challenging the previous single-value notion. In this work, we use different values of NH$_{3}$ binding energy to examine its effects on the NH$_{3}$ abundances and, consequently, in the early evolution of protostellar cores. Using a gas-grain chemical network, we systematically vary the values of NH$_{3}$ binding energies in a model Class 0 protostellar core and study the effects of these binding energies on the NH$_{3}$ abundances. Our simulations indicate that abundance profiles of NH$_{3}$ are highly sensitive to the binding energy used, particularly in the warmer inner regions of the core. Higher binding energies lead to lower gas-phase NH$_{3}$ abundances, while lower values of binding energy have the opposite effect. Furthermore, this BE-dependent abundance variation of NH$_{3}$ significantly affects the formation pathways and abundances of key species such as HNC, HCN, and CN. Our tests also reveal that the size variation of the emitting region due to binding energy becomes discernible only with beam sizes of 10 arcsec or less. These findings underscore the importance of considering a range of binding energies in astrochemical models and highlight the need for higher resolution observations to better understand the subtleties of molecular cloud chemistry and star formation processes. △ Less

Submitted 25 July, 2024; originally announced July 2024.

Journal ref: A&A 696, A71 (2025)

Upper Limit on the Photoproduction Cross Section of the Spin-Exotic $π_1(1600)$

Authors: GlueX Collaboration, F. Afzal, C. S. Akondi, M. Albrecht, M. Amaryan, S. Arrigo, V. Arroyave, A. Asaturyan, A. Austregesilo, Z. Baldwin, F. Barbosa, J. Barlow, E. Barriga, R. Barsotti, D. Barton, V. Baturin, V. V. Berdnikov, T. Black, W. Boeglin, M. Boer, W. J. Briscoe, T. Britton, S. Cao, E. Chudakov, G. Chung , et al. (125 additional authors not shown)

Abstract: The spin-exotic hybrid meson $π_{1}(1600)$ is predicted to have a large decay rate to the $ωππ$ final state. Using 76.6~pb$^{-1}$ of data collected with the GlueX detector, we measure the cross sections for the reactions $γp \to ωπ^+ π^- p$, $γp \to ωπ^0 π^0 p$, and $γp\toωπ^-π^0Δ^{++}$ in the range $E_γ=$ 8-10 GeV. Using isospin conservation, we set the first upper limits on the photoproduction c… ▽ More The spin-exotic hybrid meson $π_{1}(1600)$ is predicted to have a large decay rate to the $ωππ$ final state. Using 76.6~pb$^{-1}$ of data collected with the GlueX detector, we measure the cross sections for the reactions $γp \to ωπ^+ π^- p$, $γp \to ωπ^0 π^0 p$, and $γp\toωπ^-π^0Δ^{++}$ in the range $E_γ=$ 8-10 GeV. Using isospin conservation, we set the first upper limits on the photoproduction cross sections of the $π^{0}_{1}(1600)$ and $π^{-}_{1}(1600)$. We combine these limits with lattice calculations of decay widths and find that photoproduction of $η'π$ is the most sensitive two-body system to search for the $π_1(1600)$. △ Less

Submitted 9 January, 2025; v1 submitted 3 July, 2024; originally announced July 2024.

Comments: 7 pages, 3 figures plus supplemental materials

Journal ref: Phys.Rev.Lett. 133 (2024) 26, 261903

Measurement of Spin-Density Matrix Elements in $Δ^{++}(1232)$ photoproduction

Authors: F. Afzal, C. S. Akondi, M. Albrecht, M. Amaryan, S. Arrigo, V. Arroyave, A. Asaturyan, A. Austregesilo, Z. Baldwin, F. Barbosa, J. Barlow, E. Barriga, R. Barsotti, D. Barton, V. Baturin, V. V. Berdnikov, T. Black, W. Boeglin, M. Boer, W. J. Briscoe, T. Britton, S. Cao, E. Chudakov, G. Chung, P. L. Cole , et al. (124 additional authors not shown)

Abstract: We measure the spin-density matrix elements (SDMEs) of the $Δ^{++}(1232)$ in the photoproduction reaction $γp \to π^-Δ^{++}(1232)$ with the GlueX experiment in Hall D at Jefferson Lab. The measurement uses a linearly--polarized photon beam with energies from $8.2$ to $8.8$~GeV and the statistical precision of the SDMEs exceeds the previous measurement by three orders of magnitude for the momentum… ▽ More We measure the spin-density matrix elements (SDMEs) of the $Δ^{++}(1232)$ in the photoproduction reaction $γp \to π^-Δ^{++}(1232)$ with the GlueX experiment in Hall D at Jefferson Lab. The measurement uses a linearly--polarized photon beam with energies from $8.2$ to $8.8$~GeV and the statistical precision of the SDMEs exceeds the previous measurement by three orders of magnitude for the momentum transfer squared region below $1.4$ GeV$^2$. The data are sensitive to the previously undetermined relative sign between couplings in existing Regge-exchange models. Linear combinations of the extracted SDMEs allow for a decomposition into natural and unnatural--exchange amplitudes. We find that the unnatural exchange plays an important role in the low momentum transfer region. △ Less

Submitted 26 July, 2024; v1 submitted 18 June, 2024; originally announced June 2024.

AI-Assisted Detector Design for the EIC (AID(2)E)

Authors: M. Diefenthaler, C. Fanelli, L. O. Gerlach, W. Guan, T. Horn, A. Jentsch, M. Lin, K. Nagai, H. Nayak, C. Pecar, K. Suresh, A. Vossen, T. Wang, T. Wenaus

Abstract: Artificial Intelligence is poised to transform the design of complex, large-scale detectors like the ePIC at the future Electron Ion Collider. Featuring a central detector with additional detecting systems in the far forward and far backward regions, the ePIC experiment incorporates numerous design parameters and objectives, including performance, physics reach, and cost, constrained by mechanical… ▽ More Artificial Intelligence is poised to transform the design of complex, large-scale detectors like the ePIC at the future Electron Ion Collider. Featuring a central detector with additional detecting systems in the far forward and far backward regions, the ePIC experiment incorporates numerous design parameters and objectives, including performance, physics reach, and cost, constrained by mechanical and geometric limits. This project aims to develop a scalable, distributed AI-assisted detector design for the EIC (AID(2)E), employing state-of-the-art multiobjective optimization to tackle complex designs. Supported by the ePIC software stack and using Geant4 simulations, our approach benefits from transparent parameterization and advanced AI features. The workflow leverages the PanDA and iDDS systems, used in major experiments such as ATLAS at CERN LHC, the Rubin Observatory, and sPHENIX at RHIC, to manage the compute intensive demands of ePIC detector simulations. Tailored enhancements to the PanDA system focus on usability, scalability, automation, and monitoring. Ultimately, this project aims to establish a robust design capability, apply a distributed AI-assisted workflow to the ePIC detector, and extend its applications to the design of the second detector (Detector-2) in the EIC, as well as to calibration and alignment tasks. Additionally, we are developing advanced data science tools to efficiently navigate the complex, multidimensional trade-offs identified through this optimization process. △ Less

Submitted 28 May, 2024; v1 submitted 25 May, 2024; originally announced May 2024.

Comments: 11 pages, 4 figures, AI4EIC 2023 proceeding

Feasibility of one loop inflation in the light of CMB

Authors: Anupama B, P K Suresh

Abstract: The one loop inflation stemming from the superstring theory and associated Yukawa coupling arising from supersymmetric interactions is examined with CMB. The Yukawa coupling can exist beyond standard model particle physics sector. The tensor to scalar ratio of the loop inflation is found consistent with the recent CMB results for the Yukawa coupling from cosmology. The newly derived constraint on… ▽ More The one loop inflation stemming from the superstring theory and associated Yukawa coupling arising from supersymmetric interactions is examined with CMB. The Yukawa coupling can exist beyond standard model particle physics sector. The tensor to scalar ratio of the loop inflation is found consistent with the recent CMB results for the Yukawa coupling from cosmology. The newly derived constraint on the Yukawa coupling constant may play a crucial role in validating inflationary model originating from supersymmetry and may shed some light on the formation of dark matter or dark energy. The outcomes of the study may be helpful in the phenomenological realisation of string theory. △ Less

Submitted 19 August, 2024; v1 submitted 5 May, 2024; originally announced May 2024.

Comments: Title, abstract and introduction modified. 13 pages, 2 tables and 2 figures

Optimal Box Contraction for Solving Linear Systems via Simulated and Quantum Annealing

Authors: Sanjay Suresh, Krishnan Suresh

Abstract: Solving linear systems of equations is an important problem in science and engineering. Many quantum algorithms, such as the Harrow-Hassidim-Lloyd (HHL) algorithm (for quantum-gate computers) and the box algorithm (for quantum-annealing machines), have been proposed for solving such systems. The focus of this paper is on improving the efficiency of the box algorithm. The basic principle behind t… ▽ More Solving linear systems of equations is an important problem in science and engineering. Many quantum algorithms, such as the Harrow-Hassidim-Lloyd (HHL) algorithm (for quantum-gate computers) and the box algorithm (for quantum-annealing machines), have been proposed for solving such systems. The focus of this paper is on improving the efficiency of the box algorithm. The basic principle behind this algorithm is to transform the linear system into a series of quadratic unconstrained binary optimization (QUBO) problems, which are then solved on annealing machines. The computational efficiency of the box algorithm is entirely determined by the number of iterations, which, in turn, depends on the box contraction ratio, typically set to 0.5. Here, we show through theory that a contraction ratio of 0.5 is sub-optimal and that we can achieve a speed-up with a contraction ratio of 0.2. This is confirmed through numerical experiments where a speed-up between $20 \%$ to $60 \%$ is observed when the optimal contraction ratio is used. △ Less

Submitted 5 May, 2024; originally announced May 2024.

VoroTO: Multiscale Topology Optimization of Voronoi Structures using Surrogate Neural Networks

Authors: Rahul Kumar Padhy, Krishnan Suresh, Aaditya Chandrasekhar

Abstract: Cellular structures found in nature exhibit remarkable properties such as high strength, high energy absorption, excellent thermal/acoustic insulation, and fluid transfusion. Many of these structures are Voronoi-like; therefore researchers have proposed Voronoi multi-scale designs for a wide variety of engineering applications. However, designing such structures can be computationally prohibitive… ▽ More Cellular structures found in nature exhibit remarkable properties such as high strength, high energy absorption, excellent thermal/acoustic insulation, and fluid transfusion. Many of these structures are Voronoi-like; therefore researchers have proposed Voronoi multi-scale designs for a wide variety of engineering applications. However, designing such structures can be computationally prohibitive due to the multi-scale nature of the underlying analysis and optimization. In this work, we propose the use of a neural network (NN) to carry out efficient topology optimization (TO) of multi-scale Voronoi structures. The NN is first trained using Voronoi parameters (cell site locations, thickness, orientation, and anisotropy) to predict the homogenized constitutive properties. This network is then integrated into a conventional TO framework to minimize structural compliance subject to a volume constraint. Special considerations are given for ensuring positive definiteness of the constitutive matrix and promoting macroscale connectivity. Several numerical examples are provided to showcase the proposed method. △ Less

Submitted 28 April, 2024; originally announced April 2024.

Comments: Submitted to Engineering with Computers

Towards smaller, faster decoder-only transformers: Architectural variants and their implications

Authors: Sathya Krishnan Suresh, Shunmugapriya P

Abstract: In recent times, the research on Large Language Models (LLMs) has grown exponentially, predominantly focusing on models underpinned by the transformer architecture, as established by [1], and further developed through the decoder-only variations by [2]. Contemporary efforts in this field primarily aim to enhance model capabilities by scaling up both the architecture and data volumes utilized durin… ▽ More In recent times, the research on Large Language Models (LLMs) has grown exponentially, predominantly focusing on models underpinned by the transformer architecture, as established by [1], and further developed through the decoder-only variations by [2]. Contemporary efforts in this field primarily aim to enhance model capabilities by scaling up both the architecture and data volumes utilized during training. However, the exploration into reduce these model sizes while preserving their efficacy remains scant. In this study, we introduce three modifications to the decoder-only transformer architecture, namely ParallelGPT (pgpt), LinearGPT (lgpt), and ConvGPT (cgpt). These variants demonstrate comparable performance to the conventional architecture in language generation, yet benefit from reduced model sizes and faster training processes. We open-source the model weights and the complete codebase for these implementation for further research. △ Less

Submitted 8 October, 2024; v1 submitted 22 April, 2024; originally announced April 2024.

Comments: 10 pages, 6 figures

Physics Event Classification Using Large Language Models

Authors: Cristiano Fanelli, James Giroux, Patrick Moran, Hemalata Nayak, Karthik Suresh, Eric Walter

Abstract: The 2023 AI4EIC hackathon was the culmination of the third annual AI4EIC workshop at The Catholic University of America. This workshop brought together researchers from physics, data science and computer science to discuss the latest developments in Artificial Intelligence (AI) and Machine Learning (ML) for the Electron Ion Collider (EIC), including applications for detectors, accelerators, and ex… ▽ More The 2023 AI4EIC hackathon was the culmination of the third annual AI4EIC workshop at The Catholic University of America. This workshop brought together researchers from physics, data science and computer science to discuss the latest developments in Artificial Intelligence (AI) and Machine Learning (ML) for the Electron Ion Collider (EIC), including applications for detectors, accelerators, and experimental control. The hackathon, held on the final day of the workshop, involved using a chatbot powered by a Large Language Model, ChatGPT-3.5, to train a binary classifier neutrons and photons in simulated data from the \textsc{GlueX} Barrel Calorimeter. In total, six teams of up to four participants from all over the world took part in this intense educational and research event. This article highlights the hackathon challenge, the resources and methodology used, and the results and insights gained from analyzing physics data using the most cutting-edge tools in AI/ML. △ Less

Submitted 4 April, 2024; originally announced April 2024.

Comments: 10 pages, 4 figures

Towards a RAG-based Summarization Agent for the Electron-Ion Collider

Authors: Karthik Suresh, Neeltje Kackar, Luke Schleck, Cristiano Fanelli

Abstract: The complexity and sheer volume of information encompassing documents, papers, data, and other resources from large-scale experiments demand significant time and effort to navigate, making the task of accessing and utilizing these varied forms of information daunting, particularly for new collaborators and early-career scientists. To tackle this issue, a Retrieval Augmented Generation (RAG)--based… ▽ More The complexity and sheer volume of information encompassing documents, papers, data, and other resources from large-scale experiments demand significant time and effort to navigate, making the task of accessing and utilizing these varied forms of information daunting, particularly for new collaborators and early-career scientists. To tackle this issue, a Retrieval Augmented Generation (RAG)--based Summarization AI for EIC (RAGS4EIC) is under development. This AI-Agent not only condenses information but also effectively references relevant responses, offering substantial advantages for collaborators. Our project involves a two-step approach: first, querying a comprehensive vector database containing all pertinent experiment information; second, utilizing a Large Language Model (LLM) to generate concise summaries enriched with citations based on user queries and retrieved data. We describe the evaluation methods that use RAG assessments (RAGAs) scoring mechanisms to assess the effectiveness of responses. Furthermore, we describe the concept of prompt template-based instruction-tuning which provides flexibility and accuracy in summarization. Importantly, the implementation relies on LangChain, which serves as the foundation of our entire workflow. This integration ensures efficiency and scalability, facilitating smooth deployment and accessibility for various user groups within the Electron Ion Collider (EIC) community. This innovative AI-driven framework not only simplifies the understanding of vast datasets but also encourages collaborative participation, thereby empowering researchers. As a demonstration, a web application has been developed to explain each stage of the RAG Agent development in detail. △ Less

Submitted 7 June, 2024; v1 submitted 23 March, 2024; originally announced March 2024.

Comments: updated title to have no latex formatting and added acknowledgements

GdAlSi: An antiferromagnetic topological Weyl semimetal with non-relativistic spin splitting

Authors: Jadupati Nag, Bishal Das, Sayantika Bhowal, Yukimi Nishioka, Barnabha Bandyopadhyay, Saugata Sarker, Shiv Kumar, Kenta Kuroda, Venkatraman Gopalan, Akio Kimura, K. G. Suresh, Aftab Alam

Abstract: Spintronics has emerged as a viable alternative to traditional electronics based technologies in the past few decades. While on one hand, the discovery of topological phases of matter with protected spin-polarized states has opened up exciting prospects, recent revelation of intriguing non-relativistic spin splitting in collinear antiferromagnetic materials with unique symmetries facilitate a wide… ▽ More Spintronics has emerged as a viable alternative to traditional electronics based technologies in the past few decades. While on one hand, the discovery of topological phases of matter with protected spin-polarized states has opened up exciting prospects, recent revelation of intriguing non-relativistic spin splitting in collinear antiferromagnetic materials with unique symmetries facilitate a wide possibility of realizing both these features simultaneously. In this work, we report the co-existence of these two intriguing properties within a single material: GdAlSi. It crystallizes in a body-centered tetragonal structure with a non-centrosymmetric space group $I4_{1}md$ ($109$), which is confirmed using detailed structural analysis through X-ray diffraction (XRD) and optical second harmonic generation (SHG) measurements. The magnetization data indicates AFM ordering with an ordering temperature ($T_N$) $\sim$ 32 K. Ab-initio calculations reveal GdAlSi to be a collinear antiferromagnetic Weyl semimetal with an unconventional, momentum-dependent spin splitting, also referred to as altermagnet. Angle-resolved photoemission spectroscopy measurements on GdAlSi single crystals subsequently confirm the presence of Fermi arcs, a distinctive hallmark of Weyl semimetals. Electric and magnetic multipole analysis provides a deeper understanding of the symmetry-mediated, momentum-dependent spin splitting, which has strictly non-relativistic origin. To the best of our knowledge, such co-existence of unconventional antiferromagnetic order and non-trivial topology is unprecedented and has never been observed before in a single material, rendering GdAlSi a special and promising candidate material. We propose a device harnessing these features, poised to enable practical and efficient topotronic applications. △ Less

Submitted 27 August, 2024; v1 submitted 19 December, 2023; originally announced December 2023.

Comments: 24 pages (14 pages main, 10 pages supplement), 15 figures (7 figures main, 8 figures supplement)

Experimental study of the binding energy of NH3 on different types of ice and its impact on the snow line of NH3 and H2O

Authors: S. Kakkenpara Suresh, F. Dulieu, J. Vitorino, P. Caselli

Abstract: N-bearing molecules (like N2H+ or NH3) are excellent tracers of high-density, low-temperature regions like dense cloud cores and could shed light into snowlines in protoplanetary disks and the chemical evolution of comets. However, uncertainties exist about the grain surface chemistry of these molecules -- which could play an important role in their formation and evolution. This study explores exp… ▽ More N-bearing molecules (like N2H+ or NH3) are excellent tracers of high-density, low-temperature regions like dense cloud cores and could shed light into snowlines in protoplanetary disks and the chemical evolution of comets. However, uncertainties exist about the grain surface chemistry of these molecules -- which could play an important role in their formation and evolution. This study explores experimentally the behaviour of NH$_3$ on surfaces mimicking grains under interstellar conditions alongside other major interstellar ice components (ie. H$_2$O, CO, CO$_2$). We performed co-deposition experiments using the Ultra High Vacuum (UHV) setup VENUS (VErs des NoUvelles Syntheses) of NH$_3$ along with other adsorbates (here, H$_2$O, $^{13}$CO and CO$_2$) and performed Temperature Programmed Desorption (TPD) and Temperature Programmed-During Exposure Desorption (TP-DED) experiments. We obtained binding Energy (BE) distribution of NH$_3$ on Crystalline Ice(CI) and compact-Amorphous Solid Water (c-ASW) by analyses of the TPD profiles of NH3 on the substrates. We observe a significant delay in the desorption and a decrease in the desorption rate of NH$_3$ when H$_2$O is introduced into the co-deposited mixture of NH$_3$-$^{13}$Co or NH$_3$-CO$_2$, absent without H$_2$O. Secondly, H$_2$O traps nearly 5-9 per cent of the co-deposited NH3, released during water's amorphous-to-crystalline phase change. Thirdly, for CI, we obtained a BE distribution between 3780K-4080K, and c-ASW between 3780K-5280K -- using a pre-exponential factor A = 1.94$\times 10^{15}$/s. We conclude that NH$_3$ behaviour is significantly influenced by the presence of H$_2$O due to the formation of hydrogen bonds, in line with quantum calculations. This interaction preserves NH$_3$ on grain surfaces to higher temperatures making it available to the central protostar in protoplanetary disks. It also explains why NH$_3$ freeze out in pre-stellar cores is efficient. △ Less

Submitted 30 November, 2023; originally announced November 2023.

Greedy Perspectives: Multi-Drone View Planning for Collaborative Perception in Cluttered Environments

Authors: Krishna Suresh, Aditya Rauniyar, Micah Corah, Sebastian Scherer

Abstract: Deployment of teams of aerial robots could enable large-scale filming of dynamic groups of people (actors) in complex environments for applications in areas such as team sports and cinematography. Toward this end, methods for submodular maximization via sequential greedy planning can enable scalable optimization of camera views across teams of robots but face challenges with efficient coordination… ▽ More Deployment of teams of aerial robots could enable large-scale filming of dynamic groups of people (actors) in complex environments for applications in areas such as team sports and cinematography. Toward this end, methods for submodular maximization via sequential greedy planning can enable scalable optimization of camera views across teams of robots but face challenges with efficient coordination in cluttered environments. Obstacles can produce occlusions and increase chances of inter-robot collision which can violate requirements for near-optimality guarantees. To coordinate teams of aerial robots in filming groups of people in dense environments, a more general view-planning approach is required. We explore how collision and occlusion impact performance in filming applications through the development of a multi-robot multi-actor view planner with an occlusion-aware objective for filming groups of people and compare with a formation planner and a greedy planner that ignores inter-robot collisions. We evaluate our approach based on five test environments and complex multi-actor behaviors. Compared with a formation planner, our sequential planner generates 14% greater view reward for filming the actors in three scenarios and comparable performance to formation planning on two others. We also observe near identical view rewards for sequential planning both with and without inter-robot collision constraints which indicates that robots are able to avoid collisions without impairing performance in the perception task. Overall, we demonstrate effective coordination of teams of aerial robots in environments cluttered with obstacles that may cause collisions or occlusions and for filming groups that may split, merge, or spread apart. △ Less

Submitted 10 September, 2024; v1 submitted 16 October, 2023; originally announced October 2023.

Comments: IROS'24; 8 pages, 8 figures, 2 tables

The Invisible Map: Visual-Inertial SLAM with Fiducial Markers for Smartphone-based Indoor Navigation

Authors: Paul Ruvolo, Ayush Chakraborty, Rucha Dave, Richard Li, Duncan Mazza, Xierui Shen, Raiyan Siddique, Krishna Suresh

Abstract: We present a system for creating building-scale, easily navigable 3D maps using mainstream smartphones. In our approach, we formulate the 3D-mapping problem as an instance of Graph SLAM and infer the position of both building landmarks (fiducial markers) and navigable paths through the environment (phone poses). Our results demonstrate the system's ability to create accurate 3D maps. Further, we h… ▽ More We present a system for creating building-scale, easily navigable 3D maps using mainstream smartphones. In our approach, we formulate the 3D-mapping problem as an instance of Graph SLAM and infer the position of both building landmarks (fiducial markers) and navigable paths through the environment (phone poses). Our results demonstrate the system's ability to create accurate 3D maps. Further, we highlight the importance of careful selection of mapping hyperparameters and provide a novel technique for tuning these hyperparameters to adapt our algorithm to new environments. △ Less

Submitted 16 October, 2023; originally announced October 2023.

Computing a Sparse Approximate Inverse on Quantum Annealing Machines

Authors: Sanjay Suresh, Krishnan Suresh

Abstract: Many engineering problems involve solving large linear systems of equations. Conjugate gradient (CG) is one of the most popular iterative methods for solving such systems. However, CG typically requires a good preconditioner to speed up convergence. One such preconditioner is the sparse approximate inverse (SPAI). In this paper, we explore the computation of an SPAI on quantum annealing machines… ▽ More Many engineering problems involve solving large linear systems of equations. Conjugate gradient (CG) is one of the most popular iterative methods for solving such systems. However, CG typically requires a good preconditioner to speed up convergence. One such preconditioner is the sparse approximate inverse (SPAI). In this paper, we explore the computation of an SPAI on quantum annealing machines by solving a series of quadratic unconstrained binary optimization (QUBO) problems. Numerical experiments are conducted using both well-conditioned and poorly-conditioned linear systems arising from a 2D finite difference formulation of the Poisson problem. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Comments: 16 pages, 8 figures

TOMAS: Topology Optimization of Multiscale Fluid Devices using Variational Autoencoders and Super-Shapes

Authors: Rahul Kumar Padhy, Krishnan Suresh, Aaditya Chandrasekhar

Abstract: In this paper, we present a framework for multiscale topology optimization of fluid-flow devices. The objective is to minimize dissipated power, subject to a desired contact-area. The proposed strategy is to design optimal microstructures in individual finite element cells, while simultaneously optimizing the overall fluid flow. In particular, parameterized super-shape microstructures are chosen h… ▽ More In this paper, we present a framework for multiscale topology optimization of fluid-flow devices. The objective is to minimize dissipated power, subject to a desired contact-area. The proposed strategy is to design optimal microstructures in individual finite element cells, while simultaneously optimizing the overall fluid flow. In particular, parameterized super-shape microstructures are chosen here to represent microstructures since they exhibit a wide range of permeability and contact area. To avoid repeated homogenization, a finite set of these super-shapes are analyzed a priori, and a variational autoencoder (VAE) is trained on their fluid constitutive properties (permeability), contact area and shape parameters. The resulting differentiable latent space is integrated with a coordinate neural network to carry out a global multi-scale fluid flow optimization. The latent space enables the use of new microstructures that were not present in the original data-set. The proposed method is illustrated using numerous examples in 2D. △ Less

Submitted 15 September, 2023; originally announced September 2023.

Variational Quantum Linear Solver enhanced Quantum Support Vector Machine

Authors: Jianming Yi, Kalyani Suresh, Ali Moghiseh, Norbert Wehn

Abstract: Quantum Support Vector Machines (QSVM) play a vital role in using quantum resources for supervised machine learning tasks, such as classification. However, current methods are strongly limited in terms of scalability on Noisy Intermediate Scale Quantum (NISQ) devices. In this work, we propose a novel approach called the Variational Quantum Linear Solver (VQLS) enhanced QSVM. This is built upon our… ▽ More Quantum Support Vector Machines (QSVM) play a vital role in using quantum resources for supervised machine learning tasks, such as classification. However, current methods are strongly limited in terms of scalability on Noisy Intermediate Scale Quantum (NISQ) devices. In this work, we propose a novel approach called the Variational Quantum Linear Solver (VQLS) enhanced QSVM. This is built upon our idea of utilizing the variational quantum linear solver to solve system of linear equations of a least squares-SVM on a NISQ device. The implementation of our approach is evaluated by an extensive series of numerical experiments with the Iris dataset, which consists of three distinct iris plant species. Based on this, we explore the practicality and effectiveness of our algorithm by constructing a classifier capable of classification in a feature space ranging from one to seven dimensions. Furthermore, by strategically exploiting both classical and quantum computing for various subroutines of our algorithm, we effectively mitigate practical challenges associated with the implementation. These include significant improvement in the trainability of the variational ansatz and notable reductions in run-time for cost calculations. Based on the numerical experiments, our approach exhibits the capability of identifying a separating hyperplane in an 8-dimensional feature space. Moreover, it consistently demonstrated strong performance across various instances with the same dataset. △ Less

Submitted 14 September, 2023; originally announced September 2023.

Search for axion-like particles through nuclear Primakoff production using the GlueX detector

Authors: J. R. Pybus, T. Kolar, B. Devkota, P. Sharp, B. Yu, O. Hen, E. Piasetzky, S. N. Santiesteban, A. Schmidt, A. Somov, Y. Soreq, H. Szumila-Vance, C. S. Akondi, C. Ayerbe Gayoso, V. V. Berdnikov, H. Bhatt, D. Bhetuwal, M. M. Dalton, A. Deur, R. Dotel, C. Fanelli, J. Guo, T. J. Hague, D. W. Higinbotham, N. D. Hoffman , et al. (18 additional authors not shown)

Abstract: We report on the results of the first search for the production of axion-like particles (ALP) via Primakoff production on nuclear targets using the GlueX detector. This search uses an integrated luminosity of 100 pb$^{-1}\cdot$nucleon on a $^{12}$C target, and explores the mass region of 200 < $m_a$ < 450 MeV via the decay $X\rightarrowγγ$. This mass range is between the $π^0$ and $η$ masses, whic… ▽ More We report on the results of the first search for the production of axion-like particles (ALP) via Primakoff production on nuclear targets using the GlueX detector. This search uses an integrated luminosity of 100 pb$^{-1}\cdot$nucleon on a $^{12}$C target, and explores the mass region of 200 < $m_a$ < 450 MeV via the decay $X\rightarrowγγ$. This mass range is between the $π^0$ and $η$ masses, which enables the use of the measured $η$ production rate to obtain absolute bounds on the ALP production with reduced sensitivity to experimental luminosity and detection efficiency. We find no evidence for an ALP, consistent with previous searches in the quoted mass range, and present limits on the coupling on the scale of $O$(1 TeV). We further find that the ALP production limit we obtain is hindered by the peaking structure of the non-target-related dominant background in GlueX, which we treat by using data on $^4$He to estimate and subtract these backgrounds. We comment on how this search can be improved in a future higher-statistics dedicated measurement. △ Less

Submitted 11 August, 2023; originally announced August 2023.

Artificial Intelligence for the Electron Ion Collider (AI4EIC)

Authors: C. Allaire, R. Ammendola, E. -C. Aschenauer, M. Balandat, M. Battaglieri, J. Bernauer, M. Bondì, N. Branson, T. Britton, A. Butter, I. Chahrour, P. Chatagnon, E. Cisbani, E. W. Cline, S. Dash, C. Dean, W. Deconinck, A. Deshpande, M. Diefenthaler, R. Ent, C. Fanelli, M. Finger, M. Finger, Jr., E. Fol, S. Furletov , et al. (70 additional authors not shown)

Abstract: The Electron-Ion Collider (EIC), a state-of-the-art facility for studying the strong force, is expected to begin commissioning its first experiments in 2028. This is an opportune time for artificial intelligence (AI) to be included from the start at this facility and in all phases that lead up to the experiments. The second annual workshop organized by the AI4EIC working group, which recently took… ▽ More The Electron-Ion Collider (EIC), a state-of-the-art facility for studying the strong force, is expected to begin commissioning its first experiments in 2028. This is an opportune time for artificial intelligence (AI) to be included from the start at this facility and in all phases that lead up to the experiments. The second annual workshop organized by the AI4EIC working group, which recently took place, centered on exploring all current and prospective application areas of AI for the EIC. This workshop is not only beneficial for the EIC, but also provides valuable insights for the newly established ePIC collaboration at EIC. This paper summarizes the different activities and R&D projects covered across the sessions of the workshop and provides an overview of the goals, approaches and strategies regarding AI/ML in the EIC community, as well as cutting-edge techniques currently studied in other experiments. △ Less

Submitted 17 July, 2023; originally announced July 2023.

Comments: 27 pages, 11 figures, AI4EIC workshop, tutorials and hackathon

A Unique Approach to Classify Inflationary Potentials

Authors: Somnath Das, P K Suresh

Abstract: Inflationary cosmology has made significant strides in understanding the physics driving the rapid expansion of the early universe. However, many inflation models with diverse potential shapes present analysis, comparison, and classification challenges. In this paper, we propose a novel approach to tackle this issue. We introduce a general potential formula encompassing all inflationary potentials… ▽ More Inflationary cosmology has made significant strides in understanding the physics driving the rapid expansion of the early universe. However, many inflation models with diverse potential shapes present analysis, comparison, and classification challenges. In this paper, we propose a novel approach to tackle this issue. We introduce a general potential formula encompassing all inflationary potentials, whether single-field or multi-field, into a single mathematical framework. This formula establishes a unified framework for systematically classifying inflation models based on their potential functions. We showcase the efficacy of the general potential formula by successfully reproducing well-known inflation models, such as the Starobinsky potential and the Valley Hybrid Inflation model. Moreover, we derive general inflationary parameters, including the slow-roll parameters and power spectra, using the proposed formula. Our approach provides a versatile tool for classifying and studying various inflationary scenarios, simplifying the analysis and comparison of different models in the field of inflationary cosmology. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Measurement of Spin-Density Matrix Elements in $ρ(770)$ Production with a Linearly Polarized Photon Beam at $E_γ= 8.2\,-\,8.8\,\text{GeV}$

Authors: GlueX Collaboration, S. Adhikari, F. Afzal, C. S. Akondi, M. Albrecht, M. Amaryan, V. Arroyave, A. Asaturyan, A. Austregesilo, Z. Baldwin, F. Barbosa, J. Barlow, E. Barriga, R. Barsotti, T. D. Beattie, V. V. Berdnikov, T. Black, W. Boeglin, W. J. Briscoe, T. Britton, W. K. Brooks, D. Byer, E. Chudakov, P. L. Cole, O. Cortes , et al. (128 additional authors not shown)

Abstract: The GlueX experiment at Jefferson Lab studies photoproduction of mesons using linearly polarized $8.5\,\text{GeV}$ photons impinging on a hydrogen target which is contained within a detector with near-complete coverage for charged and neutral particles. We present measurements of spin-density matrix elements for the photoproduction of the vector meson $ρ$(770). The statistical precision achieved e… ▽ More The GlueX experiment at Jefferson Lab studies photoproduction of mesons using linearly polarized $8.5\,\text{GeV}$ photons impinging on a hydrogen target which is contained within a detector with near-complete coverage for charged and neutral particles. We present measurements of spin-density matrix elements for the photoproduction of the vector meson $ρ$(770). The statistical precision achieved exceeds that of previous experiments for polarized photoproduction in this energy range by orders of magnitude. We confirm a high degree of $s$-channel helicity conservation at small squared four-momentum transfer $t$ and are able to extract the $t$-dependence of natural and unnatural-parity exchange contributions to the production process in detail. We confirm the dominance of natural-parity exchange over the full $t$ range. We also find that helicity amplitudes in which the helicity of the incident photon and the photoproduced $ρ(770)$ differ by two units are negligible for $-t<0.5\,\text{GeV}^{2}/c^{2}$. △ Less

Submitted 9 July, 2024; v1 submitted 15 May, 2023; originally announced May 2023.

Comments: 15 pages, 11 figures

Journal ref: Phys. Rev. C 108, 055204 (2023)

Measurement of the J/$ψ$ photoproduction cross section over the full near-threshold kinematic region

Authors: GlueX Collaboration, S. Adhikari, F. Afzal, C. S. Akondi, M. Albrecht, M. Amaryan, V. Arroyave, A. Asaturyan, A. Austregesilo, Z. Baldwin, F. Barbosa, J. Barlow, E. Barriga, R. Barsotti, T. D. Beattie, V. V. Berdnikov, T. Black, W. Boeglin, W. J. Briscoe, T. Britton, W. K. Brooks, D. Byer, E. Chudakov, P. L. Cole, O. Cortes , et al. (128 additional authors not shown)

Abstract: We report the total and differential cross sections for $J/ψ$ photoproduction with the large acceptance GlueX spectrometer for photon beam energies from the threshold at 8.2~GeV up to 11.44~GeV and over the full kinematic range of momentum transfer squared, $t$. Such coverage facilitates the extrapolation of the differential cross sections to the forward ($t = 0$) point beyond the physical region.… ▽ More We report the total and differential cross sections for $J/ψ$ photoproduction with the large acceptance GlueX spectrometer for photon beam energies from the threshold at 8.2~GeV up to 11.44~GeV and over the full kinematic range of momentum transfer squared, $t$. Such coverage facilitates the extrapolation of the differential cross sections to the forward ($t = 0$) point beyond the physical region. The forward cross section is used by many theoretical models and plays an important role in understanding $J/ψ$ photoproduction and its relation to the $J/ψ-$proton interaction. These measurements of $J/ψ$ photoproduction near threshold are also crucial inputs to theoretical models that are used to study important aspects of the gluon structure of the proton, such as the gluon Generalized Parton Distribution (GPD) of the proton, the mass radius of the proton, and the trace anomaly contribution to the proton mass. We observe possible structures in the total cross section energy dependence and find evidence for contributions beyond gluon exchange in the differential cross section close to threshold, both of which are consistent with contributions from open-charm intermediate states. △ Less

Submitted 9 July, 2024; v1 submitted 7 April, 2023; originally announced April 2023.

Comments: 15 pages 18 figures

Isoparametric Tangled Finite Element Method for Nonlinear Elasticity

Authors: Bhagyashree Prabhune, Krishnan Suresh

Abstract: An important requirement in the standard finite element method (FEM) is that all elements in the underlying mesh must be tangle-free i.e., the Jacobian must be positive throughout each element. To relax this requirement, an isoparametric tangled finite element method (i-TFEM) was recently proposed for linear elasticity problems. It was demonstrated that i-TFEM leads to optimal convergence even for… ▽ More An important requirement in the standard finite element method (FEM) is that all elements in the underlying mesh must be tangle-free i.e., the Jacobian must be positive throughout each element. To relax this requirement, an isoparametric tangled finite element method (i-TFEM) was recently proposed for linear elasticity problems. It was demonstrated that i-TFEM leads to optimal convergence even for severely tangled meshes. In this paper, i-TFEM is generalized to nonlinear elasticity. Specifically, a variational formulation is proposed that leads to local modification in the tangent stiffness matrix associated with tangled elements, and an additional piece-wise compatibility constraint. i-TFEM reduces to standard FEM for tangle-free meshes. The effectiveness and convergence characteristics of i-TFEM are demonstrated through a series of numerical experiments, involving both compressible and in-compressible problems. △ Less

Submitted 19 March, 2023; originally announced March 2023.

Spin-valve nature and giant coercivity of a ferrimagnetic spin semimetal Mn$_2$IrGa

Authors: Akhilesh Kumar Patel, Y. Venkateswara, S. Shanmukharao Samatham, Archana Lakhani, Jayita Nayak, K. G. Suresh, Aftab Alam

Abstract: Spin semimetals are amongst the most recently discovered new class of spintronic materials, which exhibit a band gap in one spin channel and semimetallic feature in the other, thus facilitating tunable spin transport. Here, we report Mn$_2$IrGa to be a candidate material for spin semimetal along with giant coercivity and spin-valve characteristics using a combined experimental and theoretical stu… ▽ More Spin semimetals are amongst the most recently discovered new class of spintronic materials, which exhibit a band gap in one spin channel and semimetallic feature in the other, thus facilitating tunable spin transport. Here, we report Mn$_2$IrGa to be a candidate material for spin semimetal along with giant coercivity and spin-valve characteristics using a combined experimental and theoretical study. The alloy crystallizes in an inverse Heusler structure (without any martensitic transition) with a para- to ferri-magnetic transition at $T_\mathrm{C} \sim$ 243 K. It shows a giant coercive field of about 8.5 kOe (at 2 K). The negative temperature coefficient, relatively low magnitude and weak temperture dependance of electrical resistivity suggest the semimetallic character of the alloy. This is further supported by our specific heat measurement. Magnetoresistance (MR) confirms an irreversible nature (with its magnitude $\sim$1\%) along with a change of sign across the magnetic transition indicating the potentiality of Mn$_2$IrGa in magnetic switching applications. In addition, asymmetric nature of MR in the positive and negative field cycles is indicative of spin-valve characteristics. Our ab-initio calculations confirm the inverse Heusler structure with ferrimagnetic ordering to be the lowest energy state, with a saturation magnetization of 2 $μ_\mathrm{B}$. $<100>$ is found to be the easy magnetic axis with considerable magneto-crystalline anisotropy energy. A large positive Berry flux at/around $Γ$ point gives rise to an appreciable anomalous Hall conductivity ($\sim$-180 S/cm). △ Less

Submitted 1 June, 2023; v1 submitted 8 March, 2023; originally announced March 2023.

Comments: Mn2IrGa, Inverse Heusler alloys, Giant Coercivity, Ferrimagnets, Spin Semimetal, Spin valve, Fleur, FLAPW, Spintronics

A possible solution to the Hubble tension from quantum gravity

Authors: Anupama B, P K Suresh

Abstract: We investigate the relevance of quantum gravity during inflation to address the Hubble tension that arises from Planck 2018 and SH0ES data sets. We show that the effect of quantum gravity during inflation can increase the rate of change of $H_0$, thereby accounting for a wide range of observed $H_0$. Further, we show that due to the quantum gravity effect on inflation, the temperature at the onset… ▽ More We investigate the relevance of quantum gravity during inflation to address the Hubble tension that arises from Planck 2018 and SH0ES data sets. We show that the effect of quantum gravity during inflation can increase the rate of change of $H_0$, thereby accounting for a wide range of observed $H_0$. Further, we show that due to the quantum gravity effect on inflation, the temperature at the onset of reheating can be lower than the standard case, causing delays in the reheating process. The role of quantum gravity is inevitable in settling the Hubble tension. The results of the present study may find use in resolving the Hubble tension, in validating inflationary model and quantum gravity. △ Less

Submitted 5 February, 2024; v1 submitted 6 March, 2023; originally announced March 2023.

Comments: A new paragraph is added in the introduction part and fig. 7 is replaced with a new one. 19 pages, 10 figures

Journal ref: Class. Quantum Grav. 41 (2024) 035002

A Semantics for Counterfactuals in Quantum Causal Models

Authors: Ardra Kooderi Suresh, Markus Frembs, Eric G. Cavalcanti

Abstract: We introduce a formalism for the evaluation of counterfactual queries in the framework of quantum causal models, generalising Pearl's semantics for counterfactuals in classical causal models, thus completing the last rung in the quantum analogue of Pearl's "ladder of causation". To this end, we define a suitable extension of Pearl's notion of a 'classical structural causal model', which we denote… ▽ More We introduce a formalism for the evaluation of counterfactual queries in the framework of quantum causal models, generalising Pearl's semantics for counterfactuals in classical causal models, thus completing the last rung in the quantum analogue of Pearl's "ladder of causation". To this end, we define a suitable extension of Pearl's notion of a 'classical structural causal model', which we denote analogously by 'quantum structural causal model', and a corresponding extension of Pearl's three-step procedure of abduction, action, and prediction. We show that every classical (probabilistic) structural causal model can be extended to a quantum structural causal model, and prove that counterfactual queries that can be formulated within a classical structural causal model agree with their corresponding queries in the quantum extension -- but the latter is more expressive. Counterfactuals in quantum causal models come in different forms: we distinguish between active and passive counterfactual queries, depending on whether or not an intervention is to be performed in the action step. This is in contrast to the classical case, where counterfactuals are always interpreted in the active sense. Another distinctive feature of our formalism is that it breaks the connection between causal and counterfactual dependence that exists in the classical case: quantum counterfactuals allow for counterfactual dependence without causal dependence. This distinction between classical and quantum causal models may shed light on how the latter can reproduce quantum correlations that violate Bell inequalities while being faithful to the relativistic causal structure. △ Less

Submitted 17 September, 2024; v1 submitted 23 February, 2023; originally announced February 2023.

Comments: 29+4 pages, 11 figures. v2: extensively rewritten manuscript, including new definitions of some of the key concepts, and new discussions

CoRuVSi: A potential candidate for spin semimetal with promising spintronic and thermoelectric properties

Authors: Jadupati Nag, R. Venkatesh, Ajay Jha, Plamen Stamenov, P. D. Babu, Aftab Alam, K. G. Suresh

Abstract: Based on our experimental and theoretical studies, we report the identification of the quaternary Heusler alloy, CoRuVSi as a new member of the recently discovered spin semimetals class. Spin polarised semimetals possess a unique band structure in which one of the spin bands shows semimetallic nature, while the other shows semiconducting/insulating nature. Our findings show that CoRuVSi possesses… ▽ More Based on our experimental and theoretical studies, we report the identification of the quaternary Heusler alloy, CoRuVSi as a new member of the recently discovered spin semimetals class. Spin polarised semimetals possess a unique band structure in which one of the spin bands shows semimetallic nature, while the other shows semiconducting/insulating nature. Our findings show that CoRuVSi possesses interesting spintronic and thermoelectric properties. Magnetization data reveal a weak ferri-/antiferro magnetic ordering at low temperatures, with only a very small moment $\sim$ 0.13 $μ_B$/f.u., attributed to the disorder. Transport results provide strong evidence of semimetallicity dominated by two-band conduction, while magnetoresistance data show a non-saturating, linear, positive, magnetoresistance. Spin polarization measurements using point-contact Andreev reflection spectra reveal a reasonably high spin polarization of $\sim$ 50\%, which matches fairly well with the simulated result. Furthermore, CoRuVSi shows a high thermopower value of $0.7$ $m Watt/ m-K^{2}$ at room temperature with the dominant contribution from the semimetallic bands, rendering it as a promising thermoelectric material as well. Our ab-initio simulation not only confirms a unique semimetallic feature, but also reveals that the band structure hosts a linear band crossing at $\sim$ -0.4 eV below the Fermi level incorporated by a band-inversion. In addition, the observed topological non-trivial features of the band structure is corroborated with the simulated Berry curvature, intrinsic anomalous Hall conductivity and the Fermi surface. The coexistence of many interesting properties relevant for spintronic, topological and thermoelectric applications in a single material is extremely rare and hence this study could promote a similar strategy to identify other potential materials belonging to same class. △ Less

Submitted 14 January, 2023; originally announced January 2023.

Griffiths' phase behavior of the Weyl semimetal CrFeVGa

Authors: Jadupati Nag, P. C. Sreeparvathy, R. Venkatesh, P. D. Babu, K. G. Suresh, Aftab Alam

Abstract: We report a combined theoretical and experimental study of a new topological semimetal CrFeVGa with an emphasis on the role of atomic disorder on the magnetoelectronic properties and its applications.CrFeVGa belongs to the quaternary Heusler alloy family and crystallizes in the cubic structure. Synchrotron XRD measurement confirms B2 disorder, which plays a crucial role in dictating the electronic… ▽ More We report a combined theoretical and experimental study of a new topological semimetal CrFeVGa with an emphasis on the role of atomic disorder on the magnetoelectronic properties and its applications.CrFeVGa belongs to the quaternary Heusler alloy family and crystallizes in the cubic structure. Synchrotron XRD measurement confirms B2 disorder, which plays a crucial role in dictating the electronic and magnetic properties of the system. △ Less

Submitted 14 December, 2022; originally announced December 2022.

FeRhCrSi: A new spin semimetal with room temperature spin-valve behavior

Authors: Y. Venkateswara, Jadupati Nag, S. Shanmukharao Samatham, Akhilesh Kumar Patel, P. D. Babu, Manoj Raama Varma, Jayita Nayak, K. G. Suresh, Aftab Alam

Abstract: Spin semimetals are a recently discovered new class of spintronic materials, which exhibit a band gap in one spin channel while a semimetallic feature in the other and thus allows for tunable spin transport. Here, we present experimental verification of spin semimetallic behavior in FeRhCrSi, a quaternary Heusler alloy with saturation moment 2 $μ_B$ and Curie temperature $>$ 400 K. It crystallises… ▽ More Spin semimetals are a recently discovered new class of spintronic materials, which exhibit a band gap in one spin channel while a semimetallic feature in the other and thus allows for tunable spin transport. Here, we present experimental verification of spin semimetallic behavior in FeRhCrSi, a quaternary Heusler alloy with saturation moment 2 $μ_B$ and Curie temperature $>$ 400 K. It crystallises in the L2$_1$ structure with 50$\%$ antisite disorder between Fe and Rh. Below 300 K, it shows a weakly temperature dependent electrical resistivity with negative temperature coefficient, indicating the normal semimetal or spin semimetal behavior. Anomalous magnetoresistance data reveals dominant contribution from asymmetric part, a clear signature of spin-valve nature, which is retained even at room temperature. \textcolor{black}{The asymmetric part of magneto-resistance shows an unusual increase with increasing temperature.} Hall measurements confirm the anomalous nature of conductivity originating from the intrinsic Berry curvature, with holes being the majority carriers. Ab-initio simulation confirms a unique long-range ferrimagnetic ordering to be the ground state, explaining the origin behind the unexpected low saturation moment. The ferrimagnetic disordered structure confirms the spin semimetallic feature of FeRhCrSi, as observed experimentally. △ Less

Submitted 26 January, 2023; v1 submitted 1 December, 2022; originally announced December 2022.

Comments: FeRhCrSi, Quaternary Heusler Alloys, Spin semimetal, Spin valve, Heusler alloys, Half metal, High T_C Heusler alloys, Fleur, FLAPW, unfolded band structure

FluTO: Graded Multiscale Fluid Topology Optimization using Neural Networks

Authors: Rahul Kumar Padhy, Aaditya Chandrasekhar, Krishnan Suresh

Abstract: Fluid-flow devices with low dissipation, but high contact area, are of importance in many applications. A well-known strategy to design such devices is multi-scale topology optimization (MTO), where optimal microstructures are designed within each cell of a discretized domain. Unfortunately, MTO is computationally very expensive since one must perform homogenization of the evolving microstructures… ▽ More Fluid-flow devices with low dissipation, but high contact area, are of importance in many applications. A well-known strategy to design such devices is multi-scale topology optimization (MTO), where optimal microstructures are designed within each cell of a discretized domain. Unfortunately, MTO is computationally very expensive since one must perform homogenization of the evolving microstructures, during each step of the homogenization process. As an alternate, we propose here a graded multiscale topology optimization (GMTO) for designing fluid-flow devices. In the proposed method, several pre-selected but size-parameterized and orientable microstructures are used to fill the domain optimally. GMTO significantly reduces the computation while retaining many of the benefits of MTO. In particular, GMTO is implemented here using a neural-network (NN) since: (1) homogenization can be performed off-line, and used by the NN during optimization, (2) it enables continuous switching between microstructures during optimization, (3) the number of design variables and computational effort is independent of number of microstructure used, and, (4) it supports automatic differentiation, thereby eliminating manual sensitivity analysis. Several numerical results are presented to illustrate the proposed framework. △ Less

Submitted 16 September, 2022; originally announced September 2022.

Design of the ECCE Detector for the Electron Ion Collider

Authors: J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin, R. Capobianco , et al. (259 additional authors not shown)

Abstract: The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent track… ▽ More The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector. △ Less

Submitted 20 July, 2024; v1 submitted 6 September, 2022; originally announced September 2022.

Comments: 34 pages, 30 figures, 9 tables

Report number: JLAB-PHY-24-4124

Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept

Authors: A. Bylinkin, C. T. Dean, S. Fegan, D. Gangadharan, K. Gates, S. J. D. Kay, I. Korover, W. B. Li, X. Li, R. Montgomery, D. Nguyen, G. Penman, J. R. Pybus, N. Santiesteban, R. Trotta, A. Usman, M. D. Baker, J. Frantz, D. I. Glazier, D. W. Higinbotham, T. Horn, J. Huang, G. Huber, R. Reed, J. Roche , et al. (258 additional authors not shown)

Abstract: This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fr… ▽ More This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector. △ Less

Submitted 6 March, 2023; v1 submitted 30 August, 2022; originally announced August 2022.

Generic Approach to Visualization of Time Series Data

Authors: Sathya Krishnan Suresh, Shunmugapriya P

Abstract: Time series is a collection of data instances that are ordered according to a time stamp. Stock prices, temperature, etc are examples of time series data in real life. Time series data are used for forecasting sales, predicting trends. Visualization is the process of visually representing data or the relationship between features of a data either in a two-dimensional plot or a three-dimensional pl… ▽ More Time series is a collection of data instances that are ordered according to a time stamp. Stock prices, temperature, etc are examples of time series data in real life. Time series data are used for forecasting sales, predicting trends. Visualization is the process of visually representing data or the relationship between features of a data either in a two-dimensional plot or a three-dimensional plot. Visualizing the time series data constitutes an important part of the process for working with a time series dataset. Visualizing the data not only helps in the modelling process but it can also be used to identify trends and features that cause those trends. In this work, we take a real-life time series dataset and analyse how the target feature relates to other features of the dataset through visualization. From the work that has been carried out, we present an effective method of visualization for time series data which will be much useful for machine learning modelling with such datasets. △ Less

Submitted 24 April, 2024; v1 submitted 25 July, 2022; originally announced July 2022.

Comments: 5 pages. International Conference on Engineering and Advancement in Technology-2022

ECCE unpolarized TMD measurements

Authors: R. Seidl, A. Vladimirov, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari , et al. (258 additional authors not shown)

Abstract: We performed feasibility studies for various measurements that are related to unpolarized TMD distribution and fragmentation functions. The processes studied include semi-inclusive Deep inelastic scattering (SIDIS) where single hadrons (pions and kaons) were detected in addition to the scattered DIS lepton. The single hadron cross sections and multiplicities were extracted as a function of the DIS… ▽ More We performed feasibility studies for various measurements that are related to unpolarized TMD distribution and fragmentation functions. The processes studied include semi-inclusive Deep inelastic scattering (SIDIS) where single hadrons (pions and kaons) were detected in addition to the scattered DIS lepton. The single hadron cross sections and multiplicities were extracted as a function of the DIS variables $x$ and $Q^2$, as well as the semi-inclusive variables $z$, which corresponds to the momentum fraction the detected hadron carries relative to the struck parton and $P_T$, which corresponds to the transverse momentum of the detected hadron relative to the virtual photon. The expected statistical precision of such measurements is extrapolated to accumulated luminosities of 10 fb$^{-1}$ and potential systematic uncertainties are approximated given the deviations between true and reconstructed yields. △ Less

Submitted 22 July, 2022; originally announced July 2022.

Comments: 12 pages, 9 figures, to be submitted in joint ECCE proposal NIM-A volume

Report number: ecce-paper-phys-2022-09

ECCE Sensitivity Studies for Single Hadron Transverse Single Spin Asymmetry Measurements

Authors: R. Seidl, A. Vladimirov, D. Pitonyak, A. Prokudin, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks , et al. (260 additional authors not shown)

Abstract: We performed feasibility studies for various single transverse spin measurements that are related to the Sivers effect, transversity and the tensor charge, and the Collins fragmentation function. The processes studied include semi-inclusive deep inelastic scattering (SIDIS) where single hadrons (pions and kaons) were detected in addition to the scattered DIS lepton. The data were obtained in {\sc… ▽ More We performed feasibility studies for various single transverse spin measurements that are related to the Sivers effect, transversity and the tensor charge, and the Collins fragmentation function. The processes studied include semi-inclusive deep inelastic scattering (SIDIS) where single hadrons (pions and kaons) were detected in addition to the scattered DIS lepton. The data were obtained in {\sc pythia}6 and {\sc geant}4 simulated e+p collisions at 18 GeV on 275 GeV, 18 on 100, 10 on 100, and 5 on 41 that use the ECCE detector configuration. Typical DIS kinematics were selected, most notably $Q^2 > 1 $ GeV$^2$, and cover the $x$ range from $10^{-4}$ to $1$. The single spin asymmetries were extracted as a function of $x$ and $Q^2$, as well as the semi-inclusive variables $z$, and $P_T$. They are obtained in azimuthal moments in combinations of the azimuthal angles of the hadron transverse momentum and transverse spin of the nucleon relative to the lepton scattering plane. The initially unpolarized MonteCarlo was re-weighted in the true kinematic variables, hadron types and parton flavors based on global fits of fixed target SIDIS experiments and $e^+e^-$ annihilation data. The expected statistical precision of such measurements is extrapolated to 10 fb$^{-1}$ and potential systematic uncertainties are approximated given the deviations between true and reconstructed yields. The impact on the knowledge of the Sivers functions, transversity and tensor charges, and the Collins function has then been evaluated in the same phenomenological extractions as in the Yellow Report. The impact is found to be comparable to that obtained with the parameterized Yellow Report detector and shows that the ECCE detector configuration can fulfill the physics goals on these quantities. △ Less

Submitted 22 July, 2022; originally announced July 2022.

Comments: 22 pages, 22 figures, to be submitted to joint ECCE proposal NIM-A volume

Report number: ecce-paper-phys-2022-08

Open Heavy Flavor Studies for the ECCE Detector at the Electron Ion Collider

Authors: X. Li, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin , et al. (262 additional authors not shown)

Abstract: The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will… ▽ More The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will be presented. The ECCE detector has enabled precise EIC heavy flavor hadron and jet measurements with a broad kinematic coverage. These proposed heavy flavor measurements will help systematically study the hadronization process in vacuum and nuclear medium especially in the underexplored kinematic region. △ Less

Submitted 23 July, 2022; v1 submitted 21 July, 2022; originally announced July 2022.

Comments: Open heavy flavor studies with the EIC reference detector design by the ECCE consortium. 11 pages, 11 figures, to be submitted to the Nuclear Instruments and Methods A

Report number: LANL report number: LA-UR-22-27181

Exclusive J/$ψ$ Detection and Physics with ECCE

Authors: X. Li, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin , et al. (262 additional authors not shown)

Abstract: Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the… ▽ More Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the spatial distribution of gluons in the nucleus. Recently the problem of the origin of hadron mass has received lots of attention in determining the anomaly contribution $M_{a}$. The trace anomaly is sensitive to the gluon condensate, and exclusive production of quarkonia such as J/$ψ$ and $Υ$ can serve as a sensitive probe to constrain it. In this paper, we present the performance of the ECCE detector for exclusive J/$ψ$ detection and the capability of this process to investigate the above physics opportunities with ECCE. △ Less

Submitted 21 July, 2022; originally announced July 2022.

Comments: 11 pages, 14 figures, 1 table

Search for $e\toτ$ Charged Lepton Flavor Violation at the EIC with the ECCE Detector

Authors: J. -L. Zhang, S. Mantry, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari , et al. (262 additional authors not shown)

Abstract: The recently approved Electron-Ion Collider (EIC) will provide a unique new opportunity for searches of charged lepton flavor violation (CLFV) and other new physics scenarios. In contrast to the $e \leftrightarrow μ$ CLFV transition for which very stringent limits exist, there is still a relatively large discovery space for the $e \to τ$ CLFV transition, potentially to be explored by the EIC. With… ▽ More The recently approved Electron-Ion Collider (EIC) will provide a unique new opportunity for searches of charged lepton flavor violation (CLFV) and other new physics scenarios. In contrast to the $e \leftrightarrow μ$ CLFV transition for which very stringent limits exist, there is still a relatively large discovery space for the $e \to τ$ CLFV transition, potentially to be explored by the EIC. With the latest detector design of ECCE (EIC Comprehensive Chromodynamics Experiment) and projected integral luminosity of the EIC, we find the $τ$-leptons created in the DIS process $ep\to τX$ are expected to be identified with high efficiency. A first ECCE simulation study, restricted to the 3-prong $τ$-decay mode and with limited statistics for the Standard Model backgrounds, estimates that the EIC will be able to improve the current exclusion limit on $e\to τ$ CLFV by an order of magnitude. △ Less

Submitted 20 July, 2022; originally announced July 2022.

Comments: 11 pages, 8 figures, to be submitted to NIM

Design and Simulated Performance of Calorimetry Systems for the ECCE Detector at the Electron Ion Collider

Authors: F. Bock, N. Schmidt, P. K. Wang, N. Santiesteban, T. Horn, J. Huang, J. Lajoie, C. Munoz Camacho, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, W. Boeglin, M. Borysova, E. Brash , et al. (263 additional authors not shown)

Abstract: We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key… ▽ More We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key calorimeter performances which include energy and position resolutions, reconstruction efficiency, and particle identification will be presented. △ Less

Submitted 19 July, 2022; originally announced July 2022.

Comments: 19 pages, 22 figures, 5 tables

A Generalized Framework for Microstructural Optimization using Neural Networks

Authors: Saketh Sridhara, Aaditya Chandrasekhar, Krishnan Suresh

Abstract: Microstructures, i.e., architected materials, are designed today, typically, by maximizing an objective, such as bulk modulus, subject to a volume constraint. However, in many applications, it is often more appropriate to impose constraints on other physical quantities of interest. In this paper, we consider such generalized microstructural optimization problems where any of the microstructural qu… ▽ More Microstructures, i.e., architected materials, are designed today, typically, by maximizing an objective, such as bulk modulus, subject to a volume constraint. However, in many applications, it is often more appropriate to impose constraints on other physical quantities of interest. In this paper, we consider such generalized microstructural optimization problems where any of the microstructural quantities, namely, bulk, shear, Poisson ratio, or volume, can serve as the objective, while the remaining can serve as constraints. In particular, we propose here a neural-network (NN) framework to solve such problems. The framework relies on the classic density formulation of microstructural optimization, but the density field is represented through the NN's weights and biases. The main characteristics of the proposed NN framework are: (1) it supports automatic differentiation, eliminating the need for manual sensitivity derivations, (2) smoothing filters are not required due to implicit filtering, (3) the framework can be easily extended to multiple-materials, and (4) a high-resolution microstructural topology can be recovered through a simple post-processing step. The framework is illustrated through a variety of microstructural optimization problems. △ Less

Submitted 13 July, 2022; originally announced July 2022.

Towards tangled finite element analysis over partially inverted hexahedral elements

Authors: Bhagyashree Prabhune, Krishnan Suresh

Abstract: If a finite element mesh contains concave elements, it is said to tangled. Tangled meshes can occur during mesh generation, mesh optimization, and large deformation simulations, and will lead to erroneous results during finite element analysis. Recently, the authors introduced the tangled finite element method (TFEM) to accurately handle tangled 2D concave quadrilateral elements. In this paper, TF… ▽ More If a finite element mesh contains concave elements, it is said to tangled. Tangled meshes can occur during mesh generation, mesh optimization, and large deformation simulations, and will lead to erroneous results during finite element analysis. Recently, the authors introduced the tangled finite element method (TFEM) to accurately handle tangled 2D concave quadrilateral elements. In this paper, TFEM is extended to 3D hexahedral elements. We demonstrate that TFEM leads to accurate results over tangled hexahedral elements, requiring minimal changes to existing FEM framework. △ Less

Submitted 8 July, 2022; originally announced July 2022.

Comments: 4 Pages, 6 figures

XLCoST: A Benchmark Dataset for Cross-lingual Code Intelligence

Authors: Ming Zhu, Aneesh Jain, Karthik Suresh, Roshan Ravindran, Sindhu Tipirneni, Chandan K. Reddy

Abstract: Recent advances in machine learning have significantly improved the understanding of source code data and achieved good performance on a number of downstream tasks. Open source repositories like GitHub enable this process with rich unlabeled code data. However, the lack of high quality labeled data has largely hindered the progress of several code related tasks, such as program translation, summar… ▽ More Recent advances in machine learning have significantly improved the understanding of source code data and achieved good performance on a number of downstream tasks. Open source repositories like GitHub enable this process with rich unlabeled code data. However, the lack of high quality labeled data has largely hindered the progress of several code related tasks, such as program translation, summarization, synthesis, and code search. This paper introduces XLCoST, Cross-Lingual Code SnippeT dataset, a new benchmark dataset for cross-lingual code intelligence. Our dataset contains fine-grained parallel data from 8 languages (7 commonly used programming languages and English), and supports 10 cross-lingual code tasks. To the best of our knowledge, it is the largest parallel dataset for source code both in terms of size and the number of languages. We also provide the performance of several state-of-the-art baseline models for each task. We believe this new dataset can be a valuable asset for the research community and facilitate the development and validation of new methods for cross-lingual code intelligence. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Comments: 20 pages, 11 tables, 2 figures