Showing 201–250 of 257 results for author: Sue, T

Identifying Ketamine Responses in Treatment-Resistant Depression Using a Wearable Forehead EEG

Authors: Zehong Cao, Chin-Teng Lin, Weiping Ding, Mu-Hong Chen, Cheng-Ta Li, Tung-Ping Su

Abstract: This study explores the responses to ketamine in patients with treatment-resistant depression (TRD) using a wearable forehead electroencephalography (EEG) device. We recruited fifty-five outpatients with TRD who were randomised into three approximately equal-sized groups (A: 0.5 mg/kg ketamine; B: 0.2 mg/kg ketamine; and C: normal saline) under double-blind conditions. The ketamine responses were… ▽ More This study explores the responses to ketamine in patients with treatment-resistant depression (TRD) using a wearable forehead electroencephalography (EEG) device. We recruited fifty-five outpatients with TRD who were randomised into three approximately equal-sized groups (A: 0.5 mg/kg ketamine; B: 0.2 mg/kg ketamine; and C: normal saline) under double-blind conditions. The ketamine responses were measured by EEG signals and Hamilton Depression Rating Scale (HDRS) scores. At baseline, responders showed a significantly weaker EEG theta power than did non- responders (p < 0.05). Responders exhibited a higher EEG alpha power but lower EEG alpha asymmetry and theta cordance at post-treatment than at baseline (p < 0.05). Furthermore, our baseline EEG predictor classified responders and non-responders with 81.3 +- 9.5% accuracy, 82.1 +- 8.6% sensitivity and 91.9 +- 7.4% specificity. In conclusion, the rapid antidepressant effects of mixed doses of ketamine are associated with prefrontal EEG power, asymmetry and cordance at baseline and early post-treatment changes. The prefrontal EEG patterns at baseline may account for recognising ketamine effects in advance. Our randomised, double- blind, placebo-controlled study provides information regarding clinical impacts on the potential targets underlying baseline identification and early changes from the effects of ketamine in patients with TRD. △ Less

Submitted 18 September, 2018; v1 submitted 29 May, 2018; originally announced May 2018.

Comments: This revised article is submitting to IEEE TBME

Journal ref: IEEE Transactions on Biomedical Engineering (Page(s): 1668 - 1679, Volume: 66 , Issue: 6 , June 2019 )

An Empirical Assessment of Security Risks of Global Android Banking Apps

Authors: Sen Chen, Lingling Fan, Guozhu Meng, Ting Su, Minhui Xue, Yinxing Xue, Yang Liu, Lihua Xu

Abstract: Mobile banking apps, belonging to the most security-critical app category, render massive and dynamic transactions susceptible to security risks. Given huge potential financial loss caused by vulnerabilities, existing research lacks a comprehensive empirical study on the security risks of global banking apps to provide useful insights and improve the security of banking apps. Since data-related… ▽ More Mobile banking apps, belonging to the most security-critical app category, render massive and dynamic transactions susceptible to security risks. Given huge potential financial loss caused by vulnerabilities, existing research lacks a comprehensive empirical study on the security risks of global banking apps to provide useful insights and improve the security of banking apps. Since data-related weaknesses in banking apps are critical and may directly cause serious financial loss, this paper first revisits the state-of-the-art available tools and finds that they have limited capability in identifying data-related security weaknesses of banking apps. To complement the capability of existing tools in data-related weakness detection, we propose a three-phase automated security risk assessment system, named AUSERA, which leverages static program analysis techniques and sensitive keyword identification. By leveraging AUSERA, we collect 2,157 weaknesses in 693 real-world banking apps across 83 countries, which we use as a basis to conduct a comprehensive empirical study from different aspects, such as global distribution and weakness evolution during version updates. We find that apps owned by subsidiary banks are always less secure than or equivalent to those owned by parent banks. In addition, we also track the patching of weaknesses and receive much positive feedback from banking entities so as to improve the security of banking apps in practice. To date, we highlight that 21 banks have confirmed the weaknesses we reported. We also exchange insights with 7 banks, such as HSBC in UK and OCBC in Singapore, via in-person or online meetings to help them improve their apps. We hope that the insights developed in this paper will inform the communities about the gaps among multiple stakeholders, including banks, academic researchers, and third-party security companies. △ Less

Submitted 18 February, 2020; v1 submitted 14 May, 2018; originally announced May 2018.

Experimental Signatures of Spin Superfluid Ground State in Canted Antiferromagnet Cr2O3 via Nonlocal Spin Transport

Authors: Wei Yuan, Qiong Zhu, Tang Su, Yunyan Yao, Wenyu Xing, Yangyang Chen, Yang Ma, Xi Lin, Jing Shi, Ryuichi Shindou, X. C. Xie, Wei Han

Abstract: Spin superfluid is a novel emerging quantum matter arising from the Bose-Einstein condensate (BEC) of spin-1 bosons. We demonstrate the spin superfluid ground state in canted antiferromagnetic Cr2O3 thin film at low temperatures via nonlocal spin transport. A large enhancement of the nonlocal spin signal is observed below ~ 20 K, and it saturates from ~ 5 K down to 2 K. We show that the spins can… ▽ More Spin superfluid is a novel emerging quantum matter arising from the Bose-Einstein condensate (BEC) of spin-1 bosons. We demonstrate the spin superfluid ground state in canted antiferromagnetic Cr2O3 thin film at low temperatures via nonlocal spin transport. A large enhancement of the nonlocal spin signal is observed below ~ 20 K, and it saturates from ~ 5 K down to 2 K. We show that the spins can propagate over very long distances (~ 20 micro meters) in such spin superfluid ground state and the nonlocal spin signal decreases very slowly as the spacing increases with an inverse relationship, which is consistent with theoretical prediction. Furthermore, spin superfluidity has been investigated in the canted antiferromagnetic phase of the (11-20)-oriented Cr2O3 film, where the magnetic field dependence of the associated critical temperature follows a two-thirds power law near the critical point. The experimental demonstration of the spin superfluid ground state in canted antiferromagnet will be extremely important for the fundamental physics on the BEC of spin-1 bosons and paves the way for future spin supercurrent devices, such as spin-Josephson junctions. △ Less

Submitted 21 April, 2018; originally announced April 2018.

Comments: Main text 8 pages, 4 figures, Supplementary Materials 5 pages, 15 SI figures

Journal ref: Science Advances 4, eaat1098 (2018)

Adaptive Group Shuffled Decoding for LDPC Codes

Authors: Tofar C. -Y. Chang, Yu T. Su

Abstract: We propose new grouping methods for group shuffled (GS) decoding of both regular and irregular low-density parity check cods. These methods are independent of the check-to-variable message formula used. Integer-valued metrics for measuring the reliability of each tentative variable node (VN) decision and the associated likelihood of being corrected are developed. The metrics are used to determine… ▽ More We propose new grouping methods for group shuffled (GS) decoding of both regular and irregular low-density parity check cods. These methods are independent of the check-to-variable message formula used. Integer-valued metrics for measuring the reliability of each tentative variable node (VN) decision and the associated likelihood of being corrected are developed. The metrics are used to determine the VN updating priority so the grouping may vary in each iteration. We estimate the computation complexity needed to adaptively regroup VNs. Numerical results show that our GS algorithms improve the performance of some existing GS belief-propagation decoders. △ Less

Submitted 1 April, 2018; originally announced April 2018.

Towards Efficient Data-flow Test Data Generation

Authors: Ting Su, Chengyu Zhang, Yichen Yan, Lingling Fan, Geguang Pu, Yang Liu, Zhoulai Fu, Zhendong Su

Abstract: Data-flow testing (DFT) aims to detect potential data interaction anomalies by focusing on the points at which variables receive values and the points at which these values are used. Such test objectives are referred as \emph{def-use pairs}. However, the complexity of DFT still overwhelms the testers in practice. To tackle this problem, we introduce a hybrid testing framework for data-flow based t… ▽ More Data-flow testing (DFT) aims to detect potential data interaction anomalies by focusing on the points at which variables receive values and the points at which these values are used. Such test objectives are referred as \emph{def-use pairs}. However, the complexity of DFT still overwhelms the testers in practice. To tackle this problem, we introduce a hybrid testing framework for data-flow based test generation: (1) The core of our framework is symbolic execution (SE), enhanced by a novel guided path exploration strategy to improve testing performance; and (2) we systematically cast DFT as reachability checking in software model checking (SMC) to complement SE, yielding practical DFT that combines the two techniques' strengths. We implemented our framework for C programs on top of the state-of-the-art symbolic execution engine KLEE and instantiated with three different software model checkers. Our evaluation on the 28,354 def-use pairs collected from 33 open-source and industrial program subjects shows (1) our SE-based approach can improve DFT performance by 15$\sim$48% in terms of testing time, compared with existing search strategies; and (2) our combined approach can further reduce testing time by 20.1$\sim$93.6%, and improve data-flow coverage by 27.8$\sim$45.2% by eliminating infeasible test objectives. Compared with the SMC-based approach alone, our combined approach can also reduce testing time by 19.9$\sim$23.8%, and improve data-flow coverage by 7$\sim$10%. This combined approach also enables the cross-checking of each component for reliable and robust testing results. We have made our testing framework and benchmarks publicly available to facilitate future research. △ Less

Submitted 30 March, 2019; v1 submitted 28 March, 2018; originally announced March 2018.

DeepGauge: Multi-Granularity Testing Criteria for Deep Learning Systems

Authors: Lei Ma, Felix Juefei-Xu, Fuyuan Zhang, Jiyuan Sun, Minhui Xue, Bo Li, Chunyang Chen, Ting Su, Li Li, Yang Liu, Jianjun Zhao, Yadong Wang

Abstract: Deep learning (DL) defines a new data-driven programming paradigm that constructs the internal system logic of a crafted neuron network through a set of training data. We have seen wide adoption of DL in many safety-critical scenarios. However, a plethora of studies have shown that the state-of-the-art DL systems suffer from various vulnerabilities which can lead to severe consequences when applie… ▽ More Deep learning (DL) defines a new data-driven programming paradigm that constructs the internal system logic of a crafted neuron network through a set of training data. We have seen wide adoption of DL in many safety-critical scenarios. However, a plethora of studies have shown that the state-of-the-art DL systems suffer from various vulnerabilities which can lead to severe consequences when applied to real-world applications. Currently, the testing adequacy of a DL system is usually measured by the accuracy of test data. Considering the limitation of accessible high quality test data, good accuracy performance on test data can hardly provide confidence to the testing adequacy and generality of DL systems. Unlike traditional software systems that have clear and controllable logic and functionality, the lack of interpretability in a DL system makes system analysis and defect detection difficult, which could potentially hinder its real-world deployment. In this paper, we propose DeepGauge, a set of multi-granularity testing criteria for DL systems, which aims at rendering a multi-faceted portrayal of the testbed. The in-depth evaluation of our proposed testing criteria is demonstrated on two well-known datasets, five DL systems, and with four state-of-the-art adversarial attack techniques against DL. The potential usefulness of DeepGauge sheds light on the construction of more generic and robust DL systems. △ Less

Submitted 14 August, 2018; v1 submitted 20 March, 2018; originally announced March 2018.

Comments: The 33rd IEEE/ACM International Conference on Automated Software Engineering (ASE 2018)

Journal ref: DeepGauge: Multi-Granularity Testing Criteria for Deep Learning Systems. In Proceedings of the 33rd ACM/IEEE International Conference on Automated Software Engineering (ASE 18), September 3-7, 2018, Montpellier, France

Presentation Proposal: Towards Efficient Data-flow Test Data Generation Using KLEE

Authors: Chengyu Zhang, Ting Su, Yichen Yan, Ke Wu, Geguang Pu

Abstract: Dataflow coverage, one of the white-box testing criteria, focuses on the relations between variable definitions and their uses.Several empirical studies have proved data-flow testing is more effective than control-flow testing. However, data-flow testing still cannot find its adoption in practice, due to the lack of effective tool support. To this end, we propose a guided symbolic execution approa… ▽ More Dataflow coverage, one of the white-box testing criteria, focuses on the relations between variable definitions and their uses.Several empirical studies have proved data-flow testing is more effective than control-flow testing. However, data-flow testing still cannot find its adoption in practice, due to the lack of effective tool support. To this end, we propose a guided symbolic execution approach to efficiently search for program paths to satisfy data-flow coverage criteria. We implemented this approach on KLEE and evaluated with 30 program subjects which are constructed by the subjects used in previous data-flow testing literature, SIR, SV-COMP benchmarks. Moreover, we are planning to integrate the data-flow testing technique into the new proposed symbolic execution engine, SmartUnit, which is a cloud-based unit testing service for industrial software, supporting coverage-based testing. It has successfully helped several well-known corporations and institutions in China to adopt coverage-based testing in practice, totally tested more than one million lines of real code from industry. △ Less

Submitted 19 March, 2019; v1 submitted 17 March, 2018; originally announced March 2018.

Low-Rank Solution Methods for Stochastic Eigenvalue Problems

Authors: Howard C. Elman, Tengfei Su

Abstract: We study efficient solution methods for stochastic eigenvalue problems arising from discretization of self-adjoint partial differential equations with random data. With the stochastic Galerkin approach, the solutions are represented as generalized polynomial chaos expansions. A low-rank variant of the inverse subspace iteration algorithm is presented for computing one or several minimal eigenvalue… ▽ More We study efficient solution methods for stochastic eigenvalue problems arising from discretization of self-adjoint partial differential equations with random data. With the stochastic Galerkin approach, the solutions are represented as generalized polynomial chaos expansions. A low-rank variant of the inverse subspace iteration algorithm is presented for computing one or several minimal eigenvalues and corresponding eigenvectors of parameter-dependent matrices. In the algorithm, the iterates are approximated by low-rank matrices, which leads to significant cost savings. The algorithm is tested on two benchmark problems, a stochastic diffusion problem with some poorly separated eigenvalues, and an operator derived from a discrete stochastic Stokes problem whose minimal eigenvalue is related to the inf-sup stability constant. Numerical experiments show that the low-rank algorithm produces accurate solutions compared to the Monte Carlo method, and it uses much less computational time than the original algorithm without low-rank approximation. △ Less

Submitted 9 March, 2018; originally announced March 2018.

Role of La doping for Topological Hall Effect in Epitaxial EuO Films

Authors: Yu Yun, Yang Ma, Tang Su, Wenyu Xing, Yangyang Chen, Yunyan Yao, Ranran Cai, Wei Yuan, Wei Han

Abstract: We report the critical role of La doping in the topological Hall effect observed in LaxEu1-xO thin films (~ 50 nm) grown by molecular beam epitaxy. When the La doping exceeds 0.036, topological Hall effect emerges, which we attribute to the formation of magnetic skyrmions. Besides, the La doping is found to play a critical role in determining the phases, densities, and sizes of the skyrmions in th… ▽ More We report the critical role of La doping in the topological Hall effect observed in LaxEu1-xO thin films (~ 50 nm) grown by molecular beam epitaxy. When the La doping exceeds 0.036, topological Hall effect emerges, which we attribute to the formation of magnetic skyrmions. Besides, the La doping is found to play a critical role in determining the phases, densities, and sizes of the skyrmions in the LaxEu1-xO thin films. The maximum region of the skyrmion phase diagram is observed on the La0.1Eu0.9O thin film. As the La doping increases, the skyrmion density increases while the skyrmion size decreases. Our findings demonstrate the important role of La doping for the skyrmions in EuO films, which could be important for future studies of magnetic skyrmions in Heisenberg ferromagnets. △ Less

Submitted 7 March, 2018; originally announced March 2018.

Comments: 11 pages, 5 figures, To appear in Physics Review Materials

Journal ref: Phys. Rev. Materials 2, 034201 (2018)

First Measurement of the Ti$(e,e^\prime){\rm X}$ Cross Section at Jefferson Lab

Authors: H. Dai, M. Murphy, V. Pandey, D. Abrams, D. Nguyen, B. Aljawrneh, S. Alsalmi, A. M. Ankowski, J. Bane, S. Barcus, O. Benhar, V. Bellini, J. Bericic, D. Biswas, A. Camsonne, J. Castellanos, J. -P. Chen, M. E. Christy, K. Craycraft, R. Cruz-Torres, D. Day, S. -C. Dusa, E. Fuchey, T. Gautam, C. Giusti , et al. (32 additional authors not shown)

Abstract: To probe CP violation in the leptonic sector using GeV energy neutrino beams in current and future experiments using argon detectors, precise models of the complex underlying neutrino and antineutrino interactions are needed. The E12-14-012 experiment at Jefferson Lab Hall A was designed to perform a combined analysis of inclusive and exclusive electron scatterings on both argon ($N = 22$) and tit… ▽ More To probe CP violation in the leptonic sector using GeV energy neutrino beams in current and future experiments using argon detectors, precise models of the complex underlying neutrino and antineutrino interactions are needed. The E12-14-012 experiment at Jefferson Lab Hall A was designed to perform a combined analysis of inclusive and exclusive electron scatterings on both argon ($N = 22$) and titanium ($Z = 22$) nuclei using GeV energy electron beams. The measurement on titanium nucleus provides essential information to understand the neutrino scattering on argon, large contribution to which comes from scattering off neutrons. Here we report the first experimental study of electron-titanium scattering as double differential cross section at beam energy $E=2.222$ GeV and electron scattering angle $θ= 15.541$ deg, measured over a broad range of energy transfer, spanning the kinematical regions in which quasielastic scattering and delta production are the dominant reaction mechanisms. The data provide valuable new information needed to develop accurate theoretical models of the electromagnetic and weak cross sections of these complex nuclei in the kinematic regime of interest to neutrino experiments. △ Less

Submitted 26 July, 2018; v1 submitted 5 March, 2018; originally announced March 2018.

Comments: 6 pages, 5 figures. Version published in Physical Review C

Journal ref: Phys. Rev. C 98, 014617 (2018)

SmartUnit: Empirical Evaluations for Automated Unit Testing of Embedded Software in Industry

Authors: Chengyu Zhang, Yichen Yan, Hanru Zhou, Yinbo Yao, Ke Wu, Ting Su, Weikai Miao, Geguang Pu

Abstract: In this paper, we aim at the automated unit coverage-based testing for embedded software. To achieve the goal, by analyzing the industrial requirements and our previous work on automated unit testing tool CAUT, we rebuild a new tool, SmartUnit, to solve the engineering requirements that take place in our partner companies. SmartUnit is a dynamic symbolic execution implementation, which supports st… ▽ More In this paper, we aim at the automated unit coverage-based testing for embedded software. To achieve the goal, by analyzing the industrial requirements and our previous work on automated unit testing tool CAUT, we rebuild a new tool, SmartUnit, to solve the engineering requirements that take place in our partner companies. SmartUnit is a dynamic symbolic execution implementation, which supports statement, branch, boundary value and MC/DC coverage. SmartUnit has been used to test more than one million lines of code in real projects. For confidentiality motives, we select three in-house real projects for the empirical evaluations. We also carry out our evaluations on two open source database projects, SQLite and PostgreSQL, to test the scalability of our tool since the scale of the embedded software project is mostly not large, 5K-50K lines of code on average. From our experimental results, in general, more than 90% of functions in commercial embedded software achieve 100% statement, branch, MC/DC coverage, more than 80% of functions in SQLite achieve 100% MC/DC coverage, and more than 60% of functions in PostgreSQL achieve 100% MC/DC coverage. Moreover, SmartUnit is able to find the runtime exceptions at the unit testing level. We also have reported exceptions like array index out of bounds and divided-by-zero in SQLite. Furthermore, we analyze the reasons of low coverage in automated unit testing in our setting and give a survey on the situation of manual unit testing with respect to automated unit testing in industry. △ Less

Submitted 17 June, 2018; v1 submitted 23 February, 2018; originally announced February 2018.

Comments: In Proceedings of 40th International Conference on Software Engineering: Software Engineering in Practice Track, Gothenburg, Sweden, May 27-June 3, 2018 (ICSE-SEIP '18), 10 pages

Large-Scale Analysis of Framework-Specific Exceptions in Android Apps

Authors: Lingling Fan, Ting Su, Sen Chen, Guozhu Meng, Yang Liu, Lihua Xu, Geguang Pu, Zhendong Su

Abstract: Mobile apps have become ubiquitous. For app developers, it is a key priority to ensure their apps' correctness and reliability. However, many apps still suffer from occasional to frequent crashes, weakening their competitive edge. Large-scale, deep analyses of the characteristics of real-world app crashes can provide useful insights to guide developers, or help improve testing and analysis tools.… ▽ More Mobile apps have become ubiquitous. For app developers, it is a key priority to ensure their apps' correctness and reliability. However, many apps still suffer from occasional to frequent crashes, weakening their competitive edge. Large-scale, deep analyses of the characteristics of real-world app crashes can provide useful insights to guide developers, or help improve testing and analysis tools. However, such studies do not exist -- this paper fills this gap. Over a four-month long effort, we have collected 16,245 unique exception traces from 2,486 open-source Android apps, and observed that framework-specific exceptions account for the majority of these crashes. We then extensively investigated the 8,243 framework-specific exceptions (which took six person-months): (1) identifying their characteristics (e.g., manifestation locations, common fault categories), (2) evaluating their manifestation via state-of-the-art bug detection techniques, and (3) reviewing their fixes. Besides the insights they provide, these findings motivate and enable follow-up research on mobile apps, such as bug detection, fault localization and patch generation. In addition, to demonstrate the utility of our findings, we have optimized Stoat, a dynamic testing tool, and implemented ExLocator, an exception localization tool, for Android apps. Stoat is able to quickly uncover three previously-unknown, confirmed/fixed crashes in Gmail and Google+; ExLocator is capable of precisely locating the root causes of identified exceptions in real-world apps. Our substantial dataset is made publicly available to share with and benefit the community. △ Less

Submitted 10 March, 2018; v1 submitted 22 January, 2018; originally announced January 2018.

Comments: ICSE'18: the 40th International Conference on Software Engineering

The Role of Oxygen in Ionic Liquid Gating on 2D Cr2Ge2Te6: a Non-Oxide Material

Authors: Yangyang Chen, Wenyu Xing, Xirui Wang, Bowen Shen, Wei Yuan, Tang Su, Yang Ma, Yunyan Yao, Jiangnan Zhong, Yu Yun, X. C. Xie, Shuang Jia, Wei Han

Abstract: Ionic liquid gating can markedly modulate the materials' carrier density so as to induce metallization, superconductivity, and quantum phase transitions. One of the main issues is whether the mechanism of ionic liquid gating is an electrostatic field effect or an electrochemical effect, especially for oxide materials. Recent observation of the suppression of the ionic liquid gate-induced metalliza… ▽ More Ionic liquid gating can markedly modulate the materials' carrier density so as to induce metallization, superconductivity, and quantum phase transitions. One of the main issues is whether the mechanism of ionic liquid gating is an electrostatic field effect or an electrochemical effect, especially for oxide materials. Recent observation of the suppression of the ionic liquid gate-induced metallization in the presence of oxygen for oxide materials suggests the electrochemical effect. However, in more general scenarios, the role of oxygen in ionic liquid gating effect is still unclear. Here, we perform the ionic liquid gating experiments on a non-oxide material: two-dimensional ferromagnetic Cr2Ge2Te6. Our results demonstrate that despite the large increase of the gate leakage current in the presence of oxygen, the oxygen does not affect the ionic liquid gating effect (< 5 % difference), which suggests the electrostatic field effect as the mechanism on non-oxide materials. Moreover, our results show that the ionic liquid gating is more effective on the modulation of the channel resistances compared to the back gating across the 300 nm thick SiO2. △ Less

Submitted 21 December, 2017; originally announced December 2017.

Comments: 17 pages, 6 figure. To appear in ACS Applied Materials & Interfaces

Journal ref: ACS Appl. Mater. Interfaces, 2018, 10 (1), pp 1383-1388

Observation of long phase-coherence length in epitaxial La-doped CdO thin films

Authors: Yu Yun, Yang Ma, Songsheng Tao, Wenyu Xing, Yangyang Chen, Tang Su, Wei Yuan, Jian Wei, Xi Lin, Qian Niu, X. C. Xie, Wei Han

Abstract: The search for long electron phase coherence length, which is the length that an electron can keep its quantum wave-like properties, has attracted considerable interest in the last several decades. Here, we report the long phase coherence length of ~ 3.7 micro meters in La-doped CdO thin films at 2 K. Systematical investigations of the La doping and the temperature dependences of the electron mobi… ▽ More The search for long electron phase coherence length, which is the length that an electron can keep its quantum wave-like properties, has attracted considerable interest in the last several decades. Here, we report the long phase coherence length of ~ 3.7 micro meters in La-doped CdO thin films at 2 K. Systematical investigations of the La doping and the temperature dependences of the electron mobility and the electron phase coherence length reveal contrasting scattering mechanisms for these two physical properties. Furthermore, these results show that the oxygen vacancies could be the dominant scatters in CdO thin films that break the electron phase coherence, which would shed light on further investigation of phase coherence properties in oxide materials. △ Less

Submitted 21 December, 2017; originally announced December 2017.

Comments: 13 pages, 6 figure. SI: 8 pages. To appear in Phys. Rev. B

Journal ref: Physical Review B 96, 245310 (2017)

AndroVault: Constructing Knowledge Graph from Millions of Android Apps for Automated Analysis

Authors: Guozhu Meng, Yinxing Xue, Jing Kai Siow, Ting Su, Annamalai Narayanan, Yang Liu

Abstract: Data driven research on Android has gained a great momentum these years. The abundance of data facilitates knowledge learning, however, also increases the difficulty of data preprocessing. Therefore, it is non-trivial to prepare a demanding and accurate set of data for research. In this work, we put forward AndroVault, a framework for the Android research composing of data collection, knowledge re… ▽ More Data driven research on Android has gained a great momentum these years. The abundance of data facilitates knowledge learning, however, also increases the difficulty of data preprocessing. Therefore, it is non-trivial to prepare a demanding and accurate set of data for research. In this work, we put forward AndroVault, a framework for the Android research composing of data collection, knowledge representation and knowledge extraction. It has started with a long-running web crawler for data collection (both apps and description) since 2013, which guarantees the timeliness of data; With static analysis and dynamic analysis of the collected data, we compute a variety of attributes to characterize Android apps. After that, we employ a knowledge graph to connect all these apps by computing their correlation in terms of attributes; Last, we leverage multiple technologies such as logical inference, machine learning, and correlation analysis to extract facts (more accurate and demanding, either high level or not, data) that are beneficial for a specific research problem. With the produced data of high quality, we have successfully conducted many research works including malware detection, code generation, and Android testing. We would like to release our data to the research community in an authenticated manner, and encourage them to conduct productive research. △ Less

Submitted 21 November, 2017; v1 submitted 20 November, 2017; originally announced November 2017.

Generative Steganography with Kerckhoffs' Principle

Authors: Yan Ke, Minqing Zhang, Jia Liu, Tingting Su, Xiaoyuan Yang

Abstract: The distortion in steganography that usually comes from the modification or recoding on the cover image during the embedding process leaves the steganalyzer with possibility of discriminating. Faced with such a risk, we propose generative steganography with Kerckhoffs' principle (GSK) in this letter. In GSK, the secret messages are generated by a cover image using a generator rather than embedded… ▽ More The distortion in steganography that usually comes from the modification or recoding on the cover image during the embedding process leaves the steganalyzer with possibility of discriminating. Faced with such a risk, we propose generative steganography with Kerckhoffs' principle (GSK) in this letter. In GSK, the secret messages are generated by a cover image using a generator rather than embedded into the cover, thus resulting in no modifications in the cover. To ensure the security, the generators are trained to meet Kerckhoffs' principle based on generative adversarial networks (GAN). Everything about the GSK system, except the extraction key, is public knowledge for the receivers. The secret messages can be outputted by the generator if and only if the extraction key and the cover image are both inputted. In the generator training procedures, there are two GANs, Message- GAN and Cover-GAN, designed to work jointly making the generated results under the control of the extraction key and the cover image. We provide experimental results on the training process and give an example of the working process by adopting a generator trained on MNIST, which demonstrate that GSK can use a cover image without any modification to generate messages, and without the extraction key or the cover image, only meaningless results would be obtained. △ Less

Submitted 4 July, 2021; v1 submitted 13 November, 2017; originally announced November 2017.

Learning Chinese Word Representations From Glyphs Of Characters

Authors: Tzu-Ray Su, Hung-Yi Lee

Abstract: In this paper, we propose new methods to learn Chinese word representations. Chinese characters are composed of graphical components, which carry rich semantics. It is common for a Chinese learner to comprehend the meaning of a word from these graphical components. As a result, we propose models that enhance word representations by character glyphs. The character glyph features are directly learne… ▽ More In this paper, we propose new methods to learn Chinese word representations. Chinese characters are composed of graphical components, which carry rich semantics. It is common for a Chinese learner to comprehend the meaning of a word from these graphical components. As a result, we propose models that enhance word representations by character glyphs. The character glyph features are directly learned from the bitmaps of characters by convolutional auto-encoder(convAE), and the glyph features improve Chinese word representations which are already enhanced by character embeddings. Another contribution in this paper is that we created several evaluation datasets in traditional Chinese and made them public. △ Less

Submitted 15 August, 2017; originally announced August 2017.

Ruling polynomials and augmentations for Legendrian tangles

Authors: Tao Su

Abstract: Associated to Legendrian links in the standard contact three-space, Ruling polynomials are Legendrian isotopy invariants, which also compute augmentation numbers, that is, the points-counting of augmentation varieties for Legendrian links (up to a normalized factor) \cite{HR15}. In this article, we generalize this picture to Legendrian tangles, which are morally the pieces obtained by cutting Lege… ▽ More Associated to Legendrian links in the standard contact three-space, Ruling polynomials are Legendrian isotopy invariants, which also compute augmentation numbers, that is, the points-counting of augmentation varieties for Legendrian links (up to a normalized factor) \cite{HR15}. In this article, we generalize this picture to Legendrian tangles, which are morally the pieces obtained by cutting Legendrian link fronts along 2 vertical lines. Moreover, we show that the Ruling polynomials for Legendrian tangles satisfy the composition axiom. In the special case of Legendrian knots, our arguments provide new proofs to the main results in \cite{HR15}. In the end, we also introduce generalized Ruling polynomials for Legendrian tangles, to account for non-acyclic augmentations in the "Ruling polynomials compute augmentation numbers" picture. △ Less

Submitted 16 July, 2017; originally announced July 2017.

Comments: 56 pages, 17 figures

MSC Class: 57R17 (Primary) 57M25; 53D42 (Secondary)

Electric Field Effect in Multilayer Cr2Ge2Te6: a Ferromagnetic Two-Dimensional Material

Authors: Wenyu Xing, Yangyang Chen, Patrick M. Odenthal, Xiao Zhang, Wei Yuan, Tang Su, Qi Song, Tianyu Wang, Jiangnan Zhong, Shuang Jia, X. C. Xie, Yan Li, Wei Han

Abstract: The emergence of two-dimensional (2D) materials has attracted a great deal of attention due to their fascinating physical properties and potential applications for future nanoelectronic devices. Since the first isolation of graphene, a Dirac material, a large family of new functional 2D materials have been discovered and characterized, including insulating 2D boron nitride, semiconducting 2D trans… ▽ More The emergence of two-dimensional (2D) materials has attracted a great deal of attention due to their fascinating physical properties and potential applications for future nanoelectronic devices. Since the first isolation of graphene, a Dirac material, a large family of new functional 2D materials have been discovered and characterized, including insulating 2D boron nitride, semiconducting 2D transition metal dichalcogenides and black phosphorus, and superconducting 2D bismuth strontium calcium copper oxide, molybdenum disulphide and niobium selenide, etc. Here, we report the identification of ferromagnetic thin flakes of Cr2Ge2Te6 (CGT) with thickness down to a few nanometers, which provides a very important piece to the van der Waals structures consisting of various 2D materials. We further demonstrate the giant modulation of the channel resistance of 2D CGT devices via electric field effect. Our results illustrate the gate voltage tunability of 2D CGT and the potential of CGT, a ferromagnetic 2D material, as a new functional quantum material for applications in future nanoelectronics and spintronics. △ Less

Submitted 28 April, 2017; originally announced April 2017.

Comments: To appear in 2D Materials

Journal ref: 2D Mater. 4, 024009 (2017)

HPTT: A High-Performance Tensor Transposition C++ Library

Authors: Paul Springer, Tong Su, Paolo Bientinesi

Abstract: Recently we presented TTC, a domain-specific compiler for tensor transpositions. Despite the fact that the performance of the generated code is nearly optimal, due to its offline nature, TTC cannot be utilized in all the application codes in which the tensor sizes and the necessary tensor permutations are determined at runtime. To overcome this limitation, we introduce the open-source C++ library… ▽ More Recently we presented TTC, a domain-specific compiler for tensor transpositions. Despite the fact that the performance of the generated code is nearly optimal, due to its offline nature, TTC cannot be utilized in all the application codes in which the tensor sizes and the necessary tensor permutations are determined at runtime. To overcome this limitation, we introduce the open-source C++ library High-Performance Tensor Transposition (HPTT). Similar to TTC, HPTT incorporates optimizations such as blocking, multi-threading, and explicit vectorization; furthermore it decomposes any transposition into multiple loops around a so called micro-kernel. This modular design---inspired by BLIS---makes HPTT easy to port to different architectures, by only replacing the hand-vectorized micro-kernel (e.g., a 4x4 transpose). HPTT also offers an optional autotuning framework---guided by a performance model---that explores a vast search space of implementations at runtime (similar to FFTW). Across a wide range of different tensor transpositions and architectures (e.g., Intel Ivy Bridge, Intel Knights Landing, ARMv7, IBM Power7), HPTT attains a bandwidth comparable to that of SAXPY, and yields remarkable speedups over Eigen's tensor transposition implementation. Most importantly, the integration of HPTT into the Cyclops Tensor Framework (CTF) improves the overall performance of tensor contractions by up to 3.1x. △ Less

Submitted 10 May, 2017; v1 submitted 14 April, 2017; originally announced April 2017.

ACM Class: G.4; D.1.3

A Low-Rank Multigrid Method for the Stochastic Steady-State Diffusion Problem

Authors: Howard C. Elman, Tengfei Su

Abstract: We study a multigrid method for solving large linear systems of equations with tensor product structure. Such systems are obtained from stochastic finite element discretization of stochastic partial differential equations such as the steady-state diffusion problem with random coefficients. When the variance in the problem is not too large, the solution can be well approximated by a low-rank object… ▽ More We study a multigrid method for solving large linear systems of equations with tensor product structure. Such systems are obtained from stochastic finite element discretization of stochastic partial differential equations such as the steady-state diffusion problem with random coefficients. When the variance in the problem is not too large, the solution can be well approximated by a low-rank object. In the proposed multigrid algorithm, the matrix iterates are truncated to low rank to reduce memory requirements and computational effort. The method is proved convergent with an analytic error bound. Numerical experiments show its effectiveness in solving the Galerkin systems compared to the original multigrid solver, especially when the number of degrees of freedom associated with the spatial discretization is large. △ Less

Submitted 8 April, 2017; v1 submitted 16 December, 2016; originally announced December 2016.

MSC Class: 35R60; 60H15; 60H35; 65F10; 65N30; 65N55

On estimating the force-freeness based on observed magnetograms

Authors: X. M. Zhang, M. Zhang, J. T. Su

Abstract: It is a common practice in the solar physics community to test whether or not measured photospheric or chromospheric vector magnetograms are force-free, using the Maxwell stress as a measure. Some previous studies have suggested that magnetic fields of active regions in the solar chromosphere are close to be force-free whereas there is no consistency among previous studies on whether magnetic fiel… ▽ More It is a common practice in the solar physics community to test whether or not measured photospheric or chromospheric vector magnetograms are force-free, using the Maxwell stress as a measure. Some previous studies have suggested that magnetic fields of active regions in the solar chromosphere are close to be force-free whereas there is no consistency among previous studies on whether magnetic fields of active regions in the solar photosphere are force-free or not. Here we use three kinds of representative magnetic fields (analytical force-free solutions, modeled solar-like force-free fields and observed non-force-free fields) to discuss on how the measurement issues such as limited field of view, instrument sensitivity and measurement error could affect the estimation of force-freeness based on observed magnetograms. Unlike previous studies that focus on discussing the effect of limited field of view or instrument sensitivity, our calculation shows that just measurement error alone can significantly influence the results of force-freeness estimate, due to the fact that measurement errors in horizontal magnetic fields are usually ten times larger than that of the vertical fields. This property of measurement errors, interacting with the particular form of force-freeness estimate formula, would result in wrong judgments of the force-freeness: a truly force-free field may be mistakenly estimated as being non-force-free and a true non-force-free field may be estimated as being force-free. Our analysis calls for caution when interpreting the force-freeness estimates based on measured magnetograms, and also suggests that the true photospheric magnetic field may be further away from being force-free than they currently appear to be. △ Less

Submitted 10 November, 2016; originally announced November 2016.

Comments: accepted for publication in ApJ

Overcrowding drives the unjamming transition of gap-free monolayers

Authors: Tao Su, Ganhui Lan

Abstract: Collective cell motility plays central roles in various biological phenomena such as inflammatory response, wound healing, cancer metastasis and embryogenesis. These are biological demonstrations of the unjamming transition. However, contradictory to the typical density-driven jamming processes in particulate assemblies, cellular systems often get unjammed in highly packed, sometimes overcrowding… ▽ More Collective cell motility plays central roles in various biological phenomena such as inflammatory response, wound healing, cancer metastasis and embryogenesis. These are biological demonstrations of the unjamming transition. However, contradictory to the typical density-driven jamming processes in particulate assemblies, cellular systems often get unjammed in highly packed, sometimes overcrowding tissue environments. In this work, we report that overcrowding can unjam gap-free monolayers through increasing isotropic compression. The transition boundary is determined by the isotropic compression and the cell-cell adhesion. We explicitly construct the free energy landscape for the T1 topological transition during monolayer rearrangement, and find that it evolves from single-barrier shape to double-barrier shape upon completion of the unjamming process. Our analyses reveal that the overcrowding and adhesion induced unjamming transition reflects the mechanical yielding of the highly deformable monolayer, which differs from those caused by loosing up a packed particulate assembly. △ Less

Submitted 13 October, 2016; originally announced October 2016.

Comments: 29 pages, 7 figures, submitted

Spin Injection and Inverse Edelstein Effect in the Surface States of Topological Kondo Insulator SmB6

Authors: Qi Song, Jian Mi, Dan Zhao, Tang Su, Wei Yuan, Wenyu Xing, Yangyang Chen, Tianyu Wang, Tao Wu, Xian Hui Chen, X. C. Xie, Chi Zhang, Jing Shi, Wei Han

Abstract: There has been considerable interest in exploiting the spin degrees of freedom of electrons for potential information storage and computing technologies. Topological insulators (TI), a class of quantum materials, have special gapless edge/surface states, where the spin polarization of the Dirac fermions is locked to the momentum direction. This spin-momentum locking property gives rise to very int… ▽ More There has been considerable interest in exploiting the spin degrees of freedom of electrons for potential information storage and computing technologies. Topological insulators (TI), a class of quantum materials, have special gapless edge/surface states, where the spin polarization of the Dirac fermions is locked to the momentum direction. This spin-momentum locking property gives rise to very interesting spin-dependent physical phenomena such as the Edelstein and inverse Edelstein effects. However, the spin injection in pure surface states of TI is very challenging because of the coexistence of the highly conducting bulk states. Here, we experimentally demonstrate the spin injection and observe the inverse Edelstein effect in the surface states of a topological Kondo insulator, SmB6. At low temperatures when only surface carriers are present, a clear spin signal is observed. Furthermore, the magnetic field angle dependence of the spin signal is consistent with spin-momentum locking property of surface states of SmB6. △ Less

Submitted 4 October, 2016; originally announced October 2016.

Comments: 15 pages, 5 figures, Accepted to Nature Communications (In Press)

Journal ref: Nature Communications, 10.1038 (2016)

Positive Exchange Bias between Permalloy and Twined (10-10)-Cr2O3 Films

Authors: Wei Yuan, Tianyu Wang, Tang Su, Qi Song, Wenyu Xing, Yangyang Chen, Wei Han

Abstract: We report the discovery of a positive exchange bias between Ni80Fe20 (Py) and twined (10-10)-Cr2O3 film near its blocking temperature (TB) when it is cooled in an in-plane magnetic field applied along 45 degrees from the two spin configurations of the Cr atoms. This is an abnormal behavior compared to the negative exchange bias at all temperatures below TB when the cooling and measuring magnetic f… ▽ More We report the discovery of a positive exchange bias between Ni80Fe20 (Py) and twined (10-10)-Cr2O3 film near its blocking temperature (TB) when it is cooled in an in-plane magnetic field applied along 45 degrees from the two spin configurations of the Cr atoms. This is an abnormal behavior compared to the negative exchange bias at all temperatures below TB when the cooling and measuring magnetic fields are applied along one of the two spin configurations of the Cr atoms. We speculate these results could be related to the exchange interactions between the twined structure of the (10-10)-Cr2O3 film epitaxially grown on the rutile (001)-TiO2 substrate. △ Less

Submitted 20 September, 2016; originally announced September 2016.

Comments: 11 pages, 5 figures, Journal of Magnetism and Magnetic Materials (In Press)

Journal ref: Journal of Magnetism and Magnetic Materials, 422, 397-401 (2017)

Observation of Inverse Edelstein Effect in Rashba-Split 2DEG between SrTiO3 and LaAlO3 at Room Temperature

Authors: Qi Song, Hongrui Zhang, Tang Su, Wei Yuan, Yangyang Chen, Wenyu Xing, Jing Shi, Ji Rong Sun, Wei Han

Abstract: The Rashba physics has been intensively studied in the field of spin orbitronics, for the purpose of searching novel physical properties and the FM magnetization switching for technology applications. Here, we report the observation of the inverse Edelstein effect up to room temperature in the Rashba-split 2DEG between two insulating oxides SrTiO3 and LaAlO3 with the LaAlO3 layer thickness from 3… ▽ More The Rashba physics has been intensively studied in the field of spin orbitronics, for the purpose of searching novel physical properties and the FM magnetization switching for technology applications. Here, we report the observation of the inverse Edelstein effect up to room temperature in the Rashba-split 2DEG between two insulating oxides SrTiO3 and LaAlO3 with the LaAlO3 layer thickness from 3 to 40 unit cells (UC). We further demonstrate that the spin voltage could be dramatically manipulated by electric field effect for the 2DEG between SrTiO3 and 3 UC LaAlO3. These results demonstrate that the Rashba-split 2DEG at the complex oxide interface can be used for room temperature efficient charge-and-spin conversion for the generation and detection of spin current. △ Less

Submitted 21 January, 2017; v1 submitted 20 September, 2016; originally announced September 2016.

Comments: 10 pages, 5 figures, Accepted to Science Advances

Journal ref: Science Advances, 3: e1602312 (2017)

Reduced-Rank Channel Estimation for Large-Scale MIMO Systems

Authors: Ko-Feng Chen, Yen-Cheng Liu, Yu T. Su

Abstract: We present two reduced-rank channel estimators for large-scale multiple-input, multiple-output (MIMO) systems and analyze their mean square error (MSE) performance. Taking advantage of the channel's transform domain sparseness, the estimators yield outstanding performance and may offer additional mean angle-of-arrival (AoA) information. It is shown that, for the estimators to be effective, one has… ▽ More We present two reduced-rank channel estimators for large-scale multiple-input, multiple-output (MIMO) systems and analyze their mean square error (MSE) performance. Taking advantage of the channel's transform domain sparseness, the estimators yield outstanding performance and may offer additional mean angle-of-arrival (AoA) information. It is shown that, for the estimators to be effective, one has to select a proper predetermined unitary basis (transform) and be able to determine the dominant channel rank and the associated subspace. Further MSE analysis reveals the relations among the array size, channel rank, signal-to-noise ratio (SNR), and the estimators' performance. It provides rationales for the proposed rank determination and mean AoA estimation algorithms as well. An angle alignment operation included in one of our channel models is proved to be effective in further reducing the required rank, shifting the dominant basis vectors' range (channel spectrum) and improving the estimator's performance when a suitable basis is used. We also draw insightful analogies among MIMO channel modeling, transform coding, parallel spatial search, and receive beamforming. Computer experiment results are provided to examine the numerical effects of various estimator parameters and the advantages of the proposed channel estimators and rank determination method. △ Less

Submitted 8 September, 2016; originally announced September 2016.

Comments: 12 pages, 10 figures, submitted to IEEE Trans. Wireless Commun

Crystal Structure Manipulation of the Exchange Bias in an Antiferromagnetic Film

Authors: Wei Yuan, Tang Su, Qi Song, Wenyu Xing, Yangyang Chen, Tianyu Wang, Zhangyuan Zhang, Xiumei Ma, Peng Gao, Jing Shi, Wei Han

Abstract: Exchange bias is one of the most extensively studied phenomena in magnetism, since it exerts a unidirectional anisotropy to a ferromagnet (FM) when coupled to an antiferromagnet (AFM) and the control of the exchange bias is therefore very important for technological applications, such as magnetic random access memory and giant magnetoresistance sensors. In this letter, we report the crystal struct… ▽ More Exchange bias is one of the most extensively studied phenomena in magnetism, since it exerts a unidirectional anisotropy to a ferromagnet (FM) when coupled to an antiferromagnet (AFM) and the control of the exchange bias is therefore very important for technological applications, such as magnetic random access memory and giant magnetoresistance sensors. In this letter, we report the crystal structure manipulation of the exchange bias in epitaxial hcp Cr2O3 films. By epitaxially growing twined (10-10) oriented Cr2O3 thin films, of which the c axis and spins of the Cr atoms lie in the film plane, we demonstrate that the exchange bias between Cr2O3 and an adjacent permalloy layer is tuned to in-plane from out-of-plane that has been observed in (0001) oriented Cr2O3 films. This is owing to the collinear exchange coupling between the spins of the Cr atoms and the adjacent FM layer. Such a highly anisotropic exchange bias phenomenon is not possible in polycrystalline films. △ Less

Submitted 3 June, 2016; originally announced June 2016.

Comments: To be published in Scientific Reports, 12 pages, 6 figures

Journal ref: Scientific Reports 6, 28397 (2016)

New Signal Designs for Enhanced Spatial Modulation

Authors: Chien-Chun Cheng, Hikmet Sari, Serdar Sezginer, Yu T. Su

Abstract: In this paper, we present three new signal designs for Enhanced Spatial Modulation (ESM), which was recently introduced by the present authors. The basic idea of ESM is to convey information bits not only by the index(es) of the active transmit antenna(s) as in conventional Spatial Modulation (SM), but also by the types of the signal constellations used. The original ESM schemes were designed with… ▽ More In this paper, we present three new signal designs for Enhanced Spatial Modulation (ESM), which was recently introduced by the present authors. The basic idea of ESM is to convey information bits not only by the index(es) of the active transmit antenna(s) as in conventional Spatial Modulation (SM), but also by the types of the signal constellations used. The original ESM schemes were designed with reference to single-stream SM and involved one or more secondary modulations in addition to the primary modulation. Compared to single-stream SM, they provided either higher throughput or improved signal-to-noise ratio (SNR). In the present paper, we focus on multi-stream SM (MSM) and present three new ESM designs leading to increasing SNR gains when they are operated at the same spectral efficiency. The secondary signal constellations used in the first two designs are based on a single geometric interpolation step in the signal constellation plane, while the third design also makes use of additional constellations derived through a second interpolation step. The new ESM signal designs are described for MIMO systems with four transmit antennas two of which are active, but we also briefly present extensions to higher numbers of antennas. Theoretical analysis and simulation results indicate that the proposed designs provide a significant SNR gain over MSM. △ Less

Submitted 29 May, 2016; originally announced May 2016.

Detection of Spatially-Modulated Signals in Doubly Selective Fading Channels With Imperfect CSI

Authors: Hsuan-Cheng Chang, Yen-Cheng Liu, Yu T. Su

Abstract: To detect spatially-modulated signals, a receiver needs the channel state information (CSI) of each transmit- receive antenna pair. Although the CSI is never perfect and varies in time, most studies on spatial modulation (SM) systems assume perfectly known CSI and time-invariant channel. The spatial correlations among multiple spatial subchannels, which have to be considered when CSI is imperfect,… ▽ More To detect spatially-modulated signals, a receiver needs the channel state information (CSI) of each transmit- receive antenna pair. Although the CSI is never perfect and varies in time, most studies on spatial modulation (SM) systems assume perfectly known CSI and time-invariant channel. The spatial correlations among multiple spatial subchannels, which have to be considered when CSI is imperfect, are also often neglected. In this paper, we release the above assumptions and take the CSI uncertainty along with the spatial-temporal selectivities into account. We derive the channel estimation error aware maximum likelihood (CEEA-ML) detectors as well as several low- complexity alternatives for PSK and QAM signals. As the CSI uncertainty depends on the channel estimator used, we consider both decision feedback and model based estimators in our study. The error rate performance of the ML and some suboptimal detectors is analyzed. Numerical results obtained by simulations and analysis show that the CEEA-ML detectors offer clear performance gain against conventional mismatched SM detectors and, in many cases, the proposed suboptimal detectors incur only minor performance loss. △ Less

Submitted 12 May, 2017; v1 submitted 21 May, 2016; originally announced May 2016.

Comments: 15 pages, 9 figures, 4 tables, submitted to IEEE Trans. Veh. Techol. in May 2017

Experimental Investigation of Temperature-Dependent Gilbert Damping in Permalloy Thin Films

Authors: Yuelei Zhao, Qi Song, See-Hun Yang, Tang Su, Wei Yuan, Stuart S. P. Parkin, Jing Shi, Wei Han

Abstract: The Gilbert damping of ferromagnetic materials is arguably the most important but least understood phenomenological parameter that dictates real-time magnetization dynamics. Understanding the physical origin of the Gilbert damping is highly relevant to developing future fast switching spintronics devices such as magnetic sensors and magnetic random access memory. Here, we report an experimental st… ▽ More The Gilbert damping of ferromagnetic materials is arguably the most important but least understood phenomenological parameter that dictates real-time magnetization dynamics. Understanding the physical origin of the Gilbert damping is highly relevant to developing future fast switching spintronics devices such as magnetic sensors and magnetic random access memory. Here, we report an experimental study of temperature-dependent Gilbert damping in permalloy (Py) thin films of varying thicknesses by ferromagnetic resonance. From the thickness dependence, two independent contributions to the Gilbert damping are identified, namely bulk damping and surface damping. Of particular interest, bulk damping decreases monotonically as the temperature decreases, while surface damping shows an enhancement peak at the temperature of ~50 K. These results provide an important insight to the physical origin of the Gilbert damping in ultrathin magnetic films. △ Less

Submitted 23 February, 2016; originally announced February 2016.

Comments: 13 pages, 6 figure, Scientific Reports (In Press)

Journal ref: Sci. Rep. 6, 22890; (2016)

Hall A Annual Report 2014

Authors: M. M. Dalton, E. Chudakov, J. Gomez, D. W. Higinbotham, C. Keppel, R. Michaels, L. Myers, K. Aniol, S. Iqbal, N. See, J. R. Arrington, M. V. Ivanov, M. Mihovilovič, S. Širca, N. Muangma, Dien Nguyen, R. Pomatsalyuk, O. Glamazdin, V. Vereshchaka, S. Riordan, T. Su, V. Sulkosky, P. Zhu

Abstract: Report of the experimental activities in Hall A at Thomas Jefferson National Accelerator Facility during 2013. Report of the experimental activities in Hall A at Thomas Jefferson National Accelerator Facility during 2013. △ Less

Submitted 20 November, 2015; originally announced November 2015.

On the redshift distribution and physical properties of ACT-selected DSFGs

Authors: T. Su, T. A. Marriage, V. Asboth, A. J. Baker, J. R. Bond, D. Crichton, M. J. Devlin, R. Dunner, D. Farrah, D. T. Frayer, M. B. Gralla, K. Hall, M. Halpern, A. I. Harris, M. Hilton, A. D. Hincks, J. P. Hughes, M. D. Niemack, L. A. Page, B. Partridge, J. Rivera, D. Scott, J. L. Sievers, R. J. Thornton, M. P. Viero , et al. (3 additional authors not shown)

Abstract: We present multi-wavelength detections of nine candidate gravitationally-lensed dusty star-forming galaxies (DSFGs) selected at 218GHz (1.4mm) from the ACT equatorial survey. Among the brightest ACT sources, these represent the subset of the total ACT sample lying in Herschel SPIRE fields, and all nine of the 218GHz detections were found to have bright Herschel counterparts. By fitting their spect… ▽ More We present multi-wavelength detections of nine candidate gravitationally-lensed dusty star-forming galaxies (DSFGs) selected at 218GHz (1.4mm) from the ACT equatorial survey. Among the brightest ACT sources, these represent the subset of the total ACT sample lying in Herschel SPIRE fields, and all nine of the 218GHz detections were found to have bright Herschel counterparts. By fitting their spectral energy distributions (SEDs) with a modified blackbody model with power-law temperature distribution, we find the sample has a median redshift of $z=4.1^{+1.1}_{-1.0}$ (68 per cent confidence interval), as expected for 218GHz selection, and an apparent total infrared luminosity of $\log_{10}(μL_{\rm IR}/{\rm L}_\odot) = 13.86^{+0.33}_{-0.30}$, which suggests that they are either strongly lensed sources or unresolved collections of unlensed DSFGs. The effective apparent diameter of the sample is $\sqrtμd= 4.2^{+1.7}_{-1.0}$kpc, further evidence of strong lensing or multiplicity, since the typical diameter of dusty star-forming galaxies is $1.0$--$2.5$ kpc. We emphasize that the effective apparent diameter derives from SED modelling without the assumption of optically thin dust (as opposed to image morphology). We find that the sources have substantial optical depth ($τ= 4.2^{+3.7}_{-1.9}$) to dust around the peak in the modified blackbody spectrum ($λ_{\rm obs} \le 500$ $μ$m), a result that is robust to model choice. △ Less

Submitted 14 September, 2016; v1 submitted 20 November, 2015; originally announced November 2015.

Comments: 18 pages, 9 figures. Accepted to MNRAS

Observation of surface states on heavily indium doped SnTe(111), a superconducting topological crystalline insulator

Authors: C. M. Polley, V. Jovic, T. -Y. Su, M. Saghir, D. Newby Jr., B. Kowalski, R. Jakiela, A. Barcz, M. Guziewicz, T. Balasubramanian, G. Balakrishnan, J. Laverock, K. E. Smith

Abstract: The topological crystalline insulator tin telluride is known to host superconductivity when doped with indium (Sn$_{1-x}$In$_{x}$Te), and for low indium contents ($x=0.04$) it is known that the topological surface states are preserved. Here we present the growth, characterization and angle resolved photoemission spectroscopy analysis of samples with much heavier In doping (up to $x\approx0.4$), a… ▽ More The topological crystalline insulator tin telluride is known to host superconductivity when doped with indium (Sn$_{1-x}$In$_{x}$Te), and for low indium contents ($x=0.04$) it is known that the topological surface states are preserved. Here we present the growth, characterization and angle resolved photoemission spectroscopy analysis of samples with much heavier In doping (up to $x\approx0.4$), a regime where the superconducting temperature is increased nearly fourfold. We demonstrate that despite strong p-type doping, Dirac-like surface states persist. △ Less

Submitted 18 February, 2016; v1 submitted 16 August, 2015; originally announced August 2015.

Journal ref: Phys. Rev. B 93, 075132 (2016)

Radner equilibrium in incomplete Levy models

Authors: Kasper Larsen, Tanawit Sae Sue

Abstract: We construct continuous-time equilibrium models based on a finite number of exponential utility investors. The investors' income rates as well as the stock's dividend rate are governed by discontinuous Levy processes. Our main result provides the equilibrium (i.e., bond and stock price dynamics) in closed-form. As an application, we show that the equilibrium Sharpe ratio can be increased and the e… ▽ More We construct continuous-time equilibrium models based on a finite number of exponential utility investors. The investors' income rates as well as the stock's dividend rate are governed by discontinuous Levy processes. Our main result provides the equilibrium (i.e., bond and stock price dynamics) in closed-form. As an application, we show that the equilibrium Sharpe ratio can be increased and the equilibrium interest rate can be decreased (simultaneously) when the investors' income streams cannot be traded. △ Less

Submitted 13 July, 2015; v1 submitted 10 July, 2015; originally announced July 2015.

Epitaxial growth and properties of La0.7Sr0.3MnO3 thin films with micrometer wide atomic terraces

Authors: Wei Yuan, Yuelei Zhao, Chi Tang, Tang Su, Qi Song, Jing Shi, Wei Han

Abstract: La0.7Sr0.3MnO3 (LSMO) films with extraordinarily wide atomic terraces are epitaxially grown on SrTiO3 (100) substrates by pulsed laser deposition. Atomic force microscopy measurements on the LSMO films show that the atomic step is ~ 4 Å and the atomic terrace width is more than 2 micrometers. For a 20 monolayers (MLs) LSMO film, the magnetization is determined to be 255 +- 15 emu/cm3 at room tempe… ▽ More La0.7Sr0.3MnO3 (LSMO) films with extraordinarily wide atomic terraces are epitaxially grown on SrTiO3 (100) substrates by pulsed laser deposition. Atomic force microscopy measurements on the LSMO films show that the atomic step is ~ 4 Å and the atomic terrace width is more than 2 micrometers. For a 20 monolayers (MLs) LSMO film, the magnetization is determined to be 255 +- 15 emu/cm3 at room temperature, corresponding to 1.70 + - 0.11 Bohr magneton per Mn atom. As the thickness of LSMO increases from 8 MLs to 20 MLs, the critical thickness for the temperature dependent insulator-to-metal behavior transition is shown to be 9 MLs. Furthermore, post-annealing in oxygen environment improves the electron transport and magnetic properties of the LSMO films. △ Less

Submitted 4 July, 2015; originally announced July 2015.

Comments: Accepted to Applied Physics Letter, 11 pages, 4 figures

Journal ref: Appl. Phys. Lett. 107, 022404 (2015)

3D visual analysis of seabed on smartphone

Authors: Zhihan Lv, Tianyun Su, Xiaoming Li, Shengzhong Feng

Abstract: We create a 'virtual-seabed' platform to realize the 3D visual analysis of seabed on smartphone. The 3D seabed platform is based on a 'section-drilling' model, implementing visualization and analysis of the integrated data of seabed on the 3D browser on smartphone. Some 3D visual analysis functions are developed. This work presents a thorough and interesting way of presenting seabed data on smartp… ▽ More We create a 'virtual-seabed' platform to realize the 3D visual analysis of seabed on smartphone. The 3D seabed platform is based on a 'section-drilling' model, implementing visualization and analysis of the integrated data of seabed on the 3D browser on smartphone. Some 3D visual analysis functions are developed. This work presents a thorough and interesting way of presenting seabed data on smartphone, which raises many application possibilities. This platform is another practical proof based on our WebVRGIS platform. △ Less

Submitted 4 April, 2015; originally announced April 2015.

Comments: 2015 IEEE Pacific Visualization Symposium (PacificVis)

ACM Class: I.3.7

Dynamic Weighted Bit-Flipping Decoding Algorithms for LDPC Codes

Authors: Tofar C. -Y. Chang, Yu T. Su

Abstract: Bit-flipping (BF) decoding of low-density parity-check codes is of low complexity but gives inferior performance in general. To improve performance and provide new BF decoder options for complexity-performance tradeoffs, we propose new designs for the flipping function (FF), the flipped bit selection (FBS) rule and the checksum weight updating schedule. The new FF adjusts the checksum weights in e… ▽ More Bit-flipping (BF) decoding of low-density parity-check codes is of low complexity but gives inferior performance in general. To improve performance and provide new BF decoder options for complexity-performance tradeoffs, we propose new designs for the flipping function (FF), the flipped bit selection (FBS) rule and the checksum weight updating schedule. The new FF adjusts the checksum weights in every iteration while our FBS rules take more information into account. These two modifications represent efforts to track more closely the evolutions of both check and variable nodes' reliabilities. Two selective update schedules are proposed to offer more performance and complexity tradeoffs. The combinations of the new FBS rule and known FFs result in new BF decoders with improved performance and a modest complexity increase. On the other hand, combining the new FF and FBS rule gives a new decoder with performance comparable to that of the normalized min-sum algorithm while if we use a much simpler FBS rule instead, the decoder suffers little performance loss with reduced complexity. We also present a simple decision-theoretical argument to justify the new checksum weight formula and a time-expanded factor graph model to explain the proposed selective weight-updating schedules. △ Less

Submitted 25 August, 2015; v1 submitted 11 January, 2015; originally announced January 2015.

Multi-channel Observations of Plasma Outflows and the Associated Small-Scale Magnetic Field Cacellations on the Edges of an Active Region

Authors: S. Liu, J. T. Su

Abstract: With the SDO/AIA instrument, continuous and intermittent plasma outflows are observed on the boundaries of an active region along two distinct open coronal loops. %with the speed of 30$\sim$200 km s$^{-1}$. By investigating the temporal sequence magnetograms obtained from HMI/SDO, it is found that small-scale magnetic reconnection probably plays an important role in the generation of the plasma ou… ▽ More With the SDO/AIA instrument, continuous and intermittent plasma outflows are observed on the boundaries of an active region along two distinct open coronal loops. %with the speed of 30$\sim$200 km s$^{-1}$. By investigating the temporal sequence magnetograms obtained from HMI/SDO, it is found that small-scale magnetic reconnection probably plays an important role in the generation of the plasma outflows in the coronal loops. It is found that the origin of the plasma outflows coincides with the locations of the small-scale magnetic fields with mixed polarities, which suggests that the plasma outflows along coronal loops probably results from the magnetic reconnection between the small-scale close emerging loops and the large-scale open active region coronal loops. △ Less

Submitted 14 May, 2014; originally announced May 2014.

Comments: 11 figures,23 pages. Ap&ss 2014

Statistical study of free magnetic energy and flare productivity of solar active regions

Authors: J. T. Su, J. Jing, S. Wang, T. Wiegelmann, H. M. Wang

Abstract: Photospheric vector magnetograms from Helioseismic and Magnetic Imager on board the Solar Dynamic Observatory are utilized as the boundary conditions to extrapolate both non-linear force-free and potential magnetic fields in solar corona. Based on the extrapolations, we are able to determine the free magnetic energy (FME) stored in active regions (ARs). Over 3000 vector magnetograms in 61 ARs were… ▽ More Photospheric vector magnetograms from Helioseismic and Magnetic Imager on board the Solar Dynamic Observatory are utilized as the boundary conditions to extrapolate both non-linear force-free and potential magnetic fields in solar corona. Based on the extrapolations, we are able to determine the free magnetic energy (FME) stored in active regions (ARs). Over 3000 vector magnetograms in 61 ARs were analyzed. We compare FME with ARs' flare index (FI) and find that there is a weak correlation ($<60\%$) between FME and FI. FME shows slightly improved flare predictability relative to total unsigned magnetic flux of ARs in the following two aspects: (1) the flare productivity predicted by FME is higher than that predicted by magnetic flux and (2) the correlation between FI and FME is higher than that between FI and magnetic flux. However, this improvement is not significant enough to make a substantial difference in time-accumulated FI, rather than individual flare, predictions. △ Less

Submitted 8 May, 2014; originally announced May 2014.

Comments: The paper was submitted to ApJ and it is accepted now

Dust formation, evolution, and obscuration effects in the very high-redshift universe

Authors: Eli Dwek, Johannes Staguhn, Richard G. Arendt, Attila Kovacs, Ting Su, Dominic J. Benford

Abstract: The evolution of dust at redshifts z>9, and consequently the dust properties, differs greatly from that in the local universe. In contrast to the local universe, core collapse supernovae (CCSNe) are the only source of thermally-condensed dust. Because of the low initial dust-to-gas mass ratio, grain destruction rates are low, so that CCSNe are net producers of interstellar dust. Galaxies with larg… ▽ More The evolution of dust at redshifts z>9, and consequently the dust properties, differs greatly from that in the local universe. In contrast to the local universe, core collapse supernovae (CCSNe) are the only source of thermally-condensed dust. Because of the low initial dust-to-gas mass ratio, grain destruction rates are low, so that CCSNe are net producers of interstellar dust. Galaxies with large initial gas mass or high mass infall rate will therefore have a more rapid net rate of dust production comported to galaxies with lower gas mass, even at the same star formation rate. The dust composition is dominated by silicates, which exhibit a strong rise in the UV opacity near the Lyman break. This "silicate-UV break" may be confused with the Lyman break, resulting in a misidentification of a galaxies' photometric redshift. In this paper we demonstrate these effects by analyzing the spectral energy distribution (SED) of MACS1149-JD, a lensed galaxy at z=9.6. A potential 2mm counterpart of MACS1149-JD has been identified with GISMO. While additional observations are required to corroborate this identification, we use this possible association to illustrate the physical processes and the observational effects of dust in the very high redshift universe. △ Less

Submitted 5 May, 2014; originally announced May 2014.

Comments: Accepted for publication in ApJ Letters

Composite Channel Estimation in Massive MIMO Systems

Authors: Ko-Feng Chen, Yen-Cheng Liu, Yu T. Su

Abstract: We consider a multiuser (MU) multiple-input multiple-output (MIMO) time-division duplexing (TDD) system in which the base station (BS) is equipped with a large number of antennas for communicating with single-antenna mobile users. In such a system the BS has to estimate the channel state information (CSI) that includes large-scale fading coefficients (LSFCs) and small-scale fading coefficients (SS… ▽ More We consider a multiuser (MU) multiple-input multiple-output (MIMO) time-division duplexing (TDD) system in which the base station (BS) is equipped with a large number of antennas for communicating with single-antenna mobile users. In such a system the BS has to estimate the channel state information (CSI) that includes large-scale fading coefficients (LSFCs) and small-scale fading coefficients (SSFCs) by uplink pilots. Although information about the former FCs are indispensable in a MU-MIMO or distributed MIMO system, they are usually ignored or assumed perfectly known when treating the MIMO CSI estimation problem. We take advantage of the large spatial samples of a massive MIMO BS to derive accurate LSFC estimates in the absence of SSFC information. With estimated LSFCs, SSFCs are then obtained using a rank-reduced (RR) channel model which in essence transforms the channel vector into a lower dimension representation. We analyze the mean squared error (MSE) performance of the proposed composite channel estimator and prove that the separable angle of arrival (AoA) information provided by the RR model is beneficial for enhancing the estimator's performance, especially when the angle spread of the uplink signal is not too large. △ Less

Submitted 3 December, 2013; originally announced December 2013.

Comments: 11 pages, 9 figures, submitted to IEEE Journal of Selected Topics in Signal Processing

Observations of a Quasi-Periodic Fast Propagating Magnetosonic Wave in Multi-Wavelength and Its Interaction with Other Magnetic Structures

Authors: Y. D. Shen, Y. Liu, J. T. Su, H. Li, X. F. Zhang, Z. J. Tian, R. J. Zhao, A. Elmhamdi

Abstract: We present an observational study of a quasi-periodic fast propagating (QFP) magnetosonic wave on 2012, April 23. The multiple wave trains were observed along an active region open loop system which has a divergence geometry. The wave trains were first observed in 171 A observations at a distance of 150 Mm from the footpoint of the guiding loop system and with a speed of 689 km/s, then they appear… ▽ More We present an observational study of a quasi-periodic fast propagating (QFP) magnetosonic wave on 2012, April 23. The multiple wave trains were observed along an active region open loop system which has a divergence geometry. The wave trains were first observed in 171 A observations at a distance of 150 Mm from the footpoint of the guiding loop system and with a speed of 689 km/s, then they appeared in 193 A observations after their interaction with a perpendicular underlaying loop system on the path, in the meantime, the wave speed decelerated to 343 km/s quickly within a short timescale. The sudden deceleration of the wave trains and their appearance in 193 A observations caused by the interaction are interpreted through geometric effect and the density increase of the guiding loop system, respectively. On the other hand, with Wavelet and Fourier analysis methods we find that the wave trains has a common period of 80 s with the associated flare. In addition, a few low frequencies are also identified in the QFP wave. We propose that the generation of the period of 80 s was caused by the periodic releasing of energy busts through some nonlinear processes in magnetic reconnection or the so-called oscillatory reconnection mechanism, while the low frequencies detected in the QFP wave were possibly the manifestations of the leakage of pressure-driven oscillations from the photosphere or chromosphere, which could be an important source for driving QFP waves in the low corona. Our observational results also indicate that the properties of the guiding magnetic structure such as the distributions of magnetic field and density as well as geometry are crucial for modulating the propagation behaviors of QFP waves. Therefore, QFP waves could be used for remote diagnostics of the local physical properties of the solar corona. △ Less

Submitted 12 August, 2013; v1 submitted 23 July, 2013; originally announced July 2013.

Comments: Accepted by Solar Physics, corrected version

On asymptotic description of passage through a resonance in quasi-linear Hamiltonian systems

Authors: Anatoly Neishtadt, Tan Su

Abstract: We consider a quasi-linear Hamiltonian system with one and a half degrees of freedom. The Hamiltonian of this system differs by a small, $\sim\varepsilon$, perturbing term from the Hamiltonian of a linear oscillatory system. We consider passage through a resonance: the frequency of the latter system slowly changes with time and passes through 0. The speed of this passage is of order of… ▽ More We consider a quasi-linear Hamiltonian system with one and a half degrees of freedom. The Hamiltonian of this system differs by a small, $\sim\varepsilon$, perturbing term from the Hamiltonian of a linear oscillatory system. We consider passage through a resonance: the frequency of the latter system slowly changes with time and passes through 0. The speed of this passage is of order of $\varepsilon$. We provide asymptotic formulas that describe effects of passage through a resonance with an accuracy $O(\varepsilon^{\frac32})$. This is an improvement of known results by Chirikov (1959), Kevorkian (1971, 1974) and Bosley (1996). The problem under consideration is a model problem that describes passage through an isolated resonance in multi-frequency quasi-linear Hamiltonian systems. △ Less

Submitted 31 October, 2012; v1 submitted 15 September, 2012; originally announced September 2012.

Comments: 45 pages, 2 figures

MSC Class: 37L50; 70H09; 37M05

New Constructions of Zero-Correlation Zone Sequences

Authors: Yen-Cheng Liu, Ching-Wei Chen, Yu T. Su

Abstract: In this paper, we propose three classes of systematic approaches for constructing zero correlation zone (ZCZ) sequence families. In most cases, these approaches are capable of generating sequence families that achieve the upper bounds on the family size ($K$) and the ZCZ width ($T$) for a given sequence period ($N$). Our approaches can produce various binary and polyphase ZCZ families with desir… ▽ More In this paper, we propose three classes of systematic approaches for constructing zero correlation zone (ZCZ) sequence families. In most cases, these approaches are capable of generating sequence families that achieve the upper bounds on the family size ($K$) and the ZCZ width ($T$) for a given sequence period ($N$). Our approaches can produce various binary and polyphase ZCZ families with desired parameters $(N,K,T)$ and alphabet size. They also provide additional tradeoffs amongst the above four system parameters and are less constrained by the alphabet size. Furthermore, the constructed families have nested-like property that can be either decomposed or combined to constitute smaller or larger ZCZ sequence sets. We make detailed comparisons with related works and present some extended properties. For each approach, we provide examples to numerically illustrate the proposed construction procedure. △ Less

Submitted 2 February, 2013; v1 submitted 27 August, 2012; originally announced August 2012.

Comments: 37 pages, submitted to IEEE Transactions on Information Theory

A Statistical Study on Force-Freeness of Solar Magnetic Fields in the Photosphere

Authors: S. Liu, J. T. Su, H. Q. Zhang, Y. Y. Deng, Y. Gao, X. Yang, X. J. Mao

Abstract: It is an indisputable fact that solar magnetic fields are force-free in the corona, where force free fields means that current and magnetic fields are parallel and there is no Lorentz force in the fields. While the force-free extent of photospheric magnetic fields remains open. In this paper, the statistical results about it is given. The vector magnetograms (namely, $B_{x}$, $B_{y}$ and $B_{z}$ i… ▽ More It is an indisputable fact that solar magnetic fields are force-free in the corona, where force free fields means that current and magnetic fields are parallel and there is no Lorentz force in the fields. While the force-free extent of photospheric magnetic fields remains open. In this paper, the statistical results about it is given. The vector magnetograms (namely, $B_{x}$, $B_{y}$ and $B_{z}$ in heliocentric coordinates) are employed, which are deduced and calibrated from Stokes spectra, observed by Solar Magnetic Field Telescope (SMFT) at Huairou Solar Observing Station (HSOS) are used. We study and calibrated 925 magnetograms calibrated by two sets of calibration coefficients, that indicate the relations between magnetic fields and the strength of Stokes spectrum and can be calculated either theoretically or empirically. The statistical results show that the majority of active region magnetic fields are not consistent with the force-free model. △ Less

Submitted 27 June, 2012; originally announced June 2012.

Comments: 10 pages, 5 figures, has been accepted by PASA

On phenomenon of scattering on resonances associated with discretisation of systems with fast rotating phase

Authors: Anatoly Neishtadt, Tan Su

Abstract: Numerical integration of ODEs by standard numerical methods reduces a continuous time problems to discrete time problems. Discrete time problems have intrinsic properties that are absent in continuous time problems. As a result, numerical solution of an ODE may demonstrate dynamical phenomena that are absent in the original ODE. We show that numerical integration of system with one fast rotating p… ▽ More Numerical integration of ODEs by standard numerical methods reduces a continuous time problems to discrete time problems. Discrete time problems have intrinsic properties that are absent in continuous time problems. As a result, numerical solution of an ODE may demonstrate dynamical phenomena that are absent in the original ODE. We show that numerical integration of system with one fast rotating phase lead to a situation of such kind: numerical solution demonstrate phenomenon of scattering on resonances that is absent in the original system. △ Less

Submitted 19 March, 2012; originally announced March 2012.

Comments: 10 pages, 5 figures

MSC Class: 34F15; 34C29; 65D30

Revision of Solar Spicule Classification

Authors: Y. Z. Zhang, K. Shibata, J. X. Wang, X. J. Mao, T. Matsumoto, Y. Liu, J. T. Su

Abstract: Solar spicules are the fundamental magnetic structures in the chromosphere and considered to play a key role in channelling the chromosphere and corona. Recently, it was suggested by De Pontieu et al. that there were two types of spicules with very different dynamic properties, which were detected by space- time plot technique in the Ca ii H line (3968 A) wavelength from Hinode/SOT observations. '… ▽ More Solar spicules are the fundamental magnetic structures in the chromosphere and considered to play a key role in channelling the chromosphere and corona. Recently, it was suggested by De Pontieu et al. that there were two types of spicules with very different dynamic properties, which were detected by space- time plot technique in the Ca ii H line (3968 A) wavelength from Hinode/SOT observations. 'Type I' spicule, with a 3-7 minute lifetime, undergoes a cycle of upward and downward motion; in contrast, 'Type II' spicule fades away within dozens of seconds, without descending phase. We are motivated by the fact that for a spicule with complicated 3D motion, the space-time plot, which is made through a slit on a fixed position, could not match the spicule behavior all the time and might lose its real life story. By revisiting the same data sets, we identify and trace 105 and 102 spicules in quiet sun (QS) and coronal hole (CH), respectively, and obtain their statistical dynamic properties. First, we have not found a single convincing example of 'Type II' spicules. Secondly, more than 60% of the identified spicules in each region show a complete cycle, i.e., majority spicules are 'Type I'. Thirdly, the lifetime of spicules in QS and CH are 148 s and 112 s, respectively, but there is no fundamental lifetime difference between the spicules in QS and CH reported earlier. Therefore, the suggestion of coronal heating by 'Type II' spicules should be taken with cautions. Subject headings: Sun: chromosphere Sun:transition region Sun:corona △ Less

Submitted 20 February, 2012; originally announced February 2012.

Comments: accepted by ApJ

Journal ref: The Astrophysical Journal, 750:16 (9pp), 2012 May 1

A Non-Disjoint Group Shuffled Decoding for LDPC Codes

Authors: Yen-Cheng Hsu, Tofar C. -Y. Chang, Yu T. Su, Jian-Jia Weng

Abstract: To reduce the implementation complexity of a belief propagation (BP) based low-density parity-check (LDPC) decoder, shuffled BP decoding schedules, which serialize the decoding process by dividing a complete parallel message-passing iteration into a sequence of sub-iterations, have been proposed. The so-called group horizontal shuffled BP algorithm partitions the check nodes of the code graph into… ▽ More To reduce the implementation complexity of a belief propagation (BP) based low-density parity-check (LDPC) decoder, shuffled BP decoding schedules, which serialize the decoding process by dividing a complete parallel message-passing iteration into a sequence of sub-iterations, have been proposed. The so-called group horizontal shuffled BP algorithm partitions the check nodes of the code graph into groups to perform group-by-group message-passing decoding. This paper proposes a new grouping technique to accelerate the message-passing rate. Performance of the proposed algorithm is analyzed by a Gaussian approximation approach. Both analysis and numerical experiments verify that the new algorithm does yield a convergence rate faster than that of existing conventional or group shuffled BP decoder with the same computing complexity constraint. △ Less

Submitted 6 February, 2012; originally announced February 2012.

Comments: 5 pages, 6 figures, submitted to ISIT2012

Error Analysis regarding the calculation of NLFF Field

Authors: S. Liu, H. Q. Zhang, J. T. Su

Abstract: Field extrapolation is an alternative method to study chromospheric and coronal magnetic fields. In this paper, two semi-analytical solutions of force- free fields (Low and Lou, 1990) have been used to study the errors of nonlin- ear force-free (NLFF) fields based on force-free factor alpha. Three NLFF fields are extrapolated by approximate vertical integration (AVI) Song et al. (2006), boundary i… ▽ More Field extrapolation is an alternative method to study chromospheric and coronal magnetic fields. In this paper, two semi-analytical solutions of force- free fields (Low and Lou, 1990) have been used to study the errors of nonlin- ear force-free (NLFF) fields based on force-free factor alpha. Three NLFF fields are extrapolated by approximate vertical integration (AVI) Song et al. (2006), boundary integral equation (BIE) Yan and Sakurai (2000) and optimization (Opt.) Wiegelmann (2004) methods. Compared with the first semi-analytical field, it is found that the mean values of absolute relative standard deviations (RSD) of alpha along field lines are about 0.96-1.05, 0.94-1.07 and 0.46-0.72 for AVI, BIE and Opt. fields, respectively. While for the second semi-analytical field, they are about 0.80-1.02, 0.63-1.34 and 0.33-0.55 for AVI, BIE and Opt. fields, respectively. As for the analytical field, the calculation error of hjRSDji is about 0.1 » 0.2. It is also found that RSD does not apparently depend on the length of field line. These provide the basic estimation on the deviation of extrapolated field obtained by proposed methods from the real force-free field. △ Less

Submitted 20 September, 2011; originally announced September 2011.

Comments: 22 pages, 13 figures, "Accepted for publication in Astrophysics & Space Science"