-
Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS$_2$ Fillers
Authors:
Saba Baraghani,
Zahra Barani,
Yassamin Ghafouri,
Amirmahdi Mohammadzadeh,
Sriharsha Sudhindra,
Tina T. Salguero,
Fariborz Kargar,
Alexander A. Balandin
Abstract:
We report on the preparation of inks containing fillers derived from quasi-two-dimensional charge-density-wave materials, their application for inkjet printing, and the evaluation of their electronic properties in printed thin film form. The inks were prepared by liquid-phase exfoliation of CVT-grown 1T-TaS$_2$ crystals to produce fillers with nm-scale thickness and um-scale lateral dimensions. Ex…
▽ More
We report on the preparation of inks containing fillers derived from quasi-two-dimensional charge-density-wave materials, their application for inkjet printing, and the evaluation of their electronic properties in printed thin film form. The inks were prepared by liquid-phase exfoliation of CVT-grown 1T-TaS$_2$ crystals to produce fillers with nm-scale thickness and um-scale lateral dimensions. Exfoliated 1T-TaS$_2$ was dispersed in a mixture of isopropyl alcohol and ethylene glycol to allow fine-tuning of their thermo-physical properties for inkjet printing. The temperature-dependent electrical and current fluctuation measurements of printed thin films demonstrated that the charge-density-wave properties of 1T-TaS$_2$ are preserved after processing. The functionality of the printed thin-film devices can be defined by the nearly-commensurate to commensurate charge-density-wave phase transition of individual exfoliated 1T-TaS$_2$ fillers rather than by electron-hopping transport between them. These results provide pathways for the development of printed electronics with diverse functionality achieved by the incorporation of quasi-two-dimensional van der Waals quantum materials.
△ Less
Submitted 15 January, 2022;
originally announced January 2022.
-
Thermal Transport in Graphene Composites: The Effect of Lateral Dimensions of Graphene Fillers
Authors:
Sriharsha Sudhindra,
Farnia Rashvand,
Dylan Wright,
Zahra Barani,
Aleksey D. Drozdov,
Saba Baraghani,
Claudia Backes,
Fariborz Kargar,
Alexander A. Balandin
Abstract:
We report on the investigation of thermal transport in non-cured silicone composites with graphene fillers of different lateral dimensions. Graphene fillers are comprised of few-layer graphene flakes with lateral sizes in the range from 400 nm to 1200 nm and number of atomic planes from one to ~100. The distribution of the lateral dimensions and thicknesses of graphene fillers has been determined…
▽ More
We report on the investigation of thermal transport in non-cured silicone composites with graphene fillers of different lateral dimensions. Graphene fillers are comprised of few-layer graphene flakes with lateral sizes in the range from 400 nm to 1200 nm and number of atomic planes from one to ~100. The distribution of the lateral dimensions and thicknesses of graphene fillers has been determined via atomic force microscopy statistics. It was found that in the examined range of the lateral dimensions the thermal conductivity of the composites increases with the increasing size of the graphene fillers. The observed difference in thermal properties can be related to the average gray phonon mean free path in graphene, which has been estimated to be around ~800 nm at room temperature. The thermal contact resistance of composites with graphene fillers of 1200-nm lateral dimensions was also smaller than that of composites with graphene fillers of 400-nm lateral dimensions. The effects of the filler loading fraction and the filler size on the thermal conductivity of the composites were rationalized within the Kanari model. The obtained results are important for optimization of graphene fillers for applications in thermal interface materials for heat removal from high-power-density electronics.
△ Less
Submitted 18 August, 2021;
originally announced August 2021.
-
Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials
Authors:
Saba Baraghani,
Jehad Abourahma,
Zahra Barani,
Amirmahdi Mohammadzadeh,
Sriharsha Sudhindra,
Alexey Lipatov,
Alexander Sinitskii,
Fariborz Kargar,
Alexander A. Balandin
Abstract:
We report on fabrication and characterization of electronic devices printed with inks of quasi-1D van der Waals materials. The quasi-1D van der Waals materials are characterized by 1D motifs in their crystal structure, which allows for their exfoliation into bundles of atomic chains. The ink was prepared by the liquid-phase exfoliation of crystals of TiS3 semiconductor into quasi-1D nanoribbons di…
▽ More
We report on fabrication and characterization of electronic devices printed with inks of quasi-1D van der Waals materials. The quasi-1D van der Waals materials are characterized by 1D motifs in their crystal structure, which allows for their exfoliation into bundles of atomic chains. The ink was prepared by the liquid-phase exfoliation of crystals of TiS3 semiconductor into quasi-1D nanoribbons dispersed in a mixture of ethanol and ethylene glycol. The temperature dependent electrical measurements indicate that electron transport in the printed devices is dominated by the electron hopping mechanisms. The low-frequency electronic noise in the printed devices is of 1/f type near room temperature (f is the frequency). The abrupt changes in the temperature dependence of the noise spectral density and the spectrum itself can be indicative of the phase transition in individual TiS3 nanoribbons as well as modifications in the hopping transport regime. The obtained results attest to the potential of quasi-1D van der Waals materials for applications in printed electronics.
△ Less
Submitted 8 July, 2021;
originally announced July 2021.
-
Noncured Graphene Thermal Interface Materials: Minimizing the Thermal Contact Resistance
Authors:
Sriharsha Sudhindra,
Fariborz Kargar,
Alexander A. Balandin
Abstract:
We report on experimental investigation of thermal contact resistance of the noncuring graphene thermal interface materials with the surfaces characterized by different degree of roughness. It is found that the thermal contact resistance depends on the graphene loading non-monotonically, achieving its minimum at the loading fraction of ~15 wt.%. Increasing the surface roughness by ~1 micrometer re…
▽ More
We report on experimental investigation of thermal contact resistance of the noncuring graphene thermal interface materials with the surfaces characterized by different degree of roughness. It is found that the thermal contact resistance depends on the graphene loading non-monotonically, achieving its minimum at the loading fraction of ~15 wt.%. Increasing the surface roughness by ~1 micrometer results in approximately the factor of x2 increase in the thermal contact resistance for this graphene loading. The obtained dependences of the thermal conductivity, thermal contact resistance, and the total thermal resistance of the thermal interface material layer on the graphene loading and surface roughness indicate the need for optimization of the loading fraction for specific materials and roughness of the connecting surfaces. Our results are important for developing graphene technologies for thermal management of high-power-density electronics.
△ Less
Submitted 3 June, 2021;
originally announced June 2021.
-
Electromagnetic-Polarization Selective Composites with Quasi-1D van der Waals Metallic Fillers
Authors:
Zahra Barani,
Fariborz Kargar,
Yassamin Ghafouri,
Saba Baraghani,
Sriharsha Sudhindra,
Amirmahdi Mohammadzadeh,
Tina T. Salguero,
Alexander A. Balandin
Abstract:
We report on the preparation of flexible polymer composite films with aligned metallic fillers comprised of atomic chain bundles of the quasi-one-dimensional (1D) van der Waals material tantalum triselenide, TaSe3. The material functionality, embedded at the nanoscale level, is achieved by mimicking the design of an electromagnetic aperture grid antenna. The processed composites employ chemically…
▽ More
We report on the preparation of flexible polymer composite films with aligned metallic fillers comprised of atomic chain bundles of the quasi-one-dimensional (1D) van der Waals material tantalum triselenide, TaSe3. The material functionality, embedded at the nanoscale level, is achieved by mimicking the design of an electromagnetic aperture grid antenna. The processed composites employ chemically exfoliated TaSe3 nanowires as the grid building blocks incorporated within the thin film. Filler alignment is achieved using the "blade coating" method. Measurements conducted in the X-band frequency range demonstrate that the electromagnetic transmission through such films can be varied significantly by changing the relative orientations of the quasi-1D fillers and the polarization of the electromagnetic wave. We argue that such polarization-sensitive polymer films with quasi-1D fillers are applicable to advanced electromagnetic interference shielding in future communication systems.
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
