-
Disentangling superconductor and dielectric microwave losses in sub-micron $\rm Nb$/$\rm TEOS-SiO_2$ interconnects using a multi-mode microstrip resonator
Authors:
Cougar A. T. Garcia,
Nancyjane Bailey,
Chris Kirby,
Joshua A. Strong,
Anna Yu. Herr,
Steven M. Anlage,
Vladimir V. Talanov
Abstract:
Understanding the origins of power loss in superconducting interconnects is essential for the energy efficiency and scalability of superconducting digital logic. At microwave frequencies, power dissipates in both the dielectrics and superconducting wires, and these losses can be of comparable magnitude. A novel method to accurately disentangle such losses by exploiting their frequency dependence u…
▽ More
Understanding the origins of power loss in superconducting interconnects is essential for the energy efficiency and scalability of superconducting digital logic. At microwave frequencies, power dissipates in both the dielectrics and superconducting wires, and these losses can be of comparable magnitude. A novel method to accurately disentangle such losses by exploiting their frequency dependence using a multi-mode transmission line resonator, supported by a geometric factor concept and a 3D superconductor finite element method (FEM) modeling, is described. Using the method we optimized a planarized fabrication process of reciprocal quantum logic (RQL) for the interconnect loss at 4.2 K and GHz frequencies. The interconnects are composed of niobium ($\rm Nb$) insulated by silicon dioxide made with a tetraethyl orthosilicate precursor ($\rm TEOS-SiO_2$). Two process generations use damascene fabrication, and the third one uses Cloisonné fabrication. For all three, $\rm TEOS-SiO_2$ exhibits a dielectric loss tangent $\tan δ= 0.0012 \pm 0.0001$, independent of $\rm Nb$ wire width over $0.25 - 4 \: μm$. The $\rm Nb$ loss varies with both the processing and the wire width. For damascene fabrication, scanning transmission electron microscopy (STEM) and energy dispersive X-ray spectroscopy (EDS) reveal that Nb oxide and Nb grain growth orientation increase the loss above the Bardeen Cooper Schrieffer (BCS) minimum theoretical resistance $R _{BCS}$. For Cloisonné fabrication, the $0.25 \: μm$ wide $\rm Nb$ wires exhibit an intrinsic resistance $R_s = 13 \pm 1.4 \: μΩ$ at 10 GHz, which is below $R_{BCS} \approx 17 \: μΩ$. That is arguably the lowest resistive loss reported for $\rm Nb$.
△ Less
Submitted 19 March, 2023;
originally announced March 2023.
-
Josephson junction microwave modulators for qubit control
Authors:
O. Naaman,
J. A. Strong,
D. G. Ferguson,
J. Egan,
N. Bailey,
R. T. Hinkey
Abstract:
We demonstrate Josephson junction based double-balanced mixer and phase shifter circuits operating at 6-10 GHz, and integrate these components to implement both a monolithic amplitude/phase vector modulator and a quadrature mixer. The devices are actuated by flux signals, dissipate no power on chip, exhibit input saturation powers in excess of 1 nW, and provide cryogenic microwave modulation solut…
▽ More
We demonstrate Josephson junction based double-balanced mixer and phase shifter circuits operating at 6-10 GHz, and integrate these components to implement both a monolithic amplitude/phase vector modulator and a quadrature mixer. The devices are actuated by flux signals, dissipate no power on chip, exhibit input saturation powers in excess of 1 nW, and provide cryogenic microwave modulation solutions for integrated control of superconducting qubits.
△ Less
Submitted 22 February, 2017; v1 submitted 25 October, 2016;
originally announced October 2016.
-
Tripartite interactions between two phase qubits and a resonant cavity
Authors:
F. Altomare,
J. I. Park,
K. Cicak,
M. A. Sillanpää,
MS. Allman,
D. Li,
A. Sirois,
J. A. Strong,
J. D. Whittaker,
R. W. Simmonds
Abstract:
The creation and manipulation of multipartite entangled states is important for advancements in quantum computation and communication, and for testing our fundamental understanding of quantum mechanics and precision measurements. Multipartite entanglement has been achieved by use of various forms of quantum bits (qubits), such as trapped ions, photons, and atoms passing through microwave cavities.…
▽ More
The creation and manipulation of multipartite entangled states is important for advancements in quantum computation and communication, and for testing our fundamental understanding of quantum mechanics and precision measurements. Multipartite entanglement has been achieved by use of various forms of quantum bits (qubits), such as trapped ions, photons, and atoms passing through microwave cavities. Quantum systems based on superconducting circuits have been used to control pair-wise interactions of qubits, either directly, through a quantum bus, or via controllable coupling. Here, we describe the first demonstration of coherent interactions of three directly coupled superconducting quantum systems, two phase qubits and a resonant cavity. We introduce a simple Bloch-sphere-like representation to help one visualize the unitary evolution of this tripartite system as it shares a single microwave photon. With careful control and timing of the initial conditions, this leads to a protocol for creating a rich variety of entangled states. Experimentally, we provide evidence for the deterministic evolution from a simple product state, through a tripartite W-state, into a bipartite Bell-state. These experiments are another step towards deterministically generating multipartite entanglement in superconducting systems with more than two qubits.
△ Less
Submitted 31 March, 2010;
originally announced April 2010.
-
Search for neutral Higgs bosons decaying into four taus at LEP2
Authors:
ALEPH Collaboration,
S. Schael,
R. Barate,
R. Brunelière,
I. De Bonis,
D. Decamp,
C. Goy,
S. Jézéquel,
J. -P. Lees,
F. Martin,
E. Merle,
M. -N. Minard,
B. Pietrzyk,
B. Trocmé S. Bravo,
M. P. Casado,
M. Chmeissani,
J. M. Crespo,
E. Fernandez,
M. Fernandez-Bosman,
Ll. Garrido,
M. Martinez,
A. Pacheco,
H. Ruiz,
A. Colaleo,
D. Creanza
, et al. (236 additional authors not shown)
Abstract:
A search for the production and non-standard decay of a Higgs boson, h, into four taus through intermediate pseudoscalars, a, is conducted on 683 pb-1 of data collected by the ALEPH experiment at centre-of-mass energies from 183 to 209 GeV. No excess of events above background is observed, and exclusion limits are placed on the combined production cross section times branching ratio, ξ^2 = σ(e+e…
▽ More
A search for the production and non-standard decay of a Higgs boson, h, into four taus through intermediate pseudoscalars, a, is conducted on 683 pb-1 of data collected by the ALEPH experiment at centre-of-mass energies from 183 to 209 GeV. No excess of events above background is observed, and exclusion limits are placed on the combined production cross section times branching ratio, ξ^2 = σ(e+e- --> Zh)/σ_{SM}(e+e- --> Zh) x B(h --> aa)x B(a --> τ^+τ^-)^2. For mh < 107 GeV/c2 and 4 < ma < 10 GeV/c2, ξ^2 > 1 is excluded at the 95% confidence level.
△ Less
Submitted 19 April, 2010; v1 submitted 2 March, 2010;
originally announced March 2010.
-
Measurement crosstalk between two phase qubits coupled by a coplanar waveguide
Authors:
Fabio Altomare,
Katarina Cicak,
Mika A. Sillanpää,
Michael S. Allman,
Adam J. Sirois,
Dale Li,
Jae I. Park,
Joshua A. Strong,
John D. Teufel,
Jed D. Whittaker,
Raymond W. Simmonds
Abstract:
We analyze the measurement crosstalk between two flux-biased phase qubits coupled by a resonant coplanar waveguide cavity. After the first qubit is measured, the superconducting phase can undergo damped oscillations resulting in an a.c. voltage that produces a frequency chirped noise signal whose frequency crosses that of the cavity. We show experimentally that the coplanar waveguide cavity acts…
▽ More
We analyze the measurement crosstalk between two flux-biased phase qubits coupled by a resonant coplanar waveguide cavity. After the first qubit is measured, the superconducting phase can undergo damped oscillations resulting in an a.c. voltage that produces a frequency chirped noise signal whose frequency crosses that of the cavity. We show experimentally that the coplanar waveguide cavity acts as a bandpass filter that can significantly reduce the crosstalk signal seen by the second qubit when its frequency is far from the cavity's resonant frequency. We present a simple classical description of the qubit behavior that agrees well with the experimental data. These results suggest that measurement crosstalk between superconducting phase qubits can be reduced by use of linear or possibly nonlinear resonant cavities as coupling elements.
△ Less
Submitted 2 February, 2010;
originally announced February 2010.
-
Low-loss superconducting resonant circuits using vacuum-gap-based microwave components
Authors:
Katarina Cicak,
Dale Li,
Joshua A. Strong,
Michael S. Allman,
Fabio Altomare,
Adam J. Sirois,
Jed D. Whittaker,
John D. Teufel,
Raymond W. Simmonds
Abstract:
We have produced high-quality complex microwave circuits, such as multiplexed resonators and superconducting phase qubits, using a "vacuum-gap" technology that eliminates lossy dielectric materials. We have improved our design and fabrication strategy beyond our earlier work, leading to increased yield, enabling the realization of these complex circuits. We incorporate both novel vacuum-gap wiring…
▽ More
We have produced high-quality complex microwave circuits, such as multiplexed resonators and superconducting phase qubits, using a "vacuum-gap" technology that eliminates lossy dielectric materials. We have improved our design and fabrication strategy beyond our earlier work, leading to increased yield, enabling the realization of these complex circuits. We incorporate both novel vacuum-gap wiring crossovers (VGX) for gradiometric inductors and vacuum-gap capacitors(VGC) on chip to produce resonant circuits that have large internal quality factors (30,000<Q<165,000) at 50 mK, outperforming most dielectric-filled devices. Resonators with VGCs as large as 180 pF confirm single mode behavior of our lumped-element components.
△ Less
Submitted 25 June, 2010; v1 submitted 27 October, 2009;
originally announced October 2009.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
Vacuum-Gap Capacitors for Low-Loss Superconducting Resonant Circuits
Authors:
Katarina Cicak,
Michael S. Allman,
Joshua A. Strong,
Kevin D. Osborn,
Raymond W. Simmonds
Abstract:
Low-loss microwave components are used in many superconducting resonant circuits from multiplexed readouts of low-temperature detector arrays to quantum bits. Two-level system defects in amorphous dielectric materials cause excess energy loss. In an effort to improve capacitor components, we have used optical lithography and micromachining techniques to develop superconducting parallel-plate cap…
▽ More
Low-loss microwave components are used in many superconducting resonant circuits from multiplexed readouts of low-temperature detector arrays to quantum bits. Two-level system defects in amorphous dielectric materials cause excess energy loss. In an effort to improve capacitor components, we have used optical lithography and micromachining techniques to develop superconducting parallel-plate capacitors in which lossy dielectrics are replaced by vacuum gaps. Resonance measurements at 50 mK on lumped LC circuits that incorporate these vacuum-gap capacitors (VGCs) reveal loss tangents at low powers as low as 4x10^{-5}, significantly lower than with capacitors using amorphous dielectrics. VGCs are structurally robust, small, and easily scaled to capacitance values above 100 pF.
△ Less
Submitted 10 October, 2008;
originally announced October 2008.
-
Frequency-Tunable Josephson Junction Resonator for Quantum Computing
Authors:
K. D. Osborn,
J. A. Strong,
A. J. Sirois,
R. W. Simmonds
Abstract:
We have fabricated and measured a high-Q Josephson junction resonator with a tunable resonance frequency. A dc magnetic flux allows the resonance frequency to be changed by over 10 %. Weak coupling to the environment allows a quality factor of $\thicksim$7000 when on average less than one photon is stored in the resonator. At large photon numbers, the nonlinearity of the Josephson junction creat…
▽ More
We have fabricated and measured a high-Q Josephson junction resonator with a tunable resonance frequency. A dc magnetic flux allows the resonance frequency to be changed by over 10 %. Weak coupling to the environment allows a quality factor of $\thicksim$7000 when on average less than one photon is stored in the resonator. At large photon numbers, the nonlinearity of the Josephson junction creates two stable oscillation states. This resonator can be used as a tool for investigating the quality of Josephson junctions in qubits below the single photon limit, and can be used as a microwave qubit readout at high photon numbers.
△ Less
Submitted 4 March, 2007;
originally announced March 2007.
