-
A Non-planar ReBCO Test Coil with 3D-printed Aluminum Support Structure for the EPOS Stellarator
Authors:
Paul Huslage,
Tristan Schuler,
Pedro F. Gil,
Vitali Brack,
Dylan Schmeling,
Diego A. R. Orona,
Elisabeth von Schoenberg,
Timo Thun,
Jason. Smoniewski,
Eve V. Stenson
Abstract:
We report on the test of a small scale, non-planar coil using non-insulated ReBCO tape wound on a 3D-printed aluminum support structure. A 3D-scan of the winding frame which was printed out of AlSi10Mg using selective laser melting, showed peak manufacturing deviations of 0.3 mm. We tested the coil with 21 turns of 3 mm wide tape cooled both by liquid nitrogen and with a cryocooler. We achieved a…
▽ More
We report on the test of a small scale, non-planar coil using non-insulated ReBCO tape wound on a 3D-printed aluminum support structure. A 3D-scan of the winding frame which was printed out of AlSi10Mg using selective laser melting, showed peak manufacturing deviations of 0.3 mm. We tested the coil with 21 turns of 3 mm wide tape cooled both by liquid nitrogen and with a cryocooler. We achieved a central field strength of up to 21 mT which agrees with the prediction suggesting that we manufactured the coil without defects. The peak field was reached at a supply current of 120 A. The current leads showed a contact resistance of $\left(2.25\pm0.13\right)μΩ$. The discharge time $L/R$ was found to be 0.63 s in liquid nitrogen and 2.92 s when cooled by the cryocooler. From this we estimate a winding pack temperature of 41 K.
△ Less
Submitted 13 May, 2025;
originally announced May 2025.
-
Strain Optimization for ReBCO High-Temperature Superconducting Stellarator Coils in SIMSOPT
Authors:
Paul Huslage,
Elisabeth J. Paul,
Mohammed Haque. Pedro F. Gil,
Nicolo Foppiani,
Jason Smoniewsk,
Eve. V. Stenson
Abstract:
This work provides an optimization mechanism to ensure the compatibility of ReBCO (Rare-earth Barium Copper Oxide) high-temperature superconducting (HTS) tapes with non-planar stellarator coils. ReBCO coils enable higher field strengths and operating temperatures for the magnet systems of future fusion reactors but are sensitive to strain due to their brittle, ceramic functional layer. We have imp…
▽ More
This work provides an optimization mechanism to ensure the compatibility of ReBCO (Rare-earth Barium Copper Oxide) high-temperature superconducting (HTS) tapes with non-planar stellarator coils. ReBCO coils enable higher field strengths and operating temperatures for the magnet systems of future fusion reactors but are sensitive to strain due to their brittle, ceramic functional layer. We have implemented a metric to optimize strain on stellarator coils made from ReBCO superconductors into the stellarator optimization framework \texttt{SIMSOPT} and used it to design new stellarator coil configurations. To ensure structural integrity of coils wound with HTS tape, we introduce a penalty on binormal curvature and torsion along a coil. It can be used to optimize the orientation of the winding path for a given coil filament or to jointly optimize orientation and coil filament. We apply the strain optimization to three cases. For the EPOS (Electrons and Positrons in an Optimized Stellarator) design, we combine the strain penalty with an objective for quasisymmetry into a single-stage optimization; this enables us to find a configuration with excellent quasisymmetry at the smallest possible size compatible with the use of ReBCO tape. For CSX (Columbia Stellarator eXperiment), in addition to HTS strain, we add a penalty to prevent net tape rotation to ease the coil winding process. If the strain is calculated for a coil at reactor scale, we find a considerable variation of the binormal and torsional strain over the cross section of the large winding pack (0.5\,m x 0.5\,m). By exploiting the overall orientation of the winding pack as a degree of freedom, we can reduce binormal and torsional strains below limits for every ReBCO stack.
△ Less
Submitted 3 September, 2024;
originally announced September 2024.
-
Annihilation-Gamma-based Diagnostic Techniques for Magnetically Confined Electron-Positron Pair Plasma
Authors:
J. von der Linden,
S. Nißl,
A. Deller,
J. Horn-Stanja,
J. R. Danielson,
M. R. Stoneking,
A. Card,
T. Sunn Pedersen,
E. V. Stenson
Abstract:
Efforts are underway to magnetically confine electron--positron pair plasmas to study their unique behavior, which is characterized by significant changes in plasma time and length scales, supported waves, and unstable modes. However, use of conventional plasma diagnostics presents challenges with these low-density and annihilating matter-antimatter plasma. To address this problem, we propose to d…
▽ More
Efforts are underway to magnetically confine electron--positron pair plasmas to study their unique behavior, which is characterized by significant changes in plasma time and length scales, supported waves, and unstable modes. However, use of conventional plasma diagnostics presents challenges with these low-density and annihilating matter-antimatter plasma. To address this problem, we propose to develop techniques based on the distinct emission provided by annihilation. This emission exhibits two spatial correlations: the distance attenuation of isotropic sources and the back-to-back propagation of momentum-preserving 2-$γ$ annihilation. We present the results of our analysis of the $γ$ emission rate and the spatial profile of the annihilation in a magnetized pair plasma from direct pair collisions, from the formation and decay of positronium, as well as from transport processes. In order to demonstrate the effectiveness of annihilation-based techniques, we tested them on annular $γ$ emission profiles produced by a $β^+$ radioisotope on a rotating turntable. Direct and positronium-mediated annihilation result in overlapping volumetric $γ$ sources, and the 2-$γ$ emission from these volumetric sources can be tomographically reconstructed from coincident counts in multiple detectors. Transport processes result in localized annihilation where field lines intersect walls, limiters, or internal magnets. These localized sources can be identified by the fractional $γ$ counts on spatially distributed detectors.
△ Less
Submitted 29 June, 2023;
originally announced June 2023.
-
Injection of Positrons into a Dense Electron Cloud in a Magnetic Dipole Trap
Authors:
M. Singer,
M. R. Stoneking,
E. V. Stenson,
A. Deller,
A. Card,
S. Nißl,
J. Horn-Stanja,
T. Sunn Pedersen,
H. Saitoh,
C. Hugenschmidt
Abstract:
The creation of an electron space charge in a dipole magnetic trap and the subsequent injection of positrons has been experimentally demonstrated. Positrons (5eV) were magnetically guided from their source and injected into the trapping field generated by a permanent magnet (0.6T at the poles) using a cross field E $\times$ B drift, requiring tailored electrostatic and magnetic fields. The electro…
▽ More
The creation of an electron space charge in a dipole magnetic trap and the subsequent injection of positrons has been experimentally demonstrated. Positrons (5eV) were magnetically guided from their source and injected into the trapping field generated by a permanent magnet (0.6T at the poles) using a cross field E $\times$ B drift, requiring tailored electrostatic and magnetic fields. The electron cloud is created by thermionic emission from a tungsten filament. The maximum space charge potential of the electron cloud reaches -42V, which is consistent with an average electron density of ($4 \pm 2$) $\times 10^{12}$ $\text{m}^{-3}$ and a Debye length of ($2 \pm 1$) $\text{cm}$. We demonstrate that the presence of this space potential does not hamper efficient positron injection. Understanding the effects of the negative space charge on the injection and confinement of positrons represents an important intermediate step towards the production of a confined electron-positron pair plasma.
△ Less
Submitted 19 March, 2021;
originally announced March 2021.
