-
Three-dimensional boundary turbulence simulations of a RFX-mod plasma in the presence of voltage biasing
Authors:
M. Giacomin,
N. Vianello,
R. Cavazzana,
S. Molisani,
M. Spolaore,
M. Zuin
Abstract:
Three-dimensional turbulence simulations of a RFX-mod diverted plasma are performed in the presence of a biasing electrode. The simulations show a strong suppression of turbulent transport caused by the induced $\mathbf{E}\times\mathbf{B}$ flow shear, which leads to the formation of an edge transport barrier with a pedestal-like structure, in qualitative agreement with RFX-mod experiments. The str…
▽ More
Three-dimensional turbulence simulations of a RFX-mod diverted plasma are performed in the presence of a biasing electrode. The simulations show a strong suppression of turbulent transport caused by the induced $\mathbf{E}\times\mathbf{B}$ flow shear, which leads to the formation of an edge transport barrier with a pedestal-like structure, in qualitative agreement with RFX-mod experiments. The strong $\mathbf{E}\times\mathbf{B}$ flow shear turbulence suppression with edge voltage biasing is also observed in the proximity of the density limit crossing, suggesting that edge voltage biasing may allow for larger maximum achievable density values. By leveraging the simulation results, the theoretical scaling law of the edge pressure gradient length derived in Giacomin & Ricci (2020) J. Plasma Phys. 86(5) is extended here to account for the $\mathbf{E}\times\mathbf{B}$ flow shear turbulence suppression caused by voltage biasing. The improved theoretical scaling with typical RFX-mod shearing rate values predicts a factor of two increase of the pressure gradient at the separatrix, which is comparable to RFX-mod experiments in the presence of voltage biasing. The implications of the flow shear turbulence suppression due to voltage biasing on the density limit in RFX-mod are also discussed.
△ Less
Submitted 14 February, 2025; v1 submitted 20 January, 2025;
originally announced January 2025.
-
Lessons learned after three years of SPIDER operation and the first MITICA integrated tests
Authors:
D. Marcuzzi,
V. Toigo,
M. Boldrin,
G. Chitarin,
S. Dal Bello,
L. Grando,
A. Luchetta,
R. Pasqualotto,
M. Pavei,
G. Serianni,
L. Zanotto,
R. Agnello,
P. Agostinetti,
M. Agostini,
D. Aprile,
M. Barbisan,
M. Battistella,
G. Berton,
M. Bigi,
M. Brombin,
V. Candela,
V. Candeloro,
A. Canton,
R. Casagrande,
C. Cavallini
, et al. (117 additional authors not shown)
Abstract:
ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedi…
▽ More
ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedicated to developing and characterizing large efficient negative ion sources at relevant parameters in ITER-like conditions: source and accelerator located in the same vacuum where the beam propagates, immunity to electromagnetic interferences of multiple radio-frequency (RF) antennas, avoidance of RF-induced discharges on the outside of the source. Three years of experiments on SPIDER have addressed to the necessary design modifications to enable full performances. The source is presently under a long shut-down phase to incorporate learnings from the experimental campaign. Parallelly, developments on MITICA, the full-scale prototype of the ITER NBI featuring a 1 MV accelerator and ion neutralization, are underway including manufacturing of in-vessel components, while power supplies and auxiliary plants are already under final testing and commissioning. Integration, commissioning and tests of the 1MV power supplies are essential for this first-of-kind system, unparalleled both in research and industry field. The integrated test to confirm 1MV output by combining invertor systems, DC generators and transmission lines extracted errors/accidents in some components. To realize a concrete system for ITER, solutions for the repair and the improvement of the system were developed. Hence, NBTF is emerging as a necessary facility, due to the large gap with existing injectors, effectively dedicated to identify issues and find solutions to enable successful ITER NBI operations in a time bound fashion.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
Measure of negative ion density in a large negative ion source using Langmuir probes
Authors:
Carlo Poggi,
Monica Spolaore,
Marco Barbisan,
Matteo Brombin,
Roberto Cavazzana,
Nicolò Marconato,
Roberto Pasqualotto,
Antonio Pimazzoni,
Emanuele Sartori,
Gianluigi Serianni
Abstract:
Neutral Beam Injectors (NBIs) based on negative ions are the workhorses of future fusion reactors, such as ITER, which they are expected to provide with up to \SI{33}{MW} of power to heat the fusion plasma. The negative hydrogen ions are extracted from a RF plasma, in which a magnetic filter field cools down the electrons reaching the so-called expansion region and allows the formation of negative…
▽ More
Neutral Beam Injectors (NBIs) based on negative ions are the workhorses of future fusion reactors, such as ITER, which they are expected to provide with up to \SI{33}{MW} of power to heat the fusion plasma. The negative hydrogen ions are extracted from a RF plasma, in which a magnetic filter field cools down the electrons reaching the so-called expansion region and allows the formation of negative ions near the apertures in the plasma grid. To further improve the production of negative ions, cesium is usually evaporated inside the source and deposited onto the plasma walls, reducing the work function of the surfaces. This dramatically increases the density of negative hydrogen ions near the surfaces, causing the transition to an electronegative plasma in the vicinity of the plasma grid. This condition can be observed with Langmuir probes, which can then be used to provide a local meaurement of negative ion density in the ion source.
In this paper we use the measurements provided by the Langmuir probe sensors embedded in the plasma grid of SPIDER, the prototype ion source of ITER NBIs, to determine the density of negative ions. A fitting method based on the determination of the collection area of the different plasma species is proposed and adapted to SPIDER experimental condition, taking into account the shape of the probes and the local topology of the magnetic field. The method is then applied to the experimental data, determining the densities of the positive and negative ions and of the electrons during a plasma pulse. Finally, a vertical array of four probes in the plasma grid is used to assess the vertical profile of plasma parameters.
△ Less
Submitted 12 July, 2023; v1 submitted 23 February, 2023;
originally announced February 2023.
-
Negative ion density in the ion source SPIDER in Cs free conditions
Authors:
M. Barbisan,
R. Agnello,
G. Casati,
R. Pasqualotto,
C. Poggi,
E. Sartori,
M. Spolaore,
G. Serianni
Abstract:
The SPIDER experiment, operated at the Neutral Beam Test Facility of Consorzio RFX, Padua, hosts the prototype of the H-/D- ion source for the ITER neutral beam injectors. The maximization of the ion current extracted from the source and the minimization of the amount of co-extracted electrons are among the most relevant targets to accomplish. The Cavity Ring-Down Spectroscopy diagnostic measures…
▽ More
The SPIDER experiment, operated at the Neutral Beam Test Facility of Consorzio RFX, Padua, hosts the prototype of the H-/D- ion source for the ITER neutral beam injectors. The maximization of the ion current extracted from the source and the minimization of the amount of co-extracted electrons are among the most relevant targets to accomplish. The Cavity Ring-Down Spectroscopy diagnostic measures the negative ion density in the source close to the plasma grid (the plasma-facing grid of the ion acceleration system), so to identify the source operational parameters that maximize the amount of negative ions which can be extracted. In this study SPIDER was operated in hydrogen and deuterium in Cs-free conditions, therefore negative ions were mostly produced by reactions in the plasma volume. This work shows how the magnetic filter field and the bias currents, present in SPIDER to limit the amount of co-extracted electrons, affect the density of negative ions available for extraction. The results indicate that the magnetic filter field in front of the acceleration system should be set between about 1.6 mT, condition that maximizes the density of available negative ions, and about 3.2 mT, condition that minimizes the ratio of electron current to ion current. The negative ion density also resulted to be maximized when the plasma grid and its surrounding bias plate was positively biased against the source body with a total current in the range 0 A÷100 A. The paper shows also how much, in Cs-free conditions, the electric fields in the acceleration system can affect the density of negative ions in the source, close to the plasma grid apertures.
△ Less
Submitted 29 August, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Spatiotemporal synchronization of drift waves in a magnetron sputtering plasma
Authors:
E. Martines,
M. Zuin,
R. Cavazzana,
J. Adámek,
V. Antoni,
G. Serianni,
M. Spolaore,
N. Vianello
Abstract:
A feedforward scheme is applied for drift waves control in a magnetized magnetron sputtering plasma. A system of driven electrodes collecting electron current in a limited region of the explored plasma is used to interact with unstable drift waves. Drift waves actually appear as electrostatic modes characterized by discrete wavelengths of the order of few centimeters and frequencies of about 100 k…
▽ More
A feedforward scheme is applied for drift waves control in a magnetized magnetron sputtering plasma. A system of driven electrodes collecting electron current in a limited region of the explored plasma is used to interact with unstable drift waves. Drift waves actually appear as electrostatic modes characterized by discrete wavelengths of the order of few centimeters and frequencies of about 100 kHz. The effect of external quasi-periodic, both in time and space, travelling perturbations is studied. Particular emphasis is given to the role played by the phase relation between the natural and the imposed fluctuations. It is observed that it is possible by means of localized electrodes, collecting currents which are negligible with respect to those flowing in the plasma, to transfer energy to one single mode and to reduce that associated to the others. Due to the weakness of the external action, only partial control has been achieved.
△ Less
Submitted 11 April, 2014;
originally announced April 2014.
-
The plasma boundary in Single Helical Axis RFP plasmas
Authors:
E. Martines,
R. Lorenzini,
B. Momo,
S. Munaretto,
P. Innocente,
M. Spolaore
Abstract:
Single Helical Axis (SHAx) states obtained in high current reversed field pinch (RFP) plasmas display, aside from a dominant mode in the m=1 spectrum, also a dominant m=0 mode, with the same toroidal mode number as the m=1 one. The two modes have a fixed phase relationship. The island chain created by the m=0 mode across the reversal surface gives rise, at shallow reversal of the toroidal field,…
▽ More
Single Helical Axis (SHAx) states obtained in high current reversed field pinch (RFP) plasmas display, aside from a dominant mode in the m=1 spectrum, also a dominant m=0 mode, with the same toroidal mode number as the m=1 one. The two modes have a fixed phase relationship. The island chain created by the m=0 mode across the reversal surface gives rise, at shallow reversal of the toroidal field, to an X-point structure which separates the last closed flux surface from the first wall, creating a divertor-like configuration. The plasma-wall interaction is found to be related to the connection length of the field lines intercepting the wall, which displays a pattern modulated by the dominant mode toroidal periodicity. This configuration, which occurs only for shallow toroidal field reversal, could be exploited to realize an island divertor in analogy to stellarators.
△ Less
Submitted 17 September, 2009; v1 submitted 16 September, 2009;
originally announced September 2009.
-
Resistive g-modes in a reversed field pinch plasma
Authors:
M. Zuin,
S. Spagnolo,
R. Paccagnella,
E. Martines,
R. Cavazzana,
G. Serianni,
M. Spolaore,
N. Vianello
Abstract:
First direct experimental evidence of high frequency, high toroidal mode number (n>20), magnetic fluctuations due to unstable resistive interchange modes (g-modes) resonant in the edge region of a reversed field pinch (RFP) plasma is presented. Experimental characterization of time and space periodicities of the modes is provided by means of highly resolved in-vessel edge and insertable magnetic…
▽ More
First direct experimental evidence of high frequency, high toroidal mode number (n>20), magnetic fluctuations due to unstable resistive interchange modes (g-modes) resonant in the edge region of a reversed field pinch (RFP) plasma is presented. Experimental characterization of time and space periodicities of the modes is provided by means of highly resolved in-vessel edge and insertable magnetic diagnostics. It is found that the spectral mode properties are in good agreement with the predictions of the theoretical linear resistive magnetohydrodynamic stability analysis. A simple model is proposed for the observed saturation levels of the modes.
△ Less
Submitted 11 September, 2009;
originally announced September 2009.
-
Drift-Alfven vortex structures in the edge region of a fusion relevant plasma
Authors:
N. Vianello,
M. Spolaore,
E. Martines,
R. Cavazzana,
G. Serianni,
M. Zuin,
E. Spada,
V. Antoni
Abstract:
Edge turbulent structures are commonly observed in fusion devices and are generally believed to be responsible for confinement degradation. Among their origin Drift-Alfven turbulence is one of the most commonly suggested. Drift-Alfven paradigm allows the existence of localized vortex-like structures observed also in various systems. Here we present the evidence of the presence of drift-Alfvén vo…
▽ More
Edge turbulent structures are commonly observed in fusion devices and are generally believed to be responsible for confinement degradation. Among their origin Drift-Alfven turbulence is one of the most commonly suggested. Drift-Alfven paradigm allows the existence of localized vortex-like structures observed also in various systems. Here we present the evidence of the presence of drift-Alfvén vortices in the edge region of RFX-Mod RFP device, showing how these structures are responsible for electromagnetic turbulence at the edge and its intermittent nature.
△ Less
Submitted 11 June, 2009; v1 submitted 30 April, 2009;
originally announced April 2009.
-
Statistical features of edge turbulence in RFX-mod from Gas Puffing Imaging
Authors:
F. Sattin,
P. Scarin,
M. Agostini,
R. Cavazzana,
G. Serianni,
M. Spolaore,
N. Vianello
Abstract:
Plasma density fluctuations in the edge plasma of the RFX-mod device are measured through the Gas Puffing Imaging Diagnostics. Statistical features of the signal are quantified in terms of the Probability Distribution Function (PDF), and computed for several kinds of discharges. The PDFs from discharges without particular control methods are found to be adequately described by a Gamma function,…
▽ More
Plasma density fluctuations in the edge plasma of the RFX-mod device are measured through the Gas Puffing Imaging Diagnostics. Statistical features of the signal are quantified in terms of the Probability Distribution Function (PDF), and computed for several kinds of discharges. The PDFs from discharges without particular control methods are found to be adequately described by a Gamma function, consistently with the recent results by Graves et al [J.P. Graves, et al, Plasma Phys. Control. Fusion 47, L1 (2005)]. On the other hand, pulses with external methods for plasma control feature modified PDFs. A first empirical analysis suggests that they may be interpolated through a linear combination of simple functions. An inspection of the literature shows that this kind of PDFs is common to other devices as well, and has been suggested to be due to the simultaneous presence of different mechanisms driving respectively coherent bursts and gaussian background turbulence. An attempt is made to relate differences in the PDFs to plasma conditions such as the local shift of the plasma column. A simple phenomenological model to interpret the nature of the PDF and assign a meaning to its parameters is also developed.
△ Less
Submitted 30 June, 2006;
originally announced June 2006.
