-
The conceptual design of 100-kA pulsed magnetic field generator for magnetized high-energy-density plasma experiments
Authors:
R. V. Shapovalov,
R. B. Spielman,
G. Brent,
P. -A. Gourdain
Abstract:
This paper presents the conceptual design of a high-voltage pulser intended to generate 30-T magnetic fields for magneto-inertial fusion experiments at the OMEGA facility. The pulser uses a custom capacitor bank and two externally triggered spark gaps to drive a multi-turn coil. This new high-voltage pulser is capable of storing 10 times more energy than the previous system, using a higher charge…
▽ More
This paper presents the conceptual design of a high-voltage pulser intended to generate 30-T magnetic fields for magneto-inertial fusion experiments at the OMEGA facility. The pulser uses a custom capacitor bank and two externally triggered spark gaps to drive a multi-turn coil. This new high-voltage pulser is capable of storing 10 times more energy than the previous system, using a higher charge voltage (from 20 to 30 kV) and a larger capacitance (from 1 μF to 5 μF). Circuit simulations show that this pulser can deliver 100 kA into a 60-nH, 14-mΩ coil with a rise time of 1 μs. For a coil with 2 turns with an average coil diameter of 7.8 mm, this current translates into a 32-T peak magnetic field at coil center. This is a factor of three increase in the peak magnetic field compared to the present generator magnetic field capabilities.
△ Less
Submitted 10 September, 2018;
originally announced September 2018.
-
HADES: a High Amperage Driver for Extreme States
Authors:
P. -A. Gourdain,
M. Evans,
B. Foy,
D. Mager,
R. McBride,
R. Spielman
Abstract:
Linear transformer drivers (LTD) allow to greatly reduce the size of pulsed-power drivers while increasing their efficiency and repetition rate. However, limitations on the capacitors voltage and current exist, mostly driven by technological imperatives. As a result, LTD required to be connected in series and in parallel to form a practical pulsed-power generator. The High Amperage Driver for Extr…
▽ More
Linear transformer drivers (LTD) allow to greatly reduce the size of pulsed-power drivers while increasing their efficiency and repetition rate. However, limitations on the capacitors voltage and current exist, mostly driven by technological imperatives. As a result, LTD required to be connected in series and in parallel to form a practical pulsed-power generator. The High Amperage Driver for Extreme States (HADES) proposed here can generate 250 GW of power, i.e. a 1 MA on current with a rise time of 150 ns into a 20nH load. The key feature of the driver is its size. The machine footprint is less than 5m2 and its height is less than 1.6m. This reduction in footprint, compared to other 1 MA LTD based-systems, comes from a compact transmission line geometry which allow to connect LTDs is series and in parallel efficiently. This paper summarizes this design and describes HADES operation and maintenance.
△ Less
Submitted 11 May, 2017;
originally announced May 2017.
-
A New Linear Inductive Voltage Adder Driver for the Saturn Accelerator
Authors:
M. G. Mazarakis,
R. B. Spielman,
K. W. Struve,
F. W. Long
Abstract:
Saturn is a dual-purpose accelerator. It can be operated as a large-area flash x-ray source for simulation testing or as a Z-pinch driver especially for K-line x-ray production. In the first mode, the accelerator is fitted with three concentric-ring 2-MV electron diodes, while in the Z-pinch mode the current of all the modules is combined via a post-hole convolute arrangement and driven through…
▽ More
Saturn is a dual-purpose accelerator. It can be operated as a large-area flash x-ray source for simulation testing or as a Z-pinch driver especially for K-line x-ray production. In the first mode, the accelerator is fitted with three concentric-ring 2-MV electron diodes, while in the Z-pinch mode the current of all the modules is combined via a post-hole convolute arrangement and driven through a cylindrical array of very fine wires. We present here a point design for a new Saturn class driver based on a number of linear inductive voltage adders connected in parallel. A technology recently implemented at the Institute of High Current Electronics in Tomsk (Russia) is being utilized[1].
In the present design we eliminate Marx generators and pulse-forming networks. Each inductive voltage adder cavity is directly fed by a number of fast 100-kV small-size capacitors arranged in a circular array around each accelerating gap. The number of capacitors connected in parallel to each cavity defines the total maximum current. By selecting low inductance switches, voltage pulses as short as 30-50-ns FWHM can be directly achieved.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.
