Showing 1–6 of 6 results for author: Soti, A K

Vortex-induced Vibrations of a Confined Circular Cylinder for Efficient Flow Power Extraction

Authors: Atul K. Soti, Ashoke De

Abstract: A simple method to increase the flow power extraction efficiency of a circular cylinder, undergoing vortex-induced vibration (VIV), by confining it between two parallel plates is proposed. A two-dimensional numerical study was performed on VIV of a circular cylinder inside a parallel plate channel of height H at Reynolds number 150 to quantify the improvement. The cylinder is elastically mounted w… ▽ More A simple method to increase the flow power extraction efficiency of a circular cylinder, undergoing vortex-induced vibration (VIV), by confining it between two parallel plates is proposed. A two-dimensional numerical study was performed on VIV of a circular cylinder inside a parallel plate channel of height H at Reynolds number 150 to quantify the improvement. The cylinder is elastically mounted with a spring such that it is only free to vibrate in the direction transverse to the channel flow and has a fixed mass ratio (m*) of 10. The energy extraction process is modelled as a damper, with spatially constant damping ration ((), attached to the cylinder. The simulations are performed by varying the reduced velocity for a set of fixed mass-damping (α = m*() values ranging between 0 to 1. The blockage ratio (b = D/H) is varied from 0.25 to 0.5 by changing the channel height. The quasi-periodic initial branch found for the unconfined cylinder shrinks with the increasing blockage. The extracted power is found to increase rapidly with the blockage. For maximum blockage (b = 0.2), the maximum flow power extracted by the cylinder is an order of magnitude larger as compared to what it would extract in an open domain with free stream velocity equal to the channel mean velocity. The optimal mass-damping (αc ) for extracting maximum power is found to lie between 0.2 to 0.3. An expression is derived to predict the maximum extracted power from the undamped response of a confined/unconfined cylinder. With the assumption αc = 0.25, the derived expression can predict the maximum power extraction within +-20% of the actual values obtained from present and previous numerical and experimental studies. △ Less

Submitted 27 January, 2021; originally announced January 2021.

Journal ref: Phys. Fluids2, 2020

Computational Modeling and Analysis of Flow-induced Vibration of an Elastic Splitter Plate Using a Sharp-interface Immersed Boundary Method

Authors: Anup Kundu, Atul K. Soti, Hemanshul Garg, Rajneesh Bhardwaj, Mark C. Thompson

Abstract: We present the development and benchmarking of an in-house fluid-structure interaction (FSI) solver. An implicit partitioned approach is utilized to couple a sharp-interface immersed boundary (IB) method based flow solver and a finite-element method based structural solver. In the present work, the coupling is accelerated using a dynamic under-relaxation scheme. The revised coupling is around two… ▽ More We present the development and benchmarking of an in-house fluid-structure interaction (FSI) solver. An implicit partitioned approach is utilized to couple a sharp-interface immersed boundary (IB) method based flow solver and a finite-element method based structural solver. In the present work, the coupling is accelerated using a dynamic under-relaxation scheme. The revised coupling is around two to three times faster and numerically stable, as compared to the one that uses a constant under-relaxation parameter. The solver is validated against two FSI benchmarks in which a thin, finite thickness, elastic splitter plate is attached to the lee side of a circular or square rigid cylinder, subjected to laminar flow. In these two-dimensional benchmarks, the flow induces a wave-like deformation in the plate, and it attains a periodic self-sustained oscillation. We employ the FSI solver to analyze the flow-induced vibration (FIV) of the plate in a uniform laminar free-stream flow for a wide range of mass ratio and bending stiffness at Reynolds number ($Re$) of 100, based on the diameter of the cylinder. At the given $Re$, two-dimensional numerical simulations show that the FIV of the plate effectively depends only on the mass ratio and bending stiffness. The largest displacement of the plate vibration is found to occur in the lock-in region, where the vortex shedding frequency of the coupled fluid-structure system is close to the natural frequency of the splitter plate. We briefly discuss wake structures and phase plots for different cases of mass ratio and bending stiffness. △ Less

Submitted 6 May, 2020; originally announced May 2020.

Harnessing Electrical Power from Vortex-Induced Vibration of a Circular Cylinder

Authors: Atul Kumar Soti, Mark C. Thompson, John Sheridan, Rajneesh Bhardwaj

Abstract: The generation of electrical power from Vortex-Induced Vibration (VIV) of a cylinder is investigated numerically. The cylinder is free to oscillate in the direction transverse to the incoming flow. The cylinder is attached to a magnet that can move along the axis of a coil made from conducting wire. The magnet and the coil together constitute a basic electrical generator. When the cylinder undergo… ▽ More The generation of electrical power from Vortex-Induced Vibration (VIV) of a cylinder is investigated numerically. The cylinder is free to oscillate in the direction transverse to the incoming flow. The cylinder is attached to a magnet that can move along the axis of a coil made from conducting wire. The magnet and the coil together constitute a basic electrical generator. When the cylinder undergoes VIV, the motion of the magnet creates a voltage across the coil, which is connected to a resistive load. By Lenz's law, induced current in the coil applies a retarding force to the magnet. Effectively, the electrical generator applies a damping force on the cylinder with a spatially varying damping coefficient. For the initial investigation reported here, the Reynolds number is restricted to Re < 200, so that the flow is laminar and two-dimensional (2D). The incompressible 2D Navier-Stokes equations are solved using an extensively validated spectral-element based solver. The effects of the electromagnetic (EM) damping constant xi_m, coil dimensions (radius a, length L), and mass ratio on the electrical power extracted are quantified. It is found that there is an optimal value of xi_m (xi_opt) at which maximum electrical power is generated. As the radius or length of the coil is increased, the value of xi_opt is observed to increase. Although the maximum average power remains the same, a larger coil radius or length results in a more robust system in the sense that a relatively large amount of power can be extracted when xi_m is far from xi_opt, unlike the constant damping ratio case. The average power output is also a function of Reynolds number, primarily through the increased maximum oscillation amplitude that occurs with increased Reynolds number at least within the laminar range, although the general qualitative findings seem likely to carry across to high Reynolds number VIV. △ Less

Submitted 5 December, 2017; originally announced December 2017.

Journal ref: Journal of Fluids and Structures, Volume 70, April 2017, Pages 360-373

The Response of an Elastic Splitter Plate Attached to a Cylinder to Laminar Pulsatile Flow

Authors: Anup Kundu, Atul K. Soti, Rajneesh Bhardwaj, Mark C. Thompson

Abstract: The flow-induced deformation of a thin, elastic splitter plate attached to the rear of a circular cylinder and subjected to laminar pulsatile inflow is investigated. The cylinder and elastic splitter plate are contained within a narrow channel and the Reynolds number is mostly restricted to Re = 100, primarily covering the two-dimensional flow regime. An in-house fluid-structure interaction code i… ▽ More The flow-induced deformation of a thin, elastic splitter plate attached to the rear of a circular cylinder and subjected to laminar pulsatile inflow is investigated. The cylinder and elastic splitter plate are contained within a narrow channel and the Reynolds number is mostly restricted to Re = 100, primarily covering the two-dimensional flow regime. An in-house fluid-structure interaction code is employed for simulations, which couples a sharp-interface immersed boundary method for the fluid dynamics with a finite-element method to treat the structural dynamics. The structural solver is implicitly (two-way) coupled with the flow solver using a partitioned approach. This implicit coupling ensures numerical stability at low structure-fluid density ratios. A power spectrum analysis of the time-varying plate displacement shows that the plate oscillates at more than a single frequency for pulsatile inflow, compared to a single frequency observed for steady inflow. The multiple frequencies obtained for the former case can be explained by beating between the applied and plate oscillatory signals. The plate attains a self-sustained time-periodic oscillation with a plateau amplitude in the case of steady flow, while the superimposition of pulsatile inflow with induced plate oscillation affects the plateau amplitude. Lock-in of the plate oscillation with the pulsatile inflow occurs at a forcing frequency that is twice of the plate natural frequency in a particular mode and this mode depends on the plate length. The plate displacement as well as pressure drag increases at the lock-in condition. The percentage change in the maximum plate displacement, and skin-friction and pressure drag coefficients on the plate, due to pulsatile inflow is quantified. The non-linear dynamics of the plate and its coupling with the pulsatile flow are briefly discussed. △ Less

Submitted 9 November, 2016; originally announced November 2016.

Numerical study of Heat Transfer Enhancement by Deformable Twin Plates in Laminar Heated Channel flow

Authors: Rakshitha U. Joshi, Atul K. Soti, Rajneesh Bhardwaj

Abstract: Fluid-structure interaction (FSI) of thin flexible fins coupled with convective heat transfer has applications in energy harvesting and in understanding functioning of several biological systems. We numerically investigate FSI of the thin flexible fins involving large-scale flow-induced deformation as a potential heat transfer enhancement technique. An in-house, strongly-coupled fluid-structure in… ▽ More Fluid-structure interaction (FSI) of thin flexible fins coupled with convective heat transfer has applications in energy harvesting and in understanding functioning of several biological systems. We numerically investigate FSI of the thin flexible fins involving large-scale flow-induced deformation as a potential heat transfer enhancement technique. An in-house, strongly-coupled fluid-structure interaction (FSI) solver is employed in which flow and structure solvers are based on sharp-interface immersed boundary and finite element method, respectively. We consider twin flexible fins in a heated channel with laminar pulsating cross flow. The vortex ring past the fin sweep higher sources of vorticity generated on the channel walls out into the downstream - promoting the mixing of the fluid. The moving fin assists in convective mixing, augmenting convection in bulk and at the walls; and thereby reducing thermal boundary layer thickness and improving heat transfer at the channel walls. The thermal augmentation is quantified in term of instantaneous Nusselt number at the wall. Results are presented for two limiting cases of thermal conductivity of the fin - an insulated fin and a highly conductive fin. We discuss feasibility of flexible fins and effect of flow cycle-to-cycle variation on the Nusselt number. Finally, we investigate the effect of important problem parameters - Young's Modulus, flow frequency and Prandtl number - on the thermal augmentation. △ Less

Submitted 16 November, 2016; v1 submitted 13 September, 2015; originally announced September 2015.

Comments: arXiv admin note: text overlap with arXiv:1501.01807

Journal ref: Computational Thermal Sciences, Vol. 7, pp 1-10, 2015

Flow-Induced Deformation of a Flexible Thin Structure as Manifestation of Heat Transfer Enhancement

Authors: Atul Kumar Soti, Rajneesh Bhardwaj, John Sheridan

Abstract: Flow-induced deformation of thin structures coupled with convective heat transfer has potential applications in energy harvesting and is important for understanding functioning of several biological systems. We numerically demonstrate large-scale flow-induced deformation as an effective passive heat transfer enhancement technique. An in-house, strongly-coupled fluid-structure interaction (FSI) sol… ▽ More Flow-induced deformation of thin structures coupled with convective heat transfer has potential applications in energy harvesting and is important for understanding functioning of several biological systems. We numerically demonstrate large-scale flow-induced deformation as an effective passive heat transfer enhancement technique. An in-house, strongly-coupled fluid-structure interaction (FSI) solver is employed in which flow and structure solvers are based on sharp-interface immersed boundary and finite element method, respectively. In the present work, we validate convective heat transfer module of the in-house FSI solver against several benchmark examples of conduction and convective heat transfer including moving structure boundaries. The thermal augmentation is investigated as well as quantified for the flow-induced deformation of an elastic thin plate attached to lee side of a rigid cylinder in a heated channel laminar flow. We show that the wake vortices past the plate sweep higher sources of vorticity generated on the channel walls out into the high velocity regions, promoting the mixing of the fluid. The self-sustained motion of the plate assists in convective mixing, augmenting convection in bulk and near the walls, and thereby reducing thermal boundary layer thickness as well as improving Nusselt number at the channel walls. We quantify the thermal improvement with respect to channel flow without any bluff body and analyze the role of Reynolds number, Prandtl number and material properties of the plate in the thermal augmentation. △ Less

Submitted 8 January, 2015; originally announced January 2015.