Showing 1–50 of 80 results for author: Solinas, P

Resource reduction for variational quantum algorithms by non-demolition measurements

Authors: Dario Melegari, Rabia Abdul Razaq, Giovanni Minuto, Paolo Solinas

Abstract: We present a comparative study of two implementations of a variational quantum algorithm aimed at minimizing the energy of a complex quantum system. In one implementation, we extract the information of the energy gradient by projective measurements. In the second implementation, called the Non-Demolition approach, the gradient information is stored in a quantum detector, which is eventually measur… ▽ More We present a comparative study of two implementations of a variational quantum algorithm aimed at minimizing the energy of a complex quantum system. In one implementation, we extract the information of the energy gradient by projective measurements. In the second implementation, called the Non-Demolition approach, the gradient information is stored in a quantum detector, which is eventually measured. As prototypical examples, we study the energy minimization of the Lithium-based molecules and then extend the analysis systems with increased complexity. We find that, while both approaches are able to identify the energy minimum, the Non-Demolition approach has a clear advantage in terms of the overall computational resources needed. This advantage increases linearly with the complexity of the quantum system, making the Non-Demolition approach the ideal candidate to implement such variational quantum algorithms. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: 8 pages, 4 figures

Quantum simulations of macrorealism violation via the QNDM protocol

Authors: D. Melegari, M. Cardi, P. Solinas

Abstract: The Leggett-Garg inequalities have been proposed to identify the quantum behaviour of a system; specifically, the violation of macrorealism. They are usually implemented by performing two sequential measurements on quantum systems, calculating the correlators of such measurements and then combining them arriving at Leggett-Garg inequalities. However, this approach only provides sufficient conditio… ▽ More The Leggett-Garg inequalities have been proposed to identify the quantum behaviour of a system; specifically, the violation of macrorealism. They are usually implemented by performing two sequential measurements on quantum systems, calculating the correlators of such measurements and then combining them arriving at Leggett-Garg inequalities. However, this approach only provides sufficient conditions for the violation of macrorealism. Recently, it was proposed an alternative approach that uses non-demolition measurements and gives both a necessary and sufficient condition for the violation of macrorealism. By storing the information in a quantum detector, it is possible to construct a quasi-probability distribution whose negative regions unequivocally identify the quantum behaviour of the system. Here, we perform a detailed comparison between these two approaches. The use of the IBM quantum simulators allows us to evaluate the performance in real-case situations and to include both the statistical and environmental noise. We find that the non-demolition approach is not only able to always identify the quantum features but it requires fewer resources than the standard Leggett-Garg inequalities. In addition, while the efficiency of the latter is strongly affected by the presence of the noise, the non-demolition approach results incredibly robust and its efficiency remains unchanged by the noise. These results make the non-demolition approach a viable alternative to the Leggett-Garg inequalities to identify the violation of macrorealism. △ Less

Submitted 24 February, 2025; originally announced February 2025.

Comments: 9 pages, 7 figures

Quantum Non-Demolition Measurements and Leggett-Garg inequality

Authors: Paolo Solinas, Stefano Gherardini

Abstract: Quantum non-demolition measurements define a non-invasive protocol to extract information from a quantum system that we aim to monitor. They exploit an additional quantum system that is sequentially coupled to the system. Eventually, by measuring the additional system, we can extract information about temporal correlations developed by the quantum system dynamics with respect to a given observable… ▽ More Quantum non-demolition measurements define a non-invasive protocol to extract information from a quantum system that we aim to monitor. They exploit an additional quantum system that is sequentially coupled to the system. Eventually, by measuring the additional system, we can extract information about temporal correlations developed by the quantum system dynamics with respect to a given observable. This protocol leads to a quasi-probability distribution for the measured observable outcomes, which can be negative. We prove that the presence of these negative regions is a necessary and sufficient condition for the violation of macrorealism. This is a much stronger condition than the violation of the Leggett-Garg inequalities commonly used for the same task. Indeed, we show that there are situations in which Leggett-Garg inequalities are satisfied even if the macrorealism condition is violated. As a consequence, the quantum non-demolition protocol is a privileged tool to identify with certainty the quantum behavior of a system. As such, it has a vast number of applications to different fields from the certification of quantumness to the study of the quantum-to-classical transition. △ Less

Submitted 31 July, 2024; originally announced August 2024.

Comments: 10 pages, 2 figures. Comments and feedback are welcome

Journal ref: Phys. Rev. A 111 (5), 052217 (2025)

On the Measurement of the Unruh Effect Through Extended Quantum Thermometers

Authors: M. Cardi, P. Solinas, N. Zanghì

Abstract: The Unruh effect, predicting a thermal reservoir for accelerating systems, calls for a more refined understanding of measurement processes involving quantum systems as thermometers. Conventional models fail to account for the inherent spatial extent of the thermometer, neglecting the complexities associated with accelerated extended quantum systems. Our work builds upon the seminal work of Bell, H… ▽ More The Unruh effect, predicting a thermal reservoir for accelerating systems, calls for a more refined understanding of measurement processes involving quantum systems as thermometers. Conventional models fail to account for the inherent spatial extent of the thermometer, neglecting the complexities associated with accelerated extended quantum systems. Our work builds upon the seminal work of Bell, Hughes, and Leinaas. We propose a refined thermometer model incorporating a spin-1/2 particle where the spin acts as a temperature indicator. This refined model demonstrates the ability to effectively measure the temperature under specific, realistic conditions, providing a unique value that essentially averages the local Unruh temperatures throughout the extended quantum system acting as the thermometer. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Comments: 9+3 pages, 2 figures

Journal ref: Phys. Rev. D 111,(2025) 036031

A Novel Approach to Reduce Derivative Costs in Variational Quantum Algorithms

Authors: Giovanni Minuto, Dario Melegari, Simone Caletti, Paolo Solinas

Abstract: We present a detailed numerical study of an alternative approach, named Quantum Non-Demolition Measurement (QNDM), to efficiently estimate the gradients or the Hessians of a quantum observable. This is a key step and a resource-demanding task when we want to minimize the cost function associated with a quantum observable. In our detailed analysis, we account for all the resources needed to impleme… ▽ More We present a detailed numerical study of an alternative approach, named Quantum Non-Demolition Measurement (QNDM), to efficiently estimate the gradients or the Hessians of a quantum observable. This is a key step and a resource-demanding task when we want to minimize the cost function associated with a quantum observable. In our detailed analysis, we account for all the resources needed to implement the QNDM approach with a fixed accuracy and compare them to the current state-of-the-art method. We find that the QNDM approach is more efficient, i.e. it needs fewer resources, in evaluating the derivatives of a cost function. These advantages are already clear in small dimensional systems and are likely to increase for practical implementations and more realistic situations. A significant outcome of our study is the implementation of the QNDM method in Python, provided in the supplementary material. Given that most Variational Quantum Algorithms can be formulated within this framework, our results can have significant implications in quantum optimization algorithms and make the QNDM approach a valuable alternative to implement Variational Quantum Algorithms on near-term quantum computers. △ Less

Submitted 1 April, 2025; v1 submitted 2 April, 2024; originally announced April 2024.

Comments: 12 pages, 6 figures

Quantum gradient evaluation through quantum non-demolition measurements

Authors: Paolo Solinas, Simone Caletti, Giovanni Minuto

Abstract: We discuss a Quantum Non-Demolition Measurement (QNDM) protocol to estimate the derivatives of a cost function with a quantum computer. %This is a key step for the implementation of variational quantum circuits. The cost function, which is supposed to be classically hard to evaluate, is associated with the average value of a quantum operator. Then a quantum computer is used to efficiently extract… ▽ More We discuss a Quantum Non-Demolition Measurement (QNDM) protocol to estimate the derivatives of a cost function with a quantum computer. %This is a key step for the implementation of variational quantum circuits. The cost function, which is supposed to be classically hard to evaluate, is associated with the average value of a quantum operator. Then a quantum computer is used to efficiently extract information about the function and its derivative by evolving the system with a so-called variational quantum circuit. To this aim, we propose to use a quantum detector that allows us to directly estimate the derivatives of an observable, i.e., the derivative of the cost function. With respect to the standard direct measurement approach, this leads to a reduction of the number of circuit iterations needed to run the variational quantum circuits. The advantage increases if we want to estimate the higher-order derivatives. We also show that the presented approach can lead to a further advantage in terms of the number of total logical gates needed to run the variational quantum circuits. These results make the QNDM a valuable alternative to implementing the variational quantum circuits. △ Less

Submitted 27 March, 2023; v1 submitted 17 January, 2023; originally announced January 2023.

Inductive Superconducting Quantum Interference Proximity Transistor: the L-SQUIPT

Authors: F. Paolucci, P. Solinas, F. Giazotto

Abstract: The design for an inductive superconducting quantum interference proximity transistor with enhanced performance, the L-SQUIPT, is presented and analyzed. The interferometer is based on a double-loop structure, where each ring comprises a superconductor-normal metal-superconductor mesoscopic Josephson weak-link and the read-out electrode is implemented in the form of a superconducting tunnel probe.… ▽ More The design for an inductive superconducting quantum interference proximity transistor with enhanced performance, the L-SQUIPT, is presented and analyzed. The interferometer is based on a double-loop structure, where each ring comprises a superconductor-normal metal-superconductor mesoscopic Josephson weak-link and the read-out electrode is implemented in the form of a superconducting tunnel probe. Our design allows both to improve the coupling of the transistor to the external magnetic field and to increase the characteristic magnetic flux transfer functions, thereby leading to an improved ultrasensitive quantum limited magnetometer. The L-SQUIPT behavior is analyzed in both the dissipative and the dissipationless Josephson-like operation modes, in the dissipative or in the dissipationless Josephson-like operation mode in the latter case by exploiting both an inductive and a dispersive readout scheme. The improved performance makes the L-SQUIPT promising for magnetic field detection as well as for specific applications in quantum technology, where a responsive dispersive magnetometry at milliKelvin temperatures is required. △ Less

Submitted 8 March, 2022; originally announced March 2022.

Comments: 11 pages, 8 figures

Journal ref: Phys. Rev. Applied 18, 054042 (2022)

Destroying superconductivity in thin films with an electric field

Authors: Andrea Amoretti, Daniel K. Brattan, Nicodemo Magnoli, Luca Martinoia, Ioannis Matthaiakakis, Paolo Solinas

Abstract: In this paper we use a Ginzburg-Landau approach to show that a suitably strong electric field can drive a phase transition from a superconductor to a normal metal. The transition is induced by taking into account corrections to the permittivity due to the superconductive gap and persists even when screening effects are considered. We test the model against recent experimental observations in which… ▽ More In this paper we use a Ginzburg-Landau approach to show that a suitably strong electric field can drive a phase transition from a superconductor to a normal metal. The transition is induced by taking into account corrections to the permittivity due to the superconductive gap and persists even when screening effects are considered. We test the model against recent experimental observations in which a strong electric field has been observed to control the supercurrent in superconducting thin films. We find excellent agreement with the experimental data and are able to explain several observed features. We additionally suggest a way to test our theoretical proposal via superconductor-superconductor electron tunneling. △ Less

Submitted 23 September, 2022; v1 submitted 1 February, 2022; originally announced February 2022.

Comments: 5+5 pages, 13 figs; version published in Physical Review Research

Journal ref: Phys. Rev. Research 4, 033211 (2022)

Quasi-probabilities of work and heat in an open quantum system

Authors: Paolo Solinas, Mirko Amico, Nino N. Zanghì

Abstract: We discuss an approach to determine averages of the work, dissipated heat and variation of internal energy of an open quantum system driven by an external classical field. These quantities are measured by coupling the quantum system to a quantum detector at different times. This approach allows us to preserve the full quantum features of the evolution. From the measured phase, we are able to obtai… ▽ More We discuss an approach to determine averages of the work, dissipated heat and variation of internal energy of an open quantum system driven by an external classical field. These quantities are measured by coupling the quantum system to a quantum detector at different times. This approach allows us to preserve the full quantum features of the evolution. From the measured phase, we are able to obtain a quasi-characteristic function and a quasi-probability density function for the corresponding observables. Despite the fact that these quasi-probability density functions are not the results of direct measurements, they reproduce the expected value of the physical quantities. Analogously to the Wigner function, the negative regions of these quasi-probability density functions are directly related to pure quantum processes which are not interpretable in classical terms. We use this feature to show that in the limit of strong dissipation, the quantum features vanish and interpret this as the emergence of the classical limit of the energy exchange process. Our analysis explains and confirms the behavior observed in recent experiments performed on IBMQ devices [1]. The possibility to discriminate between classical and quantum features makes the proposed approach an excellent tool to determine if, and in which conditions, quantum effects can be exploited to increase the efficiency in an energy exchange process at the quantum level. △ Less

Submitted 12 October, 2021; originally announced October 2021.

Comments: 10 pages

Measurement of work and heat in the classical and quantum regimes

Authors: Paolo Solinas, Mirko Amico, Nino Zanghì

Abstract: Despite the increasing interest, the research field which studies the concepts of work and heat at quantum level has suffered from two main drawbacks: first, the difficulty to properly define and measure the work, heat and internal energy variation in a quantum system and, second, the lack of experiments. Here, we report a full characterization of the dissipated heat, work and internal energy vari… ▽ More Despite the increasing interest, the research field which studies the concepts of work and heat at quantum level has suffered from two main drawbacks: first, the difficulty to properly define and measure the work, heat and internal energy variation in a quantum system and, second, the lack of experiments. Here, we report a full characterization of the dissipated heat, work and internal energy variation in a two-level quantum system interacting with an engineered environment. We use the IBMQ quantum computer to implement the driven system's dynamics in a dissipative environment. The experimental data allow us to construct quasi-probability distribution functions from which we recover the correct averages of work, heat and internal energy variation in the dissipative processes. Interestingly, by increasing the environment coupling strength, we observe a reduction of the pure quantum features of the energy exchange processes that we interpret as the emergence of the classical limit. This makes the present approach a privileged tool to study, understand and exploit quantum effects in energy exchanges. △ Less

Submitted 2 July, 2021; v1 submitted 2 February, 2021; originally announced February 2021.

Comments: 11 pages, 5 figures

Journal ref: Phys. Rev. A 103, 060202 (2021)

Sauter-Schwinger effect in a Bardeen-Cooper-Schrieffer superconductor

Authors: Paolo Solinas, Andrea Amoretti, Francesco Giazotto

Abstract: From the sixties a deep and surprising connection has followed the development of superconductivity and quantum field theory. The Anderson-Higgs mechanism and the similarities between the Dirac and Bogoliubov-de Gennes equations are the most intriguing examples. In this last analogy, the massive Dirac particle is identified with a quasiparticle excitation and the fermion mass energy with the super… ▽ More From the sixties a deep and surprising connection has followed the development of superconductivity and quantum field theory. The Anderson-Higgs mechanism and the similarities between the Dirac and Bogoliubov-de Gennes equations are the most intriguing examples. In this last analogy, the massive Dirac particle is identified with a quasiparticle excitation and the fermion mass energy with the superconducting gap energy. Here we follow further this parallelism and show that it predicts an outstanding phenomenon: the superconducting Schwinger effect (SSE). As in the quantum electrodynamics Schwinger effect, where an electron-positron couple is created from the vacuum by an intense electric field, we show that an electrostatic field can generate two coherent excitations from the superconducting ground-state condensate. Differently from the dissipative thermal excitation, these form a new macroscopically coherent and dissipationless state. We discuss how the superconducting state is weakened by the creation of this kind of excitations. In addition to shed a different light and suggest a method for the experimental verification of the Schwinger effect, our results pave the way to the understanding and exploitation of the interaction between superconductors and electric fields. △ Less

Submitted 21 March, 2021; v1 submitted 16 July, 2020; originally announced July 2020.

Comments: 12 pages, 3 figures

Journal ref: Phys. Rev. Lett. 126, 117001 (2021)

Multi-sensory Integration in a Quantum-Like Robot Perception Model

Authors: Davide Lanza, Paolo Solinas, Fulvio Mastrogiovanni

Abstract: Formalisms inspired by Quantum theory have been used in Cognitive Science for decades. Indeed, Quantum-Like (QL) approaches provide descriptive features that are inherently suitable for perception, cognition, and decision processing. A preliminary study on the feasibility of a QL robot perception model has been carried out for a robot with limited sensing capabilities. In this paper, we generalize… ▽ More Formalisms inspired by Quantum theory have been used in Cognitive Science for decades. Indeed, Quantum-Like (QL) approaches provide descriptive features that are inherently suitable for perception, cognition, and decision processing. A preliminary study on the feasibility of a QL robot perception model has been carried out for a robot with limited sensing capabilities. In this paper, we generalize such a model for multi-sensory inputs, creating a multidimensional world representation directly based on sensor readings. Given a 3-dimensional case study, we highlight how this model provides a compact and elegant representation, embodying features that are extremely useful for modeling uncertainty and decision. Moreover, the model enables to naturally define query operators to inspect any world state, which answers quantifies the robot's degree of belief on that state. △ Less

Submitted 29 June, 2020; originally announced June 2020.

Comments: Paper submitted to the 17th International Symposium on Experimental Robotics, Malta, Nov. 9-12, 2020

A Preliminary Study for a Quantum-like Robot Perception Model

Authors: Davide Lanza, Paolo Solinas, Fulvio Mastrogiovanni

Abstract: Formalisms based on quantum theory have been used in Cognitive Science for decades due to their descriptive features. A quantum-like (QL) approach provides descriptive features such as state superposition and probabilistic interference behavior. Moreover, quantum systems dynamics have been found isomorphic to cognitive or biological systems dynamics. The objective of this paper is to study the fea… ▽ More Formalisms based on quantum theory have been used in Cognitive Science for decades due to their descriptive features. A quantum-like (QL) approach provides descriptive features such as state superposition and probabilistic interference behavior. Moreover, quantum systems dynamics have been found isomorphic to cognitive or biological systems dynamics. The objective of this paper is to study the feasibility of a QL perception model for a robot with limited sensing capabilities. We introduce a case study, we highlight its limitations, and we investigate and analyze actual robot behaviors through simulations, while actual implementations based on quantum devices encounter errors for unbalanced situations. In order to investigate QL models for robot behavior, and to study the advantages leveraged by QL approaches for robot knowledge representation and processing, we argue that it is preferable to proceed with simulation-oriented techniques rather than actual realizations on quantum backends. △ Less

Submitted 4 June, 2020; originally announced June 2020.

Comments: Paper submitted to 29th IEEE International Conference on Robot & Human Interactive Communication (RO-MAN), 2020, Naples, Italy

Field-Effect Control of Metallic Superconducting Systems

Authors: Federico Paolucci, Giorgio De Simoni, Paolo Solinas, Elia Strambini, Claudio Puglia, Nadia Ligato, Francesco Giazotto

Abstract: Despite metals are believed to be insensitive to field-effect and conventional Bardeen-Cooper-Schrieffer (BCS) theories predict the electric field to be ineffective on conventional superconductors, a number of gating experiments showed the possibility of modulating the conductivity of metallic thin films and the critical temperature of conventional superconductors. All these experimental features… ▽ More Despite metals are believed to be insensitive to field-effect and conventional Bardeen-Cooper-Schrieffer (BCS) theories predict the electric field to be ineffective on conventional superconductors, a number of gating experiments showed the possibility of modulating the conductivity of metallic thin films and the critical temperature of conventional superconductors. All these experimental features have been explained by simple charge accumulation/depletion. In 2018, electric field control of supercurrent in conventional metallic superconductors has been demonstrated in a range of electric fields where the induced variation of charge carrier concentration in metals is negligibly small. In fact, no changes of normal state resistance and superconducting critical temperature were reported. Here, we review the experimental results obtained in the realization of field-effect metallic superconducting devices exploiting this unexplained phenomenon. We will start by presenting the seminal results on superconducting BCS wires and nano-constriction Josephson junctions (Dayem bridges) made of different materials, such as titanium, aluminum and vanadium. Then, we show the mastering of the Josephson supercurrent in superconductor-normal metal-superconductor proximity transistors suggesting that the presence of induced superconducting correlations are enough to see this unconventional field-effect. Later, we present the control of the interference pattern in a superconducting quantum interference device indicating the coupling of the electric field with thesuperconducting phase. Among the possible applications of the presented phenomenology, we conclude this review by proposing some devices that may represent a breakthrough in superconducting quantum and classical computation. △ Less

Submitted 7 January, 2020; v1 submitted 27 September, 2019; originally announced September 2019.

Comments: 19 pages, 14 figures

Journal ref: AVS Quantum Sci. 1, 016501 (2019)

Electrically Tunable Superconductivity Through Surface Orbital Polarization

Authors: Maria Teresa Mercaldo, Paolo Solinas, Francesco Giazotto, Mario Cuoco

Abstract: We investigate the physical mechanisms for achieving an electrical control of conventional spin-singlet superconductivity in thin films by focusing on the role of surface orbital polarization. Assuming a multi-orbital description of the metallic state, due to screening effects the electric field acts by modifying the strength of the surface potential and, in turn, yields non-trivial orbital-Rashba… ▽ More We investigate the physical mechanisms for achieving an electrical control of conventional spin-singlet superconductivity in thin films by focusing on the role of surface orbital polarization. Assuming a multi-orbital description of the metallic state, due to screening effects the electric field acts by modifying the strength of the surface potential and, in turn, yields non-trivial orbital-Rashba couplings. The resulting orbital polarization at the surface and in its close proximity is shown to have a dramatic impact on superconductivity. We demonstrate that, by varying the strength of the electric field, the superconducting phase can be either suppressed, i.e. turned into normal metal, or undergo a $0-π$ transition with the $π$ phase being marked by non-trivial sign change of the superconducting order parameter between different bands. These findings unveil a rich scenario to design heterostructures with superconducting orbitronics effects. △ Less

Submitted 17 September, 2020; v1 submitted 22 July, 2019; originally announced July 2019.

Comments: version ad published; 14 pages, 15 panels of figures

Journal ref: Phys. Rev. Applied 14, 034041 (2020)

Thermal flux-flow regime in long Josephson tunnel junctions

Authors: Claudio Guarcello, Paolo Solinas, Francesco Giazotto, Alessandro Braggio

Abstract: We study thermal transport induced by soliton dynamics in a long Josephson tunnel junction operating in the flux-flow regime. A thermal bias across the junction is established by imposing the superconducting electrodes to reside at different temperatures, when solitons flow along the junction. Here, we consider the effect of both a bias current and an external magnetic field on the thermal evoluti… ▽ More We study thermal transport induced by soliton dynamics in a long Josephson tunnel junction operating in the flux-flow regime. A thermal bias across the junction is established by imposing the superconducting electrodes to reside at different temperatures, when solitons flow along the junction. Here, we consider the effect of both a bias current and an external magnetic field on the thermal evolution of the device. In the flux-flow regime, a chain of magnetically-excited solitons rapidly moves along the junction driven by the bias current. We explore the range of bias current triggering the flux-flow regime at fixed values of magnetic field, and the stationary temperature distribution in this operation mode. We evidence a steady multi-peaked temperature profile which reflects on the average soliton distribution along the junction. Finally, we analyse also how the friction affecting the soliton dynamics influences the thermal evolution of the system. △ Less

Submitted 28 August, 2019; v1 submitted 30 April, 2019; originally announced April 2019.

Comments: 17 pages, 5 figures

Journal ref: J. Stat. Mech. (2019) 084006

Field-Effect Controllable Metallic Josephson Interferometer

Authors: Federico Paolucci, Francesco Vischi, Giorgio De Simoni, Claudio Guarcello, Paolo Solinas, Francesco Giazotto

Abstract: Gate-tunable Josephson junctions (JJs) are the backbone of superconducting classical and quantum computation. Typically, these systems exploit low charge concentration materials, and present technological diffculties limiting their scalability. Surprisingly, electric field modulation of supercurrent in metallic wires and JJs has been recently demonstrated. Here, we report the realization of titani… ▽ More Gate-tunable Josephson junctions (JJs) are the backbone of superconducting classical and quantum computation. Typically, these systems exploit low charge concentration materials, and present technological diffculties limiting their scalability. Surprisingly, electric field modulation of supercurrent in metallic wires and JJs has been recently demonstrated. Here, we report the realization of titanium-based monolithic interferometers which allow tuning both JJs independently via voltage bias applied to capacitively-coupled electrodes. Our experiments demonstrate full control of the amplitude of the switching current (IS) and of the superconducting phase across the single JJ in a wide range of temperatures. Astoundingly, by gate-biasing a single junction the maximum achievable total IS suppresses down to values much lower than the critical current of a single JJ. A theoretical model including gate-induced phase fluctuations on a single junction accounts for our experimental findings. This class of quantum interferometers could represent a breakthrough for several applications such as digital electronics, quantum computing, sensitive magnetometry and single-photon detection. △ Less

Submitted 23 September, 2019; v1 submitted 17 April, 2019; originally announced April 2019.

Comments: 9 pages, 4 figures

Journal ref: Nano Lett. 19, 96263-6269 (2019)

Josephson-Threshold Calorimeter

Authors: Claudio Guarcello, Alessandro Braggio, Paolo Solinas, Giovanni Piero Pepe, Francesco Giazotto

Abstract: We suggest a single-photon thermal detector based on the abrupt jump of the critical current of a temperature-biased tunnel Josephson junction formed by different superconductors, working in the dissipationless regime. The electrode with the lower critical temperature is used as radiation sensing element, so it is kept thermally floating and is connected to an antenna. The warming up resulting fro… ▽ More We suggest a single-photon thermal detector based on the abrupt jump of the critical current of a temperature-biased tunnel Josephson junction formed by different superconductors, working in the dissipationless regime. The electrode with the lower critical temperature is used as radiation sensing element, so it is kept thermally floating and is connected to an antenna. The warming up resulting from the absorption of a photon can induce a drastic measurable enhancement of the critical current of the junction. We propose a detection scheme based on a threshold mechanism for single- or multi-photon detection. This Josephson threshold detector has indeed calorimetric capabilities being able to discriminate the energy of the incident photon. So, for the realistic setup that we discuss, our detector can efficiently work as a calorimeter for photons from the mid infrared, through the optical, into the ultraviolet, specifically, for photons with frequencies in the range $[30-9\times10^4]\;\text{THz}$. In the whole range of detectable frequencies a resolving power significantly larger than one results. In order to reveal the signal, we suggest the fast measurement of the Josephson kinetic inductance. Indeed, the photon-induced change in the critical current affects the Josephson kinetic inductance of the junction, which can be non-invasively read through a LC tank circuit, inductively coupled to the junction. Finally, this readout scheme shows remarkable multiplexing capabilities. △ Less

Submitted 28 May, 2019; v1 submitted 5 January, 2019; originally announced January 2019.

Comments: 15 pages, 11 figures

Journal ref: Phys. Rev. Applied 11, 054074 (2019)

Magnetotransport Experiments on Fully Metallic Superconducting Dayem Bridge Field-Effect Transistors

Authors: Federico Paolucci, Giorgio De Simoni, Paolo Solinas, Elia Strambini, Nadia Ligato, Pauli Virtanen, Alessandro Braggio, Francesco Giazotto

Abstract: In the last 60 years conventional solid and electrolyte gating allowed sizable modulations of the surface carrier concentration in metallic superconductors resulting in tuning their conductivity and changing their critical temperature. Recent conventional gating experiments on superconducting metal nano-structures showed full suppression of the critical current without variations of the normal sta… ▽ More In the last 60 years conventional solid and electrolyte gating allowed sizable modulations of the surface carrier concentration in metallic superconductors resulting in tuning their conductivity and changing their critical temperature. Recent conventional gating experiments on superconducting metal nano-structures showed full suppression of the critical current without variations of the normal state resistance and the critical temperature. These results still miss a microscopic explanation. In this article, we show a complete set of gating experiments on Ti-based superconducting Dayem bridges and a suggested classical thermodynamic model which seems to account for several of our experimental findings. In particular, zero-bias resistance and critical current IC measurements highlight the following: the suppression of IC with both polarities of gate voltage, the surface nature of the effect, the critical temperature independence from the electric field and the gate-induced growth of a sub-gap dissipative component. In addition, the temperature dependence of the Josephson critical current seems to show the transition from the ballistic Kulik-Omelyanchuck behavior to the Ambegaokar-Baratoff tunnel-like characteristic by increasing the electric field. Furthermore, the IC suppression persists in the presence of sizeable perpendicular-to-plane magnetic fields. We propose a classical thermodynamic model able to describe some of the experimental observations of the present and previous works. Above all, the model grabs the bipolar electric field induced suppression of IC and the emergence of a sub-gap dissipative component near full suppression of the supercurrent. Finally, applications employing the discussed effect are proposed. △ Less

Submitted 17 December, 2018; v1 submitted 1 August, 2018; originally announced August 2018.

Comments: 13 pages, 7 figures

Journal ref: Phys. Rev. Applied 11, 024061 (2019)

Non-linear critical current thermal response of an asymmetric Josephson tunnel junction

Authors: Claudio Guarcello, Alessandro Braggio, Paolo Solinas, Francesco Giazotto

Abstract: We theoretically investigate the critical current of a thermally-biased SIS Josephson junction formed by electrodes made by different BCS superconductors. The response of the device is analyzed as a function of the asymmetry parameter, $r=T_{c_1} /T_{c_2}$. We highlight the appearance of jumps in the critical current of an asymmetric junction, namely, when $r\neq1$. In fact, in such case at temper… ▽ More We theoretically investigate the critical current of a thermally-biased SIS Josephson junction formed by electrodes made by different BCS superconductors. The response of the device is analyzed as a function of the asymmetry parameter, $r=T_{c_1} /T_{c_2}$. We highlight the appearance of jumps in the critical current of an asymmetric junction, namely, when $r\neq1$. In fact, in such case at temperatures at which the BCS superconducting gaps coincide, the critical current suddenly increases or decreases. In particular, we thoroughly discuss the counterintuitively behaviour of the critical current, which increases by enhancing the temperature of one lead, instead of monotonically reducing. In this case, we found that the largest jump of the critical current is obtained for moderate asymmetries, $r\simeq3$. In view of these results, the discussed behavior can be speculatively proposed as a temperature-based threshold single-photon detector with photon-counting capabilities, which operates non-linearly in the non-dissipative channel. △ Less

Submitted 1 February, 2019; v1 submitted 9 July, 2018; originally announced July 2018.

Comments: 12 pages, 9 figures

Journal ref: Phys. Rev. Applied 11, 024002 (2019)

Ancilla-assisted measurement of quantum work

Authors: Gabriele De Chiara, Paolo Solinas, Federico Cerisola, Augusto J. Roncaglia

Abstract: We review the use of an external auxiliary detector for measuring the full distribution of the work performed on or extracted from a quantum system during a unitary thermodynamic process. We first illustrate two paradigmatic schemes that allow one to measure the work distribution: a Ramsey technique to measure the characteristic function and a positive operator valued measure (POVM) scheme to dire… ▽ More We review the use of an external auxiliary detector for measuring the full distribution of the work performed on or extracted from a quantum system during a unitary thermodynamic process. We first illustrate two paradigmatic schemes that allow one to measure the work distribution: a Ramsey technique to measure the characteristic function and a positive operator valued measure (POVM) scheme to directly measure the work probability distribution. Then, we show that these two ideas can be understood in a unified framework for assessing work fluctuations through a generic quantum detector and describe two protocols that are able to yield complementary information. This allows us also to highlight how quantum work is affected by the presence of coherences in the system's initial state. Finally, we describe physical implementations and experimental realisations of the first two schemes. △ Less

Submitted 31 August, 2018; v1 submitted 15 May, 2018; originally announced May 2018.

Comments: Published version. As a chapter of: F. Binder, L. A. Correa, C. Gogolin, J. Anders, and G. Adesso (eds.), "Thermodynamics in the quantum regime - Recent Progress and Outlook", (Springer International Publishing)

Solitonic thermal transport in a current biased long Josephson junction

Authors: Claudio Guarcello, Paolo Solinas, Alessandro Braggio, Francesco Giazotto

Abstract: We investigate the coherent energy and thermal transport in a temperature-biased long Josephson tunnel junction, when a Josephson vortex, i.e., a soliton, steadily drifts driven by an electric bias current. We demonstrate that thermal transport through the junction can be controlled by the bias current, since it determines the steady-state velocity of the drifting soliton. We study the effects on… ▽ More We investigate the coherent energy and thermal transport in a temperature-biased long Josephson tunnel junction, when a Josephson vortex, i.e., a soliton, steadily drifts driven by an electric bias current. We demonstrate that thermal transport through the junction can be controlled by the bias current, since it determines the steady-state velocity of the drifting soliton. We study the effects on thermal transport of the damping affecting the soliton dynamics. In fact, a soliton locally influences the power flowing through the junction and can cause the variation of the temperature of the device. When the soliton speed increases approaching its limiting value, i.e., the Swihart velocity, we demonstrate that the soliton-induces thermal effects significantly modify. Finally, we discuss how the appropriate material selection of the superconductors forming the junction is essential, since short quasiparticle relaxation times are required to observe fast thermal effects. △ Less

Submitted 5 September, 2018; v1 submitted 15 May, 2018; originally announced May 2018.

Comments: 9 pages, 5 figures

Journal ref: Phys. Rev. B 98, 104501 (2018)

Ultra-efficient superconducting Dayem bridge field-effect transistor

Authors: Federico Paolucci, Giorgio De Simoni, Elia Strambini, Paolo Solinas, Francesco Giazotto

Abstract: Superconducting field-effect transitor (SuFET) and Josephson field-effect transistor (JoFET) technologies take advantage of electric field induced control of charge carrier concentration in order to modulate the channel superconducting properties. Despite field-effect is believed to be unaffective for superconducting metals, recent experiments showed electric field dependent modulation of the crit… ▽ More Superconducting field-effect transitor (SuFET) and Josephson field-effect transistor (JoFET) technologies take advantage of electric field induced control of charge carrier concentration in order to modulate the channel superconducting properties. Despite field-effect is believed to be unaffective for superconducting metals, recent experiments showed electric field dependent modulation of the critical current (IC) in a fully metallic transistor. Yet, the grounding mechanism of this phenomenon is not completely understood. Here, we show the experimental realization of Ti-based Dayem bridge field-effect transistors (DB-FETs) able to control IC of the superconducting channel. Our easy fabrication process DB-FETs show symmetric full suppression of IC for an applied critical gate voltage as low as VCG~+-8V at temperatures reaching about the 85% of the record critical temperature TC~550mK for titanium. The gate-independent TC and normal state resistance (RN) coupled with the increase of resistance in the supercoducting state (RS) for gate voltages close to the critical value (VCG) suggest the creation of field-effect induced metallic puddles in the superconducting sea. Our devices show extremely high values of transconductance (gMAXm~15uA/V at VG~+-6.5V) and variations of Josephson kinetic inductance (LK) with VG of two orders of magnitude. Therefore, the DB-FET appears as an ideal candidate for the realization of superconducting electronics, superconducting qubits, tunable interferometers as well as photon detectors. △ Less

Submitted 13 March, 2018; originally announced March 2018.

Comments: 9 pages, 4 figures

Journal ref: Nano Lett. 18, 4195 (2018)

Phase-coherent solitonic Josephson heat oscillator

Authors: Claudio Guarcello, Paolo Solinas, Alessandro Braggio, Francesco Giazotto

Abstract: Since its recent foundation, phase-coherent caloritronics has sparkled continuous interest giving rise to numerous concrete applications. This research field deals with the coherent manipulation of heat currents in mesoscopic superconducting devices by mastering the Josephson phase difference. Here, we introduce a new generation of devices for fast caloritronics able to control local heat power an… ▽ More Since its recent foundation, phase-coherent caloritronics has sparkled continuous interest giving rise to numerous concrete applications. This research field deals with the coherent manipulation of heat currents in mesoscopic superconducting devices by mastering the Josephson phase difference. Here, we introduce a new generation of devices for fast caloritronics able to control local heat power and temperature through manipulation of Josephson vortices, i.e., solitons. Although most salient features concerning Josephson vortices in long Josephson junctions were comprehensively hitherto explored, little is known about soliton-sustained coherent thermal transport. We demonstrate that the soliton configuration determines the temperature profile in the junction, so that, in correspondence of each magnetically induced soliton, both the flowing thermal power and the temperature significantly enhance. Finally, we thoroughly discuss a fast solitonic Josephson heat oscillator, whose frequency is in tune with the oscillation frequency of the magnetic drive. Notably, the proposed heat oscillator can effectively find application as a tunable thermal source for nanoscale heat engines and coherent thermal machines. △ Less

Submitted 16 August, 2018; v1 submitted 7 March, 2018; originally announced March 2018.

Comments: 14 pages, 8 figures

Journal ref: Sci. Rep. 8, 12287 (2018)

Solitonic Josephson thermal transport

Authors: Claudio Guarcello, Paolo Solinas, Alessandro Braggio, Francesco Giazotto

Abstract: We explore the coherent thermal transport sustained by solitons through a long Josephson junction, as a thermal gradient across the system is established. We observe that a soliton causes the heat current through the system to increase. Correspondingly, the junction warms up in correspondence of the soliton, with temperature peaks up to, e.g., approximately 56 mK for a realistic Nb-based proposed… ▽ More We explore the coherent thermal transport sustained by solitons through a long Josephson junction, as a thermal gradient across the system is established. We observe that a soliton causes the heat current through the system to increase. Correspondingly, the junction warms up in correspondence of the soliton, with temperature peaks up to, e.g., approximately 56 mK for a realistic Nb-based proposed setup at a bath temperature Tbath = 4.2 K. The thermal effects on the dynamics of the soliton are also discussed. Markedly, this system inherits the topological robustness of the solitons. In view of these results, the proposed device can effectively find an application as a superconducting thermal router in which the thermal transport can be locally mastered through solitonic excitations, which positions can be externally controlled through a magnetic field and a bias current. △ Less

Submitted 21 March, 2018; v1 submitted 1 December, 2017; originally announced December 2017.

Comments: 9 pages, 6 figures

Journal ref: Phys. Rev. Applied 9, 034014 (2018)

Proximity SQUID single photon detector via temperature-to-voltage conversion

Authors: P. Solinas, F. Giazotto, G. P. Pepe

Abstract: We propose a single photon detector based on a superconducting quantum interference device (SQUID) with superconductor-normal metal-superconductor Josephson weak links. One of the two Josephson junctions is connected to an antenna, and is heated when a photon is absorbed. The increase of the weak link temperature exponentially suppresses the Josephson critical current thereby inducing an asymmetry… ▽ More We propose a single photon detector based on a superconducting quantum interference device (SQUID) with superconductor-normal metal-superconductor Josephson weak links. One of the two Josephson junctions is connected to an antenna, and is heated when a photon is absorbed. The increase of the weak link temperature exponentially suppresses the Josephson critical current thereby inducing an asymmetry in the SQUID. This generates a voltage pulse across the SQUID that can be measured with a threshold detector. Realized with realistic parameters the device can be used as a single photon detector, and as a calorimeter since it is able to discriminate photons frequency above $5~$THz with a signal-to-noise ratio larger than $20$. The detector performance are robust with respect to working temperatures between $0.1~$ K and $0.5~$K, and thermal noise perturbation. △ Less

Submitted 19 August, 2018; v1 submitted 29 November, 2017; originally announced November 2017.

Comments: 8 pages, 6 figures. Updated version

Journal ref: Phys. Rev. Applied 10, 024015 (2018)

Metallic supercurrent field-effect transistor

Authors: G. De Simoni, F. Paolucci, P. Solinas, E. Strambini, F. Giazotto

Abstract: In their original formulation of superconductivity, the London brothers predicted the exponential suppression of an $electrostatic$ field inside a superconductor over the so-called London penetration depth, $λ_L$. Despite a few experiments indicating hints of perturbation induced by electrostatic fields, no clue has been provided so far on the possibility to manipulate metallic superconductors via… ▽ More In their original formulation of superconductivity, the London brothers predicted the exponential suppression of an $electrostatic$ field inside a superconductor over the so-called London penetration depth, $λ_L$. Despite a few experiments indicating hints of perturbation induced by electrostatic fields, no clue has been provided so far on the possibility to manipulate metallic superconductors via field-effect. Here we report field-effect control of the supercurrent in $all$-metallic transistors made of different Bardeen-Cooper-Schrieffer (BCS) superconducting thin films. At low temperature, our field-effect transistors (FETs) show a monotonic decay of the critical current under increasing electrostatic field up to total quenching for gate voltage values as large as $\pm 40$V in titanium-based devices. This $bipolar$ field effect persists up to $\sim 85\%$ of the critical temperature ($\sim 0.41$K), and in the presence of sizable magnetic fields. A similar behavior was observed in aluminum thin film FETs. A phenomenological theory accounts for our observations, and points towards the interpretation in terms of an electric-field-induced perturbation propagating inside the superconducting film. In our understanding, this affects the pairing potential and quenches the supercurrent. These results could represent a groundbreaking asset for the realization of an $all$-metallic superconducting field-effect electronics and leading-edge quantum information architectures. △ Less

Submitted 5 June, 2018; v1 submitted 6 October, 2017; originally announced October 2017.

Comments: 9 pages, 7 color figures, revised text version

Journal ref: Nature Nanotechnology 13, 802 (2018)

Josephson thermal memory

Authors: Claudio Guarcello, Paolo Solinas, Alessandro Braggio, Massimiliano Di Ventra, Francesco Giazotto

Abstract: We propose a superconducting thermal memory device that exploits the thermal hysteresis in a flux-controlled, temperature-biased superconducting quantum-interference device (SQUID). This system reveals a flux-controllable temperature bistability, which can be used to define two well-distinguishable thermal logic states. We discuss a suitable writing-reading procedure for these memory states. The t… ▽ More We propose a superconducting thermal memory device that exploits the thermal hysteresis in a flux-controlled, temperature-biased superconducting quantum-interference device (SQUID). This system reveals a flux-controllable temperature bistability, which can be used to define two well-distinguishable thermal logic states. We discuss a suitable writing-reading procedure for these memory states. The time of the memory writing operation is expected to be on the order of ~0.2 ns, for a Nb-based SQUID in thermal contact with a phonon bath at 4:2 K. We suggest a non-invasive readout scheme for the memory states based on the measurement of the effective resonance frequency of a tank circuit inductively coupled to the SQUID. The proposed device paves the way for a practical implementation of thermal logic and computation. The advantage of this proposal is that it represents also an example of harvesting thermal energy in superconducting circuits. △ Less

Submitted 19 January, 2018; v1 submitted 16 June, 2017; originally announced June 2017.

Comments: 10 pages, 7 figures

Journal ref: Phys. Rev. Applied 9, 014021 (2018)

Measurement-dependent corrections to work distributions arising from quantum coherences

Authors: P. Solinas, H. J. D. Miller, J. Anders

Abstract: For a quantum system undergoing a unitary process work is commonly defined based on the Two Projective Measurement (TPM) protocol which measures the energies of the system before and after the process. However, it is well known that projective measurements disregard quantum coherences of the system with respect to the energy basis, thus removing potential quantum signatures in the work distributio… ▽ More For a quantum system undergoing a unitary process work is commonly defined based on the Two Projective Measurement (TPM) protocol which measures the energies of the system before and after the process. However, it is well known that projective measurements disregard quantum coherences of the system with respect to the energy basis, thus removing potential quantum signatures in the work distribution. Here we consider weak measurements of the system's energy difference and establish corrections to work averages arising from initial system coherences. We discuss two weak measurement protocols that couple the system to a detector, prepared and measured either in the momentum or the position eigenstates. Work averages are derived for when the system starts in the proper thermal state versus when the initial system state is a pure state with thermal diagonal elements and coherences characterised by a set of phases. We show that by controlling only the phase differences between the energy eigenstate contributions in the system's initial pure state, the average work done during the same unitary process can be controlled. By changing the phases alone one can toggle from regimes where the systems absorbs energy, i.e. a work cost, to the ones where it emits energy, i.e. work can be drawn. This suggests that the coherences are additional resources that can be used to manipulate or store energy in a quantum system. △ Less

Submitted 29 May, 2017; originally announced May 2017.

Comments: 9 pages, 3 figures

Journal ref: Phys. Rev. A 96, 052115 (2017)

Spectral representation of the heat current in a driven Josephson junction

Authors: P. Virtanen, P. Solinas, F. Giazotto

Abstract: We discuss thermal transport through a Josephson junction in a time-dependent situation. We write the spectral representation of the heat current pumped by a generic drive. This enables separation of the dissipative and reactive contributions, of which the latter do not contribute to long-time averages. We discuss the physical interpretation, and note that the condensate heat current identified in… ▽ More We discuss thermal transport through a Josephson junction in a time-dependent situation. We write the spectral representation of the heat current pumped by a generic drive. This enables separation of the dissipative and reactive contributions, of which the latter do not contribute to long-time averages. We discuss the physical interpretation, and note that the condensate heat current identified in [K. Maki and A. Griffin, Phys. Rev. Lett. 15, 921 (1965)] is purely reactive. The results enable a convenient description of heat exchanges in a Josephson system in the presence of an external drive, with possible applications for the implementation of new cooling devices. △ Less

Submitted 16 February, 2017; originally announced February 2017.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. B 95, 144512 (2017)

Hysteretic superconducting heat-flux quantum modulator

Authors: Claudio Guarcello, Paolo Solinas, Massimiliano Di Ventra, Francesco Giazotto

Abstract: We discuss heat transport in a thermally-biased SQUID in the presence of an external magnetic flux, when a non-negligible inductance of the SQUID ring is taken into account. A properly sweeping driving flux causes the thermal current to modulate and behave hysteretically. The response of this device is analysed as a function of both the hysteresis parameter and degree of asymmetry of the SQUID, hi… ▽ More We discuss heat transport in a thermally-biased SQUID in the presence of an external magnetic flux, when a non-negligible inductance of the SQUID ring is taken into account. A properly sweeping driving flux causes the thermal current to modulate and behave hysteretically. The response of this device is analysed as a function of both the hysteresis parameter and degree of asymmetry of the SQUID, highlighting the parameter range over which hysteretic behavior is observable. Markedly, also the temperature of the SQUID shows hysteretic evolution, with sharp transitions characterized by temperature jumps up to, e.g., ~ 38mK for a realistic Al-based setup. In view of these results, the proposed device can effectively find application as a temperature-based superconducting memory element, working even at GHz frequencies by suitably choosing the superconductor on which the device is based. △ Less

Submitted 21 March, 2017; v1 submitted 23 January, 2017; originally announced January 2017.

Comments: 9 pages, 10 figures

Journal ref: Phys. Rev. Applied 7, 044021 (2017)

Solitonic Josephson-based meminductive systems

Authors: Claudio Guarcello, Paolo Solinas, Massimiliano Di Ventra, Francesco Giazotto

Abstract: Memristors, memcapacitors, and meminductors, collectively called memelements, represent an innovative generation of circuit elements whose properties depend on the state and history of the system. The hysteretic behavior of one of their constituent variables, under the effect of an external time-dependent perturbation, is their distinctive fingerprint. In turn, this feature endows them with the ab… ▽ More Memristors, memcapacitors, and meminductors, collectively called memelements, represent an innovative generation of circuit elements whose properties depend on the state and history of the system. The hysteretic behavior of one of their constituent variables, under the effect of an external time-dependent perturbation, is their distinctive fingerprint. In turn, this feature endows them with the ability to both store and process information on the same physical location, a property that is expected to benefit many applications ranging from unconventional computing to adaptive electronics to robotics, to name just a few. For all these types of applications, it is important to find appropriate memelements that combine a wide range of memory states (multi-state memory), long memory retention times, and protection against unavoidable noise. Although several physical systems belong to the general class of memelements, few of them combine all of these important physical features in a single component. Her we demonstrate theoretically a superconducting memory structure based on solitonic long Josephson junctions (LJJs). We show that the Josephson critical current of the junction behaves hysteretically as an external magnetic field is properly swept. According to the hysteretic path displayed by the critical current, a LJJ can be used as a multi-state memory, with a controllable number of available states. In addition, since solitons are at the core of its operation, this system provides an intrinsic topological protection against external perturbations. Solitonic Josephson-based memelements may find applications as memories, and in other emerging areas such as memcomputing, i.e., computing directly in/by the memory. △ Less

Submitted 21 October, 2016; originally announced October 2016.

Comments: 14 pages, 9 figures

Journal ref: Sci. Rep. 7, 46736 (2017)

Coherent Manipulation of Thermal Transport by Tunable Electron-Photon and Electron-Phonon Interaction

Authors: Federico Paolucci, Giuliano Timossi, Paolo Solinas, Francesco Giazotto

Abstract: We propose a system where coherent thermal transport between two reservoirs in non-galvanic contact is modulated by independently tuning the electron-photon and the electron-phonon coupling. The scheme is based on two gate-controlled electrodes capacitively coupled through a dc-SQUID as intermediate phase-tunable resonator. Thereby the electron-photon interaction is modulated by controlling the fl… ▽ More We propose a system where coherent thermal transport between two reservoirs in non-galvanic contact is modulated by independently tuning the electron-photon and the electron-phonon coupling. The scheme is based on two gate-controlled electrodes capacitively coupled through a dc-SQUID as intermediate phase-tunable resonator. Thereby the electron-photon interaction is modulated by controlling the flux threading the dc-SQUID and the impedance of the two reservoirs, while the electron-phonon coupling is tuned by controlling the charge carrier concentration in the electrodes. To quantitatively evaluate the behavior of the system we propose to exploit graphene reservoirs. In this case, the scheme can work at temperatures reaching 1 K, with unprecedented temperature modulations as large as 245 mK, transmittance up to 99% and energy conversion efficiency up to 50%. Finally, the accuracy of heat transport control allows to use this system as an experimental tool to determine the electron-phonon coupling in two dimensional electronic systems (2DES). △ Less

Submitted 17 August, 2017; v1 submitted 24 September, 2016; originally announced September 2016.

Comments: 5 pages, 4 figures

Journal ref: J. Appl. Phys. 121, 244305 (2017)

0-$π$ phase-controllable $thermal$ Josephson junction

Authors: Antonio Fornieri, Giuliano Timossi, Pauli Virtanen, Paolo Solinas, Francesco Giazotto

Abstract: Two superconductors coupled by a weak link support an equilibrium Josephson electrical current which depends on the phase difference $\varphi$ between the superconducting condensates [1]. Yet, when a temperature gradient is imposed across the junction, the Josephson effect manifests itself through a coherent component of the heat current that flows oppositely to the thermal gradient for… ▽ More Two superconductors coupled by a weak link support an equilibrium Josephson electrical current which depends on the phase difference $\varphi$ between the superconducting condensates [1]. Yet, when a temperature gradient is imposed across the junction, the Josephson effect manifests itself through a coherent component of the heat current that flows oppositely to the thermal gradient for $ \varphi <π/2$ [2-4]. The direction of both the Josephson charge and heat currents can be inverted by adding a $π$ shift to $\varphi$. In the static electrical case, this effect was obtained in a few systems, e.g. via a ferromagnetic coupling [5,6] or a non-equilibrium distribution in the weak link [7]. These structures opened new possibilities for superconducting quantum logic [6,8] and ultralow power superconducting computers [9]. Here, we report the first experimental realization of a thermal Josephson junction whose phase bias can be controlled from $0$ to $π$. This is obtained thanks to a superconducting quantum interferometer that allows to fully control the direction of the coherent energy transfer through the junction [10]. This possibility, joined to the completely superconducting nature of our system, provides temperature modulations with unprecedented amplitude of $\sim$ 100 mK and transfer coefficients exceeding 1 K per flux quantum at 25 mK. Then, this quantum structure represents a fundamental step towards the realization of caloritronic logic components, such as thermal transistors, switches and memory devices [10,11]. These elements, combined with heat interferometers [3,4,12] and diodes [13,14], would complete the thermal conversion of the most important phase-coherent electronic devices and benefit cryogenic microcircuits requiring energy management, such as quantum computing architectures and radiation sensors. △ Less

Submitted 15 December, 2016; v1 submitted 8 July, 2016; originally announced July 2016.

Comments: 10 pages, 9 color figures

Journal ref: Nat. Nanotechn. 12, 425-429 (2017)

Probing Quantum Interference Effects in the Work Distribution

Authors: Paolo Solinas, Simone Gasparinetti

Abstract: What is the role of coherence in determining the distribution of work done on a quantum system? We approach this question from an operational perspective and consider a setup in which the internal energy of a closed system is recorded by a quantum detector before and after the system is acted upon by an external drive. We find that the resulting work distribution depends on the initial state of th… ▽ More What is the role of coherence in determining the distribution of work done on a quantum system? We approach this question from an operational perspective and consider a setup in which the internal energy of a closed system is recorded by a quantum detector before and after the system is acted upon by an external drive. We find that the resulting work distribution depends on the initial state of the detector as well as on the choice of the final measurement. We consider two complementary measurement schemes, both of which show clear signatures of quantum interference. We specifically discuss how to implement these schemes in the circuit QED architecture, using an artificial atom as the system and a quantized mode of the electromagnetic field as the detector. Different measurement schemes can be realized by preparing the field either in a superposition of Fock states or in a coherent state and exploiting state-of-the art techniques for the characterization of microwave radiation at the quantum level. More generally, the single bosonic mode we utilize is arguably the minimal quantum detector capable of capturing the complementary aspects of the work distribution discussed here. △ Less

Submitted 28 June, 2016; originally announced June 2016.

Comments: 12 pages, 3 figures

Journal ref: Phys. Rev. A 94, 052103 (2016)

Coherent diffraction of thermal currents in long Josephson tunnel junctions

Authors: Claudio Guarcello, Francesco Giazotto, Paolo Solinas

Abstract: We discuss heat transport in thermally-biased long Josephson tunnel junctions in the presence of an in-plane magnetic field. In full analogy with the Josephson critical current, the phase-dependent component of the heat current through the junction displays coherent diffraction. Thermal transport is analyzed as a function of both the length and the damping of the junction, highlighting deviations… ▽ More We discuss heat transport in thermally-biased long Josephson tunnel junctions in the presence of an in-plane magnetic field. In full analogy with the Josephson critical current, the phase-dependent component of the heat current through the junction displays coherent diffraction. Thermal transport is analyzed as a function of both the length and the damping of the junction, highlighting deviations from the standard Fraunhofer pattern characteristic of short junctions. The heat current diffraction patterns show features strongly related to the formation and penetration of Josephson vortices, i.e. solitons. We show that a dynamical treatment of the system is crucial for the realistic description of the Josephson junction and it leads to peculiar results. In fact, hysteretic behaviors in the diffraction patterns when the field is swept up and down are observed, corresponding to the trapping of vortices in the junction. △ Less

Submitted 5 September, 2016; v1 submitted 3 June, 2016; originally announced June 2016.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. B 94, 054522 (2016)

A Microwave Josephson Refrigerator

Authors: Paolo Solinas, Riccardo Bosisio, Francesco Giazotto

Abstract: We present a microwave quantum refrigeration principle based on the Josephson effect. When a superconducting quantum interference device (SQUID) is pierced by a time-dependent magnetic flux, it induces changes in the macroscopic quantum phase and an effective finite bias voltage appears across the SQUID. This voltage can be used to actively cool well below the lattice temperature one of the superc… ▽ More We present a microwave quantum refrigeration principle based on the Josephson effect. When a superconducting quantum interference device (SQUID) is pierced by a time-dependent magnetic flux, it induces changes in the macroscopic quantum phase and an effective finite bias voltage appears across the SQUID. This voltage can be used to actively cool well below the lattice temperature one of the superconducting electrodes forming the interferometer. The achievable cooling performance combined with the simplicity and scalability intrinsic to the structure pave the way to a number of applications in quantum technology. △ Less

Submitted 4 July, 2016; v1 submitted 19 May, 2016; originally announced May 2016.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. B 93, 224521 (2016)

Energy exchange in driven open quantum systems at strong coupling

Authors: Matteo Carrega, Paolo Solinas, Maura Sassetti, Ulrich Weiss

Abstract: The time-dependent energy transfer in a driven quantum system strongly coupled to a heat bath is studied within an influence functional approach. Exact formal expressions for the statistics of energy dissipation into the different channels are derived. The general method is applied to the driven dissipative two-state system. It is shown that the energy flows obey a balance relation, and that, for… ▽ More The time-dependent energy transfer in a driven quantum system strongly coupled to a heat bath is studied within an influence functional approach. Exact formal expressions for the statistics of energy dissipation into the different channels are derived. The general method is applied to the driven dissipative two-state system. It is shown that the energy flows obey a balance relation, and that, for strong coupling, the interaction may constitute the major dissipative channel. Results in analytic form are presented for a particular value of strong Ohmic dissipation. The energy flows show interesting behaviors including driving-induced coherences and quantum stochastic resonances. △ Less

Submitted 17 June, 2016; v1 submitted 21 March, 2016; originally announced March 2016.

Comments: 7 pages, 2 figures

Journal ref: Phys. Rev. Lett. 116, 240403 (2016)

Negative differential thermal conductance and heat amplification in superconducting hybrid devices

Authors: Antonio Fornieri, Giuliano Timossi, Riccardo Bosisio, Paolo Solinas, Francesco Giazotto

Abstract: We investigate the thermal transport properties of a temperature-biased Josephson tunnel junction composed of two different superconductors. We show that this simple system can provide a large negative differential thermal conductance (NDTC) with a peak-to-valley ratio of $\sim 3$ in the transmitted electronic heat current. The NDTC is then exploited to outline the caloritronic analogue of the tun… ▽ More We investigate the thermal transport properties of a temperature-biased Josephson tunnel junction composed of two different superconductors. We show that this simple system can provide a large negative differential thermal conductance (NDTC) with a peak-to-valley ratio of $\sim 3$ in the transmitted electronic heat current. The NDTC is then exploited to outline the caloritronic analogue of the tunnel diode, which can exhibit a modulation of the output temperature as large as 80 mK at a bath temperature of 50 mK. Moreover, this device may work in a regime of thermal hysteresis that can be used to store information as a thermal memory. On the other hand, the NDTC effect offers the opportunity to conceive two different designs of a thermal transistor, which might operate as a thermal switch or as an amplifier/modulator. The latter shows a heat amplification factor $>1$ in a 500-mK-wide working region of the gate temperature. After the successful realization of heat interferometers and thermal diodes, this kind of structures would complete the conversion of the most important electronic devices in their thermal counterparts, breaking ground for coherent caloritronics nanocircuits where heat currents can be manipulated at will. △ Less

Submitted 11 February, 2016; originally announced February 2016.

Comments: 9 pages, 7 colour figures

Journal ref: Phys. Rev. B 93, 134508 (2016)

Photonic heat conduction in Josephson-coupled Bardeen-Cooper-Schrieffer superconductors

Authors: R. Bosisio, P. Solinas, A. Braggio, F. Giazotto

Abstract: We investigate the photon-mediated heat flow between two Josephson-coupled Bardeen-Cooper-Schrieffer (BCS) superconductors. We demonstrate that in standard low temperature experiments involving temperature-biased superconducting quantum interference devices (SQUIDs), this radiative contribution is negligible if compared to the direct galvanic one, but it largely exceeds the heat exchanged between… ▽ More We investigate the photon-mediated heat flow between two Josephson-coupled Bardeen-Cooper-Schrieffer (BCS) superconductors. We demonstrate that in standard low temperature experiments involving temperature-biased superconducting quantum interference devices (SQUIDs), this radiative contribution is negligible if compared to the direct galvanic one, but it largely exceeds the heat exchanged between electrons and the lattice phonons. The corresponding thermal conductance is found to be several orders of magnitude smaller, for real experiments setup parameters, than the universal quantum of thermal conductance, kappa_0(T)=pi k_B^2T/6hbar. △ Less

Submitted 9 May, 2016; v1 submitted 17 December, 2015; originally announced December 2015.

Comments: 8 pages, 6 figures

Journal ref: Phys. Rev. B 93, 144512 (2016)

Computation of transient dynamics of energy power for a dissipative two state system

Authors: Matteo Carrega, Paolo Solinas, Alessandro Braggio, Maura Sassetti

Abstract: We consider a two level system coupled to a thermal bath and we investigate the variation of energy transferred to the reservoir as a function of time. The physical quantity under investigation is the time-dependent quantum average power. We compare quantum master equation approaches with functional influence method. Differences and similarities between the methods are analyzed, showing deviations… ▽ More We consider a two level system coupled to a thermal bath and we investigate the variation of energy transferred to the reservoir as a function of time. The physical quantity under investigation is the time-dependent quantum average power. We compare quantum master equation approaches with functional influence method. Differences and similarities between the methods are analyzed, showing deviations at low temperature between the functional integral approach and the predictions based on master equations. △ Less

Submitted 19 November, 2015; originally announced November 2015.

Comments: 13 pages, 2 figures, proceeding of the conference UPoN 2015

Journal ref: J. Stat. Mech. 5 054014 (2016)

Parasitic effects in SQUID-based radiation comb generators

Authors: Riccardo Bosisio, Francesco Giazotto, Paolo Solinas

Abstract: We study several parasitic effects on the implementation of a Josephson radiation comb generator (JRCG) based on a dc superconducting quantum interference device (SQUID) driven by an external magnetic field. This system can be used as a radiation generator similarly to what is done in optics and metrology, and allows one to generate up to several hundreds of harmonics of the driving frequency. Fir… ▽ More We study several parasitic effects on the implementation of a Josephson radiation comb generator (JRCG) based on a dc superconducting quantum interference device (SQUID) driven by an external magnetic field. This system can be used as a radiation generator similarly to what is done in optics and metrology, and allows one to generate up to several hundreds of harmonics of the driving frequency. First we take into account how assuming a finite loop geometrical inductance and junction capacitance in each SQUID may alter the operation of this device. Then, we estimate the effect of imperfections in the fabrication of an array of SQUIDs, which is an unavoidable source of errors in practical situations. We show that the role of the junction capacitance is in general negligible, whereas the geometrical inductance has a beneficial effect on the performance of the device. The errors on the areas and junction resistance asymmetries may deteriorate the performance, but their effect can be limited up to a large extent with a suitable choice of fabrication parameters. △ Less

Submitted 26 November, 2015; v1 submitted 23 May, 2015; originally announced May 2015.

Comments: 9 pages, 9 figures

Journal ref: J. Appl. Phys. 118, 213904 (2015)

Full distribution of work done on a quantum system for arbitrary initial states

Authors: P. Solinas, S. Gasparinetti

Abstract: We propose a novel approach to define and measure the statistics of work, internal energy and dissipated heat in a driven quantum system. In our framework the presence of a physical detector arises naturally and work and its statistics can be investigated in the most general case. In particular, we show that the quantum coherence of the initial state can lead to measurable effects on the moments o… ▽ More We propose a novel approach to define and measure the statistics of work, internal energy and dissipated heat in a driven quantum system. In our framework the presence of a physical detector arises naturally and work and its statistics can be investigated in the most general case. In particular, we show that the quantum coherence of the initial state can lead to measurable effects on the moments of the work done on the system. At the same time, we recover the known results if the initial state is a statistical mixture of energy eigenstates. Our method can also be applied to measure the dissipated heat in an open quantum system. By sequentially coupling the system to a detector, we can track the energy dissipated in the environment while accessing only the system degrees of freedom. △ Less

Submitted 16 August, 2015; v1 submitted 7 April, 2015; originally announced April 2015.

Comments: 8 pages, 2 figures. Title changed

Journal ref: Phys. Rev. E 92, 042150 (2015)

Ferromagnetic insulator-based superconducting junctions as sensitive electron thermometers

Authors: F. Giazotto, P. Solinas, A. Braggio, F. S. Bergeret

Abstract: We present an exhaustive theoretical analysis of charge and thermoelectric transport in a normal metal-ferromagnetic insulator-superconductor (NFIS) junction, and explore the possibility of its use as a sensitive thermometer. We investigated the transfer functions and the intrinsic noise performance for different measurement configurations. A common feature of all configurations is that the best t… ▽ More We present an exhaustive theoretical analysis of charge and thermoelectric transport in a normal metal-ferromagnetic insulator-superconductor (NFIS) junction, and explore the possibility of its use as a sensitive thermometer. We investigated the transfer functions and the intrinsic noise performance for different measurement configurations. A common feature of all configurations is that the best temperature noise performance is obtained in the non-linear temperature regime for a structure based on an europium chalcogenide ferromagnetic insulator in contact with a superconducting Al film structure. For an open-circuit configuration, although the maximal intrinsic temperature sensitivity can achieve $10$nKHz$^{-1/2}$, a realistic amplifying chain will reduce the sensitivity up to $10$$μ$KHz$^{-1/2}$. To overcome this limitation we propose a measurement scheme in a closed-circuit configuration based on state-of-art SQUID detection technology in an inductive setup. In such a case we show that temperature noise can be as low as $35$nKHz$^{-1/2}$. We also discuss a temperature-to-frequency converter where the obtained thermo-voltage developed over a Josephson junction operated in the dissipative regime is converted into a high-frequency signal. We predict that the structure can generate frequencies up to $\sim 120$GHz, and transfer functions up to $200$GHz/K at around $\sim 1$K. If operated as electron thermometer, the device may provide temperature noise lower than $35$nKHz$^{-1/2}$ thereby being potentially attractive for radiation sensing applications. △ Less

Submitted 11 October, 2015; v1 submitted 26 February, 2015; originally announced February 2015.

Comments: 11 pages, 10 color figures

Journal ref: Phys. Rev. Applied 4, 044016 (2015)

Radiation comb generation with extended Josephson junctions

Authors: P. Solinas, R. Bosisio, F. Giazotto

Abstract: We propose the implementation of a Josephson radiation comb generator (JRCG) based on an extended Josephson junction subject to a time dependent magnetic field. The junction critical current shows known diffraction patterns and determines the position of the critical nodes when it vanishes. When the magnetic flux passes through one of such critical nodes, the superconducting phase must undergo a… ▽ More We propose the implementation of a Josephson radiation comb generator (JRCG) based on an extended Josephson junction subject to a time dependent magnetic field. The junction critical current shows known diffraction patterns and determines the position of the critical nodes when it vanishes. When the magnetic flux passes through one of such critical nodes, the superconducting phase must undergo a $π$-jump to minimize the Josephson energy. Correspondingly a voltage pulse is generated at the extremes of the junction. Under periodic driving this allows us to produce a comb-like voltage pulses sequence. In the frequency domain it is possible to generate up to hundreds of harmonics of the fundamental driving frequency, thus mimicking the frequency comb used in optics and metrology. We discuss several implementations through a rectangular, cylindrical and annular junction geometries, allowing us to generate different radiation spectra and to produce an output power up to $10$~pW at $50$~GHz for a driving frequency of $100$~MHz. △ Less

Submitted 15 September, 2015; v1 submitted 25 February, 2015; originally announced February 2015.

Comments: 4+ pages, 4 color figures

Journal ref: J. Appl. Phys. 118, 113901 (2015)

Functional Integral approach to time-dependent heat exchange in open quantum systems: general method and applications

Authors: M. Carrega, P. Solinas, A. Braggio, M. Sassetti, U. Weiss

Abstract: We establish the path integral approach for the time-dependent heat exchange of an externally driven quantum system coupled to a thermal reservoir. We derive the relevant influence functional and present an exact formal expression for the moment generating functional which carries all statistical properties of the heat exchange process for general linear dissipation. The general method is applied… ▽ More We establish the path integral approach for the time-dependent heat exchange of an externally driven quantum system coupled to a thermal reservoir. We derive the relevant influence functional and present an exact formal expression for the moment generating functional which carries all statistical properties of the heat exchange process for general linear dissipation. The general method is applied to the time-dependent average heat transfer in the dissipative two-state system. We show that the heat can be written as a convolution integral which involves the population and coherence correlation functions of the two-state system and additional correlations due to a polarization of the reservoir. The corresponding expression can be solved in the weak-damping limit both for white noise and for quantum mechanical coloured noise. The implications of pure quantum effects are discussed. Altogether a complete description of the dynamics of the average heat transfer ranging from the classical regime down to zero temperature is achieved. △ Less

Submitted 22 December, 2014; originally announced December 2014.

Comments: 19 pages, 4 figures

Journal ref: New J. Phys. 17 (2015) 045030

A Josephson radiation comb generator

Authors: P. Solinas, S. Gasparinetti, D. Golubev, F. Giazotto

Abstract: We propose the implementation of a Josephson Radiation Comb Generator (JRCG) based on a dc superconducting quantum interference device (SQUID) driven by an external magnetic field. When the magnetic flux crosses a diffraction node of the critical current interference pattern, the superconducting phase undergoes a jump of $π$ and a voltage pulse is generated at the extremes of the SQUID. Under peri… ▽ More We propose the implementation of a Josephson Radiation Comb Generator (JRCG) based on a dc superconducting quantum interference device (SQUID) driven by an external magnetic field. When the magnetic flux crosses a diffraction node of the critical current interference pattern, the superconducting phase undergoes a jump of $π$ and a voltage pulse is generated at the extremes of the SQUID. Under periodic drive this allows one to generate a sequence of sharp, evenly spaced voltage pulses. In the frequency domain, this corresponds to a comb-like structure similar to the one exploited in optics and metrology. With this device it is possible to generate up to several hundreds of harmonics of the driving frequency. For example, a chain of $50$ identical high-critical-temperature SQUIDs driven at 1 GHz can deliver up to a $0.5$ nW at 200 GHz. The availability of a fully solid-state radiation comb generator such as the JRCG, easily integrable on chip, may pave the way to a number of technological applications, from metrology to sub-millimeter wave generation. △ Less

Submitted 1 July, 2015; v1 submitted 29 October, 2014; originally announced October 2014.

Comments: 9 pages, 6 color figures

Journal ref: Sci. Rep. 5, 12260 (2015)

Heat-exchange statistics in driven open quantum systems

Authors: S. Gasparinetti, P. Solinas, A. Braggio, M. Sassetti

Abstract: As the dimensions of physical systems approach the nanoscale, the laws of thermodynamics must be reconsidered due to the increased importance of fluctuations and quantum effects. While the statistical mechanics of small classical systems is relatively well understood, the quantum case still poses challenges. Here we set up a formalism that allows to calculate the full probability distribution of e… ▽ More As the dimensions of physical systems approach the nanoscale, the laws of thermodynamics must be reconsidered due to the increased importance of fluctuations and quantum effects. While the statistical mechanics of small classical systems is relatively well understood, the quantum case still poses challenges. Here we set up a formalism that allows to calculate the full probability distribution of energy exchanges between a periodically driven quantum system and a thermalized heat reservoir. The formalism combines Floquet theory with a generalized master equation approach. For a driven two-level system and in the long-time limit, we obtain a universal expression for the distribution, providing clear physical insight into the exchanged energy quanta. We illustrate our approach in two analytically solvable cases and discuss the differences in the corresponding distributions. Our predictions could be directly tested in a variety of systems, including optical cavities and solid-state devices. △ Less

Submitted 29 July, 2014; v1 submitted 14 April, 2014; originally announced April 2014.

Comments: 22 pages, 2 figures

Journal ref: New Journal of Physics 16 (2014) 115001

Moments of work in the two-point measurement protocol for a driven open quantum system

Authors: S. Suomela, P. Solinas, J. P. Pekola, J. Ankerhold, T. Ala-Nissila

Abstract: We study the distribution of work induced by the two-point measurement protocol for a driven open quantum system. We first derive a general form for the generating function of work for the total system, bearing in mind that the Hamiltonian does not necessarily commute with its time derivative. Using this result we then study the first few moments of work by using the master equation of the reduced… ▽ More We study the distribution of work induced by the two-point measurement protocol for a driven open quantum system. We first derive a general form for the generating function of work for the total system, bearing in mind that the Hamiltonian does not necessarily commute with its time derivative. Using this result we then study the first few moments of work by using the master equation of the reduced system, invoking approximations similar to the ones made in the microscopic derivation of the reduced density matrix. Our results show that, already in the third moment of work, correction terms appear that involve commutators between the Hamiltonian and its time derivative. To demonstrate the importance of these terms, we consider a sinusoidally, weakly driven and weakly coupled open two-level quantum system, and indeed find that already in the third moment of work the correction terms are significant. We also compare our results to those obtained with the quantum jump method and find a good agreement. △ Less

Submitted 30 September, 2014; v1 submitted 2 April, 2014; originally announced April 2014.

Comments: 9 pages, 3 figures

Journal ref: Phys. Rev. B 90, 094304 (2014)

Lamb shift enhancement and detection in strongly driven superconducting circuits

Authors: Vera Gramich, Simone Gasparinetti, Paolo Solinas, Joachim Ankerhold

Abstract: It is shown that strong driving of a quantum system substantially enhances the Lamb shift induced by broadband reservoirs which are typical for solid-state devices. By varying drive parameters the impact of environmental vacuum fluctuations with continuous spectral distribution onto system observables can be tuned in a distinctive way. This provides experimentally feasible measurement schemes for… ▽ More It is shown that strong driving of a quantum system substantially enhances the Lamb shift induced by broadband reservoirs which are typical for solid-state devices. By varying drive parameters the impact of environmental vacuum fluctuations with continuous spectral distribution onto system observables can be tuned in a distinctive way. This provides experimentally feasible measurement schemes for the Lamb shift in superconducting circuits based on Cooper pair boxes, where it can be detected either in shifted dressed transition frequencies or in pumped charge currents. △ Less

Submitted 6 May, 2014; v1 submitted 21 January, 2014; originally announced January 2014.

Comments: 5 pages, 4 figures + 4 pages supplemental material

Journal ref: Phys. Rev. Lett. 113, 027001 (2014)