-
Advanced magnon-optic effects with spin-wave leaky modes
Authors:
Krzysztof Sobucki,
Wojciech Śmigaj,
Piotr Graczyk,
Maciej Krawczyk,
and Paweł Gruszecki
Abstract:
We numerically demonstrate the excitation of leaky spin waves (SWs) guided along a ferromagnetic stripe by an obliquely incident SW beam on the thin film edge placed below the stripe. During propagation, leaky waves emit energy back to the layer in the form of plane waves and several laterally shifted parallel SW beams. This resonance excitation, combined with interference effects of the reflected…
▽ More
We numerically demonstrate the excitation of leaky spin waves (SWs) guided along a ferromagnetic stripe by an obliquely incident SW beam on the thin film edge placed below the stripe. During propagation, leaky waves emit energy back to the layer in the form of plane waves and several laterally shifted parallel SW beams. This resonance excitation, combined with interference effects of the reflected and re-emitted waves, results in the magnonic Woods anomaly and significant increase of the Goos-Hanchen shift magnitude. Hence, we provide a unique platform to control SW reflection and to transfer SWs from a 2D platform into the 1D guiding mode that can be used to form a transdimensional magnonic router.
△ Less
Submitted 4 July, 2023; v1 submitted 22 February, 2023;
originally announced February 2023.
-
A modal approach to modelling spin wave scattering
Authors:
Wojciech Śmigaj,
Krzysztof Sobucki,
Paweł Gruszecki,
Maciej Krawczyk
Abstract:
Efficient numerical methods are required for the design of optimised devices. In magnonics, the primary computational tool is micromagnetic simulations, which solve the Landau-Lifshitz equation discretised in time and space. However, their computational cost is high, and the complexity of their output hinders insight into the physics of the simulated system, especially in the case of multimode pro…
▽ More
Efficient numerical methods are required for the design of optimised devices. In magnonics, the primary computational tool is micromagnetic simulations, which solve the Landau-Lifshitz equation discretised in time and space. However, their computational cost is high, and the complexity of their output hinders insight into the physics of the simulated system, especially in the case of multimode propagating wave-based devices. We propose a finite-element modal method allowing an efficient solution of the scattering problem for dipole-exchange spin waves propagating perpendicularly to the magnetisation direction. The method gives direct access to the scattering matrix of the whole system and its components. We extend the formula for the power carried by a magnetostatic mode in the Damon-Eshbach configuration to the case with exchange, allowing the scattering coefficients to be normalised to represent the fraction of the input power transferred to each output channel. We apply the method to the analysis of spin-wave scattering on a basic functional block of magnonic circuits, consisting of a resonator dynamically coupled to a thin film. The results and the method are validated by comparison with micromagnetic simulations.
△ Less
Submitted 13 July, 2023; v1 submitted 26 November, 2021;
originally announced November 2021.
-
Resonant subwavelength control of the phase of spin waves reflected from a ferromagnetic film edge
Authors:
Krzysztof Sobucki,
Wojciech Śmigaj,
Justyna Rychły,
Maciej Krawczyk,
Paweł Gruszecki
Abstract:
Using frequency-domain finite element calculations cross-checked with micromagnetic simulations, we demonstrate that the phase of spin waves reflected from an interface between a permalloy film and a bilayer can be controlled by changing dimensions of the bilayer. Treating the bilayer formed by the permalloy film and a ferromagnetic stripe as a segment of a multi-mode waveguide, we show that spin-…
▽ More
Using frequency-domain finite element calculations cross-checked with micromagnetic simulations, we demonstrate that the phase of spin waves reflected from an interface between a permalloy film and a bilayer can be controlled by changing dimensions of the bilayer. Treating the bilayer formed by the permalloy film and a ferromagnetic stripe as a segment of a multi-mode waveguide, we show that spin-wave Fabry-Perot resonances of one of its modes are responsible for the high sensitivity of the phase of reflected waves to stripe width and the stripe-film separation. Thus, the system is a unique realization of a fully magnonic Gires-Tournois interferometer based on a two-modes resonator, which can be treated as a magnonic counterpart of a metasurface, since it enables manipulation of the phase of spin waves at subwavelength distances. Knowledge gained from these calculations might be used to design magnonic devices such as flat lenses or magnetic particle detectors.
△ Less
Submitted 22 September, 2020; v1 submitted 30 July, 2020;
originally announced July 2020.
-
Spin-wave phase inverter upon a single nanodefect
Authors:
O. V. Dobrovolskiy,
R. Sachser,
S. A. Bunyaev,
D. Navas,
V. M. Bevz,
M. Zelent,
W. Smigaj,
J. Rychly,
M. Krawczyk,
R. V. Vovk,
M. Huth,
G. N. Kakazei
Abstract:
Local modification of magnetic properties of nanoelements is a key to design future-generation magnonic devices, in which information is carried and processed via spin waves. One of the biggest challenges here is to fabricate simple and miniature phase-controlling elements with broad tunability. Here, we successfully realize such spin-wave phase shifter upon a single nanogroove milled by focused i…
▽ More
Local modification of magnetic properties of nanoelements is a key to design future-generation magnonic devices, in which information is carried and processed via spin waves. One of the biggest challenges here is to fabricate simple and miniature phase-controlling elements with broad tunability. Here, we successfully realize such spin-wave phase shifter upon a single nanogroove milled by focused ion beam in a Co-Fe microsized magnonic waveguide. By varying the groove depth and the in-plane bias magnetic field we continuously tune the spin-wave phase and experimentally evidence a complete phase inversion. The microscopic mechanism of the phase shift is based on the combined action of the nanogroove as a geometrical defect and the lower spin-wave group velocity in the waveguide under the groove where the magnetization is reduced due to the incorporation of Ga ions during the ion-beam milling. The proposed phase shifter can easily be on-chip integrated with spin-wave logic gates and other magnonic devices. Our findings are crucial for designing nano-magnonic circuits and for the development of spin-wave nano-optics.
△ Less
Submitted 11 February, 2019;
originally announced February 2019.
-
Product algebras for Galerkin discretisations of boundary integral operators and their applications
Authors:
Timo Betcke,
Matthew Scroggs,
Wojciech Smigaj
Abstract:
Operator products occur naturally in a range of regularized boundary integral equation formulations. However, while a Galerkin discretisation only depends on the domain space and the test (or dual) space of the operator, products require a notion of the range. In the boundary element software package Bempp we have implemented a complete operator algebra that depends on knowledge of the domain, ran…
▽ More
Operator products occur naturally in a range of regularized boundary integral equation formulations. However, while a Galerkin discretisation only depends on the domain space and the test (or dual) space of the operator, products require a notion of the range. In the boundary element software package Bempp we have implemented a complete operator algebra that depends on knowledge of the domain, range and test space. The aim was to develop a way of working with Galerkin operators in boundary element software that is as close to working with the strong form on paper as possible while hiding the complexities of Galerkin discretisations. In this paper, we demonstrate the implementation of this operator algebra and show, using various Laplace and Helmholtz example problems, how it significantly simplifies the definition and solution of a wide range of typical boundary integral equation problems.
△ Less
Submitted 28 November, 2017;
originally announced November 2017.
-
Software frameworks for integral equations in electromagnetic scattering based on Calderón identities
Authors:
Matthew Scroggs,
Timo Betcke,
Erik Burman,
Wojciech Śmigaj,
Elwin van 't Wout
Abstract:
In recent years there have been tremendous advances in the theoretical understanding of boundary integral equations for Maxwell problems. In particular, stable dual pairing of discretisation spaces have been developed that allow robust formulations of the preconditioned electric field, magnetic field and combined field integral equations. Within the BEM++ boundary element library we have developed…
▽ More
In recent years there have been tremendous advances in the theoretical understanding of boundary integral equations for Maxwell problems. In particular, stable dual pairing of discretisation spaces have been developed that allow robust formulations of the preconditioned electric field, magnetic field and combined field integral equations. Within the BEM++ boundary element library we have developed implementations of these frameworks that allow an intuitive formulation of the typical Maxwell boundary integral formulations within a few lines of code. The basis of these developments is an efficient and robust implementations of Calderón identities together with a product algebra that hides and automates most technicalities involved in assembling Galerkin boundary integral equations. In this paper we demonstrate this framework and use it to derive very simple and robust software formulations of the standard preconditioned electric field, magnetic field and regularised combined field integral equations for Maxwell.
△ Less
Submitted 31 March, 2017;
originally announced March 2017.
-
Overresolving in the Laplace domain for convolution quadrature methods
Authors:
T. Betcke,
N. Salles,
W. Śmigaj
Abstract:
Convolution quadrature (CQ) methods have enjoyed tremendous interest in recent years as an efficient tool for solving time-domain wave problems in unbounded domains via boundary integral equation techniques. In this paper we consider CQ type formulations for the parallel space-time evaluation of multistep or stiffly accurate Runge-Kutta rules for the wave equation. In particular, we decouple the n…
▽ More
Convolution quadrature (CQ) methods have enjoyed tremendous interest in recent years as an efficient tool for solving time-domain wave problems in unbounded domains via boundary integral equation techniques. In this paper we consider CQ type formulations for the parallel space-time evaluation of multistep or stiffly accurate Runge-Kutta rules for the wave equation. In particular, we decouple the number of Laplace domain solves from the number of time steps. This allows to overresolve in the Laplace domain by computing more Laplace domain solutions solutions than there are time steps. We use techniques from complex approximation theory to analyse the error of the CQ approximation of the underlying time-stepping rule when overresolving in the Laplace domain and show that the performance is intimately linked to the location of the poles of the solution operator. Several examples using boundary integral equation formulations in the Laplace domain are presented to illustrate the main results.
△ Less
Submitted 5 March, 2016;
originally announced March 2016.
-
Microwave excitation of spin wave beams in thin ferromagnetic films
Authors:
P. Gruszecki,
A. E. Serebryannikov,
W. Śmigaj,
M. Krawczyk
Abstract:
We present an approach enabling generation of narrow spin wave beams in thin homogeneous ferromagnetic films. The main idea is to match the wave vector of the spin wave with that corresponding to the spectral maximum of the exciting microwave magnetic field only locally, in the region of space from which the beam should be launched. We show that this can be achieved with the aid of a properly desi…
▽ More
We present an approach enabling generation of narrow spin wave beams in thin homogeneous ferromagnetic films. The main idea is to match the wave vector of the spin wave with that corresponding to the spectral maximum of the exciting microwave magnetic field only locally, in the region of space from which the beam should be launched. We show that this can be achieved with the aid of a properly designed coplanar waveguide transducer generating a nonuniform microwave magnetic field. The resulting two-dimensional spin wave beams obtained in micromagnetic simulations propagate over distances of several micrometers. The proposed approach requires neither inhomogeneity of the ferromagnetic film nor nonuniformity of the biasing magnetic field, and it can be generalized to yield multiple spin wave beams of different width at the same frequency. Other possible excitation scenarios and applications of spin wave beam magnonics are also discussed.
△ Less
Submitted 18 September, 2015; v1 submitted 16 September, 2015;
originally announced September 2015.
-
Photonic crystal carpet: Manipulating wave fronts in the near field at 1550 nm
Authors:
G. Scherrer,
M. Hofman,
W. Śmigaj,
M. Kadic,
T. -M. Chang,
X. Mélique,
D. Lippens,
O. Vanbésien,
B. Cluzel,
F. de Fornel,
S. Guenneau,
B. Gralak
Abstract:
Ground-plane cloaks, which transform a curved mirror into a flat one, and recently reported at wavelengths ranging from the optical to the visible spectrum, bring the realm of optical illusion a step closer to reality. However, all carpet-cloaking experiments have thus far been carried out in the far-field. Here, we demonstrate numerically and experimentally that a dielectric photonic crystal (PC)…
▽ More
Ground-plane cloaks, which transform a curved mirror into a flat one, and recently reported at wavelengths ranging from the optical to the visible spectrum, bring the realm of optical illusion a step closer to reality. However, all carpet-cloaking experiments have thus far been carried out in the far-field. Here, we demonstrate numerically and experimentally that a dielectric photonic crystal (PC) of a complex shape made of a honeycomb array of air holes can scatter waves in the near field like a PC with a at boundary at stop band frequencies. This mirage effect relies upon a specific arrangement of dielectric pillars placed at the nodes of a quasi-conformal grid dressing the PC. Our carpet is shown to work throughout the range of wavelengths 1500nm to 1650nm within the stop band extending from 1280 to 1940 nm. The device has been fabricated using a single- mask advanced nanoelectronics technique on III-V semiconductors and the near field measurements have been carried out in order to image the wave fronts's curvatures around the telecommunication wavelength 1550 nm.
△ Less
Submitted 20 March, 2013;
originally announced March 2013.
-
On the attenuation coefficient of monomode periodic waveguides
Authors:
Alexandre Baron,
Simon Mazoyer,
Wojciech Smigaj,
Philippe Lalanne
Abstract:
It is widely accepted that, on ensemble average, the transmission T of guided modes decays exponentially with the waveguide length L due to small imperfections, leading to the important figure of merit defined as the attenuation-rate coefficient alpha = -<ln(T)>/L. In this letter, we evidence that the exponential-damping law is not valid in general for periodic monomode waveguides, especially as t…
▽ More
It is widely accepted that, on ensemble average, the transmission T of guided modes decays exponentially with the waveguide length L due to small imperfections, leading to the important figure of merit defined as the attenuation-rate coefficient alpha = -<ln(T)>/L. In this letter, we evidence that the exponential-damping law is not valid in general for periodic monomode waveguides, especially as the group velocity decreases. This result that contradicts common beliefs and experimental practices aiming at measuring alpha is supported by a theoretical study of light transport in the limit of very small imperfections, and by numerical results obtained for two waveguide geometries that offer contrasted damping behaviours.
△ Less
Submitted 8 September, 2011;
originally announced September 2011.
-
Semi-analytical design of antireflection gratings for photonic crystals
Authors:
Wojciech Smigaj,
Boris Gralak
Abstract:
This article concerns the design of antireflection structures which, placed on a photonic crystal surface, significantly diminish the fraction of energy lost to reflected waves. After a review of the classes of these structures proposed to date, a new method is presented in detail for the design of antireflection gratings operating in a wide range of angles of incidence. The proposed algorithm is…
▽ More
This article concerns the design of antireflection structures which, placed on a photonic crystal surface, significantly diminish the fraction of energy lost to reflected waves. After a review of the classes of these structures proposed to date, a new method is presented in detail for the design of antireflection gratings operating in a wide range of angles of incidence. The proposed algorithm is illustrated by means of several examples, showing the advantages and limitations.
△ Less
Submitted 10 August, 2011;
originally announced August 2011.
-
Ultracompact optical circulator based on a uniformly magnetic magnetophotonic annular Bragg cavity
Authors:
Wojciech Śmigaj,
Liubov Magdenko,
Javier Romero-Vivas,
Sébastien Guenneau,
Béatrice Dagens,
Boris Gralak,
Mathias Vanwolleghem
Abstract:
We propose a new class of compact integrated optical circulators providing a large isolation level while maintaining a straightforward technological feasibility. Their layout is based on a nonreciprocal radial Bragg cavity composed of concentric magneto-optical rings. The circulator ports are standard rib waveguides, butt-coupled to the cavity by cutting through its outer rings. The device is spec…
▽ More
We propose a new class of compact integrated optical circulators providing a large isolation level while maintaining a straightforward technological feasibility. Their layout is based on a nonreciprocal radial Bragg cavity composed of concentric magneto-optical rings. The circulator ports are standard rib waveguides, butt-coupled to the cavity by cutting through its outer rings. The device is specifically designed for operation in a uniform external magnetic field. Using a coupled-mode description of the complete cavity/waveguide-port system, we explore the rich behaviour of cavity circulators in presence of varying levels of direct port-to-port coupling. We demonstrate numerically a strongly miniaturized two-dimensional cavity circulator, with a total footprint of less than $(10λ)^2$, achieving a 20-dB isolation level at telecom frequencies over a bandwidth of 130 GHz. The device is found to be very tolerant with respect to fabrication imperfections. We finish with an outlook on three-dimensional versions of the proposed nonreciprocal cavities.
△ Less
Submitted 16 May, 2011; v1 submitted 21 February, 2011;
originally announced February 2011.
-
Multiple-scattering method applied to gyrotropic media
Authors:
Wojciech Śmigaj,
Boris Gralak
Abstract:
We present an extension of the multiple-scattering calculational method to the case of gyrotropic media.
We present an extension of the multiple-scattering calculational method to the case of gyrotropic media.
△ Less
Submitted 14 September, 2009;
originally announced September 2009.
-
Unidirectional band gaps in uniformly magnetized two-dimensional magnetophotonic crystals
Authors:
Mathias Vanwolleghem,
Xavier Checoury,
Wojciech Śmigaj,
Boris Gralak,
Liubov Magdenko,
Kamil Postava,
Béatrice Dagens,
Pierre Beauvillain,
Jean-Michel Lourtioz
Abstract:
By exploiting the concepts of magnetic group theory we show how unidirectional behavior can be obtained in two-dimensional magneto-photonic crystals (MOPhC) with uniform magnetization. This group theory approach generalizes all previous investigations of one-way MOPhCs including those based on the use of antiparallel magnetic domains in the elementary crystal cell. Here, the theoretical approach…
▽ More
By exploiting the concepts of magnetic group theory we show how unidirectional behavior can be obtained in two-dimensional magneto-photonic crystals (MOPhC) with uniform magnetization. This group theory approach generalizes all previous investigations of one-way MOPhCs including those based on the use of antiparallel magnetic domains in the elementary crystal cell. Here, the theoretical approach is illustrated for one MOPhC example where unidirectional behavior is obtained by appropriately lowering the geometrical symmetry of the elementary motifs. One-way transmission is numerically demonstrated for a photonic crystal slice.
△ Less
Submitted 22 June, 2009;
originally announced June 2009.
-
Application of the multiple-scattering method to analysis of systems with semi-infinite photonic waveguides
Authors:
Wojciech Smigaj
Abstract:
We propose a technique of compensating the spurious reflections implied by the multiple-scattering (MS) method, commonly used for analyzing finite photonic crystal (PC) systems, to obtain exact values of characteristic parameters, such as reflection and transmission coefficients, of PC functional elements. Rather than a modification of the MS computational algorithm, our approach involves postpr…
▽ More
We propose a technique of compensating the spurious reflections implied by the multiple-scattering (MS) method, commonly used for analyzing finite photonic crystal (PC) systems, to obtain exact values of characteristic parameters, such as reflection and transmission coefficients, of PC functional elements. Rather than a modification of the MS computational algorithm, our approach involves postprocessing of results obtained by the MS method. We derive analytical formulas for the fields excited in a finite system, taking explicitly into account the spurious reflections occurring at the artificial system boundaries. The intrinsic parameters of the investigated functional element are found by fitting the results of MS simulations to those obtained from the formulas derived. Devices linked with one and two semi-infinite waveguides are analyzed explicitly; possible extensions of the formalism to more complex circuits are discussed as well. The accuracy of the proposed method is tested in a number of systems; the results of our calculations prove to be in good agreement with those obtained independently by other authors.
△ Less
Submitted 15 March, 2007;
originally announced March 2007.
-
Model of light collimation by photonic crystal surface modes
Authors:
Wojciech Smigaj
Abstract:
We propose a quantitative model explaining the mechanism of light collimation by leaky surface modes that propagate on a corrugated surface around the output of a photonic crystal waveguide. The dispersion relation of these modes is determined for a number of surface terminations. Analytical results obtained on the basis of the model are compared to those of rigorous numerical simulations. Maxim…
▽ More
We propose a quantitative model explaining the mechanism of light collimation by leaky surface modes that propagate on a corrugated surface around the output of a photonic crystal waveguide. The dispersion relation of these modes is determined for a number of surface terminations. Analytical results obtained on the basis of the model are compared to those of rigorous numerical simulations. Maximum collimation is shown to occur at frequency values corresponding to excitation of surface modes whose wave number retains a nonzero real part.
△ Less
Submitted 5 April, 2007; v1 submitted 27 December, 2006;
originally announced December 2006.
