Showing 1–50 of 50 results for author: Sengupta, J

Accelerating Tactile Internet with QUIC: A Security and Privacy Perspective

Authors: Jayasree Sengupta, Debasmita Dey, Simone Ferlin, Nirnay Ghosh, Vaibhav Bajpai

Abstract: The Tactile Internet paradigm is set to revolutionize human society by enabling skill-set delivery and haptic communication over ultra-reliable, low-latency networks. The emerging sixth-generation (6G) mobile communication systems are envisioned to underpin this Tactile Internet ecosystem at the network edge by providing ubiquitous global connectivity. However, apart from a multitude of opportunit… ▽ More The Tactile Internet paradigm is set to revolutionize human society by enabling skill-set delivery and haptic communication over ultra-reliable, low-latency networks. The emerging sixth-generation (6G) mobile communication systems are envisioned to underpin this Tactile Internet ecosystem at the network edge by providing ubiquitous global connectivity. However, apart from a multitude of opportunities of the Tactile Internet, security and privacy challenges emerge at the forefront. We believe that the recently standardized QUIC protocol, characterized by end-to-end encryption and reduced round-trip delay would serve as the backbone of Tactile Internet. In this article, we envision a futuristic scenario where a QUIC-enabled network uses the underlying 6G communication infrastructure to achieve the requirements for Tactile Internet. Interestingly this requires a deeper investigation of a wide range of security and privacy challenges in QUIC, that need to be mitigated for its adoption in Tactile Internet. Henceforth, this article reviews the existing security and privacy attacks in QUIC and their implication on users. Followed by that, we discuss state-of-the-art attack mitigation strategies and investigate some of their drawbacks with possible directions for future work △ Less

Submitted 31 January, 2024; v1 submitted 12 January, 2024; originally announced January 2024.

Comments: 7 pages, 3 figures, 1 table

Through the Lens of Google CrUX: Dissecting Web Browsing Experience Across Devices and Countries

Authors: Jayasree Sengupta, Tanya Shreedhar, Dinh Nguyen, Robert Kramer, Vaibhav Bajpai

Abstract: User quality of experience in the context of Web browsing is being researched widely, with plenty of developments occurring alongside technological advances, not seldom driven by big industry players. With the huge reach and infrastructure of Google, the Chrome User Experience Report (CrUX) provides quantitative real-life measurement data of a vast magnitude. Analysis of this steadily expanding da… ▽ More User quality of experience in the context of Web browsing is being researched widely, with plenty of developments occurring alongside technological advances, not seldom driven by big industry players. With the huge reach and infrastructure of Google, the Chrome User Experience Report (CrUX) provides quantitative real-life measurement data of a vast magnitude. Analysis of this steadily expanding dataset aggregating different user experience metrics, yields tangible insights into actual trends and developments. Hence, this paper is the first to study the CrUX dataset from the viewpoint of relevant metrics by quantitative evaluation of users Web browsing experience across three device types and nine European countries. Analysis of data segmented by connection type in the device dimension shows desktops outperforming other device types for all metrics. Similar analysis in the country dimension, shows North European countries (Sweden, Finland) having maximum 4G connections (85.99%, 81.41% respectively) and steadily performing 25%-36% better at the 75th percentile across all metrics compared to the worst performing country. Such a high-level longitudinal analysis of real-life Web browsing experience provides an extensive base for future research. △ Less

Submitted 18 April, 2024; v1 submitted 11 August, 2023; originally announced August 2023.

Comments: 9 pages, 6 figures and 1 table. Accepted for publication at 2024 IFIP Networking Conference

Evaluating DNS Resiliency and Responsiveness with Truncation, Fragmentation & DoTCP Fallback

Authors: Pratyush Dikshit, Mike Kosek, Nils Faulhaber, Jayasree Sengupta, Vaibhav Bajpai

Abstract: Since its introduction in 1987, the DNS has become one of the core components of the Internet. While it was designed to work with both TCP and UDP, DNS-over-UDP (DoUDP) has become the default option due to its low overhead. As new Resource Records were introduced, the sizes of DNS responses increased considerably. This expansion of message body has led to truncation and IP fragmentation more often… ▽ More Since its introduction in 1987, the DNS has become one of the core components of the Internet. While it was designed to work with both TCP and UDP, DNS-over-UDP (DoUDP) has become the default option due to its low overhead. As new Resource Records were introduced, the sizes of DNS responses increased considerably. This expansion of message body has led to truncation and IP fragmentation more often in recent years where large UDP responses make DNS an easy vector for amplifying denial-of-service attacks which can reduce the resiliency of DNS services. This paper investigates the resiliency, responsiveness, and usage of DoTCP and DoUDP over IPv4 and IPv6 for 10 widely used public DNS resolvers. In these experiments, these aspects are investigated from the edge and from the core of the Internet to represent the communication of the resolvers with DNS clients and authoritative name servers. Overall, more than 14M individual measurements from 2527 RIPE Atlas Probes have been analyzed, highlighting that most resolvers show similar resiliency for both DoTCP and DoUDP. While DNS Flag Day 2020 recommended 1232 bytes of buffer sizes yet we find out that 3 out of 10 resolvers mainly announce very large EDNS(0) buffer sizes both from the edge as well as from the core, which potentially causes fragmentation. In reaction to large response sizes from authoritative name servers, we find that resolvers do not fall back to the usage of DoTCP in many cases, bearing the risk of fragmented responses. As the message sizes in the DNS are expected to grow further, this problem will become more urgent in the future. △ Less

Submitted 12 July, 2023; originally announced July 2023.

Comments: 15 pages, 11 figures, 11 tables

On Cross-Layer Interactions of QUIC, Encrypted DNS and HTTP/3: Design, Evaluation and Dataset

Authors: Jayasree Sengupta, Mike Kosek, Justus Fries, Simone Ferlin, Pratyush Dikshit, Vaibhav Bajpai

Abstract: Every Web session involves a DNS resolution. While, in the last decade, we witnessed a promising trend towards an encrypted Web in general, DNS encryption has only recently gained traction with the standardisation of DNS over TLS (DoT) and DNS over HTTPS (DoH). Meanwhile, the rapid rise of QUIC deployment has now opened up an exciting opportunity to utilise the same protocol to not only encrypt We… ▽ More Every Web session involves a DNS resolution. While, in the last decade, we witnessed a promising trend towards an encrypted Web in general, DNS encryption has only recently gained traction with the standardisation of DNS over TLS (DoT) and DNS over HTTPS (DoH). Meanwhile, the rapid rise of QUIC deployment has now opened up an exciting opportunity to utilise the same protocol to not only encrypt Web communications, but also DNS. In this paper, we evaluate this benefit of using QUIC to coalesce name resolution via DNS over QUIC (DoQ), and Web content delivery via HTTP/3 (H3) with 0-RTT. We compare this scenario using several possible combinations where H3 is used in conjunction with DoH and DoQ, as well as the unencrypted DNS over UDP (DoUDP). We observe, that when using H3 1-RTT, page load times with DoH can get inflated by $>$30\% over fixed-line and by $>$50\% over mobile when compared to unencrypted DNS with DoUDP. However, this cost of encryption can be drastically reduced when encrypted connections are coalesced (DoQ + H3 0-RTT), thereby reducing the page load times by 1/3 over fixed-line and 1/2 over mobile, overall making connection coalescing with QUIC the best option for encrypted communication on the Internet. △ Less

Submitted 31 January, 2024; v1 submitted 20 June, 2023; originally announced June 2023.

Comments: 15 pages, 12 figures and 2 tables

A Cost-Effective Slag-based Mix Activated with Soda Ash and Hydrated Lime: A Pilot Study

Authors: Jayashree Sengupta, Nirjhar Dhang, Arghya Deb

Abstract: The present study explores a cost-effective method for using activated ground granulated blast furnace slag (GGBFS) and silica fume (SF) as cement substitutes. Instead of activating them with expensive alkali solutions, the present study employs industrial-grade powdered sodium aluminate (SA) and hydrated lime (HL) as activators, reducing expenses by about 94.5% compared to their corresponding ana… ▽ More The present study explores a cost-effective method for using activated ground granulated blast furnace slag (GGBFS) and silica fume (SF) as cement substitutes. Instead of activating them with expensive alkali solutions, the present study employs industrial-grade powdered sodium aluminate (SA) and hydrated lime (HL) as activators, reducing expenses by about 94.5% compared to their corresponding analytical-grade counterparts. Herein, the exclusivity is depicted using less pure chemicals rather than relying on reagents with 99% purity. Two mixing techniques are compared: one involves directly introducing powdered SA and HL, while the other pre-mixes SA with water before adding it to a dry powder mixture of GGBFS, SF, and HL. Microstructural analysis reveals that the initial strength results from various hydrate phases, including calcium-sodium-aluminate-silicate hydrate (CNASH). The latter strength is attributed to the coexistence of calcium-silicate hydrate (CSH), calcium-aluminate-silicate hydrate (CASH) and sodium-aluminate-silicate hydrate (NASH), with contributions from calcite and hydrotalcite. The SF content significantly influenced the formation of these gel phases. Thermogravimetric analysis (TGA) reveals phase transitions and bound water related to hydration products. The optimal mix comprises 10% SF, 90% GGBFS, 9.26% HL, and 13.25% SA, with a water-to-solids ratio of 0.45. This approach yields a compressive strength of 35.1 MPa after 28 days and 41.33 MPa after 120 days, hence suitable for structural construction. △ Less

Submitted 12 December, 2023; v1 submitted 20 May, 2023; originally announced May 2023.

FairShare: Blockchain Enabled Fair, Accountable and Secure Data Sharing for Industrial IoT

Authors: Jayasree Sengupta, Sushmita Ruj, Sipra Das Bit

Abstract: Industrial Internet of Things (IIoT) opens up a challenging research area towards improving secure data sharing which currently has several limitations. Primarily, the lack of inbuilt guarantees of honest behavior of participating, such as end-users or cloud behaving maliciously may result in disputes. Given such challenges, we propose a fair, accountable, and secure data sharing scheme,… ▽ More Industrial Internet of Things (IIoT) opens up a challenging research area towards improving secure data sharing which currently has several limitations. Primarily, the lack of inbuilt guarantees of honest behavior of participating, such as end-users or cloud behaving maliciously may result in disputes. Given such challenges, we propose a fair, accountable, and secure data sharing scheme, $\textit{FairShare}$ for IIoT. In this scheme, data collected from IoT devices are processed and stored in cloud servers with intermediate fog nodes facilitating computation. Authorized clients can access this data against some fee to make strategic decisions for improving the operational services of the IIoT system. By enabling blockchain, $\textit{FairShare}$ prevents fraudulent activities and thereby achieves fairness such that each party gets their rightful outcome in terms of data or penalty/rewards while simultaneously ensuring accountability of the services provided by the parties. Additionally, smart contracts are designed to act as a mediator during any dispute by enforcing payment settlement. Further, security and privacy of data are ensured by suitably applying cryptographic techniques like proxy re-encryption. We prove $\textit{FairShare}$ to be secure as long as at least one of the parties is honest. We validate $\textit{FairShare}$ with a theoretical overhead analysis. We also build a prototype in Ethereum to estimate performance and justify comparable results with a state-of-the-art scheme both via simulation and a realistic testbed setup. We observe an additional communication overhead of 256 bytes and a cost of deployment of 1.01 USD in Ethereum which are constant irrespective of file size. △ Less

Submitted 28 January, 2023; v1 submitted 23 January, 2023; originally announced January 2023.

Comments: 15 pages, 10 figures and 9 tables

Journal ref: IEEE Transactions on Network and Service Management, 25 January 2023

Recent Trends on Privacy-Preserving Technologies under Standardization at the IETF

Authors: Pratyush Dikshit, Jayasree Sengupta, Vaibhav Bajpai

Abstract: End-users are concerned about protecting the privacy of their sensitive personal data that are generated while working on information systems. This extends to both the data they actively provide including personal identification in exchange for products and services as well as its related metadata such as unnecessary access to their location. This is when certain privacy-preserving technologies co… ▽ More End-users are concerned about protecting the privacy of their sensitive personal data that are generated while working on information systems. This extends to both the data they actively provide including personal identification in exchange for products and services as well as its related metadata such as unnecessary access to their location. This is when certain privacy-preserving technologies come into a place where Internet Engineering Task Force (IETF) plays a major role in incorporating such technologies at the fundamental level. Thus, this paper offers an overview of the privacy-preserving mechanisms for layer 3 (i.e. IP) and above that are currently under standardization at the IETF. This includes encrypted DNS at layer 5 classified as DNS-over-TLS (DoT), DNS-over-HTTPS (DoH), and DNS-over-QUIC (DoQ) where the underlying technologies like QUIC belong to layer 4. Followed by that, we discuss Privacy Pass Protocol and its application in generating Private Access Tokens and Passkeys to replace passwords for authentication at the application layer (i.e. end-user devices). Lastly, to protect user privacy at the IP level, Private Relays and MASQUE are discussed. This aims to make designers, implementers, and users of the Internet aware of privacy-related design choices. △ Less

Submitted 18 June, 2023; v1 submitted 3 January, 2023; originally announced January 2023.

Comments: 9 pages, 5 figures, 1 table

The quantitative distribution of Hecke eigenvalues of Maass forms

Authors: Moni Kumari, Jyoti Sengupta

Abstract: Let $f$ be a normalized Hecke-Maass cusp form of weight zero for the group $SL_2(\mathbb Z)$. This article presents several quantitative results about the distribution of Hecke eigenvalues of $f$. Applications to the $Ω_{\pm}$-results for the Hecke eigenvalues of $f$ and its symmetric square sym$^2(f)$ are also given. Let $f$ be a normalized Hecke-Maass cusp form of weight zero for the group $SL_2(\mathbb Z)$. This article presents several quantitative results about the distribution of Hecke eigenvalues of $f$. Applications to the $Ω_{\pm}$-results for the Hecke eigenvalues of $f$ and its symmetric square sym$^2(f)$ are also given. △ Less

Submitted 24 June, 2022; originally announced June 2022.

Journal ref: Res. Number Theory, 2022

Prospective pathways of green graphene-based lab-on-chip devices: the pursuit toward sustainability

Authors: Joydip Sengupta, Chaudhery Mustansar Hussain

Abstract: At present, analytical lab-on-chip devices find their usage in different facets of chemical analysis, biological analysis, point of care analysis, biosensors, etc. In addition, graphene has already established itself as an essential component of advanced lab-on-chip devices. Graphene-based lab-on-chip devices have achieved appreciable admiration because of their peerless performance in comparison… ▽ More At present, analytical lab-on-chip devices find their usage in different facets of chemical analysis, biological analysis, point of care analysis, biosensors, etc. In addition, graphene has already established itself as an essential component of advanced lab-on-chip devices. Graphene-based lab-on-chip devices have achieved appreciable admiration because of their peerless performance in comparison to others. However, to accomplish a sustainable future a device must undergo Green-Screening to check its environmental compatibility. Thus, extensive research is carried out globally to make the graphene-based lab-on-chip green, though it is yet to be achieved. Nevertheless, as a ray of hope, there are few existing strategies that can be stitched together for feasible fabrication of environment-friendly green graphene-based analytical lab-on-chip, and those prospective pathways are reviewed in this paper. △ Less

Submitted 6 April, 2022; originally announced April 2022.

Comments: Lab-on-chip (LOC), Biodegradable material, Graphene, Green technology, Sustainability, Commercialization

Journal ref: Microchimica Acta (2022) 189, 177

SPRITE: A Scalable Privacy-Preserving and Verifiable Collaborative Learning for Industrial IoT

Authors: Jayasree Sengupta, Sushmita Ruj, Sipra Das Bit

Abstract: Recently collaborative learning is widely applied to model sensitive data generated in Industrial IoT (IIoT). It enables a large number of devices to collectively train a global model by collaborating with a server while keeping the datasets on their respective premises. However, existing approaches are limited by high overheads and may also suffer from falsified aggregated results returned by a m… ▽ More Recently collaborative learning is widely applied to model sensitive data generated in Industrial IoT (IIoT). It enables a large number of devices to collectively train a global model by collaborating with a server while keeping the datasets on their respective premises. However, existing approaches are limited by high overheads and may also suffer from falsified aggregated results returned by a malicious server. Hence, we propose a Scalable, Privacy-preserving and veRIfiable collaboraTive lEarning (SPRITE) algorithm to train linear and logistic regression models for IIoT. We aim to reduce burden from resource-constrained IIoT devices and trust dependence on cloud by introducing fog as a middleware. SPRITE employs threshold secret sharing to guarantee privacy-preservation and robustness to IIoT device dropout whereas verifiable additive homomorphic secret sharing to ensure verifiability during model aggregation. We prove the security of SPRITE in an honest-but-curious setting where the cloud is untrustworthy. We validate SPRITE to be scalable and lightweight through theoretical overhead analysis and extensive testbed experimentation on an IIoT use-case with two real-world industrial datasets. For a large-scale industrial setup, SPRITE records 65% and 55% improved performance over its competitor for linear and logistic regressions respectively while reducing communication overhead for an IIoT device by 90%. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Comments: Accepted for publication at The 22nd IEEE/ACM International Symposium on Cluster, Cloud and Internet Computing (CCGrid 2022). 5 figures and 6 tables

SACRIFICE: A Secure Road Condition Monitoring Scheme over Fog-based VANETs

Authors: Nishttha Sharma, Jayasree Sengupta, Sipra Das Bit

Abstract: With the rapid growth of Vehicular Ad-Hoc Networks (VANETs), huge amounts of road condition data are constantly being generated and sent to the cloud for processing. However, this introduces a significant load on the network bandwidth causing delay in the network and for a time-critical application like VANET such delay may have severe impact on real-time traffic management. This delay maybe reduc… ▽ More With the rapid growth of Vehicular Ad-Hoc Networks (VANETs), huge amounts of road condition data are constantly being generated and sent to the cloud for processing. However, this introduces a significant load on the network bandwidth causing delay in the network and for a time-critical application like VANET such delay may have severe impact on real-time traffic management. This delay maybe reduced by offloading some computational tasks to devices as close as possible to the vehicles. Further, security and privacy of vehicles is another important concern in such applications. Thus, this paper proposes a secure road condition monitoring scheme for fog-based vehicular networks. It considers Road-Side Units (RSUs) with computational capabilities, which act as intermediate fog nodes in between vehicles and cloud to reduce delay in decision making and thereby increases scalability. Apart from fulfilling basic security features, our scheme also supports advanced features like unlinkability and untraceability. A detailed security analysis proves that the proposed scheme can handle both internal and external adversaries. We also justify the efficiency of our scheme through theoretical overhead analysis. Finally, the scheme is simulated using an integrated SUMO and NS-3 platform to show its feasibility for practical implementations while not compromising on the network performance. The results show an average 80.96\% and 37.5\% improvement in execution time and end-to-end delay respectively while maintaining at par results for packet delivery ratio over a state-of-the-art scheme. △ Less

Submitted 23 November, 2021; originally announced November 2021.

Comments: 9 pages, 6 figures, 6 tables. Accepted at 14th International Conference on COMmunication Systems & NETworkS (COMSNETS 2022)

Toxicity of Carbon Nanomaterials

Authors: Arpita Adhikari, Joydip Sengupta

Abstract: The outstanding multidisciplinary applicability of nanomaterials has paved the path for the rapid advancement of nanoscience during the last few decades. Such technological progress subsequently results in an inevitable environmental exposure of nanomaterials. Presently, nanomaterials are employed in an extensive range of commercial products. Safe and sustainable incorporation of nanomaterials in… ▽ More The outstanding multidisciplinary applicability of nanomaterials has paved the path for the rapid advancement of nanoscience during the last few decades. Such technological progress subsequently results in an inevitable environmental exposure of nanomaterials. Presently, nanomaterials are employed in an extensive range of commercial products. Safe and sustainable incorporation of nanomaterials in industrial products requires a profound and comprehensive understanding of their potential toxicity. Among different nanomaterials, carbon nanomaterials marked its notable superiority toward the development of state-of-the-art nanotechnology due to the significant contribution of each of the carbon allotropes with varied dimensionality. The zero-dimensional fullerene, one-dimensional carbon nanotube, and two-dimensional graphene possess an exclusive combination of distinctive properties that are utilized in most of the nanotechnology-based products nowadays. However, potential risk factors are associated with the production and the use of carbon nanomaterials. Consequently, the number of studies regarding the assessment of the toxicity of these nanomaterials has increased rapidly in the past decade. This chapter will summarize the recent scientific efforts on the toxicity evaluation of different carbon nanomaterials. △ Less

Submitted 20 September, 2021; originally announced September 2021.

Comments: Toxicity; Carbon nanomaterials, Fullerene, Carbon nanotube, Graphene

Journal ref: In Environmental Applications of Carbon Nanomaterials-Based Devices (eds S. Mallakpour and C.M. Hussain)

Graphene-based analytical lab-on-chip devices for detection of viruses: A review

Authors: Joydip Sengupta, Arpita Adhikari, Chaudhery Mustansar Hussain

Abstract: Lab on a chip (LOC) device intakes fluid and makes it flow through the microchannels, to achieve rapid, highly sensitive and low-cost analysis with significant yield. Graphene has vast potential to be used in LOC devices owing to its remarkable and unique properties. A trustworthy, swift, inexpensive and facile detection scheme is of urgency due to the current situation of COVID-19 to break the ch… ▽ More Lab on a chip (LOC) device intakes fluid and makes it flow through the microchannels, to achieve rapid, highly sensitive and low-cost analysis with significant yield. Graphene has vast potential to be used in LOC devices owing to its remarkable and unique properties. A trustworthy, swift, inexpensive and facile detection scheme is of urgency due to the current situation of COVID-19 to break the chain of transmission and lab-on-chip based biosensor has materialized itself as a realistic solution for this purpose. The addition of Graphene has augmented the sensing capability of the LOC devices to a superior level. Recently, Graphene-based lab-on-chip type biosensor is effectively used for faithful detection of SARS-CoV-2 and this draws the attention of the researchers to review the recent progress in Graphene-based LOC platforms for detection of viruses and the same has been reviewed here. △ Less

Submitted 24 June, 2021; originally announced June 2021.

Comments: Graphene, Lab-on-chip, Biosensor, COVID-19, Virus detection, SARS-CoV-2

Journal ref: Carbon Trends, Volume 4, July 2021, 100072

Carbon Nanomaterials to Combat Virus: A perspective in view of COVID-19

Authors: Joydip Sengupta, Chaudhery Mustansar Hussain

Abstract: The rapid outbreaks of lethal viruses necessitate the development of novel antiviral substance. Besides the conventional antiviral substances, biocompatible nanomaterials also have significant potential in combating the virus at various stages of infection. Carbon nanomaterials have an impressive record against viruses and can deal with many crucial healthcare issues. In accordance with the publis… ▽ More The rapid outbreaks of lethal viruses necessitate the development of novel antiviral substance. Besides the conventional antiviral substances, biocompatible nanomaterials also have significant potential in combating the virus at various stages of infection. Carbon nanomaterials have an impressive record against viruses and can deal with many crucial healthcare issues. In accordance with the published literature, biocompatible carbon nanomaterials have a promising prospect as an antiviral substance. Subsequently, the antiviral properties of different carbon nanomaterials namely fullerene, carbon nanotube, carbon dot and graphene oxide have been reviewed. △ Less

Submitted 30 December, 2020; originally announced December 2020.

Comments: Keywords: Fullerene; Carbon nanotube; Carbon dot; Graphene oxide; Antiviral; COVID-19. Carbon Trends, 2020

Graphene-based field-effect transistor biosensors for the rapid detection and analysis of viruses: A perspective in view of COVID-19

Authors: Joydip Sengupta, Chaudhery Mustansar Hussain

Abstract: Current situation of COVID-19 demands a rapid, reliable, cost-effective, facile detection strategy to break the transmission chain and biosensor has emerged as a feasible solution for this purpose. Introduction of nanomaterials has undoubtedly improved the performance of biosensor and the addition of graphene enhanced the sensing ability to a peerless level. Amongst different graphene-based biosen… ▽ More Current situation of COVID-19 demands a rapid, reliable, cost-effective, facile detection strategy to break the transmission chain and biosensor has emerged as a feasible solution for this purpose. Introduction of nanomaterials has undoubtedly improved the performance of biosensor and the addition of graphene enhanced the sensing ability to a peerless level. Amongst different graphene-based biosensing schemes, graphene field-effect transistor marked its unique presence owing to its ability of ultrasensitive and low-noise detection thereby facilitating instantaneous measurements even in the presence of small amounts of analytes. Recently, graphene field-effect transistor type biosensor is even successfully employed in rapid detection of SARS-CoV-2 and this triggers the interest of the scientific community in reviewing the current developments in graphene field-effect transistor. Subsequently, in this article, the recent progress in graphene field-effect transistor type biosensors for the detection of the virus is reviewed and challenges along with their strengths are discussed. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: COVID-19, Biosensor, Graphene Field-effect transistor, Virus detection

Journal ref: Carbon Trends, 8 December 2020, 100011

LEADER: Low Overhead Rank Attack Detection for Securing RPL based IoT

Authors: Somnath Karmakar, Jayasree Sengupta, Sipra Das Bit

Abstract: In recent times researchers have found several security vulnerabilities in the Routing Protocol for Low power and Lossy network (RPL), amongst which rank attack is a predominant one causing detrimental effects on the network by creating a fake topology. To address this concern, we propose a low-overhead rank attack detection scheme for non-storing mode of RPL used in IoT to deal with both increase… ▽ More In recent times researchers have found several security vulnerabilities in the Routing Protocol for Low power and Lossy network (RPL), amongst which rank attack is a predominant one causing detrimental effects on the network by creating a fake topology. To address this concern, we propose a low-overhead rank attack detection scheme for non-storing mode of RPL used in IoT to deal with both increased and decreased rank attacks. Accordingly, we have modified the RPL Destination Oriented Directed Acyclic Graph (DODAG) formation algorithm to detect rank attacks during topology formation and maintenance. The distributed module of the algorithm runs in all the participating nodes whereas the centralized module runs in the sink. Unlike many existing schemes, instead of sending additional control message, we make the scheme low-overhead by simply modifying the DAO control message. Additionally, a lightweight Message Authentication Code (HMAC-LOCHA) is used to verify the integrity and authenticity of the control messages exchanged between nodes and the sink. The correctness of the proposed scheme is established through a concrete proof using multiple test case scenarios. Finally, the performance of the proposed scheme is evaluated both theoretically and through simulation in Contiki-based Cooja simulator. Theoretical evaluation proves the energy efficiency of the scheme. Simulation results show that our scheme outperforms over a state-of-the-art rank attack detection scheme in terms of detection accuracy, false positive or negative rate and energy consumption while also keeping acceptable network performance such as improved detection latency and at par packet delivery ratio. △ Less

Submitted 25 November, 2020; originally announced November 2020.

Comments: 9 pages, 9 figures, 4 tables. Accepted at 13th International Conference on COMmunication Systems & NETworkS (COMSNETS 2021)

A Secure Fog Based Architecture for Industrial Internet of Things and Industry 4.0

Authors: Jayasree Sengupta, Sushmita Ruj, Sipra Das Bit

Abstract: The advent of Industrial IoT (IIoT) along with Cloud computing has brought a huge paradigm shift in manufacturing industries resulting in yet another industrial revolution, Industry 4.0. Huge amounts of delay-sensitive data of diverse nature are being generated which needs to be locally processed and secured due to its sensitivity. But, the low-end IoT devices are unable to handle huge computation… ▽ More The advent of Industrial IoT (IIoT) along with Cloud computing has brought a huge paradigm shift in manufacturing industries resulting in yet another industrial revolution, Industry 4.0. Huge amounts of delay-sensitive data of diverse nature are being generated which needs to be locally processed and secured due to its sensitivity. But, the low-end IoT devices are unable to handle huge computational overheads. Also, the semi-trusted nature of Cloud introduces several security concerns. To address these issues, this work proposes a secure Fog-based IIoT architecture by suitably plugging a number of security features into it and by offloading some of the tasks judiciously to fog nodes. These features secure the system alongside reducing the trust and burden on the cloud and resource-constrained devices respectively. We validate our proposed architecture through both theoretical overhead analysis and practical experimentation including simulation study and testbed implementation. △ Less

Submitted 14 May, 2020; originally announced May 2020.

Comments: 11 pages, 7 figures, 8 tables, Accepted at IEEE Transactions on Industrial Informatics but not published online yet, so didn't receive DOI

Effect of growth temperature on the CVD grown Fe filled multi-walled carbon nanotubes using a modified photoresist

Authors: Joydip Sengupta, Avijit Jana, N. D. Pradeep Singh, Chacko Jacob

Abstract: Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron acetylacetonate with a conventional photoresist and the effect of growth temperature from 550 to 950 °C on Fe filled nanotubes has been studied. Scanning electron microscopy results show that, as the growth temperature increases from 550 to 950 °C, the average diameter of th… ▽ More Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron acetylacetonate with a conventional photoresist and the effect of growth temperature from 550 to 950 °C on Fe filled nanotubes has been studied. Scanning electron microscopy results show that, as the growth temperature increases from 550 to 950 °C, the average diameter of the nanotubes increases while their number density decreases. High resolution transmission electron microscopy along with energy dispersive X-ray investigation shows that the nanotubes have a multi-walled structure with partial Fe filling for all growth temperatures. The graphitic nature of the nanotubes was observed via X-ray diffraction pattern. Raman analysis demonstrates that the degree of graphitization of the carbon nanotubes depends upon the growth temperature. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: A. Nanostructures B. Vapor deposition C. Electron microscopy C. Raman spectroscopy C. X-ray diffraction

Journal ref: Materials Research Bulletin, Volume 45, Issue 9, September 2010, Pages 1189-1193

Pre-heating effect on the catalytic growth of partially filled carbon nanotubes by chemical vapor deposition

Authors: Joydip Sengupta, Chacko Jacob

Abstract: The surface reconstruction of the Fe catalyst films due to high temperature processing in hydrogen prior to nanotube nucleation and its effect on the growth morphologies of partially filled carbon nanotubes (CNTs) synthesized using atmospheric pressure chemical vapor deposition (APCVD) of propane was investigated. Results show that pre-heating of the catalyst film deeply influences the particle si… ▽ More The surface reconstruction of the Fe catalyst films due to high temperature processing in hydrogen prior to nanotube nucleation and its effect on the growth morphologies of partially filled carbon nanotubes (CNTs) synthesized using atmospheric pressure chemical vapor deposition (APCVD) of propane was investigated. Results show that pre-heating of the catalyst film deeply influences the particle size distribution, which governs the growth morphologies of the corresponding CNTs. The distribution of the catalyst particles over the Si substrate was analyzed before and after the heat treatment by atomic force microscopy (AFM) which reveals that heat treatment causes clusters of catalyst to coalesce and form macroscopic islands. The X-ray diffraction (XRD) pattern of the grown material indicates that they are graphitic in nature. Scanning electron microscopy (SEM) analysis suggested that the growth density strongly depends on the pre heat treatment of the Fe catalyst film. Multiwalled CNTs with partial catalyst filling were observed via high-resolution transmission electron microscopy (HRTEM) measurements. The degree of graphitization of the CNTs also depends on the pre heating as demonstrated by Raman analysis. A simple model for the growth of partially catalyst filled nanotubes is proposed. △ Less

Submitted 22 April, 2020; originally announced April 2020.

Comments: APCVD; Catalyzed growth; Partially filled CNT; RAMAN Spectroscopy. arXiv admin note: text overlap with arXiv:1908.00391, arXiv:1906.00167

Journal ref: Journal of Nanoscience and Nanotechnology, Volume 10, Number 5, May 2010, pp. 3064-3071(8)

Application of carbon nanomaterials in the electronic industry

Authors: Joydip Sengupta

Abstract: Nanomaterials have much improved properties compared to their bulk counterparts, which promotes them as ideal material for applications in various industries. Among the various nanomaterials, different nanoallotropes of carbon, namely fullerene, carbon nanotubes, and graphene, are the most important as indicated by the fact that their discoverers gained prestigious awards such as Nobel Prize or Ka… ▽ More Nanomaterials have much improved properties compared to their bulk counterparts, which promotes them as ideal material for applications in various industries. Among the various nanomaterials, different nanoallotropes of carbon, namely fullerene, carbon nanotubes, and graphene, are the most important as indicated by the fact that their discoverers gained prestigious awards such as Nobel Prize or Kavli Prize. Carbon forms different nano-allotropes by varying the nature of orbital hybridization. Since all nanoallotropes of carbon possess exotic physical and chemical properties, they are extensively used in different applications, especially in the electronic industry. △ Less

Submitted 24 April, 2020; originally announced April 2020.

Comments: Carbon nanomaterialsfullerenecarbon nanotubegraphene

Journal ref: Handbook of Nanomaterials for Manufacturing Applications, Micro and Nano Technologies, Elsevier, 2020, 421-50

The first simultaneous sign change for Fourier coefficients of Hecke-Maass forms

Authors: Moni Kumari, Jyoti Sengupta

Abstract: Let $f$ and $g$ be two Hecke-Maass cusp forms of weight zero for $SL_2(\mathbb Z)$ with Laplacian eigenvalues $\frac{1}{4}+u^2$ and $\frac{1}{4}+v^2$, respectively. Then both have real Fourier coefficients say, $λ_f(n)$ and $λ_g(n)$, and we may normalize $f$ and $g$ so that $λ_f(1)=1=λ_g(1)$. In this article, we first prove that the sequence $\{λ_f(n)λ_g(n)\}_{n \in \mathbb{N}}$ has infinitely man… ▽ More Let $f$ and $g$ be two Hecke-Maass cusp forms of weight zero for $SL_2(\mathbb Z)$ with Laplacian eigenvalues $\frac{1}{4}+u^2$ and $\frac{1}{4}+v^2$, respectively. Then both have real Fourier coefficients say, $λ_f(n)$ and $λ_g(n)$, and we may normalize $f$ and $g$ so that $λ_f(1)=1=λ_g(1)$. In this article, we first prove that the sequence $\{λ_f(n)λ_g(n)\}_{n \in \mathbb{N}}$ has infinitely many sign changes. Then we derive a bound for the first negative coefficient for the same sequence in terms of the Laplacian eigenvalues of $f$ and $g$. △ Less

Submitted 14 March, 2020; originally announced March 2020.

Comments: To appear in the Ramanujan Journal

MSC Class: Primary 11F41; Secondary 11F30

Different Synthesis Routes of Graphene-Based Metal Nanocomposites

Authors: Joydip Sengupta

Abstract: Nanocomposite material proves to be the best candidate to match todays technological need as fascinating properties can be achieved by combining two or more nanomaterials. Among various nanomaterials, graphene is able to stand out far ahead of all others because of its novel structure and exclusive characteristics. In particular, graphene metal nanocomposites have attracted enormous interest for t… ▽ More Nanocomposite material proves to be the best candidate to match todays technological need as fascinating properties can be achieved by combining two or more nanomaterials. Among various nanomaterials, graphene is able to stand out far ahead of all others because of its novel structure and exclusive characteristics. In particular, graphene metal nanocomposites have attracted enormous interest for their prospective use in various fields, including electronics and electrical and energy related areas. However, for the utmost use of potential of graphene, it has to be homogenously embedded into metal matrices. Thus, appropriate synthesis route is decisive to obtain graphene metal nanocomposites with desired properties. This chapter will summarize the different synthesis routes of high quality graphene metal nanocomposites along with their current developments. △ Less

Submitted 5 November, 2019; originally announced November 2019.

Comments: Graphene; Nanocomposite; Solution mixing; Sol-gel; Hydrothermal; Solvothermal; Self-assembly; Microwave irradiation; Ball milling; Electrochemical deposition

Journal ref: Handbook of Polymer and Ceramic Nanotechnology, Springer, (2019)

Well-Ordered "Ripple-Shaped" Microstructures of Mn Thin Films on GaAs Substrates

Authors: Anupama Chanda, Joydip Sengupta, Chacko Jacob

Abstract: This study was aimed to investigate the thickness dependent morphological changes of Mn films deposited on GaAs substrates by thermal evaporation technique. Ni films were deposited under same conditions to perform comparative study of the morphological changes with respect to the Mn films. The scanning electron microscopy and atomic force microscopy studies revealed ripple-shaped structure of Mn f… ▽ More This study was aimed to investigate the thickness dependent morphological changes of Mn films deposited on GaAs substrates by thermal evaporation technique. Ni films were deposited under same conditions to perform comparative study of the morphological changes with respect to the Mn films. The scanning electron microscopy and atomic force microscopy studies revealed ripple-shaped structure of Mn film with good periodicity, while Ni film only exhibited small granules deposited throughout the surface. The influence of the thickness of the Mn film in producing the ripple structure was clearly observed. In addition, the annealing time was considered as the major parameter to control the ordering of the ripple structure. X-ray diffraction pattern indicated the formation of different phases of Ga-Mn and Mn-As due to diffusion of atoms during annealing. A model for the creation of stress-driven microstructure is proposed which indicates that Mn thin films grow on GaAs substrates in three stages: in the primary stage, the growth occurs via two-dimensional nucleation process; as the thickness increases, the stress is released by the film via creation of additional surface roughness which produce ripples; and finally an island-like growth occurs because of the non-uniform distribution of stress along the surface of the film. △ Less

Submitted 4 November, 2019; originally announced November 2019.

Comments: Annealing; Atomic Force Microscopy; Manganese; Morphology; Scanning Electron Microscopy; Stress

Journal ref: Advanced Science, Engineering and Medicine, Volume 11, Number 11, November 2019, pp. 1142-1147(6)

Graphene and its derivatives for Analytical Lab on Chip platforms

Authors: Joydip Sengupta, Chaudhery Mustansar Hussain

Abstract: Since last decade, graphene has materialized itself as one of the phenomenal materials to modern researchers because of its remarkable thermal, optical, electronic, and mechanical properties. Graphene holds enormous potentials for lab on chip (LOC) devices and can provide diverse fabrication routes and structural features due to their special electronic and electrochemical properties. A LOC device… ▽ More Since last decade, graphene has materialized itself as one of the phenomenal materials to modern researchers because of its remarkable thermal, optical, electronic, and mechanical properties. Graphene holds enormous potentials for lab on chip (LOC) devices and can provide diverse fabrication routes and structural features due to their special electronic and electrochemical properties. A LOC device can manipulate fluids using microchannels and chamber structures, to accomplish fast, highly sensitive and inexpensive analysis with high yield. Hence, the graphene based LOC devices can constitute a well-controlled microenvironment for both advanced chemical/biological evaluation and low-cost point-of-care analysis etc. This review critically debates the graphene as a prime candidate for microfluidic devices and their future applicability towards various practical applications. Finally, the opportunities and challenges for the future of graphene with respect to their commercial challenges and sustainability perspectives are discussed. △ Less

Submitted 10 September, 2019; originally announced October 2019.

Comments: Graphene, Lab-on-chip, Microchannels, Chamber structures, Commercial challenge, sustainable perceptions

Journal ref: TrAC Trends in Analytical Chemistry Volume 114, May 2019, Pages 326-337

Substrate free synthesis of graphene nanoflakes by atmospheric pressure chemical vapour deposition using Ni powder as a catalyst

Authors: Joydip Sengupta, Kaustuv Das, U N Nandi, Chacko Jacob

Abstract: Graphene nanoflakes (GNFs) were synthesized by atmospheric pressure chemical vapour deposition of propane (C3H8) employing Ni (salen) powder without the introduction of a substrate. The graphitic nature of the GNFs was examined by an X-ray diffraction method. Scanning electron microscopy results revealed that GNFs were stacked on top of one another and had a high aspect ratio. Transmission electro… ▽ More Graphene nanoflakes (GNFs) were synthesized by atmospheric pressure chemical vapour deposition of propane (C3H8) employing Ni (salen) powder without the introduction of a substrate. The graphitic nature of the GNFs was examined by an X-ray diffraction method. Scanning electron microscopy results revealed that GNFs were stacked on top of one another and had a high aspect ratio. Transmission electron microscopy studies suggested that the GNFs were made up of a number of crystalline graphene layers, some of which were even single crystalline as evident from the selected area diffraction pattern. Finally, Raman spectroscopy confirmed the high quality of the GNFs. △ Less

Submitted 9 September, 2019; originally announced September 2019.

Comments: Graphene nanoflakes, chemical vapour deposition, X-ray diffraction, electron microscopy, Raman spectroscopy

Journal ref: Bull Mater Sci (2019) 42: 136

Structural and optical properties of post annealed Mg doped ZnO thin films deposited by the sol gel method

Authors: Joydip Sengupta, Arifeen Ahmed, Rini Labar

Abstract: Thin films of magnesium doped zinc oxide (MZO) were synthesized using the sol gel method and annealed at different temperatures under ambient condition. The morphological properties of the post annealed MZO films were investigated using X ray diffraction (XRD) while atomic force microscopy (AFM) was employed to probe the topographical alteration of the films. The optical properties of the post ann… ▽ More Thin films of magnesium doped zinc oxide (MZO) were synthesized using the sol gel method and annealed at different temperatures under ambient condition. The morphological properties of the post annealed MZO films were investigated using X ray diffraction (XRD) while atomic force microscopy (AFM) was employed to probe the topographical alteration of the films. The optical properties of the post annealed MZO films were examined by UV visible spectroscopy and the Tauc method was used to estimate the optical band gap. The studies revealed that, with the rise of annealing temperature the crystallinity and the surface roughness of the MZO films were increased whereas the optical transmittance and the energy bandgap were decreased. △ Less

Submitted 6 September, 2019; originally announced September 2019.

Comments: Annealing, Atomic force microscopy, MZO thin film, Optical materials and properties, Sol gel preparation, X-ray diffraction

Journal ref: Materials Letters Volume 109, 15 October 2013, Pages 265-268

Effect of annealing on the structural, topographical and optical properties of sol gel derived ZnO and AZO thin films

Authors: Joydip Sengupta, R. K. Sahoo, C. D. Mukherjee

Abstract: A comparative study of the physical properties of undoped Zinc Oxide (ZnO) and Al doped Zinc Oxide (AZO) thin films were performed as a function of annealing temperature. The structural properties were analyzed using X-ray diffraction and the recorded patterns indicated that the crystallinity of the films always enhanced with increasing annealing temperature while it degrades with Al doping. The t… ▽ More A comparative study of the physical properties of undoped Zinc Oxide (ZnO) and Al doped Zinc Oxide (AZO) thin films were performed as a function of annealing temperature. The structural properties were analyzed using X-ray diffraction and the recorded patterns indicated that the crystallinity of the films always enhanced with increasing annealing temperature while it degrades with Al doping. The topographical modification of the films due to heat treatment was examined by atomic force microscopy which revealed that annealing roughened the surface of all the films; however the AZO films always exhibited smoother morphology than ZnO. Study of the optical properties by UV-Visible spectrophotometer demonstrated that the transmittance was gradually diminished with the rise in annealing temperature. In addition, a notable increase in the optical band gap was also observed for the AZO films. △ Less

Submitted 4 September, 2019; originally announced September 2019.

Comments: AZO thin film; Sol gel preparation; Annealing; X ray diffraction; Atomic force microscopy;Optical properties. arXiv admin note: text overlap with arXiv:1908.05886

Journal ref: Materials Letters Volume 83, 15 September 2012, Pages 84-87

Carbon Nanotube Fabrication at Industrial Scale: Opportunities and Challenges

Authors: Joydip Sengupta

Abstract: Careful research on different materials reveals that the material properties are mostly affected by the size of it. Material size down to nanometer scale exhibits some remarkable properties, resulting in unique physical and chemical characteristics. In todays world of nanotechnology, carbon nanotubes (CNTs) have become a high priority material because of their exclusive structure, novel characteri… ▽ More Careful research on different materials reveals that the material properties are mostly affected by the size of it. Material size down to nanometer scale exhibits some remarkable properties, resulting in unique physical and chemical characteristics. In todays world of nanotechnology, carbon nanotubes (CNTs) have become a high priority material because of their exclusive structure, novel characteristics with enormous potential in many technological applications. Till date chemical vapor deposition (CVD) is the preferred and widely used technique among different CNT growth methods, because of its potential advantage to produce CNTs of high purity, large yield with ease of scale up and low setup cost. This article provides an overview of different CVD methods for industrial scale fabrication of CNTs. The influence of material aspect, viz. catalyst type, catalyst support, and growth control aspect, viz. process temperature, pressure, catalyst concentration, are discussed. Additionally, possible growth mechanisms concerning CNT formation are described. Finally, the key challenges of the process are addressed with future perspective. △ Less

Submitted 27 August, 2019; originally announced September 2019.

Comments: carbon nanotubes, chemical vapor deposition

Journal ref: Handbook of Nanomaterials for Industrial Applications, Micro and Nano Technologies,2018, Pages 172-194

Influence of annealing temperature on the structural, topographical and optical properties of sol gel derived ZnO thin films

Authors: Joydip Sengupta, R. K. Sahoo, K. K. Bardhan, C. D. Mukherjee

Abstract: This investigation deals with the effect of annealing temperature on the structural, topographical and optical properties of Zinc Oxide thin films prepared by sol gel method. The structural properties were studied using X-ray diffraction and the recorded patterns indicated that all the films had a preferred orientation along (002) plane and the crystallinity along with the grain size were augmente… ▽ More This investigation deals with the effect of annealing temperature on the structural, topographical and optical properties of Zinc Oxide thin films prepared by sol gel method. The structural properties were studied using X-ray diffraction and the recorded patterns indicated that all the films had a preferred orientation along (002) plane and the crystallinity along with the grain size were augmented with annealing temperature. The topographical modification of the films due to heat treatment was probed by atomic force microscopy which revealed that annealing roughened the surface of the film. The optical properties were examined by a UV visible spectrophotometer which exhibited that maximum transmittance reached nearly 90% and it diminished with increasing annealing temperature. △ Less

Submitted 16 August, 2019; originally announced August 2019.

Comments: Zinc oxide thin film, Sol gel preparation, Annealing X ray diffraction, Atomic force microscopy, Optical properties

Journal ref: Materials Letters Volume 65, Issues 17_18, September 2011, Pages 2572_2574

Site selective synthesis of in situ Ni filled multiwalled carbon nanotubes using Ni(salen) as a catalyst source

Authors: Joydip Sengupta, Avijit Jana, N D Pradeep Singh, C Mitra, Chacko Jacob

Abstract: The synthesis of Ni filled multiwalled carbon nanotubes was performed by atmospheric pressure chemical vapor deposition with propane on Si at 850 C using a simple mixture of Ni(salen), and a conventional photoresist. Analysis of the carbon nanotubes using scanning electron microscopy together with high resolution transmission electron microscopy show that the nanotubes have grown by a tip growth m… ▽ More The synthesis of Ni filled multiwalled carbon nanotubes was performed by atmospheric pressure chemical vapor deposition with propane on Si at 850 C using a simple mixture of Ni(salen), and a conventional photoresist. Analysis of the carbon nanotubes using scanning electron microscopy together with high resolution transmission electron microscopy show that the nanotubes have grown by a tip growth mechanism and exhibit a multi walled structure with partial Ni filling. The high quality of the Ni filled nanotubes is evidenced by Raman spectroscopy. The magnetic properties of Ni filled nanotubes were analyzed using a superconducting quantum interference device which revealed their ferromagnetic behavior with large coercivity. A scalable as well as site selective growth of high quality Ni filled carbon nanotubes is achieved by a simple photolithographic method. △ Less

Submitted 13 August, 2019; originally announced August 2019.

Comments: multiwalled carbon nanotubes,chemical vapor deposition,Ni(salen),photoresist,magnetic properties,coercivity

Journal ref: Nanotechnology, 2010, Volume 21, Number 41, pp 415605

Lithographically defined site-selective growth of Fe filled multi-walled carbon nanotubes using a modified photoresist

Authors: Joydip Sengupta, Avijit Jana, N. D. Pradeep Singh, Chacko Jacob

Abstract: Partially Fe filled multi-walled carbon nanotubes (MWCNTs) were grown by chemical vapor deposition with propane at 850 °C using a simple mixture of iron (III) acetylacetonate (Fe(acac)3) powder and conventional photoresist. Scanning electron microscopy revealed that catalytic nanoparticles with an average diameter of 70 nm are formed on the Si substrate which governs the diameter of the MWCNTs. Tr… ▽ More Partially Fe filled multi-walled carbon nanotubes (MWCNTs) were grown by chemical vapor deposition with propane at 850 °C using a simple mixture of iron (III) acetylacetonate (Fe(acac)3) powder and conventional photoresist. Scanning electron microscopy revealed that catalytic nanoparticles with an average diameter of 70 nm are formed on the Si substrate which governs the diameter of the MWCNTs. Transmission electron microscopy shows that the nanotubes have a multi-walled structure with partial Fe filling. A site-selective growth of partially Fe filled MWCNTs is achieved by a simple photolithographic route. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: Filled CNT, CVD, Partial filling, Photolithography

Journal ref: Carbon, Volume 48, Issue 8, July 2010, Pages 2371-2375

Growth temperature dependence of partially Fe filled MWCNT using chemical vapor deposition

Authors: Joydip Sengupta, Chacko Jacob

Abstract: This investigation deals with the effect of growth temperature on the growth behavior of Fe filled multiwalled carbon nanotubes (MWCNTs). Carbon nanotube (CNT) synthesis was carried out in a thermal chemical vapor deposition (CVD) reactor in the temperature range 650 to 950 1C using propane as the carbon source, Fe as the catalyst material, and Si as the catalyst support. Atomic force microscopy (… ▽ More This investigation deals with the effect of growth temperature on the growth behavior of Fe filled multiwalled carbon nanotubes (MWCNTs). Carbon nanotube (CNT) synthesis was carried out in a thermal chemical vapor deposition (CVD) reactor in the temperature range 650 to 950 1C using propane as the carbon source, Fe as the catalyst material, and Si as the catalyst support. Atomic force microscopy (AFM) analysis of the catalyst exhibits that at elevated temperature clusters of catalyst coalesce and form macroscopic islands. Field emission scanning electron microscopy (FESEM) results show that with increased growth temperature the average diameter of the nanotubes increases but their density decreases. High-resolution transmission electron microscopy (HRTEM) studies suggest that the nanotubes have multi-walled structure with partial Fe filling for all growth temperatures. The X-ray diffraction (XRD) pattern of the grown materials indicates that they are graphitic in nature. The characterization of nanotubes by Raman spectroscopy reveals that the optimized growth temperature for Fe filled CNTs is 850 1C, in terms of quality. A simple model for the growth of Fe filled carbon nanotubes is proposed. △ Less

Submitted 2 August, 2019; originally announced August 2019.

Comments: A1. Nanostructure A1. Growth model A1. Characterization A3. Chemical vapor deposition process B1. Carbon nanotube B1. Iron

Journal ref: Journal of Crystal Growth, Volume 311, Issues 23_24, 1 December 2009, Pages 4692_4697

The effect of Fe and Ni catalysts on the growth of multiwalled carbon nanotubes using chemical vapor deposition

Authors: J. Sengupta, C. Jacob

Abstract: The effect of Fe and Ni catalysts on the synthesis of carbon nanotubes (CNTs) using atmospheric pressure chemical vapor deposition (APCVD) was investigated. Field emission scanning electron microscopy (FESEM) analysis suggests that the samples grow through a tip growth mechanism. High-resolution transmission electron microscopy (HRTEM) measurements show multiwalled carbon nanotubes (MWCNTs) with b… ▽ More The effect of Fe and Ni catalysts on the synthesis of carbon nanotubes (CNTs) using atmospheric pressure chemical vapor deposition (APCVD) was investigated. Field emission scanning electron microscopy (FESEM) analysis suggests that the samples grow through a tip growth mechanism. High-resolution transmission electron microscopy (HRTEM) measurements show multiwalled carbon nanotubes (MWCNTs) with bamboo structure for Ni catalyst while iron filled straight tubes were obtained with the Fe catalyst. The X-ray diffraction (XRD) pattern indicates that nanotubes are graphitic in nature and there is no trace of carbide phases in both the cases. Low frequency Raman analysis of the bamboo-like and filled CNTs confirms the presence of radial breathing modes (RBM). The degree of graphitization of CNTs synthesized from Fe catalyst is higher than that from Ni catalyst as demonstrated by the high frequency Raman analysis. Simple models for the growth of bamboo-like and tubular catalyst filled nanotubes are proposed. △ Less

Submitted 3 July, 2019; originally announced August 2019.

Comments: Bamboo-like CNT ; Filled CNT; Catalyzed growth; APCVD; RBM. arXiv admin note: text overlap with arXiv:1906.00167

Journal ref: Journal of Nanoparticle Research, (2010), Vol. 12, pp. 457- 465

An atomic force microscopy and optical microscopy study of various shaped void formation and reduction in 3C-SiC films grown on Si using chemical vapor deposition

Authors: A. Gupta, J. Sengupta, C. Jacob

Abstract: The formation of various uncommon shaped voids along with regular triangular and square voids in the epitaxial 3C-SiC films on Si has been investigated by optical microscopy and atomic force microscopy. Heteroepitaxial growth of 3C-SiC films on Si (001) and (111) substrates has been performed using hexamethyldisilane in a resistance-heated chemical vapor deposition reactor. The influence of the or… ▽ More The formation of various uncommon shaped voids along with regular triangular and square voids in the epitaxial 3C-SiC films on Si has been investigated by optical microscopy and atomic force microscopy. Heteroepitaxial growth of 3C-SiC films on Si (001) and (111) substrates has been performed using hexamethyldisilane in a resistance-heated chemical vapor deposition reactor. The influence of the orientation of the Si substrate in determining the shape of the voids has clearly been observed. In addition, the growth period and the growth-temperature have been considered as the major parameters to control the size, density and shape of the voids. Generally, voids are faceted along {111} planes, but depending upon growth conditions, other facets with higher surface energy have also been observed. Finally the size and density of the voids are remarkably reduced, by suitable growth technique. △ Less

Submitted 4 June, 2019; originally announced June 2019.

Comments: 3C-SiC; CVD; HMDS; Void; AFM

Journal ref: Thin Solid Films, (2008), Vol. 516, pp. 1669_1676

Carbon nanotube synthesis from propane decomposition on a pre-treated Ni overlayer

Authors: J Sengupta, SK Panda, C Jacob

Abstract: Growth of carbon nanotubes (CNTs) was performed by atmospheric pressure chemical vapour deposition (APCVD) of propane on Si(111) with a pre-treated Ni overlayer acting as a catalyst. Prior to the growth of CNTs, a thin film of Ni was deposited on Si(111) substrate by evaporation and heat treated at 900°C. The growth of nanotubes was carried out at 850°C using propane as a source of carbon. Distrib… ▽ More Growth of carbon nanotubes (CNTs) was performed by atmospheric pressure chemical vapour deposition (APCVD) of propane on Si(111) with a pre-treated Ni overlayer acting as a catalyst. Prior to the growth of CNTs, a thin film of Ni was deposited on Si(111) substrate by evaporation and heat treated at 900°C. The growth of nanotubes was carried out at 850°C using propane as a source of carbon. Distribution of the catalyst particles over the Si substrate was analysed before and after heat treatment by atomic force microscopy (AFM). The X-ray diffraction (XRD) pattern of the grown material revealed that they are graphitic in nature. Field emission scanning electron microscopy (FESEM) was used to investigate the growth process and it was found that a catalytic particle was always situated at the tip of the tube thus implying a tip growth mechanism. Evidence for the presence of radial breathing mode from multi-wall nanotubes (MWNTs) in the grown sample was obtained from micro-Raman analysis. Finally, high-resolution transmission electron microscopic (HRTEM) analysis confirmed that the graphene layers of the CNTs are well ordered with typical 0.34 nm spacing. △ Less

Submitted 1 June, 2019; originally announced June 2019.

Comments: Carbon nanotube, Chemical Vapor Deposition, X Ray Diffraction, Atomic Force Microscopy, Raman Spectroscopy, Electron Microscopy

Journal ref: Bulletin of Materials Science,April 2009,Volume 32,Issue 2,pp 135_140

Growth and Characterization of Multi-Walled Carbon Nanotubes using Chemical Vapor Deposition

Authors: Joydip Sengupta

Abstract: In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts,… ▽ More In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts, Fe and Ni, were used in both elemental metal form and in a metal complex form. In the case of elemental metal catalysts, the respective metals were deposited over the Si substrate using thermal evaporation following which nanotubes were synthesized by means of CVD. Subsequent studies of the synthesized carbon nanostructures employing elemental metal catalysts revealed a significant influence of the temperature and the catalyst material on the structure of CNTs. The CNTs synthesized using Ni catalyst were bamboo-like whereas the CNTs developed employing Fe catalyst were straight tubes with partial metal filling. Consequently, growth models for the different growth mechanisms have been proposed. Certain limitations of the above process have been overcome by employing spin-coating of a metal complex catalyst material on the Si substrate. The CVD synthesis of nanotubes using metal complex catalysts always resulted in partially catalyst filled CNTs. More importantly, the metal complex catalyst could be easily patterned on the Si substrate using spin-coating and photolithography, which resulted in site selective growth of partially catalyst filled MWCNTs. Since the entire process of site selective growth is suitable for conventional device fabrication, this method is a promising and practical pathway for large-scale fabrication of several magnetic material filled CNT-based devices. △ Less

Submitted 8 June, 2018; originally announced August 2018.

Comments: Ph.D. Thesis (137 pages)

On Hecke eigenvalues of Siegel modular forms in the Maass space

Authors: Sanoli Gun, Biplab Paul, Jyoti Sengupta

Abstract: In this article, we prove an omega-result for the Hecke eigenvalues $λ_F(n)$ of Maass forms $F$ which are Hecke eigenforms in the space of Siegel modular forms of weight $k$, genus two for the Siegel modular group $Sp_2(\Z)$. In particular, we prove $$ λ_F(n)= Ω(n^{k-1}\text{exp} (c \frac{\sqrt{\log n}}{\log\log n})), $$ when $c>0$ is an absolute constant. This improves the earlier result… ▽ More In this article, we prove an omega-result for the Hecke eigenvalues $λ_F(n)$ of Maass forms $F$ which are Hecke eigenforms in the space of Siegel modular forms of weight $k$, genus two for the Siegel modular group $Sp_2(\Z)$. In particular, we prove $$ λ_F(n)= Ω(n^{k-1}\text{exp} (c \frac{\sqrt{\log n}}{\log\log n})), $$ when $c>0$ is an absolute constant. This improves the earlier result $$ λ_F(n)= Ω(n^{k-1} (\frac{\sqrt{\log n}}{\log\log n})) $$ of Das and the third author. We also show that for any $n \ge 3$, one has $$ λ_F(n) \leq n^{k-1}\text{exp} \left(c_1\sqrt{\frac{\log n}{\log\log n}}\right), $$ where $c_1>0$ is an absolute constant. This improves an earlier result of Pitale and Schmidt. Further, we investigate the limit points of the sequence $\{\frac{λ_F(n)}{n^{k-1}}\}_{n \in \N}$ and show that it has infinitely many limit points. Finally, we show that $λ_F(n) >0$ for all $n$, a result earlier proved by Breulmann by a different technique. △ Less

Submitted 16 January, 2018; originally announced January 2018.

Comments: 10 pages, To appear Forum Math

MSC Class: 11F46; 11F30

Prime Difference Champions

Authors: S. Funkhouser, D. A. Goldston, D. Sengupta, J. Sengupta

Abstract: A Prime Difference Champion (PDC) for primes up to $x$ is defined to be any element of the set of one or more differences that occur most frequently among all positive differences between primes $\le x$. Assuming an appropriate form of the Hardy-Littlewood Prime Pair Conjecture we can prove that for sufficiently large $x$ the PDCs run through the primorials. Numerical results also provide evidence… ▽ More A Prime Difference Champion (PDC) for primes up to $x$ is defined to be any element of the set of one or more differences that occur most frequently among all positive differences between primes $\le x$. Assuming an appropriate form of the Hardy-Littlewood Prime Pair Conjecture we can prove that for sufficiently large $x$ the PDCs run through the primorials. Numerical results also provide evidence for this conjecture as well as other interesting phenomena associated with prime differences. Unconditionally we prove that the PDCs go to infinity and further have asymptotically the same number of prime factors when counted logarithmically as the primorials. △ Less

Submitted 9 December, 2016; originally announced December 2016.

MSC Class: 11N05

Sign changes of Fourier coefficients of Siegel cusp forms of degree two on Hecke congruence subgroups

Authors: S. Gun, J. Sengupta

Abstract: In this article, the authors give a lower bound on the number of sign changes of Fourier coefficients of a non-zero degree two Siegel cusp form of even integral weight on a Hecke congruence subgroup. They also provide an explicit upper bound for the first sign change of Fourier coefficients of such Siegel cusp forms. Explicit upper bound on the first sign change of Fourier coefficients of a non-ze… ▽ More In this article, the authors give a lower bound on the number of sign changes of Fourier coefficients of a non-zero degree two Siegel cusp form of even integral weight on a Hecke congruence subgroup. They also provide an explicit upper bound for the first sign change of Fourier coefficients of such Siegel cusp forms. Explicit upper bound on the first sign change of Fourier coefficients of a non-zero Siegel cusp form of even integral weight on the Siegel modular group for arbitrary genus were dealt in an earlier work of Choie, the first author and Kohnen. △ Less

Submitted 27 January, 2017; v1 submitted 9 October, 2015; originally announced October 2015.

Comments: minor typos fixed

A case of simultaneous non-vanishing

Authors: Ritabrata Munshi, Jyoti Sengupta

Abstract: We show that for $k>1000$ an even number and a sufficiently large prime $q$, there exists a newform $f$ of weight $k$ and level $q$ such that $$ L(1/2,f)L(1/2,\text{Sym}^2 f)\neq 0. $$ We show that for $k>1000$ an even number and a sufficiently large prime $q$, there exists a newform $f$ of weight $k$ and level $q$ such that $$ L(1/2,f)L(1/2,\text{Sym}^2 f)\neq 0. $$ △ Less

Submitted 29 April, 2015; originally announced April 2015.

Comments: 8 pages

MSC Class: 11F67

Non-vanishing and sign changes of Hecke eigenvalues for Siegel cusp forms of genus two (with an Appendix by E. Kowalski and A. Saha)

Authors: Emmanuel Royer, Jyoti Sengupta, Jie Wu

Abstract: In this paper, we show that half of non-zero coefficients of the spinor zeta function of a Siegel cusp form of genus 2 are positive and half are negative. In this paper, we show that half of non-zero coefficients of the spinor zeta function of a Siegel cusp form of genus 2 are positive and half are negative. △ Less

Submitted 1 September, 2014; v1 submitted 6 June, 2014; originally announced June 2014.

Comments: 19 pages

Determination of $GL(3)$ Hecke-Maass forms from twisted central values

Authors: Ritabrata Munshi, Jyoti Sengupta

Abstract: Suppose $π_1$ and $π_2$ are two Hecke-Maass cusp forms for $SL(3,\mathbb{Z})$ such that for all primitive character $χ$ we have $$ L(\tfrac{1}{2},π_1\otimesχ)=L(\tfrac{1}{2},π_2\otimesχ). $$ Then we show that $π_1=π_2$. Suppose $π_1$ and $π_2$ are two Hecke-Maass cusp forms for $SL(3,\mathbb{Z})$ such that for all primitive character $χ$ we have $$ L(\tfrac{1}{2},π_1\otimesχ)=L(\tfrac{1}{2},π_2\otimesχ). $$ Then we show that $π_1=π_2$. △ Less

Submitted 30 January, 2014; originally announced January 2014.

Comments: First draft

MSC Class: 11F67

On a convolution series attached to a Siegel Hecke cusp form of degree 2

Authors: Soumya Das, Winfried Kohnen, Jyoti Sengupta

Abstract: We prove that the "naive" convolution Dirichlet series D_2(s) attached to a degree 2 Siegel Hecke cusp form F, has a pole at s=1. As an application, we write down the asymptotic formula for the partial sums of the squares of the eigenvalues of $F$ with an explicit error term. Further, as a corollary, we are able to show that the abscissa of absolute convergence of the (normalized) spinor zeta func… ▽ More We prove that the "naive" convolution Dirichlet series D_2(s) attached to a degree 2 Siegel Hecke cusp form F, has a pole at s=1. As an application, we write down the asymptotic formula for the partial sums of the squares of the eigenvalues of $F$ with an explicit error term. Further, as a corollary, we are able to show that the abscissa of absolute convergence of the (normalized) spinor zeta function attached to F is s = 1. △ Less

Submitted 18 June, 2013; originally announced June 2013.

Comments: 15 pages

MSC Class: 11F46

Software Process Models and Analysis on Failure of Software Development Projects

Authors: Rupinder Kaur, Jyotsna Sengupta

Abstract: The software process model consists of a set of activities undertaken to design, develop and maintain software systems. A variety of software process models have been designed to structure, describe and prescribe the software development process. The software process models play a very important role in software development, so it forms the core of the software product. Software project failure is… ▽ More The software process model consists of a set of activities undertaken to design, develop and maintain software systems. A variety of software process models have been designed to structure, describe and prescribe the software development process. The software process models play a very important role in software development, so it forms the core of the software product. Software project failure is often devastating to an organization. Schedule slips, buggy releases and missing features can mean the end of the project or even financial ruin for a company. Oddly, there is disagreement over what it means for a project to fail. In this paper, discussion is done on current process models and analysis on failure of software development, which shows the need of new research. △ Less

Submitted 5 June, 2013; originally announced June 2013.

Journal ref: IJSER, Volume 2, Issue 2, February 2012

Sign changes in short intervals of coefficients of spinor zeta function of a Siegel cusp form of genus 2

Authors: Emmanuel Royer, Jyoti Sengupta, Jie Wu

Abstract: In this paper, we establish a Voronoi formula for the spinor zeta function of a Siegel cusp form of genus 2. We deduce from this formula quantitative results on the number of its positive (resp. negative) coefficients in some short intervals. In this paper, we establish a Voronoi formula for the spinor zeta function of a Siegel cusp form of genus 2. We deduce from this formula quantitative results on the number of its positive (resp. negative) coefficients in some short intervals. △ Less

Submitted 10 July, 2013; v1 submitted 14 March, 2013; originally announced March 2013.

Comments: 12 pages

L^\infty norms of holomorphic modular forms in the case of compact quotient

Authors: Soumya Das, Jyoti Sengupta

Abstract: We prove a sub-convex estimate for the sup-norm of $L^2$-normalized holomorphic modular forms of weight $k$ on the upper half plane, with respect to the unit group of a quaternion division algebra over $\mf Q$. More precisely we show that when the $L^2$ norm of an eigenfunction $f$ is one, | f |_\infty \ll k^{1/2 - 12/131 + \varepsilon}, for any $\varepsilon>0$ and for all $k$ sufficiently large. We prove a sub-convex estimate for the sup-norm of $L^2$-normalized holomorphic modular forms of weight $k$ on the upper half plane, with respect to the unit group of a quaternion division algebra over $\mf Q$. More precisely we show that when the $L^2$ norm of an eigenfunction $f$ is one, | f |_\infty \ll k^{1/2 - 12/131 + \varepsilon}, for any $\varepsilon>0$ and for all $k$ sufficiently large. △ Less

Submitted 15 January, 2020; v1 submitted 16 January, 2013; originally announced January 2013.

Comments: 16 pages, typos corrected, saving exponent corrected

MSC Class: 11F11

On effective determination of Maass forms from central values of Rankin-Selberg $L$-function

Authors: Ritabrata Munshi, Jyoti Sengupta

Abstract: We address the problem of identifying a Hecke-Maass cusp form $f$ of full level from the central values of the Rankin-Selberg $L$-functions $L(1/2,f\otimes h)$ where $h$ runs through the set of Hecke-Maass eigenforms of full level. We prove a quantitative result in this direction. We address the problem of identifying a Hecke-Maass cusp form $f$ of full level from the central values of the Rankin-Selberg $L$-functions $L(1/2,f\otimes h)$ where $h$ runs through the set of Hecke-Maass eigenforms of full level. We prove a quantitative result in this direction. △ Less

Submitted 28 March, 2012; originally announced March 2012.

Comments: 12 pages

Customized way of Resource Discovery in a Campus Grid

Authors: Damandeep Kaur, Lokesh Shandi, Jyotsna Sengupta

Abstract: Campus Grid computing involves heterogeneous resources of an organization working in collaboration to sol e the problems that cannot be addressed by a single resource. However, basic problem for Campus Grid users is how to disco er the best resources required for the particular type of a job. There are various approaches using which Grid Discovery can be performed. This paper pro ides the grid res… ▽ More Campus Grid computing involves heterogeneous resources of an organization working in collaboration to sol e the problems that cannot be addressed by a single resource. However, basic problem for Campus Grid users is how to disco er the best resources required for the particular type of a job. There are various approaches using which Grid Discovery can be performed. This paper pro ides the grid resource discovery solutions for Campus Grid using Globus Toolkit which will enable us to customize the resource information according to the requirements based on the jobs to be run on the Campus Grid and present it in our own format. Here we propose building up our own service on top of globus MDS in order to process the information provided by MDS and use it in our Campus Grid Portal. △ Less

Submitted 14 June, 2010; originally announced June 2010.

Beurling's Theorem for $SL(2,\R)$

Authors: Rudra p Sarkar, Jyoti Sengupta

Abstract: We prove Beurling's theorem for the full group $SL(2,\R)$. This is the {\em master theorem} in the quantitative uncertainty principle as all the other theorems of this genre follow from it. We prove Beurling's theorem for the full group $SL(2,\R)$. This is the {\em master theorem} in the quantitative uncertainty principle as all the other theorems of this genre follow from it. △ Less

Submitted 27 December, 2006; originally announced December 2006.

Report number: R9/2005 MSC Class: 22E30; 43A85

Beurling's Theorem and characterization of heat kernel for Riemannian Symmetric spaces of noncompact type

Authors: Rudra P Sarkar, Jyoti Sengupta

Abstract: We prove Beurling's theorem for rank 1 Riemmanian symmetric spaces and relate it to the characterization of the heat kernel of the symmetric space. We prove Beurling's theorem for rank 1 Riemmanian symmetric spaces and relate it to the characterization of the heat kernel of the symmetric space. △ Less

Submitted 24 February, 2005; originally announced February 2005.

MSC Class: 22E30; 43A85