-
Temperature dependence of nonlinear elastic moduli of polystyrene
Authors:
Andrey V. Belashov,
Anna A. Zhikhoreva,
Yaroslav M. Beltukov,
Irina V. Semenova
Abstract:
Nonlinear elastic properties of polymers and polymeric composites are essential for accurate prediction of their response to dynamic loads, which is crucial in a wide range of applications. These properties can be affected by strain rate, temperature, and pressure. The temperature susceptibility of nonlinear elastic moduli of polymers remains poorly understood. We have recently observed a signific…
▽ More
Nonlinear elastic properties of polymers and polymeric composites are essential for accurate prediction of their response to dynamic loads, which is crucial in a wide range of applications. These properties can be affected by strain rate, temperature, and pressure. The temperature susceptibility of nonlinear elastic moduli of polymers remains poorly understood. We have recently observed a significant frequency dependence of the nonlinear elastic (Murnaghan) moduli of polystyrene. In this paper we expand this analysis by the temperature dependence. The measurement methodology was based on the acousto-elastic effect, and involved analysis of the dependencies of velocities of longitudinal and shear single-frequency ultrasonic waves in the sample on the applied static pressure. Measurements were performed at different temperatures in the range of 25-65 °C and at different frequencies in the range of 0.75-3 MHz. The temperature susceptibility of the nonlinear moduli $l$ and $m$ was found to be two orders of magnitude larger than that of linear moduli $λ$ and $μ$. At the same time, the observed variations of $n$ modulus with temperature were low and within the measurement tolerance. The observed tendencies can be explained by different influence of pressure on relaxation processes in the material at different temperatures.
△ Less
Submitted 3 February, 2025;
originally announced February 2025.
-
Shock Wave Evolution into Strain Solitary Wave in Nonlinearly Elastic Solid Bar
Authors:
F. E. Garbuzov,
A. V. Belashov,
A. A. Zhikhoreva,
Y. M. Beltukov,
I. V. Semenova
Abstract:
In this paper we present thorough experimental observation of the process of shock wave transformation into a bulk strain solitary wave in a nonlinearly elastic solid bar made of polystyrene. A theoretical model based on the describing propagation of a plane elastic wave in a bar is developed with account made for material nonlinearity and viscosity. Numerical modeling performed on the base of the…
▽ More
In this paper we present thorough experimental observation of the process of shock wave transformation into a bulk strain solitary wave in a nonlinearly elastic solid bar made of polystyrene. A theoretical model based on the describing propagation of a plane elastic wave in a bar is developed with account made for material nonlinearity and viscosity. Numerical modeling performed on the base of the developed model with and without regard to viscosity demonstrated formation of a long stable disturbance at proper account made for viscoelastic properties of the bar material.
△ Less
Submitted 5 May, 2022;
originally announced May 2022.
-
Status and initial physics performance studies of the MPD experiment at NICA
Authors:
MPD Collaboration,
V. Abgaryan,
R. Acevedo Kado,
S. V. Afanasyev,
G. N. Agakishiev,
E. Alpatov,
G. Altsybeev,
M. Alvarado Hernández,
S. V. Andreeva,
T. V. Andreeva,
E. V. Andronov,
N. V. Anfimov,
A. A. Aparin,
V. I. Astakhov,
E. Atkin,
T. Aushev,
G. S. Averichev,
A. V. Averyanov,
A. Ayala,
V. A. Babkin,
T. Babutsidze,
I. A. Balashov,
A. Bancer,
M. Yu. Barabanov,
D. A. Baranov
, et al. (454 additional authors not shown)
Abstract:
The Nuclotron-base Ion Collider fAcility (NICA) is under construction at the Joint Institute for Nuclear Research (JINR), with commissioning of the facility expected in late 2022. The Multi-Purpose Detector (MPD) has been designed to operate at NICA and its components are currently in production. The detector is expected to be ready for data taking with the first beams from NICA. This document pro…
▽ More
The Nuclotron-base Ion Collider fAcility (NICA) is under construction at the Joint Institute for Nuclear Research (JINR), with commissioning of the facility expected in late 2022. The Multi-Purpose Detector (MPD) has been designed to operate at NICA and its components are currently in production. The detector is expected to be ready for data taking with the first beams from NICA. This document provides an overview of the landscape of the investigation of the QCD phase diagram in the region of maximum baryonic density, where NICA and MPD will be able to provide significant and unique input. It also provides a detailed description of the MPD set-up, including its various subsystems as well as its support and computing infrastructures. Selected performance studies for particular physics measurements at MPD are presented and discussed in the context of existing data and theoretical expectations.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
Terahertz Kerr effect in a methylammonium lead bromide perovskite crystal
Authors:
A. A. Melnikov,
V. E. Anikeeva,
O. I. Semenova,
S. V. Chekalin
Abstract:
We have observed short-lived optical birefringence in a CH$_3$NH$_3$PbBr$_3$ single crystal induced by a powerful nearly single-cycle terahertz pulse. Apart from the instantaneous contribution that follows the profile of the squared pump electric field, the recorded anisotropy signal contains an exponential component decaying in $\sim$ 350 fs, underdamped oscillations at the frequency of $\sim$ 0.…
▽ More
We have observed short-lived optical birefringence in a CH$_3$NH$_3$PbBr$_3$ single crystal induced by a powerful nearly single-cycle terahertz pulse. Apart from the instantaneous contribution that follows the profile of the squared pump electric field, the recorded anisotropy signal contains an exponential component decaying in $\sim$ 350 fs, underdamped oscillations at the frequency of $\sim$ 0.16 THz and an intermediate picosecond relaxation process with a Gaussian tail. We associate these three non-trivial features with, respectively, Kerr effect in the inorganic lattice, terahertz-induced transient alignment of CH$_3$NH$_3^+$ cations, and their coherent rotation excited by the terahertz pulse in a Raman process.
△ Less
Submitted 8 May, 2022; v1 submitted 15 October, 2021;
originally announced October 2021.
-
The GlueX Beamline and Detector
Authors:
S. Adhikari,
C. S. Akondi,
H. Al Ghoul,
A. Ali,
M. Amaryan,
E. G. Anassontzis,
A. Austregesilo,
F. Barbosa,
J. Barlow,
A. Barnes,
E. Barriga,
R. Barsotti,
T. D. Beattie,
J. Benesch,
V. V. Berdnikov,
G. Biallas,
T. Black,
W. Boeglin,
P. Brindza,
W. J. Briscoe,
T. Britton,
J. Brock,
W. K. Brooks,
B. E. Cannon,
C. Carlin
, et al. (165 additional authors not shown)
Abstract:
The GlueX experiment at Jefferson Lab has been designed to study photoproduction reactions with a 9-GeV linearly polarized photon beam. The energy and arrival time of beam photons are tagged using a scintillator hodoscope and a scintillating fiber array. The photon flux is determined using a pair spectrometer, while the linear polarization of the photon beam is determined using a polarimeter based…
▽ More
The GlueX experiment at Jefferson Lab has been designed to study photoproduction reactions with a 9-GeV linearly polarized photon beam. The energy and arrival time of beam photons are tagged using a scintillator hodoscope and a scintillating fiber array. The photon flux is determined using a pair spectrometer, while the linear polarization of the photon beam is determined using a polarimeter based on triplet photoproduction. Charged-particle tracks from interactions in the central target are analyzed in a solenoidal field using a central straw-tube drift chamber and six packages of planar chambers with cathode strips and drift wires. Electromagnetic showers are reconstructed in a cylindrical scintillating fiber calorimeter inside the magnet and a lead-glass array downstream. Charged particle identification is achieved by measuring energy loss in the wire chambers and using the flight time of particles between the target and detectors outside the magnet. The signals from all detectors are recorded with flash ADCs and/or pipeline TDCs into memories allowing trigger decisions with a latency of 3.3 $μ$s. The detector operates routinely at trigger rates of 40 kHz and data rates of 600 megabytes per second. We describe the photon beam, the GlueX detector components, electronics, data-acquisition and monitoring systems, and the performance of the experiment during the first three years of operation.
△ Less
Submitted 26 October, 2020; v1 submitted 28 May, 2020;
originally announced May 2020.
-
Polystyrene-based nanocomposites with different fillers: fabrication and mechanical properties
Authors:
O. A. Moskalyuk,
A. V. Belashov,
Y. M. Beltukov,
E. M. Ivan'kova,
E. N. Popova,
I. V. Semenova,
V. Y. Yelokhovsky,
V. E. Yudin
Abstract:
The paper presents a comprehensive analysis of elastic properties of polystyrene-based nanocomposites filled with different types of inclusions: small spherical particles (SiO2 and Al2O3), alumosilicates (montmorillonite, halloysite natural tubules and Mica) and carbon nanofillers (carbon black and multi-walled carbon nanotubes). Composites were fabricated by melt technology. The analysis of compo…
▽ More
The paper presents a comprehensive analysis of elastic properties of polystyrene-based nanocomposites filled with different types of inclusions: small spherical particles (SiO2 and Al2O3), alumosilicates (montmorillonite, halloysite natural tubules and Mica) and carbon nanofillers (carbon black and multi-walled carbon nanotubes). Composites were fabricated by melt technology. The analysis of composite melts showed that the introduction of Montmorillonite, Multi-walled carbon nanotubes, and Al2O3 particles provided an increase in melt viscosity by an average of 2 to 5 orders of magnitude over the pure polystyrene. Block samples of composites with different filler concentrations were prepared, and their linear and nonlinear elastic properties were studied. The introduction of more rigid particles led to a more profound increase in the elastic modulus of the composite, with the highest rise of about 80% obtained with carbon fillers. Carbon black particles provided also an enhanced strength at break of about 20% higher than that of pure polystyrene.
The nonlinear elastic moduli of composites were shown to be more sensitive to addition of filler particles to the polymer matrix than the linear ones. The nonlinearity coefficient $β$ comprising the combination of linear and nonlinear elastic moduli of a material demonstrated considerable changes correlating with changes of the Young's modulus. The absolute value of $β$ showed rise in 1.5-1.6 times in the CB- and HNT-containing composites as compared to that of pure PS. The changes in nonlinear elasticity of fabricated composites were compared with measurements of the parameters of bulk nonlinear strain waves in them. Variations of wave velocity and decay decrement correlated with observed enhancement of materials nonlinearity.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
Relative variations of nonlinear elastic moduli in polystyrene-based nanocomposites
Authors:
A. V. Belashov,
Y. M. Beltukov,
O. A. Moskalyuk,
I. V. Semenova
Abstract:
In this paper we apply the methodology based on the analysis of changes in acoustic wave velocities under static stress for measurements of the third-order elastic moduli in three polystyrene-based nanocomposites with different fillers: SiO2 particles, halloysite natural tubules, and carbon black particles. The samples were fabricated by the same technology and our data provide information on rela…
▽ More
In this paper we apply the methodology based on the analysis of changes in acoustic wave velocities under static stress for measurements of the third-order elastic moduli in three polystyrene-based nanocomposites with different fillers: SiO2 particles, halloysite natural tubules, and carbon black particles. The samples were fabricated by the same technology and our data provide information on relative changes of nonlinear properties of the composites caused by addition of the fillers. The data obtained for composites are compared with that for commercial grade polystyrene. The substantial variations of the nonlinear elastic moduli for composites with different types of fillers are demonstrated and analyzed. The results are in a qualitative agreement with theoretical predictions.
△ Less
Submitted 3 May, 2020;
originally announced May 2020.
-
Calibration of MPD Electromagnetic Calorimeter with Muons
Authors:
A. Yu. Semenov,
I. A. Semenova,
M. Bhattacharjee,
A. Durum,
Yu. Krechetov,
V. Kulikov,
I. Mamonov,
M. Martemianov
Abstract:
Shashlyk-type electromagnetic calorimeter (ECal) of the Multi-Purpose Detector at heavy-ion NICA collider is optimized to provide precise spatial and energy measurements for photons and electrons in the energy range from about 40 MeV to 2-3 GeV. To deal with high multiplicity of secondary particles from Au-Au reactions, ECal has a fine segmentation and consists of 38,400 cells ("towers"). Given th…
▽ More
Shashlyk-type electromagnetic calorimeter (ECal) of the Multi-Purpose Detector at heavy-ion NICA collider is optimized to provide precise spatial and energy measurements for photons and electrons in the energy range from about 40 MeV to 2-3 GeV. To deal with high multiplicity of secondary particles from Au-Au reactions, ECal has a fine segmentation and consists of 38,400 cells ("towers"). Given the big number of "towers" and the time constraint, it is not possible to calibrate every ECal "tower" with beam. In this paper, we describe the strategy of the first-order calibration of ECal with cosmic muons.
△ Less
Submitted 17 February, 2020;
originally announced February 2020.
-
Beam Asymmetry $\mathbfΣ$ for the Photoproduction of $\mathbfη$ and $\mathbf{η^{\prime}}$ Mesons at $\mathbf{E_γ=8.8}$GeV
Authors:
The GlueX Collaboration,
S. Adhikari,
A. Ali,
M. Amaryan,
A. Austregesilo,
F. Barbosa,
J. Barlow,
A. Barnes,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
M. Boer,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
B. E. Cannon,
N. Cao,
E. Chudakov,
S. Cole,
O. Cortes,
V. Crede,
M. M. Dalton
, et al. (109 additional authors not shown)
Abstract:
We report on the measurement of the beam asymmetry $Σ$ for the reactions $\vecγp\rightarrow pη$ and $\vecγp \rightarrow pη^{\prime}$ from the GlueX experiment, using an 8.2--8.8 GeV linearly polarized tagged photon beam incident on a liquid hydrogen target in Hall D at Jefferson Lab. These measurements are made as a function of momentum transfer $-t$, with significantly higher statistical precisio…
▽ More
We report on the measurement of the beam asymmetry $Σ$ for the reactions $\vecγp\rightarrow pη$ and $\vecγp \rightarrow pη^{\prime}$ from the GlueX experiment, using an 8.2--8.8 GeV linearly polarized tagged photon beam incident on a liquid hydrogen target in Hall D at Jefferson Lab. These measurements are made as a function of momentum transfer $-t$, with significantly higher statistical precision than our earlier $η$ measurements, and are the first measurements of $η^{\prime}$ in this energy range. We compare the results to theoretical predictions based on $t$--channel quasi-particle exchange. We also compare the ratio of $Σ_η$ to $Σ_{η^{\prime}}$ to these models, as this ratio is predicted to be sensitive to the amount of $s\bar{s}$ exchange in the production. We find that photoproduction of both $η$ and $η^{\prime}$ is dominated by natural parity exchange with little dependence on $-t$.
△ Less
Submitted 24 November, 2019; v1 submitted 15 August, 2019;
originally announced August 2019.
-
Quantitative assessment of changes in cellular morphology at photodynamic treatment in vitro by means of digital holographic microscopy
Authors:
A. V. Belashov,
A. A. Zhikhoreva,
T. N. Belyaeva,
E. S. Kornilova,
A. V. Salova,
I. V. Semenova,
O. S. Vasyutinskii
Abstract:
Changes in morphological characteristics of cells from two cultured cancer cell lines, HeLa and A549, induced by photodynamic treatment with Radachlorin photosensitizer have been monitored using digital holographic microscopy. The observed dose-dependent post-treatment dynamics of phase shift variations demonstrated several scenarios of cell death. In particular the phase shift increase at low dos…
▽ More
Changes in morphological characteristics of cells from two cultured cancer cell lines, HeLa and A549, induced by photodynamic treatment with Radachlorin photosensitizer have been monitored using digital holographic microscopy. The observed dose-dependent post-treatment dynamics of phase shift variations demonstrated several scenarios of cell death. In particular the phase shift increase at low doses can be associated with apoptosis while its decrease at high doses can be associated with necrosis. Two cell types were shown to be differently responsive to treatment at the same doses. Although the sequence of death scenarios with increasing irradiation dose was demonstrated to be the same, each specific scenario was realized at substantially different doses. Results obtained by holographic microscopy were confirmed by confocal fluorescence microscopy with the commonly used test assay.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
On Boussinesq-type models for long longitudinal waves in elastic rods
Authors:
F. E. Garbuzov,
K. R. Khusnutdinova,
I. V. Semenova
Abstract:
In this paper we revisit the derivations of model equations describing long nonlinear longitudinal bulk strain waves in elastic rods within the scope of the Murnaghan model in order to derive a Boussinesq-type model, and extend these derivations to include axially symmetric loading on the lateral boundary surface, and longitudinal pre-stretch. We systematically derive two forced Boussinesq-type mo…
▽ More
In this paper we revisit the derivations of model equations describing long nonlinear longitudinal bulk strain waves in elastic rods within the scope of the Murnaghan model in order to derive a Boussinesq-type model, and extend these derivations to include axially symmetric loading on the lateral boundary surface, and longitudinal pre-stretch. We systematically derive two forced Boussinesq-type models from the full equations of motion and non-zero surface boundary conditions, utilising the presence of two small parameters characterising the smallness of the wave amplitude and the long wavelength compared to the radius of the waveguide. We compare the basic dynamical properties of both models (linear dispersion curves and solitary wave solutions). We also briefly describe the laboratory experiments on generation of bulk strain solitary waves in the Ioffe Institute, and suggest that this generation process can be modelled using the derived equations.
△ Less
Submitted 22 January, 2019; v1 submitted 17 October, 2018;
originally announced October 2018.
-
Construction and Performance of the Barrel Electromagnetic Calorimeter for the GlueX Experiment
Authors:
Tegan Beattie,
Ahmed Foda,
Colleen Henschel,
S Katsaganis,
Shaun Krueger,
George Lolos,
Zisis Papandreou,
E. L. Plummer,
Irina Semenova,
Andrei Semenov,
Fernando Barbosa,
Eugene Chudakov,
Mark Dalton,
David Lawrence,
Yi Qiang,
Nicholas Sandoval,
Elton Smith,
Christopher Stanislav,
Justin Stevens,
Simon Taylor,
Timothy Whitlatch,
Benedikt Zihlmann,
William Levine,
William McGinley,
Curtis Meyer
, et al. (14 additional authors not shown)
Abstract:
The barrel calorimeter is part of the new spectrometer installed in Hall D at Jefferson Lab for the GlueX experiment. The calorimeter was installed in 2013, commissioned in 2014 and has been operating routinely since early 2015. The detector configuration, associated Monte Carlo simulations, calibration and operational performance are described herein. The calorimeter records the time and energy d…
▽ More
The barrel calorimeter is part of the new spectrometer installed in Hall D at Jefferson Lab for the GlueX experiment. The calorimeter was installed in 2013, commissioned in 2014 and has been operating routinely since early 2015. The detector configuration, associated Monte Carlo simulations, calibration and operational performance are described herein. The calorimeter records the time and energy deposited by charged and neutral particles created by a multi-GeV photon beam. It is constructed as a lead and scintillating-fiber calorimeter and read out with 3840 large-area silicon photomultiplier arrays. Particles impinge on the detector over a wide range of angles, from normal incidence at 90 degrees down to 11.5 degrees, which defines a geometry that is fairly unique among calorimeters. The response of the calorimeter has been measured during a running experiment and performs as expected for electromagnetic showers below 2.5 GeV. We characterize the performance of the BCAL using the energy resolution integrated over typical angular distributions for $π^0$ and $η$ production of $σ_E/E$=5.2\%/$\sqrt{E(\rm{GeV})} \oplus$ 3.6\% and a timing resolution of $σ$\,=\,150\,ps at 1\,GeV.
△ Less
Submitted 20 April, 2018; v1 submitted 9 January, 2018;
originally announced January 2018.
-
Measurement of the beam asymmetry $Σ$ for $π^0$ and $η$ photoproduction on the proton at $E_γ= 9$ GeV
Authors:
GlueX Collaboration,
H. Al Ghoul,
E. G. Anassontzis,
A. Austregesilo,
F. Barbosa,
A. Barnes,
T. D. Beattie,
D. W. Bennett,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
W. K. Brooks,
B. E. Cannon,
O. Chernyshov,
E. Chudakov,
V. Crede,
M. M. Dalton,
A. Deur,
S. Dobbs,
A. Dolgolenko,
M. Dugger,
R. Dzhygadlo,
H. Egiyan,
P. Eugenio
, et al. (101 additional authors not shown)
Abstract:
We report measurements of the photon beam asymmetry $Σ$ for the reactions $\vecγp\to pπ^0$ and $\vecγp\to pη$ from the GlueX experiment using a 9 GeV linearly-polarized, tagged photon beam incident on a liquid hydrogen target in Jefferson Lab's Hall D. The asymmetries, measured as a function of the proton momentum transfer, possess greater precision than previous $π^0$ measurements and are the fir…
▽ More
We report measurements of the photon beam asymmetry $Σ$ for the reactions $\vecγp\to pπ^0$ and $\vecγp\to pη$ from the GlueX experiment using a 9 GeV linearly-polarized, tagged photon beam incident on a liquid hydrogen target in Jefferson Lab's Hall D. The asymmetries, measured as a function of the proton momentum transfer, possess greater precision than previous $π^0$ measurements and are the first $η$ measurements in this energy regime. The results are compared with theoretical predictions based on $t$-channel, quasi-particle exchange and constrain the axial-vector component of the neutral meson production mechanism in these models.
△ Less
Submitted 15 May, 2017; v1 submitted 27 January, 2017;
originally announced January 2017.
-
First Results from The GlueX Experiment
Authors:
The GlueX Collaboration,
H. Al Ghoul,
E. G. Anassontzis,
F. Barbosa,
A. Barnes,
T. D. Beattie,
D. W. Bennett,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. K. Brooks,
B. Cannon,
O. Chernyshov,
E. Chudakov,
V. Crede,
M. M. Dalton,
A. Deur,
S. Dobbs,
A. Dolgolenko,
M. Dugger,
H. Egiyan,
P. Eugenio,
A. M. Foda,
J. Frye,
S. Furletov
, et al. (86 additional authors not shown)
Abstract:
The GlueX experiment at Jefferson Lab ran with its first commissioning beam in late 2014 and the spring of 2015. Data were collected on both plastic and liquid hydrogen targets, and much of the detector has been commissioned. All of the detector systems are now performing at or near design specifications and events are being fully reconstructed, including exclusive production of $π^{0}$, $η$ and…
▽ More
The GlueX experiment at Jefferson Lab ran with its first commissioning beam in late 2014 and the spring of 2015. Data were collected on both plastic and liquid hydrogen targets, and much of the detector has been commissioned. All of the detector systems are now performing at or near design specifications and events are being fully reconstructed, including exclusive production of $π^{0}$, $η$ and $ω$ mesons. Linearly-polarized photons were successfully produced through coherent bremsstrahlung and polarization transfer to the $ρ$ has been observed.
△ Less
Submitted 14 January, 2016; v1 submitted 11 December, 2015;
originally announced December 2015.
-
A study of decays to strange final states with GlueX in Hall D using components of the BaBar DIRC
Authors:
The GlueX Collaboration,
M. Dugger,
B. Ritchie,
I. Senderovich,
E. Anassontzis,
P. Ioannou,
C. Kourkoumeli,
G. Vasileiadis,
G. Voulgaris,
N. Jarvis,
W. Levine,
P. Mattione,
W. McGinley,
C. A. Meyer,
R. Schumacher,
M. Staib,
F. Klein,
D. Sober,
N. Sparks,
N. Walford,
D. Doughty,
A. Barnes,
R. Jones,
J. McIntyre,
F. Mokaya
, et al. (82 additional authors not shown)
Abstract:
We propose to enhance the kaon identification capabilities of the GlueX detector by constructing an FDIRC (Focusing Detection of Internally Reflected Cherenkov) detector utilizing the decommissioned BaBar DIRC components. The GlueX FDIRC would significantly enhance the GlueX physics program by allowing one to search for and study hybrid mesons decaying into kaon final states. Such systematic studi…
▽ More
We propose to enhance the kaon identification capabilities of the GlueX detector by constructing an FDIRC (Focusing Detection of Internally Reflected Cherenkov) detector utilizing the decommissioned BaBar DIRC components. The GlueX FDIRC would significantly enhance the GlueX physics program by allowing one to search for and study hybrid mesons decaying into kaon final states. Such systematic studies of kaon final states are essential for inferring the quark flavor content of hybrid and conventional mesons. The GlueX FDIRC would reuse one-third of the synthetic fused silica bars that were utilized in the BaBar DIRC. A new focussing photon camera, read out with large area photodetectors, would be developed. We propose operating the enhanced GlueX detector in Hall D for a total of 220 days at an average intensity of 5x10^7 γ/s, a program that was conditionally approved by PAC39
△ Less
Submitted 1 August, 2014;
originally announced August 2014.
-
An initial study of mesons and baryons containing strange quarks with GlueX
Authors:
The GlueX Collaboration,
A. AlekSejevs,
S. Barkanova,
M. Dugger,
B. Ritchie,
I. Senderovich,
E. Anassontzis,
P. Ioannou,
C. Kourkoumeli,
G. Voulgaris,
N. Jarvis,
W. Levine,
P. Mattione,
W. McGinley,
C. A. Meyer,
R. Schumacher,
M. Staib,
P. Collins,
F. Klein,
D. Sober,
D. Doughty,
A. Barnes,
R. Jones,
J. McIntyre,
F. Mokaya
, et al. (75 additional authors not shown)
Abstract:
The primary motivation of the GlueX experiment is to search for and ultimately study the pattern of gluonic excitations in the meson spectrum produced in $γp$ collisions. Recent lattice QCD calculations predict a rich spectrum of hybrid mesons that have both exotic and non-exotic $J^{PC}$, corresponding to $q\bar{q}$ states ($q=u,$ $d,$ or $s$) coupled with a gluonic field. A thorough study of the…
▽ More
The primary motivation of the GlueX experiment is to search for and ultimately study the pattern of gluonic excitations in the meson spectrum produced in $γp$ collisions. Recent lattice QCD calculations predict a rich spectrum of hybrid mesons that have both exotic and non-exotic $J^{PC}$, corresponding to $q\bar{q}$ states ($q=u,$ $d,$ or $s$) coupled with a gluonic field. A thorough study of the hybrid spectrum, including the identification of the isovector triplet, with charges 0 and $\pm1$, and both isoscalar members, $|s\bar{s}\ >$ and $|u\bar{u}\ > + |d\bar{d}\ >$, for each predicted hybrid combination of $J^{PC}$, may only be achieved by conducting a systematic amplitude analysis of many different hadronic final states. Detailed studies of the performance of the \gx detector have indicated that identification of particular final states with kaons is possible using the baseline detector configuration. The efficiency of kaon detection coupled with the relatively lower production cross section for particles containing hidden strangeness will require a high intensity run in order for analyses of such states to be feasible. We propose to collect a total of 200 days of physics analysis data at an average intensity of $5\times 10^7$ tagged photons on target per second. This data sample will provide an order of magnitude statistical improvement over the initial GlueX running, which will allow us to begin a program of studying mesons and baryons containing strange quarks. In addition, the increased intensity will permit us to study reactions that may have been statistically limited in the initial phases of GlueX. Overall, this will lead to a significant increase in the potential for \gx to make key experimental advances in our knowledge of hybrid mesons and excited $Ξ$ baryons.
△ Less
Submitted 7 May, 2013;
originally announced May 2013.
-
About the survey of propagandistic messages in contemporary social media
Authors:
Yuri Monakhov,
Natalia Kostina,
Maria Medvednikova,
Oleg Makarov,
Irina Semenova
Abstract:
This paper presents the research results that have identified a set of characteristic parameters of propagandistic messages. Later these parameters can be used in the algorithm creating special user-oriented propagandistic messages to improve distribution and assimilation of information by users.
This paper presents the research results that have identified a set of characteristic parameters of propagandistic messages. Later these parameters can be used in the algorithm creating special user-oriented propagandistic messages to improve distribution and assimilation of information by users.
△ Less
Submitted 25 March, 2013;
originally announced March 2013.
-
Analytical model of misinformation of a social network node
Authors:
Yuri Monakhov,
Maria Medvednikova,
Konstantin Abramov,
Natalia Kostina,
Roman Malyshev,
Makarov Oleg,
Irina Semenova
Abstract:
This paper presents the research of the influence of cognitive, behavioral, representational factors on the susceptibility of the participants in social networks to misinformation, as well as on the activity of the nodes in this regard. The importance of this research consists of method of blocking the propaganda. This is very important because when people involuntarily acquire information some of…
▽ More
This paper presents the research of the influence of cognitive, behavioral, representational factors on the susceptibility of the participants in social networks to misinformation, as well as on the activity of the nodes in this regard. The importance of this research consists of method of blocking the propaganda. This is very important because when people involuntarily acquire information some of them experience an undesired change in their social attitude. Such phenomena typically lead towards the information warfare. A model was developed during this research for calculating the level of misinformation of the social network participant (network node) based on the model of iterative learning process.
△ Less
Submitted 3 December, 2012;
originally announced December 2012.
-
A study of meson and baryon decays to strange final states with GlueX in Hall D (A proposal to the 39th Jefferson Lab Program Advisory Committee)
Authors:
The GlueX Collaboration,
M. Dugger,
B. Ritchie,
E. Anassontzis,
P. Ioannou,
C. Kourkoumeli,
G. Voulgaris,
N. Jarvis,
W. Levine,
P. Mattione,
C. A. Meyer,
R. Schumacher,
P. Collins,
F. Klein,
D. Sober,
D. Doughty,
A. Barnes,
R. Jones,
J. McIntyre,
F. Mokaya,
B. Pratt,
I. Senderovich,
W. Boeglin,
L. Guo,
P. Khetarpal
, et al. (54 additional authors not shown)
Abstract:
The primary motivation of the GlueX experiment is to search for and ultimately study the pattern of gluonic excitations in the meson spectrum produced in gamma p collisions. Recent lattice QCD calculations predict a rich spectrum of hybrid mesons that have both exotic and non-exotic JPC, corresponding to q q-bar (q=u, d, or s) states coupled with a gluonic field. A thorough study of the hybrid spe…
▽ More
The primary motivation of the GlueX experiment is to search for and ultimately study the pattern of gluonic excitations in the meson spectrum produced in gamma p collisions. Recent lattice QCD calculations predict a rich spectrum of hybrid mesons that have both exotic and non-exotic JPC, corresponding to q q-bar (q=u, d, or s) states coupled with a gluonic field. A thorough study of the hybrid spectrum, including the identification of the isovector triplet, with charges 0 and +-1, and both isoscalar members, |s s-bar> and |u u-bar> + |d d-bar>, for each predicted hybrid combination of JPC, may only be achieved by conducting a systematic amplitude analysis of many different hadronic final states. We propose the development of a kaon identification system, supplementing the existing GlueX forward time-of-flight detector, in order to cleanly select meson and baryon decay channels that include kaons. Once this detector has been installed and commissioned, we plan to collect a total of 200 days of physics analysis data at an average intensity of 5 x 10^7 tagged photons on target per second. This data sample will provide an order of magnitude statistical improvement over the initial GlueX data set and, with the developed kaon identification system, a significant increase in the potential for GlueX to make key experimental advances in our knowledge of hybrid mesons and Cascade baryons.
△ Less
Submitted 16 October, 2012;
originally announced October 2012.
-
Intelligent Technologies in Model Base Management System Design Automation
Authors:
Irina Semenova
Abstract:
The article describes the prospects of model base management system design automation for decision support systems and suggests the toolbox scheme for design automation based on intelligent technologies.
The article describes the prospects of model base management system design automation for decision support systems and suggests the toolbox scheme for design automation based on intelligent technologies.
△ Less
Submitted 24 April, 2010;
originally announced April 2010.
-
Tensor Ayy and vector Ay analyzing powers in the H(d,d')X and ^{12}C(d,d')X reactons at initial deuteron momenta of 9 GeV/c in the region of baryonic resonances excitation
Authors:
V. P. Ladygin,
L. S. Azhgirey,
S. V. Afanasiev,
V. V. Arkhipov,
V. K. Bondarev,
Yu. T. Borzounov,
L. B. Golovanov,
A. Yu. Isupov,
V. I. Ivanov,
A. A. Kartamyshev,
V. A. Kashirin,
A. N. Khrenov,
V. I. Kolesnikov,
V. A. Kuznetsov,
N. B. Ladygina,
A. G. Litvinenko,
S. G. Reznikov,
P. A. Rukoyatkin,
A. Yu. Semenov,
I. A. Semenova,
G. D. Stoletov,
A. P. Tzvinev,
V. N. Zhmyrov,
L. S. Zolin,
G. Filipov
Abstract:
The angular dependence of the tensor Ayy and vector Ay analyzing powers in the inelastic scattering of deuterons with a momentum of 9.0 GeV/c on hydrogen and carbon have been measured. The range of measurements corresponds to the baryonic resonance excitation with masses 2.2--2.6 GeV/c^2. The Ayy data being in good agreement with the previous results demonstrate an approximate $t$ scaling up to…
▽ More
The angular dependence of the tensor Ayy and vector Ay analyzing powers in the inelastic scattering of deuterons with a momentum of 9.0 GeV/c on hydrogen and carbon have been measured. The range of measurements corresponds to the baryonic resonance excitation with masses 2.2--2.6 GeV/c^2. The Ayy data being in good agreement with the previous results demonstrate an approximate $t$ scaling up to -1.5 (GeV/c)^2. The large values of A_y show a significant role of the spin-dependent part of the elementary amplitude of the NN->NN* reaction. The results of the experiment are compared with model predictions of the plane-wave impulse approximation.
△ Less
Submitted 17 October, 2005;
originally announced October 2005.
-
Investigation of the Angular Dependence of the Tensor Analyzing Power of 9 Gev/C Deuteron Breakup
Authors:
L. S. Azhgirey,
S. V. Afanasiev,
V. V. Arkhipov,
V. K. Bondarev,
Yu. T. Borzounov,
G. Filipov,
L. B. Golovanov,
A. Yu. Isupov,
A. A. Kartamyshev,
V. A. Kashirin,
A. N. Khrenov,
V. I. Kolesnikov,
V. A. Kuznezov,
V. P. Ladygin,
A. G. Litvinenko,
S. G. Reznikov,
P. A. Rukoyatkin,
A. Yu. Semenov,
I. A. Semenova,
G. D. Stoletov,
A. P. Tzvinev,
N. P. Yudin,
V. N. Zhmyrov,
L. S. Zolin
Abstract:
An angular dependence of the tensor analyzing power of the breakup of polarized deuterons at 9 GeV/$c$ has been investigated. The measurements have been made on hydrogen and carbon targets at angles in the range from 85 to 160 mr. The data obtained are analyzed within the framework of the light-front dynamics using the deuteron wave functions for Paris and Bonn CD potentials, and the relativisti…
▽ More
An angular dependence of the tensor analyzing power of the breakup of polarized deuterons at 9 GeV/$c$ has been investigated. The measurements have been made on hydrogen and carbon targets at angles in the range from 85 to 160 mr. The data obtained are analyzed within the framework of the light-front dynamics using the deuteron wave functions for Paris and Bonn CD potentials, and the relativistic deuteron wave function by Karmanov et al. The experimental data are in rough agreement with calculations with the use of Karmanov's deuteron wave function.
△ Less
Submitted 10 November, 2004;
originally announced November 2004.
-
Tensor analyzing power Ayy in deuteron inclusive breakup at large Pt and spin structure of deuteron at short internucleonic distances
Authors:
V. P. Ladygin,
L. S. Azhgirey,
S. V. Afanasiev,
V. V. Arkhipov,
V. K. Bondarev,
Yu. T. Borzounov,
L. B. Golovanov,
A. Yu. Isupov,
A. A. Kartamyshev,
V. A. Kashirin,
A. N. Khrenov,
V. I. Kolesnikov,
V. A. Kuznezov,
A. G. Litvinenko,
S. G. Reznikov,
P. A. Rukoyatkin,
A. Yu. Semenov,
I. A. Semenova,
G. D. Stoletov,
A. P. Tzvinev,
V. N. Zhmyrov,
L. S. Zolin,
G. Filipov,
N. P. Yudin
Abstract:
The Ayy data for deuteron inclusive breakup off hydrogen and carbon at a deuteron momentum of 9.0 GeV/c and large Pt of emitted protons are presented. The large values of Ayy independent of the target mass reflect the sensitivity of the data to the deuteron spin structure. The data obtained at fixed $x$ and plotted versus Pt clearly demonstrate the dependence of the deuteron spin structure at sh…
▽ More
The Ayy data for deuteron inclusive breakup off hydrogen and carbon at a deuteron momentum of 9.0 GeV/c and large Pt of emitted protons are presented. The large values of Ayy independent of the target mass reflect the sensitivity of the data to the deuteron spin structure. The data obtained at fixed $x$ and plotted versus Pt clearly demonstrate the dependence of the deuteron spin structure at short internucleonic distances on two variables. The data are compared with the calculations using Paris, CD-Bonn and Karmanov's deuteron wave functions.
△ Less
Submitted 29 October, 2004;
originally announced October 2004.
