-
The fate of icy pebbles undergoing sublimation in protoplanetary discs
Authors:
Stefano Spadaccia,
Holly L. Capelo,
Antoine Pommerol,
Philipp Schuetz,
Yann Alibert,
Katrin Ros,
Nicolas Thomas
Abstract:
Icy pebbles may play an important role in planet formation close to the water ice line of protoplanetary discs. There, dust coagulation is more efficient and re-condensation of vapor on pebbles may enhance their growth outside the ice line. Previous theoretical studies showed that disruption of icy pebbles due to sublimation increases the growth rate of pebbles inside and outside the ice line, by…
▽ More
Icy pebbles may play an important role in planet formation close to the water ice line of protoplanetary discs. There, dust coagulation is more efficient and re-condensation of vapor on pebbles may enhance their growth outside the ice line. Previous theoretical studies showed that disruption of icy pebbles due to sublimation increases the growth rate of pebbles inside and outside the ice line, by freeing small silicate particles back in the dust reservoir of the disc. However, since planet accretion is dependent on the Stokes number of the accreting pebbles, the growth of planetesimals could be enhanced downstream of the ice line if pebbles are not disrupting upon sublimation. We developed two experimental models of icy pebbles using different silicate dusts, and we exposed them to low-temperature and low-pressure conditions in a vacuum chamber. Increasing the temperature inside the chamber, we studied the conditions for which pebbles are preserved through sublimation without disrupting. We find that small silicate particles ($<50$um) and a small quantity of ice (around $15$% pebble mass) are optimal conditions for preserving pebbles through sublimation. Furthermore, pebbles with coarse dust distribution ($100-300$um) do not disrupt if a small percentage ($10-20$% mass) of dust grains are smaller than $50$um. Our findings highlight how sublimation is not necessarily causing disruption, and that pebbles seem to survive fast sublimation processes effectively.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Hard X-ray photoemission spectroscopy of LaVO$_3$/SrTiO$_3$: Band alignment and electronic reconstruction
Authors:
M. Stübinger,
J. Gabel,
P. Scheiderer,
M. Zapf,
M. Schmitt,
P. Schütz,
B. Leikert,
J. Küspert,
M. Kamp,
P. K. Thakur,
T. -L. Lee,
P. Potapov,
A. Lubk,
B. Büchner,
M. Sing,
R. Claessen
Abstract:
The heterostructure consisting of the Mott insulator LaVO$_3$ and the band insulator SrTiO$_3$ is considered a promising candidate for future photovoltaic applications. Not only does the (direct) excitation gap of LaVO$_3$ match well the solar spectrum, but its correlated nature and predicted built-in potential, owing to the non-polar/polar interface when integrated with SrTiO$_3$, also offer rema…
▽ More
The heterostructure consisting of the Mott insulator LaVO$_3$ and the band insulator SrTiO$_3$ is considered a promising candidate for future photovoltaic applications. Not only does the (direct) excitation gap of LaVO$_3$ match well the solar spectrum, but its correlated nature and predicted built-in potential, owing to the non-polar/polar interface when integrated with SrTiO$_3$, also offer remarkable advantages over conventional solar cells. However, experimental data beyond the observation of a thickness-dependent metal-insulator transition is scarce and a profound, microscopic understanding of the electronic properties is still lacking. By means of soft and hard X-ray photoemission spectroscopy as well as resistivity and Hall effect measurements we study the electrical properties, band bending, and band alignment of LaVO$_3$/SrTiO$_3$ heterostructures. We find a critical LaVO$_3$ thickness of five unit cells, confinement of the conducting electrons to exclusively Ti 3$d$ states at the interface, and a potential gradient in the film. From these findings we conclude on electronic reconstruction as the driving mechanism for the formation of the metallic interface in LaVO$_3$/SrTiO$_3$.
△ Less
Submitted 26 May, 2021;
originally announced May 2021.
-
Multi-task deep learning for image segmentation using recursive approximation tasks
Authors:
Rihuan Ke,
Aurélie Bugeau,
Nicolas Papadakis,
Mark Kirkland,
Peter Schuetz,
Carola-Bibiane Schönlieb
Abstract:
Fully supervised deep neural networks for segmentation usually require a massive amount of pixel-level labels which are manually expensive to create. In this work, we develop a multi-task learning method to relax this constraint. We regard the segmentation problem as a sequence of approximation subproblems that are recursively defined and in increasing levels of approximation accuracy. The subprob…
▽ More
Fully supervised deep neural networks for segmentation usually require a massive amount of pixel-level labels which are manually expensive to create. In this work, we develop a multi-task learning method to relax this constraint. We regard the segmentation problem as a sequence of approximation subproblems that are recursively defined and in increasing levels of approximation accuracy. The subproblems are handled by a framework that consists of 1) a segmentation task that learns from pixel-level ground truth segmentation masks of a small fraction of the images, 2) a recursive approximation task that conducts partial object regions learning and data-driven mask evolution starting from partial masks of each object instance, and 3) other problem oriented auxiliary tasks that are trained with sparse annotations and promote the learning of dedicated features. Most training images are only labeled by (rough) partial masks, which do not contain exact object boundaries, rather than by their full segmentation masks. During the training phase, the approximation task learns the statistics of these partial masks, and the partial regions are recursively increased towards object boundaries aided by the learned information from the segmentation task in a fully data-driven fashion. The network is trained on an extremely small amount of precisely segmented images and a large set of coarse labels. Annotations can thus be obtained in a cheap way. We demonstrate the efficiency of our approach in three applications with microscopy images and ultrasound images.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
-
Learning to segment microscopy images with lazy labels
Authors:
Rihuan Ke,
Aurélie Bugeau,
Nicolas Papadakis,
Peter Schuetz,
Carola-Bibiane Schönlieb
Abstract:
The need for labour intensive pixel-wise annotation is a major limitation of many fully supervised learning methods for segmenting bioimages that can contain numerous object instances with thin separations. In this paper, we introduce a deep convolutional neural network for microscopy image segmentation. Annotation issues are circumvented by letting the network being trainable on coarse labels com…
▽ More
The need for labour intensive pixel-wise annotation is a major limitation of many fully supervised learning methods for segmenting bioimages that can contain numerous object instances with thin separations. In this paper, we introduce a deep convolutional neural network for microscopy image segmentation. Annotation issues are circumvented by letting the network being trainable on coarse labels combined with only a very small number of images with pixel-wise annotations. We call this new labelling strategy `lazy' labels. Image segmentation is stratified into three connected tasks: rough inner region detection, object separation and pixel-wise segmentation. These tasks are learned in an end-to-end multi-task learning framework. The method is demonstrated on two microscopy datasets, where we show that the model gives accurate segmentation results even if exact boundary labels are missing for a majority of annotated data. It brings more flexibility and efficiency for training deep neural networks that are data hungry and is applicable to biomedical images with poor contrast at the object boundaries or with diverse textures and repeated patterns.
△ Less
Submitted 10 September, 2020; v1 submitted 20 June, 2019;
originally announced June 2019.
-
Tailoring Materials for Mottronics: Excess Oxygen Doping of a Prototypical Mott Insulator
Authors:
Philipp Scheiderer,
Matthias Schmitt,
Judith Gabel,
Martin Stübinger,
Philipp Schütz,
Lenart Dudy,
Christoph Schlueter,
Tien-Lin Lee,
Michael Sing,
Ralph Claessen
Abstract:
The Mott transistor is a paradigm for a new class of electronic devices---often referred to by the term Mottronics---, which are based on charge correlations between the electrons. Since correlation-induced insulating phases of most oxide compounds are usually very robust, new methods have to be developed to push such materials right to the boundary to the metallic phase in order to enable the met…
▽ More
The Mott transistor is a paradigm for a new class of electronic devices---often referred to by the term Mottronics---, which are based on charge correlations between the electrons. Since correlation-induced insulating phases of most oxide compounds are usually very robust, new methods have to be developed to push such materials right to the boundary to the metallic phase in order to enable the metal-insulator transition to be switched by electric gating.
Here we demonstrate that thin films of the prototypical Mott insulator LaTiO$_3$ grown by pulsed laser deposition under oxygen atmosphere are readily tuned by excess oxygen doping across the line of the band-filling controlled Mott transition in the electronic phase diagram. The detected insulator to metal transition is characterized by a strong change in resistivity of several orders of magnitude. The use of suitable substrates and capping layers to inhibit oxygen diffusion facilitates full control of the oxygen content and renders the films stable against exposure to ambient conditions, making LaTiO$_{3+x}$ a promising functional material for Mottronics devices.
△ Less
Submitted 16 July, 2018;
originally announced July 2018.
-
Microscopic origin of the mobility enhancement at a spinel/perovskite oxide heterointerface revealed by photoemission spectroscopy
Authors:
P. Schütz,
D. V. Christensen,
V. Borisov,
F. Pfaff,
P. Scheiderer,
L. Dudy,
M. Zapf,
J. Gabel,
Y. Z. Chen,
N. Pryds,
V. A. Rogalev,
V. N. Strocov,
C. Schlueter,
T. -L. Lee,
H. O. Jeschke,
R. Valentí,
M. Sing,
R. Claessen
Abstract:
The spinel/perovskite heterointerface $γ$-Al$_2$O$_3$/SrTiO$_3$ hosts a two-dimensional electron system (2DES) with electron mobilities exceeding those in its all-perovskite counterpart LaAlO$_3$/SrTiO$_3$ by more than an order of magnitude despite the abundance of oxygen vacancies which act as electron donors as well as scattering sites. By means of resonant soft x-ray photoemission spectroscopy…
▽ More
The spinel/perovskite heterointerface $γ$-Al$_2$O$_3$/SrTiO$_3$ hosts a two-dimensional electron system (2DES) with electron mobilities exceeding those in its all-perovskite counterpart LaAlO$_3$/SrTiO$_3$ by more than an order of magnitude despite the abundance of oxygen vacancies which act as electron donors as well as scattering sites. By means of resonant soft x-ray photoemission spectroscopy and \textit{ab initio} calculations we reveal the presence of a sharply localized type of oxygen vacancies at the very interface due to the local breaking of the perovskite symmetry. We explain the extraordinarily high mobilities by reduced scattering resulting from the preferential formation of interfacial oxygen vacancies and spatial separation of the resulting 2DES in deeper SrTiO$_3$ layers. Our findings comply with transport studies and pave the way towards defect engineering at interfaces of oxides with different crystal structures.
△ Less
Submitted 16 October, 2017;
originally announced October 2017.
-
Dimensionality-driven metal-insulator-transition in spin-orbit coupled SrIrO$_3$
Authors:
P. Schütz,
D. Di Sante,
L. Dudy,
J. Gabel,
M. Stübinger,
M. Kamp,
Y. Huang,
M. Capone,
M. -A. Husanu,
V. Strocov,
G. Sangiovanni,
M. Sing,
R. Claessen
Abstract:
Upon reduction of the film thickness we observe a metal-insulator transition in epitaxially stabilized, spin-orbit coupled SrIrO$_3$ ultrathin films. By comparison of the experimental electronic dispersions with density functional theory at various levels of complexity we identify the leading microscopic mechanisms, i.e., a dimensionality-induced re-adjustment of octahedral rotations, magnetism, a…
▽ More
Upon reduction of the film thickness we observe a metal-insulator transition in epitaxially stabilized, spin-orbit coupled SrIrO$_3$ ultrathin films. By comparison of the experimental electronic dispersions with density functional theory at various levels of complexity we identify the leading microscopic mechanisms, i.e., a dimensionality-induced re-adjustment of octahedral rotations, magnetism, and electronic correlations. The astonishing resemblance of the band structure in the two-dimensional limit to that of bulk Sr$_2$IrO$_4$ opens new avenues to unconventional superconductivity by "clean" electron doping through electric field gating.
△ Less
Submitted 29 June, 2017;
originally announced June 2017.
-
Controlling the micellar morphology of binary PEO-PCL block copolymers in water-THF through controlled blending
Authors:
P. Schuetz,
M. J. Greenall,
J. Bent,
S. Furzeland,
D. Atkins,
M. F. Butler,
T. C. B. McLeish,
D. M. A. Buzza
Abstract:
We study both experimentally and theoretically the self-assembly of binary block copolymers in dilute solution, where self-assembly is triggered by changing the solvent from the common good solvent THF to the selective solvent water, and where the two species on their own in water form vesicles and spherical micelles respectively. We find that in water the inter-micellar exchange of these block co…
▽ More
We study both experimentally and theoretically the self-assembly of binary block copolymers in dilute solution, where self-assembly is triggered by changing the solvent from the common good solvent THF to the selective solvent water, and where the two species on their own in water form vesicles and spherical micelles respectively. We find that in water the inter-micellar exchange of these block copolymers is very slow so that the self-assembled structures are in local but not global equilibrium (i.e., they are non-ergodic). This opens up the possibility of controlling micelle morphology both thermodynamically and kinetically. Specifically, when the two species are first dissolved in THF before mixing and self-assembly (`premixing') by dilution with water, the morphology is found to depend on the mixing ratio of the two species, going gradually from vesicles via `bulbed' rods, rings, Y-junctions and finally to spherical micelles as we increase the proportion of the sphere-formers. On the other hand, if the two species are first partially self-assembled (by partial exchange of the solvent with water) before mixing and further self-assembly (`intermediate mixing'), novel metastable structures, including nanoscopic pouches, emerge. These experimental results are corroborated by self-consistent field theory calculations (SCFT) which reproduce the sequence of morphologies seen in the pre-mixing experiments. SCFT also reveals a clear coupling between polymer composition and aggregate curvature, with regions of positive and negative curvature being stabilized by an enrichment and depletion of sphere formers respectively. Our study demonstrates that both thermodynamic and kinetic blending of block copolymers are effective design parameters to control the resulting structures and allow us to access a much richer range of nano-morphologies than is possible with monomodal block copolymer solutions.
△ Less
Submitted 27 June, 2011;
originally announced June 2011.
-
Controlling the self-assembly of binary copolymer mixtures in solution through molecular architecture
Authors:
M. J. Greenall,
P. Schuetz,
S. Furzeland,
D. Atkins,
D. M. A. Buzza,
M. F. Butler,
T. C. B. McLeish
Abstract:
We present a combined experimental and theoretical study on the role of copolymer architecture in the self-assembly of binary PEO-PCL mixtures in water-THF, and show that altering the chain geometry and composition of the copolymers can control the form of the self-assembled structures and lead to the formation of novel aggregates. First, using transmission electron microscopy and turbidity measur…
▽ More
We present a combined experimental and theoretical study on the role of copolymer architecture in the self-assembly of binary PEO-PCL mixtures in water-THF, and show that altering the chain geometry and composition of the copolymers can control the form of the self-assembled structures and lead to the formation of novel aggregates. First, using transmission electron microscopy and turbidity measurements, we study a mixture of sphere-forming and lamella-forming PEO-PCL copolymers, and show that increasing the molecular weight of the lamella-former at a constant ratio of its hydrophilic and hydrophobic components leads to the formation of highly-curved structures even at low sphere-former concentrations. This result is explained using a simple argument based on the effective volumes of the two sections of the diblock and is reproduced in a coarse-grained mean-field model: self-consistent field theory (SCFT). Using further SCFT calculations, we study the distribution of the two copolymer species within the individual aggregates and discuss how this affects the self-assembled structures. We also investigate a binary mixture of lamella-formers of different molecular weights, and find that this system forms vesicles with a wall thickness intermediate to those of the vesicles formed by the two copolymers individually. This result is also reproduced using SCFT. Finally, a mixture of sphere-former and a copolymer with a large hydrophobic block is shown to form a range of structures, including novel elongated vesicles.
△ Less
Submitted 13 April, 2011;
originally announced April 2011.
-
Multistep greedy algorithm identifies community structure in real-world and computer-generated networks
Authors:
Philipp Schuetz,
Amedeo Caflisch
Abstract:
We have recently introduced a multistep extension of the greedy algorithm for modularity optimization. The extension is based on the idea that merging l pairs of communities (l>1) at each iteration prevents premature condensation into few large communities. Here, an empirical formula is presented for the choice of the step width l that generates partitions with (close to) optimal modularity for…
▽ More
We have recently introduced a multistep extension of the greedy algorithm for modularity optimization. The extension is based on the idea that merging l pairs of communities (l>1) at each iteration prevents premature condensation into few large communities. Here, an empirical formula is presented for the choice of the step width l that generates partitions with (close to) optimal modularity for 17 real-world and 1100 computer-generated networks. Furthermore, an in-depth analysis of the communities of two real-world networks (the metabolic network of the bacterium E. coli and the graph of coappearing words in the titles of papers coauthored by Martin Karplus) provides evidence that the partition obtained by the multistep greedy algorithm is superior to the one generated by the original greedy algorithm not only with respect to modularity but also according to objective criteria. In other words, the multistep extension of the greedy algorithm reduces the danger of getting trapped in local optima of modularity and generates more reasonable partitions.
△ Less
Submitted 25 September, 2008;
originally announced September 2008.
-
Efficient modularity optimization by multistep greedy algorithm and vertex mover refinement
Authors:
Philipp Schuetz,
Amedeo Caflisch
Abstract:
Identifying strongly connected substructures in large networks provides insight into their coarse-grained organization. Several approaches based on the optimization of a quality function, e.g., the modularity, have been proposed. We present here a multistep extension of the greedy algorithm (MSG) that allows the merging of more than one pair of communities at each iteration step. The essential i…
▽ More
Identifying strongly connected substructures in large networks provides insight into their coarse-grained organization. Several approaches based on the optimization of a quality function, e.g., the modularity, have been proposed. We present here a multistep extension of the greedy algorithm (MSG) that allows the merging of more than one pair of communities at each iteration step. The essential idea is to prevent the premature condensation into few large communities. Upon convergence of the MSG a simple refinement procedure called "vertex mover" (VM) is used for reassigning vertices to neighboring communities to improve the final modularity value. With an appropriate choice of the step width, the combined MSG-VM algorithm is able to find solutions of higher modularity than those reported previously. The multistep extension does not alter the scaling of computational cost of the greedy algorithm.
△ Less
Submitted 2 May, 2008; v1 submitted 7 December, 2007;
originally announced December 2007.
-
The DIRAC experiment at CERN
Authors:
Ch. P. Schuetz
Abstract:
The DIRAC experiment at CERN aims to measure the lifetime of the pionium atom ($A_{2π}$), a $π^+π^-$ bound state with an accuracy of 10%. The experimental setup consists of a high precision magnetic double arm spectrometer, located at the high intensity proton beam of the CERN Proton Synchrotron. This measurement will provide - in a model independent way - the S-wave pion scattering length diffe…
▽ More
The DIRAC experiment at CERN aims to measure the lifetime of the pionium atom ($A_{2π}$), a $π^+π^-$ bound state with an accuracy of 10%. The experimental setup consists of a high precision magnetic double arm spectrometer, located at the high intensity proton beam of the CERN Proton Synchrotron. This measurement will provide - in a model independent way - the S-wave pion scattering length difference $|a_0 - a_2|$ with 5% precision.
△ Less
Submitted 12 May, 2003;
originally announced May 2003.
