Showing 1–7 of 7 results for author: Schoofs, F

Comment on "Comments regarding "Transonic dislocation propagation in diamond" by Katagiri, et al. (Science 382, 69-72, 2023)" by Hawreliak, et al. (arXiv:2401.04213)

Authors: Kento Katagiri, Tatiana Pikuz, Lichao Fang, Bruno Albertazzi, Shunsuke Egashira, Yuichi Inubushi, Genki Kamimura, Ryosuke Kodama, Michel Koenig, Bernard Kozioziemski, Gooru Masaoka, Kohei Miyanishi, Hirotaka Nakamura, Masato Ota, Gabriel Rigon, Youichi Sakawa, Takayoshi Sano, Frank Schoofs, Zoe J. Smith, Keiichi Sueda, Tadashi Togashi, Tommaso Vinci, Yifan Wang, Makina Yabashi, Toshinori Yabuuchi , et al. (2 additional authors not shown)

Abstract: In their comment (1), Hawreliak et al. claims that our observation of stacking fault formation and transonic dislocation propagation in diamond (2) is not valid as they interpret the observed features as cracks. In this response letter, we describe our rationale for interpreting the observed features as stacking faults. We also address other points raised in their comments, including the clarifica… ▽ More In their comment (1), Hawreliak et al. claims that our observation of stacking fault formation and transonic dislocation propagation in diamond (2) is not valid as they interpret the observed features as cracks. In this response letter, we describe our rationale for interpreting the observed features as stacking faults. We also address other points raised in their comments, including the clarifications of how the results of Makarov et al. (3) are not in conflict with our study. △ Less

Submitted 9 September, 2024; originally announced September 2024.

Comments: Comment on arXiv:2401.04213. 10 pages, 2 figures

Dark-Field X-ray Microscopy for 2D and 3D imaging of Microstructural Dynamics at the European X-ray Free Electron Laser

Authors: Sara J. Irvine, Kento Katagiri, Trygve M. Ræder, Ulrike Boesenberg, Darshan Chalise, Jade I. Stanton, Dayeeta Pal, Jörg Hallmann, Gabriele Ansaldi, Felix Brauße, Jon H. Eggert, Lichao Fang, Eric Folsom, Morten Haubro, Theodor S. Holstad, Anders Madsen, Johannes Möller, Martin M. Nielsen, Henning F. Poulsen, Jan-Etienne Pudell, Angel Rodriguez-Fernandez, Frank Schoofs, Frank Seiboth, Yifan Wang, Wonhyuk Jo , et al. (4 additional authors not shown)

Abstract: Dark field X-ray microscopy (DXFM) can visualize microstructural distortions in bulk crystals. Using the femtosecond X-ray pulses generated by X-ray free-electron lasers (XFEL), DFXM can achieve sub-μm spatial resolution and <100 fs time resolution simultaneously. In this paper, we demonstrate ultrafast DFXM measurements at the European XFEL to visualize an optically-driven longitudinal strain wav… ▽ More Dark field X-ray microscopy (DXFM) can visualize microstructural distortions in bulk crystals. Using the femtosecond X-ray pulses generated by X-ray free-electron lasers (XFEL), DFXM can achieve sub-μm spatial resolution and <100 fs time resolution simultaneously. In this paper, we demonstrate ultrafast DFXM measurements at the European XFEL to visualize an optically-driven longitudinal strain wave propagating through a diamond single crystal. We also present two DFXM scanning modalities that are new to the XFEL sources: spatially 3D and 2D axial-strain scans with sub-μm spatial resolution. With this progress in XFEL-based DFXM, we discuss new opportunities to study multi-timescale spatio-temporal dynamics of microstructures. △ Less

Submitted 18 September, 2024; v1 submitted 7 November, 2023; originally announced November 2023.

Transonic Dislocation Propagation in Diamond

Authors: Kento Katagiri, Tatiana Pikuz, Lichao Fang, Bruno Albertazzi, Shunsuke Egashira, Yuichi Inubushi, Genki Kamimura, Ryosuke Kodama, Michel Koenig, Bernard Kozioziemski, Gooru Masaoka, Kohei Miyanishi, Hirotaka Nakamura, Masato Ota, Gabriel Rigon, Youichi Sakawa, Takayoshi Sano, Frank Schoofs, Zoe J. Smith, Keiichi Sueda, Tadashi Togashi, Tommaso Vinci, Yifan Wang, Makina Yabashi, Toshinori Yabuuchi , et al. (2 additional authors not shown)

Abstract: The motion of line defects (dislocations) has been studied for over 60 years but the maximum speed at which they can move is unresolved. Recent models and atomistic simulations predict the existence of a limiting velocity of dislocation motions between the transonic and subsonic ranges at which the self-energy of dislocation diverges, though they do not deny the possibility of the transonic disloc… ▽ More The motion of line defects (dislocations) has been studied for over 60 years but the maximum speed at which they can move is unresolved. Recent models and atomistic simulations predict the existence of a limiting velocity of dislocation motions between the transonic and subsonic ranges at which the self-energy of dislocation diverges, though they do not deny the possibility of the transonic dislocations. We use femtosecond x-ray radiography to track ultrafast dislocation motion in shock-compressed single-crystal diamond. By visualizing stacking faults extending faster than the slowest sound wave speed of diamond, we show the evidence of partial dislocations at their leading edge moving transonically. Understanding the upper limit of dislocation mobility in crystals is essential to accurately model, predict, and control the mechanical properties of materials under extreme conditions. △ Less

Submitted 6 October, 2023; v1 submitted 7 March, 2023; originally announced March 2023.

Simultaneous Bright- and Dark-Field X-ray Microscopy at X-ray Free Electron Lasers

Authors: Leora E. Dresselhaus-Marais, Bernard Kozioziemski, Theodor S. Holstad, Trygve Magnus Ræder, Matthew Seaberg, Daewoong Nam, Sangsoo Kim, Sean Breckling, Seonghyuk Choi, Matthieu Chollet, Philip K. Cook, Eric Folsom, Eric Galtier, Arnulfo Gonzalez, Tais Gorhover, Serge Guillet, Kristoffer Haldrup, Marylesa Howard, Kento Katagiri, Seonghan Kim, Sunam Kim, Sungwon Kim, Hyunjung Kim, Erik Bergback Knudsen, Stephan Kuschel , et al. (18 additional authors not shown)

Abstract: The structures, strain fields, and defect distributions in solid materials underlie the mechanical and physical properties across numerous applications. Many modern microstructural microscopy tools characterize crystal grains, domains and defects required to map lattice distortions or deformation, but are limited to studies of the (near) surface. Generally speaking, such tools cannot probe the str… ▽ More The structures, strain fields, and defect distributions in solid materials underlie the mechanical and physical properties across numerous applications. Many modern microstructural microscopy tools characterize crystal grains, domains and defects required to map lattice distortions or deformation, but are limited to studies of the (near) surface. Generally speaking, such tools cannot probe the structural dynamics in a way that is representative of bulk behavior. Synchrotron X-ray diffraction based imaging has long mapped the deeply embedded structural elements, and with enhanced resolution, Dark Field X-ray Microscopy (DFXM) can now map those features with the requisite nm-resolution. However, these techniques still suffer from the required integration times due to limitations from the source and optics. This work extends DFXM to X-ray free electron lasers, showing how the $10^{12}$ photons per pulse available at these sources offer structural characterization down to 100 fs resolution (orders of magnitude faster than current synchrotron images). We introduce the XFEL DFXM setup with simultaneous bright field microscopy to probe density changes within the same volume. This work presents a comprehensive guide to the multi-modal ultrafast high-resolution X-ray microscope that we constructed and tested at two XFELs, and shows initial data demonstrating two timing strategies to study associated reversible or irreversible lattice dynamics. △ Less

Submitted 5 September, 2023; v1 submitted 15 October, 2022; originally announced October 2022.

Journal ref: Scientific Reports, 13, 17573 (2023)

Radiation Damage and Thermal Recovery of Perovskite Superconductor Yttrium Barium Copper Oxide

Authors: A. Khobnya, M. E. Pek, G. Greaves, M. Danaie, G. D. Brittles, S. E. Donnelly, F. Schoofs, A. Reilly, P. D. Edmondson, S. Pedrazzini

Abstract: High temperature superconducting materials are being considered to generate the magnetic fields required for the confinement of plasma in fusion reactors. The present study aims to assess the microstructural degradation resulting from ion implantation at room temperature under two implantation conditions in Yttrium Barium Copper Oxide (YBCO) tapes. Xray Diffraction (XRD) and high resolution charac… ▽ More High temperature superconducting materials are being considered to generate the magnetic fields required for the confinement of plasma in fusion reactors. The present study aims to assess the microstructural degradation resulting from ion implantation at room temperature under two implantation conditions in Yttrium Barium Copper Oxide (YBCO) tapes. Xray Diffraction (XRD) and high resolution characterisation techniques including Atom Probe Tomography (APT) and Transmission Electron Microscopy (TEM) analyses were used to correlate alterations in superconducting behaviour measured using a Magnetic Properties Measurement System (MPMS) to amorphization and recovery caused by ion implantation. TEM analysis was performed to depth profile the degree of crystallinity (or lack thereof) on irradiated samples. SRIM predicted the damage depth at 900 nm below the sample surface of the 2 MeV Xe implanted sample and 450 nm beneath the surface of the 0.6 MeV Xe implanted sample. 2 MeV Xe implantation caused the superconducting temperature to decrease by 10 K and the critical current density to display a 10 fold reduction. Post irradiation heat treatments up to 600C caused recrystallisation of the irradiated layer, but also oxygen loss and alterations in grain size. The recrystallised grain orientation was random in TEM lamellae, however, bulk samples re-grew along the original crystal orientation provided that some of the original material was not amorphized (ie if they nucleated on crystalline YBCO). This is extremely promising for the thermal recovery of tokamak components. △ Less

Submitted 10 March, 2020; v1 submitted 24 October, 2018; originally announced October 2018.

Using atom probe tomography to understand Schottky barrier height pinning at the ZnO:Al / SiO2 / Si interface

Authors: R. Jaramillo, Amanda Youssef, Austin Akey, Frank Schoofs, Shriram Ramanathan, Tonio Buonassisi

Abstract: We use electronic transport and atom probe tomography to study ZnO:Al / SiO2 / Si Schottky junctions on lightly-doped n- and p-type Si. We vary the carrier concentration in the the ZnO:Al films by two orders of magnitude but the Schottky barrier height remains constant, consistent with Fermi level pinning seen in metal / Si junctions. Atom probe tomography shows that Al segregates to the interface… ▽ More We use electronic transport and atom probe tomography to study ZnO:Al / SiO2 / Si Schottky junctions on lightly-doped n- and p-type Si. We vary the carrier concentration in the the ZnO:Al films by two orders of magnitude but the Schottky barrier height remains constant, consistent with Fermi level pinning seen in metal / Si junctions. Atom probe tomography shows that Al segregates to the interface, so that the ZnO:Al at the junction is likely to be metallic even when the bulk of the ZnO:Al film is semiconducting. We hypothesize that Fermi level pinning is connected to the insulator-metal transition in doped ZnO, and that controlling this transition may be key to un-pinning the Fermi level in oxide / Si Schottky junctions. △ Less

Submitted 29 October, 2015; originally announced October 2015.

Journal ref: Phys. Rev. Applied 6, 034016 (2016)

Hall effect measurements on epitaxial SmNiO3 thin films and implications for antiferromagnetism

Authors: Sieu D. Ha, R. Jaramillo, D. M. Silevitch, Frank Schoofs, Kian Kerman, John D. Baniecki, Shriram Ramanathan

Abstract: The rare-earth nickelates (RNiO3) exhibit interesting phenomena such as unusual antiferromagnetic order at wavevector q = (1/2, 0, 1/2) and a tunable insulator-metal transition that are subjects of active research. Here we present temperature-dependent transport measurements of the resistivity, magnetoresistance, Seebeck coefficient, and Hall coefficient (RH) of epitaxial SmNiO3 thin films with va… ▽ More The rare-earth nickelates (RNiO3) exhibit interesting phenomena such as unusual antiferromagnetic order at wavevector q = (1/2, 0, 1/2) and a tunable insulator-metal transition that are subjects of active research. Here we present temperature-dependent transport measurements of the resistivity, magnetoresistance, Seebeck coefficient, and Hall coefficient (RH) of epitaxial SmNiO3 thin films with varying oxygen stoichiometry. We find that from room temperature through the high temperature insulator-metal transition, the Hall coefficient is hole-like and the Seebeck coefficient is electron-like. At low temperature the Néel transition induces a crossover in the sign of RH to electron-like, similar to the effects of spin density wave formation in metallic systems but here arising in an insulating phase ~200 K below the insulator-metal transition. We propose that antiferromagnetism can be stabilized by bandstructure even in insulating phases of correlated oxides, such as RNiO3, that fall between the limits of strong and weak electron correlation. △ Less

Submitted 5 March, 2013; v1 submitted 9 January, 2013; originally announced January 2013.

Comments: *Equally contributing first authors

Journal ref: Phys. Rev. B 87, 125150 (2013)