-
Combined electrical transport and capacitance spectroscopy of a ${\mathrm{MoS_2-LiNbO_3}}$ field effect transistor
Authors:
W. Michailow,
F. J. R. Schülein,
B. Möller,
E. Preciado,
A. E. Nguyen,
G. v. Son,
J. Mann,
A. L. Hörner,
A. Wixforth,
L. Bartels,
H. J. Krenner
Abstract:
We have measured both the current-voltage ($I_\mathrm{SD}$-$V_\mathrm{GS}$) and capacitance-voltage ($C$-$V_\mathrm{GS}$) characteristics of a $\mathrm{MoS_2-LiNbO_3}$ field effect transistor. From the measured capacitance we calculate the electron surface density and show that its gate voltage dependence follows the theoretical prediction resulting from the two-dimensional free electron model. Th…
▽ More
We have measured both the current-voltage ($I_\mathrm{SD}$-$V_\mathrm{GS}$) and capacitance-voltage ($C$-$V_\mathrm{GS}$) characteristics of a $\mathrm{MoS_2-LiNbO_3}$ field effect transistor. From the measured capacitance we calculate the electron surface density and show that its gate voltage dependence follows the theoretical prediction resulting from the two-dimensional free electron model. This model allows us to fit the measured $I_\mathrm{SD}$-$V_\mathrm{GS}$ characteristics over the \emph{entire range} of $V_\mathrm{GS}$. Combining this experimental result with the measured current-voltage characteristics, we determine the field effect mobility as a function of gate voltage. We show that for our device this improved combined approach yields significantly smaller values (more than a factor of 4) of the electron mobility than the conventional analysis of the current-voltage characteristics only.
△ Less
Submitted 2 January, 2017;
originally announced January 2017.
-
Fourier synthesis of radio frequency nanomechanical pulses with different shapes
Authors:
Florian J. R. Schülein,
Eugenio Zallo,
Paola Atkinson,
Oliver G. Schmidt,
Rinaldo Trotta,
Armando Rastelli,
Achim Wixforth,
Hubert J. Krenner
Abstract:
The concept of Fourier synthesis is heavily employed in both consumer electronic products and fundamental research. In the latter, pulse shaping is key to dynamically initialize, probe and manipulate the state of classical or quantum systems. In nuclear magnetic resonance, for instance, shaped pulses have a long-standing tradition and the underlying fundamental concepts have subsequently been succ…
▽ More
The concept of Fourier synthesis is heavily employed in both consumer electronic products and fundamental research. In the latter, pulse shaping is key to dynamically initialize, probe and manipulate the state of classical or quantum systems. In nuclear magnetic resonance, for instance, shaped pulses have a long-standing tradition and the underlying fundamental concepts have subsequently been successfully extended to optical frequencies and even to implement quantum gate operations. Transferring these paradigms to nanomechanical systems requires tailored nanomechanical waveforms. Here, we report on an additive Fourier synthesizer for nanomechanical waveforms based on monochromatic surface acoustic waves. As a proof of concept, we electrically synthesize four different elementary nanomechanical waveforms from a fundamental surface acoustic wave at $ f_1 \sim 150$ MHz using a superposition of up to three discrete harmonics $f_n$. We employ these shaped pulses to interact with an individual sensor quantum dot and detect their deliberately and temporally modulated strain component via the opto-mechanical quantum dot response. Importantly, and in contrast to the direct mechanical actuation by bulk piezoactuators, surface acoustic waves provide much higher frequencies (> 20 GHz) to resonantly drive mechanical motion. Thus, our technique uniquely allows coherent mechanical control of localized vibronic modes of optomechanical crystals, even in the quantum limit when cooled to the vibrational ground state.
△ Less
Submitted 12 January, 2016; v1 submitted 2 December, 2014;
originally announced December 2014.
-
Dynamic Acoustic Control of Individual Optically Active Quantum Dot-like Emission Centers in Heterostructure Nanowires
Authors:
Matthias Weiß,
Jörg B. Kinzel,
Florian J. R. Schülein,
Michael Heigl,
Daniel Rudolph,
Stefanie Morkötter,
Markus Döblinger,
Max Bichler,
Gerhard Abstreiter,
Jonathan J. Finley,
Gregor Koblmüller,
Achim Wixforth,
Hubert J. Krenner
Abstract:
We probe and control the optical properties of emission centers forming in radial het- erostructure GaAs-Al0.3Ga0.7As nanowires and show that these emitters, located in Al0.3Ga0.7As layers, can exhibit quantum-dot like characteristics. We employ a radio frequency surface acoustic wave to dynamically control their emission energy and occupancy state on a nanosec- ond timescale. In the spectral osci…
▽ More
We probe and control the optical properties of emission centers forming in radial het- erostructure GaAs-Al0.3Ga0.7As nanowires and show that these emitters, located in Al0.3Ga0.7As layers, can exhibit quantum-dot like characteristics. We employ a radio frequency surface acoustic wave to dynamically control their emission energy and occupancy state on a nanosec- ond timescale. In the spectral oscillations we identify unambiguous signatures arising from both the mechanical and electrical component of the surface acoustic wave. In addition, differ- ent emission lines of a single quantum dot exhibit pronounced anti-correlated intensity oscilla- tions during the acoustic cycle. These arise from a dynamically triggered carrier extraction out of the quantum dot to a continuum in the radial heterostructure. Using finite element modeling and Wentzel-Kramers-Brillouin theory we identify quantum tunneling as the underlying mech- anism. These simulation results quantitatively reproduce the observed switching and show that in our systems these quantum dots are spatially separated from the continuum by > 10.5 nm.
△ Less
Submitted 8 October, 2014;
originally announced October 2014.
-
Radio frequency occupancy state control of a single nanowire quantum dot
Authors:
Matthias Weiß,
Florian J. R. Schülein,
Jörg B. Kinzel,
Michael Heigl,
Daniel Rudolph,
Max Bichler,
Gerhard Abstreiter,
Jonathan J. Finley,
Achim Wixforth,
Gregor Koblmüller,
Hubert J. Krenner
Abstract:
The excitonic occupancy state of a single, nanowire-based, heterostructure quantum dot is dynamically programmed by a surface acoustic wave. The quantum dot is formed by an interface or thickness fluctuation of a GaAs QW embedded in a AlGaAs shell of a GaAs-AlGaAs core-shell nanowire. As we tune the time at which carriers are photogenerated during the acoustic cycle, we find pronounced intensity o…
▽ More
The excitonic occupancy state of a single, nanowire-based, heterostructure quantum dot is dynamically programmed by a surface acoustic wave. The quantum dot is formed by an interface or thickness fluctuation of a GaAs QW embedded in a AlGaAs shell of a GaAs-AlGaAs core-shell nanowire. As we tune the time at which carriers are photogenerated during the acoustic cycle, we find pronounced intensity oscillations of neutral and negatively charged excitons. At high acoustic power levels these oscillations become anticorrelated which enables direct acoustic programming of the dot's charge configuration, emission intensity and emission wavelength. Numerical simulations confirm that the observed modulations arise from acoustically controlled modulations of the electron and electron-hole-pair concentrations at the position of the quantum dot.
△ Less
Submitted 23 May, 2014; v1 submitted 11 April, 2014;
originally announced April 2014.
-
Acoustically regulated carrier injection into a single optically active quantum dot
Authors:
Florian J. R. Schülein,
Kai Müller,
Max Bichler,
Gregor Koblmüller,
Jonathan J. Finley,
Achim Wixforth,
Hubert J. Krenner
Abstract:
We study the carrier injection into a single InGaAs/GaAs quantum dot regulated by a radio frequency surface acoustic wave. We find that the time of laser excitation during the acoustic cycle programs both the emission intensities and time of formation of neutral $(X^0)$ and negatively charged $(X^-)$ excitons. We identify underlying, characteristic formation pathways of both few-particle states in…
▽ More
We study the carrier injection into a single InGaAs/GaAs quantum dot regulated by a radio frequency surface acoustic wave. We find that the time of laser excitation during the acoustic cycle programs both the emission intensities and time of formation of neutral $(X^0)$ and negatively charged $(X^-)$ excitons. We identify underlying, characteristic formation pathways of both few-particle states in the time-domain experiments and show that both exciton species can be formed either with the optical pump or at later times by injection of single electrons and holes "surfing" the acoustic wave. All experimental observations are in excellent agreement with calculated electron and hole trajectories in the plane of the two-dimensional wetting layer which is dynamically modulated by the acoustically induced piezoelectric potentials. Taken together, our findings provide insight on both the onset of acousto-electric transport of electrons and holes and their conversion into the optical domain after regulated injection into a single quantum dot emitter.
△ Less
Submitted 25 June, 2013;
originally announced June 2013.
-
Surface acoustic wave mediated carrier injection into individual quantum post nano emitters
Authors:
Stefan Völk,
Florian Knall,
Florian J. R. Schülein,
Tuan A. Truong,
Hyochul Kim,
Pierre M. Petroff,
Achim Wixforth,
Hubert J. Krenner
Abstract:
Acousto-electric charge conveyance induced by a surface acoustic wave is employed to dissociate photogenerated excitons. Over macroscopic distances, both electrons and holes are injected \emph{sequentially} into a remotely positioned, isolated and high-quality quantum emitter, a self-assembled quantum post. This process is found to be highly efficient and to exhibit improved stability at high acou…
▽ More
Acousto-electric charge conveyance induced by a surface acoustic wave is employed to dissociate photogenerated excitons. Over macroscopic distances, both electrons and holes are injected \emph{sequentially} into a remotely positioned, isolated and high-quality quantum emitter, a self-assembled quantum post. This process is found to be highly efficient and to exhibit improved stability at high acoustic powers when compared to direct optical pumping at the position of the quantum post. These characteristics are attributed to the wide matrix quantum well in which charge conveyance occurs and to the larger number of carriers available for injection in the remote configuration, respectively. The emission of such pumped quantum posts is dominated by recombination of neutral excitons and fully directional when the propagation direction of the SAW and the position of the quantum post are reversed.
△ Less
Submitted 19 May, 2012;
originally announced May 2012.
-
Surface acoustic wave controlled charge dynamics in a thin InGaAs quantum well
Authors:
Florian J. R. Schülein,
Jens Pustiowski,
Kai Müller,
Max Bichler,
Gregor Koblmüller,
Jonathan J. Finley,
Achim Wixforth,
Hubert J. Krenner
Abstract:
We experimentally study the optical emission of a thin quantum well and its dynamic modulation by a surface acoustic wave (SAW). We observe a characteristic transition of the modulation from one maximum to two maxima per SAW cycle as the acoustic power is increased which we find in good agreement with numer- ical calculations of the SAW controlled carrier dynamics. At low acoustic powers the carri…
▽ More
We experimentally study the optical emission of a thin quantum well and its dynamic modulation by a surface acoustic wave (SAW). We observe a characteristic transition of the modulation from one maximum to two maxima per SAW cycle as the acoustic power is increased which we find in good agreement with numer- ical calculations of the SAW controlled carrier dynamics. At low acoustic powers the carrier mobilites limit electron-hole pair dissociation, whereas at high power levels the induced electric fields give rise to efficient acousto-electric carrier transport. The direct comparison between the experimental data and the numerical simulations provide an absolute calibration of the local SAW phase.
△ Less
Submitted 4 May, 2012;
originally announced May 2012.
-
Surface acoustic wave controlled carrier injection into self-assembled quantum dots and quantum posts
Authors:
Hubert J. Krenner,
Stefan Völk,
Florian J. R. Schülein,
Florian Knall,
Achim Wixforth,
Dirk Reuter,
Andreas D. Wieck,
Hyochul Kim,
Tuan A. Truong,
Pierre M. Petroff
Abstract:
We report on recent progress in the acousto-electrical control of self-assembled quantum dot and quantum post using radio frequency surface acoustic waves (SAWs). We show that the occupancy state of these optically active nanostructures can be controlled via the SAW-induced dissociation of photogenerated excitons and the resulting sequential bipolar carrier injection which strongly favors the form…
▽ More
We report on recent progress in the acousto-electrical control of self-assembled quantum dot and quantum post using radio frequency surface acoustic waves (SAWs). We show that the occupancy state of these optically active nanostructures can be controlled via the SAW-induced dissociation of photogenerated excitons and the resulting sequential bipolar carrier injection which strongly favors the formation of neutral excitons for quantum posts in contrast to conventional quantum dots. We demonstrate high fidelity preparation of the neutral biexciton which makes this approach suitable for deterministic entangled photon pair generation. The SAW driven acoustic charge conveyance is found to be highly efficient within the wide quantum well surrounding the quantum posts. Finally we present the direct observation of acoustically triggered carrier injection into remotely positioned, individual quantum posts which is required for a low-jitter SAW-triggered single photon source.
△ Less
Submitted 20 October, 2011;
originally announced October 2011.
-
Recent progress towards acoustically mediated carrier injection into individual nanostructures for single photon generation
Authors:
Stefan Völk,
Florian J. R. Schülein,
Florian Knall,
Achim Wixforth,
Hubert. J. Krenner,
Arne Laucht,
Jonathan J. Finley,
Juha Riikonen,
Marco Mattila,
Markku Sopanen,
Harri Lipsanen,
Jun He,
Tuan A. Truong,
Hyochul Kim,
Pierre M. Petroff
Abstract:
We report on recent progress towards single photon sources based on quantum dot and quantum post nanostructures which are manipulated using surface acoustic waves. For this concept acoustic charge conveyance in a quantum well is used to spatially separate electron and hole pairs and transport these in the plane of the quantum well. When conveyed to the location of a quantum dot or quantum post the…
▽ More
We report on recent progress towards single photon sources based on quantum dot and quantum post nanostructures which are manipulated using surface acoustic waves. For this concept acoustic charge conveyance in a quantum well is used to spatially separate electron and hole pairs and transport these in the plane of the quantum well. When conveyed to the location of a quantum dot or quantum post these carriers are sequentially captured into the confined levels. Their radiative decays gives rise to the emission of a train of single photons. Three different approaches using (i) strain- induced and (ii) self-assembled quantum dots, and (iii) self-assembled quantum posts are discussed and their application potential is discussed. First devices and initial experiments towards the realization of such an acoustically driven single photon source are presented and remote acoustically triggered injection into few individual emitters is demonstrated.
△ Less
Submitted 23 November, 2010;
originally announced November 2010.
-
Enhanced sequential carrier capture into individual quantum dots and quantum posts controlled by surface acoustic waves
Authors:
Stefan Völk,
Florian J. R. Schülein,
Florian Knall,
Dirk Reuter,
Andreas D. Wieck,
Tuan A. Truong,
Hyochul Kim,
Pierre M. Petroff,
Achim Wixforth,
Hubert J. Krenner
Abstract:
Individual self-assembled Quantum Dots and Quantum Posts are studied under the influence of a surface acoustic wave. In optical experiments we observe an acoustically induced switching of the occupancy of the nanostructures along with an overall increase of the emission intensity. For Quantum Posts, switching occurs continuously from predominantely charged excitons (dissimilar number of electrons…
▽ More
Individual self-assembled Quantum Dots and Quantum Posts are studied under the influence of a surface acoustic wave. In optical experiments we observe an acoustically induced switching of the occupancy of the nanostructures along with an overall increase of the emission intensity. For Quantum Posts, switching occurs continuously from predominantely charged excitons (dissimilar number of electrons and holes) to neutral excitons (same number of electrons and holes) and is independent on whether the surface acoustic wave amplitude is increased or decreased. For quantum dots, switching is non-monotonic and shows a pronounced hysteresis on the amplitude sweep direction. Moreover, emission of positively charged and neutral excitons is observed at high surface acoustic wave amplitudes. These findings are explained by carrier trapping and localization in the thin and disordered two-dimensional wetting layer on top of which Quantum Dots nucleate. This limitation can be overcome for Quantum Posts where acoustically induced charge transport is highly efficient in a wide lateral Matrix-Quantum Well.
△ Less
Submitted 19 November, 2010;
originally announced November 2010.
-
Direct observation of dynamic surface acoustic wave controlled carrier injection into single quantum posts using phase-resolved optical spectroscopy
Authors:
S. Völk,
F. Knall,
F. J. R. Schülein,
T. A. Truong,
H. Kim,
P. M. Petroff,
A. Wixforth,
H. J. Krenner
Abstract:
A versatile stroboscopic technique based on active phase-locking of a surface acoustic wave to picosecond laser pulses is used to monitor dynamic acoustoelectric effects. Time-integrated multi-channel detection is applied to probe the modulation of the emission of a quantum well for different frequencies of the surface acoustic wave. For quantum posts we resolve dynamically controlled generation o…
▽ More
A versatile stroboscopic technique based on active phase-locking of a surface acoustic wave to picosecond laser pulses is used to monitor dynamic acoustoelectric effects. Time-integrated multi-channel detection is applied to probe the modulation of the emission of a quantum well for different frequencies of the surface acoustic wave. For quantum posts we resolve dynamically controlled generation of neutral and charged excitons and preferential injection of holes into localized states within the nanostructure.
△ Less
Submitted 26 November, 2010; v1 submitted 8 November, 2010;
originally announced November 2010.
-
Cascaded exciton emission of an individual strain-induced quantum dot
Authors:
F. J. R. Schülein,
A. Laucht,
J. Riikonen,
M. Mattila,
M. Sopanen,
H. Lipsanen,
J. J. Finley,
A. Wixforth,
H. J. Krenner
Abstract:
Single strain-induced quantum dots are isolated for optical experiments by selective removal of the inducing InP islands from the sample surface. Unpolarized emission of single, bi- and triexciton transitions are identified by power-dependent photoluminescence spectroscopy. Employing time-resolved experiments performed at different excitation powers we find a pronounced shift of the rise and dec…
▽ More
Single strain-induced quantum dots are isolated for optical experiments by selective removal of the inducing InP islands from the sample surface. Unpolarized emission of single, bi- and triexciton transitions are identified by power-dependent photoluminescence spectroscopy. Employing time-resolved experiments performed at different excitation powers we find a pronounced shift of the rise and decay times of these different transitions as expected from cascaded emission. Good agreement is found for a rate equation model for a three step cascade.
△ Less
Submitted 12 August, 2009;
originally announced August 2009.
