-
Radionuclide Production for Dose Verification in VHEE FLASH Radiotherapy
Authors:
Francesco Urso,
Federica Baffigi,
Esther Ciarrocchi,
Leonida Antonio Gizzi,
Petra Koester,
Luca Labate,
Matteo Morrocchi,
Simona Piccinini,
Martina Salvadori,
Maria Giuseppina Bisogni
Abstract:
This study explores the production of radionuclides in a PMMA (Polymethylmethacrylate) phantom irradiated with Very High Energy Electrons (VHEE) beams as a novel method for dose verification. In this work, Monte Carlo simulation studies using the Geant4 toolkit and experimental measurements with a VHEE beam produced by a laser-plasma accelerator were conducted. Specifically, the photonuclear produ…
▽ More
This study explores the production of radionuclides in a PMMA (Polymethylmethacrylate) phantom irradiated with Very High Energy Electrons (VHEE) beams as a novel method for dose verification. In this work, Monte Carlo simulation studies using the Geant4 toolkit and experimental measurements with a VHEE beam produced by a laser-plasma accelerator were conducted. Specifically, the photonuclear production of 11C, 15O and 13N is examined, with a detailed analysis of their spatial distribution, production yields and decay time
△ Less
Submitted 27 May, 2025;
originally announced May 2025.
-
Complex Valued Deep Operator Network (DeepONet) $[\mathcal{G}]$ for Three Dimensional Maxwell's Equations: $\mathcal{G} \in \mathbb{C}^{m \times n}$
Authors:
Qile Jiang,
Marc Salvadori,
Dale Ota,
Vijaya Shankar,
Khemraj Shukla
Abstract:
The Maxwell's equations, a system of linear partial differential equations (PDEs), describe the behavior of electric and magnetic fields in time and space and is essential for many important electromagnetic applications. Although numerical methods have been applied successfully in the past, the primary challenge in solving these equations arises from the frequency of electromagnetic fields, which…
▽ More
The Maxwell's equations, a system of linear partial differential equations (PDEs), describe the behavior of electric and magnetic fields in time and space and is essential for many important electromagnetic applications. Although numerical methods have been applied successfully in the past, the primary challenge in solving these equations arises from the frequency of electromagnetic fields, which depends on the shape and size of the objects to be resolved. The frequency dictates the grid size used for the spatial discretization of the PDEs. Since the domain of influence for these equations is compactly supported, even a small perturbation in frequency necessitates a new discretization of Maxwell's equations, resulting in substantial computational costs. In this work, we investigate the potential of neural operators, particularly the Deep Operator Network (DeepONet) and its variants, as a surrogate model for Maxwell's equations. Existing DeepONet implementations are restricted to real-valued data in $\mathbb{R}^n$, but since the time-harmonic Maxwell's equations yield solutions in the complex domain $\mathbb{C}^n$, a specialized architecture is required to handle complex algebra. We propose a formulation of DeepONet for complex data, define the forward pass in the complex domain, and adopt a reparametrized version of DeepONet for more efficient training. We also propose a unified framework to combine a plurality of DeepONets, trained for multiple electromagnetic field components, to incorporate the boundary condition. As shown by computational experiments, our method significantly enhances the efficiency of predicting scattered fields from a spherical object at arbitrary high frequencies.
△ Less
Submitted 27 November, 2024;
originally announced November 2024.
-
Laser Interactions with Gas Jets: EMP Emission and Nozzle Damage
Authors:
Philip Wykeham Bradford,
Valeria Ospina-Bohorquez,
Michael Ehret,
Jose-Luis Henares,
Pilar Puyuelo-Valdes,
Tomasz Chodukowski,
Tadeusz Pisarczyk,
Zofia Rusiniak,
Carlos Salgado-Lopez,
Christos Vlachos,
Massimiliano Sciscio,
Martina Salvadori,
Claudio Verona,
George Hicks,
Oliver Ettlinger,
Zulfikar Najmudin,
Jean-Raphael Marques,
Laurent Gremillet,
Joao Jorge Santos,
Fabrizio Consoli,
Vladimir Tikhonchuk
Abstract:
Understanding the physics of electromagnetic pulse emission and nozzle damage is critical for the long-term operation of laser experiments with gas targets, particularly at facilities looking to produce stable sources of radiation at high repetition rate. We present a theoretical model of plasma formation and electrostatic charging when high-power lasers are focused inside gases. The model can be…
▽ More
Understanding the physics of electromagnetic pulse emission and nozzle damage is critical for the long-term operation of laser experiments with gas targets, particularly at facilities looking to produce stable sources of radiation at high repetition rate. We present a theoretical model of plasma formation and electrostatic charging when high-power lasers are focused inside gases. The model can be used to estimate the amplitude of gigahertz electromagnetic pulses (EMPs) produced by the laser and the extent of damage to the gas jet nozzle. Looking at a range of laser and target properties relevant to existing high-power laser systems, we find that EMP fields of tens to hundreds of kV/m can be generated several metres from the gas jet. Model predictions are compared with measurements of EMP, plasma formation and nozzle damage from two experiments on the VEGA-3 laser and one experiment on the Vulcan Petawatt laser.
△ Less
Submitted 9 October, 2024; v1 submitted 28 March, 2024;
originally announced March 2024.
-
Laser-driven ion and electron acceleration from near-critical density gas targets: towards high-repetition rate operation in the 1 PW, sub-100 fs laser interaction regime
Authors:
V. Ospina-Bohórquez,
C. Salgado-López,
M. Ehret,
S. Malko,
M. Salvadori,
T. Pisarczyk,
T. Chodukowski,
Z. Rusiniak,
M. Krupka,
P. GuillonM. Lendrin,
G. Pérez-Callejo,
C. Vlachos,
F. Hannachi,
M. Tarisien,
F. Consoli,
C. Verona,
G. Prestopino,
J. Dostal,
R. Dudzak,
J. L. Henares,
J. I. Apiñaniz,
D. DeLuis,
A. Debayle,
J. Caron,
T. Ceccotti
, et al. (12 additional authors not shown)
Abstract:
Ion acceleration from gaseous targets driven by relativistic-intensity lasers was demonstrated as early as the late 90s, yet most of the experiments conducted to date have involved picosecond-duration, Nd:glass lasers operating at low repetition rate. Here, we present measurements on the interaction of ultraintense ($\sim 10^{20}\,\rm W\,cm^{-2}$, 1 PW), ultrashort ($\sim 70\,\rm fs$) Ti:Sa laser…
▽ More
Ion acceleration from gaseous targets driven by relativistic-intensity lasers was demonstrated as early as the late 90s, yet most of the experiments conducted to date have involved picosecond-duration, Nd:glass lasers operating at low repetition rate. Here, we present measurements on the interaction of ultraintense ($\sim 10^{20}\,\rm W\,cm^{-2}$, 1 PW), ultrashort ($\sim 70\,\rm fs$) Ti:Sa laser pulses with near-critical ($\sim 10^{20}\,\rm cm^{-3}$) helium gas jets, a debris-free targetry compatible with high ($\sim 1\,\rm Hz$) repetition rate operation. We provide evidence of $α$ particles being forward accelerated up to $\sim 2.7\,\rm MeV$ energy with a total flux of $\sim 10^{11}\,\rm sr^{-1}$ as integrated over $>0.1 \,\rm MeV$ energies and detected within a $0.5\,\rm mrad$ solid angle. We also report on on-axis emission of relativistic electrons with an exponentially decaying spectrum characterized by a $\sim 10\,\rm MeV$ slope, i.e., five times larger than the standard ponderomotive scaling. The total charge of these electrons with energy above 2 MeV is estimated to be of $\sim 1 \,\rm nC$, corresponding to $\sim 0.1\,\%$ of the laser drive energy. In addition, we observe the formation of a plasma channel, extending longitudinally across the gas density maximum and expanding radially with time. These results are well captured by large-scale particle-in-cell simulations, which reveal that the detected fast ions most likely originate from reflection off the rapidly expanding channel walls. The latter process is predicted to yield ion energies in the MeV range, which compare well with the measurements. Finally, direct laser acceleration is shown to be the dominant mechanism behind the observed electron energization.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Collisionless Shock Acceleration of protons in a plasma slab produced in a gas jet by the collision of two laser-driven hydrodynamic shockwaves
Authors:
J. -R. Marquès,
L. Lancia,
P. Loiseau,
P. Forestier-Colleoni,
M. Tarisien,
E. Atukpor,
V. Bagnoud,
C. Brabetz,
F. Consoli,
J. Domange,
F. Hannachi,
P. Nicolaï,
M. Salvadori,
B. Zielbauer
Abstract:
We recently proposed a new technique of plasma tailoring by laser-driven hydrodynamic shockwaves generated on both sides of a gas jet [J.-R. Marquès et al., Phys. Plasmas 28, 023103 (2021)]. In the continuation of this numerical work, we studied experimentally the influence of the tailoring on proton acceleration driven by a high-intensity picosecond-laser, in three cases: without tailoring, by ta…
▽ More
We recently proposed a new technique of plasma tailoring by laser-driven hydrodynamic shockwaves generated on both sides of a gas jet [J.-R. Marquès et al., Phys. Plasmas 28, 023103 (2021)]. In the continuation of this numerical work, we studied experimentally the influence of the tailoring on proton acceleration driven by a high-intensity picosecond-laser, in three cases: without tailoring, by tailoring only the entrance side of the ps-laser, or both sides of the gas jet. Without tailoring the acceleration is transverse to the laser axis, with a low-energy exponential spectrum, produced by Coulomb explosion. When the front side of the gas jet is tailored, a forward acceleration appears, that is significantly enhanced when both the front and back sides of the plasma are tailored. This forward acceleration produces higher energy protons, with a peaked spectrum, and is in good agreement with the mechanism of Collisionless Shock Acceleration (CSA). The spatio-temporal evolution of the plasma profile was characterized by optical shadowgraphy of a probe beam. The refraction and absorption of this beam was simulated by post-processing 3D hydrodynamic simulations of the plasma tailoring. Comparison with the experimental results allowed to estimate the thickness and near-critical density of the plasma slab produced by tailoring both sides of the gas jet. These parameters are in good agreement with those required for CSA.
△ Less
Submitted 28 September, 2023;
originally announced September 2023.
-
Time-Of-Flight methodologies with large-area diamond detectors for the effectively characterization of tens of MeV protons
Authors:
M. Salvadori,
P. L. Andreoli,
M. Cipriani,
G. Cristofari,
R. De Angelis,
S. Malko,
L. Volpe,
J. A. Perez Hernandez,
J. I. Alpinaniz,
A. Morace,
P. Antici,
M. Migliorati,
G. Di Giorgio,
F. Consoli
Abstract:
A novel detector based on a polycrystalline diamond sensor is here employed in an advanced Time-Of-Flight scheme for the characterization of energetic ions accelerated during laser-matter interactions. The optimization of the detector and of the advanced TOF methodology allow to obtain signals characterized by high signal-to-noise ratio and high dynamic range even in the most challenging experimen…
▽ More
A novel detector based on a polycrystalline diamond sensor is here employed in an advanced Time-Of-Flight scheme for the characterization of energetic ions accelerated during laser-matter interactions. The optimization of the detector and of the advanced TOF methodology allow to obtain signals characterized by high signal-to-noise ratio and high dynamic range even in the most challenging experimental environments, where the interaction of high-intensity laser pulses with matter leads to effective ion acceleration, but also to the generation of strong Electromagnetic Pulses (EMPs) with intensities up to the MV/m order. These are known to be a serious threat for the fielded diagnostic systems. In this paper we report on the measurement performed with the PW-class laser system Vega 3 at CLPU (30 J energy, 10^21 W/cm2 intensity, 30 fs pulses) irradiating solid targets, where both tens of MeV ions and intense EMP fields were generated. The data were analyzed to retrieve a calibrated proton spectrum and in particular we focus on the analysis of the most energetic portion (E > 5.8 MeV) of the spectrum showing a procedure to deal with the intrinsic lower sensitivity of the detector in the mentioned spectral-range.
△ Less
Submitted 20 December, 2021;
originally announced December 2021.
-
Time-Of-Flight methodologies with large-area diamond detectors for ion characterization in laser-driven experiments
Authors:
M. Salvadori,
G. Di Giorgio,
M. Cipriani,
C. Verona,
P. L. Andreoli,
G. Cristofari,
R. De Angelis,
M. Pillon,
N. E. Andreev,
P. Antici,
N. G. Borisenko,
D. Giulietti,
M. Migliorati,
O. Rosmej,
S. Zahter,
F. Consoli
Abstract:
Time-Of-Flight (TOF) technique coupled with semiconductor detectors is a powerful instrument to provide real-time characterization of ions accelerated because of laser-matter interactions. Nevertheless, the presence of strong electromagnetic pulses (EMPs) generated during the interactions, can severely hinder its employment. For this reason, the diagnostic system must be designed to have high EMP…
▽ More
Time-Of-Flight (TOF) technique coupled with semiconductor detectors is a powerful instrument to provide real-time characterization of ions accelerated because of laser-matter interactions. Nevertheless, the presence of strong electromagnetic pulses (EMPs) generated during the interactions, can severely hinder its employment. For this reason, the diagnostic system must be designed to have high EMP shielding. Here we present a new advanced prototype of detector, developed at ENEA-Centro Ricerche Frascati (Italy), with a large area (15 mm x 15 mm) polycrystalline diamond sensor having 150 microns thickness. The tailored detector design and testing ensure high sensitivity and, thanks to the fast temporal response, high energy resolution of the reconstructed ion spectrum. The detector was offline calibrated and then successfully tested during an experimental campaign carried out at the PHELIX laser facility at GSI (Germany). The high rejection to EMP fields was demonstrated and suitable calibrated spectra of the accelerated protons were obtained.
△ Less
Submitted 29 October, 2021;
originally announced October 2021.
-
Accurate spectra for high energy ions by advanced time-of-flight diamond-detector schemes in experiments with high energy and intensity lasers
Authors:
M. Salvadori,
F. Consoli,
C. Verona,
M. Cipriani,
M. P. Anania,
P. L. Andreoli,
P. Antici,
F. Bisesto,
G. Costa,
G. Cristofari,
R. De Angelis,
G. Di Giorgio,
M. Ferrario,
M. Galletti,
D. Giulietti,
M. Migliorati,
R. Pompili,
A. Zigler
Abstract:
Time-Of-Flight (TOF) methods are very effective to detect particles accelerated in laser-plasma interactions, but they shows significant limitations when used in experiments with high energy and intensity lasers, where both high-energy ions and remarkable levels of ElectroMagnetic Pulses (EMPs) in the radiofrequency-microwave range are generated. Here we describe a novel advanced diagnostic method…
▽ More
Time-Of-Flight (TOF) methods are very effective to detect particles accelerated in laser-plasma interactions, but they shows significant limitations when used in experiments with high energy and intensity lasers, where both high-energy ions and remarkable levels of ElectroMagnetic Pulses (EMPs) in the radiofrequency-microwave range are generated. Here we describe a novel advanced diagnostic method for the characterization of protons accelerated by intense matter interactions with high-energy and high-intensity ultra-short laser pulses up to the femtosecond and even future attosecond range. The method employs a stacked diamond detector structure and the TOF technique, featuring high sensitivity, high resolution, high radiation hardness and high signal-to-noise ratio in environments heavily affected by remarkable EMP fields. A detailed study on the use, the optimization and the properties of a single module of the stack is here also described for an experiment where a fast diamond detector is employed in an highly EMP-polluted environment. Accurate calibrated spectra of accelerated protons are presented from an experiment with the femtosecond Flame laser (beyond 100 TW power and ~$10^{19}$ W/cm$^2$ intensity) interacting with thin foil targets. The results that can be readily applied to the case of complex stack configurations and to more general experimental conditions.
△ Less
Submitted 3 March, 2020;
originally announced March 2020.
-
Long-term electrical conductivity of titanium-implanted alumina
Authors:
R. E. Spirin,
M. C. Salvadori,
L. G. Sgubin,
I. G. Brown
Abstract:
Metal ion implantation into ceramics has been demonstrated to be an effective and controllable technique for tailoring the surface electrical conductivity of the ceramic piece, and this approach has been used in a number of applications. Importantly, it provides a method for grading the voltage drop across high voltage insulators, and thereby increasing the maximum operational voltage that can be…
▽ More
Metal ion implantation into ceramics has been demonstrated to be an effective and controllable technique for tailoring the surface electrical conductivity of the ceramic piece, and this approach has been used in a number of applications. Importantly, it provides a method for grading the voltage drop across high voltage insulators, and thereby increasing the maximum operational voltage that can be applied across the insulator without surface flashover. However a concern for the use of the method is the long term stability of the implantation-induced conductivity, this especially so if the implanted metal species is readily oxidized. Here we report on our examination of the long-term behavior of the surface conductivity of titanium-implanted alumina. The results indicate that after an initial drop of as much as 40% in the first few weeks after implantation, the conductivity shows only a very slow decrease of about 10% over the following year. This degree of change should be quite sufficiently small to be unimportant for all but the most demanding situations.
△ Less
Submitted 11 October, 2019;
originally announced October 2019.
-
Dimensional effects on the tunneling conductivity of gold-implanted nanocomposite films
Authors:
C. Grimaldi,
M. Cattani,
M. C. Salvadori
Abstract:
We study the dependence of the electrical conductivity on the gold concentration of Au-implanted polymethylmethacrylate (PMMA) and alumina nanocomposite thin films. For Au contents larger than a critical concentration, the conductivity of Au-PMMA and Au-alumina is well described by percolation in two dimensions, indicating that the critical correlation length for percolation is larger than the thi…
▽ More
We study the dependence of the electrical conductivity on the gold concentration of Au-implanted polymethylmethacrylate (PMMA) and alumina nanocomposite thin films. For Au contents larger than a critical concentration, the conductivity of Au-PMMA and Au-alumina is well described by percolation in two dimensions, indicating that the critical correlation length for percolation is larger than the thickness of the films. Below the critical loading, the conductivity is dominated by tunneling processes between isolated Au particles dispersed in PMMA or alumina continuous matrices. Using an effective medium analysis of the tunneling conductivity, we show that Au-PMMA behaves as a tunneling system in two dimensions, as the film thickness is comparable to the mean Au particle size. On the contrary, the conductivity of Au-alumina films is best described by tunneling in three dimensions, although the film thickness is only a few times larger than the particle size. We interpret the enhancement of the effective dimensionality of Au-alumina films in the tunneling regime as due to the larger film thickness as compared to the mean interparticle distances.
△ Less
Submitted 6 April, 2015;
originally announced April 2015.
-
Comments on the Radial Distribution Functions and Structure Factors of Aggregates: Fractal and Non-Fractal Approaches
Authors:
M. Cattani,
M. C. Salvadori,
F. S. Teixeira
Abstract:
The definitions and applications of Radial Distribution Function (RDF) and Structure Factor (SF) to study properties of aggregate are found in many papers and books. The approach adopted to calculate the RDF and the SF to determine the interaction potential between particles of an aggregate is very different from that adopted to obtain their fractal properties. The difference between the two appro…
▽ More
The definitions and applications of Radial Distribution Function (RDF) and Structure Factor (SF) to study properties of aggregate are found in many papers and books. The approach adopted to calculate the RDF and the SF to determine the interaction potential between particles of an aggregate is very different from that adopted to obtain their fractal properties. The difference between the two approaches will be shown in details here. This article was written to graduate and postgraduate students of Physics
△ Less
Submitted 9 August, 2010;
originally announced August 2010.
-
SAXS Structural Characterization of Nanoheterogeneous Conducting Thin Films. A Brief Review of SAXS Theories
Authors:
M. Cattani,
M. C. Salvadori,
F. S. Teixeira
Abstract:
The SAXS (small angle X-ray scattering) technique has been used to determine the fundamental structure of conducting thin films fabricated by implanting gold ions into PMMA (polymethylmethacrylate) polymer. We present a brief review of the SAXS theories necessary to determine the structural properties of our nanoheterogeneous films.
The SAXS (small angle X-ray scattering) technique has been used to determine the fundamental structure of conducting thin films fabricated by implanting gold ions into PMMA (polymethylmethacrylate) polymer. We present a brief review of the SAXS theories necessary to determine the structural properties of our nanoheterogeneous films.
△ Less
Submitted 17 July, 2009;
originally announced July 2009.
-
Insulator-Conductor Transition: A Brief Theoretical Review
Authors:
M. Cattani,
M. C. Salvadori,
M. Cattani
Abstract:
The electrical conductivity of disordered insulator-conductor composites have been studied for more than thirty years. In spite of this some properties of dc bulk conductivity of composites still remain incompletely understood. We present a brief review of the most significant theories that have been proposed to study the critical insulator-conductor transition comparing their predictions with m…
▽ More
The electrical conductivity of disordered insulator-conductor composites have been studied for more than thirty years. In spite of this some properties of dc bulk conductivity of composites still remain incompletely understood. We present a brief review of the most significant theories that have been proposed to study the critical insulator-conductor transition comparing their predictions with many experimental results.
△ Less
Submitted 20 March, 2009;
originally announced March 2009.
