-
Hierarchical network design for nitrogen dioxide measurement in urban environments, part 1: proxy selection
Authors:
Lena Weissert,
Georgia Miskell,
Elaine Miles,
Kyle Alberti,
Brandon Feenstra,
Hamesh Patel,
Vasileios Papapostolou,
Andrea Polidori,
Geoff S Henshaw,
Jennifer A Salmond,
David E Williams
Abstract:
Previous studies have shown that a hierarchical network comprising a number of compliant reference stations and a much larger number of low-cost sensors can deliver reliable air quality data at high temporal and spatial resolution for ozone at neighbourhood scales. Key to this framework is the concept of a proxy: a reliable (regulatory) data source whose results have sufficient statistical similar…
▽ More
Previous studies have shown that a hierarchical network comprising a number of compliant reference stations and a much larger number of low-cost sensors can deliver reliable air quality data at high temporal and spatial resolution for ozone at neighbourhood scales. Key to this framework is the concept of a proxy: a reliable (regulatory) data source whose results have sufficient statistical similarity over some period of time to those from any given low-cost measurement site. This enables the low-cost instruments to be calibrated remotely, avoiding the need for costly on-site calibration of dense networks. This paper assesses the suitability of this method for local air pollutants such as nitrogen dioxide which show large temporal and spatial variability in concentration. The proxy technique is evaluated using the data from the network of regulatory air monitoring stations measuring nitrogen dioxide in Southern California to avoid errors introduced by low-cost instrument performance. Proxies chosen based on land use similarity signalled typically less than 0.1 percent false alarms. Although poor proxy performance was observed when the local geography was unusual (a semi-enclosed valley) in this instance the closest neighbour station proved to be an appropriate alternative. The method also struggled when wind speeds were low and very local sources presumably dominated the concentration patterns. Overall, we demonstrate that the technique can be applied to nitrogen dioxide, and that appropriate proxies can be found even within a spatially sparse network of stations in a region with large spatio-temporal variation in concentration.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
Hierarchical network design for nitrogen dioxide measurement in urban environments, part 2: network-based sensor calibration
Authors:
Lena Weissert,
Elaine Miles,
Georgia Miskell,
Kyle Alberti,
Brandon Feenstra,
Geoff S Henshaw,
Vasileios Papapostolou,
Hamesh Patel,
Andrea Polidori,
Jennifer A Salmond,
David E Williams
Abstract:
We present a management and data correction framework for low-cost electrochemical sensors for nitrogen dioxide (NO2) deployed within a hierarchical network of low-cost and regulatory-grade instruments. The framework is founded on the idea that it is possible in a suitably configured network to identify a source of reliable proxy data for each sensor site that has a similar probability distributio…
▽ More
We present a management and data correction framework for low-cost electrochemical sensors for nitrogen dioxide (NO2) deployed within a hierarchical network of low-cost and regulatory-grade instruments. The framework is founded on the idea that it is possible in a suitably configured network to identify a source of reliable proxy data for each sensor site that has a similar probability distribution of measurement values over a suitable time period. Previous work successfully applied these ideas to a sensor system with a simple linear 2-parameter (slope and offset) response. Applying these ideas to electrochemical sensors for NO2 presents significant additional difficulties for which we demonstrate solutions. The three NO2 sensor response parameters (offset, ozone (O3) response slope, and NO2 response slope) are known to vary significantly as a consequence of ambient humidity and temperature variations. Here we demonstrate that these response parameters can be estimated by minimising the Kullback-Leibler divergence between sensor-estimated and proxy NO2 distributions over a 3-day window. We then estimate an additional offset term by using co-location data. This offset term is dependent on climate and spatially correlated and can thus be projected across the network. Co-location data also estimates the time-, space- and concentration-dependent error distribution between sensors and regulatory-grade instruments. We show how the parameter variations can be used to indicate both sensor failure and failure of the proxy assumption. We apply the procedures to a network of 56 sensors distributed across the Inland Empire and Los Angeles County regions, demonstrating the need for reliable data from dense networks of monitors to supplement the existing regulatory networks.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
Low-cost sensor networks and land-use regression: interpolating nitrogen dioxide concentration at high temporal and spatial resolution in Southern California
Authors:
Lena Weissert,
Kyle Alberti,
Elaine Miles,
Georgia Miskell,
Brandon Feenstra,
Geoff S Henshaw,
Vasileios Papapostolou,
Hamesh Patel,
Andrea Polidori,
Jennifer A Salmond,
David E Williams
Abstract:
The development of low-cost sensors and novel calibration algorithms offer new opportunities to supplement existing regulatory networks to measure air pollutants at a high spatial resolution and at hourly and sub-hourly timescales. We use a random forest model on data from a network of low-cost sensors to describe the effect of land use features on local-scale air quality, extend this model to des…
▽ More
The development of low-cost sensors and novel calibration algorithms offer new opportunities to supplement existing regulatory networks to measure air pollutants at a high spatial resolution and at hourly and sub-hourly timescales. We use a random forest model on data from a network of low-cost sensors to describe the effect of land use features on local-scale air quality, extend this model to describe the hourly-scale variation of air quality at high spatial resolution, and show that deviations from the model can be used to identify particular conditions and locations where air quality differs from the expected land-use effect. The conditions and locations under which deviations were detected conform to expectations based on general experience.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
Scalable and modular material point method for large-scale simulations
Authors:
Krishna Kumar,
Jeffrey Salmond,
Shyamini Kularathna,
Christopher Wilkes,
Ezra Tjung,
Giovanna Biscontin,
Kenichi Soga
Abstract:
In this paper, we describe a new scalable and modular material point method (MPM) code developed for solving large-scale problems in continuum mechanics. The MPM is a hybrid Eulerian-Lagrangian approach, which uses both moving material points and computational nodes on a background mesh. The MPM has been successfully applied to solve large-deformation problems such as landslides, failure of slopes…
▽ More
In this paper, we describe a new scalable and modular material point method (MPM) code developed for solving large-scale problems in continuum mechanics. The MPM is a hybrid Eulerian-Lagrangian approach, which uses both moving material points and computational nodes on a background mesh. The MPM has been successfully applied to solve large-deformation problems such as landslides, failure of slopes, concrete flows, etc. Solving these large-deformation problems result in the material points actively moving through the mesh. Developing an efficient parallelisation scheme for the MPM code requires dynamic load-balancing techniques for both the material points and the background mesh. This paper describes the data structures and algorithms employed to improve the performance and portability of the MPM code. An object-oriented programming paradigm is adopted to modularise the MPM code. The Unified Modelling Language (UML) diagram of the MPM code structure is shown in Figure 1.
△ Less
Submitted 29 September, 2019;
originally announced September 2019.
-
Reliable data from low cost ozone sensors in a hierarchical network
Authors:
Georgia Miskell,
Kyle Alberti,
Brandon Feenstra,
Geoff S Henshaw,
Vasileios Papapostolou,
Hamesh Patel,
Andrea Polidori,
Jennifer A Salmond,
Lena Weissert,
David E Williams
Abstract:
We demonstrate how a hierarchical network comprising a number of compliant reference stations and a much larger number of low-cost sensors can deliver reliable high temporal-resolution ozone data at neighbourhood scales. The framework, demonstrated originally for a smaller scale regional network deployed in the Lower Fraser Valley, BC was tested and refined using two much more extensive networks o…
▽ More
We demonstrate how a hierarchical network comprising a number of compliant reference stations and a much larger number of low-cost sensors can deliver reliable high temporal-resolution ozone data at neighbourhood scales. The framework, demonstrated originally for a smaller scale regional network deployed in the Lower Fraser Valley, BC was tested and refined using two much more extensive networks of gas-sensitive semiconductor-based (GSS) sensors deployed at neighbourhood scales in Los Angeles: one of ~20 and one of ~45 GSS ozone sensors. Of these, ten sensors were co-located with different regulatory measurement stations, allowing a rigorous test of the accuracy of the algorithms used for off-site calibration and adjustment of low cost sensors. The method is based on adjusting the gain and offset of the low-cost sensor to match the first two moments of the probability distribution of the sensor result to that of a proxy: a calibrated independent measurement (usually derived from regulatory monitors) whose probability distribution evaluated over a time that emphasizes diurnal variations is similar to that at the test location. The regulatory measurement station physically closest to the low-cost sensor was a good proxy for most sites. The algorithms developed were successful in detecting and correcting sensor drift, and in identifying locations where geographical features resulted in significantly different patterns of ozone variation due to the relative dominance of different dispersion, emission and chemical processes. The entire network results show very large variations in ozone concentration that take place on short time- and distance scales across the Los-Angeles region. Such patterns were not captured by the more sparsely distributed stations of the existing regulatory network and demonstrate the need for reliable data from dense networks of monitors.
△ Less
Submitted 19 June, 2019;
originally announced June 2019.
-
Pushing the Limits of Exoplanet Discovery via Direct Imaging with Deep Learning
Authors:
Kai Hou Yip,
Nikolaos Nikolaou,
Piero Coronica,
Angelos Tsiaras,
Billy Edwards,
Quentin Changeat,
Mario Morvan,
Beth Biller,
Sasha Hinkley,
Jeffrey Salmond,
Matthew Archer,
Paul Sumption,
Elodie Choquet,
Remi Soummer,
Laurent Pueyo,
Ingo P. Waldmann
Abstract:
Further advances in exoplanet detection and characterisation require sampling a diverse population of extrasolar planets. One technique to detect these distant worlds is through the direct detection of their thermal emission. The so-called direct imaging technique, is suitable for observing young planets far from their star. These are very low signal-to-noise-ratio (SNR) measurements and limited g…
▽ More
Further advances in exoplanet detection and characterisation require sampling a diverse population of extrasolar planets. One technique to detect these distant worlds is through the direct detection of their thermal emission. The so-called direct imaging technique, is suitable for observing young planets far from their star. These are very low signal-to-noise-ratio (SNR) measurements and limited ground truth hinders the use of supervised learning approaches. In this paper, we combine deep generative and discriminative models to bypass the issues arising when directly training on real data. We use a Generative Adversarial Network to obtain a suitable dataset for training Convolutional Neural Network classifiers to detect and locate planets across a wide range of SNRs. Tested on artificial data, our detectors exhibit good predictive performance and robustness across SNRs. To demonstrate the limits of the detectors, we provide maps of the precision and recall of the model per pixel of the input image. On real data, the models can re-confirm bright source detections.
△ Less
Submitted 28 January, 2020; v1 submitted 12 April, 2019;
originally announced April 2019.
