-
Optomechanical cavities based on epitaxial GaP on nominally (001)-oriented Si
Authors:
Paula Mouriño,
Laura Mercadé,
Miguel Sinusía Lozano,
Raquel Resta,
Amadeu Griol,
Karim Ben Saddik,
Enrique Barrigón,
Sergio Fernández-Garrido,
Basilio Javier García,
Alejandro Martínez,
Víctor J. Gómez
Abstract:
Gallium phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of op…
▽ More
Gallium phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 $^o$C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5 %, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities show optical quality factors between 10$^3$ and 10$^4$, and localized mechanical resonances at frequencies around 3.1 GHz. Both optical and mechanical resonances are close to those previously reported on crystalline GaP structures. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers.
△ Less
Submitted 28 March, 2024;
originally announced March 2024.
-
Growth modes and coupled morphological-compositional modulations in GaP1-xNx layers grown on nominally (001)-oriented Si substrates
Authors:
K. Ben Saddik,
S. Fernandez-Garrido,
R. Volkov,
J. Grandal,
N. Borgardt,
B. J. Garcia
Abstract:
We investigated the chemical beam epitaxy of GaP1-xNx to correlate the growth parameters with their properties when they are grown on nominally (001)-oriented Si substrates, as desired for the lattice-matched integration of optoelectronic devices with the standard Si technology. The growth mode as well as the chemical, morphological and structural properties of samples prepared using different gro…
▽ More
We investigated the chemical beam epitaxy of GaP1-xNx to correlate the growth parameters with their properties when they are grown on nominally (001)-oriented Si substrates, as desired for the lattice-matched integration of optoelectronic devices with the standard Si technology. The growth mode as well as the chemical, morphological and structural properties of samples prepared using different growth temperatures and N precursor fluxes were analyzed by RHEED, XRD, RBS, NRA, EDX spectroscopy, AFM and TEM. Our results show that, up to x = 0.04, it is possible to synthesize smooth and chemically homogeneous GaP1-xNx layers with a high-structural quality in a 2D fashion, namely, layer-by-layer. For a given N mole fraction, the layer-by-layer growth mode is favored by lowering the growth temperature while decreasing the N precursor flux. As the flux of the N precursor is increased at a given temperature to enhance N incorporation, the quality of the layers degrades upon exceeding a temperature-dependent threshold; above this threshold, the growing layer experiences a growth mode transition from 2D to 3D after reaching a critical thickness of a few nm. Following that transition, the morphology and the chemical composition become modulated along the [110] direction with a period of several tens of nm. The surface morphology is then characterized by the formation of {113}-faceted wires, while the N concentration is enhanced at the troughs formed in between adjacent (113) and (-1-13) facets. We conclude on the feasibility of fabricating homogeneous thick GaP1-xNx layers lattice matched to Si (x = 0.021) or even with N content up to x=0.04. The possibility of exceeding a N mole fraction of 0.04 without inducing coupled morphological-compositional modulations has also been demonstrated when the layer thickness is kept below the critical value for the 2D-3D growth mode transition.
△ Less
Submitted 2 February, 2023;
originally announced February 2023.
-
A growth diagram for chemical beam epitaxy of GaP$_{1-x}$N$_{x}$ alloys on nominally $(001)$-oriented GaP-on-Si substrates
Authors:
Karim Ben Saddik,
Basilio Javier García,
Sergio Fernández-Garrido
Abstract:
The dilute-nitride ternary compound GaP$_{1-x}$N$_{x}$ is highly attractive to monolithically integrate pseudomorphic red light-emitting devices and photovoltaic cells with the standard Si technology because it is lattice matched to Si with a direct band gap of $\approx1.96$ eV for $x=0.021$. Here, we report on the chemical beam epitaxy of GaP$_{x}$N$_{1-x}$ alloys on nominally $(001)$-oriented Ga…
▽ More
The dilute-nitride ternary compound GaP$_{1-x}$N$_{x}$ is highly attractive to monolithically integrate pseudomorphic red light-emitting devices and photovoltaic cells with the standard Si technology because it is lattice matched to Si with a direct band gap of $\approx1.96$ eV for $x=0.021$. Here, we report on the chemical beam epitaxy of GaP$_{x}$N$_{1-x}$ alloys on nominally $(001)$-oriented GaP-on-Si substrates. The incorporation of N into GaP$_{1-x}$N$_{x}$ was systematically investigated as a function of the growth temperature and the fluxes of the N and P precursors, 1,1-dimethylhydrazine (DMHy) and tertiarybutylphosphine (TBP), respectively. We found that the N mole fraction exhibits an Arrhenius behavior characterized by an apparent activation energy of $(0.79\pm 0.05)$ eV. With respect to the fluxes, we determined that the N mole fraction is linearly proportional to the flux of DMHy, and inversely proportional to the one of TBP. All results are summarized in an universal equation that describes the dependence of \textit{x} on the growth temperature and the fluxes of the group-V precursors. The results are further illustrated in a growth diagram that visualizes the variation of the chemical composition as the growth temperature and the flux of DMHy are varied. This diagram also shows how to obtain single-phase and flat GaP$_{1-x}$N$_{x}$ layers, as certain growth conditions result in chemically phase-separated GaP$_{1-x}$N$_{x}$ layers with rough surface morphologies. Last, our results demonstrate the feasibility of chemical beam epitaxy for the synthesis of single-phase and flat GaP$_{x}$N$_{1-x}$ layers with N mole fractions up to about $x=0.04$, a value well above the one required for the lattice-matched integration of GaP$_{1-x}$N$_{x}$-based devices on Si.
△ Less
Submitted 4 November, 2021; v1 submitted 16 July, 2021;
originally announced July 2021.
-
H$_{2}$-diluted precursors for GaAs doping in chemical beam epitaxy
Authors:
K. Ben Saddik,
A. F. Braña,
N. López,
B. J. García,
S. Fernández-Garrido
Abstract:
A wide range of n- and p-type doping levels in GaAs layers grown by chemical beam epitaxy is achieved using H$_{2}$-diluted DTBSi and CBr$_{4}$ as gas precursors for Si and C. We show that the doping level can be varied by modifying either the concentration or the flux of the diluted precursor. Specifically, we demonstrate carrier concentrations of 6$\times$10$^{17}$-1.2$\times$10$^{19}$ cm…
▽ More
A wide range of n- and p-type doping levels in GaAs layers grown by chemical beam epitaxy is achieved using H$_{2}$-diluted DTBSi and CBr$_{4}$ as gas precursors for Si and C. We show that the doping level can be varied by modifying either the concentration or the flux of the diluted precursor. Specifically, we demonstrate carrier concentrations of 6$\times$10$^{17}$-1.2$\times$10$^{19}$ cm$^{-3}$ for Si, and 9$\times$10$^{16}$-3.7$\times$10$^{20}$ cm$^{-3}$ for C, as determined by Hall effect measurements. The incorporation of Si and C as a function of the flux of the corresponding diluted precursor is found to follow, respectively, a first and a fourth order power law. The dependence of the electron and hole mobility values on the carrier concentration as well as the analysis of the layers by low-temperature (12 K) photoluminescence spectroscopy indicate that the use of H$_{2}$ for diluting DTBSi or CBr$_{4}$ has no effect on the electrical and optical properties of GaAs.
△ Less
Submitted 25 February, 2021;
originally announced February 2021.
