-
Optical Switching in Tb/Co-Multilayer Based Nanoscale Magnetic Tunnel Junctions
Authors:
Sucheta Mondal,
Debanjan Polley,
Akshay Pattabi,
Jyotirmoy Chatterjee,
David Salomoni,
Luis Aviles-Felix,
Aurélien Olivier,
Miguel Rubio-Roy,
Bernard Diény,
Liliana Daniela Buda Prejbeanu,
Ricardo Sousa,
Ioan Lucian Prejbeanu,
Jeffrey Bokor
Abstract:
Magnetic tunnel junctions (MTJs) are elementary units of magnetic memory devices. For high-speed and low-power data storage and processing applications, fast reversal by an ultrashort laser pulse is extremely important. We demonstrate optical switching of Tb/Comultilayer-based nanoscale MTJs by combining optical writing and electrical read-out methods. A 90 fs-long laser pulse switches the magneti…
▽ More
Magnetic tunnel junctions (MTJs) are elementary units of magnetic memory devices. For high-speed and low-power data storage and processing applications, fast reversal by an ultrashort laser pulse is extremely important. We demonstrate optical switching of Tb/Comultilayer-based nanoscale MTJs by combining optical writing and electrical read-out methods. A 90 fs-long laser pulse switches the magnetization of the storage layer (SL). The change in magnetoresistance between the SL and a reference layer (RL) is probed electrically across the tunnel barrier. Single-shot switching is demonstrated by varying the cell diameter from 300 nm to 20 nm. The anisotropy, magnetostatic coupling, and switching probability exhibit cell-size dependence. By suitable association of laser fluence and magnetic field, successive commutation between high-resistance and low-resistance states is achieved. The switching dynamics in a continuous film is probed with the magneto-optical Kerr effect technique. Our experimental findings provide strong support for the growing interest in ultrafast spintronic devices.
△ Less
Submitted 18 December, 2022;
originally announced December 2022.
-
Penetration depth of Cooper pairs in the IrMn antiferromagnet
Authors:
R. L. Seeger,
G. Forestier,
O. Gladii,
M. Leiviskä,
S. Auffret,
I. Joumard,
C. Gomez,
M. Rubio-Roy,
A. I. Buzdin,
M. Houzet,
V. Baltz
Abstract:
Suppression of superconductivity due to the proximity effect between a superconductor and a ferromagnet can be partially alleviated when a Cooper pair simultaneously samples different directions of the short-range exchange field. The superconductor's critical temperature, TC, is therefore expected to partially recover when the ferromagnet is in a multi-domain state, as opposed to a single-domain s…
▽ More
Suppression of superconductivity due to the proximity effect between a superconductor and a ferromagnet can be partially alleviated when a Cooper pair simultaneously samples different directions of the short-range exchange field. The superconductor's critical temperature, TC, is therefore expected to partially recover when the ferromagnet is in a multi-domain state, as opposed to a single-domain state. Here, we discuss series of experiments performed with ferromagnet(Pt/Co)/spacer(IrMn and Pt)/superconductor(NbN) heterostructures. By tuning the various parameters in play, e.g., superconducting coherence length-to-thicknesses ratio, and domain sizes, we obtained up to 10 percent recovery of the superconducting critical temperature ΔTC/TC. This large-scale recovery made novel investigations possible. In particular, from the spacer thickness-dependence of ΔTC/TC, it was possible to deduce the characteristic length for Cooper pair penetration in an IrMn antiferromagnet. This information is crucial for electronic transport, and up to now has been difficult to access experimentally for antiferromagnets.
△ Less
Submitted 5 February, 2021;
originally announced February 2021.
-
Self-induced inverse spin Hall effect in ferromagnets: demonstration through non-monotonous temperature-dependence in permalloy
Authors:
O. Gladii,
L. Frangou,
A. Hallal,
R. L. Seeger,
P. Noel,
G. Forestier,
S. Auffret,
M. Rubio-Roy,
P. Warin,
L. Vila,
S. Wimmer,
H. Ebert,
S. Gambarelli,
M. Chshiev,
V. Baltz
Abstract:
We investigated the self-induced inverse spin Hall effect in ferromagnets. Temperature (T), thickness (t) and angular-dependent measurements of transverse voltage in spin pumping experiments were performed with permalloy films. Results revealed non-monotonous T-dependence of the self-induced transverse voltage. Qualitative agreement was found with first-principle calculations unravelling the skew…
▽ More
We investigated the self-induced inverse spin Hall effect in ferromagnets. Temperature (T), thickness (t) and angular-dependent measurements of transverse voltage in spin pumping experiments were performed with permalloy films. Results revealed non-monotonous T-dependence of the self-induced transverse voltage. Qualitative agreement was found with first-principle calculations unravelling the skew scattering, side-jump, and intrinsic contributions to the T-dependent spin Hall conductivity. Experimental data were similar whatever the material in contact with permalloy (oxides or metals), and revealed an increase of produced current with t, demonstrating a bulk origin of the effect.
△ Less
Submitted 3 September, 2019;
originally announced September 2019.
-
Beam test performance of the highly granular SiW-ECAL technological prototype for the ILC
Authors:
K. Kawagoe,
Y. Miura,
I. Sekiya,
T. Suehara,
T. Yoshioka,
S. Bilokin,
J. Bonis,
P. Cornebise,
A. Gallas,
A. Irles,
R. Pöschl,
F. Richard,
A. Thiebault,
D. Zerwas,
M. Anduze,
V. Balagura,
V. Boudry,
J-C. Brient,
E. Edy,
G. Fayolle,
M. Frotin,
F. Gastaldi,
R. Guillaumat,
A. Lobanov,
M. Louzir
, et al. (19 additional authors not shown)
Abstract:
The technological prototype of the CALICE highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) was tested in a beam at DESY in 2017. The setup comprised seven layers of silicon sensors. Each layer comprised four sensors, with each sensor containing an array of 256 $5.5\times5.5$ mm$^2$ silicon PIN diodes. The four sensors covered a total area of $18\times18$ cm$^2$, and comprise…
▽ More
The technological prototype of the CALICE highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) was tested in a beam at DESY in 2017. The setup comprised seven layers of silicon sensors. Each layer comprised four sensors, with each sensor containing an array of 256 $5.5\times5.5$ mm$^2$ silicon PIN diodes. The four sensors covered a total area of $18\times18$ cm$^2$, and comprised a total of 1024 channels. The readout was split into a trigger line and a charge signal line. Key performance results for signal over noise for the two output lines are presented, together with a study of the uniformity of the detector response. Measurements of the response to electrons for the tungsten loaded version of the detector are also presented.
△ Less
Submitted 22 October, 2019; v1 submitted 31 January, 2019;
originally announced February 2019.
-
Spin pumping as a generic probe for linear spin fluctuations: demonstration with ferromagnetic and antiferromagnetic orders, metallic and insulating electrical states
Authors:
O. Gladii,
L. Frangou,
G. Forestier,
R. L. Seeger,
S. Auffret,
M. Rubio-Roy,
R. Weil,
A. Mougin,
C. Gomez,
W. Jahjah,
J. -P. Jay,
D. Dekadjevi,
D. Spenato,
S. Gambarelli,
V. Baltz
Abstract:
We investigated spin injection by spin pumping from a spin-injector(NiFe) into a spin-sink to detect spin fluctuations in the spin-sink. By scanning the ordering-temperature of several magnetic transitions, we found that enhanced spin pumping due to spin fluctuations applies with several ordering states: ferromagnetic(Tb) and antiferromagnetic(NiO, NiFeOx, BiFeO3, exchange-biased and unbiased IrMn…
▽ More
We investigated spin injection by spin pumping from a spin-injector(NiFe) into a spin-sink to detect spin fluctuations in the spin-sink. By scanning the ordering-temperature of several magnetic transitions, we found that enhanced spin pumping due to spin fluctuations applies with several ordering states: ferromagnetic(Tb) and antiferromagnetic(NiO, NiFeOx, BiFeO3, exchange-biased and unbiased IrMn). Results also represent systematic experimental investigation supporting that the effect is independent of the metallic and insulating nature of the spin-sink, and is observed whether the spin current probe involves electronic or magnonic transport, facilitating advances in material characterization and engineering for spintronic applications.
△ Less
Submitted 11 January, 2019;
originally announced January 2019.
-
Commissioning of the highly granular SiW-ECAL technological prototype
Authors:
S. Bilokin,
J. Bonis,
P. Cornebise,
A. Gallas,
A. Irles,
R. Pöschl,
F. Richard,
A. Thiebault,
D. Zerwas,
M. Anduze,
V. Balagura,
V. Boudry,
J-C. Brient,
E. Edy,
G. Fayolle,
M. Frotin,
F. Gastaldi,
A. Lobanov,
F. Magniette,
J. Nanni,
M. Rubio-Roy,
K. Shpak,
H. Videau,
D. Yu,
S. Callier
, et al. (18 additional authors not shown)
Abstract:
In this article we describe the commissioning and a first analysis of the the beam test performance of a small prototype of a highly granular silicon tungsten calorimeter. The prototype features detector elements with a channel number similar to that envisaged for e.g. the ILD Detector of the International Linear Collider (ILC). The analysis demonstrates the capability of the detector to record si…
▽ More
In this article we describe the commissioning and a first analysis of the the beam test performance of a small prototype of a highly granular silicon tungsten calorimeter. The prototype features detector elements with a channel number similar to that envisaged for e.g. the ILD Detector of the International Linear Collider (ILC). The analysis demonstrates the capability of the detector to record signals as low as 0.5 MIP. Further, no loss of performance has been observed when operating the detector in a high magnetic field.
△ Less
Submitted 4 April, 2019; v1 submitted 11 October, 2018;
originally announced October 2018.
-
Unraveling the influence of electronic and magnonic spin current injection near the magnetic ordering transition of IrMn metallic antiferromagnets
Authors:
O. Gladii,
L. Frangou,
G. Forestier,
R. L. Seeger,
S. Auffret,
I. Joumard,
M. Rubio-Roy,
S. Gambarelli,
V. Baltz
Abstract:
Although spin injection at room temperature in an IrMn metallic antiferromagnet strongly depends on the transport regime, and is more efficient in the case of magnonic transport, in this article, we present experimental data demonstrating that the enhanced efficiency of spin injection caused by spin fluctuations near the ordering temperature can be as efficient for the electronic and magnonic tran…
▽ More
Although spin injection at room temperature in an IrMn metallic antiferromagnet strongly depends on the transport regime, and is more efficient in the case of magnonic transport, in this article, we present experimental data demonstrating that the enhanced efficiency of spin injection caused by spin fluctuations near the ordering temperature can be as efficient for the electronic and magnonic transport regimes. By selecting representative interacting environments, we also demonstrated that the amplification of spin injection near the ordering temperature of the IrMn antiferromagnet is independent of exchange coupling with an adjacent NiFe ferromagnet. In addition, our findings confirm that the spin current carried by magnons penetrates deeper than that transported by conduction electrons in IrMn. Finally, our data indicates that the value of the ordering temperature for the IrMn antiferromagnet is not significantly affected by either the electronic or magnonic nature of the spin current probe, or by exchange coupling.
△ Less
Submitted 17 September, 2018;
originally announced September 2018.
-
Hadronic Energy Resolution of a Combined High Granularity Scintillator Calorimeter System
Authors:
CALICE Collaboration,
J. Repond,
L. Xia,
J. Apostolakis,
G. Folger,
V. Ivantchenko,
A. Ribon,
V. Uzhinskiy,
D. Boumediene,
V. Francais,
G. C. Blazey,
A. Dyshkant,
K. Francis,
V. Zutshi,
O. Bach,
E. Brianne,
A. Ebrahimi,
K. Gadow,
P. Gttlicher,
O. Hartbrich F. Krivan,
K. Krüger,
J. Kvasnicka,
S. Lu,
C. Neubüser,
A. Provenza
, et al. (84 additional authors not shown)
Abstract:
This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity scintillator-SiPM calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the energy response, resolution, and longitudinal shower profiles.…
▽ More
This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity scintillator-SiPM calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the energy response, resolution, and longitudinal shower profiles. The results of a software compensation technique based on weighting according to hit energy are compared to those of a standard linear energy reconstruction. The results are compared to predictions of the GEANT4 physics lists QGSP_BERT_HP and FTFP_BERT_HP.
△ Less
Submitted 12 September, 2018; v1 submitted 11 September, 2018;
originally announced September 2018.
-
SiW ECAL for future $e^+e^-$ collider
Authors:
V. Balagura,
S. Bilokin,
J. Bonis,
V. Boudry,
J. -C. Brient,
S. Callier,
T. Cheng,
R. Cornat,
C. De La Taille,
T. H. Doan,
M. Frotin,
F. Gastaldi,
H. Hirai,
S. Jain,
Sh. Jain,
D. Lacour,
L. Lavergne,
A. Lleres,
F. Magniette,
L. Mastrolorenzo,
J. Nanni,
R. Poeschl,
A. Pozdnyakov,
A. Psallidas,
M. Ruan
, et al. (7 additional authors not shown)
Abstract:
Calorimeters with silicon detectors have many unique features and are proposed for several world-leading experiments. We discuss the tests of the first three 18x18 cm$^2$ layers segmented into 1024 pixels of the technological prototype of the silicon-tungsten electromagnetic calorimeter for a future $e^+e^-$ collider. The tests have beem performed in November 2015 at CERN SPS beam line.
Calorimeters with silicon detectors have many unique features and are proposed for several world-leading experiments. We discuss the tests of the first three 18x18 cm$^2$ layers segmented into 1024 pixels of the technological prototype of the silicon-tungsten electromagnetic calorimeter for a future $e^+e^-$ collider. The tests have beem performed in November 2015 at CERN SPS beam line.
△ Less
Submitted 20 June, 2017; v1 submitted 30 May, 2017;
originally announced May 2017.
-
Resistive Plate Chamber Digitization in a Hadronic Shower Environment
Authors:
Z. Deng,
Y. Li,
Y. Wang,
Q. Yue,
Z. Yang,
J. Apostolakis,
G. Folger,
C. Grefe,
V. Ivantchenko,
A. Ribon,
V. Uzhinskiy,
D. Boumediene,
C. Carloganu,
V. Français,
G. Cho,
D-W. Kim,
S. C. Lee,
W. Park,
S. Vallecorsa,
S. Cauwenbergh,
M. Tytgat,
A. Pingault,
N. Zaganidis,
E. Brianne,
A. Ebrahimi
, et al. (103 additional authors not shown)
Abstract:
The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, e…
▽ More
The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, electrons and pions of different energies at the CERN Super Proton Synchrotron. To be able to study the performance of such a calorimeter in future experiments it is important to ensure reliable simulation of its response. In this paper we present our prototype simulation performed with GEANT4 and the digitization procedure achieved with an algorithm called SimDigital. A detailed description of this algorithm is given and the methods to determinate its parameters using muon tracks and electromagnetic showers are explained. The comparison with hadronic shower data shows a good agreement up to 50 GeV. Discrepancies are observed at higher energies. The reasons for these differences are investigated.
△ Less
Submitted 15 April, 2016;
originally announced April 2016.
-
Hadron shower decomposition in the highly granular CALICE analogue hadron calorimeter
Authors:
The CALICE Collaboration,
G. Eigen,
T. Price,
N. K. Watson,
J. S. Marshall,
M. A. Thomson,
D. R. Ward,
D. Benchekroun,
A. Hoummada,
Y. Khoulaki,
J. Apostolakis,
A. Dotti,
G. Folger,
V. Ivantchenko,
A. Ribon,
V. Uzhinskiy,
J. -Y. Hostachy,
L. Morin,
E. Brianne,
A. Ebrahimi,
K. Gadow,
P. Göttlicher,
C. Günter,
O. Hartbrich,
B. Hermberg
, et al. (135 additional authors not shown)
Abstract:
The spatial development of hadronic showers in the CALICE scintillator-steel analogue hadron calorimeter is studied using test beam data collected at CERN and FNAL for single positive pions and protons with initial momenta in the range from 10 to 80 GeV/c. Both longitudinal and radial development of hadron showers are parametrised with two-component functions. The parametrisation is fit to test be…
▽ More
The spatial development of hadronic showers in the CALICE scintillator-steel analogue hadron calorimeter is studied using test beam data collected at CERN and FNAL for single positive pions and protons with initial momenta in the range from 10 to 80 GeV/c. Both longitudinal and radial development of hadron showers are parametrised with two-component functions. The parametrisation is fit to test beam data and simulations using the QGSP_BERT and FTFP_BERT physics lists from Geant4 version 9.6. The parameters extracted from data and simulated samples are compared for the two types of hadrons. The response to pions and the ratio of the non-electromagnetic to the electromagnetic calorimeter response, h/e, are estimated using the extrapolation and decomposition of the longitudinal profiles.
△ Less
Submitted 15 March, 2016; v1 submitted 27 February, 2016;
originally announced February 2016.
-
Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter
Authors:
The CALICE collaboration,
M. Chefdeville,
Y. Karyotakis,
J. Repond,
J. Schlereth,
L. Xia,
G. Eigen,
J. S. Marshall,
M. A. Thomson,
D. R. Ward,
N. Alipour Tehrani,
J. Apostolakis,
D. Dannheim,
K. Elsener,
G. Folger,
C. Grefe,
V. Ivantchenko,
M. Killenberg,
W. Klempt,
E. van der Kraaij,
L. Linssen,
A. -I. Lucaci-Timoce,
A. Münnich,
S. Poss,
A. Ribon
, et al. (158 additional authors not shown)
Abstract:
We present a study of showers initiated by electrons, pions, kaons, and protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE scintillator-tungsten analogue hadronic calorimeter. The data were recorded at the CERN Super Proton Synchrotron in 2011. The analysis includes measurements of the calorimeter response to each particle type as well as measurements of the energy resolutio…
▽ More
We present a study of showers initiated by electrons, pions, kaons, and protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE scintillator-tungsten analogue hadronic calorimeter. The data were recorded at the CERN Super Proton Synchrotron in 2011. The analysis includes measurements of the calorimeter response to each particle type as well as measurements of the energy resolution and studies of the longitudinal and radial shower development for selected particles. The results are compared to Geant4 simulations (version 9.6.p02). In the study of the energy resolution we include previously published data with beam momenta from 1 GeV to 10 GeV recorded at the CERN Proton Synchrotron in 2010.
△ Less
Submitted 11 December, 2015; v1 submitted 2 September, 2015;
originally announced September 2015.
-
Reversible optical doping of graphene
Authors:
Antoine Tiberj,
Miguel Rubio-Roy,
Matthieu Paillet,
Jean-Roch Huntzinger,
Périne Landois,
Mirko Mikolasek,
Sylvie Contreras,
Jean-Louis Sauvajol,
Erik Dujardin,
Ahmed-Azmi Zahab
Abstract:
The ultimate surface exposure provided by graphene monolayer makes it the ideal sensor platform but also exposes its intrinsic properties to any environmental perturbations. In this work, we demonstrate that the charge carrier density of graphene exfoliated on a SiO$_2$/Si substrate can be finely and reversibly tuned between electron and hole doping with visible photons. This photo-induced doping…
▽ More
The ultimate surface exposure provided by graphene monolayer makes it the ideal sensor platform but also exposes its intrinsic properties to any environmental perturbations. In this work, we demonstrate that the charge carrier density of graphene exfoliated on a SiO$_2$/Si substrate can be finely and reversibly tuned between electron and hole doping with visible photons. This photo-induced doping happens under moderate laser power conditions but is significantly affected by the substrate cleaning method. In particular, it is found to require hydrophilic substrates and to vanish in suspended graphene. These findings suggest that optically gated graphene devices operating with a sub-second time scale can be envisioned but also that Raman spectroscopy is not always as non-invasive as generally assumed.
△ Less
Submitted 16 April, 2013;
originally announced April 2013.
-
Directed self-organization of graphene nanoribbons on SiC
Authors:
M. Sprinkle,
M. Ruan,
X. Wu,
Y. Hu,
M. Rubio-Roy,
J. Hankinson,
N. K. Madiomanana,
C. Berger,
W. A. de Heer
Abstract:
Realization of post-CMOS graphene electronics requires production of semiconducting graphene, which has been a labor-intensive process. We present tailoring of silicon carbide crystals via conventional photolithography and microelectronics processing to enable templated graphene growth on 4H-SiC{1-10n} (n = 8) crystal facets rather than the customary {0001} planes. This allows self-organized gro…
▽ More
Realization of post-CMOS graphene electronics requires production of semiconducting graphene, which has been a labor-intensive process. We present tailoring of silicon carbide crystals via conventional photolithography and microelectronics processing to enable templated graphene growth on 4H-SiC{1-10n} (n = 8) crystal facets rather than the customary {0001} planes. This allows self-organized growth of graphene nanoribbons with dimensions defined by those of the facet. Preferential growth is confirmed by Raman spectroscopy and high-resolution transmission electron microscopy (HRTEM) measurements, and electrical characterization of prototypic graphene devices is presented. Fabrication of > 10,000 top-gated graphene transistors on a 0.24 cm2 SiC chip demonstrates scalability of this process and represents the highest density of graphene devices reported to date.
△ Less
Submitted 3 February, 2010;
originally announced February 2010.
