Showing 1–35 of 35 results for author: Rottenberg, F

OWP-IMU: An RSS-based Optical Wireless and IMU Indoor Positioning Dataset

Authors: Fan Wu, Jorik De Bruycker, Daan Delabie, Nobby Stevens, Francois Rottenberg, Lieven De Strycker

Abstract: Received signal strength (RSS)-based optical wireless positioning (OWP) systems are becoming popular for indoor localization because they are low-cost and accurate. However, few open-source datasets are available to test and analyze RSS-based OWP systems. In this paper, we collected RSS values at a sampling frequency of 27 Hz, inertial measurement unit (IMU) at a sampling frequency of 200 Hz and t… ▽ More Received signal strength (RSS)-based optical wireless positioning (OWP) systems are becoming popular for indoor localization because they are low-cost and accurate. However, few open-source datasets are available to test and analyze RSS-based OWP systems. In this paper, we collected RSS values at a sampling frequency of 27 Hz, inertial measurement unit (IMU) at a sampling frequency of 200 Hz and the ground truth at a sampling frequency of 160 Hz in two indoor environments. One environment has no obstacles, and the other has a metal column as an obstacle to represent a non-line-of-sight (NLOS) scenario. We recorded data with a vehicle at three different speeds (low, medium and high). The dataset includes over 110 k data points and covers more than 80 min. We also provide benchmark tests to show localization performance using only RSS-based OWP and improve accuracy by combining IMU data via extended kalman filter. The dataset OWP-IMU is open source1 to support further research on indoor localization methods. △ Less

Submitted 22 May, 2025; originally announced May 2025.

On Optimizing Time-, Space- and Power-Domain Energy-Saving Techniques for Sub-6 GHz Base Stations

Authors: Emanuele Peschiera, Youssef Agram, François Quitin, Liesbet Van der Perre, François Rottenberg

Abstract: What is the optimal base station (BS) resource allocation strategy given a measurement-based power consumption model and a fixed target user rate? Rush-to-sleep in time, rush-to-mute in space, awake-but-whisper in power, or a combination of them? We propose in this paper an efficient solution to the problem of finding the optimal number of active time slots, active antennas, and transmit power at… ▽ More What is the optimal base station (BS) resource allocation strategy given a measurement-based power consumption model and a fixed target user rate? Rush-to-sleep in time, rush-to-mute in space, awake-but-whisper in power, or a combination of them? We propose in this paper an efficient solution to the problem of finding the optimal number of active time slots, active antennas, and transmit power at active antennas in a multiple-input multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM) system under per-user rate and per-antenna transmit power constraints. The use of a parametric power consumption model validated on operator measurements of 4G and 5G BSs enhances the interpretation of the results. We discuss the optimal energy-saving strategy at different network loads for three BS configurations. Using as few BS antennas as possible is close to optimal in BSs not implementing time-domain power savings such as micro-discontinuous transmission (μDTX). Energy-saving schemes that jointly operate in the three domains are instead optimal when the BS hardware can enter time-domain power-saving modes, with a tendency for rush-to-mute in massive MIMO and for rush-to-sleep in BS with fewer antennas. Median energy savings up to $30\%$ are achieved at low network loads. △ Less

Submitted 21 May, 2025; originally announced May 2025.

Comments: This work has been submitted to IEEE for possible publication

GNN-based Precoder Design and Fine-tuning for Cell-free Massive MIMO with Real-world CSI

Authors: Tianzheng Miao, Thomas Feys, Gilles Callebaut, Jarne Van Mulders, Emanuele Peschiera, Md Arifur Rahman, François Rottenberg

Abstract: Cell-free massive MIMO (CF-mMIMO) has emerged as a promising paradigm for delivering uniformly high-quality coverage in future wireless networks. To address the inherent challenges of precoding in such distributed systems, recent studies have explored the use of graph neural network (GNN)-based methods, using their powerful representation capabilities. However, these approaches have predominantly… ▽ More Cell-free massive MIMO (CF-mMIMO) has emerged as a promising paradigm for delivering uniformly high-quality coverage in future wireless networks. To address the inherent challenges of precoding in such distributed systems, recent studies have explored the use of graph neural network (GNN)-based methods, using their powerful representation capabilities. However, these approaches have predominantly been trained and validated on synthetic datasets, leaving their generalizability to real-world propagation environments largely unverified. In this work, we initially pre-train the GNN using simulated channel state information (CSI) data, which incorporates standard propagation models and small-scale Rayleigh fading. Subsequently, we finetune the model on real-world CSI measurements collected from a physical testbed equipped with distributed access points (APs). To balance the retention of pre-trained features with adaptation to real-world conditions, we adopt a layer-freezing strategy during fine-tuning, wherein several GNN layers are frozen and only the later layers remain trainable. Numerical results demonstrate that the fine-tuned GNN significantly outperforms the pre-trained model, achieving an approximate 8.2 bits per channel use gain at 20 dB signal-to-noise ratio (SNR), corresponding to a 15.7 % improvement. These findings highlight the critical role of transfer learning and underscore the potential of GNN-based precoding techniques to effectively generalize from synthetic to real-world wireless environments. △ Less

Submitted 13 May, 2025; originally announced May 2025.

Comments: 6 pages, 7 figures, conference

MSC Class: 94A15 (Primary); 68T05 (Secondary)

How to Perform Distributed Precoding to Wirelessly Power Shelf Labels: Signal Processing and Measurements

Authors: Gilles Callebaut, Jarne Van Mulders, Bert Cox, Liesbet Van der Perre, Lieven De Strycker, François Rottenberg

Abstract: Wireless power transfer (WPT) has garnered increasing attention due to its potential to eliminate device-side batteries. With the advent of (distributed) multiple-input multiple-output (MIMO), radio frequency (RF) WPT has become feasible over extended distances. This study focuses on optimizing the energy delivery to Energy Receivers (ERs) while minimizing system total transmit power. Rather than… ▽ More Wireless power transfer (WPT) has garnered increasing attention due to its potential to eliminate device-side batteries. With the advent of (distributed) multiple-input multiple-output (MIMO), radio frequency (RF) WPT has become feasible over extended distances. This study focuses on optimizing the energy delivery to Energy Receivers (ERs) while minimizing system total transmit power. Rather than continuous power delivery, we optimize the precoding weights within specified time slots to meet the energy requirements of the ERs. Both unsynchronized (non-coherent) and synchronized (coherent) systems are evaluated. Our analysis indicates that augmenting the number of antennas and transitioning from an unsynchronized to asynchronized full phase-coherent system substantially enhances system performance. This optimization ensures precise energy delivery, reducing overshoots and overall energy consumption. Experimental validation was conducted using a testbed with84 antennas, validating the trends observed in our numerical simulations. △ Less

Submitted 20 August, 2024; originally announced August 2024.

Comments: 2024 IEEE 25th International Workshop on Signal Processing Advances in Wireless Communications (SPAWC)

Enhancing RSS-Based Visible Light Positioning by Optimal Calibrating the LED Tilt and Gain

Authors: Fan Wu, Nobby Stevens, Lieven De Strycker, François Rottenberg

Abstract: This paper presents an optimal calibration scheme and a weighted least squares (LS) localization algorithm for received signal strength (RSS) based visible light positioning (VLP) systems, focusing on the often overlooked impact of light emitting diode (LED) tilt. By optimally calibrating LED tilt and gain, we significantly enhance VLP localization accuracy. Our algorithm outperforms both machine… ▽ More This paper presents an optimal calibration scheme and a weighted least squares (LS) localization algorithm for received signal strength (RSS) based visible light positioning (VLP) systems, focusing on the often overlooked impact of light emitting diode (LED) tilt. By optimally calibrating LED tilt and gain, we significantly enhance VLP localization accuracy. Our algorithm outperforms both machine learning Gaussian processes (GPs) and traditional multilateration techniques. Against GPs, it achieves improvements of 58% and 74% in the 50th and 99th percentiles, respectively. When compared to multilateration, it reduces the 50th percentile error from 7.4 cm to 3.2 cm and the 99th percentile error from 25.7 cm to 11 cm. We introduce a low-complexity estimator for tilt and gain that meets the Cramer-Rao lower bound (CRLB) for the mean squared error (MSE), emphasizing its precision and efficiency. Further, we elaborate on optimal calibration measurement placement and refine the observation model to include residual calibration errors, thereby improving localization performance. The weighted LS algorithm's effectiveness is validated through simulations and real-world data, consistently outperforming GPs and multilateration, across various training set sizes and reducing outlier errors. Our findings underscore the critical role of LED tilt calibration in advancing VLP system accuracy and contribute to a more precise model for indoor positioning technologies. △ Less

Submitted 18 November, 2024; v1 submitted 29 April, 2024; originally announced April 2024.

Comments: Refine the paper according to the reviewer suggestions

Optimal Training Design for Over-the-Air Polynomial Power Amplifier Model Estimation

Authors: François Rottenberg, Thomas Feys, Nuutti Tervo

Abstract: The current evolution towards a massive number of antennas and a large variety of transceiver architectures forces to revisit the conventional techniques used to improve the fundamental power amplifier (PA) linearity-efficiency trade-off. Most of the digital linearization techniques rely on PA measurements using a dedicated feedback receiver. However, in modern systems with large amount of RF chai… ▽ More The current evolution towards a massive number of antennas and a large variety of transceiver architectures forces to revisit the conventional techniques used to improve the fundamental power amplifier (PA) linearity-efficiency trade-off. Most of the digital linearization techniques rely on PA measurements using a dedicated feedback receiver. However, in modern systems with large amount of RF chains and high carrier frequency, dedicated receiver per RF chain is costly and complex to implement. This issue can be addressed by measuring PAs over the air, but in that case, this extra signalling is sharing resources with the actual data transmission. In this paper, we look at the problem from an estimation theory point of view so as to minimize pilot overhead while optimizing estimation performance. We show that conventional results in the mathematical statistics community can be used. We find the least squares (LS) optimal training design, minimizing the maximal mean squared error (MSE) of the reconstructed PA response over its whole input range. As compared to uniform training, simulations demonstrate a factor 10 reduction of the maximal MSE for a L = 7 PA polynomial order. Using prior information, the LMMSE estimator can achieve an additional gain of a factor up to 300 at low signal-to-noise ratio (SNR). △ Less

Submitted 19 April, 2024; originally announced April 2024.

Toward Energy-Efficient Massive MIMO: Graph Neural Network Precoding for Mitigating Non-Linear PA Distortion

Authors: Thomas Feys, Liesbet Van der Perre, François Rottenberg

Abstract: Massive MIMO systems are typically designed assuming linear power amplifiers (PAs). However, PAs are most energy efficient close to saturation, where non-linear distortion arises. For conventional precoders, this distortion can coherently combine at user locations, limiting performance. We propose a graph neural network (GNN) to learn a mapping between channel and precoding matrices, which maximiz… ▽ More Massive MIMO systems are typically designed assuming linear power amplifiers (PAs). However, PAs are most energy efficient close to saturation, where non-linear distortion arises. For conventional precoders, this distortion can coherently combine at user locations, limiting performance. We propose a graph neural network (GNN) to learn a mapping between channel and precoding matrices, which maximizes the sum rate affected by non-linear distortion, using a high-order polynomial PA model. In the distortion-limited regime, this GNN-based precoder outperforms zero forcing (ZF), ZF plus digital pre-distortion (DPD) and the distortion-aware beamforming (DAB) precoder from the state-of-the-art. At an input back-off of -3 dB the proposed precoder compared to ZF increases the sum rate by 8.60 and 8.84 bits/channel use for two and four users respectively. Radiation patterns show that these gains are achieved by transmitting the non-linear distortion in non-user directions. In the four user-case, for a fixed sum rate, the total consumed power (PA and processing) of the GNN precoder is 3.24 and 1.44 times lower compared to ZF and ZF plus DPD respectively. A complexity analysis shows six orders of magnitude reduction compared to DAB precoding. This opens perspectives to operate PAs closer to saturation, which drastically increases their energy efficiency. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Energy-Saving Cell-Free Massive MIMO Precoders with a Per-AP Wideband Kronecker Channel Model

Authors: Emanuele Peschiera, Xavier Mestre, François Rottenberg

Abstract: We study cell-free massive multiple-input multiple-output precoders that minimize the power consumed by the power amplifiers subject to per-user per-subcarrier rate constraints. The power at each antenna is generally retrieved by solving a fixed-point equation that depends on the instantaneous channel coefficients. Using random matrix theory, we retrieve each antenna power as the solution to a fix… ▽ More We study cell-free massive multiple-input multiple-output precoders that minimize the power consumed by the power amplifiers subject to per-user per-subcarrier rate constraints. The power at each antenna is generally retrieved by solving a fixed-point equation that depends on the instantaneous channel coefficients. Using random matrix theory, we retrieve each antenna power as the solution to a fixed-point equation that depends only on the second-order statistics of the channel. Numerical simulations prove the accuracy of our asymptotic approximation and show how a subset of access points should be turned off to save power consumption, while all the antennas of the active access points are utilized with uniform power across them. This mechanism allows to save consumed power up to a factor of 9$\times$ in low-load scenarios. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Deep Unfolding for Fast Linear Massive MIMO Precoders under a PA Consumption Model

Authors: Thomas Feys, Xavier Mestre, Emanuele Peschiera, François Rottenberg

Abstract: Massive multiple-input multiple-output (MIMO) precoders are typically designed by minimizing the transmit power subject to a quality-of-service (QoS) constraint. However, current sustainability goals incentivize more energy-efficient solutions and thus it is of paramount importance to minimize the consumed power directly. Minimizing the consumed power of the power amplifier (PA), one of the most c… ▽ More Massive multiple-input multiple-output (MIMO) precoders are typically designed by minimizing the transmit power subject to a quality-of-service (QoS) constraint. However, current sustainability goals incentivize more energy-efficient solutions and thus it is of paramount importance to minimize the consumed power directly. Minimizing the consumed power of the power amplifier (PA), one of the most consuming components, gives rise to a convex, non-differentiable optimization problem, which has been solved in the past using conventional convex solvers. Additionally, this problem can be solved using a proximal gradient descent (PGD) algorithm, which suffers from slow convergence. In this work, to overcome the slow convergence, a deep unfolded version of the algorithm is proposed, which can achieve close-to-optimal solutions in only 20 iterations compared to the 3500 plus iterations needed by the PGD algorithm. Results indicate that the deep unfolding algorithm is three orders of magnitude faster than a conventional convex solver and four orders of magnitude faster than the PGD. △ Less

Submitted 25 April, 2023; originally announced April 2023.

Comments: This paper is presented at VTC2023-Spring. T. Feys, X. Mestre, E. Peschiera, and F. Rottenberg, "Deep Unfolding for Fast Linear Massive MIMO Precoders under a PA Consumption Model," in 2023 IEEE 97th Vehicular Technology Conference (VTC2023-Spring), Florence, Italy, June 2023

Energy-Saving Precoder Design for Narrowband and Wideband Massive MIMO

Authors: Emanuele Peschiera, François Rottenberg

Abstract: In this work, we study massive multiple-input multiple-output (MIMO) precoders optimizing power consumption while achieving the users' rate requirements. We first characterize analytically the solutions for narrowband and wideband systems minimizing the power amplifiers (PAs) consumption in low system load, where the per-antenna power constraints are not binding. After, we focus on the asymptotic… ▽ More In this work, we study massive multiple-input multiple-output (MIMO) precoders optimizing power consumption while achieving the users' rate requirements. We first characterize analytically the solutions for narrowband and wideband systems minimizing the power amplifiers (PAs) consumption in low system load, where the per-antenna power constraints are not binding. After, we focus on the asymptotic wideband regime. The power consumed by the whole base station (BS) and the high-load scenario are then also investigated. We obtain simple solutions, and the optimal strategy in the asymptotic case reduces to finding the optimal number of active antennas, relying on known precoders among the active antennas. Numerical results show that large savings in power consumption are achievable in the narrowband system by employing antenna selection, while all antennas need to be activated in the wideband system when considering only the PAs consumption, and this implies lower savings. When considering the overall BS power consumption and a large number of subcarriers, we show that significant savings are achievable in the low-load regime by using a subset of the BS antennas. While optimization based on transmit power pushes to activate all antennas, optimization based on consumed power activates a number of antennas proportional to the load. △ Less

Submitted 9 July, 2023; v1 submitted 4 April, 2023; originally announced April 2023.

Comments: To appear in IEEE Transactions on Green Communications and Networking

Information-Theoretic Study of Time-Domain Energy-Saving Techniques in Radio Access

Authors: François Rottenberg

Abstract: Reduction of wireless network energy consumption is becoming increasingly important to reduce environmental footprint and operational costs. A key concept to achieve it is the use of lean transmission techniques that dynamically (de)activate hardware resources as a function of the load. In this paper, we propose a pioneering information-theoretic study of time-domain energy-saving techniques, rely… ▽ More Reduction of wireless network energy consumption is becoming increasingly important to reduce environmental footprint and operational costs. A key concept to achieve it is the use of lean transmission techniques that dynamically (de)activate hardware resources as a function of the load. In this paper, we propose a pioneering information-theoretic study of time-domain energy-saving techniques, relying on a practical hardware power consumption model of sleep and active modes. By minimizing the power consumption under a quality of service constraint (rate, latency), we propose simple yet powerful techniques to allocate power and choose which resources to activate or to put in sleep mode. Power consumption scaling regimes are identified. We show that a ``rush-to-sleep" approach (maximal power in fewest symbols followed by sleep) is only optimal in a high noise regime. It is shown how consumption can be made linear with the load and achieve massive energy reduction (factor of 10) at low-to-medium load. The trade-off between energy efficiency (EE) and spectral efficiency (SE) is also characterized, followed by a multi-user study based on time division multiple access (TDMA). △ Less

Submitted 4 September, 2023; v1 submitted 31 March, 2023; originally announced March 2023.

Grant-Free Random Access of IoT devices in Massive MIMO with Partial CSI

Authors: Gilles Callebaut, François Rottenberg, Liesbet Van der Perre, Erik G. Larsson

Abstract: The number of wireless devices is drastically increasing, resulting in many devices contending for radio resources. In this work, we present an algorithm to detect active devices for unsourced random access, i.e., the devices are uncoordinated. The devices use a unique, but non-orthogonal preamble, known to the network, prior to sending the payload data. They do not employ any carrier sensing tech… ▽ More The number of wireless devices is drastically increasing, resulting in many devices contending for radio resources. In this work, we present an algorithm to detect active devices for unsourced random access, i.e., the devices are uncoordinated. The devices use a unique, but non-orthogonal preamble, known to the network, prior to sending the payload data. They do not employ any carrier sensing technique and blindly transmit the preamble and data. To detect the active users, we exploit partial channel state information (CSI), which could have been obtained through a previous channel estimate. For static devices, e.g., Internet of Things nodes, it is shown that CSI is less time-variant than assumed in many theoretical works. The presented iterative algorithm uses a maximum likelihood approach to estimate both the activity and a potential phase offset of each known device. The convergence of the proposed algorithm is evaluated. The performance in terms of probability of miss detection and false alarm is assessed for different qualities of partial CSI and different signal-to-noise ratio. △ Less

Submitted 12 January, 2023; originally announced January 2023.

Comments: This paper is presented at IEEE WCNC 2023. G. Callebaut, F. Rottenberg, L. Van der Perre, and E. G. Larsson, "Grant-Free random access of IoT devices in massive MIMO with partial CSI," in 2023 IEEE Wireless Communications and Networking Conference (WCNC) (IEEE WCNC 2023), Glasgow, United Kingdom (Great Britain), Mar. 2023

Self-Supervised Learning of Linear Precoders under Non-Linear PA Distortion for Energy-Efficient Massive MIMO Systems

Authors: Thomas Feys, Xavier Mestre, François Rottenberg

Abstract: Massive multiple input multiple output (MIMO) systems are typically designed under the assumption of linear power amplifiers (PAs). However, PAs are typically most energy-efficient when operating close to their saturation point, where they cause non-linear distortion. Moreover, when using conventional precoders, this distortion coherently combines at the user locations, limiting performance. As su… ▽ More Massive multiple input multiple output (MIMO) systems are typically designed under the assumption of linear power amplifiers (PAs). However, PAs are typically most energy-efficient when operating close to their saturation point, where they cause non-linear distortion. Moreover, when using conventional precoders, this distortion coherently combines at the user locations, limiting performance. As such, when designing an energy-efficient massive MIMO system, this distortion has to be managed. In this work, we propose the use of a neural network (NN) to learn the mapping between the channel matrix and the precoding matrix, which maximizes the sum rate in the presence of this non-linear distortion. This is done for a third-order polynomial PA model for both the single and multi-user case. By learning this mapping a significant increase in energy efficiency is achieved as compared to conventional precoders and even as compared to perfect digital pre-distortion (DPD), in the saturation regime. △ Less

Submitted 13 October, 2022; originally announced October 2022.

The Z3RO Family of Precoders Cancelling Nonlinear Power Amplification Distortion in Large Array Systems

Authors: François Rottenberg, Gilles Callebaut, Liesbet Van der Perre

Abstract: Large array systems use a massive number of antenna elements and clever precoder designs to achieve an array gain at the user location. These precoders require linear front-ends, and more specifically linear power amplifiers (PAs), to avoid distortion. This reduces the energy efficiency since PAs are most efficient close to saturation, where they generate most nonlinear distortion. Moreover, the u… ▽ More Large array systems use a massive number of antenna elements and clever precoder designs to achieve an array gain at the user location. These precoders require linear front-ends, and more specifically linear power amplifiers (PAs), to avoid distortion. This reduces the energy efficiency since PAs are most efficient close to saturation, where they generate most nonlinear distortion. Moreover, the use of conventional precoders can induce a coherent combining of distortion at the user locations, degrading the signal quality. In this work, novel linear precoders, simple to compute and to implement, are proposed that allow working close to saturation, while cancelling the third-order nonlinearity of the PA without prior knowledge of the signal statistics and PA model. Their design consists in saturating a single or a few antennas on purpose together with an negative gain with respect to all other antennas to compensate for the overall nonlinear distortion at the user location. The performance gains of the designs are significant for PAs working close to saturation, as compared to maximum ratio transmission (MRT) precoding and perfect per-antenna digital pre-distortion (DPD) compensation. △ Less

Submitted 10 June, 2022; originally announced June 2022.

Comments: arXiv admin note: text overlap with arXiv:2110.07891

Linear Precoder Design in Massive MIMO under Realistic Power Amplifier Consumption Constraint

Authors: Emanuele Peschiera, François Rottenberg

Abstract: The energy consumption of wireless networks is a growing concern. In massive MIMO systems, which are being increasingly deployed as part of the 5G roll-out, the power amplifiers in the base stations have a large impact in terms of power demands. Most of the current massive MIMO precoders are designed to minimize the transmit power. However, the efficiency of the power amplifiers depend on their op… ▽ More The energy consumption of wireless networks is a growing concern. In massive MIMO systems, which are being increasingly deployed as part of the 5G roll-out, the power amplifiers in the base stations have a large impact in terms of power demands. Most of the current massive MIMO precoders are designed to minimize the transmit power. However, the efficiency of the power amplifiers depend on their operating regime with respect to their saturation regime, and the consumed power proves to be non-linearly related to the transmit power. Power consumption-based equivalents of maximum ratio transmission, zero-forcing, and regularized zero-forcing precoders are therefore proposed. We show how the structure of the solutions radically changes. While all antennas should be active in order to minimize the transmit power, we find on the contrary that a smaller number of antennas should be activated if the objective is the power consumed by the power amplifiers. △ Less

Submitted 15 June, 2022; v1 submitted 8 June, 2022; originally announced June 2022.

Journal ref: 42nd WIC Symposium on Information Theory and Signal Processing in the Benelux (SITB 2022)

Measurement-Based Validation of Z3RO Precoder to Prevent Nonlinear Amplifier Distortion in Massive MIMO Systems

Authors: Thomas Feys, Gilles Callebaut, Liesbet Van der Perre, François Rottenberg

Abstract: In multiple input multiple output (MIMO) systems, precoding allows the base station to spatially focus and multiplex signals towards each user. However, distortion introduced by power amplifier nonlinearities coherently combines in the same spatial directions when using a conventional precoder such as maximum ratio transmission (MRT). This can strongly limit the user performance and moreover creat… ▽ More In multiple input multiple output (MIMO) systems, precoding allows the base station to spatially focus and multiplex signals towards each user. However, distortion introduced by power amplifier nonlinearities coherently combines in the same spatial directions when using a conventional precoder such as maximum ratio transmission (MRT). This can strongly limit the user performance and moreover create unauthorized out-of-band (OOB) emissions. In order to overcome this problem, the zero third-order distortion (Z3RO) precoder was recently introduced. This precoder constraints the third-order distortion at the user location to be zero. In this work, the performance of the Z3RO precoder is validated based on real-world channel measurement data. The results illustrate the reduction in distortion power at the UE locations: an average distortion reduction of 6.03 dB in the worst-case single-user scenario and 3.54 dB in the 2-user case at a back-off rate of -3 dB. △ Less

Submitted 16 September, 2022; v1 submitted 1 February, 2022; originally announced February 2022.

Journal ref: 2022 IEEE 95th Vehicular Technology Conference: (VTC2022-Spring), 2022, pp. 1-5

Array Placement in Distributed Massive MIMO for Power Saving considering Environment Information

Authors: Yi-Hang Zhu, Gilles Callebaut, Liesbet Van der Perre, François Rottenberg

Abstract: Distributed massive MIMO (D-mMIMO) has been considered for future networks as it holds the potential to offer superior capacity while enabling energy savings in the network. A D-mMIMO system has multiple arrays. Optimizing the locations of the arrays is essential for the energy efficiency of the system. In existing works, array placement has been optimized mostly based on common channel models, wh… ▽ More Distributed massive MIMO (D-mMIMO) has been considered for future networks as it holds the potential to offer superior capacity while enabling energy savings in the network. A D-mMIMO system has multiple arrays. Optimizing the locations of the arrays is essential for the energy efficiency of the system. In existing works, array placement has been optimized mostly based on common channel models, which rely on a given statistical distribution and Euclidean distance between user locations and arrays. These models are justified if applied to sufficiently large cells, where the statistical description of the channel is expected to fit its empirical condition. However, with the advent of small cells, this is no longer the case. The channel propagation condition becomes highly environment-specific. This paper investigates array placement optimization with different ways of modeling the propagation conditions taking the environment information (e.g., buildings) into account. We capture the environment information via a graph. Two shortest path-based propagation models are introduced based on the graph. We validate the performance of the models with a ray-tracing simulator considering different signal coverage levels. The simulation results demonstrate that higher energy efficiency is achieved by using the array placements found via the proposed models compared to a Euclidean distance-based propagation model in small cells. The average power saving at 96% signal coverage, for example, reaches more than 5 dB. △ Less

Submitted 16 November, 2021; originally announced November 2021.

Grant-Free Random Access in Massive MIMO for Static Low-Power IoT Nodes

Authors: Gilles Callebaut, Liesbet Van der Perre, François Rottenberg

Abstract: Massive MIMO is a promising technology to enable a massive number of Internet of Things nodes to transmit short and sporadic data bursts at low power. In conventional cellular networks, devices use a grant-based random access scheme to initiate communications. This scheme relies on a limited set of orthogonal preambles, which simplify signal processing operations at network access points. However,… ▽ More Massive MIMO is a promising technology to enable a massive number of Internet of Things nodes to transmit short and sporadic data bursts at low power. In conventional cellular networks, devices use a grant-based random access scheme to initiate communications. This scheme relies on a limited set of orthogonal preambles, which simplify signal processing operations at network access points. However, it is not well suited for Internet of Things (IoT) devices due to: (i) the large protocol overhead, and (ii) the high probability of collision. In contrast to the grant-based scheme, a grant-free approach uses user-specific preambles and has a small overhead, at the expense of more complexity at access points. In this work, a grant-free method is proposed, applicable for both co-located and cell-free deployments. The method has a closed form solution, which results in a significantly low complexity with respect to the state-of-the art. The algorithm exploits the static nature of IoT devices through the use of prior channel state information. With a power budget of 1 mW, 64 antennas are sufficient to support 1000 nodes with 200 simultaneous access requests with a probability of false alarm and miss detection below 10-6 and 10-4, respectively. △ Less

Submitted 7 July, 2022; v1 submitted 15 October, 2021; originally announced October 2021.

Z3RO Precoder Canceling Nonlinear Power Amplifier Distortion in Large Array Systems

Authors: François Rottenberg, Gilles Callebaut, Liesbet Van der Perre

Abstract: Large array-based transmission uses the combination of a massive number of antenna elements and clever precoder designs to achieve array gain and spatially multiplex different users. These precoders require linear front-ends, and more specifically linear power amplifiers (PAs). However, this reduces energy efficiency since PAs are most efficient close to saturation, where they generate most nonlin… ▽ More Large array-based transmission uses the combination of a massive number of antenna elements and clever precoder designs to achieve array gain and spatially multiplex different users. These precoders require linear front-ends, and more specifically linear power amplifiers (PAs). However, this reduces energy efficiency since PAs are most efficient close to saturation, where they generate most nonlinear distortion. Moreover, the use of conventional precoders, such as \gls{mrt}, induces a coherent combining of distortion at the user location, degrading the signal quality. In this work, a linear precoder is proposed that allows working close to saturation while canceling the coherent combining of the third order nonlinear \gls{pa} distortion at the user location. In contrast to other solutions, the zero third-order distortion (Z3RO) precoder does not require prior knowledge of the signal statistics and the PA model. The design consists of saturating a single or a few antennas on purpose together with an opposite phase shift to compensate for the distortion of all other antennas. The resulting array gain penalty becomes negligible as the number of base station antennas grows large. △ Less

Submitted 15 October, 2021; originally announced October 2021.

Spatial Distribution of Distortion due to Nonlinear Power Amplification in Distributed Massive MIMO

Authors: François Rottenberg, Gilles Callebaut, Liesbet Van der Perre

Abstract: Due to the nonlinearity of power amplifiers (PAs), the transmit signal is distorted. Previous works have studied the spatial distribution of this distortion for a central massive MIMO array. In this work, we extend the analysis for distributed massive MIMO in a line-of-sight scenario. We show that the distortion is not always uniformly distributed in space. In the single-user case, it coherently c… ▽ More Due to the nonlinearity of power amplifiers (PAs), the transmit signal is distorted. Previous works have studied the spatial distribution of this distortion for a central massive MIMO array. In this work, we extend the analysis for distributed massive MIMO in a line-of-sight scenario. We show that the distortion is not always uniformly distributed in space. In the single-user case, it coherently combines at the user location. In the few users case, the signals will add up at the user locations plus several others locations. As the number of users increases, it becomes close to uniformly distributed. As a comparison with a central massive MIMO system, having the same total number of antennas, the distortion in distributed massive MIMO is considerably more uniformly distributed in space. Moreover, the potential coherent combining is contained in a zone rather than in generic directions, i.e., in a beamspot. Furthermore, a small-scale fading effect is observed at unintended locations due to the non-coherent combining of the signals. As a result, one can expect that going towards distributed systems allows working closer to saturation, increasing the PA operating efficiency and/or using low-cost PAs. △ Less

Submitted 18 June, 2021; originally announced June 2021.

Array Placement in Distributed Massive MIMO for power saving considering Radiation Pattern

Authors: Yi-Hang Zhu, Laura Monteyne, Gilles Callebaut, François Rottenberg, Liesbet Van der Perre

Abstract: A distributed antenna system (DAS) consists of several interconnected access points (APs) which are distributed over an area. Each AP has an antenna array. In previous studies, the DAS has been demonstrated great potential to improve capacity and power efficiency compared to a centralized antenna system (CAS) which has all the antennas located in one place. The existing research also has shown tha… ▽ More A distributed antenna system (DAS) consists of several interconnected access points (APs) which are distributed over an area. Each AP has an antenna array. In previous studies, the DAS has been demonstrated great potential to improve capacity and power efficiency compared to a centralized antenna system (CAS) which has all the antennas located in one place. The existing research also has shown that the placement of the APs is essential for the performance of the DAS. However, most research on AP placement does not take into account realistic constraints. For instance, they assume that APs can be placed at any location in a region or the array radiation pattern of each AP is isotropic. This paper focuses on optimizing the AP placement for the DAS with massive MIMO (D-mMIMO) in order to reduce the transmit power. A square topology for the AP placement is applied, which is reasonable for deploying the D-mMIMO in urban areas while also offering theoretically interesting insights. We investigate the impact of the radiation pattern, signal coherence, and region size on the D-mMIMO's performance. Our results suggest that i) among the three factors, the array radiation pattern of each AP is the most important one in determining the optimal AP placement for the D-mMIMO; ii) the performance of the D-mMIMO is highly impacted by the placement and array radiation pattern of each AP, the D-mMIMO with unoptimized placement may perform even worse than the CAS with massive MIMO (C-mMIMO); iii) with the consideration of patch antennas and the mutual coupling effect, the optimized D-mMIMO can potentially save more than 7 dB transmit power compared to the C-mMIMO. Furthermore, our analytical results also provide an intuition for determining an adequate AP placement for the D-mMIMO in practice. △ Less

Submitted 13 December, 2021; v1 submitted 10 June, 2021; originally announced June 2021.

Comments: IEEE VTC2021 fall Conference, 6 pages, 7 figures

Optimal Downlink Training Sequence for Massive MIMO Secret-Key Generation

Authors: François Rottenberg

Abstract: In this paper, the secret-key capacity is maximized by optimizing the downlink training sequence in a time division duplexing (TDD) massive multiple-input-multiple-output (MIMO) scenario. Both single-user and multiple user cases are considered. As opposed to previous works, the optimal training sequence and the related secret-key capacity is characterized in closed-form in the single-user case and… ▽ More In this paper, the secret-key capacity is maximized by optimizing the downlink training sequence in a time division duplexing (TDD) massive multiple-input-multiple-output (MIMO) scenario. Both single-user and multiple user cases are considered. As opposed to previous works, the optimal training sequence and the related secret-key capacity is characterized in closed-form in the single-user case and the large antenna multiple-user case. Designs taking into account a constraint on the maximal number of pilots are also proposed. In the multiple-user case, both the max-min and the sum capacity criteria are considered, including potential user priorities. In the end, it is shown that massive MIMO boosts the secret-key capacity by leveraging: i) spatial dimensionality gain and ii) array gain. Moreover, in the large antenna case, the multiple-user capacity is obtained with no extra pilot overhead as compared to the single-user case. △ Less

Submitted 14 April, 2021; originally announced April 2021.

Physical Layer Security in a SISO Communication using Frequency-Domain Time-Reversal OFDM Precoding and Artificial Noise Injection

Authors: Sidney Jonathan Golstein, François Rottenberg, François Horlin, Philippe De Doncker, Julien Sarrazin

Abstract: A frequency domain (FD) time-reversal (TR) precoder is proposed to perform physical layer security (PLS) in single-input single-output (SISO) systems using orthogonal frequency-division multiplexing (OFDM) and artificial noise (AN) signal injection. The AN signal does not corrupt the data transmission to the legitimate receiver but degrades the decoding performance of the eavesdropper. This scheme… ▽ More A frequency domain (FD) time-reversal (TR) precoder is proposed to perform physical layer security (PLS) in single-input single-output (SISO) systems using orthogonal frequency-division multiplexing (OFDM) and artificial noise (AN) signal injection. The AN signal does not corrupt the data transmission to the legitimate receiver but degrades the decoding performance of the eavesdropper. This scheme guarantees the secrecy of a communication towards a legitimate user when the transmitter knows the instantaneous channel state information (CSI) of the legitimate link thanks to the channel reciprocity in time division duplex (TDD) systems, but does not know the instantaneous CSI of a potential eavesdropper. Three optimal decoding structures at the eavesdropper are considered in a fast fading (FF) environment depending on the handshake procedure between Alice and Bob. Closed-form approximations of the AN energy to inject in order to maximize the SR of the communication are derived. In addition, the required conditions at the legitimate receiver's end to guarantee a given SR are determined when Eve's signal-to-noise ratio (SNR) is infinite. Furthermore, a waterfilling power allocation strategy is presented to further enhance the secrecy of the scheme. Simulation results are presented to demonstrate the security performance of the proposed secure system. △ Less

Submitted 13 November, 2020; originally announced November 2020.

CSI-based versus RSS-based Secret-Key Generation under Correlated Eavesdropping

Authors: François Rottenberg, Trung-Hien Nguyen, Jean-Michel Dricot, François Horlin, Jérôme Louveaux

Abstract: Physical-layer security (PLS) has the potential to strongly enhance the overall system security as an alternative to or in combination with conventional cryptographic primitives usually implemented at higher network layers. Secret-key generation relying on wireless channel reciprocity is an interesting solution as it can be efficiently implemented at the physical layer of emerging wireless communi… ▽ More Physical-layer security (PLS) has the potential to strongly enhance the overall system security as an alternative to or in combination with conventional cryptographic primitives usually implemented at higher network layers. Secret-key generation relying on wireless channel reciprocity is an interesting solution as it can be efficiently implemented at the physical layer of emerging wireless communication networks, while providing information-theoretic security guarantees. In this paper, we investigate and compare the secret-key capacity based on the sampling of the entire complex channel state information (CSI) or only its envelope, the received signal strength (RSS). Moreover, as opposed to previous works, we take into account the fact that the eavesdropper's observations might be correlated and we consider the high signal-to-noise ratio (SNR) regime where we can find simple analytical expressions for the secret-key capacity. As already found in previous works, we find that RSS-based secret-key generation is heavily penalized as compared to CSI-based systems. At high SNR, we are able to precisely and simply quantify this penalty: a halved pre-log factor and a constant penalty of about 0.69 bit, which disappears as Eve's channel gets highly correlated. △ Less

Submitted 22 June, 2020; originally announced June 2020.

Secrecy Capacity of FBMC-OQAM Modulation over Frequency Selective Channel

Authors: François Rottenberg, Philippe De Doncker, François Horlin, Jérôme Louveaux

Abstract: This paper studies the information-theoretic secrecy capacity of an Offset-QAM-based filterbank multicarrier (FBMC-OQAM) communication over a wiretap frequency selective channel. The secrecy capacity is formulated as an optimization problem which has a closed-form solution in the high signal-to-noise ratio (SNR) regime. Two of the most common equalization strategies in FBMC-OQAM are considered, na… ▽ More This paper studies the information-theoretic secrecy capacity of an Offset-QAM-based filterbank multicarrier (FBMC-OQAM) communication over a wiretap frequency selective channel. The secrecy capacity is formulated as an optimization problem which has a closed-form solution in the high signal-to-noise ratio (SNR) regime. Two of the most common equalization strategies in FBMC-OQAM are considered, namely, single-tap and multi-tap equalization. For the sake of comparison, we also consider the secrecy capacity of a generic modulation and a cyclic prefix-orthogonal frequency division multiplexing (CP-OFDM) modulation. As a result, we find that FBMC-OQAM is particularly competitive for medium-to-long burst transmissions. △ Less

Submitted 7 April, 2020; originally announced April 2020.

Robust Non-Coherent Beamforming for FDD Downlink Massive MIMO

Authors: François Rottenberg, Ming-Chun Lee, Thomas Choi, Jianzhong Zhang, Andreas F. Molisch

Abstract: Designing beamforming techniques for the downlink (DL) of frequency division duplex (FDD) massive MIMO is known to be a challenging problem due to the difficulty of obtaining channel state information (CSI). Indeed, since the uplink-downlink bands are disjoint, the system cannot rely on channel reciprocity to estimate the channel from uplink (UL) pilots as in time division duplexing (TDD) system.… ▽ More Designing beamforming techniques for the downlink (DL) of frequency division duplex (FDD) massive MIMO is known to be a challenging problem due to the difficulty of obtaining channel state information (CSI). Indeed, since the uplink-downlink bands are disjoint, the system cannot rely on channel reciprocity to estimate the channel from uplink (UL) pilots as in time division duplexing (TDD) system. Still, in this paper, we propose original designs for robust beamformers that do not require any feedback from the users and only rely on the transmission of UL pilots. The price to pay is that the beamformer is non-coherent in the sense that it does not leverage full knowledge of the phase of each multipath component. A large variety of novel designs are proposed under different criterion and partial phase knowledge. △ Less

Submitted 1 April, 2020; originally announced April 2020.

Experimental Investigation of Frequency Domain Channel Extrapolation in Massive MIMO Systems for Zero-Feedback FDD

Authors: Thomas Choi, François Rottenberg, Jorge Gomez-Ponce, Akshay Ramesh, Peng Luo, Jianzhong Zhang, Andreas F. Molisch

Abstract: Estimating downlink (DL) channel state information (CSI) in frequency division duplex (FDD) massive multi-input multi-output (MIMO) systems generally requires downlink pilots and feedback overheads. Accordingly, this paper investigates the feasibility of zero-feedback FDD massive MIMO systems based on channel extrapolation. We use the high-resolution parameter estimation (HRPE), specifically the s… ▽ More Estimating downlink (DL) channel state information (CSI) in frequency division duplex (FDD) massive multi-input multi-output (MIMO) systems generally requires downlink pilots and feedback overheads. Accordingly, this paper investigates the feasibility of zero-feedback FDD massive MIMO systems based on channel extrapolation. We use the high-resolution parameter estimation (HRPE), specifically the space-alternating generalized expectation-maximization (SAGE) algorithm, to extrapolate the DL CSI based on the extracted parameters of multipath components in the uplink channel. We apply the HRPE to two different channel models: the vector spatial signature (VSS) model and the direction of arrival (DOA) model. We verify these methods through real-world channel data acquired from channel measurement campaigns with two different types of channel sounders: a) a switched array-based, real-time, time-domain, outdoors setup at 3.5 GHz, and b) a virtual array-based, high-accuracy, frequency-domain, indoors setup at 2.4 and 5-7 GHz. The performance metrics of the extrapolated channels that we evaluate include the mean squared error, beamforming efficiency, and spectral efficiency in multiuser MIMO scenarios. The results show that the HRPE-based channel extrapolation performs best under the simple VSS model, which does not require array calibration, and if the BS is in an open outdoor environment having line-of-sight (LOS) paths to well-separated users. △ Less

Submitted 29 September, 2020; v1 submitted 24 March, 2020; originally announced March 2020.

Comments: 15 pages, 13 figures

Journal ref: 2020 IEEE Transactions on Wireless Communications

Impact of Realistic Propagation Conditions on Reciprocity-Based Secret-Key Capacity

Authors: François Rottenberg, Philippe De Doncker, François Horlin, Jérôme Louveaux

Abstract: Secret-key generation exploiting the channel reciprocity between two legitimate parties is an interesting alternative solution to cryptographic primitives for key distribution in wireless systems as it does not rely on an access infrastructure and provides information-theoretic security. The large majority of works in the literature generally assumes that the eavesdropper gets no side information… ▽ More Secret-key generation exploiting the channel reciprocity between two legitimate parties is an interesting alternative solution to cryptographic primitives for key distribution in wireless systems as it does not rely on an access infrastructure and provides information-theoretic security. The large majority of works in the literature generally assumes that the eavesdropper gets no side information about the key from her observations provided that (i) it is spaced more than a wavelength away from a legitimate party and (ii) the channel is rich enough in scattering. In this paper, we show that this condition is not always verified in practice and we analyze the secret-key capacity under realistic propagation conditions. △ Less

Submitted 14 January, 2020; originally announced January 2020.

Double Directional Channel Measurements for THz Communications in an Urban Environment

Authors: Naveed A. Abbasi, Arjun Hariharan, Arun Moni Nair, Ahmed S. Almaiman, François B. Rottenberg, Alan E. Willner, Andreas F. Molisch

Abstract: While mm-wave systems are a mainstay for 5G communications, the inexorable increase of data rate requirements and user densities will soon require the exploration of next-generation technologies. Among these, Terahertz (THz) band communication seems to be a promising direction due to availability of large bandwidth in the electromagnetic spectrum in this frequency range, and the ability to exploit… ▽ More While mm-wave systems are a mainstay for 5G communications, the inexorable increase of data rate requirements and user densities will soon require the exploration of next-generation technologies. Among these, Terahertz (THz) band communication seems to be a promising direction due to availability of large bandwidth in the electromagnetic spectrum in this frequency range, and the ability to exploit its directional nature by directive antennas with small form factors. The first step in the analysis of any communication system is the analysis of the propagation channel, since it determines the fundamental limitations it faces. While THz channels have been explored for indoor, short-distance communications, the channels for {\em wireless access links in outdoor environments} are largely unexplored. In this paper, we present the - to our knowledge - first set of double-directional outdoor propagation channel measurements for the THz band. Specifically, the measurements are done in the 141 - 148.5 GHz range, which is one of the frequency bands recently allocated for THz research by the Federal Communication Commission (FCC). We employ double directional channel sounding using a frequency domain sounding setup based on RF-over-Fiber (RFoF) extensions for measurements over 100 m distance in urban scenarios. An important result is the surprisingly large number of directions (i.e., direction-of-arrival and direction-of-departure pairs) that carry significant energy. More generally, our results suggest fundamental parameters that can be used in future THz Band analysis and implementations. △ Less

Submitted 3 October, 2019; originally announced October 2019.

Channel Extrapolation for FDD Massive MIMO: Procedure and Experimental Results

Authors: Thomas Choi, François Rottenberg, Jorge Gomez-Ponce, Akshay Ramesh, Peng Luo, Jianzhong Zhang, Andreas F. Molisch

Abstract: Application of massive multiple-input multiple-output (MIMO) systems to frequency division duplex (FDD) is challenging mainly due to the considerable overhead required for downlink training and feedback. Channel extrapolation, i.e., estimating the channel response at the downlink frequency band based on measurements in the disjoint uplink band, is a promising solution to overcome this bottleneck.… ▽ More Application of massive multiple-input multiple-output (MIMO) systems to frequency division duplex (FDD) is challenging mainly due to the considerable overhead required for downlink training and feedback. Channel extrapolation, i.e., estimating the channel response at the downlink frequency band based on measurements in the disjoint uplink band, is a promising solution to overcome this bottleneck. This paper presents measurement campaigns obtained by using a wideband (350 MHz) channel sounder at 3.5 GHz composed of a calibrated 64 element antenna array, in both an anechoic chamber and outdoor environment. The Space Alternating Generalized Expectation-Maximization (SAGE) algorithm was used to extract the parameters (amplitude, delay, and angular information) of the multipath components from the attained channel data within the training (uplink) band. The channel in the downlink band is then reconstructed based on these path parameters. The performance of the extrapolated channel is evaluated in terms of mean squared error (MSE) and reduction of beamforming gain (RBG) in comparison to the ground truth, i.e., the measured channel at the downlink frequency. We find strong sensitivity to calibration errors and model mismatch, and also find that performance depends on propagation conditions: LOS performs significantly better than NLOS. △ Less

Submitted 26 July, 2019; originally announced July 2019.

Comments: 6 pages, 6 figures, 2019 IEEE VTC (Fall) Workshop

Journal ref: 2019 IEEE 90th Vehicular Technology Conference (VTC2019-Fall)

Performance Analysis of Channel Extrapolation in FDD Massive MIMO Systems

Authors: Francois Rottenberg, Thomas Choi, Peng Luo, Jianzhong Zhang, Andreas F. Molisch

Abstract: Channel estimation for the downlink of frequency division duplex (FDD) massive MIMO systems is well known to generate a large overhead as the amount of training generally scales with the number of transmit antennas in a MIMO system. In this paper, we consider the solution of extrapolating the channel frequency response from uplink pilot estimates to the downlink frequency band, which completely re… ▽ More Channel estimation for the downlink of frequency division duplex (FDD) massive MIMO systems is well known to generate a large overhead as the amount of training generally scales with the number of transmit antennas in a MIMO system. In this paper, we consider the solution of extrapolating the channel frequency response from uplink pilot estimates to the downlink frequency band, which completely removes the training overhead. We first show that conventional estimators fail to achieve reasonable accuracy. We propose instead to use high-resolution channel estimation. We derive theoretical lower bounds (LB) for the mean squared error (MSE) of the extrapolated channel. Assuming that the paths are well separated, the LB is simplified in an expression that gives considerable physical insight. It is then shown that the MSE is inversely proportional to the number of receive antennas while the extrapolation performance penalty scales with the square of the ratio of the frequency offset and the training bandwidth. The channel extrapolation performance is validated through numeric simulations and experimental measurements taken in an anechoic chamber. Our main conclusion is that channel extrapolation is a viable solution for FDD massive MIMO systems if accurate system calibration is performed and favorable propagation conditions are present. △ Less

Submitted 22 January, 2020; v1 submitted 28 March, 2019; originally announced April 2019.

Comments: arXiv admin note: substantial text overlap with arXiv:1902.06844

How Many Antennas Do We Need for Massive MIMO Channel Sounding? - Validating Through Measurement

Authors: Thomas Choi, François Rottenberg, Peng Luo, Jianzhong Zhang, Andreas F. Molisch

Abstract: This paper investigates the impact of the number of antennas (8 to 64) and the array configuration on massive MIMO channel parameters estimation for multiple propagation scenarios at 3.5 GHz. Different measurement environments are artificially created by placing several reflectors and absorbers in an anechoic chamber. Ground truth channel parameters, e.g, path angles, are obtained by geometry and… ▽ More This paper investigates the impact of the number of antennas (8 to 64) and the array configuration on massive MIMO channel parameters estimation for multiple propagation scenarios at 3.5 GHz. Different measurement environments are artificially created by placing several reflectors and absorbers in an anechoic chamber. Ground truth channel parameters, e.g, path angles, are obtained by geometry and trigonometric rules. Then, these are compared to the channel parameters extracted by the applying Space-Alternating Generalized Expectation-Maximization (SAGE) algorithm on the measurements. Overall, the estimation errors for various array configurations and the multiple environments are compared. This paper will help to determine the appropriate configuration of the antenna array and the parameter extraction algorithm for outdoor massive MIMO channel sounding campaigns. △ Less

Submitted 19 March, 2019; originally announced March 2019.

Comments: 2 pages, 2 figures, IEEE APS/URSI 2019

Channel Extrapolation in FDD Massive MIMO: Theoretical Analysis and Numerical Validation

Authors: François Rottenberg, Rui Wang, Jianzhong Zhang, Andreas F. Molisch

Abstract: Downlink channel estimation in massive MIMO systems is well known to generate a large overhead in frequency division duplex (FDD) mode as the amount of training generally scales with the number of transmit antennas. Using instead an extrapolation of the channel from the measured uplink estimates to the downlink frequency band completely removes this overhead. In this paper, we investigate the theo… ▽ More Downlink channel estimation in massive MIMO systems is well known to generate a large overhead in frequency division duplex (FDD) mode as the amount of training generally scales with the number of transmit antennas. Using instead an extrapolation of the channel from the measured uplink estimates to the downlink frequency band completely removes this overhead. In this paper, we investigate the theoretical limits of channel extrapolation in frequency. We highlight the advantage of basing the extrapolation on high-resolution channel estimation. A lower bound (LB) on the mean squared error (MSE) of the extrapolated channel is derived. A simplified LB is also proposed, giving physical intuition on the SNR gain and extrapolation range that can be expected in practice. The validity of the simplified LB relies on the assumption that the paths are well separated. The SNR gain then linearly improves with the number of receive antennas while the extrapolation performance penalty quadratically scales with the ratio of the frequency and the training bandwidth. The theoretical LB is numerically evaluated using a 3GPP channel model and we show that the LB can be reached by practical high-resolution parameter extraction algorithms. Our results show that there are strong limitations on the extrapolation range than can be expected in SISO systems while much more promising results can be obtained in the multiple-antenna setting as the paths can be more easily separated in the delay-angle domain. △ Less

Submitted 18 February, 2019; originally announced February 2019.

WaveComBox: a Matlab Toolbox for Communications using New Waveforms

Authors: François Rottenberg, Mathieu Van Eeckhaute, Trung-Hien Nguyen, François Horlin, Jérôme Louveaux

Abstract: Future generations of communications systems will target a very wide range of applications. Each application comes with its own set of requirements in terms of data rate, latency, user density, reliability... Accommodating this large variety of specifications implies the need for a novel physical layer technology. In this regard, the most popular modulation nowadays, namely, the orthogonal frequen… ▽ More Future generations of communications systems will target a very wide range of applications. Each application comes with its own set of requirements in terms of data rate, latency, user density, reliability... Accommodating this large variety of specifications implies the need for a novel physical layer technology. In this regard, the most popular modulation nowadays, namely, the orthogonal frequency division multiplexing modulation, is characterized by a poor time-frequency localization, implying strong limitations. In the light of these limitations, communications using new waveforms, relying on more sophisticated signal processing techniques and providing improved time-frequency localization, have attracted a lot of attention for the last decade. At the same time, the higher complexity of these new waveforms, not only in terms of implementation but also conceptually, creates an entrance barrier that slows down their adoption by industries, standardization bodies and more generally in the telecommunication community. The WaveComBox toolbox, freely available at www.wavecombox.com, is a user-friendly, open-source and well documented piece of software aiming at considerably lowering the entrance barrier of recently proposed waveforms. This article first describes the general abstract structure of the toolbox. Secondly, examples are given to illustrate how to use the toolbox and to show some more advanced functionalities. △ Less

Submitted 5 February, 2020; v1 submitted 28 June, 2018; originally announced June 2018.

Single-Tap Precoders and Decoders for Multi-User MIMO FBMC-OQAM under Strong Channel Frequency Selectivity

Authors: François Rottenberg, Xavier Mestre, François Horlin, Jérôme Louveaux

Abstract: The design of linear precoders or decoders for multiuser (MU) multiple-input multiple-output (MIMO) filterbank multicarrier (FBMC) modulations in the case of strong channel frequency selectivity is presented. The users and the base station (BS) communicate using space division multiple access (SDMA). The low complexity proposed solution is based on a single tap per-subcarrier precoding/decoding ma… ▽ More The design of linear precoders or decoders for multiuser (MU) multiple-input multiple-output (MIMO) filterbank multicarrier (FBMC) modulations in the case of strong channel frequency selectivity is presented. The users and the base station (BS) communicate using space division multiple access (SDMA). The low complexity proposed solution is based on a single tap per-subcarrier precoding/decoding matrix at the base station (BS) in the downlink/uplink. As opposed to classical approaches that assume flat channel frequency selectivity at the subcarrier level, the BS does not make this assumption and takes into account the distortion caused by channel frequency selectivity. The expression of the FBMC asymptotic mean squared error (MSE) in the case of strong channel selectivity derived in earlier works is developed and extended. The linear precoders and decoders are found by optimizing the MSE formula under two design criteria, namely zero forcing (ZF) or minimum mean squared error (MMSE). Finally, simulation results demonstrate the performance of the optimized design. As long as the number of BS antennas is larger than the number of users, it is shown that those extra degrees of freedom can be used to compensate for the channel frequency selectivity. △ Less

Submitted 8 November, 2016; originally announced November 2016.

Journal ref: IEEE Transactions on Signal Processing (2016)