-
Asymptotic evaluation of the Sinc transform of entire exponential type function resulting to exact polynomial asymptotic behavior
Authors:
Nathalie Liezel R. Rojas,
Eric A. Galapon
Abstract:
We consider the asymptotic evaluation of the integral transform $\int_0^\infty f(x) \, \sin^n(λx)/x^n \,\text{d} x$ of an exponential type function $f(x)$ of type $τ>0$, for large values of the parameter $λ$, where $n$ is a positive integer. We refer to this integral as the Sinc transform. Under the condition that $f(x)$ is even with respect to $x$, we derive a terminating asymptotic expansion of…
▽ More
We consider the asymptotic evaluation of the integral transform $\int_0^\infty f(x) \, \sin^n(λx)/x^n \,\text{d} x$ of an exponential type function $f(x)$ of type $τ>0$, for large values of the parameter $λ$, where $n$ is a positive integer. We refer to this integral as the Sinc transform. Under the condition that $f(x)$ is even with respect to $x$, we derive a terminating asymptotic expansion of the Sinc transform which behave as a polynomial in positive powers of $λ$ as $λ$ grows large provided that the conditions $λ> τ/2$ for even $n$ and $λ>τ$ for odd n are satisfied.
△ Less
Submitted 6 May, 2025;
originally announced May 2025.
-
Imperceptible Adversarial Examples in the Physical World
Authors:
Weilin Xu,
Sebastian Szyller,
Cory Cornelius,
Luis Murillo Rojas,
Marius Arvinte,
Alvaro Velasquez,
Jason Martin,
Nageen Himayat
Abstract:
Adversarial examples in the digital domain against deep learning-based computer vision models allow for perturbations that are imperceptible to human eyes. However, producing similar adversarial examples in the physical world has been difficult due to the non-differentiable image distortion functions in visual sensing systems. The existing algorithms for generating physically realizable adversaria…
▽ More
Adversarial examples in the digital domain against deep learning-based computer vision models allow for perturbations that are imperceptible to human eyes. However, producing similar adversarial examples in the physical world has been difficult due to the non-differentiable image distortion functions in visual sensing systems. The existing algorithms for generating physically realizable adversarial examples often loosen their definition of adversarial examples by allowing unbounded perturbations, resulting in obvious or even strange visual patterns. In this work, we make adversarial examples imperceptible in the physical world using a straight-through estimator (STE, a.k.a. BPDA). We employ STE to overcome the non-differentiability -- applying exact, non-differentiable distortions in the forward pass of the backpropagation step, and using the identity function in the backward pass. Our differentiable rendering extension to STE also enables imperceptible adversarial patches in the physical world. Using printout photos, and experiments in the CARLA simulator, we show that STE enables fast generation of $\ell_\infty$ bounded adversarial examples despite the non-differentiable distortions. To the best of our knowledge, this is the first work demonstrating imperceptible adversarial examples bounded by small $\ell_\infty$ norms in the physical world that force zero classification accuracy in the global perturbation threat model and cause near-zero ($4.22\%$) AP50 in object detection in the patch perturbation threat model. We urge the community to re-evaluate the threat of adversarial examples in the physical world.
△ Less
Submitted 25 November, 2024;
originally announced November 2024.
-
Terminating Poincare asymptotic expansion of the Hankel transform of entire exponential type functions
Authors:
Nathalie Liezel R. Rojas,
Eric A. Galapon
Abstract:
We perform an asymptotic evaluation of the Hankel transform, $\int_0^{\infty}J_ν(λx) f(x)\mathrm{d}x$, for arbitrarily large $λ$ of an entire exponential type function, $f(x)$, of type $τ$ by shifting the contour of integration in the complex plane. Under the situation that $J_ν(λx)f(x)$ has an odd parity with respect to $x$ and the condition that the asymptotic parameter $λ$ is greater than the t…
▽ More
We perform an asymptotic evaluation of the Hankel transform, $\int_0^{\infty}J_ν(λx) f(x)\mathrm{d}x$, for arbitrarily large $λ$ of an entire exponential type function, $f(x)$, of type $τ$ by shifting the contour of integration in the complex plane. Under the situation that $J_ν(λx)f(x)$ has an odd parity with respect to $x$ and the condition that the asymptotic parameter $λ$ is greater than the type $τ$, we obtain an exactly terminating Poincar{é} expansion without any trailing subdominant exponential terms. That is the Hankel transform evaluates exactly into a polynomial in inverse $λ$ as $λ$ approaches infinity.
△ Less
Submitted 17 September, 2024;
originally announced September 2024.
-
Performance estimation of photonic integrated wavefront corrector for single-mode fiber coupling
Authors:
Dhwanil Patel,
Momen Diab,
Ross Cheriton,
Jacob Taylor,
Libertad Rojas,
Suresh Sivanandam
Abstract:
Many modern astronomical instruments rely on the optimal coupling of starlight into single-mode fibers (SMFs). For ground-based telescopes, this coupling is limited by atmospheric turbulence. We propose an integrated wavefront corrector based on silicon-on-insulator (SOI) photonics, which samples the aberrated wavefront via a microlens array (MLA). The MLA focuses the sampled wavefront onto an arr…
▽ More
Many modern astronomical instruments rely on the optimal coupling of starlight into single-mode fibers (SMFs). For ground-based telescopes, this coupling is limited by atmospheric turbulence. We propose an integrated wavefront corrector based on silicon-on-insulator (SOI) photonics, which samples the aberrated wavefront via a microlens array (MLA). The MLA focuses the sampled wavefront onto an array of grating couplers that inject the beamlets into the single-mode waveguides of the corrector. The beams in each waveguide are then shifted in phase using thermo-optic phase shifters before combining the co-phased beams into one single-mode waveguide. In this work, we analyze the external factors that we anticipate will impact the performance of the corrector. Specifically, we study the effects of the telescope pupil function with obscuration, determine whether the corrector requires tip/tilt pre-correction, and analyze the impact of scintillation on the correction quality.
△ Less
Submitted 22 August, 2024;
originally announced August 2024.
-
Experimental demonstration of photonic phase correctors based on grating coupler arrays and thermo-optic shifters
Authors:
Momen Diab,
Ross Cheriton,
Jacob Taylor,
Dhwanil Patel,
Libertad Rojas,
Mark Barnet,
Polina Zavyalova,
Dan-Xia Xu,
Pavel Cheben,
Siegfried Janz,
Jens H. Schmid,
Suresh Sivanandam
Abstract:
In ground-based astronomy, the ability to couple light into single-mode fibers (SMFs) is limited by atmospheric turbulence, which prohibits the use of many astrophotonic instruments. We propose a silicon-on-insulator photonic chip capable of coherently coupling the out-of-phase beamlets from the subapertures of a telescope pupil into an SMF. The photonic integrated circuit (PIC) consists of an arr…
▽ More
In ground-based astronomy, the ability to couple light into single-mode fibers (SMFs) is limited by atmospheric turbulence, which prohibits the use of many astrophotonic instruments. We propose a silicon-on-insulator photonic chip capable of coherently coupling the out-of-phase beamlets from the subapertures of a telescope pupil into an SMF. The photonic integrated circuit (PIC) consists of an array of grating couplers that are used to inject light from free space into single-mode waveguides on the chip. Metallic heaters modulate the refractive index of a coiled section of the waveguides, facilitating the co-phasing of the propagating modes. The phased beamlets can then be coherently combined to efficiently deliver the light to an output SMF. In an adaptive optics (AO) system, the phase corrector acts as a deformable mirror (DM) commanded by a controller that takes phase measurements from a wavefront sensor (WFS). We present experimental results for the PIC tested on an AO testbed and compare the performance to simulations.
△ Less
Submitted 14 August, 2024;
originally announced August 2024.
-
End-to-end simulations of photonic phase correctors for adaptive optics systems
Authors:
Dhwanil Patel,
Momen Diab,
Ross Cheriton,
Jacob Taylor,
Libertad Rojas,
Martin Vachon,
Dan-Xia Xu,
Jens H. Schmid,
Pavel Cheben,
Siegfried Janz,
Suresh Sivanandam
Abstract:
Optical beams and starlight distorted by atmospheric turbulence can be corrected with adaptive optics systems to enable efficient coupling into single-mode fibers. Deformable mirrors, used to flatten the wavefront in astronomical telescopes, are costly, sensitive, and complex mechanical components that require careful calibration to enable high-quality imaging in astronomy, microscopy, and vision…
▽ More
Optical beams and starlight distorted by atmospheric turbulence can be corrected with adaptive optics systems to enable efficient coupling into single-mode fibers. Deformable mirrors, used to flatten the wavefront in astronomical telescopes, are costly, sensitive, and complex mechanical components that require careful calibration to enable high-quality imaging in astronomy, microscopy, and vision science. They are also impractical to deploy in large numbers for non-imaging applications like free-space optical communication. Here, we propose a photonic integrated c rcuit capable of spatially sampling the wavefront collected by the telescope and co-phasing the subapertures to maximize the flux delivered to an output single-mode fiber as the integrated photonic implementation of a deformable mirror. We present the results of end-to-end simulations to quantify the performance of the proposed photonic solution under varying atmospheric conditions toward realizing an adaptive optics system without a deformable mirror for free-space optical receivers.
△ Less
Submitted 15 July, 2024;
originally announced July 2024.
-
A Hierarchical Bayesian Model for Stochastic Spatiotemporal SIR Modeling and Prediction of COVID-19 Cases and Hospitalizations
Authors:
Curtis B. Storlie,
Ricardo L. Rojas,
Gabriel O. Demuth,
Benjamin D. Pollock,
Patrick W. Johnson,
Patrick M. Wilson,
Ethan P. Heinzen,
Hongfang Liu,
Rickey E. Carter,
Sean C. Dowdy,
Shannon M. Dunlay,
Elizabeth B. Habermann,
Daryl J. Kor,
Matthew R. Neville,
Andrew H. Limper,
Katherine H. Noe,
Mohamad Bydon,
Pablo Moreno Franco,
Priya Sampathkumar,
Nilay D. Shah,
Henry H. Ting
Abstract:
Most COVID-19 predictive modeling efforts use statistical or mathematical models to predict national- and state-level COVID-19 cases or deaths in the future. These approaches assume parameters such as reproduction time, test positivity rate, hospitalization rate, and social intervention effectiveness (masking, distancing, and mobility) are constant. However, the one certainty with the COVID-19 pan…
▽ More
Most COVID-19 predictive modeling efforts use statistical or mathematical models to predict national- and state-level COVID-19 cases or deaths in the future. These approaches assume parameters such as reproduction time, test positivity rate, hospitalization rate, and social intervention effectiveness (masking, distancing, and mobility) are constant. However, the one certainty with the COVID-19 pandemic is that these parameters change over time, as well as vary across counties and states. In fact, the rate of spread over region, hospitalization rate, hospital length of stay and mortality rate, the proportion of the population that is susceptible, test positivity rate, and social behaviors can all change significantly over time. Thus, the quantification of uncertainty becomes critical in making meaningful and accurate forecasts of the future. Bayesian approaches are a natural way to fully represent this uncertainty in mathematical models and have become particularly popular in physics and engineering models. The explicit integration time varying parameters and uncertainty quantification into a hierarchical Bayesian forecast model differentiates the Mayo COVID-19 model from other forecasting models. By accounting for all sources of uncertainty in both parameter estimation as well as future trends with a Bayesian approach, the Mayo COVID-19 model accurately forecasts future cases and hospitalizations, as well as the degree of uncertainty. This approach has been remarkably accurate and a linchpin in Mayo Clinic's response to managing the COVID-19 pandemic. The model accurately predicted timing and extent of the summer and fall surges at Mayo Clinic sites, allowing hospital leadership to manage resources effectively to provide a successful pandemic response. This model has also proven to be very useful to the state of Minnesota to help guide difficult policy decisions.
△ Less
Submitted 8 April, 2021;
originally announced April 2021.
-
Tunable layered-magnetism-assisted magneto-Raman effect in a two-dimensional magnet $\mathrm{CrI_3}$
Authors:
Wencan Jin,
Zhipeng Ye,
Xiangpeng Luo,
Bowen Yang,
Gaihua Ye,
Fangzhou Yin,
Hyun Ho Kim,
Laura Rojas,
Shangjie Tian,
Yang Fu,
Shaohua Yan,
Hechang Lei,
Kai Sun,
Adam W. Tsen,
Rui He,
Liuyan Zhao
Abstract:
We use a combination of polarized Raman spectroscopy experiment and model magnetism-phonon coupling calculations to study the rich magneto-Raman effect in the two-dimensional (2D) magnet $\mathrm{CrI_3}$. We reveal a novel layered-magnetism-assisted phonon scattering mechanism below the magnetic onset temperature, whose Raman excitation breaks time-reversal symmetry, has an antisymmetric Raman ten…
▽ More
We use a combination of polarized Raman spectroscopy experiment and model magnetism-phonon coupling calculations to study the rich magneto-Raman effect in the two-dimensional (2D) magnet $\mathrm{CrI_3}$. We reveal a novel layered-magnetism-assisted phonon scattering mechanism below the magnetic onset temperature, whose Raman excitation breaks time-reversal symmetry, has an antisymmetric Raman tensor, and follows the magnetic phase transitions across critical magnetic fields, on top of the presence of the conventional phonon scattering with symmetric Raman tensors in $N$-layer $\mathrm{CrI_3}$. We resolve in data and by calculations that the 1st-order $A_g$ phonon of monolayer splits into a $N$-fold multiplet in $N$-layer $\mathrm{CrI_3}$ due to the interlayer coupling ($N$>=2) and that the phonons with the multiple show distinct magnetic field dependence because of their different layered-magnetism-phonon coupling. We further find that such a layered-magnetism-phonon coupled Raman scattering mechanism extends beyond 1st-order to higher-order multi-phonon scattering processes. Our results on magneto-Raman effect of the 1st-order phonons in the multiplet and the higher-order multi-phonons in $N$-layer $\mathrm{CrI_3}$ demonstrate the rich and strong behavior of emergent magneto-optical effects in 2D magnets and underlines the unique opportunities of new spin-phonon physics in van der Waals layered magnets.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Observation of the polaronic character of excitons in a two-dimensional semiconducting magnet $\mathrm{CrI_3}$
Authors:
Wencan Jin,
Hyun Ho Kim,
Zhipeng Ye,
Gaihua Ye,
Laura Rojas,
Xiangpeng Luo,
Bowen Yang,
Fangzhou Yin,
Jason Shih An Horng,
Shangjie Tian,
Yang Fu,
Gongjun Xu,
Hui Deng,
Hechang Lei,
Kai Sun,
Adam W. Tsen,
Rui He,
Liuyan Zhao
Abstract:
Exciton dynamics can be strongly affected by lattice vibrations through electron-phonon coupling. This is rarely explored in two-dimensional magnetic semiconductors. Focusing on bilayer CrI3, we first show the presence of strong electron-phonon coupling through temperature-dependent photoluminescence and absorption spectroscopy. We then report the observation of periodic broad modes up to the 8th…
▽ More
Exciton dynamics can be strongly affected by lattice vibrations through electron-phonon coupling. This is rarely explored in two-dimensional magnetic semiconductors. Focusing on bilayer CrI3, we first show the presence of strong electron-phonon coupling through temperature-dependent photoluminescence and absorption spectroscopy. We then report the observation of periodic broad modes up to the 8th order in Raman spectra, attributed to the polaronic character of excitons. We establish that this polaronic character is dominated by the coupling between the charge-transfer exciton at 1.96 eV and a longitudinal optical phonon at 120.6 cm-1. We further show that the emergence of long-range magnetic order enhances the electron-phonon coupling strength by about 50$\%$ and that the transition from layered antiferromagnetic to ferromagnetic order tunes the spectral intensity of the periodic broad modes, suggesting a strong coupling among the lattice, charge and spin in two-dimensional CrI3. Our study opens opportunities for tailoring light-matter interactions in two-dimensional magnetic semiconductors.
△ Less
Submitted 22 September, 2020; v1 submitted 28 February, 2020;
originally announced March 2020.
-
Single-step exfoliation and functionalization of few-layers black phosphorus and its application for polymer composites
Authors:
Antonio Esau Del Rio Castillo,
Christian Daniel Reyes,
Laura Edith Rojas,
Sanjay B. Thorat,
Michele Serri,
Ana Laura Martinez,
Carlos Velasco,
Vittorio Pellegrini,
Francesco Bonaccorso
Abstract:
We demonstrate the large scale exfoliation of bulk black phosphorus into few-layers black phosphorus. We use wet-jet mill (WJM) as an industrially scalable exfoliation technique. In order to avoid the degradation by oxidation of the exfoliated flakes, the few-layers black phosphorus is protected by functionalisation (with 4-bromobenzene-diazonium tetrafluoroborate) during the exfoliation process.…
▽ More
We demonstrate the large scale exfoliation of bulk black phosphorus into few-layers black phosphorus. We use wet-jet mill (WJM) as an industrially scalable exfoliation technique. In order to avoid the degradation by oxidation of the exfoliated flakes, the few-layers black phosphorus is protected by functionalisation (with 4-bromobenzene-diazonium tetrafluoroborate) during the exfoliation process. We used the exfoliated and functionalised flakes as fillers in a polymethyl methacrylate matrix to test the mechanical endurance, obtaining an improvement in the Young modulus of 106% compared to the bare polymer. These data support the development of black phosphorus materials as 2D-polymer fillers and performance-enhancers.
△ Less
Submitted 21 February, 2020;
originally announced February 2020.
-
High-gravity Spreading of Liquid Coatings on Wetting Flexible Substrates
Authors:
Chen Yang,
Adam Burrous,
Jingjin Xie,
Hassan Shaikh,
Akofa Elike-Avion,
Luis Rojas,
Adithya Ramachandran,
Wonjae Choi,
Aaron D. Mazzeo
Abstract:
This work describes a mechanical approach for manipulating the capillary length and spreading of liquid coatings on flexible substrates with high gravity. Experimental verification in the literature has focused on cases under standard gravity on earth, and to the authors' knowledge, this work is the first to explore its relevance to spreading puddles under high gravity. By using centrifugation wit…
▽ More
This work describes a mechanical approach for manipulating the capillary length and spreading of liquid coatings on flexible substrates with high gravity. Experimental verification in the literature has focused on cases under standard gravity on earth, and to the authors' knowledge, this work is the first to explore its relevance to spreading puddles under high gravity. By using centrifugation with a high-density liquid base underneath a coated substrate, it is possible to apply acceleration normal to a substrate to decrease the capillary length and increase the rate of spreading. Due to the nature of centrifugation, this method works primarily on flexible substrates, which bend with a curvature that conforms to a contour of uniformly distributed centrifugal acceleration. With high gravity of 600 g applied, the capillary length reduces by a factor of 24.5, and the spreading shifts from "transient spreading" between the surface tension-driven and gravity-driven regimes to the gravity-driven regime. Experimental results show that high gravitational acceleration will enhance the rate of spreading such that a puddle, which would require 12 hours under standard gravity on earth to go from an 8-μl droplet to a 40-μm thick puddle, would require less than 1 minute under 600 g. Overall, this work suggests that previously derived expressions for gravity-driven spreading of puddles under earth's standard gravity extend to predicting the behavior of puddles spreading on smooth, wetting substrates exposed to more than 100 g's of acceleration.
△ Less
Submitted 14 September, 2015;
originally announced September 2015.
-
MegaMorph: classifying galaxy morphology using multi-wavelength Sérsic profile fits
Authors:
M. Vika,
B. Vulcani,
S. P. Bamford,
B. Häußler,
A. L. Rojas
Abstract:
Aims. This work investigates the potential of using the wavelength-dependence of galaxy structural parameters (Sérsic index, n, and effective radius, Re) to separate galaxies into distinct types. Methods. A sample of nearby galaxies with reliable visual morphologies is considered, for which we measure structural parameters by fitting multi-wavelength single-Sérsic models. Additionally, we use a se…
▽ More
Aims. This work investigates the potential of using the wavelength-dependence of galaxy structural parameters (Sérsic index, n, and effective radius, Re) to separate galaxies into distinct types. Methods. A sample of nearby galaxies with reliable visual morphologies is considered, for which we measure structural parameters by fitting multi-wavelength single-Sérsic models. Additionally, we use a set of artificially redshifted galaxies to test how these classifiers behave when the signal-to-noise decreases. Results. We show that the wavelength-dependence of n may be employed to separate visually-classified early- and late-type galaxies, in a manner similar to the use of colour and n. Furthermore, we find that the wavelength variation of n can recover galaxies that are misclassified by these other morphological proxies. Roughly half of the spiral galaxies that contaminate an early-type sample selected using (u-r) versus n can be correctly identified as late-types by N, the ratio of n measured in two different bands. Using a set of artificially-redshifted images, we show that this technique remains effective up to z ~ 0.1. N can therefore be used to achieve purer samples of early-types and more complete samples of late-types than using a colour-n cut alone. We also study the suitability of R, the ratio of Re in two different bands, as a morphological classifier, but find that the average sizes of both early- and late-type galaxies do not change substantially over optical wavelengths.
△ Less
Submitted 19 February, 2015;
originally announced February 2015.
-
MegaMorph -- multi-wavelength measurement of galaxy structure: physically meaningful bulge-disc decomposition of galaxies near and far
Authors:
Marina Vika,
Steven P. Bamford,
Boris Häußler,
Alex L. Rojas
Abstract:
Bulge-disc decomposition is a valuable tool for understanding galaxies. However, achieving robust measurements of component properties is difficult, even with high quality imaging, and it becomes even more so with the imaging typical of large surveys.
In this paper we consider the advantages of a new, multi-band approach to galaxy fitting. We perform automated bulge-disc decompositions for 163 n…
▽ More
Bulge-disc decomposition is a valuable tool for understanding galaxies. However, achieving robust measurements of component properties is difficult, even with high quality imaging, and it becomes even more so with the imaging typical of large surveys.
In this paper we consider the advantages of a new, multi-band approach to galaxy fitting. We perform automated bulge-disc decompositions for 163 nearby galaxies, by simultaneously fitting multiple images taken in five photometric filters. We show that we are able to recover structural measurements that agree well with various other works, and confirm a number of key results. We additionally use our results to illustrate the link between total Sérsic index and bulge-disc structure, and demonstrate that the visually classification of lenticular galaxies is strongly dependent on the inclination of their disc component.
By simulating the same set of galaxies as they would appear if observed at a range of redshifts, we are able to study the behaviour of bulge-disc decompositions as data quality diminishes. We examine how our multi-band fits perform, and compare to the results of more conventional, single-band methods. Multi-band fitting improves the measurement of all parameters, but particularly the bulge-to total flux ratio and component colours. We therefore encourage the use of this approach with future surveys.
△ Less
Submitted 18 August, 2014;
originally announced August 2014.
-
MegaMorph -- multi-wavelength measurement of galaxy structure: Sérsic profile fits to galaxies near and far
Authors:
Marina Vika,
Steven P. Bamford,
Boris Haeussler,
Alex L. Rojas,
Andrea Borch,
Robert C. Nichol
Abstract:
We demonstrate a new multi-wavelength technique for two-dimensional parametric modelling of galaxy surface-brightness profiles, which we have incorporated into the widely used software GALFIT. Our new method, named GALFITM, extends GALFIT3's current single-band fitting process by simultaneously using multiple images of the same galaxy to constrain a wavelength-dependent model. Each standard profil…
▽ More
We demonstrate a new multi-wavelength technique for two-dimensional parametric modelling of galaxy surface-brightness profiles, which we have incorporated into the widely used software GALFIT. Our new method, named GALFITM, extends GALFIT3's current single-band fitting process by simultaneously using multiple images of the same galaxy to constrain a wavelength-dependent model. Each standard profile parameter may vary as a function of wavelength, with a user-definable degree of smoothness, from constant to fully free. The performance of GALFITM is evaluated by fitting elliptical Sérsic profiles to ugriz imaging data for 4026 galaxies, comprising the original SDSS imaging for 163 low redshift (v < 7000 kms) galaxies and 3863 artificially redshifted (0.01 < z < 0.25) images of the same galaxies.
Comparing results from single-band and multi-band techniques, we show that GALFITM significantly improves the extraction of information, particularly from bands with low signal-to-noise ratio (e.g., u and z SDSS bands) when combined with higher signal-to-noise images. We also study systematic trends in the recovered parameters, particularly Sérsic index, that appear when one performs measurements of the same galaxies at successively higher redshifts. We argue that it is vital that studies investigating the evolution of galaxy structure are careful to avoid or correct for these biases.
The resulting multi-band photometric structural parameters for our sample of 163 galaxies are provided. We demonstrate the importance of considering multi-band measurements by showing that the Sérsic indices of spiral galaxies increase to redder wavelengths, as expected for composite bulge-disk systems. Finally, for the ellipticals in our sample, which should be well-represented by single-Sérsic models, we compare our measured parameters to those from previous studies.
△ Less
Submitted 18 July, 2013;
originally announced July 2013.
-
MegaMorph - multi-wavelength measurement of galaxy structure: complete Sérsic profile information from modern surveys
Authors:
Boris Häußler,
Steven P. Bamford,
Marina Vika,
Alex L. Rojas,
Marco Barden,
Lee S. Kelvin,
Mehmet Alpaslan,
Aaron S. G. Robotham,
Simon P. Driver,
I. K. Baldry,
Sarah Brough,
Andrew M. Hopkins,
Jochen Liske,
Robert C. Nichol,
Cristina. C. Popescu,
Richard J. Tuffs
Abstract:
In this paper, we demonstrate a new method for fitting galaxy profiles which makes use of the full multi-wavelength data provided by modern large optical-near-infrared imaging surveys. We present a new version of GALAPAGOS, which utilises a recently-developed multi-wavelength version of GALFIT, and enables the automated measurement of wavelength dependent Sérsic profile parameters for very large s…
▽ More
In this paper, we demonstrate a new method for fitting galaxy profiles which makes use of the full multi-wavelength data provided by modern large optical-near-infrared imaging surveys. We present a new version of GALAPAGOS, which utilises a recently-developed multi-wavelength version of GALFIT, and enables the automated measurement of wavelength dependent Sérsic profile parameters for very large samples of galaxies. Our new technique is extensively tested to assess the reliability of both pieces of software, GALFIT and GALAPAGOS on both real ugrizY JHK imaging data from the GAMA survey and simulated data made to the same specifications. We find that fitting galaxy light profiles with multi-wavelength data increases the stability and accuracy of the measured parameters, and hence produces more complete and meaningful multi-wavelength photometry than has been available previously. The improvement is particularly significant for magnitudes in low S/N bands and for structural parameters like half-light radius re and Sérsic index n for which a prior is used by constraining these parameters to a polynomial as a function of wavelength. This allows the fitting routines to push the magnitude of galaxies for which sensible values can be derived to fainter limits. The technique utilises a smooth transition of galaxy parameters with wavelength, creating more physically meaningful transitions than single-band fitting and allows accurate interpolation between passbands, perfect for derivation of rest-frame values.
△ Less
Submitted 13 December, 2012;
originally announced December 2012.
-
Revealing components of the galaxy population through nonparametric techniques
Authors:
Steven P. Bamford,
Alex L. Rojas,
Robert C. Nichol,
Christopher J. Miller,
Larry Wasserman,
Christopher R. Genovese,
Peter E. Freeman
Abstract:
The distributions of galaxy properties vary with environment, and are often multimodal, suggesting that the galaxy population may be a combination of multiple components. The behaviour of these components versus environment holds details about the processes of galaxy development. To release this information we apply a novel, nonparametric statistical technique, identifying four components presen…
▽ More
The distributions of galaxy properties vary with environment, and are often multimodal, suggesting that the galaxy population may be a combination of multiple components. The behaviour of these components versus environment holds details about the processes of galaxy development. To release this information we apply a novel, nonparametric statistical technique, identifying four components present in the distribution of galaxy H$α$ emission-line equivalent-widths. We interpret these components as passive, star-forming, and two varieties of active galactic nuclei. Independent of this interpretation, the properties of each component are remarkably constant as a function of environment. Only their relative proportions display substantial variation. The galaxy population thus appears to comprise distinct components which are individually independent of environment, with galaxies rapidly transitioning between components as they move into denser environments.
△ Less
Submitted 16 September, 2008;
originally announced September 2008.
-
Effects of bone- and air-tissue inhomogeneities on the dose distributions of the Leksell Gamma Knife$^{\circledR}$ calculated with PENELOPE
Authors:
Feras M. O. Al-Dweri,
E. Leticia Rojas,
Antonio M. Lallena
Abstract:
Monte Carlo simulation with PENELOPE (v.~2003) is applied to calculate Leksell Gamma Knife$^{\circledR}$ dose distributions for heterogeneous phantoms. The usual spherical water phantom is modified with a spherical bone shell simulating the skull and an air-filled cube simulating the frontal or maxillary sinuses. Different simulations of the 201 source configuration of the Gamma Knife have been…
▽ More
Monte Carlo simulation with PENELOPE (v.~2003) is applied to calculate Leksell Gamma Knife$^{\circledR}$ dose distributions for heterogeneous phantoms. The usual spherical water phantom is modified with a spherical bone shell simulating the skull and an air-filled cube simulating the frontal or maxillary sinuses. Different simulations of the 201 source configuration of the Gamma Knife have been carried out with a simplified model of the geometry of the source channel of the Gamma Knife recently tested for both single source and multisource configurations. The dose distributions determined for heterogeneous phantoms including the bone- and/or air-tissue interfaces show non negligible differences with respect to those calculated for a homogeneous one, mainly when the Gamma Knife isocenter approaches the separation surfaces. Our findings confirm an important underdosage ($\sim$10%) nearby the air-tissue interface, in accordance with previous results obtained with PENELOPE code with a procedure different to ours. On the other hand, the presence of the spherical shell simulating the skull produces a few percent underdosage at the isocenter wherever it is situated.
△ Less
Submitted 19 October, 2005;
originally announced October 2005.
-
On the Chow rings of classifying spaces for classical groups
Authors:
Luis Alberto Molina Rojas,
Angelo Vistoli
Abstract:
We show how the stratification method, introduced by Vezzosi in his study of PGL_3, provides a unified approach to the known computations of the Chow rings of the classifying spaces of GL_n, SL_n, Sp_n, O_n and SO_n.
We show how the stratification method, introduced by Vezzosi in his study of PGL_3, provides a unified approach to the known computations of the Chow rings of the classifying spaces of GL_n, SL_n, Sp_n, O_n and SO_n.
△ Less
Submitted 8 July, 2005; v1 submitted 26 May, 2005;
originally announced May 2005.
-
Dosimetry for radiocolloid therapy of cystic craniopharyngiomas
Authors:
E. Leticia Rojas,
Feras M. O. Al-Dweri,
Antonio M. Lallena,
Coral Bodineau,
Pedro Galan
Abstract:
The dosimetry for radiocolloid therapy of cystic craniopharyngiomas is investigated. Analytical calculations based on the Loevinger and the Berger formulae for electrons and photons, respectively, are compared with Monte Carlo simulations. The role of the material of which the colloid introduced inside the craniopharyngioma is made of as well as that forming the cyst wall is analyzed. It is foun…
▽ More
The dosimetry for radiocolloid therapy of cystic craniopharyngiomas is investigated. Analytical calculations based on the Loevinger and the Berger formulae for electrons and photons, respectively, are compared with Monte Carlo simulations. The role of the material of which the colloid introduced inside the craniopharyngioma is made of as well as that forming the cyst wall is analyzed. It is found that the analytical approaches provide a very good description of the simulated data in the conditions where they can be applied (i.e., in the case of a uniform and infinite homogeneous medium). However, the consideration of the different materials and interfaces produces a strong reduction of the dose delivered to the cyst wall in relation to that predicted by the Loevinger and the Berger formulae.
△ Less
Submitted 30 October, 2003;
originally announced October 2003.
