-
3D Microstructural and Strain Evolution During the Early Stages of Tensile Deformation
Authors:
Albert Zelenika,
Can Yildirim,
Carsten Detlefs,
Raquel Rodriguez-Lamas,
Flemming B. Grumsen,
Henning F. Poulsen,
Grethe Winther
Abstract:
Dislocation patterning and self-organization during plastic deformation are associated with work hardening, but the exact mechanisms remain elusive. This is partly because studies of the structure and local strain during the initial stages of plastic deformation has been a challenge. Here we use Dark Field X-ray Microscopy to generate 3D maps of embedded $350 \times 900 \times 72 \,μ\mathrm{m}^3$…
▽ More
Dislocation patterning and self-organization during plastic deformation are associated with work hardening, but the exact mechanisms remain elusive. This is partly because studies of the structure and local strain during the initial stages of plastic deformation has been a challenge. Here we use Dark Field X-ray Microscopy to generate 3D maps of embedded $350 \times 900 \times 72 \,μ\mathrm{m}^3$ volumes within three pure Al single crystals, all oriented for double slip on the primary and conjugate slip systems. These were tensile deformed by 0.6$\%$, 1.7$\%$ and 3.6$\%$, respectively. Orientation maps revealed the existence of two distinct types of planar dislocation boundaries both at 0.6$\%$ and 1.7$\%$ but no systematic patterning. At 3.6$\%$, these boundaries have evolved into a well-defined checkerboard pattern, characteristic of Geometrically Necessary Boundaries, GNBs. The GNB spacing is $\approx$ 14 $μ$m and the misorientation $\approx$ 0.2°, in fair agreement with those at higher strains. By contrast to the sharp boundaries observed at higher strains, the boundaries are associated with a sinusoidal orientation gradient. Maps of the elastic strain along the (111) direction exhibit fluctuations of $\pm 0.0002 $ with an average domain size of 3 $μ$m.
△ Less
Submitted 10 June, 2023;
originally announced June 2023.
-
High Resolution 3D Strain and Orientation Mapping within a Grain of a Directed Energy Deposition Laser Additively Manufactured Superalloy
Authors:
Y. Chen,
Y. T. Tang,
D. M. Collins,
S. J. Clark,
W. Ludwig,
R. Rodriguez-Lamas,
C. Detlefs,
R. C. Reed,
P. D. Lee,
P. J. Withers,
C. Yildirim
Abstract:
The industrialization of Laser Additive Manufacturing (LAM) is challenged by the undesirable microstructures and high residual stresses originating from the fast and complex solidification process. Non-destructive assessment of the mechanical performance controlling deformation patterning is therefore critical. Here, we use Dark Field X-ray Microscopy (DFXM) to non-destructively map the 3D intragr…
▽ More
The industrialization of Laser Additive Manufacturing (LAM) is challenged by the undesirable microstructures and high residual stresses originating from the fast and complex solidification process. Non-destructive assessment of the mechanical performance controlling deformation patterning is therefore critical. Here, we use Dark Field X-ray Microscopy (DFXM) to non-destructively map the 3D intragranular orientation and strain variations throughout a surface breaking grain within a directed energy deposition nickel superalloy. DFXM results reveal a highly heterogenous 3D microstructure in terms of the local orientation and lattice strain. The grain comprises $\approx$ 5$μ$m-sized cells with alternating strain states, as high as 5 $\times 10^{-3}$, and orientation differences <0.5° . The DFXM results are compared to Electron Backscatter Diffraction measurements of the same grain from its cut-off surface. We discuss the microstructure developments during LAM, rationalising the development of the deformation patterning from the extreme thermal gradients during processing and the susceptibility for solute segregation.
△ Less
Submitted 8 March, 2023;
originally announced March 2023.
-
darfix: Data analysis for dark-field X-ray microscopy
Authors:
Júlia Garriga Ferrer,
Raquel Rodríguez-Lamas,
Henri Payno,
Wout De Nolf,
Phil Cook,
Vicente Armando Solé Jover,
Vincent Favre-Nicolin,
Can Yıldırım,
Carsten Detlefs
Abstract:
A Python package for the analysis of dark-field X-ray microscopy (DFXM) and rocking curve imaging (RCI) data is presented. \textit{darfix} provides a set of data processing and visualization tools that can be either imported as library components or accessed through a graphical user interface (GUI) as an Orange add-on. In the latter case, the different analysis modules can be easily chained to def…
▽ More
A Python package for the analysis of dark-field X-ray microscopy (DFXM) and rocking curve imaging (RCI) data is presented. \textit{darfix} provides a set of data processing and visualization tools that can be either imported as library components or accessed through a graphical user interface (GUI) as an Orange add-on. In the latter case, the different analysis modules can be easily chained to define computational workflows. Operations on larger-than-memory image sets are supported through the implementation of online versions of the data processing algorithms, effectively trading performance for feasibility when the computing resources are limited. The software can automatically extract the relevant instrument angle settings from the input files metadata. The currently available input file format is EDF and in future releases HDF5 will be incorporated.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
