-
Super-droplet-repellent carbon-based printable perovskite solar cells
Authors:
Cuc Thi Kim Mai,
Janne Halme,
Heikki A. Nurmi,
Aldeliane M. da Silva,
Gabriela S. Lorite,
David Martineau,
Stéphanie Narbey,
Naeimeh Mozaffari,
Robin H. A. Ras,
Syed Ghufran Hashmi and,
Maja Vuckovac
Abstract:
Despite attractive cost-effectiveness, scalability, and superior stability, carbon-based printable perovskite solar cells (CPSCs) still face moisture-induced degradation that limits their lifespan and commercial potential. Here, we investigate the moisture-preventing mechanisms of thin nanostructured super-repellent coating (advancing contact angle $>$167$^{\circ}$ and contact angle hysteresis 7…
▽ More
Despite attractive cost-effectiveness, scalability, and superior stability, carbon-based printable perovskite solar cells (CPSCs) still face moisture-induced degradation that limits their lifespan and commercial potential. Here, we investigate the moisture-preventing mechanisms of thin nanostructured super-repellent coating (advancing contact angle $>$167$^{\circ}$ and contact angle hysteresis 7$^{\circ}$ integrated into CPSCs for different moisture forms (falling water droplets vs water vapor vs condensed water droplets). We show that unencapsulated super-repellent CPSCs have superior performance under continuous droplet impact for 12h (rain simulation experiments) compared to unencapsulated pristine (uncoated) CPSCs that degrade within seconds. Contrary to falling water droplets, where super-repellent coating serves as a shield, we found water vapor to physisorb through porous super-repellent coating (room temperature and relative humidity, RH 65\% and 85\%) that increased the CPSCs performance for 21\% during ~43 days similarly to pristine CPSCs. We further showed that, water condensation forms within or below the super-repellent coating (40$^{\circ}$ C and RH 85\%), followed by chemisorption and degradation of CPSCs. Because different forms of water have distinct effect on CPSC, we suggest that future standard tests for repellent CPSCs should include rain simulation and condensation tests. Our findings will thus inspire the development of super-repellent coatings for moisture prevention.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Flattened and wrinkled encapsulated droplets: Shape-morphing induced by gravity and evaporation
Authors:
Davide Riccobelli,
Hedar H. Al-Terke,
Päivi Laaksonen,
Pierangelo Metrangolo,
Arja Paananen,
Robin H. A. Ras,
Pasquale Ciarletta,
Dominic Vella
Abstract:
We report surprising morphological changes of suspension droplets (containing class II hydrophobin protein HFBI from Trichoderma reesei and water) as they evaporate with a contact line pinned on a rigid solid substrate. Both pendant and sessile droplets display the formation of an encapsulating elastic film as the bulk concentration of solute reaches a critical value during evaporation, but the mo…
▽ More
We report surprising morphological changes of suspension droplets (containing class II hydrophobin protein HFBI from Trichoderma reesei and water) as they evaporate with a contact line pinned on a rigid solid substrate. Both pendant and sessile droplets display the formation of an encapsulating elastic film as the bulk concentration of solute reaches a critical value during evaporation, but the morphology of the droplet varies significantly: for sessile droplets, the elastic film ultimately crumples in a nearly flattened area close to the apex while in pendant droplets, circumferential wrinkling occurs close to the contact line. These different morphologies are understood through a gravito-elasto-capillary model that predicts the droplet morphology and the onset of shape changes, as well as showing that the influence of the direction of gravity remains crucial even for very small droplets (where the effect of gravity can normally be neglected). The results pave the way to control droplet shape in several engineering and biomedical applications.
△ Less
Submitted 25 May, 2023; v1 submitted 1 December, 2022;
originally announced December 2022.
-
Ferrofluidic Manipulator: Automatic Manipulation of Non-magnetic Microparticles at Air-Ferrofluid Interface
Authors:
Zoran Cenev,
P. A. Diluka Harischandra,
Seppo Nurmi,
Mika Latikka,
Ville Hynninen,
Robin H. A. Ras,
Jaakko V. I. Timonen,
Quan Zhou
Abstract:
Manipulation of small-scale matter is a fundamental topic in micro- and nanorobotics. Numerous magnetic robotic systems have been developed for the manipulation of microparticles in an ambient environment, liquid as well as on the air-liquid interface. These systems move intrinsically magnetic or magnetically tagged objects by inducing a magnetic torque or force. However, most of the materials fou…
▽ More
Manipulation of small-scale matter is a fundamental topic in micro- and nanorobotics. Numerous magnetic robotic systems have been developed for the manipulation of microparticles in an ambient environment, liquid as well as on the air-liquid interface. These systems move intrinsically magnetic or magnetically tagged objects by inducing a magnetic torque or force. However, most of the materials found in nature are non-magnetic. Here, we report a ferrofluidic manipulator for automatic two-dimensional manipulation of non-magnetic objects floating on top of a ferrofluid. The manipulation system employs eight centimeter-scale solenoids, which can move non-magnetic particles by deforming the air-ferrofluid interface. Using linear programming, we can control the motion of the non-magnetic particles with a predefined trajectory of a line, square, and circle with a precision of 25.1+/-19.5 um, 34.4+/-28.4 um and 33.4+/-26.6 um, respectively. The ferrofluidic manipulator is versatile with the materials and the shapes of the objects under manipulation. We have successfully manipulated particles made of polyethylene, polystyrene, a silicon chip, and poppy and sesame seeds. This work shows a promising venue for the manipulation of living and non-living matter at the air-liquid interface.
△ Less
Submitted 18 May, 2021; v1 submitted 30 December, 2020;
originally announced January 2021.
-
Antifouling membranes for oily wastewater treatment: interplay between wetting and membrane fouling
Authors:
Shilin Huang,
Robin H. A. Ras,
Xuelin Tian
Abstract:
Oily wastewater is an extensive source of pollution to soil and water, and its harmless treatment is of great importance for the protection of our aquatic ecosystems. Membrane filtration is highly desirable for removing oil from oily water because it has the advantages of energy efficiency, easy processing and low maintenance cost. However, membrane fouling during filtration leads to severe flux d…
▽ More
Oily wastewater is an extensive source of pollution to soil and water, and its harmless treatment is of great importance for the protection of our aquatic ecosystems. Membrane filtration is highly desirable for removing oil from oily water because it has the advantages of energy efficiency, easy processing and low maintenance cost. However, membrane fouling during filtration leads to severe flux decline and impedes long-term operation of membranes in practical wastewater treatment. Membrane fouling includes reversible fouling and irreversible fouling. The fouling mechanisms have been explored based on classical fouling models, and on oil droplet behaviors (such as droplet deposition, accumulation, coalescence and wetting) on the membranes. Membrane fouling is dominated by droplet-membrane interaction, which is influenced by the properties of the membrane (e.g., surface chemistry, structure and charge) and the wastewater (e.g., compositions and concentrations) as well as the operation conditions. Typical membrane antifouling strategies, such as surface hydrophilization, zwitterionic polymer coating, photocatalytic decomposition and electrically enhanced antifouling are reviewed, and their cons and pros for practical applications are discussed.
△ Less
Submitted 12 October, 2018;
originally announced November 2018.
-
Wetting of ferrofluids: phenomena and control
Authors:
Mika Latikka,
Matilda Backholm,
Jaakko V. I. Timonen,
Robin H. A. Ras
Abstract:
Ferrofluids are liquids exhibiting remarkably strong response to magnetic fields, which leads to fascinating properties useful in various applications. Understanding the wetting properties and spreading of ferrofluids is important for their use in microfluidics and magnetic actuation. However, this is challenging as magnetically induced deformation of the ferrofluid surface can affect contact angl…
▽ More
Ferrofluids are liquids exhibiting remarkably strong response to magnetic fields, which leads to fascinating properties useful in various applications. Understanding the wetting properties and spreading of ferrofluids is important for their use in microfluidics and magnetic actuation. However, this is challenging as magnetically induced deformation of the ferrofluid surface can affect contact angles, which are commonly used to characterize wetting properties in other systems. In addition, interaction of the magnetic nanoparticles and solid surface at nanoscale can have surprising effects on ferrofluid spreading. In this review we discuss these issues with focus on interpretation of ferrofluid contact angles. We review recent literature examining ferrofluid wetting phenomena and outline novel wetting related ferrofluid applications. To better understand wetting of ferrofluids, more careful experimental work is needed.
△ Less
Submitted 12 October, 2018;
originally announced October 2018.
-
Ferromagnetic resonance in $ε$-Co magnetic composites
Authors:
Khattiya Chalapat,
Jaakko V. I. Timonen,
Maija Huuppola,
Lari Koponen,
Christoffer Johans,
Robin H. A. Ras,
Olli Ikkala,
Markku A. Oksanen,
Eira Seppälä,
G. S. Paraoanu
Abstract:
We investigate the electromagnetic properties of assemblies of nanoscale $ε$-cobalt crystals with size range between 5 nm to 35 nm, embedded in a polystyrene (PS) matrix, at microwave (1-12 GHz) frequencies. We investigate the samples by transmission electron microscopy (TEM) imaging, demonstrating that the particles aggregate and form chains and clusters. By using a broadband coaxial-line method,…
▽ More
We investigate the electromagnetic properties of assemblies of nanoscale $ε$-cobalt crystals with size range between 5 nm to 35 nm, embedded in a polystyrene (PS) matrix, at microwave (1-12 GHz) frequencies. We investigate the samples by transmission electron microscopy (TEM) imaging, demonstrating that the particles aggregate and form chains and clusters. By using a broadband coaxial-line method, we extract the magnetic permeability in the frequency range from 1 to 12 GHz, and we study the shift of the ferromagnetic resonance with respect to an externally applied magnetic field. We find that the zero-magnetic field ferromagnetic resonant peak shifts towards higher frequencies at finite magnetic fields, and the magnitude of complex permeability is reduced. At fields larger than 2.5 kOe the resonant frequency changes linearly with the applied magnetic field, demonstrating the transition to a state in which the nanoparticles become dynamically decoupled. In this regime, the particles inside clusters can be treated as non-interacting, and the peak position can be predicted from Kittel's ferromagnetic resonance theory for non-interacting uniaxial spherical particles combined with the Landau-Lifshitz-Gilbert (LLG) equation. In contrast, at low magnetic fields this magnetic order breaks down and the resonant frequency in zero magnetic field reaches a saturation value reflecting the interparticle interactions as resulting from aggregation. Our results show that the electromagnetic properties of these composite materials can be tuned by external magnetic fields and by changes in the aggregation structure.
△ Less
Submitted 6 November, 2014; v1 submitted 17 October, 2014;
originally announced October 2014.
-
Magnetic nanocomposites at microwave frequencies
Authors:
J. V. I. Timonen,
R. H. A. Ras,
O. Ikkala,
M. Oksanen,
E. Seppala,
K. Chalapat,
J. Li,
G. S. Paraoanu
Abstract:
Most conventional magnetic materials used in the electronic devices are ferrites, which are composed of micrometer-size grains. But ferrites have small saturation magnetization, therefore the performance at GHz frequencies is rather poor. That is why functionalized nanocomposites comprising magnetic nanoparticles (e.g. Fe, Co) with dimensions ranging from a few nm to 100 nm, and embedded in dielec…
▽ More
Most conventional magnetic materials used in the electronic devices are ferrites, which are composed of micrometer-size grains. But ferrites have small saturation magnetization, therefore the performance at GHz frequencies is rather poor. That is why functionalized nanocomposites comprising magnetic nanoparticles (e.g. Fe, Co) with dimensions ranging from a few nm to 100 nm, and embedded in dielectric matrices (e.g. silicon oxide, aluminium oxide) have a significant potential for the electronics industry. When the size of the nanoparticles is smaller than the critical size for multidomain formation, these nanocomposites can be regarded as an ensemble of particles in single-domain states and the losses (due for example to eddy currents) are expected to be relatively small. Here we review the theory of magnetism in such materials, and we present a novel measurement method used for the characterization of the electromagnetic properties of composites with nanomagnetic insertions. We also present a few experimental results obtained on composites consisting of iron nanoparticles in a dielectric matrix.
△ Less
Submitted 8 April, 2011;
originally announced April 2011.
