-
Relative permeability as a stationary process: energy fluctuations in immiscible displacement
Authors:
James E. McClure,
Ming Fan,
Steffen Berg,
Ryan T. Armstrong,
Carl Fredrik Berg,
Zhe Li,
Thomas Ramstad
Abstract:
Relative permeability is commonly used to model immiscible fluid flow through porous materials. In this work we derive the relative permeability relationship from conservation of energy, assuming that the system to be non-ergodic at large length scales and relying on averaging in both space and time to homogenize the behavior. Explicit criteria are obtained to define stationary conditions: (1) the…
▽ More
Relative permeability is commonly used to model immiscible fluid flow through porous materials. In this work we derive the relative permeability relationship from conservation of energy, assuming that the system to be non-ergodic at large length scales and relying on averaging in both space and time to homogenize the behavior. Explicit criteria are obtained to define stationary conditions: (1) there can be no net change for extensive measures of the system state over the time averaging interval; (2) the net energy inputs into the system are zero, meaning that the net rate of work done on the system must balance with the heat removed; and (3) there is no net work performed due to the contribution of internal energy fluctuations. Results are then evaluated based on direct numerical simulation. Dynamic connectivity is observed during steady-state flow, which is quantitatively assessed based the Euler characteristic. We show that even during steady-state flow at low capillary number ($\mathsf{Ca}\sim1\times10^5$), typical flow processes will explore multiple connectivity states. The residence time for each connectivity state is captured based on the time-and-space average. The distribution for energy fluctuations is shown to be multi-modal and non-Gaussian when terms are considered independently. However, we demonstrate that their sum is zero. Given an appropriate choice of the thermodynamic driving force, we show that the conventional relative permeability relationship is sufficient to model the energy dissipation in systems with complex pore-scale dynamics that routinely alter the structure of fluid connected pathways.
△ Less
Submitted 2 July, 2022;
originally announced July 2022.
-
The LBPM software package for simulating multiphase flow on digital images of porous rocks
Authors:
James E. McClure,
Zhe Li,
Mark Berrill,
Thomas Ramstad
Abstract:
Direct pore scale simulations of two-fluid flow on digital rock images provide a promising tool to understand the role of surface wetting phenomena on flow and transport in geologic reservoirs. We present computational protocols that mimic conventional special core analysis laboratory (SCAL) experiments, which are implemented within the open source LBPM software package. Protocols are described to…
▽ More
Direct pore scale simulations of two-fluid flow on digital rock images provide a promising tool to understand the role of surface wetting phenomena on flow and transport in geologic reservoirs. We present computational protocols that mimic conventional special core analysis laboratory (SCAL) experiments, which are implemented within the open source LBPM software package. Protocols are described to simulate unsteady displacement, steady-state flow at fixed saturation, and to mimic centrifuge experiments. These methods can be used to infer relative permeability and capillary curves, and otherwise understand two-fluid flow behavior based on first principles. Morphological tools are applied to assess image resolution, establish initial conditions, and instantiate surface wetting maps based on the distribution of fluids. Internal analysis tools are described that measure essential aspects of two-fluid flow, including fluid connectivity and surface measures, which are used to track transient aspects of the flow behavior as they occur during simulation. Computationally efficient workflows are developed by combining these components with a two-fluid lattice Boltzmann model to define hybrid methods that can accelerate computations by using morphological tools to incrementally evolve the pore-scale fluid distribution. We show that the described methods can be applied to recover expected trends due to the surface wetting properties based on flow simulation in Benntheimer sandstone.
△ Less
Submitted 13 July, 2020;
originally announced July 2020.
-
Zero-Delay Joint Source-Channel Coding for a Multivariate Gaussian on a Gaussian MAC
Authors:
Pål Anders Floor,
Anna N. Kim,
Tor A. Ramstad,
Ilangko Balasingham,
Niklas Wernersson,
Mikael Skoglund
Abstract:
In this paper, communication of a Multivariate Gaussian over a Gaussian Multiple Access Channel is studied. Distributed zero-delay joint source-channel coding (JSCC) solutions to the problem are given. Both nonlinear and linear approaches are discussed. The performance upper bound (signal-to-distortion ratio) for arbitrary code length is also derived and Zero-delay cooperative JSCC is briefly addr…
▽ More
In this paper, communication of a Multivariate Gaussian over a Gaussian Multiple Access Channel is studied. Distributed zero-delay joint source-channel coding (JSCC) solutions to the problem are given. Both nonlinear and linear approaches are discussed. The performance upper bound (signal-to-distortion ratio) for arbitrary code length is also derived and Zero-delay cooperative JSCC is briefly addressed in order to provide an approximate bound on the performance of zero-delay schemes. The main contribution is a nonlinear hybrid discrete-analog JSSC scheme based on distributed quantization and a linear continuous mapping named Distributed Quantizer Linear Coder (DQLC). The DQLC has promising performance which improves with increasing correlation, and is robust against variations in noise level. The DQLC exhibits a constant gap to the performance upper bound as the signal-to-noise ratio (SNR) becomes large for any number of sources and values of correlation. Therefore it outperforms a linear solution (uncoded transmission) in any case when the SNR gets sufficiently large.
△ Less
Submitted 11 January, 2014;
originally announced January 2014.
-
On Zero Delay Source-Channel Coding
Authors:
Emrah Akyol,
Kumar Viswanatha,
Kenneth Rose,
Tor Ramstad
Abstract:
In this paper, we study the zero-delay source-channel coding problem, and specifically the problem of obtaining the vector transformations that optimally map between the m-dimensional source space and the k-dimensional channel space, under a given transmission power constraint and for the mean square error distortion. We first study the functional properties of this problem and show that the objec…
▽ More
In this paper, we study the zero-delay source-channel coding problem, and specifically the problem of obtaining the vector transformations that optimally map between the m-dimensional source space and the k-dimensional channel space, under a given transmission power constraint and for the mean square error distortion. We first study the functional properties of this problem and show that the objective is concave in the source and noise densities and convex in the density of the input to the channel. We then derive the necessary conditions for optimality of the encoder and decoder mappings. A well known result in information theory pertains to the linearity of optimal encoding and decoding mappings in the scalar Gaussian source and channel setting, at all channel signal-to-noise ratios (CSNRs). In this paper, we study this result more generally, beyond the Gaussian source and channel, and derive the necessary and sufficient condition for linearity of optimal mappings, given a noise (or source) distribution, and a specified power constraint. We also prove that the Gaussian source-channel pair is unique in the sense that it is the only source-channel pair for which the optimal mappings are linear at more than one CSNR values. Moreover, we show the asymptotic linearity of optimal mappings for low CSNR if the channel is Gaussian regardless of the source and, at the other extreme, for high CSNR if the source is Gaussian, regardless of the channel. Our numerical results show strict improvement over prior methods. The numerical approach is extended to the scenario of source-channel coding with decoder side information. The resulting encoding mappings are shown to be continuous relatives of, and in fact subsume as special case, the Wyner-Ziv mappings encountered in digital distributed source coding systems.
△ Less
Submitted 14 February, 2013;
originally announced February 2013.
-
Zero-Delay Joint Source-Channel Coding for a Bivariate Gaussian on a Gaussian MAC
Authors:
Paal Anders Floor,
Anna N. Kim,
Niklas Wernersson,
Tor A. Ramstad,
Mikael Skoglund,
Ilangko Balasingham
Abstract:
In this paper, delay-free, low complexity, joint source-channel coding (JSCC) for transmission of two correlated Gaussian memoryless sources over a Gaussian Multiple Access Channel (GMAC) is considered. The main contributions of the paper are two distributed JSCC schemes: one discrete scheme based on nested scalar quantization, and one hybrid discrete-analog scheme based on a scalar quantizer and…
▽ More
In this paper, delay-free, low complexity, joint source-channel coding (JSCC) for transmission of two correlated Gaussian memoryless sources over a Gaussian Multiple Access Channel (GMAC) is considered. The main contributions of the paper are two distributed JSCC schemes: one discrete scheme based on nested scalar quantization, and one hybrid discrete-analog scheme based on a scalar quantizer and a linear continuous mapping. The proposed schemes show promising performance which improve with increasing correlation and are robust against variations in noise level. Both schemes exhibit a constant gap to the performance upper bound when the channel signal-to-noise ratio gets large.
△ Less
Submitted 3 April, 2012; v1 submitted 29 January, 2011;
originally announced January 2011.
-
Shannon-Kotel'nikov Mappings for Analog Point-to-Point Communications
Authors:
Pål Anders Floor,
Tor A. Ramstad
Abstract:
In this paper an approach to joint source-channel coding (JSCC) named Shannon-Kotel'nikov mappings (S-K mappings) is presented. S-K mappings are continuous, or piecewise continuous direct source-to-channel mappings operating directly on amplitude continuous and discrete time signals. Such mappings include several existing JSCC schemes as special cases. Many existing approaches to analog- or hybrid…
▽ More
In this paper an approach to joint source-channel coding (JSCC) named Shannon-Kotel'nikov mappings (S-K mappings) is presented. S-K mappings are continuous, or piecewise continuous direct source-to-channel mappings operating directly on amplitude continuous and discrete time signals. Such mappings include several existing JSCC schemes as special cases. Many existing approaches to analog- or hybrid discrete analog JSCC provide both excellent performance as well as robustness to variations in noise level. This at low delay and relatively low complexity. However, a theory explaining their performance and behaviour on a general basis, as well as guidelines on how to construct close to optimal mappings in general, does not currently exist. Therefore, such mappings are often found based on educated guesses inspired of configurations that are known in advance to produce good solutions, combination of already existing mappings, numerical optimization or machine learning methods. The objective of this paper is to introduce a theoretical framework for analysis of analog- or hybrid discrete analog S-K mappings. This framework will enable calculation of distortion when applying such schemes on point-to-point links, reveal more about their fundamental nature, and provide guidelines on how they should be constructed in order to perform well at both low and arbitrary complexity and delay. Such guidelines will likely help constrain solutions to numerical approaches and help explain why machine learning approaches finds the solutions they do. This task is difficult and we do not provide a complete framework at this stage: We focus on high SNR and memoryless sources with an arbitrary continuous unimodal density function and memoryless Gaussian channels. We also provide example of mappings based on surfaces which are chosen based on the provided theory.
△ Less
Submitted 20 March, 2022; v1 submitted 9 April, 2009;
originally announced April 2009.
-
Capillary-Driven Instability of Immiscible Fluid Interfaces Flowing in Parallel in Porous Media
Authors:
Thomas Ramstad,
Alex Hansen
Abstract:
When immiscible wetting and non-wetting fluids move in parallel in a porous medium, an instability may occur at sufficiently high capillary numbers so that interfaces between the fluids initially held in place by the porous medium are mobilized. A boundary zone containing bubbles of both fluids evolve which has a well defined thickness. This zone moves at constant average speed towards the non-w…
▽ More
When immiscible wetting and non-wetting fluids move in parallel in a porous medium, an instability may occur at sufficiently high capillary numbers so that interfaces between the fluids initially held in place by the porous medium are mobilized. A boundary zone containing bubbles of both fluids evolve which has a well defined thickness. This zone moves at constant average speed towards the non-wetting fluid. A diffusive current of bubbles of non-wetting fluid into the wetting fluid is set up.
△ Less
Submitted 4 June, 2008; v1 submitted 20 September, 2007;
originally announced September 2007.
-
Cluster evolution in steady-state two-phase flow in porous media
Authors:
Thomas Ramstad,
Alex Hansen
Abstract:
We report numerical studies of the cluster development of two-phase flow in a steady-state environment of porous media. This is done by including biperiodic boundary conditions in a two-dimensional flow simulator. Initial transients of wetting and non-wetting phases that evolve before steady-state has occurred, undergo a cross-over where every initial patterns are broken up. For flow dominated b…
▽ More
We report numerical studies of the cluster development of two-phase flow in a steady-state environment of porous media. This is done by including biperiodic boundary conditions in a two-dimensional flow simulator. Initial transients of wetting and non-wetting phases that evolve before steady-state has occurred, undergo a cross-over where every initial patterns are broken up. For flow dominated by capillary effects with capillary numbers in order of $10^{-5}$, we find that around a critical saturation of non-wetting fluid the non-wetting clusters of size $s$ have a power-law distribution $n_s \sim s^{-τ}$ with the exponent $τ= 1.92 \pm 0.04$ for large clusters. This is a lower value than the result for ordinary percolation. We also present scaling relation and time evolution of the structure and global pressure.
△ Less
Submitted 5 January, 2006; v1 submitted 24 November, 2005;
originally announced November 2005.
-
Self-Affinity in the Gradient Percolation Problem
Authors:
Alex Hansen,
G. George Batrouni,
Thomas Ramstad,
Jean Schmittbuhl
Abstract:
We study the scaling properties of the solid-on-solid front of the infinite cluster in two-dimensional gradient percolation. We show that such an object is self affine with a Hurst exponent equal to 2/3 up to a cutoff-length proportional to the gradient to the power (-4/7). Beyond this length scale, the front position has the character of uncorrelated noise. Importantly, the self-affine behavior…
▽ More
We study the scaling properties of the solid-on-solid front of the infinite cluster in two-dimensional gradient percolation. We show that such an object is self affine with a Hurst exponent equal to 2/3 up to a cutoff-length proportional to the gradient to the power (-4/7). Beyond this length scale, the front position has the character of uncorrelated noise. Importantly, the self-affine behavior is robust even after removing local jumps of the front. The previously observed multi affinity, is due to the dominance of overhangs at small distances in the structure function. This is a crossover effect.
△ Less
Submitted 19 July, 2006; v1 submitted 22 November, 2005;
originally announced November 2005.
-
Fracture Roughness and Correlation Length in the Central Force Model
Authors:
Jan Øystein Haavig Bakke,
Thomas Ramstad,
Alex Hansen
Abstract:
We measure the roughness exponent and the correlation length exponent of a stress-weighted percolation process in the central force model in 2D. The roughness exponent is found to be zeta = 0.75 \pm 0.03 and the correlation length exponent is found to be nu = 1.7 \pm 0.3. This result supports a conjecture that the fracture roughness for large scales is controlled by a stress weighted percolation…
▽ More
We measure the roughness exponent and the correlation length exponent of a stress-weighted percolation process in the central force model in 2D. The roughness exponent is found to be zeta = 0.75 \pm 0.03 and the correlation length exponent is found to be nu = 1.7 \pm 0.3. This result supports a conjecture that the fracture roughness for large scales is controlled by a stress weighted percolation process, and the fracture roughness can by calculated from the correlation length exponent by zeta = 2*nu/(1+2*nu). We also compare global and local measurements of the fracture roughness and do not find sign of anomalous scaling in the central force model.
△ Less
Submitted 26 July, 2005;
originally announced July 2005.
-
Correlation Length Exponent in the Three-Dimensional Fuse Network
Authors:
Thomas Ramstad,
Jan O. H. Bakke,
Johannes Bjelland,
Torunn Stranden,
Alex Hansen
Abstract:
We present numerical measurements of the critical correlation length exponent nu in the three-dimensional fuse model. Using sufficiently broad threshold distributions to ensure that the system is the strong-disorder regime, we determine nu to be nu = 0.86 +/- 0.06 based on analyzing the fluctuations of the survival probability. The value we find for nu is very close to the percolation value 0.88…
▽ More
We present numerical measurements of the critical correlation length exponent nu in the three-dimensional fuse model. Using sufficiently broad threshold distributions to ensure that the system is the strong-disorder regime, we determine nu to be nu = 0.86 +/- 0.06 based on analyzing the fluctuations of the survival probability. The value we find for nu is very close to the percolation value 0.88 and we propose that the three-dimensional fuse model is in the universality class of ordinary percolation.
△ Less
Submitted 26 November, 2003;
originally announced November 2003.
