-
Detection of the Geminga pulsar at energies down to 20 GeV with the LST-1 of CTAO
Authors:
The CTAO-LST Project,
:,
K. Abe,
S. Abe,
A. Abhishek,
F. Acero,
A. Aguasca-Cabot,
I. Agudo,
C. Alispach,
D. Ambrosino,
F. Ambrosino,
L. A. Antonelli,
C. Aramo,
A. Arbet-Engels,
C. Arcaro,
T. T. H. Arnesen,
K. Asano,
P. Aubert,
A. Baktash,
M. Balbo,
A. Bamba,
A. Baquero Larriva,
U. Barres de Almeida,
J. A. Barrio,
L. Barrios Jiménez
, et al. (309 additional authors not shown)
Abstract:
Geminga is the third gamma-ray pulsar firmly detected by imaging atmospheric Cherenkov telescopes (IACTs) after the Crab and the Vela pulsars. Most of its emission is expected at tens of GeV, and, out of the planned telescopes of the upcoming Cherenkov Telescope Array Observatory (CTAO), the Large-Sized Telescopes (LSTs) are the only ones with optimised sensitivity at these energies. We aim to cha…
▽ More
Geminga is the third gamma-ray pulsar firmly detected by imaging atmospheric Cherenkov telescopes (IACTs) after the Crab and the Vela pulsars. Most of its emission is expected at tens of GeV, and, out of the planned telescopes of the upcoming Cherenkov Telescope Array Observatory (CTAO), the Large-Sized Telescopes (LSTs) are the only ones with optimised sensitivity at these energies. We aim to characterise the gamma-ray pulse shape and spectrum of Geminga as observed by the first LST (hereafter LST-1) of the CTAO-North. Furthermore, this study confirms the great performance and the improved energy threshold of the telescope, as low as 10 GeV for pulsar analysis, with respect to current-generation Cherenkov telescopes. We analysed 60 hours of good-quality data taken by the LST-1 at zenith angles below 50$^\circ$. Additionally, a new Fermi-LAT analysis of 16.6 years of data was carried out to extend the spectral analysis down to 100 MeV. Lastly, a detailed study of the systematic effects was performed. We report the detection of Geminga in the energy range between 20 and 65 GeV. Of the two peaks of the phaseogram, the second one, P2, is detected with a significance of 12.2$σ$, while the first (P1) reaches a significance level of 2.6$σ$. The best-fit model for the spectrum of P2 was found to be a power law with $Γ= (4.5 \pm 0.4_{stat})^{+0.2_{sys}}_{-0.6_{sys}}$, compatible with the previous results obtained by the MAGIC. No evidence of curvature is found in the LST-1 energy range. The joint fit with Fermi data confirms a preference for a sub-exponential cut-off over a pure exponential, even though both models fail to reproduce the data above several tens of GeV. The overall results presented in this paper prove that the LST-1 is an excellent telescope for the observation of pulsars, and improved sensitivity is expected to be achieved with the full CTAO-North.
△ Less
Submitted 27 May, 2025;
originally announced May 2025.
-
About identifiability and observability for a class of dynamical systems
Authors:
Alicja B Kubik,
Alain Rapaport,
Benjamin Ivorra,
Ángel M Ramos
Abstract:
In this note, we propose a novel approach for a class of autonomous dynamical systems that allows, given some observations of the solutions, to identify its parameters and reconstruct the state vector. This approach relies on proving the linear independence between some functions depending on the observations and its derivatives. In particular, we show that, in some cases, only low-order derivativ…
▽ More
In this note, we propose a novel approach for a class of autonomous dynamical systems that allows, given some observations of the solutions, to identify its parameters and reconstruct the state vector. This approach relies on proving the linear independence between some functions depending on the observations and its derivatives. In particular, we show that, in some cases, only low-order derivatives are necessary, opposed to classical approaches that need more derivation. We also provide different constructive procedures to retrieve the unknowns, which are based on the resolution of some linear systems. Moreover, under some analytic conditions, these unknowns may be retrieved with very few data. We finally apply this approach to some illustrative examples.
△ Less
Submitted 21 August, 2024;
originally announced August 2024.
-
Charge transport modelling of lithium ion batteries
Authors:
Giles W Richardson,
Jamie M Foster,
Rahifa Ranom,
Colin P Please,
Angel M Ramos
Abstract:
This paper presents the current state of mathematical modelling of the electrochemical behaviour of lithium-ion batteries as they are charged and discharged. It reviews the models developed by Newman and co-workers, both in the cases of dilute and moderately-concentrated electrolytes and indicates the modelling assumptions required for their development. Particular attention is paid to the interfa…
▽ More
This paper presents the current state of mathematical modelling of the electrochemical behaviour of lithium-ion batteries as they are charged and discharged. It reviews the models developed by Newman and co-workers, both in the cases of dilute and moderately-concentrated electrolytes and indicates the modelling assumptions required for their development. Particular attention is paid to the interface conditions imposed between the electrolyte and the active electrode material; necessary conditions are derived for one of these, the Butler-Volmer relation, in order to ensure physically realistic solutions. Insight into the origin of the differences between various models found in the literature is revealed by considering formulations obtained by using different measures of the electric potential. Materials commonly used for electrodes in lithium ion batteries are considered and the various mathematical models used to describe lithium transport in them discussed. The problem of up-scaling from models of behaviour at the single electrode particle scale to the cell scale is addressed using homogenisation techniques resulting in the pseudo 2D model commonly used to describe charge transport and discharge behaviour in lithium-ion cells. Numerical solution to this model is discussed and illustrative results for a common device are computed.
△ Less
Submitted 14 January, 2020;
originally announced February 2020.
-
Nash equilibria strategies and equivalent single-objective optimization problems. The case of linear partial differential equations
Authors:
Angel Manuel Ramos
Abstract:
In this paper we study the existence and uniqueness of Nash equilibria (solution to competition-wise problems, with several controls trying to reach possibly different goals) associated to linear partial differential equations and show that, in some cases, they are also the solution of suitable single-objective optimization problems (i.e. cooperative-wise problems, where all the controls cooperate…
▽ More
In this paper we study the existence and uniqueness of Nash equilibria (solution to competition-wise problems, with several controls trying to reach possibly different goals) associated to linear partial differential equations and show that, in some cases, they are also the solution of suitable single-objective optimization problems (i.e. cooperative-wise problems, where all the controls cooperate to reach a common goal). We use cost functions associated with a particular linear parabolic partial differential equations and distributed controls, but the results are also valid for more general linear differential equations (including elliptic and hyperbolic cases) and controls (e.g. boundary controls, initial value controls,...).
△ Less
Submitted 30 August, 2019;
originally announced August 2019.
-
On the well-posedness of a multiscale mathematical model for Lithium-ion batteries
Authors:
Jesús Ildefonso Díaz,
David Gómez-Castro,
Angel Manuel Ramos
Abstract:
We consider the mathematical treatment of a system of nonlinear partial differential equations based on a model, proposed in 1972 by J. Newman, in which the coupling between the Lithium concentration, the phase potentials and temperature in the electrodes and the electrolyte of a Lithium battery cell is considered. After introducing some functional spaces well-adapted to our framework we obtain so…
▽ More
We consider the mathematical treatment of a system of nonlinear partial differential equations based on a model, proposed in 1972 by J. Newman, in which the coupling between the Lithium concentration, the phase potentials and temperature in the electrodes and the electrolyte of a Lithium battery cell is considered. After introducing some functional spaces well-adapted to our framework we obtain some rigorous results showing the well-posedness of the system, first for some short time and then, by considering some hypothesis on the nonlinearities, globally in time. As far as we know, this is the first result in the literature proving existence in time of the full Newman model, which follows previous results by the third author in 2016 regarding a simplified case.
△ Less
Submitted 18 February, 2018;
originally announced February 2018.
-
On the well-posedness of a mathematical model for Lithium-ion batteries
Authors:
Angel Manuel Ramos
Abstract:
In this article we discuss the well-posedness of a mathematical model that is used in the literature for the simulation of Lithium-ion (Li-ion) batteries. First, a mathematical model based on a macro-homogeneous approach is presented, following previous works. Then it is showed, from a physical and a mathematical point of view, that a boundary condition widely used in the literature is not correct…
▽ More
In this article we discuss the well-posedness of a mathematical model that is used in the literature for the simulation of Lithium-ion (Li-ion) batteries. First, a mathematical model based on a macro-homogeneous approach is presented, following previous works. Then it is showed, from a physical and a mathematical point of view, that a boundary condition widely used in the literature is not correct. Although these errors could be just sign typos (that can be explained as carelessness over d/d$x$ versus d/d$n$, with $n$ the outward unit vector) and authors using this model probably use the correct boundary condition when they solve it in order to do simulations, readers should be aware of the right choice. Therefore, the deduction of the correct boundary condition and a mathematical study of the well-posedness of the corresponding problem is carried out here.
△ Less
Submitted 29 May, 2015;
originally announced June 2015.
-
Some comments on the Butler-Volmer equation for modeling Lithium-ion batteries
Authors:
A. M. Ramos,
C. P. Please
Abstract:
In this article the Butler-Volmer equation used in describing Lithium-ion (Li-ion) batteries is discussed. First, a complete mathematical model based on a macro-homogeneous approach developed by Neuman is presented. Two common mistakes found in the literature regarding a sign in a boundary conditions and the use of the transfer coefficient are mentioned. The paper focuses on the form of the Butler…
▽ More
In this article the Butler-Volmer equation used in describing Lithium-ion (Li-ion) batteries is discussed. First, a complete mathematical model based on a macro-homogeneous approach developed by Neuman is presented. Two common mistakes found in the literature regarding a sign in a boundary conditions and the use of the transfer coefficient are mentioned. The paper focuses on the form of the Butler-Volmer equation in the model. It is shown how practical problems can be avoided by taking care in the form used, particularly to avoid difficulties when the solid particle in the electrodes approaches a fully charged or discharged state or the electrolyte gets depleted. This shows that the open circuit voltage and the exchange current density must depend on the lithium concentration in both the solid and the electrolyte in a particular way at the extremes of the concentration ranges.
△ Less
Submitted 19 March, 2015;
originally announced March 2015.
-
Sensitivity analysis and study of the mixing uniformity of a microfluidic mixer
Authors:
Benjamin Ivorra,
Juana López Redondo,
Ángel M. Ramos,
Juan G. Santiago
Abstract:
We consider a microfluidic mixer based on hydrodynamic focusing, which is used to initiate the folding process of individual proteins. The folding process is initiated by quickly diluting a local denaturant concentration, and we define mixing time as the time advecting proteins experience a specified to achieve a local drop in denaturant concentration. In previous work, we presented a minimization…
▽ More
We consider a microfluidic mixer based on hydrodynamic focusing, which is used to initiate the folding process of individual proteins. The folding process is initiated by quickly diluting a local denaturant concentration, and we define mixing time as the time advecting proteins experience a specified to achieve a local drop in denaturant concentration. In previous work, we presented a minimization of mixing time which considered optimal geometry and flow conditions, and achieved a design with a predicted mixing time of 0.10 $μ$s. The aim of the current paper is twofold. First, we explore the sensitivity of mixing time to key geometric and flow parameters. In particular, we study the angle between inlets, the shape of the channel intersections, channel widths, mixer depth, mixer symmetry, inlet velocities, working fluid physical properties, and denaturant concentration thresholds. Second, we analyze the uniformity of mixing times as a function of inlet flow streamlines. We find the shape of the intersection, channel width, inlet velocity ratio, and asymmetries have strong effects on mixing time; while inlet angles, mixer depth, fluid properties, and concentration thresholds have weaker effects. Also, the uniformity of the mixing time is preserved for most of the inlet flow and distances of down to within about 0.4 $μ$m of the mixer wall. We offer these analyses of sensitivities to imperfections in mixer geometry and flow conditions as a guide to experimental efforts which aim to fabricate and use these types of mixers. Our study also highlights key issues and provides a guide to the optimization and practical design of other microfluidic devices dependent on both geometry and flow conditions.
△ Less
Submitted 29 January, 2015;
originally announced January 2015.
-
Be-CoDiS: A mathematical model to predict the risk of human diseases spread between countries. Validation and application to the 2014-15 Ebola Virus Disease epidemic
Authors:
Benjamin Ivorra,
Diène Ngom,
Ángel Manuel Ramos
Abstract:
Ebola virus disease is a lethal human and primate disease that currently requires a particular attention from the international health authorities due to important outbreaks in some Western African countries and isolated cases in the United Kingdom, the USA and Spain. Regarding the emergency of this situation, there is a need of development of decision tools, such as mathematical models, to assist…
▽ More
Ebola virus disease is a lethal human and primate disease that currently requires a particular attention from the international health authorities due to important outbreaks in some Western African countries and isolated cases in the United Kingdom, the USA and Spain. Regarding the emergency of this situation, there is a need of development of decision tools, such as mathematical models, to assist the authorities to focus their efforts in important factors to eradicate Ebola. In this work, we propose a novel deterministic spatial-temporal model, called Be-CoDiS (Between-Countries Disease Spread), to study the evolution of human diseases within and between countries. The main interesting characteristics of Be-CoDiS are the consideration of the movement of people between countries, the control measure effects and the use of time dependent coefficients adapted to each country. First, we focus on the mathematical formulation of each component of the model and explain how its parameters and inputs are obtained. Then, in order to validate our approach, we consider two numerical experiments regarding the 2014-15 Ebola epidemic. The first one studies the ability of the model in predicting the EVD evolution between countries starting from the index cases in Guinea in December 2013. The second one consists of forecasting the evolution of the epidemic by using some recent data. The results obtained with Be-CoDiS are compared to real data and other models outputs found in the literature. Finally, a brief parameter sensitivity analysis is done. A free Matlab version of Be-CoDiS is available at: http://www.mat.ucm.es/momat/software.htm
△ Less
Submitted 12 May, 2015; v1 submitted 22 October, 2014;
originally announced October 2014.
-
Existence and Uniqueness of Solution of a Continuous Flow Bioreactor Model with Two Species
Authors:
M. Crespo,
B. Ivorra,
A. M Ramos
Abstract:
In this work, we study the mathematical analysis of a coupled system of two reaction-diffusion-advection equations and Danckwerts boundary conditions, which models the interaction between a microbial population (e.g., bacterias) and a diluted substrate (e.g., nitrate) in a continuous flow bioreactor. This type of bioreactor can be used, for instance, for water treatment. First, we prove the existe…
▽ More
In this work, we study the mathematical analysis of a coupled system of two reaction-diffusion-advection equations and Danckwerts boundary conditions, which models the interaction between a microbial population (e.g., bacterias) and a diluted substrate (e.g., nitrate) in a continuous flow bioreactor. This type of bioreactor can be used, for instance, for water treatment. First, we prove the existence and uniqueness of solution, under the hypothesis of linear reaction by using classical results for linear parabolic boundary value problems. Next, we prove the existence and uniqueness of solution for some nonlinear reactions by applying \textit{Schauder Fixed Point Theorem} and the theorem obtained for the linear case. Results about the nonnegativeness and boundedness of the solution are also proved here.
△ Less
Submitted 2 July, 2015; v1 submitted 17 October, 2014;
originally announced October 2014.
-
Energy resolution and energy-light response of CsI(TI) scintillators for charged particle detection
Authors:
A. Wagner,
W. P. Tan,
K. Chalut,
R. J. Charity,
B. Davin,
Y. Larochelle,
M. D. Lennek,
T. X. Liu,
W. G. Lynch,
A. M. Ramos,
R. Shomin,
L. G. Sobotka,
R. T. de Souza,
M. B. Tsang,
G. Verde,
H. S. Xu
Abstract:
This article describes the crystal selection and quality control utilized to develop and calibrate a high resolution array of CsI(TI) scintillator crystals for the detection of energetic charged particles. Alpha sources are used to test the light output variation due to thallium doping gradients. Selection of crystals with better than 1% non-uniformity in light output is accomplished using this…
▽ More
This article describes the crystal selection and quality control utilized to develop and calibrate a high resolution array of CsI(TI) scintillator crystals for the detection of energetic charged particles. Alpha sources are used to test the light output variation due to thallium doping gradients. Selection of crystals with better than 1% non-uniformity in light output is accomplished using this method. Tests with 240 MeV alpha beam reveal that local light output variations within each of the tested CsI(TI) crystals limit the resolution to about 0.5%. Charge and mass dependences in the energy - light output relationship are determined by calibrating with energetic projectile fragmentation beams.
△ Less
Submitted 28 April, 2000;
originally announced April 2000.