Showing 1–23 of 23 results for author: Rakha, H A

Evaluating a Signalized Intersection Performance Using Unmanned Aerial Data

Authors: Mujahid I. Ashqer, Huthaifa I. Ashqar, Mohammed Elhenawy, Mohammed Almannaa, Mohammad A. Aljamal, Hesham A. Rakha, Marwan Bikdash

Abstract: This paper presents a novel method to compute various measures of effectiveness (MOEs) at a signalized intersection using vehicle trajectory data collected by flying drones. MOEs are key parameters in determining the quality of service at signalized intersections. Specifically, this study investigates the use of drone raw data at a busy three-way signalized intersection in Athens, Greece, and buil… ▽ More This paper presents a novel method to compute various measures of effectiveness (MOEs) at a signalized intersection using vehicle trajectory data collected by flying drones. MOEs are key parameters in determining the quality of service at signalized intersections. Specifically, this study investigates the use of drone raw data at a busy three-way signalized intersection in Athens, Greece, and builds on the open data initiative of the pNEUMA experiment. Using a microscopic approach and shockwave analysis on data extracted from realtime videos, we estimated the maximum queue length, whether, when, and where a spillback occurred, vehicle stops, vehicle travel time and delay, crash rates, fuel consumption, CO2 emissions, and fundamental diagrams. Results of the various MOEs were found to be promising, which confirms that the use of traffic data collected by drones has many applications. We also demonstrate that estimating MOEs in real-time is achievable using drone data. Such models have the ability to track individual vehicle movements within street networks and thus allow the modeler to consider any traffic conditions, ranging from highly under-saturated to highly over-saturated conditions. These microscopic models have the advantage of capturing the impact of transient vehicle behavior on various MOEs. △ Less

Submitted 16 July, 2022; originally announced July 2022.

Multi-objective Eco-Routing Model Development and Evaluation for Battery Electric Vehicles

Authors: Kyoungho Ahn, Youssef Bichiou, Mohamed Farag, Hesham A. Rakha

Abstract: This paper develops and investigates the impacts of multi-objective Nash optimum (user equilibrium) traffic assignment on a large-scale network for battery electric vehicles (BEVs) and internal combustion engine vehicles (ICEVs) in a microscopic traffic simulation environment. Eco-routing is a technique that finds the most energy efficient route. ICEV and BEV energy consumption patterns are signif… ▽ More This paper develops and investigates the impacts of multi-objective Nash optimum (user equilibrium) traffic assignment on a large-scale network for battery electric vehicles (BEVs) and internal combustion engine vehicles (ICEVs) in a microscopic traffic simulation environment. Eco-routing is a technique that finds the most energy efficient route. ICEV and BEV energy consumption patterns are significantly different with regard to their sensitivity to driving cycles. Unlike ICEVs, BEVs are more energy efficient on low-speed arterial trips compared to highway trips. Different energy consumption patterns require different eco-routing strategies for ICEVs and BEVs. This study found that eco-routing could reduce energy consumption for BEVs but also significantly increases their average travel time. The simulation study found that multi-objective routing could reduce the energy consumption of BEVs by 13.5, 14.2, 12.9, and 10.7 percent, as well as the fuel consumption of ICEVs by 0.1, 4.3, 3.4, and 10.6 percent for "not congested", "slightly congested", "moderately congested", and "highly congested" conditions, respectively. The study also found that multi-objective user equilibrium routing reduced the average vehicle travel time by up to 10.1% compared to the standard user equilibrium traffic assignment for the highly congested conditions, producing a solution closer to the system optimum traffic assignment. The results indicate that the multi-objective eco-routing can effectively reduce fuel/energy consumption with minimum impacts on travel times for both BEVs and ICEVs. △ Less

Submitted 10 August, 2020; originally announced April 2021.

Comments: Paper submitted to Transportation Research Board Annual Meeting

Estimating Transit Vehicle Dwell Times at Bus Stops

Authors: Taqwa Alhadidi, Hesham A. Rakha

Abstract: This work presents a quantitative approach to estimate the total time spent in the vicinity of a bus stop including the deceleration time, the boarding and alighting time (developed in an earlier study), the acceleration time, and re-entry time (time required to merge into the adjacent lane). Different statistical models were used to compute the deceleration, acceleration and merge times. Typical… ▽ More This work presents a quantitative approach to estimate the total time spent in the vicinity of a bus stop including the deceleration time, the boarding and alighting time (developed in an earlier study), the acceleration time, and re-entry time (time required to merge into the adjacent lane). Different statistical models were used to compute the deceleration, acceleration and merge times. Typical deceleration and acceleration levels were computed using kinematic equations that were then used to compute both the deceleration and acceleration times. The adopted method to estimate both the deceleration time and the acceleration time was validated utilizing transit data from Blacksburg Transit (BT) using the mean absolute percentage error (MAPE) and root mean square error (RMSE). The MAPE and RMSE values were calculated to be 0.3 and 13.3 percent for the deceleration time and 0.42 and 2.72 percent for the acceleration time, respectively. The re-entry time was estimated to be a function of the adjacent roadway traffic density using both a multiple linear regression and Bayesian regression approach. Both methods showed consistency in estimating the merge-time model coefficients. The proposed models can be integrated with transit applications to estimate transit vehicle travel times. △ Less

Submitted 10 August, 2020; originally announced April 2021.

Comments: Submitted to the Transportation Research Board Annual Meeting

Impact of risk factors on work zone crashes using logistic models and Random Forest

Authors: Huthaifa I Ashqar, Qadri H Shaheen, Suleiman A Ashur, Hesham A Rakha

Abstract: Work zone safety is influenced by many risk factors. Consequently, a comprehensive knowledge of the risk factors identified from crash data analysis becomes critical in reducing risk levels and preventing severe crashes in work zones. This study focuses on the 2016 severe crashes that occurred in the State of Michigan (USA) in work zones along highway I-94. The study identified the risk factors fr… ▽ More Work zone safety is influenced by many risk factors. Consequently, a comprehensive knowledge of the risk factors identified from crash data analysis becomes critical in reducing risk levels and preventing severe crashes in work zones. This study focuses on the 2016 severe crashes that occurred in the State of Michigan (USA) in work zones along highway I-94. The study identified the risk factors from a wide range of crash variables characterizing environmental, driver, crash and road-related variables. The impact of these risk factors on crash severity was investigated using frequency analyses, logistic regression statistics, and a machine learning Random Forest (RF) algorithm. It is anticipated that the findings of this study will help traffic engineers and departments of transportation in developing work zone countermeasures to improve safety and reduce the crash risk. It was found that some of these factors could be overlooked when designing and devising work zone traffic control plans. Results indicate, for example, the need for appropriate traffic control mechanisms such as harmonizing the speed of vehicles before approaching work zones, the need to provide illumination at specific locations of the work zone, and the need to establish frequent public education programs, flyers, and ads targeting high-risk driver groups. Moreover, the Random Forest algorithm was found to be efficient, promising, and recommended in crash data analysis, specifically, when the data sample size is small. △ Less

Submitted 13 April, 2021; originally announced April 2021.

Ride-hailing Impacts on Transit Ridership: Chicago Case Study

Authors: Helena Breuer, Jianhe Du, Hesham A. Rakha

Abstract: Existing literature on the relationship between ride-hailing (RH) and transit services is limited to empirical studies that lack real-time spatial contexts. To fill this gap, we took a novel real-time geospatial analysis approach. With source data on ride-hailing trips in Chicago, Illinois, we computed real-time transit-equivalent trips for all 7,949,902 ride-hailing trips in June 2019; the sheer… ▽ More Existing literature on the relationship between ride-hailing (RH) and transit services is limited to empirical studies that lack real-time spatial contexts. To fill this gap, we took a novel real-time geospatial analysis approach. With source data on ride-hailing trips in Chicago, Illinois, we computed real-time transit-equivalent trips for all 7,949,902 ride-hailing trips in June 2019; the sheer size of our sample is incomparable to the samples studied in existing literature. An existing Multinomial Nested Logit Model was used to determine the probability of a ride-hailer selecting a transit alternative to serve the specific O-D pair, P(Transit|CTA). We find that 31% of ride-hailing trips are replaceable, whereas 61% of trips are not replaceable. The remaining 8% lie within a buffer zone. We measured the robustness of this probability using a parametric sensitivity analysis and performed a two-tailed t-test. Our results indicate that of the four sensitivity parameters, the probability was most sensitive to the total travel time of a transit trip. The main contribution of our research is our thorough approach and fine-tuned series of real-time spatiotemporal analyses that investigate the replaceability of ride-hailing trips for public transit. The results and discussion intend to provide perspective derived from real trips and we anticipate that this paper will demonstrate the research benefits associated with the recording and release of ride-hailing data. △ Less

Submitted 10 August, 2020; originally announced November 2020.

Comments: Paper submitted to the Transportation Research Board Annual Meeting

Network and Station-Level Bike-Sharing System Prediction: A San Francisco Bay Area Case Study

Authors: Huthaifa I. Ashqar, Mohammed Elhenawy, Hesham A. Rakha, Mohammed Almannaa, Leanna House

Abstract: The paper develops models for modeling the availability of bikes in the San Francisco Bay Area Bike Share System applying machine learning at two levels: network and station. Investigating BSSs at the station-level is the full problem that would provide policymakers, planners, and operators with the needed level of details to make important choices and conclusions. We used Random Forest and Least-… ▽ More The paper develops models for modeling the availability of bikes in the San Francisco Bay Area Bike Share System applying machine learning at two levels: network and station. Investigating BSSs at the station-level is the full problem that would provide policymakers, planners, and operators with the needed level of details to make important choices and conclusions. We used Random Forest and Least-Squares Boosting as univariate regression algorithms to model the number of available bikes at the station-level. For the multivariate regression, we applied Partial Least-Squares Regression (PLSR) to reduce the needed prediction models and reproduce the spatiotemporal interactions in different stations in the system at the network-level. Although prediction errors were slightly lower in the case of univariate models, we found that the multivariate model results were promising for the network-level prediction, especially in systems where there is a relatively large number of stations that are spatially correlated. Moreover, results of the station-level analysis suggested that demographic information and other environmental variables were significant factors to model bikes in BSSs. We also demonstrated that the available bikes modeled at the station-level at time t had a notable influence on the bike count models. Station neighbors and prediction horizon times were found to be significant predictors, with 15 minutes being the most effective prediction horizon time. △ Less

Submitted 20 September, 2020; originally announced September 2020.

Predicting Coordinated Actuated Traffic Signal Change Times using LSTM Neural Networks

Authors: Seifeldeen Eteifa, Hesham A. Rakha, Hoda Eldardiry

Abstract: Vehicle acceleration and deceleration maneuvers at traffic signals results in significant fuel and energy consumption levels. Green light optimal speed advisory systems require reliable estimates of signal switching times to improve vehicle fuel efficiency. Obtaining these estimates is difficult for actuated signals where the length of each green indication changes to accommodate varying traffic c… ▽ More Vehicle acceleration and deceleration maneuvers at traffic signals results in significant fuel and energy consumption levels. Green light optimal speed advisory systems require reliable estimates of signal switching times to improve vehicle fuel efficiency. Obtaining these estimates is difficult for actuated signals where the length of each green indication changes to accommodate varying traffic conditions. This study details a four-step Long Short-Term Memory deep learning-based methodology that can be used to provide reasonable switching time estimates from green to red and vice versa while being robust to missing data. The four steps are data gathering, data preparation, machine learning model tuning, and model testing and evaluation. The input to the models included controller logic, signal timing parameters, time of day, traffic state from detectors, vehicle actuation data, and pedestrian actuation data. The methodology is applied and evaluated on data from an intersection in Northern Virginia. A comparative analysis is conducted between different loss functions including the mean squared error, mean absolute error, and mean relative error used in LSTM and a new loss function is proposed. The results show that while the proposed loss function outperforms conventional loss functions in terms of overall absolute error values, the choice of the loss function is dependent on the prediction horizon. In particular, the proposed loss function is outperformed by the mean relative error for very short prediction horizons and mean squared error for very long prediction horizons. △ Less

Submitted 10 August, 2020; originally announced August 2020.

Comments: Paper submitted to Transportation Research Board Annual Meeting

An In-Depth Analysis of Ride-Hailing Travel Using a Large-scale Trip-Based Dataset

Authors: Jianhe Du, Hesham A. Rakha, Helena Breuer

Abstract: With the rapid increase in ride-hailing (RH) use, a need to better understand and regulate the industry arises. This paper analyzes a year's worth of RH trip data from the Greater Chicago Area to study RH trip patterns. More than 104 million trips were analyzed. For trip rates, the results show that the total number of trips remained stable over the year, with pooled trips steadily decreasing from… ▽ More With the rapid increase in ride-hailing (RH) use, a need to better understand and regulate the industry arises. This paper analyzes a year's worth of RH trip data from the Greater Chicago Area to study RH trip patterns. More than 104 million trips were analyzed. For trip rates, the results show that the total number of trips remained stable over the year, with pooled trips steadily decreasing from 20 to 9 percent. People tend to use RH more on weekends compared to weekdays. Specifically, weekend RH trip counts (per day) are, on average, 20 percent higher than weekday trip counts. The results of this work will help policy makers and transportation administrators better understand the nature of RH trips, which in turn allows for the design of a better regulation and guidance system for the ride-hailing industry. △ Less

Submitted 13 August, 2020; originally announced August 2020.

Comments: Paper submitted to the Transportation Research Board Annual Meeting. The Chicago Case Study, Case Studies on Transport Policy, 2021

Bicycle Longitudinal Motion Modeling

Authors: Karim Fadhloun, Hesham A. Rakha, Archak Mittal

Abstract: This research effort uses vehicular traffic flow techniques to model bicyclist longitudinal motion while accounting for bicycle interactions. Specifically, an existing car-following model, the Fadhloun-Rakha (FR) model is re-parametrized to model bicyclists. Initially, the study evaluates the performance of the proposed model formulation using experimental datasets collected from two ring-road bic… ▽ More This research effort uses vehicular traffic flow techniques to model bicyclist longitudinal motion while accounting for bicycle interactions. Specifically, an existing car-following model, the Fadhloun-Rakha (FR) model is re-parametrized to model bicyclists. Initially, the study evaluates the performance of the proposed model formulation using experimental datasets collected from two ring-road bicycle experiments; one conducted in Germany in 2012, and the second in China in 2016. The validation of the model is achieved through investigating and comparing the proposed model outputs against those obtained from two state-of-the-art models, namely: the Necessary Deceleration Model (NDM), which is a model specifically designed to capture the longitudinal motion of bicyclists; and the Intelligent Driver Model, which is a car-following model that was demonstrated to be suitable for single-file bicycle traffic. Through a quantitative and qualitative evaluation, the proposed model formulation is demonstrated to produce modeling errors that are consistent with the other two models. While all three models generate trajectories that are consistent with empirically observed bicycle-following behavior, only the proposed model allows for an explicit and straightforward tuning of the bicyclist physical characteristics and the road environment. A sensitivity analysis, demonstrates the effect of varying the different model parameters on the produced trajectories, highlighting the robustness and generality of the proposed model. △ Less

Submitted 10 August, 2020; originally announced August 2020.

Comments: Submitted to Transportation Research Board Annual Meeting

A Simple Cooperative Platooning Controller for Connected Vehicles

Authors: Youssef Bichiou, Hesham A. Rakha, Hossam Abdelghaffar

Abstract: Urban traffic congestion is a chronic problem faced by many cities. It is essentially inefficient infrastructure use which results in increased vehicle fuel consumption and emissions. This in turn adds extra costs to commuters and businesses. Addressing this issue is therefore of paramount interest due to the perceived dual benefit. Many technologies were and are being developed. These include ada… ▽ More Urban traffic congestion is a chronic problem faced by many cities. It is essentially inefficient infrastructure use which results in increased vehicle fuel consumption and emissions. This in turn adds extra costs to commuters and businesses. Addressing this issue is therefore of paramount interest due to the perceived dual benefit. Many technologies were and are being developed. These include adaptive traffic signals, dedicated lanes, etc. This paper presents a simple platooning algorithm that maintains relatively small distances (pre-specified time gap) between consecutive vehicles to enhance mobility, increase transportation capacity and ultimately reduce travel costs. Several dynamic and kinematic constraints governing the motion of vehicles are also accounted for. These include acceleration, velocity, and distance constraints. This developed logic was tested on highways that traverse the downtown area of Los Angeles. Depending on the market penetration rate of connected automated vehicles versus non-connected automated vehicles, a reduction in travel time, delay and fuel consumed across the city can be observed. Vehicles are expected to reach their destination in less travel time, delay and consumed fuel. The reduction percentages range from 0 to 5 percent, 0 to 9.4 percent, and 2.58 to 8.17 percent, respectively. △ Less

Submitted 10 August, 2020; originally announced August 2020.

Comments: Submitted to the Transportation Research Board Annual Meeting

Developing a Novel Crowdsourcing Business Model for Micro-Mobility Ride-Sharing Systems: Methodology and Preliminary Results

Authors: Mohammed Elhenawy, MD Mostafizur Rahman Komol, Huthaifa I. Ashqar, Mohammed Hamad Almannaa, Mahmoud Masoud, Hesham A. Rakha, Andry Rakotonirainy

Abstract: Micro-mobility ride-sharing is an emerging technology that provides access to the transit system with minimum environmental impacts. Significant research is required to ensure that micro-mobility ride-sharing provides a better fulfilment of user needs. In this study, we propose a novel business model for the micro-mobility ride-sharing system where light vehicles such as electric scooters and elec… ▽ More Micro-mobility ride-sharing is an emerging technology that provides access to the transit system with minimum environmental impacts. Significant research is required to ensure that micro-mobility ride-sharing provides a better fulfilment of user needs. In this study, we propose a novel business model for the micro-mobility ride-sharing system where light vehicles such as electric scooters and electric bikes are crowdsourced. This new model consists of three entities, the suppliers, the customers, and a management party, which is responsible for receiving, renting, booking, and demand matching with offered resources. The proposed model has the potential to allow the suppliers to define the location of their private e-scooter/e-bike and the period of time they are available for rent, match it with a particular demand, and then offer suppliers the opportunity to get their e-scooters/e-bikes rented and returned at the end of the renting period to the same (nearby) location. The management party will need to match the e-scooter/e-bike to a series of renting demands with the last demand as a destination very close to the initial location of the e-scooter/e-bike at the start of the renting period. One potential advantage of the proposed model is that it shifts the charging and maintenance efforts to a crowd of suppliers. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Comments: Submitted to TRB 2021

Modeling bike availability in a bike-sharing system using machine learning

Authors: Huthaifa I. Ashqar, Mohammed Elhenawy, Mohammed H. Almannaa, Ahmed Ghanem, Hesham A. Rakha, Leanna House

Abstract: This paper models the availability of bikes at San Francisco Bay Area Bike Share stations using machine learning algorithms. Random Forest (RF) and Least-Squares Boosting (LSBoost) were used as univariate regression algorithms, and Partial Least-Squares Regression (PLSR) was applied as a multivariate regression algorithm. The univariate models were used to model the number of available bikes at ea… ▽ More This paper models the availability of bikes at San Francisco Bay Area Bike Share stations using machine learning algorithms. Random Forest (RF) and Least-Squares Boosting (LSBoost) were used as univariate regression algorithms, and Partial Least-Squares Regression (PLSR) was applied as a multivariate regression algorithm. The univariate models were used to model the number of available bikes at each station. PLSR was applied to reduce the number of required prediction models and reflect the spatial correlation between stations in the network. Results clearly show that univariate models have lower error predictions than the multivariate model. However, the multivariate model results are reasonable for networks with a relatively large number of spatially correlated stations. Results also show that station neighbors and the prediction horizon time are significant predictors. The most effective prediction horizon time that produced the least prediction error was 15 minutes. △ Less

Submitted 12 June, 2020; originally announced June 2020.

Comments: Published in: 2017 5th IEEE International Conference on Models and Technologies for Intelligent Transportation Systems (MT-ITS)

Journal ref: 2017 5th IEEE International Conference on Models and Technologies for Intelligent Transportation Systems (MT-ITS), 2017, pp. 374-378

Modeling bike counts in a bike-sharing system considering the effect of weather conditions

Authors: Huthaifa I. Ashqar, Mohammed Elhenawy, Hesham A. Rakha

Abstract: The paper develops a method that quantifies the effect of weather conditions on the prediction of bike station counts in the San Francisco Bay Area Bike Share System. The Random Forest technique was used to rank the predictors that were then used to develop a regression model using a guided forward step-wise regression approach. The Bayesian Information Criterion was used in the development and co… ▽ More The paper develops a method that quantifies the effect of weather conditions on the prediction of bike station counts in the San Francisco Bay Area Bike Share System. The Random Forest technique was used to rank the predictors that were then used to develop a regression model using a guided forward step-wise regression approach. The Bayesian Information Criterion was used in the development and comparison of the various prediction models. We demonstrated that the proposed approach is promising to quantify the effect of various features on a large BSS and on each station in cases of large networks with big data. The results show that the time-of-the-day, temperature, and humidity level (which has not been studied before) are significant count predictors. It also shows that as weather variables are geographic location dependent and thus should be quantified before using them in modeling. Further, findings show that the number of available bikes at station i at time t-1 and time-of-the-day were the most significant variables in estimating the bike counts at station i. △ Less

Submitted 13 June, 2020; originally announced June 2020.

Comments: Published in Case Studies on Transport Policy (Volume 7, Issue 2, June 2019, Pages 261-268)

Journal ref: Case studies on transport policy 7, no. 2 (2019): 261-268

Smartphone Transportation Mode Recognition Using a Hierarchical Machine Learning Classifier and Pooled Features From Time and Frequency Domains

Authors: Huthaifa I. Ashqar, Mohammed H. Almannaa, Mohammed Elhenawy, Hesham A. Rakha, Leanna House

Abstract: This paper develops a novel two-layer hierarchical classifier that increases the accuracy of traditional transportation mode classification algorithms. This paper also enhances classification accuracy by extracting new frequency domain features. Many researchers have obtained these features from global positioning system data; however, this data was excluded in this paper, as the system use might… ▽ More This paper develops a novel two-layer hierarchical classifier that increases the accuracy of traditional transportation mode classification algorithms. This paper also enhances classification accuracy by extracting new frequency domain features. Many researchers have obtained these features from global positioning system data; however, this data was excluded in this paper, as the system use might deplete the smartphone's battery and signals may be lost in some areas. Our proposed two-layer framework differs from previous classification attempts in three distinct ways: 1) the outputs of the two layers are combined using Bayes' rule to choose the transportation mode with the largest posterior probability; 2) the proposed framework combines the new extracted features with traditionally used time domain features to create a pool of features; and 3) a different subset of extracted features is used in each layer based on the classified modes. Several machine learning techniques were used, including k-nearest neighbor, classification and regression tree, support vector machine, random forest, and a heterogeneous framework of random forest and support vector machine. Results show that the classification accuracy of the proposed framework outperforms traditional approaches. Transforming the time domain features to the frequency domain also adds new features in a new space and provides more control on the loss of information. Consequently, combining the time domain and the frequency domain features in a large pool and then choosing the best subset results in higher accuracy than using either domain alone. The proposed two-layer classifier obtained a maximum classification accuracy of 97.02%. △ Less

Submitted 12 June, 2020; originally announced June 2020.

Journal ref: IEEE Transactions on Intelligent Transportation Systems Volume: 20 , Issue: 1 , pp. 244-252, Jan. 2019

Vulnerable Road User Detection Using Smartphone Sensors and Recurrence Quantification Analysis

Authors: Huthaifa I. Ashqar, Mohammed Elhenawy, Mahmoud Masoud, Andry Rakotonirainy, Hesham A. Rakha

Abstract: With the fast advancements of the Autonomous Vehicle (AV) industry, detection of Vulnerable Road Users (VRUs) using smartphones is critical for safety applications of Cooperative Intelligent Transportation Systems (C-ITSs). This study explores the use of low-power smartphone sensors and the Recurrence Quantification Analysis (RQA) features for this task. These features are computed over a threshol… ▽ More With the fast advancements of the Autonomous Vehicle (AV) industry, detection of Vulnerable Road Users (VRUs) using smartphones is critical for safety applications of Cooperative Intelligent Transportation Systems (C-ITSs). This study explores the use of low-power smartphone sensors and the Recurrence Quantification Analysis (RQA) features for this task. These features are computed over a thresholded similarity matrix extracted from nine channels: accelerometer, gyroscope, and rotation vector in each direction (x, y, and z). Given the high-power consumption of GPS, GPS data is excluded. RQA features are added to traditional time domain features to investigate the classification accuracy when using binary, four-class, and five-class Random Forest classifiers. Experimental results show a promising performance when only using RQA features with a resulted accuracy of 98. 34% and a 98. 79% by adding time domain features. Results outperform previous reported accuracy, demonstrating that RQA features have high classifying capability with respect to VRU detection. △ Less

Submitted 12 June, 2020; originally announced June 2020.

Comments: Published in: 2019 IEEE Intelligent Transportation Systems Conference (ITSC)

Journal ref: 2019 IEEE Intelligent Transportation Systems Conference (ITSC), Auckland, New Zealand, 2019, pp. 1054-1059

Empirical Study of Effect of Dynamic Travel Time Information on Driver Route Choice Behavior

Authors: Jinghui Wang, Hesham A. Rakha

Abstract: The objective of this paper is to study the effect of travel time information on day-to-day driver route choice behavior. A real-world experimental study is designed to have participants repeatedly choose between two alternative routes for five origin-destination pairs over multiple days after providing them with dynamically updated travel time information (average travel time and travel time vari… ▽ More The objective of this paper is to study the effect of travel time information on day-to-day driver route choice behavior. A real-world experimental study is designed to have participants repeatedly choose between two alternative routes for five origin-destination pairs over multiple days after providing them with dynamically updated travel time information (average travel time and travel time variability). The results demonstrate that historical travel time information enhances behavioral rationality by 10\% on average and reduces inertial tendencies to increase risk seeking in the gain domain. Furthermore, expected travel time information is demonstrated to be more effective than travel time variability information in enhancing rational behavior when drivers have limited experiences. After drivers gain sufficient knowledge of routes, however, the difference in behavior associated with the two information types becomes insignificant. The results also demonstrate that, when drivers lack experience, the faster less reliable route is more attractive than the slower more reliable route. However, with cumulative experiences, drivers become more willing to take the more reliable route given that they are reluctant to become risk seekers once experience is gained. Furthermore, the effect of information on driver behavior differs significantly by participant and trip, which is, to a large extent, dependent on personal traits and trip characteristics. △ Less

Submitted 2 March, 2020; originally announced March 2020.

Journal ref: Sensors 2020, 20, 3257

A Repeated Game Freeway Lane Changing Model

Authors: Kyungwon Kang, Hesham A Rakha

Abstract: Lane changes are complex safety and throughput critical driver actions. Most lane changing models deal with lane-changing maneuvers solely from the merging driver's standpoint and thus ignore driver interaction. To overcome this shortcoming, we develop a game-theoretical decision-making model and validate the model using empirical merging maneuver data at a freeway on-ramp. Specifically, this pape… ▽ More Lane changes are complex safety and throughput critical driver actions. Most lane changing models deal with lane-changing maneuvers solely from the merging driver's standpoint and thus ignore driver interaction. To overcome this shortcoming, we develop a game-theoretical decision-making model and validate the model using empirical merging maneuver data at a freeway on-ramp. Specifically, this paper advances our repeated game model in a previous paper by using updated payoff functions. Validation results using the NGSIM empirical data show that the developed game-theoretical model provides better prediction accuracy compared to previous work, with correct predictions approximately 86 percent of the time. In addition, a sensitivity analysis demonstrates the rationality and sensitivity of the model to variations in various factors. To provide evidence of the benefits of the repeated game approach, which takes into account previous decision-making results, a case study is conducted using an agent-based simulation model. The proposed repeated game model produces superior performance to a one-shot game model, when simulating actual freeway merging behaviors. Finally, this lane change model, which captures the collective decision-making between human drivers, can be used to develop automated vehicle driving strategies. △ Less

Submitted 29 January, 2020; originally announced February 2020.

Comments: The paper has been submitted to Sensors

Journal ref: Sensors, 2020, 20, 1554

Real-time Estimation of Vehicle Counts on Signalized Intersection Approaches Using Probe Vehicle Data

Authors: Mohammad A. Aljamal, Hossam M. Abdelghaffar, Hesham A. Rakha

Abstract: This paper presents a novel method for estimating the number of vehicles traveling along signalized approaches using probe vehicle data only. The proposed method uses the Kalman Filtering technique to produce reliable vehicle count estimates using real-time probe vehicle estimates of the expected travel times. The proposed method introduces a novel variable estimation interval that allows for high… ▽ More This paper presents a novel method for estimating the number of vehicles traveling along signalized approaches using probe vehicle data only. The proposed method uses the Kalman Filtering technique to produce reliable vehicle count estimates using real-time probe vehicle estimates of the expected travel times. The proposed method introduces a novel variable estimation interval that allows for higher estimation precision, as the updating time interval always contains a fixed number of probe vehicles. The proposed method is evaluated using empirical and simulated data, the former of which were collected along a signalized roadway in downtown Blacksburg, VA. Results indicate that vehicle count estimates produced by the proposed method are accurate. The paper also examines the model's accuracy when installing a single stationary sensor (e.g., loop detector), producing slight improvements especially when the probe vehicle market penetration rate is low. Finally, the paper investigates the sensitivity of the estimation model to traffic demand levels, showing that the model works better at higher demand levels given that more probe vehicles exist for the same market penetration rate. △ Less

Submitted 4 January, 2020; originally announced January 2020.

Comments: In review in the IEEE Transactions on Intelligent Transportation Systems

Journal ref: 2020. IEEE Transactions on Intelligent Transportation Systems

Sliding Mode Network Perimeter Control

Authors: Youssef Bichiou, Maha Elouni, Hossam M. Abdelghaffar, Hesham A. Rakha

Abstract: Urban traffic congestion is a chronic problem faced by many cities in the US and worldwide. It results in inefficient infrastructure use as well as increased vehicle fuel consumption and emission levels. Congestion is intertwined with delay, as road users waste precious hours on the road, which in turn reduces productivity. Researchers have developed, and continue to develop, tools and systems to… ▽ More Urban traffic congestion is a chronic problem faced by many cities in the US and worldwide. It results in inefficient infrastructure use as well as increased vehicle fuel consumption and emission levels. Congestion is intertwined with delay, as road users waste precious hours on the road, which in turn reduces productivity. Researchers have developed, and continue to develop, tools and systems to alleviate this problem. Network perimeter control is one such tool that has been studied extensively. It attempts to control the flow of vehicles entering a protected area to ensure that the congested regime predetermined by the Network Fundamental Diagram (NFD) is not reached. In this paper, an approach derived from sliding mode control theory is presented. Its main advantages over proportional-integral controllers include (1) minimal tuning, (2) no linearization of the governing equations, (3) no assumptions with regard to the shape of the NFD, and (4) ability to handle various demand profiles without the need to retune the controller. A sliding mode controller was implemented and tested on a congested grid network. The results show that the proposed controller produces network-wide delay savings and disperses congestion effectively. △ Less

Submitted 2 March, 2020; v1 submitted 4 January, 2020; originally announced January 2020.

Comments: Accepted for publication in IEEE Transactions on Intelligent Transportation Systems

Eco-Driving at Signalized Intersections: A Multiple Signal Optimization Approach

Authors: Hao Yang, Fawaz Almutairi, Hesham A. Rakha

Abstract: Consecutive traffic signalized intersections can increase vehicle stops, producing vehicle accelerations on arterial roads and potentially increasing vehicle fuel consumption levels. Eco-driving systems are one method to improve vehicle energy efficiency with the help of vehicle connectivity. In this paper, an eco-driving system is developed that computes a fuel-optimized vehicle trajectory while… ▽ More Consecutive traffic signalized intersections can increase vehicle stops, producing vehicle accelerations on arterial roads and potentially increasing vehicle fuel consumption levels. Eco-driving systems are one method to improve vehicle energy efficiency with the help of vehicle connectivity. In this paper, an eco-driving system is developed that computes a fuel-optimized vehicle trajectory while traversing more than one signalized intersection. The system is designed in a modular and scalable fashion allowing it to be implemented in large networks without significantly increasing the computational complexity. The proposed system utilizes signal phasing and timing (SPaT) data that are communicated to connected vehicles (CVs) together with real-time vehicle dynamics to compute fuel-optimum trajectories. The proposed algorithm is incorporated in the INTEGRATION microscopic traffic assignment and simulation software to conduct a comprehensive sensitivity analysis of various variables, including: system market penetration rates (MPRs), demand levels, phase splits, offsets and traffic signal spacings on the system performance. The analysis shows that at 100\% MPR, fuel consumption can be reduced by as high as 13.8\%. Moreover, higher MPRs and shorter phase lengths result in larger fuel savings. Optimum demand levels and traffic signal spacings exist that maximize the effectiveness of the algorithm. Furthermore, the study demonstrates that the algorithm works less effective when the traffic signal offset is closer to its optimal value. Finally, the study highlights the need for further work to enhance the algorithm to deal with over-saturated traffic conditions. △ Less

Submitted 4 January, 2020; originally announced January 2020.

Comments: In review in the IEEE Transactions on Intelligent Transportation Systems

Journal ref: IEEE Transactions on Intelligent Transportation Systems, 2020

Vehicle Platooning Impact on Drag Coefficients and Energy/Fuel Saving Implications

Authors: Ahmed A. Hussein, Hesham A. Rakha

Abstract: In this paper, empirical data from the literature are used to develop general power models that capture the impact of a vehicle position, in a platoon of homogeneous vehicles, and the distance gap to its lead (and following) vehicle on its drag coefficient. These models are developed for light duty vehicles, buses, and heavy duty trucks. The models were fit using a constrained optimization framewo… ▽ More In this paper, empirical data from the literature are used to develop general power models that capture the impact of a vehicle position, in a platoon of homogeneous vehicles, and the distance gap to its lead (and following) vehicle on its drag coefficient. These models are developed for light duty vehicles, buses, and heavy duty trucks. The models were fit using a constrained optimization framework to fit a general power function using either direct drag force or fuel measurements. The model is then used to extrapolate the empirical measurements to a wide range of vehicle distance gaps within a platoon. Using these models we estimate the potential fuel reduction associated with homogeneous platoons of light duty vehicles, buses, and heavy duty trucks. The results show a significant reduction in the vehicle fuel consumption when compared with those based on a constant drag coefficient assumption. Specifically, considering a minimum time gap between vehicles of $0.5 \; secs$ (which is typical considering state-of-practice communication and mechanical system latencies) running at a speed of $100 \; km/hr$, the optimum fuel reduction that is achieved is $4.5 \%$, $15.5 \%$, and $7.0 \%$ for light duty vehicle, bus, and heavy duty truck platoons, respectively. For longer time gaps, the bus and heavy duty truck platoons still produce fuel reductions in the order of $9.0 \%$ and $4.5 \%$, whereas light duty vehicles produce negligible fuel savings. △ Less

Submitted 2 March, 2020; v1 submitted 2 January, 2020; originally announced January 2020.

Comments: In review in the Journal of Applied Energy. IEEE Transactions on Vehicular Technology, 2021

Automatic Freeway Bottleneck Identification and Visualization using Image Processing Techniques

Authors: Hao Chen, Hesham A Rakha

Abstract: This paper develops an automatic freeway bottleneck identification and visualization algorithm using a combination of image processing techniques and traffic flow theory. Unlike previous studies that are based solely on loop detector data, the proposed method can use traffic measurements from various sensing technologies. Four steps are included in the proposed algorithm. First, the raw spatiotemp… ▽ More This paper develops an automatic freeway bottleneck identification and visualization algorithm using a combination of image processing techniques and traffic flow theory. Unlike previous studies that are based solely on loop detector data, the proposed method can use traffic measurements from various sensing technologies. Four steps are included in the proposed algorithm. First, the raw spatiotemporal speed data are transformed into binary matrices using image binarization techniques. Second, two post-processer filters are developed to clean the binary matrices by filtering scattered noise cells and localized congested regions. Subsequently, the roadway geometry information is used to remove the impact of acceleration zones downstream of bottlenecks and thus locate bottlenecks more precisely. Finally, the major characteristics of bottlenecks including activation and deactivation points, shockwave speeds and traffic delay caused by bottleneck are automatically extracted and visualized. The proposed algorithm is tested using loop detector data from I-5 demonstrating that the proposed method outperforms the state-of-the-art methods for congestion identification. The second test using INRIX data from I-66 demonstrates ability of the proposed algorithm to accurately extract and visualize bottleneck characteristics. △ Less

Submitted 17 November, 2019; originally announced November 2019.

Comments: 18 pages, 8 figures, 1 table

The Wireless Control Plane: An Overview and Directions for Future Research

Authors: EmadelDin A. Mazied, Mustafa Y. ElNainay, Mohammad J. Abdel-Rahman, Scott F. Midkiff, Mohamed R. M. Rizk, Hesham A. Rakha, Allen B. MacKenzie

Abstract: Software-defined networking (SDN), which has been successfully deployed in the management of complex data centers, has recently been incorporated into a myriad of 5G networks to intelligently manage a wide range of heterogeneous wireless devices, software systems, and wireless access technologies. Thus, the SDN control plane needs to communicate wirelessly with the wireless data plane either direc… ▽ More Software-defined networking (SDN), which has been successfully deployed in the management of complex data centers, has recently been incorporated into a myriad of 5G networks to intelligently manage a wide range of heterogeneous wireless devices, software systems, and wireless access technologies. Thus, the SDN control plane needs to communicate wirelessly with the wireless data plane either directly or indirectly. The uncertainties in the wireless SDN control plane (WCP) make its design challenging. Both WCP schemes (direct WCP, D-WCP, and indirect WCP, I-WCP) have been incorporated into recent 5G networks; however, a discussion of their design principles and their design limitations is missing. This paper introduces an overview of the WCP design (I-WCP and D-WCP) and discusses its intricacies by reviewing its deployment in recent 5G networks. Furthermore, to facilitate synthesizing a robust WCP, this paper proposes a generic WCP framework using deep reinforcement learning (DRL) principles and presents a roadmap for future research. △ Less

Submitted 8 October, 2018; originally announced October 2018.

Comments: This paper has been accepted to appear in Elsevier Journal of Networks and Computer Applications. It has 34 pages, 8 figures, and two tables