-
Coherence effects in LIPSS formation on silicon wafers upon picosecond laser pulse irradiations
Authors:
Inam Mirza,
Juraj Sládek,
Yoann Levy,
Alexander V. Bulgakov,
Vasilis Dimitriou,
Helen Papadaki,
Evaggelos Kaselouris,
Paulius Gecys,
Gediminas Račiukaitis,
Nadezhda M. Bulgakova
Abstract:
Using different laser irradiation patterns to modify of silicon surface, it has been demonstrated that, at rather small overlapping between irradiation spots, highly regular laser-induced periodic surface structures (LIPSS) can be produced already starting from the second laser pulse, provided that polarization direction coincides with the scanning direction. If the laser irradiation spot is shift…
▽ More
Using different laser irradiation patterns to modify of silicon surface, it has been demonstrated that, at rather small overlapping between irradiation spots, highly regular laser-induced periodic surface structures (LIPSS) can be produced already starting from the second laser pulse, provided that polarization direction coincides with the scanning direction. If the laser irradiation spot is shifted from the previous one perpendicular to light polarization, LIPSS are not formed even after many pulses. This coherence effect is explained by a three-wave interference, - surface electromagnetic waves (SEWs) generated within the irradiated spot, SEWs scattered from the crater edge formed by the previous laser pulse, and the incoming laser pulse, - providing conditions for amplification of the periodic light-absorption pattern. To study possible consequences of SEW scattering from the laser-modified regions, where the refractive index can change due to material melting, amorphization, and the residual stress formed by previous laser pulses, hydrodynamic modelling and simulations have been performed within the melting regime. The simulations show that stress and vertical displacement could be amplified upon laser scanning. Both mechanisms, three-wave interference and stress accumulation, could enable an additional degree of controlling surface structuring.
△ Less
Submitted 3 December, 2024; v1 submitted 18 November, 2024;
originally announced November 2024.
-
Differential pumping for kHz operation of a Laser Wakefield accelerator based on a continuously flowing Hydrogen gas jet
Authors:
Joséphine Monzac,
Slava Smartsev,
Julius Huijts,
Lucas Rovige,
Igor A. Andriyash,
Aline Vernier,
Vidmantas Tomkus,
Valdas Girdauskas,
Gediminas Raciukaitis,
Miglė Mackevičiūtė,
Valdemar Stankevic,
Antoine Cavagna,
Jaismeen Kaur,
André Kalouguine,
Rodrigo Lopez-Martens,
Jérôme Faure
Abstract:
Laser-Wakefield Accelerators (LWFA) running at kHz repetition rates hold great potential for applications. They typically operate with low-energy, highly compressed laser pulses focused in high-pressure gas targets. Experiments have shown that the best-quality electron beams are achieved using Hydrogen gas targets. However, continuous operation with Hydrogen requires a dedicated pumping system. In…
▽ More
Laser-Wakefield Accelerators (LWFA) running at kHz repetition rates hold great potential for applications. They typically operate with low-energy, highly compressed laser pulses focused in high-pressure gas targets. Experiments have shown that the best-quality electron beams are achieved using Hydrogen gas targets. However, continuous operation with Hydrogen requires a dedicated pumping system. In this work, we present a method for designing a differential pumping system, which we successfully implemented in our experiments. This enabled the first demonstration of continuous operation of a kHz LWFA using a high-pressure Hydrogen gas jet. The system effectively maintained a pressure below 3e-4 mbar, even with a free-flowing gas jet operating at 140 bar backing pressure. Numerical fluid dynamics and optical simulations were used to guide and validate the system's design.
△ Less
Submitted 29 January, 2025; v1 submitted 25 October, 2024;
originally announced October 2024.
-
Highly-efficient electron ponderomotive acceleration in underdense plasmas
Authors:
Lorenzo Martelli,
Olena Kononenko,
Igor Andriyash,
Jonathan Wheeler,
Julien Gautier,
Jean-Philippe Goddet,
Amar Tafzi,
Ronan Lahaye,
Camilla Giaccaglia,
Alessandro Flacco,
Vidmantas Tomkus,
Migle Mackevičiūtė,
Juozas Dudutis,
Valdemar Stankevic,
Paulius Gečys,
Gediminas Račiukaitis,
Henri Kraft,
Xuan Quyen Dinh,
Cédric Thaury
Abstract:
Laser-plasma accelerators represent a promising technology for future compact accelerating systems, enabling the acceleration of tens of pC to above $1\,$GeV over just a few centimeters. Nonetheless, these devices currently lack the stability, beam quality and average current of conventional systems. While many efforts have focused on improving acceleration stability and quality, little progress h…
▽ More
Laser-plasma accelerators represent a promising technology for future compact accelerating systems, enabling the acceleration of tens of pC to above $1\,$GeV over just a few centimeters. Nonetheless, these devices currently lack the stability, beam quality and average current of conventional systems. While many efforts have focused on improving acceleration stability and quality, little progress has been made in increasing the beam's average current, which is essential for future laser-plasma-based applications. In this paper, we investigate a laser-plasma acceleration regime aimed at increasing the beam average current with energies up to few-MeVs, efficiently enhancing the beam charge. We present experimental results on configurations that allow reaching charges of $5-30\,$nC and a maximum conversion efficiency of around $14\,$%. Through comprehensive Particle-In-Cell simulations, we interpret the experimental results and present a detailed study on electron dynamics. From our analysis, we show that most electrons are not trapped in a plasma wave; rather, they experience ponderomotive acceleration. Thus, we prove the laser pulse as the main driver of the particles' energy gain process.
△ Less
Submitted 1 August, 2024;
originally announced August 2024.
-
Optical ionization effects in kHz laser wakefield acceleration with few-cycle pulses
Authors:
Joséphine Monzac,
Slava Smartsev,
Julius Huijts,
Lucas Rovige,
Igor A. Andriyash,
Aline Vernier,
Vidmantas Tomkus,
Valdas Girdauskas,
Gediminas Raciukaitis,
Miglė Mackevičiūtė,
Valdemar Stankevic,
Antoine Cavagna,
Jaismeen Kaur,
André Kalouguine,
Rodrigo Lopez-Martens,
Jérôme Faure
Abstract:
We present significant advances in Laser Wakefield Acceleration (LWFA) operating at a 1 kHz repetition rate, employing a sub-TW, few-femtosecond laser and a continuously flowing hydrogen gas target. We conducted the first comprehensive study assessing how the nature of the gas within the target influences accelerator performance. This work confirms and elucidates the superior performance of hydrog…
▽ More
We present significant advances in Laser Wakefield Acceleration (LWFA) operating at a 1 kHz repetition rate, employing a sub-TW, few-femtosecond laser and a continuously flowing hydrogen gas target. We conducted the first comprehensive study assessing how the nature of the gas within the target influences accelerator performance. This work confirms and elucidates the superior performance of hydrogen in kHz LWFA. Our system generates quasi-monoenergetic electron bunches with energies up to 10 MeV, bunch charges of 2 pC, and angular divergences of 15 mrad. Notably, our novel scheme relying on differential pumping enables continuous operation at kHz repetition rates, contrasting with previous systems that operated in burst mode to achieve similar beam properties. Particle-in-cell simulations explain hydrogen's superior performances: the ionization effects in nitrogen and helium distort the laser pulse, negatively impacting accelerator performance. These effects are strongly mitigated in hydrogen plasma, thereby enhancing beam quality. This analysis represents a significant step forward in optimizing and understanding kHz LWFA. It underscores the critical role of hydrogen and the imperative need to develop hydrogen-compatible target systems capable of managing high repetition rates, as exemplified by our differential pumping system. These advances lay the groundwork for further developments in high-repetition-rate LWFA technology.
△ Less
Submitted 20 September, 2024; v1 submitted 25 June, 2024;
originally announced June 2024.
-
Symmetric and asymmetric shocked gas jets for laser-plasma experiments
Authors:
Lucas Rovige,
Julius Huijts,
Aline Vernier,
Igor Andriyash,
François Sylla,
Vidmantas Tomkus,
Valdas Girdauskas,
Gediminas Raciukaitis,
Juozas Dudutis,
Valdemar Stankevic,
Paulius Gecys,
Jerome Faure
Abstract:
Shocks in supersonic flows offer both a high-density and sharp density gradients that can be used, for instance,for gradient injection in laser-plasma accelerators. We report on a parametric study of oblique shocks created by inserting a straight axisymmetric section at the end of a supersonic "de Laval" nozzle. The impact of different parameters such as throat diameter and straight section length…
▽ More
Shocks in supersonic flows offer both a high-density and sharp density gradients that can be used, for instance,for gradient injection in laser-plasma accelerators. We report on a parametric study of oblique shocks created by inserting a straight axisymmetric section at the end of a supersonic "de Laval" nozzle. The impact of different parameters such as throat diameter and straight section length is studied through computational fluid dynamics (CFD) simulations. Experimental characterizations of a shocked nozzle are compared to CFD simulations and found to be in good agreement. We then introduce a newly designed asymmetric shocked gas jet, where the straight section is only present on one lateral side of the nozzle, thus providing a gas profile that can be used for density transition injection. In this case, full-3D fluid simulations and experimental measurements are compared and show excellent agreement.
△ Less
Submitted 23 March, 2021;
originally announced March 2021.
-
Optimization and stabilization of a kilohertz laser-plasma accelerator
Authors:
L. Rovige,
J. Huijts,
I. A. Andriyash,
A. Vernier,
M. Ouillé,
Z. Cheng,
T. Asai,
Y. Fukuda,
V. Tomkus,
V. Girdauskas,
G. Raciukaitis,
J. Dudutis,
V. Stankevic,
P. Gecys,
R. Lopez-Martens,
J. Faure
Abstract:
Laser plasma acceleration at kilohertz repetition rate has recently been shown to work in two different regimes, with pulse lengths of either 30 fs or 3.5 fs. We now report on a systematic study in which a large range of pulse durations and plasma densities were investigated through continuous tuning of the laser spectral bandwidth. Indeed, two LPA processes can be distinguished, where beams of th…
▽ More
Laser plasma acceleration at kilohertz repetition rate has recently been shown to work in two different regimes, with pulse lengths of either 30 fs or 3.5 fs. We now report on a systematic study in which a large range of pulse durations and plasma densities were investigated through continuous tuning of the laser spectral bandwidth. Indeed, two LPA processes can be distinguished, where beams of the highest quality, with 5.4 pC charge and a spectrum peaked at 2-2.5 MeV are obtained with short pulses propagating in moderate plasma densities. Through Particle-in-Cell simulations the two different acceleration processes are thoroughly explained. Finally, we proceed to show the results of a 5-hour continuous and stable run of our LPA accelerator accumulating more than $\mathrm{18\times10^6}$ consecutive shots, with 2.6 pC charge and peaked 2.5 MeV spectrum. A parametric study of the influence of the laser driver energy through PIC simulations underlines that this unprecedented stability was obtained thanks to micro-scale density gradient injection. Together, these results represent an important step towards stable laser-plasma accelerated electron beams at kilohertz repetition rate.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Fibonacci terahertz imaging by silicon diffractive optics
Authors:
Domas Jokubauskis,
Linas Minkevičius,
Mindaugas Karaliūnas,
Simonas Indrišiūnas,
Irmantas Kašalynas,
Gediminas Račiukaitis,
Gintaras Valušis
Abstract:
Fibonacci or bifocal terahertz (THz) imaging is demonstrated experimentally employing silicon diffractive zone plate (SDZP) in a continuous wave mode. Images simultaneously recorded in two different planes are exhibited at 0.6 THz frequency with the spatial resolution of wavelength. Multi-focus imaging operation of the Fibonacci lens is compared with a performance of the conventional silicon phase…
▽ More
Fibonacci or bifocal terahertz (THz) imaging is demonstrated experimentally employing silicon diffractive zone plate (SDZP) in a continuous wave mode. Images simultaneously recorded in two different planes are exhibited at 0.6 THz frequency with the spatial resolution of wavelength. Multi-focus imaging operation of the Fibonacci lens is compared with a performance of the conventional silicon phase zone plate. Spatial profiles and focal depth features are discussed varying the frequency from 0.3 THz to 0.6 THz. Good agreement between experimental results and simulation data is revealed.
△ Less
Submitted 7 October, 2020;
originally announced October 2020.
-
Demonstration of stable long-term operation of a kilohertz laser-plasma accelerator
Authors:
Lucas Rovige,
Julius Huijts,
Aline Vernier,
Vidmantas Tomkus,
Valdas Girdauskas,
Gediminas Raciukaitis,
Juozas Dudutis,
Valdemar Stankevic,
Paulius Gecys,
Marie Ouillé,
Zhao Cheng,
Rodrigo Lopez-Martens,
Jérôme Faure
Abstract:
We report on the stable and continuous operation of a kilohertz laser-plasma accelerator. Electron bunches with 2.6 pC charge and 2.5 MeV peak energy were generated via injection and trapping in a downward plasma density ramp. This density transition was produced in a newly designed asymmetrically shocked gas nozzle. The reproducibility of the electron source was also assessed over a period of a w…
▽ More
We report on the stable and continuous operation of a kilohertz laser-plasma accelerator. Electron bunches with 2.6 pC charge and 2.5 MeV peak energy were generated via injection and trapping in a downward plasma density ramp. This density transition was produced in a newly designed asymmetrically shocked gas nozzle. The reproducibility of the electron source was also assessed over a period of a week and found to be satisfactory with similar values of the beam charge and energy. These results show that the reproducibility and stability of the laser-plasma accelerator are greatly enhanced on the long-term scale when using a robust scheme for density gradient injection.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
Laser printed nano-gratings: orientation and period peculiarities
Authors:
Valdemar Stankevič,
Gediminas Račiukaitis,
Francesca Bragheri,
Xuewen Wang,
Eugene G. Gamaly,
Roberto Osellame,
Saulius Juodkazis
Abstract:
Understanding of material behaviour at nanoscale under intense laser excitation is becoming critical for future application of nanotechnologies. Nanograting formation by linearly polarised ultra-short laser pulses has been studied systematically in fused silica for various pulse energies at 3D laser printing/writing conditions, typically used for the industrial fabrication of optical elements. The…
▽ More
Understanding of material behaviour at nanoscale under intense laser excitation is becoming critical for future application of nanotechnologies. Nanograting formation by linearly polarised ultra-short laser pulses has been studied systematically in fused silica for various pulse energies at 3D laser printing/writing conditions, typically used for the industrial fabrication of optical elements. The period of the nanogratings revealed a dependence on the orientation of the scanning direction. A tilt of the nanograting wave vector at a fixed laser polarisation was also observed. The mechanism responsible for this peculiar dependency of several features of the nanogratings on the writing direction is qualitatively explained by considering the heat transport flux in the presence of a linearly polarised electric field, rather than by temporal and spatial chirp of the laser beam. The confirmed vectorial nature of the light-matter interaction opens new control of material processing with nanoscale precision.
△ Less
Submitted 3 September, 2016;
originally announced September 2016.
