-
RL-based Adaptive Task Offloading in Mobile-Edge Computing for Future IoT Networks
Authors:
Ziad Qais Al Abbasi,
Khaled M. Rabie,
Senior Member,
Xingwang Li,
Senior Member,
Wali Ullah Khan,
Asma Abu Samah
Abstract:
The Internet of Things (IoT) has been increasingly used in our everyday lives as well as in numerous industrial applications. However, due to limitations in computing and power capabilities, IoT devices need to send their respective tasks to cloud service stations that are usually located at far distances. Having to transmit data far distances introduces challenges for services that require low la…
▽ More
The Internet of Things (IoT) has been increasingly used in our everyday lives as well as in numerous industrial applications. However, due to limitations in computing and power capabilities, IoT devices need to send their respective tasks to cloud service stations that are usually located at far distances. Having to transmit data far distances introduces challenges for services that require low latency such as industrial control in factories and plants as well as artificial intelligence assisted autonomous driving. To solve this issue, mobile edge computing (MEC) is deployed at the networks edge to reduce transmission time. In this regard, this study proposes a new offloading scheme for MEC-assisted ultra dense cellular networks using reinforcement learning (RL) techniques. The proposed scheme enables efficient resource allocation and dynamic offloading decisions based on varying network conditions and user demands. The RL algorithm learns from the networks historical data and adapts the offloading decisions to optimize the networks overall performance. Non-orthogonal multiple access is also adopted to improve resource utilization among the IoT devices. Simulation results demonstrate that the proposed scheme outperforms other stateof the art offloading algorithms in terms of energy efficiency, network throughput, and user satisfaction.
△ Less
Submitted 20 June, 2025;
originally announced June 2025.
-
Robust Energy-Efficient DRL-Based Optimization in UAV-Mounted RIS Systems with Jitter
Authors:
Mahmoud M. Salim,
Khaled M. Rabie,
Ali H. Muqaibel
Abstract:
In this letter, we propose an energy-efficient design for an unmanned aerial vehicle (UAV)-mounted reconfigurable intelligent surface (RIS) communication system with nonlinear energy harvesting (EH) and UAV jitter. A joint optimization problem is formulated to maximize the EH efficiency of the UAV-mounted RIS by controlling the user powers, RIS phase shifts, and time-switching factor, subject to q…
▽ More
In this letter, we propose an energy-efficient design for an unmanned aerial vehicle (UAV)-mounted reconfigurable intelligent surface (RIS) communication system with nonlinear energy harvesting (EH) and UAV jitter. A joint optimization problem is formulated to maximize the EH efficiency of the UAV-mounted RIS by controlling the user powers, RIS phase shifts, and time-switching factor, subject to quality of service and practical EH constraints. The problem is nonconvex and time-coupled due to UAV angular jitter and nonlinear EH dynamics, making it intractable for conventional optimization methods. To address this, we reformulate the problem as a deep reinforcement learning (DRL) environment and develop a smoothed softmax dual deep deterministic policy gradient algorithm. The proposed method incorporates action clipping, entropy regularization, and softmax-weighted Q-value estimation to improve learning stability and exploration. Simulation results show that the proposed algorithm converges reliably under various UAV jitter levels and achieves an average EH efficiency of 45.07\%, approaching the 53.09\% upper bound of exhaustive search, and outperforming other DRL baselines.
△ Less
Submitted 22 June, 2025;
originally announced June 2025.
-
Energy-Efficient UAV-Mounted RIS for IoT: A Hybrid Energy Harvesting and DRL Approach
Authors:
Mahmoud M. Salim,
Khaled M. Rabie,
Ali H. Muqaibel
Abstract:
Many future Internet of Things (IoT) applications are expected to rely heavily on reconfigurable intelligent surface (RIS)-aided unmanned aerial vehicles (UAVs). However, the endurance of such systems is constrained by the limited onboard energy, where frequent recharging or battery replacements are required. This consequently disrupts continuous operation and may be impractical in disaster scenar…
▽ More
Many future Internet of Things (IoT) applications are expected to rely heavily on reconfigurable intelligent surface (RIS)-aided unmanned aerial vehicles (UAVs). However, the endurance of such systems is constrained by the limited onboard energy, where frequent recharging or battery replacements are required. This consequently disrupts continuous operation and may be impractical in disaster scenarios. To address this challenge, we explore a dual energy harvesting (EH) framework that integrates time-switching (TS), power-splitting (PS), and element-splitting (ES) EH protocols for radio frequency energy, along with solar energy as a renewable source. First, we present the proposed system architecture and EH operating protocols, introducing the proposed hybrid ES-TS-PS EH strategy to extend UAV-mounted RIS endurance. Next, we outline key application scenarios and the associated design challenges. After that, a deep reinforcement learning-based framework is introduced to maximize the EH efficiency by jointly optimizing UAV trajectory, RIS phase shifts, and EH strategies. The framework considers dual EH, hardware impairments, and channel state information imperfections to reflect real-world deployment conditions. The optimization problem is formulated as a Markov decision process and solved using an enhanced deep deterministic policy gradient algorithm, incorporating clipped double Q-learning and softmax-based Q-value estimation for improved stability and efficiency. The results demonstrate significant performance gains compared to the considered baseline approaches. Finally, possible challenges and open research directions are presented, highlighting the transformative potential of energy-efficient UAV-mounted RIS networks for IoT systems.
△ Less
Submitted 21 April, 2025;
originally announced April 2025.
-
Energy-Efficient Irregular RIS-aided UAV-Assisted Optimization: A Deep Reinforcement Learning Approach
Authors:
Mahmoud M. Salim,
Khaled M. Rabie,
Ali H. Muqaibel
Abstract:
Reconfigurable intelligent surfaces (RISs) enhance unmanned aerial vehicles (UAV)-assisted communication by extending coverage, improving efficiency, and enabling adaptive beamforming. This paper investigates a multiple-input single-output system where a base station (BS) communicates with multiple single-antenna users through a UAV-assisted RIS, dynamically adapting to user mobility to maintain s…
▽ More
Reconfigurable intelligent surfaces (RISs) enhance unmanned aerial vehicles (UAV)-assisted communication by extending coverage, improving efficiency, and enabling adaptive beamforming. This paper investigates a multiple-input single-output system where a base station (BS) communicates with multiple single-antenna users through a UAV-assisted RIS, dynamically adapting to user mobility to maintain seamless connectivity. To extend UAV-RIS operational time, we propose a hybrid energy-harvesting resource allocation (HERA) strategy that leverages the irregular RIS ON/OFF capability while adapting to BS-RIS and RIS-user channels. The HERA strategy dynamically allocates resources by integrating non-linear radio frequency energy harvesting (EH) based on the time-switching (TS) approach and renewable energy as a complementary source. A non-convex mixed-integer nonlinear programming problem is formulated to maximize EH efficiency while satisfying quality-of-service, power, and energy constraints under channel state information and hardware impairments. The optimization jointly considers BS transmit power, RIS phase shifts, TS factor, and RIS element selection as decision variables. To solve this problem, we introduce the energy-efficient deep deterministic policy gradient (EE-DDPG) algorithm. This deep reinforcement learning (DRL)-based approach integrates action clipping and softmax-weighted Q-value estimation to mitigate estimation errors. Simulation results demonstrate that the proposed HERA method significantly improves EH efficiency, reaching up to 81.5\% and 73.2\% in single-user and multi-user scenarios, respectively, contributing to extended UAV operational time. Additionally, the proposed EE-DDPG model outperforms existing DRL algorithms while maintaining practical computational complexity.
△ Less
Submitted 21 April, 2025;
originally announced April 2025.
-
Outage Performance of Fluid Antenna System (FAS)-aided Terahertz Communication Networks
Authors:
Leila Tlebaldiyeva,
Sultangali Arzykulov,
Khaled M. Rabie,
Xingwang Li,
Galymzhan Nauryzbayev
Abstract:
Millimeter-wave networks have already been successfully rolled out in many countries and now the research direction heads toward new technologies and standards to enable Tbps rates for future sixth-generation (6G) wireless communication systems. This work studies a point-to-point terahertz (THz) communication network exploiting the concept of a fluid antenna system (FAS) over correlated alpha-mu f…
▽ More
Millimeter-wave networks have already been successfully rolled out in many countries and now the research direction heads toward new technologies and standards to enable Tbps rates for future sixth-generation (6G) wireless communication systems. This work studies a point-to-point terahertz (THz) communication network exploiting the concept of a fluid antenna system (FAS) over correlated alpha-mu fading channels, nicely fitting the THz communication. Furthermore, the considered system is expanded to the selection-combining-FAS (SC-FAS) and maximum-gain-combining- FAS (MGC-FAS) diversity variates at the receiver side. The proposed FAS and its diversity configuration techniques are aimed to combat the high path loss, blockages, and molecular absorption effect related to the THz band. Our contribution includes comprehensive outage probability (OP) performance analysis for the THz band given the non-diversity and diversity FAS receivers. Moreover, the derived outage probability formulas are verified via Monte Carlo simulations. Numerical results have confirmed the superior performance of the MGC-FAS scheme in terms of OP. Finally, this work justifies that a higher number of antenna ports dramatically improves the system performance, even in the presence of correlation.
△ Less
Submitted 21 January, 2023;
originally announced January 2023.
-
IRS-Assisted Millimeter-wave Massive MIMO with Transmit Antenna Selection for IoT Networks
Authors:
Taissir Y. Elganimi,
Khaled M. Rabie,
Galymzhan Nauryzbayev
Abstract:
An intelligent reflecting surface (IRS)-assisted millimeter-wave (mmWave) massive multiple input multiple output (MIMO) system with transmit antenna selection (TAS) using orthogonal space-time block codes (OSTBC) scheme is proposed in this paper. This system combines TAS and IRS with hybrid analog-digital beamforming (HBF) for 60 GHz mmWave communications in order to exploit the benefits of TAS, O…
▽ More
An intelligent reflecting surface (IRS)-assisted millimeter-wave (mmWave) massive multiple input multiple output (MIMO) system with transmit antenna selection (TAS) using orthogonal space-time block codes (OSTBC) scheme is proposed in this paper. This system combines TAS and IRS with hybrid analog-digital beamforming (HBF) for 60 GHz mmWave communications in order to exploit the benefits of TAS, OSTBC, analog beamforming (ABF), and transmit digital precoding techniques. The proposed system, however, benefits from the transmit diversity gain of OSTBC scheme as well as from the signal-to-noise ratio (SNR) gains of both the beamformer and the IRS technology. The simulation results demonstrate that TAS-OSTBC system with zero-forcing precoding technique outperforms the conventional TAS system with OSTBC scheme. Furthermore, the bit error rate (BER) performance significantly im-proves as the number of antenna array elements increases due to providing a beamforming gain. In addition, increasing the number of reflecting elements further enhances the error performance. It is also found from the simulation results that the TAS-OSTBC system with hybrid precoding has better BER performance than that of TAS-OSTBC with ABF, and IRS-assisted systems significantly outperform the conventional systems without the IRS technology. This makes the proposed IRS-assisted system an appealing solution for internet-of-things (IoT) networks.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
Time-Indexed Parallel Spatial Modulation for Large-scale MIMO Systems with Antenna Grouping
Authors:
Taissir Y. Elganimi,
Khaled M. Rabie
Abstract:
A novel space-time parallel index modulation scheme is proposed in this paper for conveying extra digital information with the aid of space and time indices. In this proposed scheme, time-indexing is cleverly performed in parallel spatial modulation (PSM) schemes using transmit antenna grouping, and referred to as time-indexed parallel spatial modulation (TI-PSM). In this scheme, transmit antennas…
▽ More
A novel space-time parallel index modulation scheme is proposed in this paper for conveying extra digital information with the aid of space and time indices. In this proposed scheme, time-indexing is cleverly performed in parallel spatial modulation (PSM) schemes using transmit antenna grouping, and referred to as time-indexed parallel spatial modulation (TI-PSM). In this scheme, transmit antennas are divided into groups to adopt TI-SM scheme in large-scale multiple input multiple output (MIMO) systems with inter-channel interference (ICI) avoidance. This scheme is attractive due to both the high data rate and good performance improvement that can be achieved. The bit error rate (BER) performance of the TI-PSM scheme is evaluated and compared to that of the conventional schemes. Simulation results demonstrated that a significant improvement is achieved by the TI-PSM scheme as compared to the TI-SM and PSM schemes for the same achieved rate. It is also shown that TI-SM and TI-PSM schemes provide higher performance drop with channel estimation errors (CEEs) than the conventional SM and PSM systems. Therefore, due to the high performance improvements achieved in TI-PSM scheme, it can be effectively regarded as a promising solution for various 5G and beyond wireless networks.
△ Less
Submitted 13 March, 2021;
originally announced March 2021.
-
Multidimensional Generalized Quadrature Index Modulation for 5G Wireless Communications
Authors:
Taissir Y. Elganimi,
Khaled M. Rabie
Abstract:
Multidimensional generalized quadrature index modulation scheme is proposed in this paper for conveying extra digital information with the aid of the space, radio frequency (RF) mirrors, and time indices. Explicitly, this proposed scheme cleverly combines another proposed time-indexed generalized quadrature spatial modulation (TI-GQSM) system with media-based modulation (MBM) transmission principl…
▽ More
Multidimensional generalized quadrature index modulation scheme is proposed in this paper for conveying extra digital information with the aid of the space, radio frequency (RF) mirrors, and time indices. Explicitly, this proposed scheme cleverly combines another proposed time-indexed generalized quadrature spatial modulation (TI-GQSM) system with media-based modulation (MBM) transmission principle using RF mirrors, and it is referred to as TI-GQSM-MBM scheme. This scheme is attractive because of both the high data rate and the significant performance improvements that can be achieved. The system performance of the proposed schemes in terms of the bit error rate (BER) is evaluated and compared to the performance of the conventional schemes. Simulation results showed that a significant improvement is achieved by the TI-GQSM-MBM scheme as compared to that of TI-GQSM, time-indexed media-based modulation (TI-MBM) and the conventional generalized quadrature spatial modulation (GQSM) schemes for the same rate. It is also demonstrated that the proposed schemes are robust to channel estimation errors (CEEs) as compared to multidimensional generalized spatial modulation (GSM) schemes. Therefore, the proposed schemes can be effectively used as an alternative solution for various 5G and beyond wireless networks.
△ Less
Submitted 12 March, 2021;
originally announced March 2021.
-
Reconfigurable Intelligent Surfaces based Cognitive Radio Networks
Authors:
Abubakar U. Makarfi,
Rupak Kharel,
Khaled M. Rabie,
Omprakash Kaiwartya,
Xingwang Li,
Dinh-Thuan Do
Abstract:
Over the last decade, cognitive radios (CRs) have emerged as a technology for improving spectrum efficiency through dynamic spectrum access techniques. More recently, as research interest is shifting beyond 5G communications, new technologies such as reconfigurable intelligent surfaces (RISs) have emerged as enablers of smart radio environments, to further improve signal coverage and spectrum mana…
▽ More
Over the last decade, cognitive radios (CRs) have emerged as a technology for improving spectrum efficiency through dynamic spectrum access techniques. More recently, as research interest is shifting beyond 5G communications, new technologies such as reconfigurable intelligent surfaces (RISs) have emerged as enablers of smart radio environments, to further improve signal coverage and spectrum management capabilities. Based on the promise of CRs and RISs, this paper seeks to investigate the concept of adopting both concepts within a network as a means of maximizing the potential benefits available. The paper considers two separate models of RIS-based networks and analyzes several performance metrics associated with the CR secondary user. Monte Carlo simulations are presented to validate the derived expressions. The results indicate the effects of key parameters of the system and the clear improvement of the CR network, in the presence of a RIS-enhanced primary network.
△ Less
Submitted 25 August, 2020;
originally announced August 2020.
-
On the Construction of Polar Codes in the Middleton Class-A Channels
Authors:
Ammar Hadi,
Emad Alsusa,
Khaled M. Rabie
Abstract:
Although power line communication (PLC) systems are available everywhere, unfortunately these systems are not suitable for information transmission due to the effects of the impulsive noise. Therefore, many previous studies on channel codes have been carried out for the purpose of reducing the impulsive noise in such channels. This paper investigates some methods for the construction of polar code…
▽ More
Although power line communication (PLC) systems are available everywhere, unfortunately these systems are not suitable for information transmission due to the effects of the impulsive noise. Therefore, many previous studies on channel codes have been carried out for the purpose of reducing the impulsive noise in such channels. This paper investigates some methods for the construction of polar codes under PLC systems in the presence of Middleton class-A noise. We discuss here the most feasible construction methods which already have been adopted with other channels. In addition, we present an illustrative example for the construction in these methods and also we discuss a comparison between the methods in terms of performance.
△ Less
Submitted 7 July, 2020;
originally announced July 2020.
-
Reconfigurable Intelligent Surfaces-Enabled Vehicular Networks: A Physical Layer Security Perspective
Authors:
Abubakar U. Makarfi,
Khaled M. Rabie,
Omprakash Kaiwartya,
Kabita Adhikari,
Xingwang Li,
Marcela Quiroz-Castellanos,
Rupak Kharel
Abstract:
This paper studies the physical layer security (PLS) of a vehicular network employing reconfigurable intelligent surfaces (RISs). RIS technologies are emerging as an important paradigm for the realisation of next-generation smart radio environments, where large numbers of small, low-cost and passive elements, reflect the incident signal with an adjustable phase shift without requiring a dedicated…
▽ More
This paper studies the physical layer security (PLS) of a vehicular network employing reconfigurable intelligent surfaces (RISs). RIS technologies are emerging as an important paradigm for the realisation of next-generation smart radio environments, where large numbers of small, low-cost and passive elements, reflect the incident signal with an adjustable phase shift without requiring a dedicated energy source. Inspired by the promising potential of RIS-based transmission, we investigate the PLS of two vehicular network system models: One with vehicle-to-vehicle communication with the source employing a RIS-based access point, and the other is in the form of a vehicular adhoc network (VANET), with a RIS-based relay deployed on a building; both models assume the presence of an eavesdropper. The performance of the proposed systems are evaluated in terms of the average secrecy capacity (ASC) and the secrecy outage probability (SOP). We present accurate analytical expressions for the two performance metrics and study the impact of various system parameters on the overall performance of the two considered system configurations. Monte-Carlo simulations are provided throughout to validate the results. The results show that performance of the system in terms of the ASC and SOP is affected by the location of the RIS-relay as well as the number of RIS cells. Moreover, upto an order magnitude gain could be achieved within certain regions when the number of RIS cells are doubled, clearly indicating the benefit of employing a RIS configuration.
△ Less
Submitted 1 April, 2020;
originally announced April 2020.
-
Physical Layer Security in Vehicular Networks with Reconfigurable Intelligent Surfaces
Authors:
Abubakar U. Makarfi,
Khaled M. Rabie,
Omprakash Kaiwartya,
Xingwang Li,
Rupak Kharel
Abstract:
This paper studies the physical layer security (PLS) of a vehicular network employing a reconfigurable intelligent surface (RIS). RIS technologies are emerging as an important paradigm for the realisation of smart radio environments, where large numbers of small, low-cost and passive elements, reflect the incident signal with an adjustable phase shift without requiring a dedicated energy source. I…
▽ More
This paper studies the physical layer security (PLS) of a vehicular network employing a reconfigurable intelligent surface (RIS). RIS technologies are emerging as an important paradigm for the realisation of smart radio environments, where large numbers of small, low-cost and passive elements, reflect the incident signal with an adjustable phase shift without requiring a dedicated energy source. Inspired by the promising potential of RIS-based transmission, we investigate two vehicular network system models: One with vehicle-to-vehicle communication with the source employing a RIS-based access point, and the other model in the form of a vehicular adhoc network (VANET), with a RIS-based relay deployed on a building. Both models assume the presence of an eavesdropper, to investigate the average secrecy capacity of the considered systems. Monte-Carlo simulations are provided throughout to validate the results. The results show that performance of the system in terms of the secrecy capacity is affected by the location of the RIS-relay and the number of RIS cells. The effect of other system parameters such as source power and eavesdropper distances are also studied.
△ Less
Submitted 23 December, 2019;
originally announced December 2019.
-
Reconfigurable Intelligent Surface Enabled IoT Networks in Generalized Fading Channels
Authors:
Abubakar U. Makarfi,
Khaled M. Rabie,
Omprakash Kaiwartya,
Osamah S. Badarneh,
Xingwang Li,
Rupak Kharel
Abstract:
This paper studies an Internet-of-Things (IoT) network employing a reconfigurable intelligent surface (RIS) over generalized fading channels. Inspired by the promising potential of RIS-based transmission, we investigate a RIS-enabled IoT network with the source node employing a RIS-based access point. The system is modelled with reference to a receiver transmitter pair and the Fisher-Snedecor F mo…
▽ More
This paper studies an Internet-of-Things (IoT) network employing a reconfigurable intelligent surface (RIS) over generalized fading channels. Inspired by the promising potential of RIS-based transmission, we investigate a RIS-enabled IoT network with the source node employing a RIS-based access point. The system is modelled with reference to a receiver transmitter pair and the Fisher-Snedecor F model is adopted to analyse the composite fading and shadowing channel. Closed-form expressions are derived for the system with regards to the average capacity, average bit error rate (BER) and outage probability. Monte-Carlo simulations are provided throughout to validate the results. The results investigated and reported in this study extend early results reported in the emerging literature on RIS-enabled technologies and provides a framework for the evaluation of a basic RIS-enabled IoT network over the most common multipath fading channels. The results indicate the clear benefit of employing a RIS-enabled access point, as well as the versatility of the derived expressions in analysing the effects of fading and shadowing on the network. The results further demonstrate that for a RIS-enabled IoT network, there is the need to balance between the cost and benefit of increasing the RIS cells against other parameters such as increasing transmit power, especially at low SNR and/or high to moderate fading/shadowing severity.
△ Less
Submitted 12 December, 2019;
originally announced December 2019.
-
Physical Layer Security in Vehicular Communication Networks in the Presence of Interference
Authors:
Abubakar U. Makarfi,
Rupak Kharel,
Khaled M. Rabie,
Omprakash Kaiwartya,
Galymzhan Nauryzbayev
Abstract:
This paper studies the physical layer security of a vehicular communication network in the presence of interference constraints by analysing its secrecy capacity. The system considers a legitimate receiver node and an eavesdropper node, within a shared network, both under the effect of interference from other users. The double-Rayleigh fading channel is used to capture the effects of the wireless…
▽ More
This paper studies the physical layer security of a vehicular communication network in the presence of interference constraints by analysing its secrecy capacity. The system considers a legitimate receiver node and an eavesdropper node, within a shared network, both under the effect of interference from other users. The double-Rayleigh fading channel is used to capture the effects of the wireless communication channel for the vehicular network. We present the standard logarithmic expression for the system capacity in an alternate form, to facilitate analysis in terms of the joint moment generating functions (MGF) of the random variables representing the channel fading and interference. Closed-form expressions for the MGFs are obtained and Monte-Carlo simulations are provided throughout to validate the results. The results show that performance of the system in terms of the secrecy capacity is affected by the number of interferers and their distances. The results further demonstrate the effect of the uncertainty in eavesdropper location on the analysis.
△ Less
Submitted 18 November, 2019;
originally announced November 2019.
-
On the Performance of DF-based Power-Line/Visible-Light Communication Systems
Authors:
Waled Gheth,
Khaled M. Rabie,
Bamidele Adebisi,
Muhammad Ijaz,
Georgina Harris
Abstract:
This paper presents a comprehensive performance analysis of an integrated indoor power line communication (PLC)/visible light communication (VLC) system with the presence of a decode-and-forward (DF) relay. The existing indoor power line networks are used as the backbone for VLCs. The performance of the proposed system is evaluated in terms of the average capacity and the outage probability. A new…
▽ More
This paper presents a comprehensive performance analysis of an integrated indoor power line communication (PLC)/visible light communication (VLC) system with the presence of a decode-and-forward (DF) relay. The existing indoor power line networks are used as the backbone for VLCs. The performance of the proposed system is evaluated in terms of the average capacity and the outage probability. A new unified mathematical method is developed for the PLC/VLC system and analytical expressions for the aforementioned performance metrics are derived. Monte Carlo simulations are provided throughout the paper to verify the correctness of the analysis. The results reveal that the performance of the proposed system deteriorates with increasing the end-to-end distance and improves with increasing the relay transmit power. It is also shown that the outage probability of the system under consideration is negatively affected by the vertical distance to user plane.
△ Less
Submitted 9 October, 2018;
originally announced October 2018.
-
Outage Probability of the EH-based Full-Duplex AF and DF Relaying Systems in α-μEnvironment
Authors:
Galymzhan Nauryzbayev,
Mohamed Abdallah,
Khaled M. Rabie
Abstract:
Wireless power transfer and energy harvesting have attracted a significant research attention in terms of their application in cooperative relaying systems. Most of existing works in this field focus on the half-duplex (HD) relaying mechanism over certain fading channels, however, in contrast, this paper considers a dual-hop full-duplex (FD) relaying system over a generalized independent but not i…
▽ More
Wireless power transfer and energy harvesting have attracted a significant research attention in terms of their application in cooperative relaying systems. Most of existing works in this field focus on the half-duplex (HD) relaying mechanism over certain fading channels, however, in contrast, this paper considers a dual-hop full-duplex (FD) relaying system over a generalized independent but not identically distributed α-μfading channel, where the relay node is energy-constrained and entirely depends on the energy signal from the source node. Three special cases of the α-μmodel are investigated, namely, Rayleigh, Nakagami-m and Weibull fading. As the system performance, we investigate the outage probability (OP) for which we derive exact unified closed-form expressions. The provided Monte Carlo simulations validate the accuracy of our analysis. Moreover, the results obtained for the FD scenario are compared to the ones related to the HD. The results demonstrate that the decode-andforward relaying outperforms the amplify-and-forward relaying for both HD and FD scenarios. It is also shown that the FD scenario performs better than the HD relaying systems. Finally, we analyzed the impact of the fading parameters αand μon the achievable OP.
△ Less
Submitted 7 August, 2018;
originally announced August 2018.
-
Performance Evaluation of Multi-hop Relaying over Non-Gaussian PLC Channels
Authors:
Khaled M. Rabie,
Bamidele Adebisi,
Haris Gacanin,
Galymzhan Nauryzbayev,
Augustine Ikpehai
Abstract:
Relaying over power line communication (PLC) channels can considerably enhance the performance and reliability of PLC systems. This paper is dedicated to study and analyze the energy efficiency of multi-hop cooperative relaying PLC systems. Incremental decode-and-forward (IDF) relying is exploited to reduce the transmit power consumption. The PLC channel is assumed to experience log-normal fading…
▽ More
Relaying over power line communication (PLC) channels can considerably enhance the performance and reliability of PLC systems. This paper is dedicated to study and analyze the energy efficiency of multi-hop cooperative relaying PLC systems. Incremental decode-and-forward (IDF) relying is exploited to reduce the transmit power consumption. The PLC channel is assumed to experience log-normal fading with impulsive noise. The performances of single-hop and conventional DF relaying systems are also analyzed in terms of outage probability and energy efficiency for which analytical expressions are derived. Results show that using more relays can improve the outage probability performance; however, this is achieved at the expense of increased power consumption due to the increased static power of the relays, especially when the total source-to-destination distance is relatively small. Results also demonstrate that the IDF PLC system has better energy efficiency performance compared to the other schemes.
△ Less
Submitted 1 August, 2018;
originally announced August 2018.
-
Performance Analysis of Integrated Power-Line/Visible-Light Communication Systems with AF Relaying
Authors:
Waled Gheth,
Khaled M. Rabie,
Bamidele Adebisi,
Muhammad Ijaz,
Georgina Harris
Abstract:
Reliable data transmissions and offering better mobility to the end user can be achieved by integrating different communication systems. In this paper, we investigate the performance of a cascaded indoor power line communication (PLC)/visible light communication (VLC) system with the presence of an amplify-and-forward (AF) relay. Using the pre-installed infrastructure of electricity wiring network…
▽ More
Reliable data transmissions and offering better mobility to the end user can be achieved by integrating different communication systems. In this paper, we investigate the performance of a cascaded indoor power line communication (PLC)/visible light communication (VLC) system with the presence of an amplify-and-forward (AF) relay. Using the pre-installed infrastructure of electricity wiring networks gives the advantage to use PLC as a backbone for VLCs. The performance of the proposed hybrid system is discussed in terms of the average capacity. A mathematical method is developed for this network to formulate the capacity by exploiting the statistical properties of both the PLC and VLC channels. The derived analytical expressions are validated by Monte Carlo simulations. The results showed that there is a considerable improvement in the performance of the hybrid system as the relay gain increases whereas it deteriorates with increasing the end-to-end distance. A comparison between the performance of a parallel hybrid/PLC and hybrid systems is also provided. It is found that the hybrid/PLC system outperforms the hybrid one. However, the user mobility offered by the latter system remains the main advantage over the former approach.
△ Less
Submitted 26 July, 2018;
originally announced July 2018.
-
Half-Duplex and Full-Duplex AF and DF Relaying with Energy-Harvesting in Log-Normal Fading
Authors:
Khaled M. Rabie,
Bamidele Adebisi,
Mohamed-Slim Alouini
Abstract:
Energy-harvesting (EH) and wireless power transfer in cooperative relaying networks have recently attracted a considerable amount of research attention. Most of the existing work on this topic however focuses on Rayleigh fading channels, which represent outdoor environments. In contrast, this paper is dedicated to analyze the performance of dual-hop relaying systems with EH over indoor channels ch…
▽ More
Energy-harvesting (EH) and wireless power transfer in cooperative relaying networks have recently attracted a considerable amount of research attention. Most of the existing work on this topic however focuses on Rayleigh fading channels, which represent outdoor environments. In contrast, this paper is dedicated to analyze the performance of dual-hop relaying systems with EH over indoor channels characterized by log-normal fading. Both half-duplex (HD) and full-duplex (FD) relaying mechanisms are studied in this work with decode-and-forward (DF) and amplify-and-forward (AF) relaying protocols. In addition, three EH schemes are investigated, namely, time switching relaying, power splitting relaying and ideal relaying receiver which serves as a lower bound. The system performance is evaluated in terms of the ergodic outage probability for which we derive accurate analytical expressions. Monte Carlo simulations are provided throughout to validate the accuracy of our analysis. Results reveal that, in both HD and FD scenarios, AF relaying performs only slightly worse than DF relaying which can make the former a more efficient solution when the processing energy cost at the DF relay is taken into account. It is also shown that FD relaying systems can generally outperform HD relaying schemes as long as the loop-back interference in FD is relatively small. Furthermore, increasing the variance of the log-normal channel has shown to deteriorate the performance in all the relaying and EH protocols considered.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
-
Vector OFDM Transmission over Non-Gaussian Power Line Communication Channels
Authors:
Bamidele Adebisi,
Khaled M. Rabie,
Augustine Ikpehai,
Cinna Soltanpur,
Andrew Wells
Abstract:
Most of the recent power line communication (PLC) systems and standards, both narrow-band and broadband, are based on orthogonal frequency-division multiplexing (OFDM). This multiplexing scheme however suffers from the high peak-to-average power ratio (PAPR) which can considerably impact the energy efficiency, size and cost of PLC modems as well as cause electromagnetic compatibility (EMC) issues.…
▽ More
Most of the recent power line communication (PLC) systems and standards, both narrow-band and broadband, are based on orthogonal frequency-division multiplexing (OFDM). This multiplexing scheme however suffers from the high peak-to-average power ratio (PAPR) which can considerably impact the energy efficiency, size and cost of PLC modems as well as cause electromagnetic compatibility (EMC) issues. This paper investigates the performance of vector OFDM (VOFDM), which has inherently better PAPR properties, over non-Gaussian broadband PLC channels equipped with two nonlinear preprocessors at the receiver. In addition, the low PAPR property of the VOFDM system is exploited to further enhance the efficiency of the nonlinear preprocessors. The achievable gains are studied in terms of the complementary cumulative distribution function of the PAPR, probability of noise detection error and the signal-to-noise ratio at the output of the nonlinear preprocessors. For comparison's sake, the performance of conventional OFDM systems is also presented throughout the paper. Results reveal that the proposed system is able to provide up to 2 dB saving in the transmit power relative to the conventional OFDM under same system conditions, which eventually also translates into a system that is more resilient to EMC limits, reduced cost and size of PLC modems. It is also shown that the achievable gains become more significant as the vector block (VB) size of the VOFDM system is increased.
△ Less
Submitted 26 June, 2018;
originally announced June 2018.
-
Hybrid Power-Line/Wireless Communication Systems For Indoor Applications
Authors:
Waled Gheth,
Khaled M. Rabie,
Bamidele Adebisi,
Muhammad Ijaz,
Georgina Harris,
A. Alfitouri
Abstract:
The high attenuation which increases as frequency increases in power line communication systems (PLC) makes achieving and sustaining high data rates over such channels a challenging task. In most communication systems, relays are normally deployed to overcome the effect of signal attenuation and to achieve reliable transmissions between users. Amplifyand- forward (AF) and decode-and-forward (DF) r…
▽ More
The high attenuation which increases as frequency increases in power line communication systems (PLC) makes achieving and sustaining high data rates over such channels a challenging task. In most communication systems, relays are normally deployed to overcome the effect of signal attenuation and to achieve reliable transmissions between users. Amplifyand- forward (AF) and decode-and-forward (DF) relays are often used. In contrast to the existing work on this topic which advocate utilizing relays either between PLC links or between wireless links, the authors of this paper focus on using AF relaying for in-home PLC and wireless systems where one PLC user wants to share data with one wireless user which has no access to the PLC network. We refer to this system as the Hybrid approach. A mathematical method is developed for this network to formulate the capacity of the system by exploiting the statistical properties of both PLC and wireless channels. Monte Carlo simulations are used throughout this paper to validate the analytical results. The impact of several system parameters is investigated in this paper. For the sake of comparison, we also provide the performance analysis and results for a PLC only network. The results showed that the performance of the hybrid system enhances as we increase the relay gain and deteriorates as the end-to-end distance increases. It is also found that the PLC only scheme may outperform the hybrid one if the relay gain is relatively small; however, the user mobility offered by the hybrid system remains the main advantage over the PLC only system.
△ Less
Submitted 26 June, 2018;
originally announced June 2018.
-
Wireless Power Transfer in Cooperative DF Relaying Networks with Log-Normal Fading
Authors:
Khaled M. Rabie,
Bamidele Adebisi,
Mohamed-Slim Alouini
Abstract:
Energy-harvesting and wireless power transfer in cooperative relaying networks have recently attracted a considerable amount of research attention. Most of the existing work on this topic however focuses on Rayleigh fading channels which represents outdoor environments. Unlike these studies, in this paper we analyze the performance of wireless power transfer in two-hop decode-and-forward (DF) coop…
▽ More
Energy-harvesting and wireless power transfer in cooperative relaying networks have recently attracted a considerable amount of research attention. Most of the existing work on this topic however focuses on Rayleigh fading channels which represents outdoor environments. Unlike these studies, in this paper we analyze the performance of wireless power transfer in two-hop decode-and-forward (DF) cooperative relaying systems in indoor channels characterized by log-normal fading. Three well-known energy-harvesting protocols are considered in our evaluations: a) time-switching relaying (TSR), b) power-splitting relaying (PSR) and c) ideal relaying receiver (IRR). The performance is evaluated in terms of the ergodic outage probability for which we derive accurate analytical expressions for the three systems under consideration. Results reveal that careful selection of the energy-harvesting time and power-splitting factors in the TSR- and PSR-based system are important to optimize performance. It is also presented that the optimized PSR system has near-ideal performance and that increasing the source transmit power and/or the energy-harvester efficiency can further improve performance.
△ Less
Submitted 25 June, 2018;
originally announced June 2018.
-
Ergodic Capacity Analysis of Wireless Powered AF Relaying Systems over $α$-$μ$ Fading Channels
Authors:
Galymzhan Nauryzbayev,
Khaled M. Rabie,
Mohamed Abdallah,
Bamidele Adebisi
Abstract:
In this paper, we consider a two-hop amplify-and-forward (AF) relaying system, where the relay node is energy-constrained and harvests energy from the source node. In the literature, there are three main energy-harvesting (EH) protocols, namely, time-switching relaying (TSR), power-splitting (PS) relaying (PSR) and ideal relaying receiver (IRR). Unlike the existing studies, in this paper, we consi…
▽ More
In this paper, we consider a two-hop amplify-and-forward (AF) relaying system, where the relay node is energy-constrained and harvests energy from the source node. In the literature, there are three main energy-harvesting (EH) protocols, namely, time-switching relaying (TSR), power-splitting (PS) relaying (PSR) and ideal relaying receiver (IRR). Unlike the existing studies, in this paper, we consider $α$-$μ$ fading channels. In this respect, we derive accurate unified analytical expressions for the ergodic capacity for the aforementioned protocols over independent but not identically distributed (i.n.i.d) $α$-$μ$ fading channels. Three special cases of the $α$-$μ$ model, namely, Rayleigh, Nakagami-mandWeibull fading channels were investigated. Our analysis is verified through numerical and simulation results. It is shown that finding the optimal value of the PS factor for the PSR protocol and the EH time fraction for the TSR protocol is a crucial step in achieving the best network performance.
△ Less
Submitted 13 December, 2017;
originally announced December 2017.
